Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 630

Reformat results as: short short into frame detailed detailed into frame

_id	151f
authors	Sonia, A.L., Burgos, I. and Szentpaly, I.
year	1999
title	Un Producto Estratégico para la Gestión Territorial: Sigit Tamare (A Strategic Product for the Territorial Management: Sigit Tamare)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 235-238
summary	Beyond its proposed objectives, implementing the Tamare Geographical and Territorial Information System represents a strategic experience for the involved institutions: Zulia´s University Architecture and Design Faculty, PDVSA the State owned petroleum Company; and municipal authorities from the East Coast. These project with participation the petroleum industry and Zulia University, highlights the significance of close interinstitutional and intergovernmental collaboration. The presentation, after a brief reference to objectives, describes characteristics and theoretical development of the system, and emphasizes the implementation phase, designed in three steps, and the participation of each one of the involved institutions. The conclusions establish the reasons why this project is considered to be a strategic product resulting from the joint effort and coordination of different organizations. The benefits obtained by each, including the Tamare Urban Community, represent an achievement for local urban management, within the Venezuelan decentralization process, that widely justifies the joint effort and continuity of this project.
keywords	Information System, Geographical Information System, Territorial Information System, Strategic Product, System Implementation
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	d43d
authors	Yu, Dazhong
year	1999
title	Public Participation in Urban Design Based on Information Technology
doi	https://doi.org/10.52842/conf.caadria.1999.393
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 393-402
summary	For years, lack of public participation has affected the quality of design and planning. The developing cities constantly face the anti-development sentiments on the part of local residents because of controversial decision of development. Rapid development of information technology provides us with a chance to mend the delay of communication with the public in design procedure. It makes it possible to get the resident's reaction to a new project. Unlike a purely CAD-based environment, computer application to urban design is based on a blend of computer-aided design, spatial information system, and interactive multimedia. It is the combination of geometric, geographic, and annotated information and the need of data integration by collaboration and meanwhile it provides opportunities of participation. Due to the position at the crossover of architecture, landscape architecture, and planning, urban design attempts to control the proceeding in both design improvisations and socio-economic policies. In this proceeding, public participation plays an important role in exchanging opinions with the masses. In the situation of participation in China, we can synthesize some useful methods of public participation in the urban design by means of computer simulation, computer communication, and diverse software and tools, etc.
series	CAADRIA
last changed	2022/06/07 07:57

_id	5f9c
authors	Castello, Regina
year	1999
title	GIS and the Investigation of the Environmental Heritage
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 219-224
summary	This paper presents an investigation on the architectural, natural, and cultural resources in the southern part of the state of Rio Grande do Sul, according to their historical or environmental value, identifying natural and cultural elements known and valued by local communities, regardless their experts’ classification. Resources are identified by means of geographical information systems, combined with field information. The area comprises the coastal strip and the plains located in the last frontier of the Brazilian territory and the water system dominated by the lakes Patos, Mangueira and Mirim. The inventory of the environmental, sociocultural and economic heritage provides the necessary insight for issuing new development alternatives based on local resources. Research activities will include: the ellaboration of general and thematic maps, based on LANDSAT 5 [bands 3, 4 and 5] images; aerial photographs; DSG/SGE and municipal maps [scales 1:250.000, 1:50.000 and 1:25.000]; field work for the recognition of remarkable elements; interviews with residents for assessing their perception of local values; and community and institutional statements. These informations, comprising the elements valued by their architectural and urban quality, historical relevance and environmental significance, organised in a database, will provide contextual guidelines for the planning of a tourist route. This route, delineated by the preservation, recovery and use of representative local resources, valued as expressions of a native culture, evocates the initial occupation of the gaúcho territory, and may be touristically promoted as "The Gaúcho’s Way". The project also aims at showing the potential offered by GIS for identifying and evaluating specific spatial characteristics.
keywords	Environmental Planning, Historical Preservation
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	170f
authors	Mora Padrón, Víctor Manuel
year	1999
title	Integration and Application of Technologies CAD in a Regional Reality - Methodological and Formative Experience in Industrial Design and Products Development
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 295-297
summary	The experience to present is begun and developed during the academic year 1998, together to the course of IV pupils level of the Industrial Design career in the Universidad del Bío-Bío, labor that I have continued assuming during the present year, with a new youths generation. We have accomplished our academic work taking as original of study and base, the industrial and economic situation of the VIII Region, context in the one which we outline and we commit our needs formative as well as methodological to the teaching of the discipline of the Industrial Design. Consequently, we have defined a high-priority factor among pupils and teachers to reach the objectives and activities program of the course, the one which envisages first of all a commitment of attitude and integrative reflection among our academic activity and the territorial human context in the one which we inhabit. In Chile the activity of the industrial designer, his knowledge and by so much his capacity of producing innovation, it has been something practically unknown in the industrial productive area. However, the current national development challenges and the search by widening our markets, they have created and established a conscience of the fact that the Chilean industrial product must have a modern and effective competitiveness if wants be made participates in segments of the international marketing. It is in this new vision where the design provides in decisive form to consider and add a commercial and cultural value in our products. To the university corresponds the role of transmitting the knowledge generated in his classrooms toward the society, for thus to promote a development in the widest sense of the word. Under this prism the small and median regional industry in their various areas, have not integrated in the national arrangement in what concerns to the design and development of new and integral products. The design and the innovation as motor concept for a competitiveness and permanency in new markets, it has not entered yet in the entrepreneurial culture. If we want to save this situation, it is necessary that the regional entrepreneur knows the importance of the Design with new models development and examples of application, through concrete cases and with demands, that serve of base to demonstrate that the alliance among Designer and Industry, opens new perspectives of growth upon offering innovation and value added factors as new competitiveness tools. Today the communication and the managing of the information is a strategic weapon, to the moment of making changes in a social dynamics, so much at local level as global. It is with this look that our efforts and objective are centered in forming to our pupils with an integration speech and direct application toward the industrial community of our region, using the communication and the technological information as a tool validates and effective to solve the receipt in the visualization of our projects, designs and solutions of products. As complement to the development of the proposed topic will be exhibited a series of projects accomplished by the pupils for some regional industries, in which the three dimensional modeling and the use of programs vectoriales demonstrate the efficiency of communication and comprehension of the proposals, its complexity and constructive possibilities.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ascaad2007_025
id	ascaad2007_025
authors	Speed, C.
year	2007
title	A Social Dimension to Digital Architectural Practice
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 291-304
summary	In 1995 the first in a series of three books were published by Academy Editions, that have since become a vivid handbook that documents how designers responded to the development of architectural drawing applications and the growth of the internet, to establish a form of digital architecture. Offering dramatic images and emotive texts, many of the architects and designers featured in these books deeply affected the perception of digital architecture’s mission by students and elements of the design community. Concentrating upon how to resolve the view that time and space are separate dimensions, and the immersive and dematerial potentials of cyberspace, the developments of this ‘cyberromanticism’ (Coyne 1999) ultimately were not used to sustain digital architectural activity. This paper uses the Academy Editions series to understand how such a vivid aspect of digital architecture failed to fulfil its aspirations. The paper begins by establishing the premise for digital architecture through a link with mainstream architectures interest in the concept of shelter. Through a summary of the practical and theoretical methods outlined by the early designers within the series of publications, the paper demonstrates the critical potential of the field. However a summary of how the proliferation of early imagery fuelled a visual mannerism traces how the third Architects in Cyberspace publication represented a crisis in both identity and practice. The paper then identifies an opportunity for recovering the theoretical imperatives within digital architecture by reflecting upon the emergence of ‘interactive architectures’ use of a ‘social’ dimension that was previously hindered by the use of computer applications in early digital architecture. The paper closes with a reference to two of the authors practical projects that use social data to inform the generation of digital architecture.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	f51a
authors	Del Pup, Claudio
year	1999
title	Carbon Pencil, Brush and Mouse, Three Tools in the Learning Process of New University Art Designers
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 420-425
summary	This article develops the introduction of computer technologies in the fine arts environment the use of these new tools, sharing the process of creation and interacting at the same level with older technics, breaks the myth of technology and tries to reach the right place according to current or modern advances. As an introduction, it explains the insertion in the current courses of study of the "computer languages area", its implementation, present situation and future stages. An important point we have developed is the teaching methodology, to solve the transition of those who, challenging their investigations in different areas, like fire arts, graphic arts, film or video, need the support of computers. The first steps consist in designing sample courses, which allow the measurement of results, the definition of concepts like extension, capacities, teaching hours and the most important, a methodology to share the enthusiasm of creation with the difficulties of learning a new technique it is necessary to discover limits, to avoid easy results as a creative tool one of the most important problems we have faced is the necessity of coordinating the process of creation with the individual time of a plastic artist, finding the right way that allows the integration of all the group, minimizing desertion and losing of motivation. Two years later, the first results in the field of digital image investigations and assistance in form design. Volume as a challenge and solutions supported in techniques of modeling in 3D (experiences of modeling a virtual volume from a revolution profile, its particular facts and the parallelism with potter's lathe the handling of image as the most important element, as an work of art itself, but also as a support in the transmission of knowledge (design of a CD as a tool for the department of embryology of medical school with the participation of people from the medical school, engineering school and school of fine arts). Time as a variable, movement, animation and its techniques, multimedia (design of short videos for the 150th anniversary of the Republic University). Conclusions, good hits, adjustments, new areas to include, problems to solve, the way of facing a constantly evolving technology.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	2076
authors	Holmgren, Steen and Rüdiger, Bjarne
year	1999
title	IT in Urban Regeneration Projects
doi	https://doi.org/10.52842/conf.ecaade.1999.708
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 708-713
summary	This paper is about the development of new tools for the residents to use for participation in the planning process and by the professional generating proposals for projects. It deals with two actual research projects, which might be described as transition projects. The projects are Digital 3D City Model of Copenhagen and Urban Architecture in Urban Renewal, - in dialogue between professionals and residents. These projects take their point of departure in the architects traditional working methods and working tools, but they focus on new methods for the dialogue between professionals and inhabitants and on a new visual language based on the digital technology. In this transition situation we see the educated architect as well as the politician and the inhabitant as students in a common learning process. In the end of the paper we introduce a planned project about IT in Urban Renewal. The project is based on an ongoing governmental experiment with involving inhabitants actively in the renewal of their urban area. This project is intended to combine dialogue methods with the use of interactive 3D-digital City models on the Internet.
keywords	3D City modeling, Urban Regeneration, Participation, Dialogue Method, 3D Digital City Model, Urban Architecture
series	eCAADe
email
last changed	2022/06/07 07:50

_id	399e
authors	Kaga, A., Nakahama, K., Hamada, S., Yamaguchi, S., Yamanishi, H. and Sasada, T.
year	1999
title	Collaborative Design System for Citizen Participation in Planning Public Road Projects
doi	https://doi.org/10.52842/conf.caadria.1999.225
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 225-234
summary	The realization of smooth execution of public street enterprise and good communication with inhabitants needs the way of easy and right explanation which the inhabitants understand the street planning, and the scheme of administration and inhabitants make the nice housing environment together. In this paper, the street planing presentation system for inhabitants established by using computer graphics. The applicability of the presentation system is made clear using in the real project.
series	CAADRIA
last changed	2022/06/07 07:52

_id	d2b4
authors	Maver, Tom and Petric, Jelena
year	1999
title	Media in Mediation: Prospects for Computer Assisted Design Participation
doi	https://doi.org/10.52842/conf.acadia.1999.138
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 138-147
summary	One of the most consistent, powerful and philosophical ideas which has run like a silk thread through the short and erratic history of the development of computer aided architectural design is that of user participation in the design decision-making process. It is not an idea with which the architectural profession is particularly comfortable but it is, the authors claim, one which is central to the professional ethic and, therefore, to its ultimate survival. Design decision-making is, if addressed properly, a hugely, complex multi-variety, multi-person process on which precious little serious research has been focused. In the late 1960's the Design Methods Group in the USA and the Design Research Society in the UK formulated paper-based models of the design process and anticipated, in some regards with un-nerving accuracy, the way in which the application of information technologies would impinge beneficially on the process of design decision-making and, therefore, on the quality of the built environment. One concept expressed at that time was as follows: (•) the application of computers to the modeling and prediction of the cost and performance behavior of alternative design solutions allows subjective value judgements to be better informed and more explicitly audited, and that (•) such subjective value judgements should be made by those most affected by them, i.e. the future owners and users of buildings. // This paper is devoted to the critical re-examination of this concept, on the seminal research and development which has kept the notion alive over 30 years, and, most importantly in the context of the theme of ACADIA 1999, how the current advances in multimedia, virtual reality and internet access are not yet making its ubiquitous adoption inevitable: in short, a plea for Media in Mediation.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	23a1
authors	Pereira, A.T.C. and Lima, E.K.M.
year	1999
title	Analysis of a Collaborative Computer Based Design Experience
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 491-495
summary	The design experience referred to in this paper deals with the creative process for developing the pre-design of a new building for the Architecture and Urbanism Department of the Federal University of Santa Catarina / Brazil. The methodological proposition was to develop the design in a collaborative way and to try to use computers from the very beginning of the process. A tri-dimensional computer model was constructed on the sketch phase. Plans, sections and views were generated from this unique 3D model in order to assist development of ideas, coordination and visualization. As soon as the design alterations were defined, the 3D model was updated in order to generate automatic new drawing documents. Due to the number of design team components (8 people) and the high level of design complexity, constant hardcopies were necessary to ease designer’s participation in the idea propositions during meetings.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	0e00
authors	Vásquez de Velasco, Guillermo P.
year	1999
title	La Red Digital de Investigación ""Las Américas"": Una herramienta de colaboración (The Digital Research Network "Las Américas": A Tool for Collaboration)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 384-388
summary	In 1998, thanks to the support of the Program to Enhance Scholarly and Creative Activities of Texas A&M University, the author was able to establish a digital research network that promotes and coordinates collaborative research and development projects at inter-continental level. The original objective was to establish a network of 5 schools of Architecture. This objective was largely surpassed. At the time of editing this paper, the Las Américas Digital Research Network brings together 17 schools of Architecture (from Canada to Argentina). See http://taz.tamu.edu/~americas/ In this collaborative framework, we have been able to identify a number of research and development opportunities. This paper reports on some of the on-going initiatives of the network, namely: a) The Las Americas Virtual Design Studio, b) The Las Americas Virtual Gallery of Visual Arts, c) The Las Americas Research Journal "Archi-Forum" and, d) The Las Americas Curriculum Harmonization Initiative. In addition to a report on current activities, this paper aims to promote new initiatives and identify potential sources of research & development funding. The paper ends with conclusions and a call for widespread participation.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	d59a
authors	Zarnowiecka, Jadwiga C.
year	1999
title	AI and Regional Architecture
doi	https://doi.org/10.52842/conf.ecaade.1999.584
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 584-588
summary	In 1976 Richard Foqué established periods in the development of methods of designing. The first stage (the 50's and early 60's) - automatization of the designing process - properly identified language of description that is understood by a machine is vital. Christopher Alexander publishes 'Pattern Language'. The second stage (late 60's) - the use of the Arts - research techniques as interview, questionnaire, active observation; ergonomic aspects are also taken into consideration. The third stage (starts at the turn of the 60's and 70's) - co-participation of all of the parties involved in the designing process, and especially the user. The designing process becomes more complex but at the same time more intelligible to a non-professional - Alexander's 'Pattern Language' returns. It's been over 20 years now since the publication of this work. In the mid 70's prototypes of integrate building description are created. We are dealing now with the next stage of the designing methods development. Unquestionable progress of computer optimalization of technical and economical solutions has taken place. It's being forecasted that the next stage would be using computer as a simulator of the designing process. This stage may be combined with the development of AI. (Already in 1950 Alan Turing had formulated the theoretical grounds of Artificial Intelligence.) Can the development of the AI have the influence on the creation of present time regional architecture? Hereby I risk a conclusion that the development of AI can contribute to the creation of modern regional architecture.
keywords	Design Process, Artificial Intelligence, Regional Architecture
series	eCAADe
email
last changed	2022/06/07 07:57

_id	2c4a
authors	Aroztegui, Carmen
year	1999
title	The Architect's Use of the Internet - Study of the Architectural Presentation Possibilities
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 363-368
summary	The Internet media is opening new horizons in communication and representation in architecture. However, its use today is superficial, limited, and without creativity. This study will explore theories, methods and examples of how the virtual space of the Internet can be used in its full potential. That means to present ways of observing, understanding, interacting, and communicating the space without precedents in architecture. The existent presentations made by architects in the Internet are in general poor and static. Through the comparative analysis of two presentations of the same architectural space in the Internet and the use of state of the art technology in the Internet, this study will show innovations that will make the exploration of the architectural space more attractive, dynamic and interactive. The main issues will be on one hand, the improvement in the communication of the design through the use of the Internet, and on the other hand, the rise of the standards in the quality of the architectural presentations. This work will project possible implications of the Internet in architecture.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	f317
authors	Arvin, Scott A. and House, Donald H.
year	1999
title	Modeling Architectural Design Objectives in Physically Based Space Planning
doi	https://doi.org/10.52842/conf.acadia.1999.212
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 212-225
summary	Physically based space planning is a means for automating the conceptual design process by applying the physics of motion to space plan elements. This methodology provides for a responsive design process, which allows a designer to easily make decisions whose consequences immediately propagate throughout the design. It combines the speed of automated design methods with the flexibility of manual design methods, while adding a highly interactive quality and a sense of collaboration with the design itself. In our approach, the designer creates a space plan by specifying and modifying graphic design objectives rather than by directly manipulating primitive geometry. The plan adapts to the changing state of objectives by applying the physics of motion to its elements. For design objectives to have an effect on a physically based space plan, they need to be able to apply appropriate forces to space plan elements. Space planning can be separated into two problems, determining topological properties and determining geometric properties. Design objectives can then be categorized as topological or geometric objectives. Topological objectives influence the location of individual spaces, affecting how one space relates to another. Geometric objectives influence the size and shape of space boundaries, affecting the dimensions of individual walls. This paper focuses on how to model a variety of design objectives for use in a physically based space planning system. We describe how topological objectives, such as adjacency and orientation, can be modeled to apply forces to space locations, and how geometric objectives, such as area, proportion, and alignment, can be modeled to apply forces to boundary edges.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	0f1e
authors	Barrionuevo, Luis F.
year	1999
title	Posicionamiento de Volúmenes Arquitectónicos Mediante Algoritmos Evolucionistas (Positioning of Architectural Volumes by Means of Evolutionist Algorithms)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 176-181
summary	Configurational studies involve the groups of elements fulfilling restrictions defined by the designer in Architectural design. According to its necessities and intentions, the planner distributes the components of the group in a certain tridimensional way, establishing a composition. This operative procedure implies a classification system according to typologies that respond to a bigger system, and this in turn to another, until the whole is obtained. From the beginning the pattern should satisfy form restrictions, as well as dimensional and positional restrictions for each part that conforms the whole. Functional requirements are attended for each object satisfying relationships of connectivity and adjacency among them. In this work the parts are restricted by their relative position to a central element. Evolutionary Algorithms (EA) are used to solve this type of problem. Using evolutionary metaphors they originate concepts such as "genes", "chromosomes", "mutation", "crosses” and " population " (among other), which come closer to one of the solutions looked for by the designer, under combinatory stochastic methods. The most appropriate use of EA corresponds to problems of complexity NP-completeness (for example, problems of generation of cases of composition), allowing an efficient although not exhaustive analysis. Applying this technique to the generation of architectural volumes, some obtained results are exemplified.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ca13
authors	Bermúdez, Julio and King, Kevin
year	1999
title	Media Interaction in the Design Proces
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 35-44
summary	Integrating computers in architectural design means to negotiate between centuries-old analog design methods and the new digital systems of production. The difficulty lies in the underdeveloped state of the necessary methods, techniques, and theories to relate traditional and new media. Recent investigations on the use of multiple iterations between manual and electronic systems to advance architectural work show promising results. However, these experiments have not yet either developed a theoretical base that connects their procedures to a larger conceptual framework nor been sufficiently cross-referenced and third party tested to conform a reliable knowledge base.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	37d1
authors	Corona Martíne, Alfonso and Vigo, Libertad
year	1999
title	Before the Digital Design Studio
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 247-252
summary	This paper contains some observations which derive from our work as Studio Professors . In the last years, studios are in a transition phase with the progressive introduction of computers in later stages of the design process. The initiative generally belongs to students rather than to studio masters, since the former are aware that a knowledge of CAD systems will make them able to get work in architects offices. It is the first few Studios that will guide the student in forming a conception of what is architecture . Therefore, we have observer more attentively the way in which he establishes his first competence as a designer. We believe it is useful to clarify design training before we can integrate computers into it. The ways we all learn to design and which we transmit in the Studio were obviously created a long time ago, when Architecture became a subject taught in Schools, no longer a craft to be acquired under a master. The conception of architecture that the student forms in his mind is largely dependent on a long tradition of Beaux-Arts training which survives (under different forms) in Modern Architecture. The methods he or she acquires will become the basis of his creative design process also in professional life. Computer programmes are designed to adapt into the stages of this design process simply as time saving tools. We are interested in finding out how they can become an active part in the creative process and how to control this integration in teaching. Therefore, our work deals mainly with the tradition of the Studio and the conditioning it produces. The next step will be to explore the possiblities and restrictions that will inevitably issue from the introduction of new media.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	26e4
authors	Da Rosa Sampaio, Andrea
year	1999
title	Design Thinking Proces and New Paradigms of Graphic Expression (Design Thinking Proces and New Paradigms of Graphic Expression)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 68-73
summary	It is undeniable that infotechnology has brought significant changes into architectural representation. Whether these changes has altered design conception proccess or are only media matters, is a discussion concerned with the role of graphic expression in architects designs. Is it just a language, or a design thinking tool, fully engaged with the formal solution? Thus, the investigation of the role of represententional systems in the design thinking proccess and the analysis of their intrinsic relationship will approach traditional methods facing the widespread use of Computer Aided Design. There are polemics about the issue: on the one hand, seductive simulations and a plethora of rendering choices available, on the other hand, impersonal expression, to name a few arguments for and against CAD use. Computers have not replaced the straight reciprocity between the acts of conceiving and drawing, between mind and image, which results in manual sketches, quite effective in embodying a design idea. Yet, we have to admit that manipulating complex forms such as Gehry's Guggenheim Museum quickly would not be feasible before CAD advent. We have been faced with new paradigms challenging the graphic expression of architects and urban designers. Besides the consequences of this new reality to design thinking, a crucial point to be stressed at this discussion is the possibility of achieving a balance between the cherished mind-hand intimacy and the available technological resources.
keywords	Traditional Representation, Design Thinking, CAD
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	c21a
authors	Fitzsimons, J. Kent
year	1999
title	Net-Based History of Architecture
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 319-325
summary	History sequences in professional architecture programs must meet broad educational objectives. Inherent in an architect’s education is a tension between the rigorous consideration of important ideas in the history of architecture and the inspired implementation of these ideas in the design studio. A digital history course can bridge the education/training divide by making the study of history emulate the methods and strategies used in the architecture studio. Using a relational database and navigation software, we have developed a course in which students move through a digital environment of text, image, audio and video resources pertaining to broad historical categories in architecture. Charged with producing historical genealogies, students must incorporate current architectural and cultural concerns in their distillation of the history presented by the articles, surveys, manifestoes, photographs, drawings and interviews encountered online. The immersive multimedia environment uses hyperlinks as a structure, placing emphasis on the student’s role in navigation while increasing the possibilities for chance encounters in the material. The delivery of basic material having been accomplished independently by the student, class meetings are used for higher-level discussions of the issues that surface. The project is currently being implemented as a half-semester course in 20th century architecture for a small group of sophomore students in the professional Bachelor of Architecture program. The project’s pedagogical and technical aspects will be discussed with respect to this stage of its development.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	b0c3
authors	Flanagan, Robert
year	1999
title	Designing by Simulation
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 25-30
summary	This article evaluates ‘simulation’ as a contributing factor in architectural design. While computers enhance simulation, they have yet to transform the art of architecture. A partial explanation is found at the extremes of design processes: Gaudí’s Sagrada Família Cathedral of Barcelona is an empiricist’s culminating achievement -- faith expressed in stone. By contrast, SOM’s Sear’s Tower of Chicago is the modernist monument to rational process -- (financial) faith engineered in steel and glass. Gaudí employed an understanding of the heritage of stone and masonry to fashion his design while SOM used precise relationships of mathematics and steel. However, the designs in both the Sear’s Tower and Sagrada Família are restricted by the solutions inherent in the methods. In contrast, student designs often have no inherent approach to building. While the solution may appear to be evident, the method must often be invented; this is potentially more costly and complex than the design itself. This issue is not new to computers, but its hyper--reality is potentially more complex and disruptive. In evaluating the role of computer simulation in architectural design, this article employs two methods: 1.) Exoskeletal design: A limited collection of connected plates is formed and designed through warping, bending and forming. Reference architect Buckminster Fuller. 2.) Endoskeletal design: Curtain wall construction is taken to its minimalist extreme, using pure structure and membrane. Reference artist Christo.
series	SIGRADI
email
last changed	2016/03/10 09:52

For more results click below: