CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 626

_id b070
authors Yu, W. and Skibniewski, M.J.
year 1999
title Quantitative constructability analysis with a neuro-fuzzy knowledge-based multi-criterion decision support system
source Automation in Construction 8 (5) (1999) pp. 553-565
summary This paper presents a multi-criterion decision model for quantitative constructability analysis based on a neuro-fuzzy knowledge-based system. The traditional constructability definition is modified so that constructability can be quantified, measured, and improved. A multi-layer information aggregation network is proposed to incorporate the manager's subjective preference information. The constructor's technology management policy can be reflected in the constructability evaluation process based on technology implementation preferences. A systematic approach to constructability problem detection and constructability improvement is developed to improve technology performance. Two examples of constructability analyses for alternative concrete formwork technologies are given to demonstrate the functions of the proposed methodology.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:23

_id a8f2
authors Becker, R.
year 1999
title Research and development needs for better implementation of the performance concept in building
source Automation in Construction 8 (4) (1999) pp. 525-532
summary Gaps in basic knowledge, inadequacies in the procedural infrastructure and lack of working tools, that still prevent a more systematic application of the performance concept throughout the building process, are identified. One of the main conclusions is that, despite the vast knowledge accumulated during the years in the fields of ergonometrics, human needs, human factor engineering, architectural design, structural analysis, building physics, building materials and durability analysis, this knowledge is not applied systematically during the building process. The situation is attributed to lack of tools for some of the decision making phases in the process, and to the lack of a common, preferably computerized, design platform that would ensure a comprehensive and quantitative approach to all the relevant performance attributes, link smoothly between the various phases along the project development, and minimizes bias caused by human experts.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:22

_id 6930
authors Cattoni, Edson Luis and Santiago, Alina Goncalves
year 1999
title Lagoa da Conceicao - Florianópolis - Ilha de Santa Catarina: Uma Paisagem em Transformacao II (Conceicao Lagoon - Florianópolis - Ilha of Santa Catarina Island: A Landscape in Transformation II)
source III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 157-160
summary This work presents the study and applied assays (or simulation tests) about the ordination of urban space in the region of Lagoa da Conceição. In the region pressures placed by the growth of urban area and urban network system are in contact conflict with a fragile ecosystem, and with a sustainable development based on tourism. Analysis procedures exploited different forms of Space Syntax trying to examine effects of spatial structure in relation to movement patterns of pedestrians and vehicles. This methodology allowed the comprehension of relation between spatial configuration, transport and soil use, and reveled the interdependence and performance of built space within the restrict regional scale (Lagoa da Conceição) and the total urban structure of the island. This understanding is not limited to the present. Is also includes the study of historic urban evolution, and simulation of existing projects for the future, being an important tool to support project decision process. Consequently, the obtained results bring a new approach for the problem, which makes possible the synthesis of design proposals verifying its implications and consequences.
series SIGRADI
email
last changed 2016/03/10 09:48

_id 98e7
authors Coppola, Carlo
year 1999
title Computers and Creativity in Architecture
source Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 595-602
doi https://doi.org/10.52842/conf.ecaade.1999.595
summary The main purpose of this teaching and research project is to define those principles capable of determining a possible approach to computer-aided design for architecture - not seen as as a mere tool but as a way of supporting decision-making.
keywords Decision-making, Expert Systems, Urban Development, Building Types
series eCAADe
email
last changed 2022/06/07 07:56

_id avocaad_2001_22
id avocaad_2001_22
authors Jos van Leeuwen, Joran Jessurun
year 2001
title XML for Flexibility an Extensibility of Design Information Models
source AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series AVOCAAD
email
last changed 2005/09/09 10:48

_id 41d4
authors Medjdoub, Benachir
year 1999
title Interactive 2D Constraint-Based Geometric Construction System
source Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 197-212
summary This paper presents a 2D Constraint-Based Geometric Construction System where positioning and manipulating geometry is very precise. An unusually simple interface makes this system particularly interactive and easy to use. In our approach, the geometry types supported are: points, lines, circles, ellipses, circular arcs and b-spline curves. All the fundamental topologic constraints, i.e. tangent, parallel, perpendicular, coincident and concentric, are provided. Metric constraints, i.e. dividing the shapes into equal parts or fixing the geometric parameters, are also provided. These constraints are automatically applied by the application in response to the implied intentions of the end- user. Dynamic modifications of partially dimensioned models are supported, whereby the design is modified while enforcing the constraints. A graph-constructive approach is used to solve the model. As we are dealing with partial modifications, this resolution technique is quite sufficient, and makes our system stable and flexible. Our approach focuses highly on interactivity. Positioning a shape constrained to another is made directly through the graphic interface. Constraint relaxation is also done by direct manipulations. Modifications are made by dragging the geometry, or by typing into a numerical panel displaying the free shape parameters. Again, existing constraints are maintained as those numbers are applied. Well -constrained and under-constrained problems are discussed. This approach was developed in Java, JDK 3.0.1 of SGI's Java software.
keywords Sketching, Geometric Constraints, Interactivity, Geometric construction, Dynamic Modifications
series CAAD Futures
email
last changed 2006/11/07 07:22

_id ddss2004_d-49
id ddss2004_d-49
authors Polidori, M. and R. Krafta
year 2004
title Environment – Urban Interface within Urban Growth
source Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 49-62
summary This work presents the synthesis of a model of urban growth dedicated to accomplish simulations of urban spatial dynamics, based on integrated urban and environmental factors and promoting simultaneity among external and internal growth. The city and surrounding environment are captured and modeled in computational ambient, by application of the centrality / potential model (Krafta, 1994 and 1999), with support of graph theory, cellular automata, GIS and geocomputation. The model assumes the city as a field of opportunities for obtaining income, mediated by the space, which is composed of urban and environmental attributes, that work as attractors or as resistances for the urban growth. The space configuration and the distribution of those attributes generate tensions that differentiate qualitatively and quantitatively the space, through the centrality measure (built with the support of graphs techniques), coming to provoke growth in places with larger potential of development (built with the help of techniques of CA – cellular automata). Growths above environmental thresholds are considered problems, generated and overcome in the same process of production of the urban space. Iterations of that process offer a dynamic behaviour to the model, allowing to observe the growth process along the time. The model presents several possibilities: a) urban - natural environment integration; b) internal and external growth integration; c) variety in the scale; d) GIS integration and geocomputation; e) user interface; f) calibration; g) theoretical possibilities; and h) practical possibilities.
keywords Environment, Urban Growth, Urban Morphology, Simulation
series DDSS
last changed 2004/07/03 22:13

_id 3815
authors Qaqish, Ra’ed
year 2001
title VDS/DDS Practice Hinges on Interventions and Simplicity - A Case Study of Hard Realism vs. Distorted Idealism
source Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 249-255
doi https://doi.org/10.52842/conf.ecaade.2001.249
summary This paper reports on a contemporary and laborious ongoing experimental work initiated during the establishment of a new Virtual/Digital design studio “VDS” in Sept. 1999 by CAAD tutors at University of Petra “UOP”. The new VDS/DDS now works as an experimental laboratory to explore several solutions to problems of efficiency in design teaching as a new digital design studio paradigm, in tandem with CAD/Design staff, DS environment, materials and facilities. Two groups of graduating level students participated as volunteers in this experiment. The first group was comprised of three fifth-year architectural design students while the second group was comprised of two fourth-year interior design students. The media currently in use are ArchiCAD 6.5 as a design tool along with CorelDraw 9 as a presentational tool, running on Pentium III computers. The series of experiments evaluated the impression on architectural design studio tuition requirements arising from the changes brought about by the implementation of the new CAD pedagogical approach (VDS/DDS) at UOP. The findings echo several important key issues in tandem with CAAD, such as: the changes brought about by the new design strategies, adaptation in problem solving decision-making techniques, studio employment in terms of environment, means and methods. Other issues are VDS/DDS integration schemes carried out by both students and staff as one team in design studio practice on one hand and the curriculum on the other. Finally, the paper discusses the negative impact of conventional design studio hardliner teaching advocates and students alike whose outlook and impressions undermine and deplete effective CAAD integration and obstruct, in many instances, the improvement of such experiments in a VDS environment.
keywords Design Studio Strategies, Problem Solving Decisions, Transformation And Integration Policies
series eCAADe
email
last changed 2022/06/07 08:00

_id 9dfa
authors Ries, R. and Mahdavi, A.
year 1999
title Environmental Life Cycle Assessment in an Integrated CAD Environment: The Ecologue Approach
source Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 351-363
summary Construction and operation of buildings is a major cause of resource depletion and environmental pollution. Computational performance evaluation tools could support the decision making process in environmentally responsive building design and play an important role in environmental impact assessment, especially when a life cycle assessment (LCA) approach is used. The building domain, however, presents notable challenges to the application of LCA methods. For comprehensive environmental impact analysis to be realized in a computational support tool for the building design domain, such tools must a) have an analysis method that considers the life cycle of building construction, operation, and decommissioning, b) have a representation that is able to accommodate the data and computability requirements of the analysis method and the analysis tool, and c) be seamlessly integrated within a multi-aspect design analysis environment that can provide data on environmentally relevant building operation criteria. This paper reviews the current state of assessment methods and computational support tools for LCA, and their application to building design. Then, the implementation of an application (ECOLOGUE) for comprehensive computational assessment of environmental impact indicators over the building life cycle is presented. The application is a component in a multi-aspect space-based CAD and evaluation environment (SEMPER). The paper describes the use and typical results of ECOLOGUE system via illustrative examples.
keywords Life Cycle Assessment, Integrated Computational Environmental Analysis
series CAAD Futures
email
last changed 2006/11/07 07:22

_id 3d23
authors Sellgren, Ulf
year 1999
title Simulation-driven Design
source KTH Stockholm
summary Efficiency and innovative problem solving are contradictory requirements for product development (PD), and both requirements must be satisfied in companies that strive to remain or to become competitive. Efficiency is strongly related to ”doing things right”, whereas innovative problem solving and creativity is focused on ”doing the right things”. Engineering design, which is a sub-process within PD, can be viewed as problem solving or a decision-making process. New technologies in computer science and new software tools open the way to new approaches for the solution of mechanical problems. Product data management (PDM) technology and tools can enable concurrent engineering (CE) by managing the formal product data, the relations between the individual data objects, and their relation to the PD process. Many engineering activities deal with the relation between behavior and shape. Modern CAD systems are highly productive tools for concept embodiment and detailing. The finite element (FE) method is a general tool used to study the physical behavior of objects with arbitrary shapes. Since a modern CAD technology enables design modification and change, it can support the innovative dimension of engineering as well as the verification of physical properties and behavior. Concepts and detailed solutions have traditionally been evaluated and verified with physical testing. Numerical modeling and simulation is in many cases a far more time efficient method than testing to verify the properties of an artifact. Numerical modeling can also support the innovative dimension of problem solving by enabling parameter studies and observations of real and synthetic behavior. Simulation-driven design is defined as a design process where decisions related to the behavior and performance of the artifact are significantly supported by computer-based product modeling and simulation. A framework for product modeling, that is based on a modern CAD system with fully integrated FE modeling and simulation functionality provides the engineer with tools capable of supporting a number of engineering steps in all life-cycle phases of a product. Such a conceptual framework, that is based on a moderately coupled approach to integrate commercial PDM, CAD, and FE software, is presented. An object model and a supporting modular modeling methodology are also presented. Two industrial cases are used to illustrate the possibilities and some of the opportunities given by simulation-driven design with the presented methodology and framework.
keywords CAE; FE Method; Metamodel; Object Model; PDM; Physical Behavior, System
series thesis:PhD
email
last changed 2003/02/12 22:37

_id b5a1
authors Snijder, H.P.S. and Daru, R.
year 1999
title Representing Floorplans for Interactive Evolutionary Design
source AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 343-346
summary Computer tools that provide support in the early explorative phase of architectural design are rare. In order to explore the solution space of a design problem, architects in general rely on the use of paper and pencil. We are developing a system which will assist the designer in the exploration of a particular design problem, focusing initially on 2D floorplans. The format chosen for this system is one in which the computer, in interaction with the designer, "evolves" designs. A major obstacle associated with the use of an evolutionary approach is the adequate representation of a floorplan in a genome. We propose a tree-structure in which the nodes represent organising-principles that dictate how the leaves attached to it are organised. Figure 1 shows an example of a tree with four levels; the terminal nodes represent the elements to be placed. The first level no only represents an organising-principle, but also a contour; this contour is either fixed (e.g. dictated by the environment) or free to evolve. On either side of the tree-structure two interpretations of this tree are shown.
series AVOCAAD
last changed 2005/09/09 10:48

_id 44c0
authors Van Leeuwen, Jos P.
year 1999
title Modelling architectural design information by features : an approach to dynamic product modelling for application in architectural design
source Eindhoven University of Technology
summary Architectural design, like many other human activities, benefits more and more from the ongoing development of information and communication technologies. The traditional paper documents for the representation and communication of design are now replaced by digital media. CAD systems have replaced the drawing board and knowledge systems are used to integrate expert knowledge in the design process. Product modelling is one of the most promising approaches in the developments of the last two decades, aiming in the architectural context at the representation and communication of the information related to a building in all its aspects and during its complete life-cycle. However, after studying both the characteristics of the product modelling approach and the characteristics of architectural design, it is concluded in this research project that product modelling does not suffice for support of architectural design. Architectural design is characterised mainly as a problem solving process, involving illdefined problems that require a very dynamic way of dealing with information that concerns both the problem and emerging solutions. Furthermore, architectural design is in many ways an evolutionary process. In short term this is because of the incremental approach to problem solving in design projects; and in long term because of the stylistic development of designers and the continuous developments in the building and construction industry in general. The requirements that are posed by architectural design are concentrated in the keywords extensibility and flexibility of the design informationmodels. Extensibility means that designers can extend conceptual models with definitions that best suit the design concepts they wish to utilise. Flexibility means that information in design models can be structured in a way that accurately represents the design rationale. This includes the modelling of incidental characteristics and relationships of the entities in the model that are not necessarily predefined in a conceptual model. In general, product modelling does not adequately support this dynamic nature of design. Therefore, this research project has studied the concepts developed in the technology of Feature-based modelling, which originates from the area of mechanical engineering. These concepts include the usage of Features as the primitives for defining and reasoning about a product. Features have an autonomous function in the information model, which, as a result, constitutes a flexible network of relationships between Features that are established during the design process. The definition of Features can be specified by designers to formalise new design concepts. This allows the design tools to be adapted to the specific needs of the individual designer, enlarging the library of available resources for design. In addition to these key-concepts in Feature-based modelling as it is developed in the mechanical engineering context, the project has determined the following principles for a Feature-based approach in the architectural context. Features in mechanical engineering are used mainly to describe the lowest level of detail in a product's design, namely the characteristics of its parts. In architecture the design process does not normally follow a strictly hierarchical approach and therefore requires that the building be modelled as a whole. This implies that multiple levels of abstraction are modelled and that Features are used to describe information at the various abstraction levels. Furthermore, architectural design involves concepts that are non-physical as well as physical; Features are to be used for modelling both kinds. The term Feature is defined in this research project to reflect the above key-concepts for this modelling approach. A Feature is an autonomous, coherent collection of information, with semantic meaning to a designer and possibly emerging during design, that is defined to formalise a design concept at any level of abstraction, either physical or non-physical, as part of a building model. Feature models are built up entirely of Features and are structured in the form of a directed graph. The nodes in the graph are the Features, whereas the arcs are the relationships between the Features. Features can be of user-defined types and incidental relationships can be added that are not defined at the typological level. An inventory in this project of what kind of information is involved in the practice of modelling architectural design is based on the analysis of a selection of sources of architectural design information. This inventory is deepened by a case study and results in the proposition of a categorisation of architectural Feature types.
keywords Automated Management Information Systems; Computer Aided Architectural Design; Information Systems; Modelling
series thesis:PhD
email
more http://www.ds.arch.tue.nl/jos/thesis/
last changed 2003/02/12 22:37

_id cf2011_p109
id cf2011_p109
authors Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year 2011
title Automated Cost Analysis of Concept Design BIM Models
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords building information modeling, interoperability, cost analysis, IFC
series CAAD Futures
email
last changed 2012/02/11 19:21

_id 6d88
authors Achten, Henri H. and Van Leeuwen, Jos P.
year 1999
title Feature-Based High Level Design Tools - A Classification
source Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 275-290
summary The VR-DIS project aims to provide design support in the early design stage using a Virtual Reality environment. The initial brief of the design system is based on an analysis of a design case. The paper describes the process of analysis and extraction of design knowledge and design concepts in terms of Features. It is demonstrated how the analysis has lead to a classification of design concepts. This classification forms one of the main specifications for the VR-based design aid system that is being developed in the VR-DIS programme. The paper concludes by discussing the particular approach used in the case analysis and discusses future work in the VR-DIS research programme.
keywords Features, Feature-Based modelling, Architectural Design, Design Process, Design Support
series CAAD Futures
email
last changed 2006/11/07 07:22

_id 37c2
authors Ahmad Rafi, M.E.
year 1999
title Visualisation of Design Using Animation for Virtual Prototyping
source Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 519-525
doi https://doi.org/10.52842/conf.ecaade.1999.519
summary Although recent technology in time-based representation has vastly improved, animation in virtual prototype design field remains the same. Some designers invest a huge amount of money in the latest visualisation and multimedia technology and yet may create even worse animation. They often cramp sequences resulting in many viewers failing to interpret the design positively as they miss a lot of vital information that explains the design. This paper basically reports the importance of film-making understanding for producing good virtual prototype animation. It will be based on a part of a research project on the use of time-based media in architectural practices. It also includes an empirical analysis of several architectural-based documentary films (including an interview with the film director) and past and present computer animation. This paper then concludes with recommendations of good techniques for making animated visualisation relative to the stage at which the animation is produced for better design decision.
keywords Virtual Prototype, Animation, Time-Based, Film-Making
series eCAADe
email
last changed 2022/06/07 07:54

_id ga9925
id ga9925
authors Ambrosini, L., Longatti, M. and Miyajima, H.
year 1999
title Time sections, abstract machines
source International Conference on Generative Art
summary conditions a time-spatial discontinuity in the urban grid, ancient walls casually discovered in a substrate of the contemporary town needs a surplus of information to be understood and interfaced with their current condition. diagrams diverse chronological stages of the urban evolution are mapped on the area, in order to read the historical stratifications as a multiplicity of signs; this abstract approach leads to consider the roman space as guided by metrics, a system of measure superimposed on the landscape, vs. medioeval spatial continuity, where more fluid relations between the same urban elements create a completely different pattern.assemblage (time sections) a surface, automatically displaced from the medioeval diagram, moves along the z axis, the historical stratification direction, intersecting in various, unpredictable, manners a series of paths; these paths start as parallels, allowing an undifferentiated access to the area, and mutate along their developing direction, intertweening and blending each other; linear openings are cut on the surface, virtually connecting the two levels by light, following the roman grid in rhythm and measure. Projected on the lateral wall, the cadence of the vertical and horizontal elements becomes a temporal diagram of the design process.movement time takes part into the process through two kinds of movement: the first one, freezed when reaches the best results, in terms of complexity, is given by the surface intersecting the tubular paths; the second one is represented by multiple routes walking on which the project can be experienced (in absence of any objective, fixed, point of view, movement becomes the only way to understand relations). Thresholds between typical architectural categories (such as inside-outside, object-landscape etc.) are blurred in favour of a more supple condition, another kind of continuity (re)appears, as a new media, between the different historical layers of the city.
series other
more http://www.generativeart.com/
last changed 2003/08/07 17:25

_id 295d
authors Amor, R.W., Hosking, J.G. and Mugridge, W.B.
year 1999
title ICAtect-II: a framework for the integration of building design tools
source Automation in Construction 8 (3) (1999) pp. 277-289
summary The development of a system capable of integrating a range of building design tools poses many challenges. Our framework for integrating design tools provides a structured approach, allowing individual parts to be developed independently. In this paper, we describe the overall framework and suggest a method for modeling and implementing each portion of the framework. Furthermore, we illustrate how such a system can integrate several design tools and be realized as a functional design system.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:22

_id ga9922
id ga9922
authors Annunziato, M. and Pierucci, P.
year 1999
title The Art of Emergence
source International Conference on Generative Art
summary Since several years, the term emergence is mentioned in the paradigm of chaos and complexity. Following this approach, complex system constituted by multitude of individual develop global behavioral properties on the base of local chaotic interactions (self-organization). These theories, developed in scientific and philosophical milieus are rapidly spreading as a "way of thinking" in the several fields of cognitive activities. According to this "way of thinking" it is possible revise some fundamental themes as the economic systems, the cultural systems, the scientific paths, the communication nets under a new approach where nothing is pre-determined, but the global evolution is determined by specific mechanisms of interaction and fundamental events (bifurcation). With a jump in scale of the life, also other basic concepts related to the individuals as intelligence, consciousness, psyche can be revised as self-organizing phenomena. Such a conceptual fertility has been the base for the revision of the artistic activities as flexible instruments for the investigation of imaginary worlds, metaphor of related real worlds. In this sense we claim to the artist a role of "researcher". Through the free exploration of new concepts, he can evoke qualities, configurations and hypothesis which have an esthetical and expressive value and in the most significant cases, they can induce nucleation of cultural and scientific bifurcation. Our vision of the art-science relation is of cooperative type instead of the conflict of the past decades. In this paper we describe some of the most significant realized artworks in order to make explicit the concepts and basic themes. One of the fundamental topics is the way to generate and think to the artwork. Our characterization is to see the artwork not as a static finished product, but as an instance or a dynamic sequence of instances of a creative process which continuously evolves. In this sense, the attention is focused on the "generative idea" which constitutes the envelop of the artworks generable by the process. In this approach the role of technology (computers, synthesizers) is fundamental to create the dimension of the generative environment. Another characterizing aspect of our artworks is derived by the previous approach and specifically related to the interactive installations. The classical relation between artist, artwork and observers is viewed as an unidirectional flux of messages from the artist to the observer through the artwork. In our approach artist, artwork and observer are autonomous entities provided with own personality which jointly intervene to determine the creative paths. The artist which generate the environment in not longer the "owner" of the artwork; simply he dialectically bring the generative environment (provided by a certain degree of autonomy) towards cultural and creative "void" spaces (not still discovered). The observers start from these platforms to generate other creative paths, sometimes absolutely unexpected , developing their new dialectical relations with the artwork itself. The results derived by these positions characterize the expressive elements of the artworks (images, sequences and sounds) as the outcomes of emergent behavior or dynamics both in the sense of esthetical shapes emergent from fertile generative environments, either in terms of emergent relations between artist, artwork and observer, either in terms of concepts which emerge by the metaphor of artificial worlds to produce imaginary hypothesis for the real worlds.
series other
more http://www.generativeart.com/
last changed 2003/08/07 17:25

_id edf5
authors Arnold, J.A., Teicholz, P. and Kunz, J.
year 1999
title An approach for the interoperation of web-distributed applications with a design model
source Automation in Construction 8 (3) (1999) pp. 291-303
summary This paper defines the data and inference requirements for the integration of analysis applications with a product model described by a CAD/CAE application. Application input conditions often require sets of complex data that may be considered views of a product model database. We introduce a method that is compatible with the STEP and PLIB product description standards to define an intermediate model that selects, extracts, and validates views of information from a product model to serve as input for an engineering CAD/CAE application. The intermediate model framework was built and tested in a software prototype, the Internet Broker for Engineering Services (IBES). The first research case for IBES integrates applications that specify certain components, for example pumps and valves, with a CAD/CAE application. This paper therefore explores a sub-set of the general problem of integrating product data semantics between various engineering applications. The IBES integration method provides support for a general set of services that effectively assist interpretation and validate information from a product model for an engineering purpose. Such methods can enable application interoperation for the automation of typical engineering tasks, such as component specification and procurement.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:22

_id 2fe1
authors Arroyo, Julio and Chiarella, Mauro
year 1999
title Infographic: Its Incorporation and Relativity in Architectural Design Process
source III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 313-318
summary This paper is about an architectural design workshop regularly held at a public university in Santa Fe, Argentina. The class is about 150 students large, with different informatic capabilities and hardware facilities. The design problem of the workshop, which is one year long, is the relationship between architectural project and the construction of the urbanity. This implies both a physical intervention and a cultural expression. Pedagogy seeks students to overcome individualism, characteristic that is hardly induced by PCs, making a socialized design experience. A complementary and simultaneous use of graphic and infographic data is one of the main criteria of the workshop. The idea is to look for students to reach a wide vision by means of the use of different representation systems and means of information. Digital graphic is introduced early in the design process as an electronic model of urban context. It is considered as a one among many other graphic resources and is used together with ordinary models, geometric drawings, aerial and regular photography and hand made sketches. This paper relates the results that have been obtained when students were asked to make an analytic and sensitive approach to the relationship site - urban situation. This relationship has a great importance for the workshop since its goal is to make students to understand the the value of designing in and for the city.
series SIGRADI
email
last changed 2016/03/10 09:47

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 31HOMELOGIN (you are user _anon_111037 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002