Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 549

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9849
id	ddss9849
authors	Sariyildiz, S. Ciftcioglu, Ö. and Veer, Peter van der
year	1998
title	Information Ordering for decision support in building design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	A systematic approach for the application of AI-based information processing for information ordering in architectural building design is described. For this purpose fuzzy associative memory (FAM) method is considered. In this system FAM is used for knowledge representation in building design concerning the functional & technical requirements information and its graded relevance to individuals concerned in the same context. A set of FAM rules having been established as a knowledge base for use, a pattern of information in the form of a fuzzy vector is fed to each FAM rule. Here, a decision support system is aimed to convey the information to the respective individuals and/or bodies involved, in a graded form, according to their capacity of involvement in the building design. By exploiting the binary logic, each FAM rule is fired in parallel but to a different degree so that each rule generates an m-dimensional output fuzzy vector Pi. The union of these vectors creates m-dimensional fuzzy decision vector D that provides the ordered information addressed to respective individuals and/or bodies mentioned. Using simulated data, a verification procedure for the performance of the approach is investigated and by means of the work, the role that artificial intelligence in architecture and building design might play, is pointed out.
series	DDSS
last changed	2003/08/07 16:36

_id	ga9801
id	ga9801
authors	Soddu, Celestino
year	1998
title	Argenia, a Natural Generative Design
source	International Conference on Generative Art
summary	Leon Battista Alberti defines the Beauty of Architecture "a concert of all the parts together, performed with proportion and logic in something in which it is possible to find again each event, in a modality that will not allow the inserting, extracting out or changing anything without decreasing its Beauty". With generative art we can approach, directly, this complex paradigm of proportions and logic, and we can directly design the Beauty, or better our idea of beauty, before the realization of each single possible artificial event. This is the heart of generative approach. The Generative Art work for the beauty, in the sense of the humanistic approach of Renaissance, because the generative code, which is the project of generative design, is the real structure of the idea. It defines how to concert all the parts and the dynamic relationship among these parts in the evolution of complexity. The generative project defines which is the law of proportion and which logic the dynamic evolution will follow. All the events that this code can generate will be, in humanistic sense, beautiful, or, if we prefer, will belong and represent our Idea of world. And more. The generative art produces events that are unique and complex. The uniqueness and complexity are strongly related one each other. As in Nature, each event is generated through an artificial life, which, as in the natural life, produces uniqueness, identity and complexity during a identifiable time. This complexity is a natural-like complexity. We can recognise, in the artificial ware we produce through this generative approach, the harmony and the beauty of the natural-like complexity that refers to the Humanistic approach of Renaissance: Man, Geometry, and Nature as references for "the harmony which is not thought as an individual caprice but as conscious reasoning." (L.B.Alberti, De re aedificatoria).
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddss9801
id	ddss9801
authors	Achten, Henri and Leeuwen, Jos van
year	1998
title	A Feature-Based Description Technique for Design Processes: A Case Study
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In order to develop appropriate tools for decision support in design processes, it is necessary to found them on an understanding of design. Analytical techniques of design processes that have a direct relationship with tool development can enhance design support systems development. The paper focuses on a design support system in the VR-DIS research program. The aim of this research program is to develop insight in the architectural design process and to establish design tools for architectsworking in Virtual Reality. The basic approach for data modelling in VR in this research is based on an extension of the Feature Based Modelling paradigm taken from design in mechanical engineering. The computer model of the design in the system is a Feature-based model. This paper describes design processes in terms of changes in the Feature-based model of the design. For this purpose, a case of a house design is used. Drawings in the conceptual design phase up to the preliminary design phase arestudied. Each state of the drawings is described in terms of a Feature-model. Particular design actions such as creation of spaces, definition of architectural elements, and changes during the design process can be expressed in terms of changes in the Feature-model. Because of the use of Features, the changes can be formalised in the VR-DIS system. The description in terms of Features offers an analytical toolthat leads to a functional brief for design support tools. The paper ends with a discussion of implications and future work.
series	DDSS
last changed	2003/11/21 15:15

_id	e78b
authors	Akin, O. and Akin, C.
year	1998
title	On the process of creativity in puzzles, inventions, and designs
source	Automation in Construction 7 (2-3) (1998) pp. 123-138
summary	The most common means of identifying creativity has been through its products. In architecture, music, writing, art, even puzzle solving and scientific discovery, the prerequisite for considering creativity has been the presence of a creative product. Alternatively, anecdotal descriptions have been used to identify processes that are considered creative. Many scientific discoveries have been linked to a sudden realization or unexplainable revelation punctuated with the AHA! response. Outside of the creative product itself and the AHA! response, the kinds of concrete evidence that point to the process of creativity are precious few. Our purpose here is to further examine these phenomena and develop hypotheses about the nature of the creative process. Our ultimate aim is to develop a general theory of creativity. We intend to base this theory on a set of conditions that are necessary for the creative process to take place in a number of domains: puzzles, scientific discoveries, and design, with special emphasis on architectural design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddss9802
id	ddss9802
authors	Akin, O., Aygen, Z., Cumming, M., Donia, M., Sen, R. and Zhang, Y.
year	1998
title	Computational Specification of Building Requirements in theEarly Stages of Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	We have been exploring computational techniques to help building designers to specify design requirements during the early stages of design. In the past, little has been accomplished in this area either in terms of innovative computational technologies or the improvement of design performance.The prospect of improving design productivity and creating a seamless process between requirements specification and formal design are our primary motivations. This research has been conducted as partof a larger project entitled SEED (Software Environment to Support Early Phases in Building Design). SEED features an open-ended modular architecture, where each module provides support for a design activity that takes place in early design stages. Each module is supported by a database to store and retrieve information, as well as a user interface to support the interaction with designers. The module described in this paper, SEED-Pro (the architectural programming module of SEED), is a workingprototype for building design requirements specification. It can be used by other modules in SEED or by design systems in other domains, such as mechanical engineering, civil engineering, industrial designand electrical engineering. Our approach to SEED-Pro is divided into two phases: core, and support functionalities. The core functionalities operate in an interactive mode relying on a case-based approach to retrieve and adapt complex specification records to the problem at hand. The supportfunctionalities include the case-base, the data-base, and the standards processing environment for building specification tasks. Our findings indicate that SEED-Pro: (1) is a tool that structures the unstructured domain of design requirements; (2) enables the integration of design requirements with the rest of the design process, (3) leads to the creation of complex case-bases and (4) enables the observation of their performance in the context of real world design problems.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0203
id	ddssar0203
authors	Alkass, Sabah and Jrade, Ahmad
year	2002
title	A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series	DDSS
last changed	2003/11/21 15:15

_id	3
authors	Andia, Alfredo
year	1998
title	Computadoras y Arquitectura en la Era Digital (Computers and Architecture in the Digital Era)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 22-31
summary	It seems that when architects think, and talk about computers, they only reflect on very narrow images of the phenomenon. Architects think that the impact of computers in their profession is only related to how PCs, CAD/CAM, networks, software, peripherals, can improve the way they work today. Architects, by enlarge, are unable to reflect beyond the screen of their computers and the wall of their offices when it comes to recognize the real consequences resulting from the new technological advances. In this paper we argue that we should think differently. We must recognize that computers are having much more profound impact on the profession. Computers - the technology of the fantastic, par excellence - are changing the city! They are fundamentally transforming the way we use space, and buildings! Computers are beginning to create new kinds of urban cultures and infrastructures. Building types such as offices, banks, retail spaces, and museums are being transformed into virtual workplaces, telecommuting centers, networks of automated teller machines, home banking, smart stores and multimedia experiences. Computers are transforming the concept of working, the concept of banking, the concept of shopping, etc. In the end, something fundamental about the architecture of these activities.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss9803
id	ddss9803
authors	Arentze, T., Borgers, A. and Timmermans, H.
year	1998
title	Extending spatial DSS with spatial choice models of multipurpose shopping trip behaviour
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Spatial choice or interaction models have been widely used in spatial DSS or customised GIS for analysing the impacts of retail location plans. The models typically used, however, do not account for spatial agglomeration effects on spatial choice behaviour. This study develops a model system for analysing the impacts of retail plans based on a choice model of multipurpose behaviour developed in earlier work. The model system is implemented in the spatial DSS called Location Planner. An empirical study demonstrates the empirical estimation and use of the model for analysing the impacts of an expansion of floor space in the major shopping centre of a middle-sized city in The Netherlands. The results indicate that agglomeration effects as predicted by the model can have substantial impacts on the performance of retail systems. Therefore, it is argued that when incorporated in a spatial DSS, the more complex models have the potential to improve the use of these systems for impact analysis.
series	DDSS
last changed	2003/11/21 15:16

_id	ascaad2006_paper19
id	ascaad2006_paper19
authors	Arjun, G. and J. Plume
year	2006
title	Collaborative Architectural Design as a reflective Conversation: an agent facilitated system to support collaborative conceptual design
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	In this paper, definitions of collaborative design are discussed and understood in terms of a designer’s cognitive collaborations to explore his/her experiential memory for remote idea associations. Based on Schon’s reflective practice theory, Valkenburg and Dorst’s (1998) description of collaborative team designing is adopted as a model for a proposed design conversation system. The design conversation system is aimed at triggering the experiential memory of the designer by associating significant ideas from different design domains to provide different perspectives of a design situation. The paper describes a proposed framework for the design conversation system incorporating computational agents in a blackboard architecture environment.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	4894
authors	Asanowicz, Aleksander
year	1998
title	Approach to Computer Implementation in Architectural Curriculum
source	Computerised Craftsmanship [eCAADe Conference Proceedings] Paris (France) 24-26 September 1998, pp. 4-8
doi	https://doi.org/10.52842/conf.ecaade.1998.004
summary	This paper examines traditional teaching methods in architecture and identifies opportunities which are offered by computers for changing the teaching process. Introduction of CAAD to the teaching schedules unquestionably and explicity uncovered a need of changes within the whole schedule of study. In this paper we will submit the thesis that the problem does not lay in how will CAAD be incorporated into the architectural curriculum, because it is the CAAD that has the potential to become an integrating factor of architectural curriculum.
series	eCAADe
email
more	http://www.paris-valdemarne.archi.fr/archive/ecaade98/html/22asanowicz/index.htm
last changed	2022/06/07 07:54

_id	ddss9804
id	ddss9804
authors	Assaf, S.
year	1998
title	A Decision Support System (DSS) for Forward Housing Planning
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper presents a specification of a Local Housing Strategy Decision Support System (LHS-DSS) (Conceptual and Physical model design). Emphasis throughout the design process is laid on the techniques that provide housing planners with accurate rapid assistance during the preparation process of local housing strategy. Relevant knowledge (descriptive, procedural, reasoning) and data about each step of the process, options for each situation as it arises, and a record of decisions made with underlying reasons are provided to system users. Three main components are identified to shape up the LHS-DSS: the language system for addressing housing problems; knowledge system which is responsible for gathering and accumulating the housing knowledge required; and problem processing system (an inquiry system) which produces suitable and effective recommendations to support the strategy preparation process.
series	DDSS
last changed	2003/11/21 15:16

_id	a037
authors	Aygen, Z. and Flemming, U.
year	1998
title	Classification of Precedents - A Hybrid Approach to Indexing and Retrieving Design Cases in SEED (a Software Environment for the Early Phases of Building Design)
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 435-444
doi	https://doi.org/10.52842/conf.caadria.1998.435
summary	An efficient indexing of past solutions is crucial to case-based design (CBD) systems performing complex retrieval on large case-bases. This paper suggests a hybrid approach to the indexing and retrieval of design precedents. The suggested approach accounts for the issues of classification manifested in architectural discussions on type and CBD literature. The indexing scheme integrates description-logic based representation for classification and an object-based representation for precedents. The hybrid scheme constitutes a basis for the implementation of a generic case indexing and retrieval mechanism for SEED.
keywords	Case-Based Design, Classification, Typology
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:54

_id	ddss9811
id	ddss9811
authors	Barbanente, A., Conte, E. and Monno, V.
year	1998
title	Changing trends and approaches in human and computer modelling for social housing policies
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The paper discusses conceptual issues, goals and preliminary results of an on-going research which aims at building a Decision Support System for public housing environmental oriented maintenance and management in a city in Southern Italy, Bari. Traditional post-war Italian housing policies are compared with more recent approaches in the field, pointing out the change from quantitative, aggregated, more simple building problems and relatedapproaches to qualitative, differentiated, complex ones integrating social, economic and environmental dimensions with the aim of regenerating deteriorated residential areas. The paper claims for the need shift, both in the human and computer areas, from traditional quantitative models to new approaches able to manage also qualitative variables, temporal dynamics, emergencies, and intentionality, since they appear key aspects of the real world to be modelled. The housing estate of Bari and its needs of maintenance and management are examined, eliciting essential related knowledge using the interview technique. The clear orientation towards sustainable policies for urban regeneration, at a local, national, and Community level, is also considered. The innovative and collaborative nature of such policies and the attention to be paid to the social aspects ofthe problem require a complex DSS, integrating various kind of hypertexts, information systems and case-based fuzzy expert systems, whose main aims, functions, software and general organisation are outlined in the paper.
series	DDSS
last changed	2003/11/21 15:16

_id	c304
authors	Barber, T.and Hanna, R.
year	1998
title	Appraisal of Design Studio Methodologies
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 21-30
doi	https://doi.org/10.52842/conf.caadria.1998.021
summary	This paper investigates the relationship between different design approaches and their effectiveness in the formulation of design concepts. This inquiry will focus on the computer as the sole design and developmental tool. The research employs a short design programme, a small building with a given urban site, as its investigative vehicle. Nineteen second year students of the Mackintosh School of Architecture were monitored and their design progress evaluated. They were split into two groups: one used CAD and AEC as the only drawing and modelling tool, tutorial and review, and another used conventional tools of drawing and model making (mixed media). Structured interviews and personal observations were used as a means for data collection. Questionnaires were administered to students and their response was analysed using the statistical programme SPSS (Statistical Package for the Social Sciences). The Mann-Whitney test was used to test the Null Hypothesis that different design approaches will not produce different design outcomes. Correlation, Regression and the X2 test of independence were also employed to screen data and identify patterns of relationships.
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:54

_id	56
authors	Barron, Alicia and Chiarelli, Julia
year	1998
title	Proyecto Para la Red de un Estudio de Arquitectura (Project for the Network of a Studio of Architecture)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 418-425
summary	A consequence of the globalization on information processes in the way in which new technologies influence on design and production processes. There is no doubt that there is an increasingly and a big change in the areas of architecture design concerning to the operational and working methodology on graphic and alphanumeric information. Now a day it is not a far away Utopia, but a soon to come reality that architects interact in a virtual manner with their individual or institutional clients in their own country, as well as in foreign countries. Keeping these considerations in mind, we elaborated this Paper in order to present one of the existing criteria for the organization of graphic information jointly with its spatial relationship. The work presented herewith shows the development of an informatic net for an ideal mega-studio which in its professional and entrepreneurial profile covers tasks such as design, construction, graphic design and representation of foreign concerns. In the net design and in the selection of equipment for computing design area are covered all the variables at every instance.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	21
authors	Barroso, Jorge
year	1998
title	Reflexiones Sobre la EnseÒanza de la Arquitectura, la Informatica e Internet (Reflections on the Teaching of the Architecture, Computing and the Internet)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 174-179
summary	This paper proposes a reflection upon the teaching of architecture as seen from the actual practice of the profession within the context of the changes caused by the widespread use of computers and Internet in recent years. This proposal designates the present time as "semic revolution", superseding denominations like post industrial" or information revolution", emphasizing that the "mental prosthesis" created by man represents the highest degree of exploitation of his innerness as a "semic subject". A brief epistemological framework serves to lay the foundation for the concepts of imagination, creation, and design, differentiating the creator by his characteristic of requiring or not, semic mediation in order to reach his goals. The dominant use of new instruments which serve to represent and operate the "primary virtual object" giving priority to the comprehension and function of the new tool over the acquisition of information and ability to use it, is proposed when carried over to the field of application. The integration of internal networks through email strives not only to facilitate document transmission, exercises, group work, etc. but to understand the new dimension in the intellectual activities of man.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	7436
authors	Barría Chateau, H., Muñoz Viveros, C. and Cerda Brintrup, G.
year	1999
title	Virtual Tour Through Modern Architecture in Conception
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 475-477
summary	This paper describes the development of a project that was selected and sponsoured by the Regional Competition FONDART 1998 (Funds for the Development of Arts of the Regional Secretary of Education) that follows the aim of cultural diffusion. Towards the middle of the 30s, the city of Concepción developed an architecture distinctly colonial, neoclassical and eclectic. An earthquake in 1939 abruptly interrupted this scene, destroying the enterity of its most important buildings. The reconstruction of the city followed the manifestoes of Modern Architecture, consolidating the urban importance of buildings such us the Law Courts, the Railway Station and the Regional Government, that emerged as the new architectural and cultural heritage of the city. The project consisted on the modeling of eleven buildings of the modern architectural heritage, and on the generation of 42 virtual tours through the buildings that were finally edited on a 16' video. This video allows the spectator to make a virtual tour through the original modern heritage of the city, nowadays demolished, altered, and sometimes, even forgotten. This project pretends to widen the ways of comprehension of our cultural identity by using computer modelling and animation as a tool for the conservation of the architectural heritage; and creating a record that can be used as a reference and as an instrument of cultural difussion.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	b335
authors	Bayle, E., Bellamy, R., Casaday, G., Erickson, T., Fincher, S., Grinter, B., Gross, B., Lehder, D., Marmolin, H., Moore, B., Potts, C., Skousen, G. and Thomas, T.
year	1998
title	Putting It All Together: Towards a Pattern Language for Interaction Design Reports
source	ACM SIGCHI Bulletin 1998 v.30 n.1 pp.17-23
summary	Pattern languages are representations that have been used in architecture and urban design for about twenty years. They focus on the interaction between physical form and social behavior, and express design solutions in an understandable and generalizable form. But pattern languages are not simply set of patterns intended to be universally applied; instead, they are actually meta-languages which, when used in a particular situations, generate situated design languages. This report describes a CHI 97 workshop which explored the utility of pattern languages for interaction design. We discuss the workshop's rationale, the structure and process of the workshop, and some of the workshop's results. In particular, we describe some patterns developed as part of the workshop, and our consequent reflections on the use of patterns and pattern languages as lingua franca for interaction design. This report concludes with a bibliography on pattern languages and related matters that spans architecture, software design, and organizational design.
series	other
last changed	2002/07/07 16:01

_id	7
authors	Bermudez, Julio
year	1998
title	Interaccion de Medios y Proceso De DiseÒo: Teoria y Base de Conocimientos Para una Produccion Arquitectonica Hibrida (Interaction of Design Media and Process: Theory and Knowledge Base for in the Production of Architectural Hybrids)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 56-65
summary	Integrating computers in architectural design means to negotiate between centuries-old analog design methods and the new digital systems of production. The difficulty lies in the underdeveloped state of the necessary methods, techniques, and theories to relate traditional and new media. Recent investigations on the use of multiple iterations between manual and electronic systems to advance architectural work show promising results. However, these experiments have not yet either developed a theoretical base that connects their procedures to a larger conceptual framework nor been sufficiently cross-referenced and third party tested to conform a reliable knowledge base. This paper addresses the first shortcoming in the light of the forces transforming our contemporary civilization and architecture.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss9806
id	ddss9806
authors	Besio, M., Frixione, M. and Pedemonte, O.
year	1998
title	GIS technologies in the transfer of theknowledge project to the plan projectmultiple representation of the environmental spaces
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	An analysis is made of the relation between the conceptualand paradigmatic level of GIS technologies and the new forms of plan, whichmake environment the center of attention. The intention is to study newcriteria for zoning able to give contextual representations of theterritorial, environmental and landscape aspects of the geographical space,and also to study new legislative principles, able to establish integratedrules for theprojecting of soil uses, the safeguarding and recovery ofenvironmental systems and the tutelage and boosting of the landscape. The experimentation of GIS (Geographical Information System)technologies aims at the construction of systems helping to make decisionsfor the control of the environmental and landscape aspects of theterritory. An analysis is made of the ways in which there are formulated thedescriptions of the various aspects of the environment: the conceptsthrough which knowledge is expressed, the languages used forrepresentations, the cognitive models adopted. GIS technologies have made it possible to represent in an explicitmanner the paradigms underlying the various models of knowledge.Specifically, the following cognitive models have been developed:- ecological models of nature- ecological models of human settlement- ecological models of inhabitants’ mental perceptions
series	DDSS
last changed	2003/11/21 15:16

For more results click below: