Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 628

Reformat results as: short short into frame detailed detailed into frame

_id	b5a1
authors	Snijder, H.P.S. and Daru, R.
year	1999
title	Representing Floorplans for Interactive Evolutionary Design
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 343-346
summary	Computer tools that provide support in the early explorative phase of architectural design are rare. In order to explore the solution space of a design problem, architects in general rely on the use of paper and pencil. We are developing a system which will assist the designer in the exploration of a particular design problem, focusing initially on 2D floorplans. The format chosen for this system is one in which the computer, in interaction with the designer, "evolves" designs. A major obstacle associated with the use of an evolutionary approach is the adequate representation of a floorplan in a genome. We propose a tree-structure in which the nodes represent organising-principles that dictate how the leaves attached to it are organised. Figure 1 shows an example of a tree with four levels; the terminal nodes represent the elements to be placed. The first level no only represents an organising-principle, but also a contour; this contour is either fixed (e.g. dictated by the environment) or free to evolve. On either side of the tree-structure two interpretations of this tree are shown.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	ga0020
id	ga0020
authors	Codignola, G.Matteo
year	2000
title	[Title missing]
source	International Conference on Generative Art
summary	This paper is a summary of my last degree in architecture (discussed in December 1999) with Prof. Celestino Soddu and Prof. Enrica Colabella. In this work I had the possibility to reach complexity by a generative approach with the construction of a paradigm that organizes the different codes of project identity. My general objective was to design shape complexity in variable categories : 3d space surfaces, 2d drawings and 2d textures. I was to discover the identity of one of my favourite architects of the 20th century : Antoni Gaudì, by constructing codes relative to shape complexity. I defined my particular objective in the possibility to abduct from Gaudì's imaginary reference the generatives codes that operate in the logical processing I use to create a possible species project. The next step was to verify the exact working of the new generative codes by means of 3d scenaries, that are recognizable as "Antoni Gaudì specie's architecture". Whit project processing on the generative codes and not on a possible resulting shape design, I was able to organize by my general paradigm the attributes of the project's species : different shapes, different attributes (color, scale, proportion), to get to possible and different scenarys, all recognizable by the relative class codes. I chose three examples in Barcellona built during the period 1902 to 1914 : The Parco Guell, Casa Batllò and Casa Milà are the three reference sceneryes that I used to create the generative codes. In the second step I defined different codes that operate in sequence (it is defined in the paradigm) : The generatives codes are only subjective; they are one possible solution of my interpretation of Antoni Gaudì's identity. This codes operate in four differents ways : Geometrical codes for 2d shapes Geometrical codes for interface relations Spatial codes for 3d extrusion of 2d shapes Geometrical codes for 2d and 3d texturing of generated surfaces. By a stratified application of this codes I arrived at one idea for all the generative processes but many different, possible scenaryes, all recognizable in Gaudì's species. So, my final result has made possible sceneryes belonging to related species defined previously. At the end of my research I designed a project by combination : using Antoni Gaudì's generative codes on a new 3d scenary with a shape catalyst : the Frank Lloyd Wright Guggenheim Museum of New York. In this process I created a "hybrid scenary" : a new species of architectural look; a Guggenheim museum planned by Wright with a god pinch of Gaudì.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ga9916
id	ga9916
authors	Elzenga, R. Neal and Pontecorvo, Michael S.
year	1999
title	Arties: Meta-Design as Evolving Colonies of Artistic Agents
source	International Conference on Generative Art
summary	Meta-design, the act of designing a system or species of design instead of a design instance, is an important concept in modern design practice and in the generative design paradigm. For meta-design to be a useful tool, the designer must have more formal support for both design species definition/expression and the abstract attributes which the designer is attempting to embody within a design. Arties is an exploration of one possible avenue for supporting meta-design. Arties is an artistic system emphasizing the co-evolution of colonies of Artificial Life design or artistic agents (called arties) and the environment they inhabit. Generative design systems have concentrated on biological genetics metaphors where a population of design instances are evolved directly from a set of ‘parent’ designs in a succession of generations. In Arties, the a-life agent which is evolved, produces the design instance as a byproduct of interacting with its environment. Arties utilize an attraction potential curve as their primary dynamic. They sense the relative attraction of entities in their environment, using multiple sensory channels. Arties then associate an attractiveness score to each entity. This attractiveness score is combined with a 'taste' function built into the artie that is sensitized to that observation channel, entity, and distance by a transfer function. Arties use this attraction to guide decisions and behaviors. A community of arties, with independent evolving attraction criteria can pass collective judgement on each point in an art space. As the Artie moves within this space it modifies the environment in reaction to what it senses. Arties support for Meta-design is in (A) the process of evolving arties, breeding their attraction potential curve parameters using a genetic algorithm and (B) their use of sensory channels to support abstract attributes geometries. Adjustment of these parameters tunes the attraction of the artie along various sensing channels. The multi-agent co-evolution of Arties is one approach to creating a system for supporting meta-design. Arties is part of an on-going exploration of how to support meta-design in computer augmented design systems. Our future work with Arties-like systems will be concerned with applications in areas such as modeling adaptive directives in Architecture, Object Structure Design, spatio-temporal behaviors design (for games and simulations), virtual ambient spaces, and representation and computation of abstract design attributes.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	9747
authors	Ferrar, Steve
year	1999
title	New Worlds; New Landscapes
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 424-430
doi	https://doi.org/10.52842/conf.ecaade.1999.424
summary	Evolution, said Julian Huxley, is in three different sectors. The first is organic - the cosmic process of matter. The second is biological - the evolution of plants and animals. The third is psychological and is the development of man's cultures. It is this third stage that is now critical, and if we are to survive as a species it can only be by replacing nature's controls by our own, not only birth control but our use of the whole environment. (Nan Fairbrother, New Lives, New Landscapes)
keywords	Virtual Environments, Future, Culture
series	eCAADe
email
last changed	2022/06/07 07:56

_id	0beb
authors	Koch, Volker and Russell, Peter
year	2000
title	VuuA.Org: The Virtual Upperrhine University of Architecture
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 23-25
doi	https://doi.org/10.52842/conf.ecaade.2000.023
summary	In 1998, architecture schools in the three nation region of the upper Rhine came together to undertake a joint design studio. With the support of the Center for Entrepeneurship in Colmar, France, the schools worked on the reuse of the Kuenzer Mill situated near Herbolzheim, Germany. The students met jointly three times during the semester and then worked on the project at their home universities usng conventional methods. This project was essential to generating closer ties between the participating students, tutors and institutions and as such, the results were quite positive. So much so, that the organisers decided to repeat the exercise one year later. However, it became clear that although the students had met three times in large groups, the real success of a co-operative design studio would require mechanisms which allow far more intimate interaction among the participants, be they students, teachers or outside experts. The experiences from the Netzentwurf at the Institut für Industrielle Bauproduktion (ifib) showed the potential in a web based studio and the addition of ifib to the three nation group led to the development of the VuuA platform. The first project served to illuminate the the differences in teaching concepts among the partner institutions and their teaching staff as well as problems related to the integration of students from three countries with two languages and four different faculties: landscape architecture, interior design, architecture and urban planning. The project for the Fall of 1999 was the reuse of Fort Kléber in Wolfisheim by Strasbourg, France. The students again met on site to kick off the Semester but were also instructed to continue their cooperation and criticism using the VuuA platform.
keywords	Virtual Design Studio, CSCW, International Cooperation, Planning Platform
series	eCAADe
email
more	http://www.vuua.org
last changed	2022/06/07 07:51

_id	0647
authors	Rosenberg, D.
year	1999
title	Use Case Driven Object Modeling with UML
source	A Practical Approach. Reading, MA: Addison-Wesley
summary	Combining some of today's best ideas about customer-driven object-oriented design, Use Case Driven Object Modeling with UML: A Practical Approach shows you how to use Unified Modeling Language (UML) in the real world, keeping with the author's proprietary software design process. The book begins with the genesis of the author's ICONIX Unified Object Modeling Approach, borrowing ideas and strategies from the "three amigos" who invented UML: Grady Booch, James Rumbaugh, and Ivar Jacobson. Throughout this text, the ICONIX method is used to model a stock trading system, with all the relevant UML diagrams, beginning with class definition and use cases. The author's approach to software relies heavily on customer requirements and use case scenarios for which he has a good deal of practical advice. He provides numerous hints for avoiding bogged-down diagrams. After preliminary design, he advocates drilling down into specifics with robustness diagrams, which trace how classes interact with one another. The most detailed design work comes next with sequence diagrams. Subsequent chapters offer tips on project management, implementation, and testing. Throughout this lively and intelligently organized book, the author presents numerous real-world tips (and Top 10 lists) that supply wisdom to his perspective on effective software design.
series	other
last changed	2003/04/23 15:14

_id	cdc8
authors	Shea, K. and Cagan, J.
year	1999
title	The design of novel roof trusses with shape annealing: assessing the ability of a computational method in aiding structural designers with varying design intent
source	Design Studies 20 (1) (1999) pp. 3-23
summary	A study of roof truss designs conceived by architects and civil engineers as well as those generated with shape annealing, a computational design method for structural configuration, is presented. The purpose of this study is to assess the capabilities of shape annealing in (1) meeting the needs of designers with varying intent, and (2) presenting spatially intriguing, yet functional, structures that expand the range of designs considered in the conceptual design stage. An advantage of shape annealing for conceptual design is unbiased, directed exploration of the design space. The conclusion of this study is that shape annealing generates alternatives that appeal to designers with different purposes while providing insight into relations between structural form and function.
series	journal paper
last changed	2003/05/15 21:45

_id	8d95
authors	Stagnaro, Alberto and Archenti, Anibal R.
year	1999
title	ECPAS. Espacios de Control Puntual de Acción Simultánea (ECPAS. Spaces of Concentrated Control of Simultaneous Action)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 137-140
summary	The simultaneous action punctual control spaces, its species and its degrees of freedom are defined. It is proved that all of them follow the same parametric equation. A particular study of trifocus is made and the sections of the trifocoide are established the topological space where are the points that are at the minimal distance to other any three points of the plane is founded. It is proved that any ECPAS curve with coplanar focus has any number of spatial focus if this number is a multiple of the number of focus in its plane and in particular that the spatial ellipse focus are on his conjugated hyperbola.
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	d54b
authors	Thomas, N.J.T.
year	1999
title	Are theories of imagery theories of imagination? An active perception approach to conscious mental content
source	Cognitive Science 23(2): 207-245
summary	Can theories of mental imagery, conscious mental contents, developed within cognitive science throw light on the obscure (but culturally very significant) concept of imagination? Three extant views of mental imagery are considered: quasi-pictorial, description, and perceptual activity theories. The first two face serious theoretical and empirical difficulties. The third is (for historically contingent reasons) little known, theoretically underdeveloped, and empirically untried, but has real explanatory potential. It rejects the "traditional" symbolic computational view of mental contents, but is compatible with recent and approaches in robotics. This theory is developed and elucidated. Three related key aspects of imagination (non-discursiveness, creativity, and ) raise difficulties for the other theories. Perceptual activity theory presents imagery as non-discursive and relates it closely to . It is thus well placed to be the basis for a general theory of imagination and its role in creative thought.
series	journal paper
last changed	2003/04/23 15:50

_id	e978
authors	[Zupancic] Strojan, Tadeja Z.
year	1999
title	CyberUniversity
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 196-200
doi	https://doi.org/10.52842/conf.ecaade.1999.196
summary	The study of a cyberuniversity derives from an analogy between real urban space and its virtual "substitution". It represents an attempt to balance some views, which seems to be contrary, exclusive, but they are just parts of the same wholeness. Especially the notion of a cyber society is lately considered such an exaggeration, that it is possible to forget the meaning of a real life experience and interactions, which are already threatened. One should contribute to the awarness that is used in such a comparison, it is "just" an analogy, not a real similarity. At the same time it is possible to point out some limitations of a cyberspace and indicate a more realistic view of the meaning of cyber communities. Awarness of the development processes could help to find a balance between reality and virtuality, using cyberfacilities not to destroy us (our identity) but to improve the quality of our (real) life.
keywords	University, Cyberuniversity, Space, Cyberspace
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	bacd
authors	Abadí Abbo, Isaac
year	1999
title	APPLICATION OF SPATIAL DESIGN ABILITY IN A POSTGRADUATE COURSE
source	Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 75-82
summary	Spatial Design Ability (SDA) has been defined by the author (1983) as the capacity to anticipate the effects (psychological impressions) that architectural spaces or its components produce in observers or users. This concept, which requires the evaluation of spaces by the people that uses it, was proposed as a guideline to a Masters Degree Course in Architectural Design at the Universidad Autonoma de Aguascalientes in Mexico. The theory and the exercises required for the experience needed a model that could simulate spaces in terms of all the variables involved. Full-scale modeling as has been tested in previous research, offered the most effective mean to experiment with space. A simple, primitive model was designed and built: an articulated ceiling that allows variation in height and shape, and a series of wooden panels for the walls and structure. Several exercises were carried out, mainly to experience cause -effect relationships between space and the psychological impressions they produce. Students researched into spatial taxonomy, intentional sequences of space and spatial character. Results showed that students achieved the expected anticipation of space and that full-scale modeling, even with a simple model, proved to be an effective tool for this purpose. The low cost of the model and the short time it took to be built, opens an important possibility for Institutions involved in architectural studies, both as a research and as a learning tool.
keywords	Spatial Design Ability, Architectural Space, User Evaluation, Learning, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:27

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
doi	https://doi.org/10.52842/conf.ecaade.1999.169
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	e719
authors	Achten, Henri and Turksma, Arthur
year	1999
title	Virtual Reality in Early Design: the Design Studio Experiences
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 327-335
summary	The Design Systems group of the Eindhoven University of Technology started a new kind of design studio teaching. With the use of high-end equipment, students use Virtual Reality from the very start of the design process. Virtual Reality technology up to now was primarily used for giving presentations. We use the same technology in the design process itself by means of reducing the time span in which one gets results in Virtual Reality. The method is based on a very brief cycle of modelling in AutoCAD, assigning materials in 3DStudio Viz, and then making a walkthrough in Virtual Reality in a standard landscape. Due to this cycle, which takes about 15 seconds, the student gets immediate feedback on design decisions which facilitates evaluation of the design in three dimensions much faster than usual. Usually the learning curve of this kind of software is quite steep, but with the use of templates the number of required steps to achieve results is reduced significantly. In this way, the potential of Virtual Reality is not only explored in research projects, but also in education. This paper discusses the general set-up of the design studio and shows how, via short workshops, students acquire knowledge of the cycle in a short time. The paper focuses on the added value of using Virtual Reality technology in this manner: improved spatial reasoning, translation from two-dimensional to three-dimensional representations, and VR feedback on design decisions. It discusses the needs for new design representations in this design environment, and shows how fast feedback in Virtual Reality can improve the spatial design at an early stage of the design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	6d88
authors	Achten, Henri H. and Van Leeuwen, Jos P.
year	1999
title	Feature-Based High Level Design Tools - A Classification
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 275-290
summary	The VR-DIS project aims to provide design support in the early design stage using a Virtual Reality environment. The initial brief of the design system is based on an analysis of a design case. The paper describes the process of analysis and extraction of design knowledge and design concepts in terms of Features. It is demonstrated how the analysis has lead to a classification of design concepts. This classification forms one of the main specifications for the VR-based design aid system that is being developed in the VR-DIS programme. The paper concludes by discussing the particular approach used in the case analysis and discusses future work in the VR-DIS research programme.
keywords	Features, Feature-Based modelling, Architectural Design, Design Process, Design Support
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
doi	https://doi.org/10.52842/conf.acadia.2021.530
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	36d3
authors	Af Klercker, Jonas
year	1999
title	A CAVE-Interface in CAAD-Education?
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 313-323
doi	https://doi.org/10.52842/conf.caadria.1999.313
summary	The so called "CAVE-interface" is a very interesting and thrilling development for architects! It supports a better illusion of space by exposing almost a 270° view of a computer model than the 60° which can be viewed on an ordinary computer screen. At the Lund University we have got the possibility to experiment with a CAVE-installation, using it in research and the education of CAAD. The technique and three experiments are discribed. The possibilities are discussed and some problems and questions are put forward.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ae61
authors	Af Klercker, Jonas
year	1999
title	CAAD - Integrated with the First Steps into Architecture
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 266-272
doi	https://doi.org/10.52842/conf.ecaade.1999.266
summary	How and when should CAAD be introduced in the curriculum of the School of Architecture? This paper begins with some arguments for starting CAAD education at the very beginning. At the School of Architecture in Lund teachers in the first year courses have tried to integrate CAAD with the introduction to architectural concepts and techniques. Traditionally the first year is divided by several subjects running courses separatly without any contact for coordination. From the academic year 96/97 the teachers of Aplied aestetics, Building Science, Architectural design and CAAD have decided to colaborate as much as possible to make the role of our different fields as clear as possible to the students. Therefore integrating CAAD was a natural step in the academic year 98/99. The computer techniques were taught one step in advance so that the students can practise their understanding of the programs in their tasks in the other subjects. The results were surprisingly good! The students have quickly learned to mix the manual and computer techniques to make expressive and interesting visual presentations of their ideas. Some students with antipaty to computers have overcome this handicap. Some interesting observations are discussed.
keywords	Curriculum, First Year Studies, Integration, CAAD, Modelling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	37c2
authors	Ahmad Rafi, M.E.
year	1999
title	Visualisation of Design Using Animation for Virtual Prototyping
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 519-525
doi	https://doi.org/10.52842/conf.ecaade.1999.519
summary	Although recent technology in time-based representation has vastly improved, animation in virtual prototype design field remains the same. Some designers invest a huge amount of money in the latest visualisation and multimedia technology and yet may create even worse animation. They often cramp sequences resulting in many viewers failing to interpret the design positively as they miss a lot of vital information that explains the design. This paper basically reports the importance of film-making understanding for producing good virtual prototype animation. It will be based on a part of a research project on the use of time-based media in architectural practices. It also includes an empirical analysis of several architectural-based documentary films (including an interview with the film director) and past and present computer animation. This paper then concludes with recommendations of good techniques for making animated visualisation relative to the stage at which the animation is produced for better design decision.
keywords	Virtual Prototype, Animation, Time-Based, Film-Making
series	eCAADe
email
last changed	2022/06/07 07:54

_id	alqawasmi
id	alqawasmi
authors	Al-Qawasmi, J., Clayton, M.J., Tassinary, L.G. and Johnson, R..
year	1999
title	Observations on Collaborative Design and Multimedia Usage in Virtual Design Studio
source	J. Woosely and T. Adair (eds.), Learning virtually: Proceedings of the 6th annual distance education conference, San Antonio, Texas, pp. 1-9
summary	The virtual design studio (VDS) points to a new way of practicing and teaching architectural design. As a new phenomenon, little research has been done to evaluate design collaboration and multimedia usage in a distributed workplace like the virtual design studio. Our research provides empirical data on how students actually use multiple media during architectural collaborative design.
series	other
email
last changed	2003/12/06 09:55

For more results click below: