Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 617

Reformat results as: short short into frame detailed detailed into frame

_id	7da7
authors	Benedetti, Cristina and Salvioni, Giulio
year	1999
title	The Use of Renewable Resource in Architecture: New Teaching Methodologies
doi	https://doi.org/10.52842/conf.ecaade.1999.751
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 751-756
summary	The program is organized into four parts. Each is very much connected, both logically and methodologically, so that the unit as a whole consists of a content and method of access that are not divided up. This method is not in a chronological order that simply goes in one direction, rather it allows the user to "refer back", in real time and in different directions. For the simple purpose of explanation, the sections of the program are listed as follows: (-) "Basic information" concerns the basics of bioclimatic and timber architecture. Without this knowledge, the other two sections would be difficult to understand; (-) "Actual buildings throughout the world"; give examples of architectural quality; they concretize the basics of bioclimatic and timber architecture; (-) "Students' Masters Theses", that follow on from the basic information and the learning experience "in the field", and guided by the lecturer, have a critical approach to actual buildings throughout the world. (-) A multimedia data-sheet organized to ensure a clear and straightforward presentation of information about the construction products. It relies on a tab-based navigation interface that gives users access to eight different stacked windows.
keywords	Architecture, Multimedia, Timber, Bioclimatic, Classification
series	eCAADe
email
last changed	2022/06/07 07:54

_id	f288
authors	Bille, Pia
year	1999
title	Integrating GIS and Electronic Networks In Urban Design and Planning
doi	https://doi.org/10.52842/conf.ecaade.1999.722
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
summary	In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords	Urban Planning, Electronic Collaboration, GIS, Data Bases
series	eCAADe
email
last changed	2022/06/07 07:54

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	1ead
authors	Dinand, Munevver Ozgur and Ozersay, Fevzi
year	1999
title	CAAD Education under the Lens of Critical Communication Theories and Critical Pedagogy: Towards a Critical Computer Aided Architectural Design Education (CCAADE)
doi	https://doi.org/10.52842/conf.ecaade.1999.086
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 86-93
summary	Understanding the dominant ethos of our age is imperative but not easy. However it is quite evident that new technologies have altered our times. Every discipline is now forced to be critical in developing new concepts according to the realities of our times. Implementing a critical worldview and consciousness is now more essential than ever. Latest changes in information technology are creating pressure on change both in societal and cultural terms. With its direct relation to these technologies, computer aided architectural design education, is obviously an outstanding / prominent case within contemporary debate. This paper aims to name some critical points related to computer aided architectural design education (CAADE) from the perspective of critical communication studies and critical education theories. It tries to relate these three areas, by introducing their common concepts to each other. In this way, it hopes to open a path for a language of critique. A critique that supports and promotes experimentation, negotiation, creativity, social consciousness and active participation in architectural education in general, and CAADE in specific. It suggests that CAADE might become critical and produce meta-discourses [1 ] in two ways. Firstly, by being critical about the context it exists in, that is to say, its relationships to the existing institutional and social structures and secondly by being critical about the content it handles; in other words by questioning its ideological dimensions. This study considers that analysing the role of CAADE in this scheme can provide architectural education with the opportunity to make healthy projections for the future.
keywords	Critical Theories, Critical Pedagogy, Critical CAADE
series	eCAADe
email
last changed	2022/06/07 07:55

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	600e
authors	Gavin, Lesley
year	1999
title	Architecture of the Virtual Place
doi	https://doi.org/10.52842/conf.ecaade.1999.418
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 418-423
summary	The Bartlett School of Graduate Studies, University College London (UCL), set up the first MSc in Virtual Environments in the UK in 1995. The course aims to synthesise and build on research work undertaken in the arts, architecture, computing and biological sciences in exploring the realms of the creation of digital and virtual immersive spaces. The MSc is concerned primarily with equipping students from design backgrounds with the skills, techniques and theories necessary in the production of virtual environments. The course examines both virtual worlds as prototypes for real urban or built form and, over the last few years, has also developed an increasing interest in the the practice of architecture in purely virtual contexts. The MSc course is embedded in the UK government sponsored Virtual Reality Centre for the Built Environment which is hosted by the Bartlett School of Architecture. This centre involves the UCL departments of architecture, computer science and geography and includes industrial partners from a number of areas concerned with the built environment including architectural practice, surveying and estate management as well as some software companies and the telecoms industry. The first cohort of students graduated in 1997 and predominantly found work in companies working in the new market area of digital media. This paper aims to outline the nature of the course as it stands, examines the new and ever increasing market for designers within digital media and proposes possible future directions for the course.
keywords	Virtual Reality, Immersive Spaces, Digital Media, Education
series	eCAADe
email
more	http://www.bartlett.ucl.ac.uk/ve/
last changed	2022/06/07 07:51

_id	5e85
authors	Heylighen, Ann and Neuckermans, Herman
year	1999
title	Learning from Experience: Promises, Problems and Side-effects of CBD in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1999.567
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 567-575
summary	Learning from design experience is the essence of Case-Based Design (CBD). Because architects are said to learn design by experience, CBD seems to hold great promises for architectural design, which have inspired various CBD tools. Learning from the experience of developing and using these tools is the objective of this paper. On the one hand, the original expectations seem far from being accomplished today. Reasons for this limited success can be found at three different levels. Level one is the cognitive model underlying CBD, which raises some specific difficulties within the field of architecture. At the level of implementation, few tools manage to draw the full consequences of this view, thus leading to an oversimplification of CBD and/or architectural design. Level three has to do with introducing CBD tools in design education and assessing the effects of this introduction. On the other hand, CBD seems to have caused some interesting side effects, such as an increased interest in creativity and copyright, and the recent re-discovery of the key-role cases play inside and outside the field of CAAD. Thus, although its promises may not be fulfilled, CBD definitely can contribute to design education, be it sometimes without the support of computer technology.
keywords	Case-Based Design, Design Education
series	eCAADe
email
last changed	2022/06/07 07:50

_id	65b4
authors	Kos, Jose Ripper
year	1999
title	Architecture and Hyperdocument: Data Shaping Space
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 462-465
summary	The computer interface can't convey the hole experience of walking through a city or a building. Nevertheless, the complexity of all the aspects involved in those threedimensional spaces can be better understood through the non-linearity of the hyperdocument. Each dweller of a city and a building has many layers of relationship with both. The sequence and the extent each observer explores the space is unique. It’s not totally apprehended in a first visit. As the observer knows better that space, his experience changes. A similar situation takes place in a multimedia application. Hence, it's possible to build an analogy between the architectonic or urban structure and a hyperdocument navigation structure. We can also state that the computer is critical to create paths of architectural information through space and time. The 3D model of a city is a powerful basis to structure the hyperdocument navigation. The city can be viewed in separate parts or layers of information. One investigates the city through different aspects of its configuration and explores it in different scales and levels of detail. The images generated from this 3D model can be combined with video, photo, sound and text, organizing the information which gives form to the city. The navigation through this information, addresses the citty by its economy, housing, religion, politics, leisure, projects, symbolic buildings, and other aspects. This paper will discuss these issues through the experiments of the research done at the School of Architecture and Urbanism of the Universidade Federal do Rio de Janeiro. The research group at the "Laboratory of Urban Analysis and Digital Representation" in PROURB (Graduate Program of Urbanism) analyses the city and its buildings using CD-ROMs and websites.
keywords	3D City Modeling, Hyperdocument, Multimedia, Architecture, Urbanism
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	687c
authors	Kosco, Igor
year	1999
title	How the World Became Smaller
doi	https://doi.org/10.52842/conf.ecaade.1999.230
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 230-237
summary	The world of computers became fruitful and independent before the new millennium started. New technologies and methods are giving us new tools and possibilities every day as well as the challenge how to use them. The advantage of architecture and namely of architects teaching at the universities or schools is remarkable: new techniques reflect the education, research and practice - and what is important - by one person. The links between practice and university from the point of view: how the computer technologies and CAAD influences methods of designing, managing and collaboration are very important in both directions. It grows with the number of students who left university with good computer skills on one side and number of architectural and engineering offices using computers on the other. Networks and Internet enables to exchange data but also experiences. Internet itself is not only a tool for surfing and enjoying or the source of information, but preferably like a powerful tool for collaboration, workgroups, virtual studios or long distance education. This paper describes experiences from research and educational projects between Slovak Technical University, IUG Grenoble, University of Newcastle and others and their influence on architectural education and practice.
keywords	Long-Distance Education, Research, Practice
series	eCAADe
email
last changed	2022/06/07 07:51

_id	a25e
authors	Loy, Hollis A.
year	1999
title	Foundation for a Thorough CAAD Education
doi	https://doi.org/10.52842/conf.ecaade.1999.301
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 301-308
summary	The birth and development of computing is considered by most as one of the greatest technological achievements of the twentieth century. Since the integration of computers in the built environment, over two decades ago, computing methods developed into efficient designing and calculating tools. In contrast, accelerating advancements in computing technology have created generation gaps amongst architects. There are inexperienced, novice, intermediate and advanced computer-capable architects. If each group was asked to define CAAD, some would still describe it as a computer program for technical draughting. Others may define CAAD (Computer Aided Architectural Design) as a vast array of digital media in CAD, multimedia and DTP, assisting architects in compiling visual presentations. Currently, most architectural schools are capable of instructing most, if not all, facets of CAAD (2D & 3D CAD, model rendering, photo montage, brochure layouts, etc.). However, this knowledge is accumulated at random throughout the course of study. "Computer Graphics for Architects" is the latest educational development in Europe bridging generation gaps with senior architects and serving as an introductory CAAD seminar to beginning architecture students. This book and lecture presents a gallery of recent architectural CAD, multimedia, and DTP presentations practiced in Europe´s second largest architectural firm. The terminology is user-friendly and its content concentrates on responding to the most often posed questions by CAAD beginners relating to: (1) Terminology (2) Appearance (3) Time Consumption (4) Cost Techniques introduced are independent of any platform. The goal is to summarize quickly and effectively the countless possibilities of presentations applicable in architecture practice. "Computer Graphics for Architects" provides a direction for future presentations and motivates students to excel in CAAD.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	9ce0
authors	Ozcan, Oguzhan
year	1999
title	Education of Interactive Panorama-design in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1999.223
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 223-229
summary	This paper mainly discusses the importance of interactive panorama in design, and its education in the MDes program, which will run at Yildiz Technical University in the year 2000. The first part of the paper summarizes the potentials of current interactive panorama technique, which was "A popular form of the public entertainment" in 19th-century. Then, it compares the real-world experiences with observations in an interactive panorama. This comparison is carried out together with technical aspects i.e. limitations, audio-visual effects, composite techniques, live video input, and conceptual aspects i.e. camera actions, natural phenomenon. The technical discussion in the paper is concentrated on the examples from newly developed tools such as Nodemedia, Electrifier, Wasabi Software, and Skypaint as well as Apple QuickTime VR Authoring Tool. The second part underlines the role of interactive panorama technique in design. In this part, the paper also summarizes how to use the technique at the beginning and, during creation of the design and in its presentation, taking the installation advantages of sound, vision, text and transition effects. The third part concentrates on the interactive panorama design as an individual project, offered in the MDes program. Then it explains how the preliminary courses were planned for this individual project and summarizes the content of the course formulated through the linear and non-linear structures of the media. Finally, considering with the future development of interactive panorama technique, the last part of the paper discusses the possible results of this education method.
keywords	Interactive Media, Panoramic Image, Design Education
series	eCAADe
email
last changed	2022/06/07 08:00

_id	b34d
authors	Russell, P., Kohler, N., Forgber, U., Koch, V. and Rügemer, J.
year	1999
title	Interactive Representation of Architectural Design: The Virtual Design Studio as an Architectural Graphics Laboratory
doi	https://doi.org/10.52842/conf.ecaade.1999.459
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 459-465
summary	This paper introduces the Virtual Design Studio (VDS), an internet based design studio environment established by ifib. VDS transfers lessons learned through research projects in the field of Computer Supported Co-operative Work (CSCW) being carried out at ifib into design education. By training for interdisciplinary co-operation within the design process, the students will become better prepared for the flexibility and co-operability required in planning situations. Increasing the communication and co-operation in the planning process can be achieved through the implementation of IT based virtual workspaces. In the design studio setting, this is done through the use of available internet software and technologies. The methodology of the VDS is briefly described including specific assignments intended to focus student investigations into specific areas including the representation of their work using the world wide web. The pedagogical expectations are discussed and anecdotal evidence precedes an general evaluation of the teaching method. The authors postulate that one of the unintended by-products of the studio is the evolution of an effective use of interactivity in the presentation of design concepts, ideas and solutions. A handful of student work is presented to describe the different approaches taken in using the world wide web (WWW) to display project work. A description of the local evolution (VDS specific) of graphical methods and technologies is followed by a comparison with those used in traditional settings. Representation is discussed with focus on the ability of the WWW to replace, augment or corrupt other methods of presentation. The interactive nature of web based presentations induces alterations to the narration of architectural work and can enhance the spatial perception of design space. Space Perception can be enabled through geometrically true VRML representations, the inclusion of auditory sensations, the abstraction of representation through the use of advertising techniques as well as the introduction of non-linear narrative concepts. Examples used by students are shown. A critical assessment of these new representational methods and the place of current new media within the context of architectural representation is discussed.
keywords	Virtual Design Studio, Architectural Graphics, Teaching
series	eCAADe
email
last changed	2022/06/07 07:56

_id	d267
authors	Verbeke, J. Provoost, T., Verleye, J., Nys, K., Van Zutphen, R., Achten, H., Turksma, A., Pittioni, G., Asanowicz, A., Jakimowicz A. and Af Klercker, J.
year	1999
title	AVOCAAD, The Experience
doi	https://doi.org/10.52842/conf.ecaade.1999.244
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 244-251
summary	The Leonardo da Vinci project AVOCAAD (Added Value of Computer Aided Architectural Design) aims at stimulating creative and experimental use of computers in the field of Architecture and Construction by the use of new technologies. For this purpose, a large set of exercises and exercise materials was developed and is now available through an interactive web-site. This allows regular students as well as architects in practice to continuously seek for a more interesting and inspiring use of computers and IC-technology, adding value in their own field of interest and work. The interactive web-site generates a virtual forum for exchange of ideas. The AVOCAAD partners as well as the newly joined partners are currently using and testing the available teaching materials (exercises, foreground and background information) with students. Moreover a small design exercise in the context of the project has been the theme of a workshop held at the AVOCAAD 1999 conference. Students and architects were asked to create a design in a predefined space based on experimental architectural music. This paper intends to report on the experiences we gained in using the interactive web-site, the exercises and also doing the workshop. We will address the pedagogical implications of issues like learning environment, continuous and distance learning, and focus on their impact towards CAAD curricula. Examples and results will illustrate the general framework.
keywords	AVOCAAD, CAAD, Creativity, LLL, ODL
series	eCAADe
email
more	http://www.avocaad.org
last changed	2022/06/07 07:58

_id	ca5e
authors	Yamaguchi, Shigeyuki and Toizumi, Kanou
year	1999
title	Computer Suported Face-to-Face Meeting Environment for Architectural Design Collaboration
source	InterSymp-99[International Conference on Systems Research, Infomatics and Cybernetics/ISBN:0-921836-75-9] Baden-Baden(Germany), August2-6, 1999, pp. 39-47
summary	This paper describes our current work in the development of a collaborative design meeting environment which includes hardware and software. It attempts to support the design collaboration in face-to-face meetings, instead of collaboration in Cyberspace. Pinup walls, a meeting table, white boards are metaphors on the proposed system. Digitized design information, CAD drawings, CG pictures or movies and other documents could be accessible to members sitting for testing, simulating, evaluating design ideas or concepts on the projected video screen using installed program modules or off-the-shelf application programs. They could concentrate on discussing design issues, without interruptions caused by looking for some lost information and preparing design models or documents at their desks.
keywords	Collaborative Design, Design Meeting, Face-to-face Meeting, Interface to design information,Room-ware
series	other
email
last changed	2002/09/14 11:26

_id	aef9
id	aef9
authors	Brown, A., Knight, M. and Berridge, P. (Eds.)
year	1999
title	Architectural Computing from Turing to 2000 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.ecaade.1999
source	eCAADe Conference Proceedings / ISBN 0-9523687-5-7 / Liverpool (UK) 15-17 September 1999, 773 p.
summary	The core theme of this book is the idea of looking forward to where research and development in Computer Aided Architectural Design might be heading. The contention is that we can do so most effectively by using the developments that have taken place over the past three or four decades in Computing and Architectural Computing as our reference point; the past informing the future. The genesis of this theme is the fact that a new millennium is about to arrive. If we are ruthlessly objective the year 2000 holds no more significance than any other year; perhaps we should, instead, be preparing for the year 2048 (2k). In fact, whatever the justification, it is now timely to review where we stand in terms of the development of Architectural Computing. This book aims to do that. It is salutary to look back at what writers and researchers have said in the past about where they thought that the developments in computing were taking us. One of the common themes picked up in the sections of this book is the developments that have been spawned by the global linkup that the worldwide web offers us. In the past decade the scale and application of this new medium of communication has grown at a remarkable rate. There are few technological developments that have become so ubiquitous, so quickly. As a consequence there are particular sections in this book on Communication and the Virtual Design Studio which reflect the prominence of this new area, but examples of its application are scattered throughout the book. In 'Computer-Aided Architectural Design' (1977), Bill Mitchell did suggest that computer network accessibility from expensive centralised locations to affordable common, decentralised computing facilities would become more commonplace. But most pundits have been taken by surprise by just how powerful the explosive cocktail of networks, email and hypertext has proven to be. Each of the ingredients is interesting in its own right but together they have presented us with genuinely new ways of working. Perhaps, with foresight we can see what the next new explosive cocktail might be.
series	eCAADe
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	19a8
authors	Schultz, Volkher
year	1999
title	A DIDACTIC CONCEPT FOR TRAINING ARCHITECTS AND INTERIOR DECORATORS
source	Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 29-39
summary	The 20th year anniversary of the Lichtlabor is used as an opportunity to look back. Two decades in a period of rapid technological development is a long time, during which furnishings pass or fail their trial period. The organizational structure of the Lichtlabor which includes lay-out and appliances has continually expanded since 1977 although the theoretical approach has not changed. Even the ideational structure of the Lichtlabor, without which an organizational structure would be worthless, has proved to be workable and effective as a didactic concept. This concept is based on the interdisciplinary midpoint between a technically (basic) understanding of light – a combination of abstract knowledge and experience gained – and its design-related application.
keywords	Lighting Laboratory, Interior Design, Didactic Concept, Visual Comfort, Architectural Space, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:28

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ae61
authors	Af Klercker, Jonas
year	1999
title	CAAD - Integrated with the First Steps into Architecture
doi	https://doi.org/10.52842/conf.ecaade.1999.266
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 266-272
summary	How and when should CAAD be introduced in the curriculum of the School of Architecture? This paper begins with some arguments for starting CAAD education at the very beginning. At the School of Architecture in Lund teachers in the first year courses have tried to integrate CAAD with the introduction to architectural concepts and techniques. Traditionally the first year is divided by several subjects running courses separatly without any contact for coordination. From the academic year 96/97 the teachers of Aplied aestetics, Building Science, Architectural design and CAAD have decided to colaborate as much as possible to make the role of our different fields as clear as possible to the students. Therefore integrating CAAD was a natural step in the academic year 98/99. The computer techniques were taught one step in advance so that the students can practise their understanding of the programs in their tasks in the other subjects. The results were surprisingly good! The students have quickly learned to mix the manual and computer techniques to make expressive and interesting visual presentations of their ideas. Some students with antipaty to computers have overcome this handicap. Some interesting observations are discussed.
keywords	Curriculum, First Year Studies, Integration, CAAD, Modelling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	36d3
authors	Af Klercker, Jonas
year	1999
title	A CAVE-Interface in CAAD-Education?
doi	https://doi.org/10.52842/conf.caadria.1999.313
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 313-323
summary	The so called "CAVE-interface" is a very interesting and thrilling development for architects! It supports a better illusion of space by exposing almost a 270° view of a computer model than the 60° which can be viewed on an ordinary computer screen. At the Lund University we have got the possibility to experiment with a CAVE-installation, using it in research and the education of CAAD. The technique and three experiments are discribed. The possibilities are discussed and some problems and questions are put forward.
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: