Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 631

Reformat results as: short short into frame detailed detailed into frame

_id	c1b6
authors	Ries, R.
year	1999
title	Computational Analysis of the Environmental Impact of Building Designs
source	Carnegie Mellon University, Pittsburgh
summary	Concem for the environmental implications of human activities is becoming increasingly important to society. The concept of current development that does not compromise future generations! abilities to meet their needs is a goal for many communities and individuals (WCED 1987). These concerns require the evaluation and assessment of the potential environmental impact of human activities so that informed choices can be made. Building construction and operation activities are of significant importance in view of a) national and intemational economies, 6) resource consumption, c) human occupancy, and d) environmental impact. For example, in the United States the built environment represents an extensive investment, both as an annual expenditure and as an aggregate investment. In the mid-l980’s, up to 30% of new and remodeled buildings had indoor air quality related complaints. Buildings also consume approximately 35% of the primary energy in the U.S. every year, resulting in the release of 482 million metric tons of carbon in 1993.I Methods developed to assess the environmental impact of buildings and development patterns can and have taken multiple strategies. The most straightforward and simple methods use single factors, such as energy use or the mass of pollutant emissions as indicators of environmental performance. Other methods use categorization and weighting strategies. These gauge the effects of the emissions typically based on research studies and use a weighting or effect formulation to normalize, compare, and group emissions so that a scalar value can be assigned to a single or a set of emissions. These methods do not consider the characteristics of the context where the emissions occur.
series	thesis:MSc
email
last changed	2003/02/12 22:37

_id	bacd
authors	Abadí Abbo, Isaac
year	1999
title	APPLICATION OF SPATIAL DESIGN ABILITY IN A POSTGRADUATE COURSE
source	Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 75-82
summary	Spatial Design Ability (SDA) has been defined by the author (1983) as the capacity to anticipate the effects (psychological impressions) that architectural spaces or its components produce in observers or users. This concept, which requires the evaluation of spaces by the people that uses it, was proposed as a guideline to a Masters Degree Course in Architectural Design at the Universidad Autonoma de Aguascalientes in Mexico. The theory and the exercises required for the experience needed a model that could simulate spaces in terms of all the variables involved. Full-scale modeling as has been tested in previous research, offered the most effective mean to experiment with space. A simple, primitive model was designed and built: an articulated ceiling that allows variation in height and shape, and a series of wooden panels for the walls and structure. Several exercises were carried out, mainly to experience cause -effect relationships between space and the psychological impressions they produce. Students researched into spatial taxonomy, intentional sequences of space and spatial character. Results showed that students achieved the expected anticipation of space and that full-scale modeling, even with a simple model, proved to be an effective tool for this purpose. The low cost of the model and the short time it took to be built, opens an important possibility for Institutions involved in architectural studies, both as a research and as a learning tool.
keywords	Spatial Design Ability, Architectural Space, User Evaluation, Learning, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:27

_id	becb
authors	Anders, Peter
year	1999
title	Electronic Extension: Some implications of cyberspace for the practice of architecture
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 276-289
doi	https://doi.org/10.52842/conf.acadia.1999.276
summary	This white-paper builds upon previous research to present hybrids of electronic and physical spaces as extensions of current design practice. It poses an hypothetical project - a hybrid of physical and cyberspaces - to be developed through an extrapolation of current architectural practice by fully exploiting new information technologies. The hybrid's attributes not only affect the scope of development but the very activities of the design team and client during - and after - deployment. The entire life cycle of the project is affected by its dual material and media presence. The paper concludes by discussing the effect the hybrid - here called a "cybrid" - on the occupant, and its local and global communities. It reviews the economics, administration, marketing, operation, flexibility, and extension of the project to assess its effects on these scales. The conclusions are provisional owing to the youth of the technologies. However, in laying out these issues, the author hopes to begin a discussion on effects computation will have on our built environment.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	f11d
authors	Brown, K. and Petersen, D.
year	1999
title	Ready-to-Run Java 3D
source	Wiley Computer Publishing
summary	Written for the intermediate Java programmer and Web site designer, Ready-to-Run Java 3D provides sample Java applets and code using Sun's new Java 3D API. This book provides a worthy jump-start for Java 3D that goes well beyond the documentation provided by Sun. Coverage includes downloading the Java 2 plug-in (needed by Java 3D) and basic Java 3D classes for storing shapes, matrices, and scenes. A listing of all Java 3D classes shows off its considerable richness. Generally, this book tries to cover basic 3D concepts and how they are implemented in Java 3D. (It assumes a certain knowledge of math, particularly with matrices, which are a staple of 3D graphics). Well-commented source code is printed throughout (though there is little additional commentary). An applet for orbiting planets provides an entertaining demonstration of transforming objects onscreen. You'll learn to add processing for fog effects and texture mapping and get material on 3D sound effects and several public domain tools for working with 3D artwork (including converting VRML [Virtual Reality Markup Language] files for use with Java 3D). In all, this book largely succeeds at being accessible for HTML designers while being useful to Java programmers. With Java 3D, Sun is betting that 3D graphics shouldn't require a degree in computer science. This book reflects that philosophy, though advanced Java developers will probably want more detail on this exciting new graphics package. --Richard Dragan Topics covered: Individual applets for morphing, translation, rotation, and scaling; support for light and transparency; adding motion and interaction to 3D objects (with Java 3D classes for behaviors and interpolators); and Java 3D classes used for event handling.
series	other
last changed	2003/04/23 15:14

_id	ga9906
id	ga9906
authors	Caglioti, Giuseppe
year	1999
title	Ambiguity in Art and Science
source	International Conference on Generative Art
summary	Ambiguity can be defined as the coexistence and/or coalescence of two incompatible aspects in the same reality. Ambiguity manifests itself * in pathologic processes occurring in matter, e.g. at the critical state of the solid ¬ ® liquid phase transformation. * during the process of measurement of quantum structures: a process formally very similar to the process of perception. * Systematically, in our mind, during the process of perception - especially during visual perception of paintings or acoustic perception of music.Therefore ambiguity is an intrinsic feature of the process of perception and an intriguing step in the way toward the formation of thought. Ambiguity is continuosly experienced in our mind: every act of perception culminates into the critical state of a dynamic instability of the interiorized image, where the incoherent heap of sensory stimuli merges into coherent visual or auditive thinking. In turn, since perception is essential for life, we should look at ambiguity not so much as to a fastidious travel companion, but rather as to a fixed course toward perception itself, scientific thought and aesthetic emotion: ambiguity is a permanent cultural value.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	6930
authors	Cattoni, Edson Luis and Santiago, Alina Goncalves
year	1999
title	Lagoa da Conceicao - Florianópolis - Ilha de Santa Catarina: Uma Paisagem em Transformacao II (Conceicao Lagoon - Florianópolis - Ilha of Santa Catarina Island: A Landscape in Transformation II)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 157-160
summary	This work presents the study and applied assays (or simulation tests) about the ordination of urban space in the region of Lagoa da Conceição. In the region pressures placed by the growth of urban area and urban network system are in contact conflict with a fragile ecosystem, and with a sustainable development based on tourism. Analysis procedures exploited different forms of Space Syntax trying to examine effects of spatial structure in relation to movement patterns of pedestrians and vehicles. This methodology allowed the comprehension of relation between spatial configuration, transport and soil use, and reveled the interdependence and performance of built space within the restrict regional scale (Lagoa da Conceição) and the total urban structure of the island. This understanding is not limited to the present. Is also includes the study of historic urban evolution, and simulation of existing projects for the future, being an important tool to support project decision process. Consequently, the obtained results bring a new approach for the problem, which makes possible the synthesis of design proposals verifying its implications and consequences.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	69f5
authors	Chan, C., Maves, J. and Cruz-Neira, C.
year	1999
title	An Electronic Library for Teaching Architectural History
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 335-344
doi	https://doi.org/10.52842/conf.caadria.1999.335
summary	This research project developed an electronic library of significant buildings chosen to represent seven selected periods of Western architectural history: Egyptian (Mortuary temple of Queen Hatshepsut), Greek (Parthenon), Roman (Pantheon), Romanesque (Speyer Cathedral), Gothic (Notre Dame Cathedral), Renaissance (Tempietto), and Modern (Des Moines Art Center). All buildings were reconstructed in their original or intended forms based on plans, drawings, photographs, and historical texts. Two products were generated by this project: (1) materials to be displayed on the World Wide Web, including rendered still images for perception, movies for a visual guide, and Virtual Reality Modeling Language (VRML) models for user navigation; and (2) virtual reality (VR) models to be displayed in the C2 (an improved version of the Cave Automatic Virtual Environment or CAVE facility). The benefits of these VR models displayed on the Web and in the C2 are their easy accessibility at any time from various geographic locations and the immersive experience that enhances viewersÌ understanding of the effects of spatial proportions on form and of colors on materials.
series	CAADRIA
more	http://archvr.design.iastate.edu/miller
last changed	2022/06/07 07:56

_id	2995
authors	Gabriel, Gerard Cesar and Maher, Mary Lou
year	1999
title	Coding and Modelling Communication in Architectural Collaborative Design
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 152-166
doi	https://doi.org/10.52842/conf.acadia.1999.152
summary	Although there has been some research done on collaborative face-to-face (FTF) and video-conferencing sessions involving architects, little is know about the effects these different mediums have on collaborative design in general and collaborative communication and design representation in particular. In this paper we argue that successful computer-mediated collaborative design (CMCD) does not necessarily mean emulating close proximity environments. In order to investigate this view, we carried out experiments examining the effect and significance of different communication channels in collaborative sessions between architects. The experiments were conducted in different environments and classified into three categories. The first category is FTF. The second computer mediated collaborative design sessions with full communication channels CMCD-a. The third category was conducted also through computer mediated collaborative design sessions but with limited communication channels CMCD-b. A custom coding scheme is developed using data, external and theoretically derived coding categories as a base. Examples of how the proposed coding scheme works are given from all three categories of experiments. The coding scheme provides the basis for modeling and understanding communication in collaborative design.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	5e85
authors	Heylighen, Ann and Neuckermans, Herman
year	1999
title	Learning from Experience: Promises, Problems and Side-effects of CBD in Architecture
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 567-575
doi	https://doi.org/10.52842/conf.ecaade.1999.567
summary	Learning from design experience is the essence of Case-Based Design (CBD). Because architects are said to learn design by experience, CBD seems to hold great promises for architectural design, which have inspired various CBD tools. Learning from the experience of developing and using these tools is the objective of this paper. On the one hand, the original expectations seem far from being accomplished today. Reasons for this limited success can be found at three different levels. Level one is the cognitive model underlying CBD, which raises some specific difficulties within the field of architecture. At the level of implementation, few tools manage to draw the full consequences of this view, thus leading to an oversimplification of CBD and/or architectural design. Level three has to do with introducing CBD tools in design education and assessing the effects of this introduction. On the other hand, CBD seems to have caused some interesting side effects, such as an increased interest in creativity and copyright, and the recent re-discovery of the key-role cases play inside and outside the field of CAAD. Thus, although its promises may not be fulfilled, CBD definitely can contribute to design education, be it sometimes without the support of computer technology.
keywords	Case-Based Design, Design Education
series	eCAADe
email
last changed	2022/06/07 07:50

_id	d39e
authors	Holicky, M.
year	1999
title	Fuzzy probabilistic optimisation of building performance
source	Automation in Construction 8 (4) (1999) pp. 437-443
summary	Fundamental performance criteria between action effects and relevant performance requirements for serviceability, safety, comfort and functionality are analyzed, assuming randomness of the effect action and both randomness and fuzziness of performance requirements. Randomness due to natural variability of basic variables is handled by commonly used probability theory methods, fuzziness due to vague or imprecise definitions of performance requirements is described by basic tools of the recently developed theory of fuzzy sets. Both types of uncertainties are combined in newly defined fuzzy probabilistic measures of building performance, damage function and fuzzy probability of performance failure, which are then analysed and applied similarly as conventional probabilistic quantities. An illustrative example of optimization of vibration constraints for building structures due to occupancy comfort indicates that commonly considered limiting values for acceleration may be uneconomical. However, theoretical models used to describe fuzzy probabilistic properties of performance requirements need to be reexamined using adequate experimental data.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	5c07
authors	Lee, H.-L., Liu, Y.-T., Chen, S.-C., Tang, S.-K. and Huang, C.-P., Huang, C.-H., Chang, Y.-L., Chang, K.-W. and Chen, K.-Y.
year	2002
title	A Comparative study of protocol analysis for - Spatiality of a Text-based Cyberspace
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 262-266
doi	https://doi.org/10.52842/conf.ecaade.2002.262
summary	Graduate Institute of Architecture, National Chiao Tung University, Hsinchu, 30050, TAIWAN The adaptation of the word cyberspace (Gibson, 1984) following the emergence of the World Wide Web Internet not only succinctly revolutionized the correlation of time and space but also poised to challenge how we view the existing spatial concept. This research tries to use protocol analysis to examine text-based cyberspace, such as bulletin board, chart rooms and so forth, and the objective of this research is to realize the spatiality of cyberspace through the cognitive point of view, and to compare the differences of the definitions and perception ways of spatiality between people with general domain and in design fields. Finally, we validate the existence of cyberspace, where the process not only allows further categorization of spatial elements concluded from the earlier study, but discover that varied backgrounds can affect how a user defines and perceives cyberspace (Strate, 1999).
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ga0009
id	ga0009
authors	Lewis, Matthew
year	2000
title	Aesthetic Evolutionary Design with Data Flow Networks
source	International Conference on Generative Art
summary	For a little over a decade, software has been created which allows for the design of visual content by aesthetic evolutionary design (AED) [3]. The great majority of these AED systems involve custom software intended for breeding entities within one fairly narrow problem domain, e.g., certain classes of buildings, cars, images, etc. [5]. Only a very few generic AED systems have been attempted, and extending them to a new design problem domain can require a significant amount of custom software development [6][8]. High end computer graphics software packages have in recent years become sufficiently robust to allow for flexible specification and construction of high level procedural models. These packages also provide extensibility, allowing for the creation of new software tools. One component of these systems which enables rapid development of new generative models and tools is the visual data flow network [1][2][7]. One of the first CG packages to employ this paradigm was Houdini. A system constructed within Houdini which allows for very fast generic specification of evolvable parametric prototypes is described [4]. The real-time nature of the software, when combined with the interlocking data networks, allows not only for vertical ancestor/child populations within the design space to be explored, but also allows for fast "horizontal" exploration of the potential population surface. Several example problem domains will be presented and discussed. References: [1] Alias \| Wavefront. Maya. 2000, http://www.aliaswavefront.com [2] Avid. SOFTIMAGE. 2000, http://www.softimage.com [3] Bentley, Peter J. Evolutionary Design by Computers. Morgan Kaufmann, 1999. [4] Lewis, Matthew. "Metavolve Home Page". 2000, http://www.cgrg.ohio-state.edu/~mlewis/AED/Metavolve/ [5] Lewis, Matthew. "Visual Aesthetic Evolutionary Design Links". 2000, http://www.cgrg.ohio-state.edu/~mlewis/aed.html [6] Rowley, Timothy. "A Toolkit for Visual Genetic Programming". Technical Report GCG-74, The Geometry Center, University of Minnesota, 1994. [7] Side Effects Software. Houdini. 2000, http://www.sidefx.com [8] Todd, Stephen and William Latham. "The Mutation and Growth of Art by Computers" in Evolutionary Design by Computers, Peter Bentley ed., pp. 221-250, Chapter 9, Morgan Kaufmann, 1999.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	55d9
authors	Martens, Bob and Oberascher, Leonhard
year	1999
title	Using the Endoscope in the Country of Lilliput
source	Simulation of Architectural Space - Color and Light, Methods and Effects [Proceedings of the 4rd European Architectural Endoscopy Association Conference / ISBN 3-86005-267-5] Dresden (Germany), 29 September - 1 October 1999, pp. 22-26
summary	The present contribution focuses on the interaction of light and color in the context of spatial changes. A project study on ”Color Overlay” from the study course ”Experimental Color Design” issued the focal point for consideration. The relation between projection and original in the scale model results in incomplete but useful findings on the effects to be expected. Only in the course of the full-scale model test series the performed activities were to be clearly recognized. This contribution thus intends to disentangle the relation web between scale (endoscopic) model viewing and simulation in true size.
keywords	Color Effects, Color Overlay, Endoscopy, Simulation in Full-scale
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	94b4
authors	Matalasov, M. and Lapshina, Je.
year	1999
title	Modelling (Simulation) and Reality
source	Simulation of Architectural Space - Color and Light, Methods and Effects [Proceedings of the 4rd European Architectural Endoscopy Association Conference / ISBN 3-86005-267-5] Dresden (Germany), 29 September - 1 October 1999, pp. 32-35
summary	In a terms of studying and practical design a sufficient experience of analytic work of our lab shows, that the view of suggesting scheme on the same kind of process development is accompanied by sadden mistakes or conscious inaccuracies.Traditional conventions of architectural models same times with no paying attention to scale and size may drive to cause of distortion from the points of view to them. Power and possibilities of modern CAD initiates same sort of temptations and errors. For our point of view, solving the above problems is having same restrictions, one of which, may be – providing a visual coincidence of the videoframes of building site and it’s model done whether by small scale modelling or CAD. According to our practice a different methods of superimposing of real and designing spaces are shown in this article.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	9757
authors	Matalasov, M. and Zavrajine, K.
year	1999
title	Some problems of the light and colour factor in Videosimulation
source	Simulation of Architectural Space - Color and Light, Methods and Effects [Proceedings of the 4rd European Architectural Endoscopy Association Conference / ISBN 3-86005-267-5] Dresden (Germany), 29 September - 1 October 1999, pp. 58-61
summary	Daylighting lets to reveal 3D plastic imagination of building and architectural form. Being of the main time for perception of architecture, daylight helps to solve two principal questions: volumetric-spatial and coloristic solution. Experience of the work shows, that modelling in the natural light on the earliest step helps to understand chosen design comparatively and to take essential correction operatively.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	ga9910
id	ga9910
authors	Mottram, Chiron and Penn, Alan
year	1999
title	Slugfest
source	International Conference on Generative Art
summary	This paper describes the creation of interactive and responsive digital art. By adding a message handling interpreter to SGI's Performer software we have created a medium within which interactions between virtual objects and interactions with the user are made possible. By making objects within the medium responsive to each other it is possible to create emergent effects. By making the medium responsive to the user the viewer is more intimately involved in the artwork. However, at the same time this requires the artist to work with the intrinsic properties of emergence in the system to and to develop the audience relationship by means of involvement in a manner more akin to performance than the plastic arts.The use of virtual reality allows the creation of a profusion of different forms and behaviours not possible in conventional plastic media. The aesthetic of these forms can be governed in two ways, either by in built rules or by direct intervention by the artist/audience persona. The built in rules can be changed dynamically as can the objects' actions as mediated by the viewer's intervention. Underlying this is the aesthetic produced by the machinery of the computer, which can both impede and improve this process, this is the illusion of 3D provided by the Performer libraries in conjuction with the SGI box, and the many constraints implied by this. As such we are also limited by the input devices, though the mouse has now almost become synonymous with the pen, as a means by which our interaction with computer is governed. The paper describes a series of pieces which explore the boundaries of generated and evolving artworks in which kinetics and morphogenesis are integral to investigations of social interaction between virtual performers.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	fbfd
authors	Niemann, Tobias and Schmidt, Alexander
year	1999
title	The Use of New Media Tools n Environmental Simulation
source	Simulation of Architectural Space - Color and Light, Methods and Effects [Proceedings of the 4rd European Architectural Endoscopy Association Conference / ISBN 3-86005-267-5] Dresden (Germany), 29 September - 1 October 1999, pp. 28-31
summary	We propose a new application in environmental simulation using digital techniques and new media tools, namely QuickTimeVirtualReality (QTVR) and QuickTimeMovies (QTMovies). QTVR enables the user to interactively rotate in a 360degree panorama. The QTVR panoramas will be generated from single images taken with analogue endoscopic simulation techniques by using special QTVR software. The different QTVR panoramas of the model can be connected with each other, additionally by integrating QTMovies showing tracking shots from one panorama node to the other. Thus a virtual net from the planned urban place can be built in which the user can interactively move around and explore. Practical use of this application in public participation in urban development is proposed. A simple demoversion of the here described application will be shown at the EAEA 1999.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	29f3
authors	Ohno, Ryuzo and Aoki, Hirofumi
year	1999
title	Development of an Interactive Simulation System for Environment-Behavior Study
source	Simulation of Architectural Space - Color and Light, Methods and Effects [Proceedings of the 4rd European Architectural Endoscopy Association Conference / ISBN 3-86005-267-5] Dresden (Germany), 29 September - 1 October 1999, pp. 36-49
summary	An important recent development in the simulation techniques was the changes in the mode of presentation: from passive mode to active one. It is now possible to present an image according to the observer’s voluntary movement of body and head by means of a head-mounted display. Such interactive simulation system, which allows people to observe what they like to see, is suitable to study environmental perception, because active attention is essential to manipulate enormous information in the environment. The present paper reports two case studies in which an interactive simulation system was developed to test psychological impact of interior and exterior spaces: the case study 1 intended to clarify the effect of the disposition of transparent and opaque surfaces of a room on the occupants’ „sense of enclosure“, the case study 2 intended to make clear some physical features along a street which are influential for changing atmosphere. In addition to the empirical research, an attempt to develop a new simulation system which uses both analogue and digital images is briefly reported, and a preliminary experiment was conducted to test the performance of the simulation system in which such movable elements as pedestrians and cars generated by real-time CG were overlaid on the video image of a scale model street.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	9ce0
authors	Ozcan, Oguzhan
year	1999
title	Education of Interactive Panorama-design in Architecture
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 223-229
doi	https://doi.org/10.52842/conf.ecaade.1999.223
summary	This paper mainly discusses the importance of interactive panorama in design, and its education in the MDes program, which will run at Yildiz Technical University in the year 2000. The first part of the paper summarizes the potentials of current interactive panorama technique, which was "A popular form of the public entertainment" in 19th-century. Then, it compares the real-world experiences with observations in an interactive panorama. This comparison is carried out together with technical aspects i.e. limitations, audio-visual effects, composite techniques, live video input, and conceptual aspects i.e. camera actions, natural phenomenon. The technical discussion in the paper is concentrated on the examples from newly developed tools such as Nodemedia, Electrifier, Wasabi Software, and Skypaint as well as Apple QuickTime VR Authoring Tool. The second part underlines the role of interactive panorama technique in design. In this part, the paper also summarizes how to use the technique at the beginning and, during creation of the design and in its presentation, taking the installation advantages of sound, vision, text and transition effects. The third part concentrates on the interactive panorama design as an individual project, offered in the MDes program. Then it explains how the preliminary courses were planned for this individual project and summarizes the content of the course formulated through the linear and non-linear structures of the media. Finally, considering with the future development of interactive panorama technique, the last part of the paper discusses the possible results of this education method.
keywords	Interactive Media, Panoramic Image, Design Education
series	eCAADe
email
last changed	2022/06/07 08:00

_id	dbd8
authors	Peter Kardos
year	1999
title	The light and colour significance in urban environment perception
source	Simulation of Architectural Space - Color and Light, Methods and Effects [Proceedings of the 4rd European Architectural Endoscopy Association Conference / ISBN 3-86005-267-5] Dresden (Germany), 29 September - 1 October 1999, pp. 50-56
summary	My contribution deals with light and colour effects in wider dimensions of architecture. It analyses their significance in urban environment perception from the application aspect of progressive tools of its forming and creative completion, i.e. the perceptual homomorphous iconic simulations in laboratory conditions. The work focuses on questions of light and colour perception, showing several principles and phenomena valid in visual perception systems. The structure of the perceived picture is interpreted in its four components: colour, motion, form and spaciousness. Each of the components is shown with relevant biological reactions and their reflections in subjective perception processes. The selected image examples document some manifestations of urbanistic structures and spaces experience transformation in natural and artificial lighting conditions. The emphasis of my contribution lies on some demonstrations from the laboratory experiment in investigating the illumination and colour influence on the architectural design quality, and on examples of alternative methods of visual interpretation on endoscopic modelling simulation outputs. The conclusion of my work formulates some knowledge and statement of objective colour and light modelling simulation assets in architectural design quality.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

For more results click below: