Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 11 of 11

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2004_d-49
id	ddss2004_d-49
authors	Polidori, M. and R. Krafta
year	2004
title	Environment – Urban Interface within Urban Growth
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 49-62
summary	This work presents the synthesis of a model of urban growth dedicated to accomplish simulations of urban spatial dynamics, based on integrated urban and environmental factors and promoting simultaneity among external and internal growth. The city and surrounding environment are captured and modeled in computational ambient, by application of the centrality / potential model (Krafta, 1994 and 1999), with support of graph theory, cellular automata, GIS and geocomputation. The model assumes the city as a field of opportunities for obtaining income, mediated by the space, which is composed of urban and environmental attributes, that work as attractors or as resistances for the urban growth. The space configuration and the distribution of those attributes generate tensions that differentiate qualitatively and quantitatively the space, through the centrality measure (built with the support of graphs techniques), coming to provoke growth in places with larger potential of development (built with the help of techniques of CA – cellular automata). Growths above environmental thresholds are considered problems, generated and overcome in the same process of production of the urban space. Iterations of that process offer a dynamic behaviour to the model, allowing to observe the growth process along the time. The model presents several possibilities: a) urban - natural environment integration; b) internal and external growth integration; c) variety in the scale; d) GIS integration and geocomputation; e) user interface; f) calibration; g) theoretical possibilities; and h) practical possibilities.
keywords	Environment, Urban Growth, Urban Morphology, Simulation
series	DDSS
last changed	2004/07/03 22:13

_id	9cd2
authors	Rodríguez, A., Barcia, J. and Diron, F.
year	1999
title	Desarrollo de la Web del Departamento de Histología y Embriología (Development of the Web Site of the Department of Histology and Embriologiy)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 376-378
summary	The computers changed in dramatic form the way in which the information spreads. The low cost of the personal computers, along with the development of Internet allows that the educative community is interconnected, with limitless access to the information what increases the administrative productivity , and modifying the process of education-learning in one interactive colaborative and, focused in the student. In our Department we have a Web site in construction that includes the following pages: a main one, with the presentation of the Department and links to: a) historical aspects of the discipline and biography of outstanding Professors; b)visitors Professors ; c) investigation; d) publications; e) colaborative and independent projects; f) courses and examinations; g) AIH; h) autoevaluation for students; i) email addresses; j) project: study of embryo malformations.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	e679
authors	Seichter, H., Donath, D. and Petzold, F.
year	2002
title	TAP – The Architectural Playground - C++ framework for scalable distributed collaborative architectural virtual environments
doi	https://doi.org/10.52842/conf.ecaade.2002.422
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 422-426
summary	Architecture is built information (Schmitt, 1999). Architects have the task of restructuring and translating information into buildable designs. The beginning of the design process where the briefing is transformed into an idea is a crucial phase in the design process. It is where the architect makes decisions which influence the rest of the design development process (Vries et al., 1998). It is at this stage where most information is unstructured but has to be integrated into a broad context. This is where TAP is positioned – to support the architect in finding solutions through the creation of spatially structured information sets without impairing thereby the creative development. We want to enrich the inspiration of an architect with a new kind of information design. A further aspect is workflow in a distributed process where the architect’s work becomes one aspect of a decentralised working patterns. The software supports collaborative work with models, sketches and text messages within an uniform surface. The representations of the various media are connected and combined with each other and the user is free to combine them according to his or her needs.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	d5c8
authors	Angelo, C.V., Bueno, A.P., Ludvig, C., Reis, A.F. and Trezub, D.
year	1999
title	Image and Shape: Two Distinct Approaches
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 410-415
summary	This paper is the result of two researches done at the district of Campeche, Florianópolis, by the Grupo PET/ARQ/UFSC/CAPES. Different aspects and conceptual approaches were used to study the spatial attributes of this district located in the Southern part of Santa Catarina Island. The readings and analysis of two researches were based on graphic pistures builded with the use of Corel 7.0 e AutoCadR14. The first research – "Urban Development in the Island of Santa Catarina: Public Space Study"- examined the urban structures of Campeche based on the Spatial Syntax Theory developed by Hillier and Hanson (1984) that relates form and social appropriation of public spaces. The second research – "Topoceptive Characterisation of Campeche: The Image of a Locality in Expansion in the Island of Santa Catarina" -, based on the methodology developed by Kohlsdorf (1996) and also on the visual analysis proposed by Lynch (1960), identified characteristics of this locality with the specific goal of selecting attributes that contributed to the ideas of the place its population held. The paper consists of an initial exercise of linking these two methods in order to test the complementarity of their analytical tools. Exemplifying the analytical procedures undertaken in the two approaches, the readings done - global (of the locality as a whole) and partial (from parts of the settlement) - are presented and compared.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	84e8
authors	Cohen, J.M., Markosian, L., Zeleznik, R.C., Hughes, J.F. and Barzel, R.
year	1999
title	An Interface for Sketching 3D Curves
source	ACM Symposium on Interactive 3D Graphics, pp. 17-22 (April 1999). ACM SIGGRAPH. Edited by Jessica Hodgins and James D. Foley
summary	The ability to specify nonplanar 3D curves is of fundamental importance in 3D modeling and animation systems. Effective techniques for specifying such curves using 2D input devices are desirable, but existing methods typically require the user to edit the curve from several viewpoints. We present a novel method for specifying 3D curves with 2D input from a single viewpoint. The user rst draws the curve as it appears from the current viewpoint, and then draws its shadow on the oor plane. The system correlates the curve with its shadow to compute the curve's 3D shape. This method is more natural than existing methods in that it leverages skills that many artists and designers have developed from work with pencil and paper.
series	other
last changed	2003/04/23 15:14

_id	6cc5
authors	Kowaltowski, D.C.C.K., Da Silva, V.G., Gouveia, A.P.S., Pina. G., Ruschel, R.C., Filho, F.B. and Fávero, E.
year	2000
title	Ensino de Projeto com Inserção da Informática Aplicada: O curso de Arquitetura e Urbanismo da UNICAMP (Design Teaching with the Introduction of Applied Computing: The Architecture and Urbanism course at UNICAMP)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 352-354
summary	This paper discusses the formal educational base of the Architecture course of the State University of Campinas, UNICAMP, which opened in 1999. Applied computing, thoerical content and technical aspects of design are principal educational elements of the course. The paper will show and discuss the structure of building up knowledge for design activities through drafting, applied computing and theory and practical design disciplines present in the course.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	6810
authors	Makkonen, Petri
year	1999
title	On multi body systems simulation in product design
source	KTH Stockholm
summary	The aim of this thesis is to provide a basis for efficient modelling and software use in simulation driven product development. The capabilities of modern commercial computer software for design are analysed experimentally and qualitatively. An integrated simulation model for design of mechanical systems, based on four different "simulation views" is proposed: An integrated CAE (Computer Aided Engineering) model using Solid Geometry (CAD), Finite Element Modelling (FEM), Multi Body Systems Modelling (MBS) and Dynamic System Simulation utilising Block System Modelling tools is presented. A theoretical design process model for simulation driven design based on the theory of product chromosome is introduced. This thesis comprises a summary and six papers. Paper A presents the general framework and a distributed model for simulation based on CAD, FEM, MBS and Block Systems modelling. Paper B outlines a framework to integrate all these models into MBS simulation for performance prediction and optimisation of mechanical systems, using a modular approach. This methodology has been applied to design of industrial robots of parallel robot type. During the development process, from concept design to detail design, models have been refined from kinematic to dynamic and to elastodynamic models, finally including joint backlash. A method for analysing the kinematic Jacobian by using MBS simulation is presented. Motor torque requirements are studied by varying major robot geometry parameters, in dimensionless form for generality. The robot TCP (Tool Center Point) path in time space, predicted from elastodynamic model simulations, has been transformed to the frequency space by Fourier analysis. By comparison of this result with linear (modal) eigen frequency analysis from the elastodynamic MBS model, internal model validation is obtained. Paper C presents a study of joint backlash. An impact model for joint clearance, utilised in paper B, has been developed and compared to a simplified spring-damper model. The impact model was found to predict contact loss over a wider range of rotational speed than the spring-damper model. Increased joint bearing stiffness was found to widen the speed region of chaotic behaviour, due to loss of contact, while increased damping will reduce the chaotic range. The impact model was found to have stable under- and overcritical speed ranges, around the loss of contact region. The undercritical limit depends on the gravitational load on the clearance joint. Papers D and E give examples of the distributed simulation model approach proposed in paper A. Paper D presents simulation and optimisation of linear servo drives for a 3-axis gantry robot, using block systems modelling. The specified kinematic behaviour is simulated with multi body modelling, while drive systems and control system are modelled using a block system model for each drive. The block system model has been used for optimisation of the transmission and motor selection. Paper E presents an approach for re-using CAD geometry for multi body modelling of a rock drilling rig boom. Paper F presents synthesis methods for mechanical systems. Joint and part number synthesis is performed using the Grübler and Euler equations. The synthesis is continued by applying the theory of generative grammar, from which the grammatical rules of planar mechanisms have been formulated. An example of topological synthesis of mechanisms utilising this grammar is presented. Finally, dimensional synthesis of the mechanism is carried out by utilising non-linear programming with addition of a penalty function to avoid singularities.
keywords	Simulation; Optimisation; Control Systems; Computer Aided Engineering; Multi Body Systems; Finite Element Method; Backslash; Clearance; Industrial Robots; Parallel Robots
series	thesis:PhD
last changed	2003/02/12 22:37

_id	ga0010
id	ga0010
authors	Moroni, A., Zuben, F. Von and Manzolli, J.
year	2000
title	ArTbitrariness in Music
source	International Conference on Generative Art
summary	Evolution is now considered not only powerful enough to bring about the biological entities as complex as humans and conciousness, but also useful in simulation to create algorithms and structures of higher levels of complexity than could easily be built by design. In the context of artistic domains, the process of human-machine interaction is analyzed as a good framework to explore creativity and to produce results that could not be obtained without this interaction. When evolutionary computation and other computational intelligence methodologies are involved, every attempt to improve aesthetic judgement we denote as ArTbitrariness, and is interpreted as an interactive iterative optimization process. ArTbitrariness is also suggested as an effective way to produce art through an efficient manipulation of information and a proper use of computational creativity to increase the complexity of the results without neglecting the aesthetic aspects [Moroni et al., 2000]. Our emphasis will be in an approach to interactive music composition. The problem of computer generation of musical material has received extensive attention and a subclass of the field of algorithmic composition includes those applications which use the computer as something in between an instrument, in which a user "plays" through the application's interface, and a compositional aid, which a user experiments with in order to generate stimulating and varying musical material. This approach was adopted in Vox Populi, a hybrid made up of an instrument and a compositional environment. Differently from other systems found in genetic algorithms or evolutionary computation, in which people have to listen to and judge the musical items, Vox Populi uses the computer and the mouse as real-time music controllers, acting as a new interactive computer-based musical instrument. The interface is designed to be flexible for the user to modify the music being generated. It explores evolutionary computation in the context of algorithmic composition and provides a graphical interface that allows to modify the tonal center and the voice range, changing the evolution of the music by using the mouse[Moroni et al., 1999]. A piece of music consists of several sets of musical material manipulated and exposed to the listener, for example pitches, harmonies, rhythms, timbres, etc. They are composed of a finite number of elements and basically, the aim of a composer is to organize those elements in an esthetic way. Modeling a piece as a dynamic system implies a view in which the composer draws trajectories or orbits using the elements of each set [Manzolli, 1991]. Nonlinear iterative mappings are associated with interface controls. In the next page two examples of nonlinear iterative mappings with their resulting musical pieces are shown.The mappings may give rise to attractors, defined as geometric figures that represent the set of stationary states of a non-linear dynamic system, or simply trajectories to which the system is attracted. The relevance of this approach goes beyond music applications per se. Computer music systems that are built on the basis of a solid theory can be coherently embedded into multimedia environments. The richness and specialty of the music domain are likely to initiate new thinking and ideas, which will have an impact on areas such as knowledge representation and planning, and on the design of visual formalisms and human-computer interfaces in general. Above and bellow, Vox Populi interface is depicted, showing two nonlinear iterative mappings with their resulting musical pieces. References [Manzolli, 1991] J. Manzolli. Harmonic Strange Attractors, CEM BULLETIN, Vol. 2, No. 2, 4 -- 7, 1991. [Moroni et al., 1999] Moroni, J. Manzolli, F. Von Zuben, R. Gudwin. Evolutionary Computation applied to Algorithmic Composition, Proceedings of CEC99 - IEEE International Conference on Evolutionary Computation, Washington D. C., p. 807 -- 811,1999. [Moroni et al., 2000] Moroni, A., Von Zuben, F. and Manzolli, J. ArTbitration, Las Vegas, USA: Proceedings of the 2000 Genetic and Evolutionary Computation Conference Workshop Program – GECCO, 143 -- 145, 2000.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	5f96
authors	Qin, S.F., Jordanov, I.N. and Wright, D.K.
year	1999
title	Freehand drawing system using a fuzzy logic concept
source	Computer-Aided Design, Vol. 31 (5) (1999) pp. 359-360
summary	In their paper, Chen and Xie report on the development of a pen-based Fuzzy Freehand Drawing System (FFDS). A Liming multiplier is used in their FFDS to reconstruct ellipses from scattered data.
series	journal paper
last changed	2003/05/15 10:56

_id	1c27
authors	Xi, F. and Shu, B.
year	1999
title	CAD-based path planning for 3-D line laser scanning
source	Computer-Aided Design, Vol. 31 (7) (1999) pp. 473-479
summary	The problem of path planning for 3-D line laser scanning is addressed in this article. The path under study is for a line, as opposed to a point in conventional CNC and CMMtoolpath planning. While the objective of the latter case is to drive a point along a curve, that of the former case is to drive a line across a surface. To solve this problem, a pathplanning method is developed. First, a slicing approach is put forward to divide a part CAD model into a number of sections, since the laser scanning line is limited by thescanning width and a single scanning pass cannot cover the whole surface. Second, for each section, a scanning pass is generated to cover the section surface. To ensure amaximum coverage for each section, the surface profile is determined, and the top of the scanning window is set along the upper boundary of the surface profile. Third,combination of scanning all the sections forms a complete scan of a surface. It is shown that with the proposed method a 3-D line laser scanning process can be effectivelyautomated.
keywords	3-D Line Laser Scanning, Path Planning Method, Tool Path Planning
series	journal paper
email
last changed	2003/05/15 21:33

_id	1570
authors	Sowizral, H.A. and Deering, M.F.
year	1999
title	The Java 3D API and Virtual Reality
source	IEEE Computer Graphics and Applications, May/June
summary	Java 3D proves a natural choice for any Java programmer wanting to write an interactive 3D graphics program. A programmer constructs a scene graph containing graphic objects, lights, sounds, environmental effects objects, and behavior objects that handle interactions or modify other objects in the scene graph. The programmer then hands that scene graph to Java 3D for execution. Java 3D starts rendering objects and executing behaviors in the scene graph. Virtual reality applications go through an identical writing process. However, before a user can use such an application, Java 3D must additionally know about the user's physical characteristics (height, eye separation, and so forth) and physical environment (number of displays, their location, trackers, and so on). Not surprisingly, such information varies from installation to installation and from user to user. So Java 3D lets application developers separate their application's operation from the vagaries of the user's final display environment. The Java 3D application programmer's interface (API) provides a very flexible platform for building a broad range of graphics applications. Developers have already used Java 3D to build applications in a variety of domains including mechanical CAD, molecular visualization, scientific visualization, animation previews, geographic information systems, business graphics, 3D logos, and educational offerings. Virtual reality applications have included immersive workbench applications, headtracked shutter-glass-based desktop applications, and portals (a cave-like room with multiple back-projected walls).
series	journal paper
last changed	2003/04/23 15:50

No more hits.