Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 629

Reformat results as: short short into frame detailed detailed into frame

_id	2c1d
authors	Castañé, D., Tessier, C., Álvarez, J. and Deho, C.
year	1999
title	Patterns for Volumetric Recognition - Guidelines for the Creation of 3D-Models
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 171-175
summary	This piece proposes new strategies and pedagogic methodologies applied to the recognition and study of the subjacent measurements of the architectural projects to be created. This proposal is the product of pedagogic experience, which stems from this instructional team of the department of tri-dimensional models of electronic models. This program constitutes an elective track for the architectural major at the college of architecture, design, and urbanism of the University of Buenos Aires and housed at the CAO center. One of the requirements that the students must complete, after doing research and analytical experimentation through the knowledge that they acquired through this course, is to practice the attained skills through exercises proposed by the department in this case, the student would be required to virtually rebuild a paradigmatic architectonic piece of several sample architects. Usually at this point, students experience some difficulties when they analyze the existing documents on the plants, views, picture, details, texts, etc., That they have obtained from magazines, books, and other sources. Afterwards, when they digitally begin to generate basic measurements of the architectural work to be modeled, they realize that there are great limitations in the comprehension of the tri-dimensional understanding of the work. This issue has brought us to investigate and develop proposals of volumetric understanding of patterns through examples of work already analyzed and digitalized tri-dimensionally in the department. Through a careful study of the existent documentation for that particular work, it is evaluated which would be the paths and basis to adopt through utilizing alternative technologies to arrive at a clear reconstruction of the projected architectural work, the study gets completed by implementing the proposal at the internet site http://www.datarq.fadu.uba.ar/catedra/dorcas
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	85ab
authors	Corrao, Rossella and Fulantelli, Giovanni
year	1999
title	Architects in the Information Society: The Role of New Technologies
doi	https://doi.org/10.52842/conf.ecaade.1999.665
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 665-671
summary	New Technologies (NTs) offer us tools with which to deal with the new challenges that a changing society or workplace presents. In particular, new design strategies and approaches are required by the emerging Information Society, and NTs offer effective solutions to the designers in the different stages of their professional life, and in different working situations. In this paper some meaningful scenarios of the use of the NTs in Architecture and Urban Design are introduced; the scenarios have been selected in order to understand how the role of architects in the Information Society is changing, and what new opportunities NTs offer them. It will be underlined how the telematic networks play an essential role in the activation of virtual studios that are able to compete in an increasingly global market; examples will be given of the use of the Web to support activities related to Urban Planning and Management; it will be shown how the Internet may be used to access strategic resources for education and training, and sustain lifelong learning. The aforesaid considerations derive from a Web-Based Instruction system we have developed to support University students in the definition of projects that can concern either single buildings or whole parts of a city. The system can easily be adopted in the other scenarios introduced.
keywords	Architecture, Urban Planning , New Technologies, World Wide Web, Education
series	eCAADe
email
last changed	2022/06/07 07:56

_id	6126
authors	De Grassi, M., Giretti A. and Pinese, P.
year	1999
title	Knowledge Structures of Episodic Memory in Architectural Design: An Example of Protocol Analysis
doi	https://doi.org/10.52842/conf.ecaade.1999.576
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 576-583
summary	The Protocol Analysis of the design process is a very recent and very promising research field. It is believed that good application-oriented developments are possible mainly in the tutorial field (ITS). The research conducted up to now has primarily dealt with the study of the design process. On the contrary, we propose an investigation experiment on the knowledge structures relative to the use of the episodic memory in the architectural design. The proposed experiment concerns the monitoring of the cognitive processes utilised by tutors and students in a brief, but yet complete design session. The results have lead to a synthetic model (computational model) of the adopted knowledge structures, and to a complete index system oriented and organised according to semantic fields. The application of the synthetic model to the design process analysis of students and tutors enabled the definition of the different utilisation strategies of episodic memory to be defined. The results obtained will make up the structure of a tutorial program for the architectural design.
keywords	Intelligent Tutoring Systems (ITSs), Architectural Design Education, Case Based Reasoning, Protocol Analisys, Design Cognition
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2145
authors	Engeli, Maia and Mueller Andre
year	1999
title	Digital Environments for Learning and Collaboration Architecture, Communication, Creativity, Media and Design Process
doi	https://doi.org/10.52842/conf.acadia.1999.040
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 40-52
summary	Digital networks are gaining importance as environments for learning and creative collaboration. Technical achievements, software enhancements, and a growing number of applicable principles make it possible to compile complex environments that satisfy many aspects necessary for creative collaboration. This paper focuses on three issues: the architecture of collaborative environments, communication in these environments and the processes inherent to creative collaboration. The information architecture of digital environments looks different from physical architecture, mainly because the material that it is made out of is information and not stone, wood or metal and the goal is to pro-vide appropriate paths and views to information. Nonetheless, many analogies can be drawn between information architecture and physical architecture, including the need for useability, aesthetics, and consistency. To communicate is important for creative collaboration. Digital networks request and enable new strategies for communicating. Regarding the collaborative creative process we have been able to detect principles and features that enhance this process, but there are still many unanswered questions. For example, the environment can enable and improve the frequency of surprise and coincidence, two factors that often play decisive roles in the creative processes but cannot be planned for in advance. Freedom and transparency within the environment are other important factors that foster creative collaboration. The following findings are based on numerous courses, which we have taught using networked environments and some associated, research projects that helped to verify their applicability for architectural practice.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	c21a
authors	Fitzsimons, J. Kent
year	1999
title	Net-Based History of Architecture
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 319-325
summary	History sequences in professional architecture programs must meet broad educational objectives. Inherent in an architect’s education is a tension between the rigorous consideration of important ideas in the history of architecture and the inspired implementation of these ideas in the design studio. A digital history course can bridge the education/training divide by making the study of history emulate the methods and strategies used in the architecture studio. Using a relational database and navigation software, we have developed a course in which students move through a digital environment of text, image, audio and video resources pertaining to broad historical categories in architecture. Charged with producing historical genealogies, students must incorporate current architectural and cultural concerns in their distillation of the history presented by the articles, surveys, manifestoes, photographs, drawings and interviews encountered online. The immersive multimedia environment uses hyperlinks as a structure, placing emphasis on the student’s role in navigation while increasing the possibilities for chance encounters in the material. The delivery of basic material having been accomplished independently by the student, class meetings are used for higher-level discussions of the issues that surface. The project is currently being implemented as a half-semester course in 20th century architecture for a small group of sophomore students in the professional Bachelor of Architecture program. The project’s pedagogical and technical aspects will be discussed with respect to this stage of its development.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	b9d3
authors	Galán, B., Argumedo, C. and Paganini, A.
year	1999
title	Possibilities of the Computer for the Simulation of the Designer's Constructive Strategies
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 74-78
summary	The dynamic analysis (prospective), of products and systems, it is a methodological resource of the design that allows synthetically, and with great economy of investigation resources and time, to put in evidence the tendencies in the evolution of the object. Finally, the design strategies are defined as postures in front of these tendencies of evolution of the significant variables in the cycle of the product. Having as theoretical context the theory of systems,we explored the dynamic analysis of products and systems, taking their evolution along a temporary series that embraces a complete cycle, from the birth of the object until their maturation in the period of saturation of the market. Starting from the analysis of the evolution of the diverse subsystems, and the conflicts among the world of the necessities, (as pressure exercised from the context), and the technical agreement, it shows the evolutionary dynamics,the underlying conflicts to the logic of the system for each product. They are revealed to the design like a cultural operation that should keep in mind the processes of transformation of the mental representations of the object whose evolution should respect certain rules for its as, clearly such as the well-known maya threshold, (most advanced, yet accepted).
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2005_799
id	sigradi2005_799
authors	Gonzalo, Guillermo E.; Sara L. Ledesma, V.M. Nota, C.F. Martínez, G.I. Quiñones y G. Márquez Vega.
year	2005
title	Methodology for the bioclimatic design: computer sustain for election of guidelines and strategies.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 799-805
summary	After numerous studies and practical of use, field and laboratory measurements, carried out among the years 1994 and 1999, we arrived to the elaboration and presentation of a methodology for the bioclimatic design and energetically sustainable that already takes two books publications. With the support of more than 600 figures that facilitate the understanding of the concepts explained in the books and 26 computer software and databases, that are attached to the second book, the work is facilitated so that designers of buildings that have not been never in contact with a certain climate, or that they don’t have sufficiently assumed by means of the observation of the particularities of a certain climatic situation, to understand the form in that the climate influence their design, condition or determine the design solutions and averge strategies that will choose when carrying out an architecture work. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	1873
authors	Ji, Guohua and Feng, Jinlong
year	1999
title	Structural Approach to the Organization of Information: A Teaching Experiment at SEU
doi	https://doi.org/10.52842/conf.caadria.1999.153
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 153-159
summary	Design studio still plays a very important role in architectural design education today since teachers and students can exchange their thinking directly. In the whole teaching/learning process, there are a lot of information to be exchanged between the teachers and the students. How to organize the information and record the whole teaching/learning process is very interesting to us. The increasing use of CAD raises some problems with its advantages when the amount of compute-files becomes very big and they are in different formats. In the third year design studio teaching in the academic year 1998/99 at Department of Architecture in Southeast University, we try to use WWW techniques and features to organise the design information. We try to integrate the teaching programme, the project information, the reference material and the students' work together, to record and monitor the teaching process. Since the teaching programme is clearly organised, we could use some strategies and ideas to control the organisation of file storage and presentation. It creates the basis for the further development of applying network to aid the studio teaching.
series	CAADRIA
last changed	2022/06/07 07:52

_id	7083
authors	Johnson, Brian and Kolarevic, Branko
year	1999
title	EVAL: A Web-based Design Review System
doi	https://doi.org/10.52842/conf.acadia.1999.030
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 30-39
summary	The Association for Computer Aided Design in Architecture (ACADIA) recently conducted a design competition in which design projects were presented using web sites. As a consequence it was not necessary to co-locate reviewers in order to view submissions. Since the proposals took the form of web sites, it seemed appropriate to use the web as the medium for conducting the review. The review thus became an opportunity to explore online design studio review strategies as well as competition issues. As there were over 600 entries in the competition, each of which was to be reviewed by at least three reviewers, the review process presented certain logistical challenges that might not pertain to a "normal" design studio. Using a globally-distributed review panel and jury meant that synchronous review of projects would not be possible, and that face-to-face interaction between jurors would be lost. This paper describes the review system which was developed to address this need. It also profiles the conduct of the review itself, and offers some observations about performance, ergonomics and related design issues for future efforts.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	0d5b
authors	Latch Craig, David and Zimring, Craig
year	1999
title	Practical Support for Collaborative Design Involving Divided Interests
doi	https://doi.org/10.52842/conf.acadia.1999.126
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 126-137
summary	Collaboration is common in design, yet relatively little is known about the cognitive reasoning processes that occur during collaboration. This paper discusses collaborative design, emphasizing the elaboration and transformations of the problem search space, and the roles that unstructured verbal communication and graphic communication can play in these processes. The paper discusses a prototype system called the Immersive Discussion Tool (IDT) that supports asynchronous design. IDT allows collaborators to mark-up 3-D models over the Internet using a variety of tools, including diagrammatic marks, dynamic simulations and text annotations. IDT relies on VRML to view the models, with an extensive Java-based interface on the backend powering the interactive construction and playback of graphical annotations, the management of threaded discussions, and the management of file input/output. The development of this tool has revealed the difficulty of constructing complex marks in a virtual 3-D space, and the initial implementation of IDT suggests several strategies for solving these problems.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	ga0009
id	ga0009
authors	Lewis, Matthew
year	2000
title	Aesthetic Evolutionary Design with Data Flow Networks
source	International Conference on Generative Art
summary	For a little over a decade, software has been created which allows for the design of visual content by aesthetic evolutionary design (AED) [3]. The great majority of these AED systems involve custom software intended for breeding entities within one fairly narrow problem domain, e.g., certain classes of buildings, cars, images, etc. [5]. Only a very few generic AED systems have been attempted, and extending them to a new design problem domain can require a significant amount of custom software development [6][8]. High end computer graphics software packages have in recent years become sufficiently robust to allow for flexible specification and construction of high level procedural models. These packages also provide extensibility, allowing for the creation of new software tools. One component of these systems which enables rapid development of new generative models and tools is the visual data flow network [1][2][7]. One of the first CG packages to employ this paradigm was Houdini. A system constructed within Houdini which allows for very fast generic specification of evolvable parametric prototypes is described [4]. The real-time nature of the software, when combined with the interlocking data networks, allows not only for vertical ancestor/child populations within the design space to be explored, but also allows for fast "horizontal" exploration of the potential population surface. Several example problem domains will be presented and discussed. References: [1] Alias \| Wavefront. Maya. 2000, http://www.aliaswavefront.com [2] Avid. SOFTIMAGE. 2000, http://www.softimage.com [3] Bentley, Peter J. Evolutionary Design by Computers. Morgan Kaufmann, 1999. [4] Lewis, Matthew. "Metavolve Home Page". 2000, http://www.cgrg.ohio-state.edu/~mlewis/AED/Metavolve/ [5] Lewis, Matthew. "Visual Aesthetic Evolutionary Design Links". 2000, http://www.cgrg.ohio-state.edu/~mlewis/aed.html [6] Rowley, Timothy. "A Toolkit for Visual Genetic Programming". Technical Report GCG-74, The Geometry Center, University of Minnesota, 1994. [7] Side Effects Software. Houdini. 2000, http://www.sidefx.com [8] Todd, Stephen and William Latham. "The Mutation and Growth of Art by Computers" in Evolutionary Design by Computers, Peter Bentley ed., pp. 221-250, Chapter 9, Morgan Kaufmann, 1999.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	b42b
authors	Martinez, B.S., Fasce, A., Merlos, N. and Ortega, F.G.
year	1999
title	Objeto, función y funcionamiento de la herramienta informática en las practicas proyectuales de los alumnos, aplicada a la generación de Diseño Textil. (Object, Function and Operation of Computer Tools in the practice of Design by students, applied to the generation of Textile Design)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 430-433
summary	Continuing with our investigation of application of the computer tool in the generation of Textile Design is that we center this work on the query about which, because and like they are carried out you practice them of representation using systems CAD in the generation of Textile Design, on the part of the students and the meaning that these they attribute to the use of this digital tool. The investigation of happiness is practiced it centers this way from its linking with these as alternative of pedagogic intervention, framed in the implementation particularities of you practice them proyects in the shop of Textile Design, with the objective of Knowing and Tipificar the different representation alternatives for the carried out students. The elected methodology for the present investigation is the qualitative logic, inside an interpretation focus, to describe and to interpret the meanings that the students grant to the use of the computer tool in their exercises proyects. For the process of obtaining of data, was carried out a flowing and open work, of interviews and permanent selection where you drain the sample according to the saturation approaches that settled down during the course of the same one, the analysis type it allowed us the conceptual comparisons, associated to strategies, by means of which we obtained the excellent information that finally will be processed and restored to the group for, if it considers it to him pertinent, become use material in the future.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	e6fb
authors	McFadzean, Jeanette
year	1999
title	Computational Sketch Analyser (CSA): Extending the Boundaries of Knowledge in CAAD
doi	https://doi.org/10.52842/conf.ecaade.1999.503
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 503-510
summary	This paper focuses on the cognitive problem-solving strategies of professional architectural designers and their use of external representations for the production of creative ideas. Using a new form of protocol analysis (Computational Sketch Analysis), the research has analysed five architects' verbal descriptions of their cognitive reasoning strategies during conceptual designing. It compares these descriptions to a computational analysis of the architects' sketches and sketching behaviour. The paper describes how the current research is establishing a comprehensive understanding of the mapping between conceptualisation, cognition, drawing, and complex problem solving. The paper proposes a new direction for Computer Aided Architectural Design tools (CAAD). It suggests that in order to extend the boundaries of knowledge in CAAD an understanding of the complex nature of architectural conceptual problem-solving needs to be incorporated into and supported by future conceptual design tools.
keywords	Computational Sketch Analysis, Conceptual Design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	f02b
authors	Mitchell, W.
year	1999
title	E-topia: urban life, Jim –but not as we know it
source	MIT press
summary	The global digital network is not just a delivery system for email, Web pages, and digital television. It is a whole new urban infrastructure--one that will change the forms of our cities as dramatically as railroads, highways, electric power supply, and telephone networks did in the past. In this lucid, invigorating book, William J. Mitchell examines this new infrastructure and its implications for our future daily lives. Picking up where his best-selling City of Bits left off, Mitchell argues that we must extend the definitions of architecture and urban design to encompass virtual places as well as physical ones, and interconnection by means of telecommunication links as well as by pedestrian circulation and mechanized transportation systems. He proposes strategies for the creation of cities that not only will be sustainable but will make economic, social, and cultural sense in an electronically interconnected and global world. The new settlement patterns of the twenty-first century will be characterized by live/work dwellings, 24-hour pedestrian-scale neighborhoods rich in social relationships, and vigorous local community life, complemented by far-flung configurations of electronic meeting places and decentralized production, marketing, and distribution systems. Neither digiphile nor digiphobe, Mitchell advocates the creation of e-topias--cities that work smarter, not harder.
series	other
last changed	2003/04/23 15:14

_id	d438
authors	Moloney, Jules
year	1999
title	Charcoal, Bits and Balsa: Cross Media Tactics in the Foundation Design Studio
doi	https://doi.org/10.52842/conf.ecaade.1999.110
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 110-115
summary	This paper investigates the space between the computer and traditional design media. The focus is the identification of strategies for extending creativity in the foundation year design studio via tactics of cross media working. The integration of computers into the design studio are described within a particular drawing culture at the University of Auckland. Creativity is related to a pedagogy of 'pattern' developed by M. Linzey. The cross media tactics are based on practical adaptation of the advantages of computing to the context of the foundation design studio (12 weeks / 80 students / 24 computers)
keywords	Education, Media, Studio, Creativity
series	eCAADe
email
last changed	2022/06/07 07:58

_id	60a5
authors	Oxman, R.E.
year	1999
title	Educating the designerly thinker
source	Design Studies, Vol 20 No 2
summary	This paper presents a hypothesis about design education that is framed within and derived from cognitive theories of learning. The relevance of design thinking and cognitive approaches to the development of pedagogical approaches in design education is presented and discussed. A conceptual model for design education that emphasizes the acquisition of explicit knowledge of design is proposed. The acquisition of knowledge is achieved through the explication of cognitive structures and strategies of design thinking. The explication process is constructed by exploiting a representational formalism, and a computational medium which supports both the learning process as well as the potential re-use of this knowledge. Finally, an argument is presented that the measure of learning, generally equated with the evaluation of the product of designing, can instead be based upon evaluating learning increments of acquired knowledge.
series	journal paper
email
last changed	2003/04/23 15:50

_id	138e
authors	Park, S.-H. and Gero, J.S.
year	1999
title	Qualitative representation and reasoning about shapes
source	Gero, J.S. and Tversky, B. (Eds.), Visual and Spatial Reasoning in Design , Key Centre of Design Computing and Cognition, University of Sydney, Sydney, Australia, pp. 55-68
summary	In this paper we present an approach to the qualitative representation of shape and its use. We use a qualitative coding scheme founded on landmarks in the shape. The scheme encodes a qualitative representation of angles, relative side lengths and curvatures at landmarks. We then show how such a representation can be used as a basis for reasoning about shapes using extracted shape features. We conclude with a preliminary analysis of 12 sketches of the architect Louis Kahn and show how they may be categorised based on these shape features.
keywords	Qualitative Representation, Shape Reasoning
series	other
email
last changed	2003/04/06 09:19

_id	5799
authors	Richens, P. and Trinder, M.
year	1999
title	Design Participation through the Internet: A Case Study
source	Architectural Research Quarterly Vol 3 No 4. CUP, Cambridge
summary	Cambridge University and Microsoft are planning a shared computer research and teaching laboratory on a green-field site to the west of the city. The clients wished to use internet based communication between themselves and their architects, including email, a web site and virtual reality. We explain how this is to be achieved, and describe experiences during the first half of a two-year project. Particularly successful has been the use of games software (QuakeII) for 3D presentation of the emerging building design.
series	journal
email
more	http://www.arct.cam.ac.uk/research/pubs/
last changed	2003/05/15 10:29

_id	d155
authors	Richens, Paul and Trinder, Michael
year	1999
title	Design participation through the Internet: a case study
source	arq . vol3 . no 4 . 1999
summary	Cambridge University and Microsoft are planning a shared computer research and teaching laboratory on a green-field site to the west of the city. The clients wished to use internet based communication between themselves and their architects, including email, a web site and virtual reality. We explain how this is to be achieved, and describe experiences during the first half of a two-year project. Particularly successful has been the use of games software (QuakeII) for 3D presentation of the emerging building design.
series	journal paper
email
last changed	2003/03/05 13:21

_id	53f0
authors	Richens, Paul and Trinder, Michael
year	1999
title	Exploiting the Internet to Improve Collaboration between Users and Design Team: The Case of the New Computer Laboratory at the University of Cambridge
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 31-47
summary	Cambridge University and Microsoft are building a shared computer research and teaching laboratory on a green-field site to the west of the city. The clients wished to use internet based communication between themselves and their architects, including email, a web site and virtual reality. We explain how this is to be achieved, and describe experiences during the first six months of a two year project. Particularly successful has been the use of games software (Quake 11) for 3d presentation of the emerging building design.
keywords	Collaborative Design, Internet, Virtual Reality
series	CAAD Futures
email
more	http://www.arct.cam.ac.uk/research/pubs/
last changed	2006/11/07 07:22

For more results click below: