Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 555

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9839
id	ddss9839
authors	Mahdavi, Ardeshir
year	1998
title	A Middle Way to Integration
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Integration in computer-aided design denotes systematic incorporation of multiple domain applications within a unified computational design support environment. At one end of the spectrum of integration efforts, there is a top-down approach involving an all-encompassing maximal building representation. On the other end, there is bottom-up approach involving the ad hoc and as-needed production of translator and mediator routines to enable various existing applications to communicate with each other. This paper describes the development of a design support system which represents a middle way to integration: while it assumes that, at a fundamental level, some shared notation of the constitutive building entities and their spatial relationships is sine qua non, it assumes that this notation is not a primary necessity, but must be tested against the requirements of the "down-the-line" manipulators of the entities encapsulated by it.
series	DDSS
last changed	2003/08/07 16:36

_id	a136
authors	Blaise, J.Y., Dudek, I. and Drap, P.
year	1998
title	Java collaborative interface for architectural simulations A case study on wooden ceilings of Krakow
source	International Conference On Conservation - Krakow 2000, 23-24 November 1998, Krakow, Poland
summary	Concern for the architectural and urban preservation problems has been considerably increasing in the past decades, and with it the necessity to investigate the consequences and opportunities opened for the conservation discipline by the development of computer-based systems. Architectural interventions on historical edifices or in preserved urban fabric face conservationists and architects with specific problems related to the handling and exchange of a variety of historical documents and representations. The recent development of information technologies offers opportunities to favour a better access to such data, as well as means to represent architectural hypothesis or design. Developing applications for the Internet also introduces a greater capacity to exchange experiences or ideas and to invest on low-cost collaborative working platforms. In the field of the architectural heritage, our research addresses two problems: historical data and documentation of the edifice, methods of representation (knowledge modelling and visualisation) of the edifice. This research is connected with the ARKIW POLONIUM co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France) and the Institute HAiKZ of Kraków's Faculty of Architecture. The ARKIW programme deals with questions related to the use of information technologies in the recording, protection and studying of the architectural heritage. Case studies are chosen in order to experience and validate a technical platform dedicated to the formalisation and exchange of knowledge related to the architectural heritage (architectural data management, representation and simulation tools, survey methods, ...). A special focus is put on the evolution of the urban fabric and on the simulation of reconstructional hypothesis. Our contribution will introduce current ARKIW internet applications and experiences: The ARPENTEUR architectural survey experiment on Wie¿a Ratuszowa (a photogrammetrical survey based on an architectural model). A Gothic and Renaissance reconstruction of the Ratusz Krakowski using a commercial modelisation and animation software (MAYA). The SOL on line documentation interface for Kraków's Rynek G_ówny. Internet analytical approach in the presentation of morphological informations about Kraków's Kramy Bogate Rynku Krakowskiego. Object-Orientation approach in the modelling of the architectural corpus. The VALIDEUR and HUBLOT Virtual Reality modellers for the simulation and representation of reconstructional hypothesis and corpus analysis.
series	other
last changed	2003/04/23 15:14

_id	ddss9808
id	ddss9808
authors	Boelen, A.J.
year	1998
title	Pattern Matching for Decision Support
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In this paper is discussed how we can use pattern matching techniques in combination with object orientation to support decision makers in arranging offices and industrial and commercial facilities in existing urban areas. The method used is based on the findings of a Ph.D. project almost finishedwhen writing this. The tool under development is specifically useful for rehabilitation of deteriorated industrial or commercial areas.I consider such an area already occupied and surrounded with all kinds of urban objects and connected to all kinds of infrastructure. I can describe this area in available objects and facilities. Furthermore we can describe the areas capacity left within the infrastructure, the capacity in forexample work force or clients and the available band width in noise or pollution. By describing the area in terms of availability of capacity to absorb or produce flows of people, goods, energy and information we sketch the room available for certain types of industrial or commercial facilities. I developed a technique to describe industrial and commercial facilities in such a way that we enable the match between these and the characteristics of an area available. Pattern matching techniquesenable the system to generate best matches between available areas, locations and facilities. This model can be adapted in several object oriented geographical information systems and be integrated with other information systems that for example calculate the pollution of certain kinds of facilities. The rules to match with are partly based on objective, measurable data like available capacity on the electricity network and needed electrical power for certain facilities. Other matching rules are based on political norms on for example acceptable pollution levels and suggested pollution of facilities. The paper presents the problem area of industrial area rehabilitation, describes the architecture of the modeling technique and presents the first findings of implementation studies.
keywords	Pattern matching, Object GIS, Urban object modeling, Facility planning
series	DDSS
last changed	2003/11/21 15:16

_id	ga9921
id	ga9921
authors	Coates, P.S. and Hazarika, L.
year	1999
title	The use of genetic programming for applications in the field of spatial composition
source	International Conference on Generative Art
summary	Architectural design teaching using computers has been a preoccupation of CECA since 1991. All design tutors provide their students with a set of models and ways to form, and we have explored a set of approaches including cellular automata, genetic programming ,agent based modelling and shape grammars as additional tools with which to explore architectural ( and architectonic) ideas.This paper discusses the use of genetic programming (G.P.) for applications in the field of spatial composition. CECA has been developing the use of Genetic Programming for some time ( see references ) and has covered the evolution of L-Systems production rules( coates 1997, 1999b), and the evolution of generative grammars of form (Coates 1998 1999a). The G.P. was used to generate three-dimensional spatial forms from a set of geometrical structures .The approach uses genetic programming with a Genetic Library (G.Lib) .G.P. provides a way to genetically breed a computer program to solve a problem.G. Lib. enables genetic programming to define potentially useful subroutines dynamically during a run .* Exploring a shape grammar consisting of simple solid primitives and transformations. * Applying a simple fitness function to the solid breeding G.P.* Exploring a shape grammar of composite surface objects. * Developing grammarsfor existing buildings, and creating hybrids. * Exploring the shape grammar of abuilding within a G.P.We will report on new work using a range of different morphologies ( boolean operations, surface operations and grammars of style ) and describe the use of objective functions ( natural selection) and the "eyeball test" ( artificial selection) as ways of controlling and exploring the design spaces thus defined.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	2b30
authors	Mejía, Ricardo Cuberos
year	1998
title	Integration of CAD on a Planning Support System Experiences in Urban Planning of Altagracia
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 53-74
summary	This paper relates to the group of strategies of information automation utilized for the development of a planning support system, conceived for the preparation of the urban plan of an intermediate city, with semi-industrial, tourist and fishing character, whish is located in the occident from Venezuela. Developed according the official methodology of urban analysis established for the national urban authorities, the planning support system incorporates different technical for the automated processing of information in innovative way, to obtaining each one of the products that constitute the urban plan. Such system bases on a model of integral management and structured control of cartographic and document information, databases, images and animations, respect to information fields so different as routes networks, census segments, building inventories, and tourist videos. For it, a CAD system was combined with analysis and information presentation tools, elaborated through GIS, word processors, image processors, spreadsheet, database systems, presentation programs and hypertext interfaces, under the administration of a local network area.
series	plCAD
last changed	1999/04/08 17:16

_id	ddss9801
id	ddss9801
authors	Achten, Henri and Leeuwen, Jos van
year	1998
title	A Feature-Based Description Technique for Design Processes: A Case Study
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In order to develop appropriate tools for decision support in design processes, it is necessary to found them on an understanding of design. Analytical techniques of design processes that have a direct relationship with tool development can enhance design support systems development. The paper focuses on a design support system in the VR-DIS research program. The aim of this research program is to develop insight in the architectural design process and to establish design tools for architectsworking in Virtual Reality. The basic approach for data modelling in VR in this research is based on an extension of the Feature Based Modelling paradigm taken from design in mechanical engineering. The computer model of the design in the system is a Feature-based model. This paper describes design processes in terms of changes in the Feature-based model of the design. For this purpose, a case of a house design is used. Drawings in the conceptual design phase up to the preliminary design phase arestudied. Each state of the drawings is described in terms of a Feature-model. Particular design actions such as creation of spaces, definition of architectural elements, and changes during the design process can be expressed in terms of changes in the Feature-model. Because of the use of Features, the changes can be formalised in the VR-DIS system. The description in terms of Features offers an analytical toolthat leads to a functional brief for design support tools. The paper ends with a discussion of implications and future work.
series	DDSS
last changed	2003/11/21 15:15

_id	ddss9802
id	ddss9802
authors	Akin, O., Aygen, Z., Cumming, M., Donia, M., Sen, R. and Zhang, Y.
year	1998
title	Computational Specification of Building Requirements in theEarly Stages of Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	We have been exploring computational techniques to help building designers to specify design requirements during the early stages of design. In the past, little has been accomplished in this area either in terms of innovative computational technologies or the improvement of design performance.The prospect of improving design productivity and creating a seamless process between requirements specification and formal design are our primary motivations. This research has been conducted as partof a larger project entitled SEED (Software Environment to Support Early Phases in Building Design). SEED features an open-ended modular architecture, where each module provides support for a design activity that takes place in early design stages. Each module is supported by a database to store and retrieve information, as well as a user interface to support the interaction with designers. The module described in this paper, SEED-Pro (the architectural programming module of SEED), is a workingprototype for building design requirements specification. It can be used by other modules in SEED or by design systems in other domains, such as mechanical engineering, civil engineering, industrial designand electrical engineering. Our approach to SEED-Pro is divided into two phases: core, and support functionalities. The core functionalities operate in an interactive mode relying on a case-based approach to retrieve and adapt complex specification records to the problem at hand. The supportfunctionalities include the case-base, the data-base, and the standards processing environment for building specification tasks. Our findings indicate that SEED-Pro: (1) is a tool that structures the unstructured domain of design requirements; (2) enables the integration of design requirements with the rest of the design process, (3) leads to the creation of complex case-bases and (4) enables the observation of their performance in the context of real world design problems.
series	DDSS
last changed	2003/11/21 15:15

_id	ddss9803
id	ddss9803
authors	Arentze, T., Borgers, A. and Timmermans, H.
year	1998
title	Extending spatial DSS with spatial choice models of multipurpose shopping trip behaviour
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Spatial choice or interaction models have been widely used in spatial DSS or customised GIS for analysing the impacts of retail location plans. The models typically used, however, do not account for spatial agglomeration effects on spatial choice behaviour. This study develops a model system for analysing the impacts of retail plans based on a choice model of multipurpose behaviour developed in earlier work. The model system is implemented in the spatial DSS called Location Planner. An empirical study demonstrates the empirical estimation and use of the model for analysing the impacts of an expansion of floor space in the major shopping centre of a middle-sized city in The Netherlands. The results indicate that agglomeration effects as predicted by the model can have substantial impacts on the performance of retail systems. Therefore, it is argued that when incorporated in a spatial DSS, the more complex models have the potential to improve the use of these systems for impact analysis.
series	DDSS
last changed	2003/11/21 15:16

_id	ddss9811
id	ddss9811
authors	Barbanente, A., Conte, E. and Monno, V.
year	1998
title	Changing trends and approaches in human and computer modelling for social housing policies
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The paper discusses conceptual issues, goals and preliminary results of an on-going research which aims at building a Decision Support System for public housing environmental oriented maintenance and management in a city in Southern Italy, Bari. Traditional post-war Italian housing policies are compared with more recent approaches in the field, pointing out the change from quantitative, aggregated, more simple building problems and relatedapproaches to qualitative, differentiated, complex ones integrating social, economic and environmental dimensions with the aim of regenerating deteriorated residential areas. The paper claims for the need shift, both in the human and computer areas, from traditional quantitative models to new approaches able to manage also qualitative variables, temporal dynamics, emergencies, and intentionality, since they appear key aspects of the real world to be modelled. The housing estate of Bari and its needs of maintenance and management are examined, eliciting essential related knowledge using the interview technique. The clear orientation towards sustainable policies for urban regeneration, at a local, national, and Community level, is also considered. The innovative and collaborative nature of such policies and the attention to be paid to the social aspects ofthe problem require a complex DSS, integrating various kind of hypertexts, information systems and case-based fuzzy expert systems, whose main aims, functions, software and general organisation are outlined in the paper.
series	DDSS
last changed	2003/11/21 15:16

_id	f288
authors	Bille, Pia
year	1999
title	Integrating GIS and Electronic Networks In Urban Design and Planning
doi	https://doi.org/10.52842/conf.ecaade.1999.722
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
summary	In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords	Urban Planning, Electronic Collaboration, GIS, Data Bases
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ddss9807
id	ddss9807
authors	Boelen, A.J. and Lugt, Hermen J. van der
year	1998
title	Communication of design parameters within groups
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper discusses the facilitation of worldwide concurrent design within the domains involved in environmental planning, urban design and civil engineering. Typical projects in these domains require the collaboration of many experts. Each of these has his reference framework for the taskat hand and for the variables used. The amount of variables makes it impossible for each project participant to take account for all possible impacts of proposed or planned actions. The typical project demands for a concurrent design process that enables all participants to concentrate ontheir domain of expertise. On the other hand the design process should enable them to have insight in the problems, within the domains of other experts. The system should provide a generic environment with the ability to attach domain specific knowledge. By providing this support thesystem integrates knowledge specific to various expert domains.In the PortPlan project within the LWI organization a system is being developed that supports the integration of various reference frameworks involved in environmental planning. We no longer need to develop a common language for the users. The system contains a dynamic set of scalebound reference objects for the domains involved. The system facilitates the communication of object characteristics. It also supports the presentation of these objects, in legends for each participant involved.We achieve the communication between participants using a dynamic legend. We also enable all participants to become informed on the interests of other participants. We achieve the technical communication using the exchange of interventions. We do not exchange results. This leads to alow "network traffic load" and thus enables the system to operate within the current Internet infrastructure. In this paper we present the problem area of concurrent design in environmental planning. We present this describing the background of our project, describing the overall architecture of the system and presenting the first findings of user studies.
keywords	Concurrent Design, Interfaces, Legends
series	DDSS
last changed	2003/11/21 15:16

_id	bb72
authors	Bourdot, P., Krus, M., Gherbi, R.
year	1998
title	Cooperation Between Reactive 3D Objects and a Multimodal X Window Kernel for CAD
source	Bunt, H., Beun, R.J., Borghuis, T. (Eds.). Multimodal Human-Computer Communication : Systems, Techniques, and Experiments. Berlin : Springer
summary	From the early steps of sketching to final engineering, a frequent and very important activity in designing objects is to perform graphical and spatial simulations to solve the constraints on the objects which are being designed. But when we analyse work situations involving the use of CAD systems, it is today an acknowledged fact that these tools are not helpful to perform these types of simulations. While knowledge modeling based on form feature concepts already offers some possibilities for attaching behaviour to objects, the simulation activity requires in addition a `real time' and `intelligent' management of the interactions between the 3D virtual objects and the CAD user. Our general purpose is to study how future CAD systems could be improved to achieve the simulation steps of object design. In this context we present some issues concerning the cooperation between a model of reactive 3D objects and a multimodal X Window kernel. We have developed a prototype of a system where objects with reactive behaviour can be built, and with which the user can interact with a combination of graphical actions and vocal commands. This prototype is used to evaluate the feasability and the usefulness of the integration of such techniques in futur applications that would be used by object designers in a real working context. We describe the current state of this system and the planned improvements.
series	other
last changed	2003/11/21 15:16

_id	ddss9809
id	ddss9809
authors	Brondino, Nair Cristina Margarido and Da Silva, Antônio Nélson Rodrigues
year	1998
title	A comparison of land valuation methods supported by GIS
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The purpose of this work was to study three different strategies for the appraisal of urban land. The first, a theoretical strategy created by the authors of this study to reproduce the common conditions of Brazilian cities, uses increments and reductions in the value of a square meter of land according to each lot’s individual features. The second method, based on Multiple Regression techniques, is widely used for valuation purposes. Finally, the effectiveness of Artificial Neural Networks to deal with thiskind of problem is studied. A sample of 157 lots was collected from several neighbourhoods of a small Brazilian city for the case study. The lot features recorded were area, width, shape, distance to the downtown district of the city through the street network, existence of fences and paved sidewalks, and market price. Prediction errors have been estimated for each of the three methods in order to compare their results. Predicted and error values, added to Geographical Information Systems, may be used to build thematic maps and to check how each strategy applies to different areas of the city. The analyses of error values conducted in this study showed that Artificial Neural Networks presented the best performance as a land appraisal method for the case studied.
series	DDSS
email
last changed	2003/11/21 15:16

_id	ddss9810
id	ddss9810
authors	Celebi, Gulser
year	1998
title	Development of a Building System
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The universal principle of architecture can be defined as follows: “The architectural product is the synthesis of the different man-made physical environments that are formed by locating the series of building components in different ways”. Within this context; it is necessary to determine the principle of building assembly and the assembly of ‘material components’ in order to produce the building. The material components are the elements of sub systems (such as; structural, envelope, services, partitions, circulation, and finishing systems) which form the building system of an architectural product. Every building is an integrated product. Integration defines the relations of sub systems with the whole. Therefore, it is necessary to define the sub systems and their relations in realizing the architectural product. This paper presents the analysis principles of the sub-systems, relationship between the analyzed systems and components, integration principles and possibilities of them, and the future conditions.
series	DDSS
last changed	2003/08/07 16:36

_id	624d
authors	Coors, V. and Wiedmann, B.
year	1998
title	Using Wearable GIS in outdoor applications
source	Proceedings of the Symposium on Interactive Applications for Mobile Computing, IMC’98, Rostock, Germany, November 1998
summary	Geographic Information Systems (GIS) are tools for acquiring, managing, analyzing, and presenting spatially related information. GIS represent parts of our world by digital maps or images. They facilitate the access to multimedial data using criteria such as geographic location or spatial proximity. Today, GIS are being used in all areas where spatial data need to be managed and analyzed. Three major application areas of GIS technology are - public administration, where GIS are used to generate and update spatially related data, - planning, where GIS support spatial decisions, e. g. in urban and regional planning, - research, where GIS help to analyze and describe spatial processes, e.g. in electoral research and environmental management.
series	other
last changed	2003/04/23 15:50

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	38af
authors	Demirkan, H.
year	1998
title	Integration of reasoning systems in architectural modeling activities
source	Automation in Construction 7 (2-3) (1998) pp. 229-236
summary	In the first phase of a design process, the designer understands the problem and assimilates it to a conceptual framework that is already known to him. Due to the nature of design problems, the reasoning methods and techniques for modeling are not uniform and clear. An integrated reasoning system is proposed for modeling the architectural processes. Such a system may help designers to make decisions based on past experiences as well as domain theory. The performance of the integration approach is compared with the pure case-based and rule-based reasoning systems to study the efficiency and effectiveness in the same domains. The study tried to identify the reasoning systems used by designers pertaining to the interior design applications.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	1d83
authors	Dodge, M., Doyle, S. and Smith, A.
year	1998
title	Visual Communication in Urban Planning and Urban Design
source	Working Paper 2; Centre for Advanced Spatial Analysis Working Papers; London; June 1998
summary	This Case Study documents the current status of visual communication in urban design and planning. Visual communication is examined through discussion of standalone and network media, specifically concentrating on visualisation on the World Wide Web (WWW). First, we examine the use of Solid and Geometric Modelling for visualising urban planning and urban design. This report documents and compares examples of the use of Virtual Reality Modelling Language (VRML) and proprietary WWW based Virtual Reality modelling software. Examples include the modelling of Bath and Glasgow using both VRML 1.0 and 2.0. The use of Virtual Worlds and their role in visualising urban form within multi-user environments is reviewed. The use of Virtual Worlds is developed into a study of the possibilities and limitations of Virtual Internet Design Arena's (ViDA's), an initiative undertaken at the Centre for Advanced Spatial Analysis, University College London. The use of Virtual Worlds and their development towards ViDA's is seen as one of the most important developments in visual communication for urban planning and urban design since the development plan. Secondly, the role of photorealistic media in the process of communicating plans is examined. The process of creating photorealistic media is documented, and examples of the Virtual Streetscape and Wired Whitehall Virtual Urban Interface System are provided. The conclusion is that, although the use of photo-realistic media on the WWW provides a way to visually communicate planning information, its use is limited. The merging of photorealistic media and solid geometric modelling in the creation of Augmented Reality is reviewed. Augmented Reality is seen to provide an important step forward in the ability quickly and easily to visualise urban planning and urban design information. Third, the role of visual communication of planning data through GIS is examined in terms of desktop, three dimensional, and Internet based GIS. The evolution to Internet GIS is seen as a critical component in the development of virtual cities that will allow urban planners and urban designers to visualise and model the complexity of the built environment in networked virtual reality. Finally, a viewpoint is put forward of the Virtual City, linking Internet GIS with photorealistic multi-user Virtual Worlds. At present there are constraints on how far virtual cities can be developed, but a view is provided on how these networked virtual worlds are developing to aid visual communication in urban planning and urban design.
series	other
last changed	2003/04/23 15:50

_id	abed
authors	Frazer, John Hamilton and Tang, Ming Xi
year	1998
title	Development of an Integrated Design System
doi	https://doi.org/10.52842/conf.caadria.1998.473
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 473-482
summary	The School of Design in the Hong Kong Polytechnic University is developing advanced computer-based design systems by integrating Artificial Intelligence and evolutionary computing techniques with CAD/CAAD systems. Applications embrace architectural and environmental design as well as interior, industrial, fashion, graphic, and photographic design. The integration of the design systems developed in these domains provides a good basis for building a virtual design studio in collaboration with leading design research centres and institutions around the world. This virtual design studio is intended as a powerful computational environment for the integration of Asian cultural values with modern interdisciplinary design technologies.
keywords	AI, Generative Techniques, Evolutionary Techniques, Virtual Studio
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:50

_id	ddss9826
id	ddss9826
authors	Hendricx, A., Geebelen, B., Geeraerts, B. and Neuckermans, H.
year	1998
title	A methodological approach to object modelling in the architectural designprocess
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The paper describes a first prototype constructed in search for a central object model. It presents all possible data, concepts and operations concerning the architectural design process in the early phases.A central model of the process of design is essential: going from one design phase into another, the model describes geometrical shapes, abstract concepts like space and activity, concrete physical building elements and the basic operations all these entities undertake. Emphasis is put on combining all these different viewpoints, thus enabling the designer to use a broad range of design strategies. The aim is to help him and not steer or even hamper his creative process. Information necessary toassist the user of the system concerning energy calculation, stability checks etc can be extracted. By means of appropriate interfaces not only those tests built on top of the system but also existing software packages can make use of the model’s object structure. The implemented object model is one of the cornerstones of the IDEA+ project, aiming to provide an Integrated Design Environment for Architecture.
keywords	object model, building model, CAAD, IDEA+, MERODE
series	DDSS
last changed	2003/08/07 16:36

For more results click below: