Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 603

Reformat results as: short short into frame detailed detailed into frame

_id	e719
authors	Achten, Henri and Turksma, Arthur
year	1999
title	Virtual Reality in Early Design: the Design Studio Experiences
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 327-335
summary	The Design Systems group of the Eindhoven University of Technology started a new kind of design studio teaching. With the use of high-end equipment, students use Virtual Reality from the very start of the design process. Virtual Reality technology up to now was primarily used for giving presentations. We use the same technology in the design process itself by means of reducing the time span in which one gets results in Virtual Reality. The method is based on a very brief cycle of modelling in AutoCAD, assigning materials in 3DStudio Viz, and then making a walkthrough in Virtual Reality in a standard landscape. Due to this cycle, which takes about 15 seconds, the student gets immediate feedback on design decisions which facilitates evaluation of the design in three dimensions much faster than usual. Usually the learning curve of this kind of software is quite steep, but with the use of templates the number of required steps to achieve results is reduced significantly. In this way, the potential of Virtual Reality is not only explored in research projects, but also in education. This paper discusses the general set-up of the design studio and shows how, via short workshops, students acquire knowledge of the cycle in a short time. The paper focuses on the added value of using Virtual Reality technology in this manner: improved spatial reasoning, translation from two-dimensional to three-dimensional representations, and VR feedback on design decisions. It discusses the needs for new design representations in this design environment, and shows how fast feedback in Virtual Reality can improve the spatial design at an early stage of the design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	b4d2
authors	Caldas, Luisa G. and Norford, Leslie K.
year	1999
title	A Genetic Algorithm Tool for Design Optimization
doi	https://doi.org/10.52842/conf.acadia.1999.260
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 260-271
summary	Much interest has been recently devoted to generative processes in design. Advances in computational tools for design applications, coupled with techniques from the field of artificial intelligence, have lead to new possibilities in the way computers can inform and actively interact with the design process. In this paper we use the concepts of generative and goal-oriented design to propose a computer tool that can help the designer to generate and evaluate certain aspects of a solution towards an optimized behavior of the final configuration. This work focuses mostly on those aspects related to the environmental performance of the building. Genetic Algorithms are applied as a generative and search procedure to look for optimized design solutions in terms of thermal and lighting performance in a building. The Genetic Algorithm (GA) is first used to generate possible design solutions, which are then evaluated in terms of lighting and thermal behavior using a detailed thermal analysis program (DOE2.1E). The results from the simulations are subsequently used to further guide the GA search towards finding low-energy solutions to the problem under study. Solutions can be visualized using an AutoLisp routine. The specific problem addressed in this study is the placing and sizing of windows in an office building. The same method is applicable to a wide range of design problems like the choice of construction materials, design of shading elements, or sizing of lighting and mechanical systems for buildings.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	b78f
authors	Clayton, M.J., Warden, Robert B., Parker, Th.W.
year	1999
title	Virtual Construction of Architecture Using 3D CAD and Simulation
doi	https://doi.org/10.52842/conf.acadia.1999.316
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 316-324
summary	3D modeling and computer simulations provide new ways for architecture students to study the relationship between the design and construction of buildings. Digital media help to integrate and expand the content of courses in drafting, construction and design. This paper describes computer-based exercises that intensify the students’ experience of construction in several courses from sophomore to senior level. The courses integrate content from drafting and design communication, construction, CAD, and design. Several techniques are used to strengthen students’ awareness and ability in construction. These include: · Virtual design - build projects in which students construct 3D CAD models that include all elements that are used in construction. · Virtual office in which several students must collaborate under the supervision of a student acting as project architect to create a 3D CAD model and design development documents. · Virtual sub-contracting in which each student builds a trade specific 3D CAD model of a building and all of the trade specific models must be combined into a single model. · Construction simulations (4D CAD) in which students build 3D CAD models showing all components and then animate them to illustrate the assembly process. · Cost estimating using spreadsheets. These techniques are applied and reapplied at several points in the curriculum in both technical laboratory courses and design studios. This paper compares virtual construction methods to physical design – build projects and provides our pedagogical arguments for the use of digital media for understanding construction.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	groot_ddssar0221
id	groot_ddssar0221
authors	De Groot, E.H.
year	1999
title	Integrated Lighting System Assistant
source	Eindhoven University of Technology
summary	The aim of the design project described in this thesis is to design a tool to support the building design process. Developing a design is considered to be a wicked problem because it goes beyond reasonable or predictable limits. Consequently, in this design project we address two wicked problems simultaneously: a double wicked problem. The two wicked problems concerned are the design of Design Decision Support System [DDSS] and the conceptual design of office lighting systems. To get a handle on the first wicked problem, two workshops were organised to meet the possible future users and to create a common basis for the tool to be developed. To tackle the wickedness of the second problem, an office lighting model and performance evaluation method were developed and implemented in a new prototype computer system: Integrated Lighting System Assistant [ILSA]. The workshops have proven to be a good source of feedback and an essential link to daily practice. The ILSA prototype shows that it is possible to implement the lighting model and evaluation method into a working prototype that can support architects in making decisions for the early design stage in the field of integrating daylight and artificial lighting.
series	thesis:PhD
more	http://www.bwk.tue.nl/fago/AIO/ellie/
last changed	2003/12/16 07:16

_id	1ead
authors	Dinand, Munevver Ozgur and Ozersay, Fevzi
year	1999
title	CAAD Education under the Lens of Critical Communication Theories and Critical Pedagogy: Towards a Critical Computer Aided Architectural Design Education (CCAADE)
doi	https://doi.org/10.52842/conf.ecaade.1999.086
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 86-93
summary	Understanding the dominant ethos of our age is imperative but not easy. However it is quite evident that new technologies have altered our times. Every discipline is now forced to be critical in developing new concepts according to the realities of our times. Implementing a critical worldview and consciousness is now more essential than ever. Latest changes in information technology are creating pressure on change both in societal and cultural terms. With its direct relation to these technologies, computer aided architectural design education, is obviously an outstanding / prominent case within contemporary debate. This paper aims to name some critical points related to computer aided architectural design education (CAADE) from the perspective of critical communication studies and critical education theories. It tries to relate these three areas, by introducing their common concepts to each other. In this way, it hopes to open a path for a language of critique. A critique that supports and promotes experimentation, negotiation, creativity, social consciousness and active participation in architectural education in general, and CAADE in specific. It suggests that CAADE might become critical and produce meta-discourses [1 ] in two ways. Firstly, by being critical about the context it exists in, that is to say, its relationships to the existing institutional and social structures and secondly by being critical about the content it handles; in other words by questioning its ideological dimensions. This study considers that analysing the role of CAADE in this scheme can provide architectural education with the opportunity to make healthy projections for the future.
keywords	Critical Theories, Critical Pedagogy, Critical CAADE
series	eCAADe
email
last changed	2022/06/07 07:55

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	d931
authors	Gabryszewski, Artur B.
year	1999
title	Idea of an Intelligent Building - Development Prospects
doi	https://doi.org/10.52842/conf.ecaade.1999.739
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 739-743
summary	An ever-increasing number of offices as also residential buildings are being realised by designers and investors in accordance with the concept of an intelligent building. Houses of the new generation are being constructed. This is possible thanks to dynamic progress in the development of computer and microprocessor engineering techniques. Putting into reality the idea of the 'intelligent building' will become one of the most interesting assignments of Polish building industry in the rapidly approaching XXI century. The term 'intelligent building' first appeared in the eighties. The idea behind this conception is aspiring to create a friendly, work supporting, effective environment. The revolution in telecommunications and information technology along with change in the standards of office work, have caused computer networks and modem systems of automation and protection, to invade buildings. From the technical point of view, an intelligent building is an object in which all the subsystems co-operate with each other, forming a friendly environment for man. For users of an intelligent building, the most important issue is realisation of the following aims: object management which includes both control of human resources and automation systems in the building and also efficient management of the building space in such a way that the costs of its utilisation are minimised. The possibility of optional installation of modern systems and equipment should be facilitated by the architecture itself. Therefore, the specifics of all the building elements should be taken into account right at the designing stage. The following features characterise an intelligent building: integration of telecommunication systems in the building, central management and supervision system and utilisation of structural cabling as the carrier of signals controlling most of the systems in the building. Presently, there is no building in Poland that could be characterised by the three features mentioned.
keywords	High-tech Architecture, Ecology, CAAD
series	eCAADe
email
last changed	2022/06/07 07:50

_id	8666
authors	Martínez, A.C., Vigo, L., Cabral, J., Folchi, A. and Palacio, M.
year	2000
title	Seminario/Taller de Investigacón Proyectual:Estructura de taller activo para enseñar a proyectar asistido por la tipología y de software de mercado (Design Research Seminar/Workshop: A Structure of Active Studio for the Teaching of Design Aided by Typology and Commercial Software)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 377-379
summary	General outline: Typology has provided architects basic design resources in the past. Repertories have been created by comparing and establishing relations among a multiplicity of examples: these repertories have been used as the basis for new inventions. Research on type establishes the foundations for organized knowledge that can be accumulated, shared, and enriched by successive designs. We are testing our assumption that CAD is a specially adequate tool for the transformation and manipulation of type in the early stages of the design process. Goals: Our Seminar/Studio gives those who take part in it a renewed vision of type as a basic disposition that can be subject to dynamic transformations. The use of CAD will allow the participants to experiment and verify design decisions on the grounds of a systematic use of typological precedents. Methodology: Starting with definite examples of contemporary architecture and the design theory backing the examples selected, the seminar/ studio is developed in eight studio sessions, exploring different dimensions leading to the “parti”. It is meant for experienced designers, both advanced students and graduates. The first experimental seminar of two sessions took place in November 1999. A more developed version is under way in August, 2000.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cd2e
authors	O’Reilly, T.
year	1999
title	Hardware, Software and Infoware
source	Di Bona, C., Ockman, S. Stone, M.: Open Sources. Voices from the Open Source Revolution, First Edition, Sebastopol, CA: O’Reilly Publishers
summary	I was talking with some friends recently, friends who don't own a computer. They were thinking of getting one so they could use Amazon.com to buy books and CDs. Not to use ``the Internet,'' not to use ``the Web,'' but to use Amazon.com. Now, that's the classic definition of a ``killer application'': one that makes someone go out and buy a computer. What's interesting is that the killer application is no longer a desktop productivity application or even a back-office enterprise software system, but an individual web site. And once you start thinking of web sites as applications, you soon come to realize that they represent an entirely new breed, something you might call an ``information application,'' or perhaps even ``infoware.'' Information applications are used to computerize tasks that just couldn't be handled in the old computing model. A few years ago, if you wanted to search a database of a million books, you talked to a librarian, who knew the arcane search syntax of the available computerized search tools and might be able to find what you wanted. If you wanted to buy a book, you went to a bookstore, and looked through its relatively small selection. Now, tens of thousands of people with no specialized training find and buy books online from that million-record database every day. The secret is that computers have come one step closer to the way that people communicate with each other. Web-based applications use plain English to build their interface -- words and pictures, not specialized little controls that acquire meaning only as you learn the software. Traditional software embeds small amounts of information in a lot of software; infoware embeds small amounts of software in a lot of information. The ``actions'' in an infoware product are generally fairly simple: make a choice, buy or sell, enter a small amount of data, and get back a customized result.
series	other
last changed	2003/04/23 15:50

_id	a6a6
authors	Peyret, F., Jurasz, J., Carrel, A., Zekri, E. and Gorham, B.
year	2000
title	The Computer Integrated Road Construction project
source	Automation in Construction 9 (5-6) (2000) pp. 447-461
summary	This paper is about the "Computer Integrated Road Construction" (CIRC) project, which is a Brite-EuRam III funded project, lasting 1997–1999, aiming at introducing a new generation of control and monitoring tools for road pavements construction. These new tools are designed to bring on the sites significant improvements by creating a digital link between design office and job site. The first part of the paper describes the background of the project, which gathers seven European partners from five different countries, and gives the objectives of the project, in general and for each of the two targeted products: one for the compactors (CIRCOM) and one for the asphalt pavers (CIRPAV). Then, the two prototypes are described, each of them being broken down into three main sub-systems: the ground sub-system (GSS), the on-board sub-system (OB) and the positioning sub-system (POS). The expected benefits for the different users are also presented and quantified. The central part of the paper is devoted to the main technical innovations that have been developed in the frame of the project: universal vector database for road equipment guidance, multi-machine functionalities of CIRCOM and the two positioning systems which are actually the technological keys of the systems. Finally, the state of progress of the developments of the two CIRC products and the first commercial success achieved in parallel are presented.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	eeff
authors	Schanz, Javier A. and Garcia, Claudia V.
year	1999
title	Changes for the Visual Representation of the World - Transfer from the Analogical to the Digital
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 45-51
summary	This research work deals with the changes of paradigms as treated by architecture. These changes result from the loss of values of ontological dimensions accepted so far. The analysis addresses the understanding of these changes pushing our logic towards an attempt to apprehend the new dynamics and parameters that have invaded our disciplinary field. In the design process, different logical projections derived from a combination of traditional representational methods and updated technical resources (analogic and digital) have been tried. Technical resources have always conditioned the ways of conceiving, practicing and experiencing art and architecture, it is on this basis that we seek to find out how different modeling techniques have modified the relationship between reality and its representations. Thus the central topic of our thesis is "transfer from the analogic to the digital". We have developed a chronological analysis of the evolution of images and we have seen how each period depends on the main material vector of transmission, which modifies the perception of space and time. Within this iconographic analysis, we reflected on which the rules that connect architecture and the different ways of representation and production are and we were able to show how new technological resources condition the way we conceive architecture today. In our opinion, the best way to understand the nature of digital means is the implementation of a methodology that ranges between direct and critical dialogue and manual and digital ways of production. The designed was applied on a "centre of contemporary art". This allowed experimentation in the treatment of general and particular issues arising from the process of means interaction.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	db35
authors	Schmitt, G.
year	1999
title	Information Architecture: Basics of CAAD and its future
source	Basel: Birkhaeuser
summary	With increasing intensity, CAAD (Computer Aided Architectural Design) is determining the daily work of today's architectural offices. Computers allow complex designs to be visualised and altered with great speed and accuracy; three-dimensional models can be created with simulation and animation possibilities, and links to the World Wide Web provide access to a flow of information. The author develops his thesis that these aspects do not just enable the creative process to be optimised in a quantitative sense but also qualitatively. Alongside the spatial and time dimensions, the new electronic possibilities provide a fifth dimension in architecture.
series	other
email
last changed	2003/04/23 15:14

_id	ce86
authors	Von Wodtke, Mark
year	1999
title	Design with Digital Tools : Using New Media Creatively
source	McGraw Hill (Tx)
summary	Now, you can dive into all aspects of digital design confidentlywith this vital skill-building resource. Written by noted designer, educator, and author Mark von Wodtke, this new, perfectly timed book delivers ready-to-use professional guidance on the tools that are revolutionizing the design professions. It can help you and your design team use information technology more effectively and also help you engage your clients online. Use this book in your office, or in courses teaching design and the effective use of new media. With scores of examples, methods, strategies, and techniques, Mark von Wodtke hands you everything you need to work your way through 3-D prototyping, virtual reality environments, CAD programs, multimedia, and much more. In addition, you get hands-on help with the nuts-and-bolts of finding free information and images quickly, applying templates and applets, gaining access to detail, libraries, and smoothing workflow with management and collaborative tools.
series	other
last changed	2003/02/26 18:58

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	alqawasmi
id	alqawasmi
authors	Al-Qawasmi, J., Clayton, M.J., Tassinary, L.G. and Johnson, R..
year	1999
title	Observations on Collaborative Design and Multimedia Usage in Virtual Design Studio
source	J. Woosely and T. Adair (eds.), Learning virtually: Proceedings of the 6th annual distance education conference, San Antonio, Texas, pp. 1-9
summary	The virtual design studio (VDS) points to a new way of practicing and teaching architectural design. As a new phenomenon, little research has been done to evaluate design collaboration and multimedia usage in a distributed workplace like the virtual design studio. Our research provides empirical data on how students actually use multiple media during architectural collaborative design.
series	other
email
last changed	2003/12/06 09:55

_id	ga9925
id	ga9925
authors	Ambrosini, L., Longatti, M. and Miyajima, H.
year	1999
title	Time sections, abstract machines
source	International Conference on Generative Art
summary	conditions a time-spatial discontinuity in the urban grid, ancient walls casually discovered in a substrate of the contemporary town needs a surplus of information to be understood and interfaced with their current condition. diagrams diverse chronological stages of the urban evolution are mapped on the area, in order to read the historical stratifications as a multiplicity of signs; this abstract approach leads to consider the roman space as guided by metrics, a system of measure superimposed on the landscape, vs. medioeval spatial continuity, where more fluid relations between the same urban elements create a completely different pattern.assemblage (time sections) a surface, automatically displaced from the medioeval diagram, moves along the z axis, the historical stratification direction, intersecting in various, unpredictable, manners a series of paths; these paths start as parallels, allowing an undifferentiated access to the area, and mutate along their developing direction, intertweening and blending each other; linear openings are cut on the surface, virtually connecting the two levels by light, following the roman grid in rhythm and measure. Projected on the lateral wall, the cadence of the vertical and horizontal elements becomes a temporal diagram of the design process.movement time takes part into the process through two kinds of movement: the first one, freezed when reaches the best results, in terms of complexity, is given by the surface intersecting the tubular paths; the second one is represented by multiple routes walking on which the project can be experienced (in absence of any objective, fixed, point of view, movement becomes the only way to understand relations). Thresholds between typical architectural categories (such as inside-outside, object-landscape etc.) are blurred in favour of a more supple condition, another kind of continuity (re)appears, as a new media, between the different historical layers of the city.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	93a8
authors	Anders, P.
year	1999
title	Envisioning Cyberspace: Designing 3D Electronic Spaces
source	McGraw-Hill, NY
summary	Free of the constraints of physical form and limited only by imagination, new environments spring to life daily in a fantastic realm called cyberspace. The creators of this new virtual world may be programmers, designers, architects, even children. In this invigorating exploration of the juncture between cyberspace and the physical world, architect Peter Anders brings together leading-edge cyberspace art and architecture ... inspiring new techniques and technologies ... unexpected unions of reality and virtuality ... and visions of challenges and opportunities as yet unexplored. More than an invitation to tour fantastic realms and examine powerful tools, this book is a hard-eyed look at cyberspace's impact on physical, cultural, and social reality, and the human-centered principles of its design. This is a book that will set designers and architects thinkingNand a work of importance to anyone fascinated with the fast-closing space between the real and the virtual.
series	other
email
last changed	2003/04/23 15:14

_id	5cba
authors	Anders, Peter
year	1999
title	Beyond Y2k: A Look at Acadia's Present and Future
doi	https://doi.org/10.52842/conf.acadia.1999.x.o3r
source	ACADIA Quarterly, vol. 18, no. 1, p. 10
summary	The sky may not be falling, but it sure is getting closer. Where will you when the last three zeros of our millennial odometer click into place? Computer scientists tell us that Y2K will bring the world’s computer infrastructure to its knees. Maybe, maybe not. But it is interesting that Y2K is an issue at all. Speculating on the future is simultaneously a magnifying glass for examining our technologies and a looking glass for what we become through them. "The future" is nothing new. Orwell's vision of totalitarian mass media did come true, if only as Madison Avenue rather than Big Brother. Futureboosters of the '50s were convinced that each garage would house a private airplane by the year 2000. But world citizens of the 60's and 70's feared a nuclear catastrophe that would replace the earth with a smoking crater. Others - perhaps more optimistically -predicted that computers were going to drive all our activities by the year 2000. And, in fact, theymay not be far off... The year 2000 is symbolic marker, a point of reflection and assessment. And - as this date is approaching rapidly - this may be a good time to come to grips with who we are and where we want to be.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	becb
authors	Anders, Peter
year	1999
title	Electronic Extension: Some implications of cyberspace for the practice of architecture
doi	https://doi.org/10.52842/conf.acadia.1999.276
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 276-289
summary	This white-paper builds upon previous research to present hybrids of electronic and physical spaces as extensions of current design practice. It poses an hypothetical project - a hybrid of physical and cyberspaces - to be developed through an extrapolation of current architectural practice by fully exploiting new information technologies. The hybrid's attributes not only affect the scope of development but the very activities of the design team and client during - and after - deployment. The entire life cycle of the project is affected by its dual material and media presence. The paper concludes by discussing the effect the hybrid - here called a "cybrid" - on the occupant, and its local and global communities. It reviews the economics, administration, marketing, operation, flexibility, and extension of the project to assess its effects on these scales. The conclusions are provisional owing to the youth of the technologies. However, in laying out these issues, the author hopes to begin a discussion on effects computation will have on our built environment.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	b73a
authors	Angelo,C.V., Bins Ely, V.H.M., Bueno,A.P., Ludvig C. and Trezub, D.
year	1999
title	Space Syntax and the New Transportation System in the Santa Catarina Island
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 434-437
summary	The paper reports an on-going research that aims at describing and analysing some of the syntactic characteristics of the urban space of Santa Catarina Island, in an attempt to evaluate its performance, more specifically its social and spatial integration and segregation. The research has been conducted with the aid of the Aximagic software, still in exam stage and not yet released to the public, a tool being developed by a group of researches of the Rio Grande do Sul Federal University and given up by Prof. Doctor Benamy Turkienicz. The software is part of a larger georeferenced program called CityZoom wich includes others tools to the comprehention of the urban morphology. This program works with graphic pictures in the inlet of data and also in the acquisition of results. The syntactic study of the Santa Catarina Island as a whole aims to obtain the comprehension of its global structure, relating it to the integrated public transportation system proposed to Florianópolis. These studies should allow an understanding of the impact the developments will have upon the urban morphology, and the new public transportation system.
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: