Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 619

Reformat results as: short short into frame detailed detailed into frame

_id	diss_kuo
id	diss_kuo
authors	Kuo, C.J.
year	1999
title	Unsupervised Dynamic Concurrent Computer-Aided Design Assistant
source	Los Angeles: UCLA
summary	The increasing capability of computer-aided architectural design systems has strengthened the role that the computer plays in the workplace. Due to the complexity of developing new techniques and research, these systems are undertaken mostly by scientists and engineers without significant architectural input (Willey, 1991). The design concept of these systems may be based on a well-defined and well-understood process, which is not yet realized in architectural design (Galle, 1994). The output of such research may not be easily adapted into the design process. Most of the techniques assume a complete understanding of the design space (Gero and Maher, 1987) (Willey, 1991). The description or construction of the design space is always time and space consuming, and the result can never be complete due to the ever-changing nature of architectural design. This research intends to initiate a solution for the above problems. The proposed system is an unsupervised-dynamic-concurrent-computer-aided-design assistant. The “unsupervised” means the learning process is not supervised by the user because it is against the designer's nature to “think-aloud” in the design studio and it also increases the work load. It is dynamic because the size of the knowledge base is constantly changing. Concurrent means that there are multiple procedures active simultaneously. This research focuses on learning the operational knowledge from an individual designer and reapplying it in future designs. A computer system for this experiment is constructed. It is capable of The preliminary result shows a positive feedback from test subjects. The purpose of this research is to suggest a potent computational frame within which future developments may flourish.
series	thesis:PhD
last changed	2003/11/28 07:37

_id	3d23
authors	Sellgren, Ulf
year	1999
title	Simulation-driven Design
source	KTH Stockholm
summary	Efficiency and innovative problem solving are contradictory requirements for productdevelopment (PD), and both requirements must be satisfied in companies that strive to remainor to become competitive. Efficiency is strongly related to ”doing things right”, whereasinnovative problem solving and creativity is focused on ”doing the right things”.Engineering design, which is a sub-process within PD, can be viewed as problem solving or adecision-making process. New technologies in computer science and new software tools openthe way to new approaches for the solution of mechanical problems. Product datamanagement (PDM) technology and tools can enable concurrent engineering (CE) bymanaging the formal product data, the relations between the individual data objects, and theirrelation to the PD process. Many engineering activities deal with the relation betweenbehavior and shape. Modern CAD systems are highly productive tools for conceptembodiment and detailing. The finite element (FE) method is a general tool used to study thephysical behavior of objects with arbitrary shapes. Since a modern CAD technology enablesdesign modification and change, it can support the innovative dimension of engineering aswell as the verification of physical properties and behavior. Concepts and detailed solutionshave traditionally been evaluated and verified with physical testing. Numerical modeling andsimulation is in many cases a far more time efficient method than testing to verify theproperties of an artifact. Numerical modeling can also support the innovative dimension ofproblem solving by enabling parameter studies and observations of real and syntheticbehavior. Simulation-driven design is defined as a design process where decisions related tothe behavior and performance of the artifact are significantly supported by computer-basedproduct modeling and simulation.A framework for product modeling, that is based on a modern CAD system with fullyintegrated FE modeling and simulation functionality provides the engineer with tools capableof supporting a number of engineering steps in all life-cycle phases of a product. Such aconceptual framework, that is based on a moderately coupled approach to integratecommercial PDM, CAD, and FE software, is presented. An object model and a supportingmodular modeling methodology are also presented. Two industrial cases are used to illustratethe possibilities and some of the opportunities given by simulation-driven design with thepresented methodology and framework.
keywords	CAE; FE Method; Metamodel; Object Model; PDM; Physical Behavior, System
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	c6ac
authors	Weber, M. and Partsch, G.
year	1999
title	A www based system for the support of construction processes
source	4th European Concurrent Engineering Conference (ECEC), Erlangen
summary	Building and construction processes rely heavily on an intense and timely cooperation between many participating partners. In this paper a computerbased support system is described which gives all participants their own customized view of the process. The system is based on standard world wide web technologies. In this way it has achieved wide exposure within only two years of being on-line. The functionality of Bau-CSCW especially in the planning phase of a generic design and construction workflow as well as the core technological concepts is described.
series	other
last changed	2003/04/23 15:50

_id	ca7b
authors	Howes, Jaki
year	1999
title	IT or not IT? An Examination of IT Use in an Experimental Multi-disciplinary Teamwork Situation
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 370-373
doi	https://doi.org/10.52842/conf.ecaade.1999.370
summary	Leeds Metropolitan University is well placed to carry out research into multi-disciplinary team-working, as all the design and construction disciplines are housed in one faculty. Staff have set up an experimental project, TIME IT (Team-working in Multi-disciplinary Environments using IT) which examines ways of working in the design/construction process and how IT is used when there is no commercial pressure. Four groups of four students, one graduate diploma architect, and one final year student from each of Civil Engineering, Construction Management and Quantity Surveying have been working on feasibility studies for projects that are based on completed schemes or have been devised by collaborators in the Construction Industry. Students have been asked to produce a PowerPoint presentation, in up to five working days, of a design scheme, with costs, structural analysis and construction programme. The students are not assessed on the quality of the product, but on their own ability to monitor the process and use of IT. Despite this, aggressive competition evolved between the teams to produce the 'best' design. Five projects were run in the 1998/99 session. A dedicated IT suite has been provided; each group of students had exclusive use of a machine. They were not told how to approach the projects nor when to use the available technology, but were asked to keep the use of paper to a minimum and to keep all their work on the server, so that it could be monitored externally. Not so. They plotted the AO drawings of an existing building that had been provided on the server. They like paper - they can scribble on it, fold it, tear it and throw it at one another.
keywords	IT, Multi-disciplinary, Teamwork
series	eCAADe
email
last changed	2022/06/07 07:50

_id	44c0
authors	Van Leeuwen, Jos P.
year	1999
title	Modelling architectural design information by features : an approach to dynamic product modelling for application in architectural design
source	Eindhoven University of Technology
summary	Architectural design, like many other human activities, benefits more and more from the ongoing development of information and communication technologies. The traditional paper documents for the representation and communication of design are now replaced by digital media. CAD systems have replaced the drawing board and knowledge systems are used to integrate expert knowledge in the design process. Product modelling is one of the most promising approaches in the developments of the last two decades, aiming in the architectural context at the representation and communication of the information related to a building in all its aspects and during its complete life-cycle. However, after studying both the characteristics of the product modelling approach and the characteristics of architectural design, it is concluded in this research project that product modelling does not suffice for support of architectural design. Architectural design is characterised mainly as a problem solving process, involving illdefined problems that require a very dynamic way of dealing with information that concerns both the problem and emerging solutions. Furthermore, architectural design is in many ways an evolutionary process. In short term this is because of the incremental approach to problem solving in design projects; and in long term because of the stylistic development of designers and the continuous developments in the building and construction industry in general. The requirements that are posed by architectural design are concentrated in the keywords extensibility and flexibility of the design informationmodels. Extensibility means that designers can extend conceptual models with definitions that best suit the design concepts they wish to utilise. Flexibility means that information in design models can be structured in a way that accurately represents the design rationale. This includes the modelling of incidental characteristics and relationships of the entities in the model that are not necessarily predefined in a conceptual model. In general, product modelling does not adequately support this dynamic nature of design. Therefore, this research project has studied the concepts developed in the technology of Feature-based modelling, which originates from the area of mechanical engineering. These concepts include the usage of Features as the primitives for defining and reasoning about a product. Features have an autonomous function in the information model, which, as a result, constitutes a flexible network of relationships between Features that are established during the design process. The definition of Features can be specified by designers to formalise new design concepts. This allows the design tools to be adapted to the specific needs of the individual designer, enlarging the library of available resources for design. In addition to these key-concepts in Feature-based modelling as it is developed in the mechanical engineering context, the project has determined the following principles for a Feature-based approach in the architectural context. Features in mechanical engineering are used mainly to describe the lowest level of detail in a product's design, namely the characteristics of its parts. In architecture the design process does not normally follow a strictly hierarchical approach and therefore requires that the building be modelled as a whole. This implies that multiple levels of abstraction are modelled and that Features are used to describe information at the various abstraction levels. Furthermore, architectural design involves concepts that are non-physical as well as physical; Features are to be used for modelling both kinds. The term Feature is defined in this research project to reflect the above key-concepts for this modelling approach. A Feature is an autonomous, coherent collection of information, with semantic meaning to a designer and possibly emerging during design, that is defined to formalise a design concept at any level of abstraction, either physical or non-physical, as part of a building model. Feature models are built up entirely of Features and are structured in the form of a directed graph. The nodes in the graph are the Features, whereas the arcs are the relationships between the Features. Features can be of user-defined types and incidental relationships can be added that are not defined at the typological level. An inventory in this project of what kind of information is involved in the practice of modelling architectural design is based on the analysis of a selection of sources of architectural design information. This inventory is deepened by a case study and results in the proposition of a categorisation of architectural Feature types.
keywords	Automated Management Information Systems; Computer Aided Architectural Design; Information Systems; Modelling
series	thesis:PhD
email
more	http://www.ds.arch.tue.nl/jos/thesis/
last changed	2003/02/12 22:37

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	edf5
authors	Arnold, J.A., Teicholz, P. and Kunz, J.
year	1999
title	An approach for the interoperation of web-distributed applications with a design model
source	Automation in Construction 8 (3) (1999) pp. 291-303
summary	This paper defines the data and inference requirements for the integration of analysis applications with a product model described by a CAD/CAE application. Application input conditions often require sets of complex data that may be considered views of a product model database. We introduce a method that is compatible with the STEP and PLIB product description standards to define an intermediate model that selects, extracts, and validates views of information from a product model to serve as input for an engineering CAD/CAE application. The intermediate model framework was built and tested in a software prototype, the Internet Broker for Engineering Services (IBES). The first research case for IBES integrates applications that specify certain components, for example pumps and valves, with a CAD/CAE application. This paper therefore explores a sub-set of the general problem of integrating product data semantics between various engineering applications. The IBES integration method provides support for a general set of services that effectively assist interpretation and validate information from a product model for an engineering purpose. Such methods can enable application interoperation for the automation of typical engineering tasks, such as component specification and procurement.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	a8f2
authors	Becker, R.
year	1999
title	Research and development needs for better implementation of the performance concept in building
source	Automation in Construction 8 (4) (1999) pp. 525-532
summary	Gaps in basic knowledge, inadequacies in the procedural infrastructure and lack of working tools, that still prevent a more systematic application of the performance concept throughout the building process, are identified. One of the main conclusions is that, despite the vast knowledge accumulated during the years in the fields of ergonometrics, human needs, human factor engineering, architectural design, structural analysis, building physics, building materials and durability analysis, this knowledge is not applied systematically during the building process. The situation is attributed to lack of tools for some of the decision making phases in the process, and to the lack of a common, preferably computerized, design platform that would ensure a comprehensive and quantitative approach to all the relevant performance attributes, link smoothly between the various phases along the project development, and minimizes bias caused by human experts.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	f51a
authors	Del Pup, Claudio
year	1999
title	Carbon Pencil, Brush and Mouse, Three Tools in the Learning Process of New University Art Designers
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 420-425
summary	This article develops the introduction of computer technologies in the fine arts environment the use of these new tools, sharing the process of creation and interacting at the same level with older technics, breaks the myth of technology and tries to reach the right place according to current or modern advances. As an introduction, it explains the insertion in the current courses of study of the "computer languages area", its implementation, present situation and future stages. An important point we have developed is the teaching methodology, to solve the transition of those who, challenging their investigations in different areas, like fire arts, graphic arts, film or video, need the support of computers. The first steps consist in designing sample courses, which allow the measurement of results, the definition of concepts like extension, capacities, teaching hours and the most important, a methodology to share the enthusiasm of creation with the difficulties of learning a new technique it is necessary to discover limits, to avoid easy results as a creative tool one of the most important problems we have faced is the necessity of coordinating the process of creation with the individual time of a plastic artist, finding the right way that allows the integration of all the group, minimizing desertion and losing of motivation. Two years later, the first results in the field of digital image investigations and assistance in form design. Volume as a challenge and solutions supported in techniques of modeling in 3D (experiences of modeling a virtual volume from a revolution profile, its particular facts and the parallelism with potter's lathe the handling of image as the most important element, as an work of art itself, but also as a support in the transmission of knowledge (design of a CD as a tool for the department of embryology of medical school with the participation of people from the medical school, engineering school and school of fine arts). Time as a variable, movement, animation and its techniques, multimedia (design of short videos for the 150th anniversary of the Republic University). Conclusions, good hits, adjustments, new areas to include, problems to solve, the way of facing a constantly evolving technology.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	125a
authors	Dikbas, Attila
year	1999
title	An Evaluating Model for the Usage of Web-based Information Technology in Computer Aided Architectural Design and Engineering Education
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 349-352
doi	https://doi.org/10.52842/conf.ecaade.1999.349
summary	New technologies often reshape expectations, needs and Opportunities so as to develop strategic Plans for the implementation of Information Techniques in education and research. The widespread acceptance of the internet and more specifically the World Wide Web (WWW) has raised the awareness of educators to the potential for online education, virtual classrooms and even virtual universities. With the advent of computer mediated communication, especially the widespread adoption of the web as a publishing medium, educators see the advantages and potential of delivering educational material over the Internet. The Web offers an excellent medium for content delivery with full text, colour graphics support and hyperlinks. The Purpose of this paper is to present a model for the usage of web-based information technology in computer aided architectural design and engineering education. It involves the key features of a full educational system that is capable of offering the teacher and the student flexibility with which to approach their teaching and learning tasks in ways most appropriate to the architectural design and engineering education. Web-based educational system aims at creating quality in on-line educational materials taking collaboration, support, new skills, and, most of all, time. The paper concludes with a discussion of the benefits of such an education system suggesting directions for further work needed to improve the quality of architectural design and engineering education.
keywords	Web-based Information Technology, Online Education, Virtual Campus, Computer Aided Architectural Design, Engineering Education
series	eCAADe
last changed	2022/06/07 07:55

_id	8c06
authors	Eastman, C.M.
year	1999
title	Building Product Models
source	CRC Press, NewYork
summary	Presents the concepts, technology, and methods used to develop a new, digital representation for architecture, civil engineering, and building construction. Eastman (architecture and computing, Georgia Institute of Technology) introduces and explains ISO-STEP and the Industry Foundation Classes, as well as reviewing modeling concepts, supporting technologies, and standards. He uses numerous examples and figures, making this book both accessible as a text for graduate students, and as a reference for professionals in the fields of real estate, building, and software development.
series	other
email
last changed	2003/04/23 15:14

_id	5007
authors	Elezkurtaj, Tomor and Franck, Georg
year	1999
title	Genetic Algorithms in Support of Creative Architectural Design
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 645-651
doi	https://doi.org/10.52842/conf.ecaade.1999.645
summary	The functions supported by commercial CAAD software are drawing, construction and presentation. Up to now few programs supporting the creative part of architectural problem solving have become available. The grand hopes of symbolic AI to program creative architectural design have been disappointing. In the meantime, methods called referred to as New AI have become available. Such methods includegenetic algorithms (GA). But GA, though successfully applied in other fields of engineering, still waits to be applied broadly in architectural design. A main problem lies in defining function in architecture. It is much harder to define the function of a building than that of a machine. Without specifying the function of the artifact, the fitness function of the design variants participating in the survival game of artificial evolution remains undetermined. It is impossible to fully specify the fitness function of architecture. The approach presented is one of circumventing a full specification through dividing labor between the GA software and its user. The fitness function of architectural ground plans is typically defined in terms only of the proportions of the room to be accommodated and certain topological relations between them. The rest is left to the human designer who interactively intervenes in the evolution game as displayed on the screen.
keywords	Genetic Algorithms, Creative Architectural Design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	993c
authors	Fruchter, Renate
year	1999
title	A/E/C Teamwork: A Collaborative Design and Learning Space
source	Journal of Computing in Civil Engineering -- October 1999 -- Volume 13, Issue 4, pp. 261-269
summary	This paper describes an ongoing effort focused on combined research and curriculum development for multidisciplinary, geographically distributed architecture/engineering/construction (A/E/C) teamwork. Itpresents a model for a distributed A/E/C learning environment and an Internet-based Web-mediated collaboration tool kit. The distributed learning environment includes six universities from Europe, Japan, andthe United States. The tool kit is aimed to assist team members and owners (1) capture and share knowledge and information related to a specific project; (2) navigate through the archived knowledge andinformation; and (3) evaluate and explain the product's performance. The A/E/C course offered at Stanford University acts as a testbed for cutting-edge information technologies and a forum to teach newgenerations of professionals how to team up with practitioners from other disciplines and take advantage of information technology to produce a better, faster, more economical product. The paper presents newassessment metrics to monitor students' cross-disciplinary learning experience and track programmatic changes. The paper concludes with challenges and quandaries regarding the impact of informationtechnologies on team performance and behavior.
series	journal paper
last changed	2003/05/15 21:45

_id	1f90
authors	Garcia, Renato
year	1999
title	PUSH: Generating Structural Form with Haptic Feedback
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 252-259
doi	https://doi.org/10.52842/conf.acadia.1999.252
summary	This paper looks into the use of haptic feedback (also known as force feedback) in helping generate and evolve structural forms, a process that is important to students of architecture and engineering. Force feedback provides these students with opportunities to “feel and manipulate” virtual 3D structures in a very natural and intuitive way. It also makes it possible to have real time holistic evaluation of structures in a qualitative rather than quantitative manner, something of particular importance to introductory-level students. Furthermore, the incorporation of force feedback into a highly interactive multimodal structural behavior application furnishes students not only with a means to observe virtual structures but also a tool to help generate and develop efficient, innovative and alternative ones. This also is of vital importance to students of architecture as they are often challenged to explore non-conventional forms. Implementing force feedback systems for these purposes need not necessarily require sophisticated and expensive VR hardware. This paper describes a structural behavior application called PUSH which utilizes a simple force feedback joystick connected a reasonably fast desktop computer.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	f371
authors	Hadjisophocleous, G.V. and Benichou, N.
year	1999
title	Performance criteria used in fire safety design
source	Automation in Construction 8 (4) (1999) pp. 489-501
summary	In many countries around the world, building codes are shifting from prescriptive- to performance-based for technical, economic, and social reasons. This move is made possible by progress in fire safety technologies, including the development of engineering tools that are required to implement performance codes. The development of performance-based codes follows a transparent, hierarchical structure in which there are usually three levels of objectives. The top level objectives usually state the functional requirements and the lowest level the performance criteria. Usually, one middle level exists, however, more levels can be used in this hierarchical structure depending on the complexity of the requirements. The success of performance-based codes depends on the ability to establish performance criteria that will be verifiable and enforceable. The performance criteria should be such that designers can easily demonstrate, using engineering tools, that their designs meet them and that the code authority can enforce them. This paper presents the performance criteria that are currently used by fire protection engineers in designing fire safety systems in buildings. These include deterministic and probabilistic design criteria as well as safety factors. The deterministic criteria relate mainly to life safety levels, fire growth and spread levels, fire exposure and structural performance. The probabilistic criteria focus on the incident severity and incident likelihood. Finally, the inclusion of safety factors permits a conservative design and allows for a smaller margin of error due to uncertainty in the models and the input data.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	04fd
authors	Karhu, V. and Lahdenpera, P.
year	1999
title	A formalised process model of current Finnish design and construction practice
source	The Int. Journal of Construction IT 7(1), pp. 51-71
summary	There is a need for improved co-ordination to enhance the performance of the building process. The process involves many parties and the communication and interfaces need special attention. Conventionally, the processes of parties are carried out independently, each discipline having its own activities and limits. As a precursor to improving the overall process, formal process modelling may be used to clarify the activities, information flows and the responsibilities of the different parties. The model presented in this paper divides the Finnish construction process into six main stages: briefing, programming, global design, detailed design, construction and hand-over. In developing the model, all these stages were covered - the main focus being on the functions and flows of the process since these were found to be the most critical in the development of the building procedures. The IDEF0 method was used as the modelling technique. It is shown how the developed reference model can be subjected to various view-dependent examinations and that the modelling approach supports process re-engineering and improvement efforts as well as a new means of building process management, especially when combined with modern computer-aided applications.
series	journal paper
last changed	2003/05/15 21:45

_id	687c
authors	Kosco, Igor
year	1999
title	How the World Became Smaller
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 230-237
doi	https://doi.org/10.52842/conf.ecaade.1999.230
summary	The world of computers became fruitful and independent before the new millennium started. New technologies and methods are giving us new tools and possibilities every day as well as the challenge how to use them. The advantage of architecture and namely of architects teaching at the universities or schools is remarkable: new techniques reflect the education, research and practice - and what is important - by one person. The links between practice and university from the point of view: how the computer technologies and CAAD influences methods of designing, managing and collaboration are very important in both directions. It grows with the number of students who left university with good computer skills on one side and number of architectural and engineering offices using computers on the other. Networks and Internet enables to exchange data but also experiences. Internet itself is not only a tool for surfing and enjoying or the source of information, but preferably like a powerful tool for collaboration, workgroups, virtual studios or long distance education. This paper describes experiences from research and educational projects between Slovak Technical University, IUG Grenoble, University of Newcastle and others and their influence on architectural education and practice.
keywords	Long-Distance Education, Research, Practice
series	eCAADe
email
last changed	2022/06/07 07:51

_id	c36d
authors	Mahdavi, A.
year	1999
title	A comprehensive computational environment for performance based reasoning in building design and evaluation
source	Automation in Construction 8 (4) (1999) pp. 427-435
summary	This paper introduces a comprehensive computational implementation effort toward the incorporation of simulation-based performance evaluation in building design. Specifically, the computational design support system `SEMPER' will be described. SEMPER's main objectives are: (i) a methodologically consistent (first-principles-based) and flexible performance modeling approach through the entire building design and engineering process; (ii) provision of comprehensive, i.e., multi-domain building performance evaluation support; (iii) seamless and dynamic communication between the simulation model and the general building representation in an object-oriented space-based design environment; and (iv) active convergence support via a bi-directional inference mechanism that provides not only the conventional design-to-performance mapping option but also a `preference-based' performance-to-design mapping technology.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	6810
authors	Makkonen, Petri
year	1999
title	On multi body systems simulation in product design
source	KTH Stockholm
summary	The aim of this thesis is to provide a basis for efficient modelling and software use in simulation driven product development. The capabilities of modern commercial computer software for design are analysed experimentally and qualitatively. An integrated simulation model for design of mechanical systems, based on four different "simulation views" is proposed: An integrated CAE (Computer Aided Engineering) model using Solid Geometry (CAD), Finite Element Modelling (FEM), Multi Body Systems Modelling (MBS) and Dynamic System Simulation utilising Block System Modelling tools is presented. A theoretical design process model for simulation driven design based on the theory of product chromosome is introduced. This thesis comprises a summary and six papers. Paper A presents the general framework and a distributed model for simulation based on CAD, FEM, MBS and Block Systems modelling. Paper B outlines a framework to integrate all these models into MBS simulation for performance prediction and optimisation of mechanical systems, using a modular approach. This methodology has been applied to design of industrial robots of parallel robot type. During the development process, from concept design to detail design, models have been refined from kinematic to dynamic and to elastodynamic models, finally including joint backlash. A method for analysing the kinematic Jacobian by using MBS simulation is presented. Motor torque requirements are studied by varying major robot geometry parameters, in dimensionless form for generality. The robot TCP (Tool Center Point) path in time space, predicted from elastodynamic model simulations, has been transformed to the frequency space by Fourier analysis. By comparison of this result with linear (modal) eigen frequency analysis from the elastodynamic MBS model, internal model validation is obtained. Paper C presents a study of joint backlash. An impact model for joint clearance, utilised in paper B, has been developed and compared to a simplified spring-damper model. The impact model was found to predict contact loss over a wider range of rotational speed than the spring-damper model. Increased joint bearing stiffness was found to widen the speed region of chaotic behaviour, due to loss of contact, while increased damping will reduce the chaotic range. The impact model was found to have stable under- and overcritical speed ranges, around the loss of contact region. The undercritical limit depends on the gravitational load on the clearance joint. Papers D and E give examples of the distributed simulation model approach proposed in paper A. Paper D presents simulation and optimisation of linear servo drives for a 3-axis gantry robot, using block systems modelling. The specified kinematic behaviour is simulated with multi body modelling, while drive systems and control system are modelled using a block system model for each drive. The block system model has been used for optimisation of the transmission and motor selection. Paper E presents an approach for re-using CAD geometry for multi body modelling of a rock drilling rig boom. Paper F presents synthesis methods for mechanical systems. Joint and part number synthesis is performed using the Grübler and Euler equations. The synthesis is continued by applying the theory of generative grammar, from which the grammatical rules of planar mechanisms have been formulated. An example of topological synthesis of mechanisms utilising this grammar is presented. Finally, dimensional synthesis of the mechanism is carried out by utilising non-linear programming with addition of a penalty function to avoid singularities.
keywords	Simulation; Optimisation; Control Systems; Computer Aided Engineering; Multi Body Systems; Finite Element Method; Backslash; Clearance; Industrial Robots; Parallel Robots
series	thesis:PhD
last changed	2003/02/12 22:37

For more results click below: