Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	029f
authors	Bermudez, Julio and King, Kevin
year	1998
title	Media Interaction & Design Process: Establishing a Knowledge Base
doi	https://doi.org/10.52842/conf.acadia.1998.006
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 6-25
summary	Integrating computers in architectural design means to negotiate between centuries-old analog design methods and the new digital systems of production. Analog systems of architectural production use tracing paper, vellum, graphite and ink, clipboard, clay, balsa wood, plastic, metal, etc. Analog systems have also been termed ‘handmade’, ‘manual’, ‘material’ or ‘physical’. Digital systems of architectural production use scanning, image manipulation, visualization, solid modeling, computer aided drafting, animation, rendering, etc. Digital systems have also been called ‘electronic’, ‘computer-aided’, ‘virtual’, etc. The difficulty lies in the underdeveloped state of the necessary methods, techniques, and theories to relate traditional and new media. Recent investigations on the use of multiple iterations between manual and electronic systems to advance architectural work show promising results. However, these experiments have not been sufficiently codified, cross-referenced and third party tested to conform a reliable knowledge base. This paper addresses this shortcoming by bringing together reported experiences from diverse researchers over the past decade. This summary is informed by more than three years of continuous investigation in the impacts of analog-digital conversations in the design process. The goal is to establish a state-of-the-art common foundation that permits instructors, researchers and practitioners to refer to, utilize, test, criticize and develop. An appendix is included providing support for the paper’s arguments.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	487c
authors	Blazquez, Oscar and Hardin, Mary
year	1998
title	Balancing Computer Use and Design Content in Studio Projects
doi	https://doi.org/10.52842/conf.acadia.1998.036
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 36-43
summary	Particular design approaches must be taught in order to take advantage of the strengths of computers in design rather than attempting to make computers conform to methods developed as by-products of manual design techniques. For the last three years our team of faculty teaching the second year design studio has been trying different approaches to the use of computers in design, in order to find the advantages and opportunities especially suited to electronic media. There are several projects during the semester which use computers at different stages of the design process. One of these projects, called “A Spatial Sequence,” uses information from a previous project as well as the knowledge from the computer class in parallel to design studio. The project asked students to create spatial archetypes based on the work of well-known architects. They explore the following topics as represented in the work of one particular architect: relationships of major spaces/minor spaces, approach/entry, and transition/threshold. Following the analysis, they create digital models to explore the spaces formed by their archetypes. Before committing to a physical study model, they look at the transitions between spaces by creating a sequence using the digital model and producing a series of shots through the digital model to show the flow of spaces. The use of computer through the process accelerates the options available to explore a sequence of elements, while simultaneously giving them a window to look into the spaces they have created. This hybridized approach of precedent analysis, digital modeling, and physical modeling was uniquely suited to the studio problem.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	fb22
authors	Chien, Sheng-Fen
year	1998
title	Supporting information navigation in generative design systems
source	Camegie Mellon University, School of Architecture
summary	Generative design systems make it easier for designers to generate and explore design altematives, but the amount of information generated during a design session can become very large. Intelligent navigation aids are needed to enable designers to access the information with ease. Such aids may improve the usability of generative design systems and encourage their use in architectural practice. This dissertation presents a comprehensive approach to support navigation in generative design systems. This approach takes account of studies related to human spatial cognition, wayfinding in physical environments, and information navigation in electronic media. It contains a general model of design space, basic navigation operations, and principles for designing navigation support. The design space model describes how the space may grow and evolve along predictable dimensions. The basic operations facilitate navigation activities in this multi-dimensional design space. The design principles aim at guiding system developers in creating navigation utilities tailored to the needs of individual design systems. This approach is validated through prototype implementations and limited pilot usability studies. The validity of the design space model and basic navigation operations is examined through the development of a design space navigation framework that encapsulates the model and operations in a software environment and provides the infrastructure and mechanisms for supporting navigation. Three prototype navigation tools are implemented using this framework. These tools are subjected to usability studies. The studies show that these tools are easy to leam and are efficient in assisting designers locating desired information. In summary, it can be demonstrated that through the prototype implementations and usability studies, this approach offers sufficient support for the design and implementation of navigation aids in a generative design system. The research effort is a pioneer study on navigation support in generative design systems. It demonstrates why navigation support is necessary; how to provide the support; and what types of user interaction it can offer. This research contributes to information navigation studies not only in the specific domain of generative design system research, but also in the general field of human-computer interaction.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	9188
authors	Christiansson, P.
year	1998
title	Knowledge Nodes
source	I. Smith (ed) Artificial Intelligence in Structural Engineering, Springer, Berlin, pp. 197-213
summary	Today most of the information we produce is stored digitally. We are slowly forced to leave behind us thinking about information as something stored in physical containers as books, drawings etc. We make it possible to dynamically create logical containers of information on the fly. The paper focuses on how we in the future can aggregate, classify and generalize digitally stored information in order to make it more accessible and how we can define underlying knowledge container models to support knowledge discovery and collaboration. Examples are picked from ongoing research and the outcomes are generally valid and in particular for the structural engineering field.
series	other
last changed	2003/04/23 15:50

_id	0c54
authors	Datta, Sambit and Woodbury, Robert F.
year	1998
title	Reducing Semantic Distance in Generative Systems: A Massing Example
doi	https://doi.org/10.52842/conf.acadia.1998.164
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 164-171
summary	Generative design formalisms utilise discrete, constructive steps to encode strategies for formal change. In physical design media, the pervasive metaphor for doing design is the direct and continuous manipulation of the developing form. The goal of our investigation is to develop mixed initiative approaches to design exploration. In this paper, we address how constrained manipulation in generative systems can support both discrete and continuous modes of interaction. Massing is a common strategy for processing conceptual notions about three dimensional form. We use massing models of tenth century temple cellas as an example to illustrate an environment for constrained manipulation.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	e72f
authors	Dorta, Tomás and LaLande, Philippe
year	1998
title	The Impact of Virtual Reality on the Design Process
doi	https://doi.org/10.52842/conf.acadia.1998.138
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 138-163
summary	Sketching, either hand or computer generated, along with other traditional visualization tools such as perspective drawing have difficulty in correctly representing three dimensional objects. Even physical models, in architecture, suffer in this regard because of inevitable scaling. The designer finds himself cut off from the reality of the object and is prone to misinterpretations of the object and its surrounding space and to resulting design errors. These are sometimes not perceived until too late, once the object has been constructed. Traditional tools use 2D media to represent 3D objects and only manage to introduce the third dimension in a limited manner (perspectives, not only tedious to construct, are static). This scenario affects the design process, particularly the cycle of proposal, verification and correction of design hypotheses as well as the cognitive aspects that condition the designer’s visualization of the designed object. In most cases, computer graphics mimic, through its interface, the traditional way of doing things. The architectural model is parametricized with little regard for visualization. No allowance is made for the change in the medium of graphic representation. Moreover, effort is not made to capitalize on the advantages of numerical calculation to propose new interfaces and new dimensions in object visualization. Virtual Reality (VR), seen not only as technology but as experience, brings the 3D object, abstractly viewed by traditional means, into clearer focus and provides us with these new dimensions. Errors due to abstracted representation are reduced since the interface is always three dimensional and the interactions intuitively made in real time thus allowing the designer to experience the presence of the designed object very quickly. At the École de design industriel of the Faculté d’aménagement, we have run tests using non-immersive VR–one passive (comprehension) and another active (design). This project, involving a group of 72 students during a period of six weeks (6h/week), aimed at analyzing the impact of VR as a visualization tool on the design process versus traditional tools. The results, described in this presentation, shed light on the effect of VR on the creative process as such, as well as on the quality of the results produced by that process.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	2d33
authors	Gabryszewski, A.B.
year	1998
title	Conception of Computer-Aided Study of Determinants
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 85-92
summary	Computer catalogues, files, digital maps and data bases are more and more widely used in planning studies not only in the world, but in Poland as well. They successfully replace manual and time- consuming elaboration of cartographic materials or uphill collecting of data, among others. The developing computerisation in architectural offices, physical planning or other area management centers will assure a studies results' transfer in the form of digital maps or computer data bases in the near future Computer technology forces changes of work technics and generates in the next step the demand for mathematical models used for examining of eco-social-economic systems functioning. The speed of data processing influences on the profitability of common usage of the source data available on magnetic recording media. Thus data processing and data aggregation according to the designers' needs are more simply and generating of new information essential for creating of updated constructive solutions is possible too. Sharply increasing information resources (like Internet) require the adoption of such techniques and models, which make easier to control still increasing number of over-complicated- structure data bases.
series	plCAD
last changed	1999/04/08 17:16

_id	dd16
authors	Gibson, Kathleen
year	1999
title	STUDIO @ CORNELL
doi	https://doi.org/10.52842/conf.acadia.1999.018.2
source	ACADIA Quarterly, vol. 18, no. 2, pp. 18-21
summary	Unique to the interior design program at Cornell University is a planned pedagogical approach requiring equal emphasis toward manual and digital graphic communication at the freshman level. Prior to 1998, computer-based instruction only occurred at the junior year of study. Recognizing that cultural and symbolic biases against digital media were formally being instituted by curriculum policy, faculty searched for a new perspective. Central to success was the removal of illogically placed boundaries, both mental and physical. In response, students are now encouraged to cultivate a fluid dexterity between traditional and digital methods, at times using various skills concurrently for design analysis and representation (Figures 1, 2, 3, 4, 5, 6, 7). Course content for DEA115 ranges from basic orthographic drafting, paraline projection, and perspective drawing to color rendering and composition. Students utilize a full range of media: pencil, ink, marker, pastel, AutoCAD, 3DS/ MAX, and Photoshop in this graphics studio. Course meetings total six contact hours per week, constituting a three credit hour class. Assignments are purposefully created to shatter digital myths. For example, instead of a standard, rote drafting exercise, AutoCAD is used to explore design ideas through systemic object manipulation (Figures 8, 9).
series	ACADIA
last changed	2022/06/07 07:51

_id	48db
authors	Proctor, George
year	2001
title	CADD Curriculum - The Issue of Visual Acuity
doi	https://doi.org/10.52842/conf.ecaade.2001.192
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 192-200
summary	Design educators attempt to train the eyes and minds of students to see and comprehend the world around them with the intention of preparing those students to become good designers, critical thinkers and ultimately responsible architects. Over the last eight years we have been developing the digital media curriculum of our architecture program with these fundamental values. We have built digital media use and instruction on the foundation of our program which has historically been based in physical model making. Digital modeling has gradually replaced the capacity of physical models as an analytical and thinking tool, and as a communication and presentation device. The first year of our program provides a foundation and introduction to 2d and 3d design and composition, the second year explores larger buildings and history, the third year explores building systems and structure through design studies of public buildings, fourth year explores urbanism, theory and technology through topic studios and, during the fifth year students complete a capstone project. Digital media and CADD have and are being synchronized with the existing NAAB accredited regimen while also allowing for alternative career options for students. Given our location in the Los Angeles region, many students with a strong background in digital media have gone on to jobs in video game design and the movie industry. Clearly there is much a student of architecture must learn to attain a level of professional competency. A capacity to think visually is one of those skills and is arguably a skill that distinguishes members of the visual arts (including Architecture) from other disciplines. From a web search of information posted by the American Academy of Opthamology, Visual Acuity is defined as an ability to discriminate fine details when looking at something and is often measured with the Snellen Eye Chart (the 20/20 eye test). In the context of this paper visual acuity refers to a subject’s capacity to discriminate useful abstractions in a visual field for the purposes of Visual Thinking- problem solving through seeing (Arnheim, 1969, Laseau 1980, Hoffman 1998). The growing use of digital media and the expanding ability to assemble design ideas and images through point-and-click methods makes the cultivation and development of visual skills all the more important to today’s crop of young architects. The advent of digital media also brings into question the traditional, static 2d methods used to build visual skills in a design education instead of promoting active 3d methods for teaching, learning and developing visual skills. Interactive digital movies provide an excellent platform for promoting visual acuity, and correlating the innate mechanisms of visual perception with the abstractions and notational systems used in professional discourse. In the context of this paper, pedagogy for building visual acuity is being considered with regard to perception of the real world, for example the visual survey of an environment, a site or a street scene and how that visual survey works in conjunction with practice.
keywords	Curriculum, Seeing, Abstracting, Notation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	9
authors	Stipech, Alfredo
year	1998
title	Un Nuevo Horizonte Arquitectonico, Productivo e Intelectual (A New Architectural, Productive and Intelectual Horizon)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 76-83
summary	This work presents the pedagogical experience of a Design Workshop that investigated the impact of the digital and analogic means on the architectonic design process This work was based on the research of Dr. Arch. Julio BermÝdez who also directed this workshop in 1997. This class was part of the Training Program organized by the "Centro de Informatica y Diseho" (CID) at the "Universidad Nacional del Litoral" FADU (Facultad de Arquitectura Diseho y Urbanismo) Santa Fe, Argentina and made possible by the ongoing International Program of Academic Exchange between the FADU and the (University of Utah Graduate School of Architecture (IPAE Project NO 4). The experimental studio utilized an architectural problem to study the procedural, technical, interpretative and theoretical issues associated with the relationship of contemporary media and design process. The pedagogical vehicle was a program that expresses in itself the meeting or collision between two cultures competing for dominance at the end of the millennium: the immemorial material culture (corporeal, tectonic) and the new and everyday more influent virtual culture (information, nets, media, simulation). The premise for the design process, communication and criticism was the constant migration between the digital and analog representation systems. Within this theoretical-practical context semantic aspects containing different representation modalities were used such as physical and electronic models along with systematic and sensitive drawings (manuals, pixels and with CAD). Hybrid interfaces took a leading role in the process since they allowed the communication between analog and digital media through the creative and technical interaction between scanner, video and computer. This architectural and media context generated an intense pedagogic environment fostering the development of creativity and a critical attitude while allowing concrete breakthroughs in the teaching process and format design. Our work reflects on these results showing examples of stud-go works and providing a final evaluation of this unique experience in Argentina.
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	6a78
authors	Chastain, Thomas and Elliott, Ame
year	1998
title	Cultivating Design Competence: Online Support for the Beginning Design Studio
doi	https://doi.org/10.52842/conf.acadia.1998.290
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 290-299
summary	A primary lesson of a beginning design studio is the development of a fundamental design competence. This entails acquiring skills of integration, projection, exploration, as well as critical thinking–forming the basis of thinking “like a designer.” Plaguing the beginning architectural design student as she develops this competence are three typical problems: a lagging visual intelligence, a linking of originality with creativity, and the belief that design is an act of an individual author instead of a collaborative activity. We believe that computation support for design learning has particular attributes for helping students overcome these problems. These attributes include its inherent qualities for visualization, for explicitness, and for sharing. This paper describes five interactive multi-media exercises exploiting these attributes which were developed to support a beginning design studio. The paper also reports how they have been integrated into the course curriculum.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	0f4c
authors	Asanowicz, Aleksander
year	1998
title	From Real to Cyber Reality
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 11-19
summary	Human activity takes place in two planes, at two levels. Practical activity is present in one of the planes, the other level is occupied by purely cognitive activity. When observing sufficiently long sequences of practical and cognitive activities, one notices transitions between them, which prove true the suspicions of their functional relationship. Because on both of these planes of human activity there is always one and the same element present - an informative element - which on the first plane functions as subordinate, and in the other as an independent one, one can search for a common characteristic for both planes. Such common characteristic for both levels of human activity can be perceived in the fact that in both situations the activity of a human is based on CREATION. Human thinking is based on transitions between what is accessible through experience and what is referred to conceptually. The human thought exists only and exclusively in the vertical motion: from the phenomenal level to the structural level direction of abstraction) and from the conceptual level to the empirical level direction of concretisation). All human activity is multilayered or, more precisely, it is an activity within many layers: the sensual one as well as the structural one. The appearance of conceptual thinking has created a qualitatively new type of a situation. This novelty can be easily seen both in the sphere of the practical cognitive activity as well as in the sphere of the pure cognitive activity. In both cases, the cognitive activity of a human is of a "double-decker" character: image and concept. It is necessary to note here that the "image" does not only mean structural, concrete, but also one which is purely visual, abstract, of no physical form. Therefore, the human experience, being the result of the cognitive activity, is being expressed, becoming objective, materialising in two different but compatible ways. Firstly, in the material structures of practical significance - this way the material culture is created. Secondly - in material structures which have no practical meaning but are solely used for expressing the spiritual contents - thus creating the spiritual culture. Humans have developed an extraordinarily strong need for spiritual activity, which is manifested by the material activity, redundant from the point of view of the material needs.
series	plCAD
email
last changed	2003/05/17 10:01

_id	ddss9804
id	ddss9804
authors	Assaf, S.
year	1998
title	A Decision Support System (DSS) for Forward Housing Planning
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper presents a specification of a Local Housing Strategy Decision Support System (LHS-DSS) (Conceptual and Physical model design). Emphasis throughout the design process is laid on the techniques that provide housing planners with accurate rapid assistance during the preparation process of local housing strategy. Relevant knowledge (descriptive, procedural, reasoning) and data about each step of the process, options for each situation as it arises, and a record of decisions made with underlying reasons are provided to system users. Three main components are identified to shape up the LHS-DSS: the language system for addressing housing problems; knowledge system which is responsible for gathering and accumulating the housing knowledge required; and problem processing system (an inquiry system) which produces suitable and effective recommendations to support the strategy preparation process.
series	DDSS
last changed	2003/11/21 15:16

_id	b335
authors	Bayle, E., Bellamy, R., Casaday, G., Erickson, T., Fincher, S., Grinter, B., Gross, B., Lehder, D., Marmolin, H., Moore, B., Potts, C., Skousen, G. and Thomas, T.
year	1998
title	Putting It All Together: Towards a Pattern Language for Interaction Design Reports
source	ACM SIGCHI Bulletin 1998 v.30 n.1 pp.17-23
summary	Pattern languages are representations that have been used in architecture and urban design for about twenty years. They focus on the interaction between physical form and social behavior, and express design solutions in an understandable and generalizable form. But pattern languages are not simply set of patterns intended to be universally applied; instead, they are actually meta-languages which, when used in a particular situations, generate situated design languages. This report describes a CHI 97 workshop which explored the utility of pattern languages for interaction design. We discuss the workshop's rationale, the structure and process of the workshop, and some of the workshop's results. In particular, we describe some patterns developed as part of the workshop, and our consequent reflections on the use of patterns and pattern languages as lingua franca for interaction design. This report concludes with a bibliography on pattern languages and related matters that spans architecture, software design, and organizational design.
series	other
last changed	2002/07/07 16:01

_id	07c5
authors	Burry, Mark
year	1998
title	Handcraft and Machine Metaphysics
doi	https://doi.org/10.52842/conf.ecaade.1998.041
source	Computers in Design Studio Teaching [EAAE/eCAADe International Workshop Proceedings / ISBN 09523687-7-3] Leuven (Belgium) 13-14 November 1998, pp. 41-50
summary	As the cost of 3D digitisers drops and PC price performance rises, opportunities for hand - computer co-operation improve. Architectural form may now be experimentally moulded or carved using manual techniques in close association with the computer. At any stage the model can be mechanically digitised and translated to a computer database for explorations that go beyond simple physical manipulation. In the virtual environment, the resulting forms can be rationalised using an ordering geometry or further de-rationalised. This potential for debasing intuitive, sensually haptic and responsive handwork through its translation into numerically cogent formulations is risky business. But it may also bring new and unlikely rewards. This paper considers the implications and aesthetics of negotiations between handcraft and consecutive or synchronous computer digitalisation of intentions. Two situations will be discussed and compared. The first is the nature of computer modelling and its representation per se, and the second is the relevance of using handcraft as a sponsor for computer-based manipulation and morphological experimenting.
series	eCAADe
email
more	http://www.eaae.be/
last changed	2022/06/07 07:54

_id	3542
authors	Cha, M.Y. and Gero, J.S.
year	1998
title	Shape pattern recognition using a computable shape pattern representation
source	J.S. Gero and F. Sudweeks (eds), Artificial Intelligence in Design '98, Kluwer, Dordrecht, pp. 169-188
summary	Properties of shapes and shape patterns are investigated in order to represent shape pattern knowledge for supporting shape pattern recognition. It is based on the notion that shape patterns are classified in terms of similarity of spatial relationships as well as physical properties. Methods for shape pattern recognition are explained and examples from an implementation are presented.
keywords	Shape Patterns, Shape Representation
series	other
email
last changed	2003/04/06 08:57

For more results click below: