Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 628

Reformat results as: short short into frame detailed detailed into frame

_id	2690
authors	Chiu, Mao-Lin
year	1999
title	Design Navigation and Construction Simulation by Virtual Reality
doi	https://doi.org/10.52842/conf.caadria.1999.031
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 31-41
summary	This paper depicts the approach of constructing a virtual reality environment for simulating architectural design and construction operations. The virtual environment is established to demonstrate the spatial performance of design and constructability of construction operations. Particularly, the functions such as navigation of construction sites, simulation of construction operations, and evaluation of construction details will be critical to construction operations. The system shell is implemented by JAVA on the web and integrated with VRML for supporting the above functions. The study focuses on the needs for the system integration and interface design. Four modes of human computer interfaces are proposed, including the user, agent, monitor, and immersion modes. Finally, this paper provides demonstration of construction simulation in an office building project to highlight the above discussion. The operations of crane towers and curtain wall installation are also studied in the construction process. In conclusion, this paper demonstrates the potential uses and limitation of virtual reality in simulation of the built environment.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	22b7
authors	Donath, D. and Regenbrecht, H.
year	1999
title	Der Bleistift im 21. Jahrhundert. Das architektonische Entwerfen in interaktiven VR Umgebungen. (The pencil in the 21th century. The architectural design process in Virtual Environments)
source	IAO Forum Architektur im Informationszeitalter, FhG Stuttgart, 21.-22.4.1999, proceedings, chapter 7, 10 p.
summary	In the very young discipline of Virtual Reality Applications only a few reports are available about using this technology for periods longer than in experimental setups. This paper describes experiences made during five years of usage of Virtual Reality (VR) in educational training for architects. About 100 different people were working with our systems during this period. Three programs were developed at Bauhaus University with the aim of teaching architectural students to design in three-dimesional environments. The first program called voxDesign is based on the metaphor of voxels. The second program, planeDesign, uses rectangualar planes to describe room-like situations. An other program vram for the user orientated description of flexible and own interfaces and environments is current under construction, a first verson is presented at the international computer exhibition ìCeBitî in 1999. All programs force the users to design in a 1:1 scale, that means that the design and the feedback actions are coupled in an embodied way. A real walking metaphor is used for navigation. The experiences made by users are explained too.
keywords	Virtual Reality, Interaction, Human Computer Interfaces, Digital Media
series	other
email
last changed	2003/02/26 18:58

_id	fd35
authors	Donath, Dirk
year	1999
title	Using Immersive Virtual Reality Systems for Spatial Design in Architecture
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 307-318
summary	In the very young discipline of Virtual Reality Applications only a few reports are available about using this technology for periods longer than in experimental setups. This paper describes experiences made during four years of usage of Virtual Reality (VR) in educational training for architects. About 100 different people were working with our systems during this period. Two programs were developed at Bauhaus University with the aim of teaching students in architecture in three-dimensional sketching. An other program for free and own interfaces and environments is currently under construction and will be presented at the international computer fair "CeBit" in 1999. The first program called voxDesign is based on the metaphor of voxels. The second program, planeDesign, uses rectangualar planes to describe room-like situations. All programs force the users to design in a 1:1 scale, which means that the design and the feedback actions are coupled in an embodied way. A real walking metaphor is used for navigation. The experiences made by the students are explained too.
keywords	Virtual Reality, Architecture, Design, Design Support Systems, Interaction, Research, Education, Usability, Human Computer Interfaces
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	5222
authors	Moloney, Jules
year	1999
title	Bike-R: Virtual Reality for the Financially Challenged
doi	https://doi.org/10.52842/conf.ecaade.1999.410
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 410-413
summary	This paper describes a 'low tech' approach to producing interactive virtual environments for the evaluation of design proposals. The aim was to produce a low cost alternative to such expensive installations as CAVE virtual reality systems. The system utilises a library of pre-rendered animation, video and audio files and hence is not reliant on powerful hardware to produce real time simulation. The participant sits astride a bicycle exercise machine and animation is triggered by the pedal revolution. Navigation is achieved by steering along and around the streets of the animated design. This project builds on the work of Desmond Hii. ( Hii, 1997) The innovations are the bicycle interface and the application to urban scale simulation.
keywords	Virtual, Design, Interface, Urban
series	eCAADe
email
last changed	2022/06/07 07:58

_id	53a4
authors	Vélez Jahn, Gonzalo
year	1999
title	The MUMOVIAR (Museum for Modeling Virtual Architecture) - A Proposal for a Research Theme (The Mumoviar (For Museum Virtual Modeling Architecture) - to for Proposal to Research Theme)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 379-383
summary	One of the most interesting areas in the forefront of non-immersive virtual reality (VRML) applications to architecture is the one that concerns the design, construction and exploration of on-line multi-access worlds using the Internet-WWW. However, and despite the great proliferation of earlier single-access models built on VRML, attempts to collect, classify and provide accesibility that type of models has proved almost nil. On the other side, one of the architectural typologies that promises the greatest transformation potential in the virtual architecture area in cyberspace is the one that concerns virtual museums and galleries. This paper seeks to provide a bridge between the two aforementioned approaches by formulating a conceptual basis for the creation of a virtual, on-line, multi-access museum intended to house collections of VRML building models. Such models, initially shown at a conventional model scale, would be accessed by visitors through an interface intended to transport those visitors into the models’ environments, where changes in scale could provide navigation access to interior and exterior view of the building . Accordingly, the museum would act as a sort of "spaceport” toward different routes of exploration. This modelistic cascading seems to offer interesting possibilities as regards future virtual architecture applications.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	9cf4
authors	Chan, C., Hill, L. and Cruz-Neira, C.
year	1999
title	Is it Possible to Design in Full Scale? A CAD Tool in a Synthetic Environment
doi	https://doi.org/10.52842/conf.caadria.1999.043
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 43-52
summary	This project developed a Virtual Architectural Design Tool (VADeT) executed in the C2 Virtual Reality (VR) space. C2 is a synthetic CAVE environment providing a full-scale setting for image projection and perception. Applying this tool for design offers four advantages over other CAD systems. First, it enables navigation performing in full scale to create the sense of immersion and reflection of the seeing-as. Second, it allows the creation, modification, and editing of three-dimensional objects in a virtual space. Third, designs can be modified and viewed simultaneously inside or outside of the generated model to obtain the best design products. Fourth, the entire design process can be recorded and played back. Collectively, this tool serves the purposes of: (1) a three-dimensional sketching tool for manipulating 3-D objects, (2) a design study tool for transparently displaying the design processes, and (3) a design teaching tool to demonstrate the processes by which designers do design. Thus, design in a full-scale representation not only is possible but also is a new and unconventional mode that will heavily influence design thinking.
series	CAADRIA
last changed	2022/06/07 07:56

_id	69f5
authors	Chan, C., Maves, J. and Cruz-Neira, C.
year	1999
title	An Electronic Library for Teaching Architectural History
doi	https://doi.org/10.52842/conf.caadria.1999.335
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 335-344
summary	This research project developed an electronic library of significant buildings chosen to represent seven selected periods of Western architectural history: Egyptian (Mortuary temple of Queen Hatshepsut), Greek (Parthenon), Roman (Pantheon), Romanesque (Speyer Cathedral), Gothic (Notre Dame Cathedral), Renaissance (Tempietto), and Modern (Des Moines Art Center). All buildings were reconstructed in their original or intended forms based on plans, drawings, photographs, and historical texts. Two products were generated by this project: (1) materials to be displayed on the World Wide Web, including rendered still images for perception, movies for a visual guide, and Virtual Reality Modeling Language (VRML) models for user navigation; and (2) virtual reality (VR) models to be displayed in the C2 (an improved version of the Cave Automatic Virtual Environment or CAVE facility). The benefits of these VR models displayed on the Web and in the C2 are their easy accessibility at any time from various geographic locations and the immersive experience that enhances viewersÌ understanding of the effects of spatial proportions on form and of colors on materials.
series	CAADRIA
more	http://archvr.design.iastate.edu/miller
last changed	2022/06/07 07:56

_id	9cab
authors	Coomans, M.K.D.
year	1999
title	A Virtual Reality User Interface for a Design Information System, CCAI: the Journal for the Integrated Study of Artificial Intelligence
source	Cognitive Science and Applied Epistemology, Rijks Universiteit Gent
summary	The computer is a tool, a complex artefact that is used to extend our reach. A computer system can provide several kinds of services, but against these services stands a supplementary task that the user must deal with: the communication with the computer system. We argued that Virtual Reality (VR) can fundamentally improve the user interface by rendering on the common experiential skills of all users. We present the theoretical basis for this, referring to Donald Norman's theory. We show that VR provides at least theoretically, the means to take a big step in the direction of an ideal user interface. As an example of a innovative application of VR in user interface design, we presented the VR-DIS system; an interdisciplinary design system for the building and construction industry. We discuss the issues underlying the design of its VR interface.
series	other
last changed	2003/04/23 15:50

_id	b0c3
authors	Flanagan, Robert
year	1999
title	Designing by Simulation
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 25-30
summary	This article evaluates ‘simulation’ as a contributing factor in architectural design. While computers enhance simulation, they have yet to transform the art of architecture. A partial explanation is found at the extremes of design processes: Gaudí’s Sagrada Família Cathedral of Barcelona is an empiricist’s culminating achievement -- faith expressed in stone. By contrast, SOM’s Sear’s Tower of Chicago is the modernist monument to rational process -- (financial) faith engineered in steel and glass. Gaudí employed an understanding of the heritage of stone and masonry to fashion his design while SOM used precise relationships of mathematics and steel. However, the designs in both the Sear’s Tower and Sagrada Família are restricted by the solutions inherent in the methods. In contrast, student designs often have no inherent approach to building. While the solution may appear to be evident, the method must often be invented; this is potentially more costly and complex than the design itself. This issue is not new to computers, but its hyper--reality is potentially more complex and disruptive. In evaluating the role of computer simulation in architectural design, this article employs two methods: 1.) Exoskeletal design: A limited collection of connected plates is formed and designed through warping, bending and forming. Reference architect Buckminster Fuller. 2.) Endoskeletal design: Curtain wall construction is taken to its minimalist extreme, using pure structure and membrane. Reference artist Christo.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	1a3d
authors	Willey, David
year	1999
title	Sketchpad to 2000: From Computer Systems to Digital Environments
doi	https://doi.org/10.52842/conf.ecaade.1999.526
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 526-532
summary	It can be argued that over the last thirty five years computer aided architectural design (CAAD) has made little impact in terms of aiding design. The paper provides a broadbrush review of the last 35 years of CAAD research and suggests that the SKETCHPAD notion that has dominated CAAD since 1963 is now a flawed concept. Then the discipline was replete with Modernist concepts of optimal solutions, objective design criteria and universal design standards. Now CAD needs to proceed on the basis of the Post Modern ways of thinking and designing opened up by digital techniques - the Internet, multimedia, virtual reality, electronic games, distance learning. Computers facilitate information flow and storage. In the late seventies and eighties the CAAD research community's response to the difficulties it had identified with the construction of integrated digital building models was to attempt to improve the intelligence of the computer systems to better match the understanding of designers. Now it is clear that the future could easily lie with CAAD systems that have almost no intelligence and make no attempt to aid the designer. Communication is much more central to designing than computing.
keywords	History, Intelligence, Interface, Sketchpad, Web
series	eCAADe
email
last changed	2022/06/07 07:56

_id	e719
authors	Achten, Henri and Turksma, Arthur
year	1999
title	Virtual Reality in Early Design: the Design Studio Experiences
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 327-335
summary	The Design Systems group of the Eindhoven University of Technology started a new kind of design studio teaching. With the use of high-end equipment, students use Virtual Reality from the very start of the design process. Virtual Reality technology up to now was primarily used for giving presentations. We use the same technology in the design process itself by means of reducing the time span in which one gets results in Virtual Reality. The method is based on a very brief cycle of modelling in AutoCAD, assigning materials in 3DStudio Viz, and then making a walkthrough in Virtual Reality in a standard landscape. Due to this cycle, which takes about 15 seconds, the student gets immediate feedback on design decisions which facilitates evaluation of the design in three dimensions much faster than usual. Usually the learning curve of this kind of software is quite steep, but with the use of templates the number of required steps to achieve results is reduced significantly. In this way, the potential of Virtual Reality is not only explored in research projects, but also in education. This paper discusses the general set-up of the design studio and shows how, via short workshops, students acquire knowledge of the cycle in a short time. The paper focuses on the added value of using Virtual Reality technology in this manner: improved spatial reasoning, translation from two-dimensional to three-dimensional representations, and VR feedback on design decisions. It discusses the needs for new design representations in this design environment, and shows how fast feedback in Virtual Reality can improve the spatial design at an early stage of the design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	6d88
authors	Achten, Henri H. and Van Leeuwen, Jos P.
year	1999
title	Feature-Based High Level Design Tools - A Classification
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 275-290
summary	The VR-DIS project aims to provide design support in the early design stage using a Virtual Reality environment. The initial brief of the design system is based on an analysis of a design case. The paper describes the process of analysis and extraction of design knowledge and design concepts in terms of Features. It is demonstrated how the analysis has lead to a classification of design concepts. This classification forms one of the main specifications for the VR-based design aid system that is being developed in the VR-DIS programme. The paper concludes by discussing the particular approach used in the case analysis and discusses future work in the VR-DIS research programme.
keywords	Features, Feature-Based modelling, Architectural Design, Design Process, Design Support
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	4d95
authors	Alvarado, Rodrigo Garcia and Maver, Tom
year	1999
title	Virtual Reality in Architectural Education: Defining Possibilities
doi	https://doi.org/10.52842/conf.acadia.1999.007
source	ACADIA Quarterly, vol. 18, no. 4, pp. 7-9
summary	Introduction: virtual reality in architecture Virtual Reality (VR) is an emergent computer technology for full 3D-simulations, which has a natural application in the architectural work, due that activity involves the complete definition of buildings prior to its construction. Although the profession has a long tradition and expertise in the use of 2D-plans for the design of buildings, the increasing complexity of projects and social participation requires better media of representation. However, the technological promise of Virtual Reality involves many sophisticated software and hardware developments. It is based on techniques of 3D-modelling currently incorporated in the majority of drawing software used in architecture, and also there are several tools for rendering, animation and panoramic views, which provide visual realism. But other capabilities like interactivity and sense of immersion are still complex, expensive and under research. These require stereoscopic helmets, 3D pointers and trackers with complicated configurations and uncomfortable use. Most advanced installations of Virtual-Reality like CAVEs involve much hardware, building space and restrictions for users. Nevertheless, diverse developers are working in Virtual-Reality user-friendly techniques and there are many initial experiences of architectural walk-throughs showing advantages in the communication and development of designs. Then we may expect an increasing use of Virtual Reality in architecture.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	93a8
authors	Anders, P.
year	1999
title	Envisioning Cyberspace: Designing 3D Electronic Spaces
source	McGraw-Hill, NY
summary	Free of the constraints of physical form and limited only by imagination, new environments spring to life daily in a fantastic realm called cyberspace. The creators of this new virtual world may be programmers, designers, architects, even children. In this invigorating exploration of the juncture between cyberspace and the physical world, architect Peter Anders brings together leading-edge cyberspace art and architecture ... inspiring new techniques and technologies ... unexpected unions of reality and virtuality ... and visions of challenges and opportunities as yet unexplored. More than an invitation to tour fantastic realms and examine powerful tools, this book is a hard-eyed look at cyberspace's impact on physical, cultural, and social reality, and the human-centered principles of its design. This is a book that will set designers and architects thinkingNand a work of importance to anyone fascinated with the fast-closing space between the real and the virtual.
series	other
email
last changed	2003/04/23 15:14

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	4989
authors	Clayton, M.J., Teicholz, P., Fischer, M. and Kunz, J.
year	1999
title	Virtual components consisting of form, function and behavior
source	Automation in Construction 8 (3) (1999) pp. 351-367
summary	Software can produce a product model of a building as a consequence of the designers' actions in drawing and evaluating the design. The actions of the designer include interpreting, predicting and assessing the emerging design and describe the building in terms of forms, functions and behaviors. A software prototype has been implemented that incorporates this understanding of the design process in the field of building design. It employs object-oriented classes to represent forms, functions and behaviors. As a software user draws and interprets the design for multiple evaluation issues, the software creates a unique `virtual component' for each entity. During automated reasoning to evaluate the emerging design, virtual components collect and organize form, function and behavior instances to describe the parts of the building. In comparison to other product models, our approach, which we refer to as a `Virtual Product Model', better accommodates change, provides increased support for the design process and enriches the product representation by including function and behavior.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	b78f
authors	Clayton, M.J., Warden, Robert B., Parker, Th.W.
year	1999
title	Virtual Construction of Architecture Using 3D CAD and Simulation
doi	https://doi.org/10.52842/conf.acadia.1999.316
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 316-324
summary	3D modeling and computer simulations provide new ways for architecture students to study the relationship between the design and construction of buildings. Digital media help to integrate and expand the content of courses in drafting, construction and design. This paper describes computer-based exercises that intensify the students’ experience of construction in several courses from sophomore to senior level. The courses integrate content from drafting and design communication, construction, CAD, and design. Several techniques are used to strengthen students’ awareness and ability in construction. These include: · Virtual design - build projects in which students construct 3D CAD models that include all elements that are used in construction. · Virtual office in which several students must collaborate under the supervision of a student acting as project architect to create a 3D CAD model and design development documents. · Virtual sub-contracting in which each student builds a trade specific 3D CAD model of a building and all of the trade specific models must be combined into a single model. · Construction simulations (4D CAD) in which students build 3D CAD models showing all components and then animate them to illustrate the assembly process. · Cost estimating using spreadsheets. These techniques are applied and reapplied at several points in the curriculum in both technical laboratory courses and design studios. This paper compares virtual construction methods to physical design – build projects and provides our pedagogical arguments for the use of digital media for understanding construction.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	11f2
authors	Dalholm, E., Rydberg-Mitchell, B., Davies, R. and Warrén, P.
year	1999
title	THE EXPERIENCE OF SPACE IN FULL-SCALE MODELS AND VIRTUAL REALITY
source	Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 67-74
summary	Do we experience the size and character of virtual spaces in the same way as real spaces? What impact has the meaning of a space, i.e. furniture and other clues to the use of a space, on our experience of it? This paper describes an experiment where the participants could navigate through a room, first on desktop-VR, then in full-scale VR (in a CAVE) and finally in a full-scale model. In a first phase the room was empty and only defined through walls, windows and doors. Later on furniture was added as well as colors and textures. The experiment was a pilot study and threw light on some questions which we intend to develop in further investigations. It showed that the participants used building components like doors and windows and furniture in the presentation on desktop VR for their estimation of the size of the room. In the CAVE and in the full-scale model the participants' bodies were the measure for their estimations. The experiment also hinted at that color and texture had an impact on the experience of size.
keywords	VR, CAVE, Full-scale Modeling, Design Tool, 3D-Modeling, Participatory Design, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:27

_id	837b
authors	Elger, Dietrich and Russell, Peter
year	2000
title	Using the World Wide Web as a Communication and Presentation Forum for Students of Architecture
doi	https://doi.org/10.52842/conf.ecaade.2000.061
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 61-64
summary	Since 1997, the Institute for Industrial Building Production (ifib) has been carrying out upper level design studios under the framework of the Netzentwurf or Net-Studio. The Netzentwurf is categorized as a virtual design studio in that the environment for presentation, criticism and communication is web based. This allows lessons learned from research into Computer Supported Cooperative Work (CSCW) to be adapted to the special conditions indigenous to the architectural design studio. Indeed, an aim of the Netzentwurf is the creation and evolution of a design studio planing platform. In the Winter semester 1999-2000, ifib again carried out two Netzentwurf studios. involving approximately 30 students from the Faculty of Architecture, University of Karlsruhe. The projects differed from previous net studios in that both studios encompassed an inter-university character in addition to the established framework of the Netzentwurf. The first project, the re-use of Fort Kleber in Wolfisheim by Strasbourg, was carried out as part of the Virtual Upperrhine University of Architecture (VuuA) involving over 140 students from various disciplines in six institutions from five universities in France, Switzerland and Germany. The second project, entitled "Future, Inc.", involved the design of an office building for a scenario 20 years hence. This project was carried out in parallel with the Technical University Cottbus using the same methodology and program for two separate building sites.
keywords	Virtual Design Studios, Architectural Graphics, Presentation Techniques
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

For more results click below: