Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 626

Reformat results as: short short into frame detailed detailed into frame

_id	6e36
authors	Castañé, Dora
year	1999
title	Documentation and Patrimony. The Digital Era: A Channel for Memory Recovery
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 451-457
summary	The end of the millennium with its new digital technology is contributing important tools to the area of documentation and historical patrimony those of us who support the preservation of memories think that a very important way of personalizing and strengthening our identity is to provide to those who inhabit the city with heightened awareness towards the values of our past. The revitalization requires that the patrimony in itself be valued. At the same time, it necessitates the preparation of a great amount of information utilizing cataloguing, research databases, and other materials be accessible to all citizens. This piece of work shares the different digital data base experiences that are being developed in the CEDODAL foundation art and latinamerican architecture (center for documentation), which is under the direction of the architect Ramon Gutierrez, a research services organization, and diverse higher education institutions (universities). Four bases are introduced, each with different thought and criterion structures in the definition of fields as well as in their dynamic visualizations. Each of them possesses great quantities of digital images, blue prints, and texts. In three of those bases, the data is the output from teams of researchers in different topics through special arrangements with Santa Fe's provincial water), Fonart, and city government. At the same time, the CEDODAL catalogues its documentaries with great quantities of photographic information, blue prints, research passages, and a library.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	85ab
authors	Corrao, Rossella and Fulantelli, Giovanni
year	1999
title	Architects in the Information Society: The Role of New Technologies
doi	https://doi.org/10.52842/conf.ecaade.1999.665
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 665-671
summary	New Technologies (NTs) offer us tools with which to deal with the new challenges that a changing society or workplace presents. In particular, new design strategies and approaches are required by the emerging Information Society, and NTs offer effective solutions to the designers in the different stages of their professional life, and in different working situations. In this paper some meaningful scenarios of the use of the NTs in Architecture and Urban Design are introduced; the scenarios have been selected in order to understand how the role of architects in the Information Society is changing, and what new opportunities NTs offer them. It will be underlined how the telematic networks play an essential role in the activation of virtual studios that are able to compete in an increasingly global market; examples will be given of the use of the Web to support activities related to Urban Planning and Management; it will be shown how the Internet may be used to access strategic resources for education and training, and sustain lifelong learning. The aforesaid considerations derive from a Web-Based Instruction system we have developed to support University students in the definition of projects that can concern either single buildings or whole parts of a city. The system can easily be adopted in the other scenarios introduced.
keywords	Architecture, Urban Planning , New Technologies, World Wide Web, Education
series	eCAADe
email
last changed	2022/06/07 07:56

_id	1ead
authors	Dinand, Munevver Ozgur and Ozersay, Fevzi
year	1999
title	CAAD Education under the Lens of Critical Communication Theories and Critical Pedagogy: Towards a Critical Computer Aided Architectural Design Education (CCAADE)
doi	https://doi.org/10.52842/conf.ecaade.1999.086
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 86-93
summary	Understanding the dominant ethos of our age is imperative but not easy. However it is quite evident that new technologies have altered our times. Every discipline is now forced to be critical in developing new concepts according to the realities of our times. Implementing a critical worldview and consciousness is now more essential than ever. Latest changes in information technology are creating pressure on change both in societal and cultural terms. With its direct relation to these technologies, computer aided architectural design education, is obviously an outstanding / prominent case within contemporary debate. This paper aims to name some critical points related to computer aided architectural design education (CAADE) from the perspective of critical communication studies and critical education theories. It tries to relate these three areas, by introducing their common concepts to each other. In this way, it hopes to open a path for a language of critique. A critique that supports and promotes experimentation, negotiation, creativity, social consciousness and active participation in architectural education in general, and CAADE in specific. It suggests that CAADE might become critical and produce meta-discourses [1 ] in two ways. Firstly, by being critical about the context it exists in, that is to say, its relationships to the existing institutional and social structures and secondly by being critical about the content it handles; in other words by questioning its ideological dimensions. This study considers that analysing the role of CAADE in this scheme can provide architectural education with the opportunity to make healthy projections for the future.
keywords	Critical Theories, Critical Pedagogy, Critical CAADE
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2f05
authors	Kashiwagi, D.T.
year	1999
title	The construction delivery system of the information age
source	Automation in Construction 8 (4) (1999) pp. 417-425
summary	The Performance Based Studies Research Group (PBSRG) at the Del E. Webb School of Construction, has developed a methodology to process data into information to reduce facility system life-cycle cost and risk of nonperformance. The methodology reshapes the current construction industry model from a `low-bid', `all the same' industry into a `value added' performance based industry. The performance information regulated industry changes roles, partnerships, and communication methods between the construction industry and facility owners. The PBSRG research effort (US$1000K, 1994–present) includes the design and improvement of the Performance Based Procurement System (PBPS), performance data collection on general, mechanical, electrical, landscaping and janitorial services, and design services in the public and private commercial sectors, the identification of performance levels in the industrial sector, and the design of a performance based structure for a manufacturer of construction systems, as well as the education of the facility owners and the construction industry.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	2473
authors	Rivas Cruces, Alfonso
year	1999
title	El uso de la tecnología de información en el Rediseño de la práctica docente (The Use of Information Technology in the Redesign of the Teaching Practice)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 272-274
summary	The accelerated rate of change that we live nowadays, demands professionals to develop new learning skills to cope with it the rampant development of information technology opens up new horizons and challenges in the way that a human being can be formed through education. In response to the technological progress and rapid rate of change, the Tecnológico de Monterrey System has redesigned its education model, focusing on learning rather than teaching. This means not only acquiring knowledge on theory and concepts, but also learning skills, attitudes, and values that make students be committed with their community & country needs. It also means to be competitive in their area of knowledge at the international level. A central element in the new educational strategy is the technological platform where the academic courses are developed. This platform helps students and professors to do a great deal of the course activities on a lap-top through the computer the interaction between students with students, or professor with students has increased. At the Tecnológico de Monterrey System the implantation of the educational strategy has meant the creation of training programs for teachers, and technological development & support to attend over 5,000 teachers and 70,000 students.
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	c21a
authors	Fitzsimons, J. Kent
year	1999
title	Net-Based History of Architecture
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 319-325
summary	History sequences in professional architecture programs must meet broad educational objectives. Inherent in an architect’s education is a tension between the rigorous consideration of important ideas in the history of architecture and the inspired implementation of these ideas in the design studio. A digital history course can bridge the education/training divide by making the study of history emulate the methods and strategies used in the architecture studio. Using a relational database and navigation software, we have developed a course in which students move through a digital environment of text, image, audio and video resources pertaining to broad historical categories in architecture. Charged with producing historical genealogies, students must incorporate current architectural and cultural concerns in their distillation of the history presented by the articles, surveys, manifestoes, photographs, drawings and interviews encountered online. The immersive multimedia environment uses hyperlinks as a structure, placing emphasis on the student’s role in navigation while increasing the possibilities for chance encounters in the material. The delivery of basic material having been accomplished independently by the student, class meetings are used for higher-level discussions of the issues that surface. The project is currently being implemented as a half-semester course in 20th century architecture for a small group of sophomore students in the professional Bachelor of Architecture program. The project’s pedagogical and technical aspects will be discussed with respect to this stage of its development.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	25b2
authors	Kosasih, Sahrika
year	2001
title	The Research on the Relevance of the Computer Applications - Experiences from Indonesia
doi	https://doi.org/10.52842/conf.ecaade.2001.282
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 282-287
summary	Although CAD subject still is a subsidiary subject, there has been higher interest of students in the subject. Of 300 students at Department of Architecture, 50 students take the subject every semester. The research on the relevance of the computer application can be carried out thanking to the establishment of a CAD laboratory as a supporting facility of the Department of Architecture which was established in 1999 through QUE Program (Quality Undergraduate Educative) granted by the World Bank in undergraduate program proposal selection in Indonesia. It can therefore be identified how well students can improve their talents and skills in design subject. The laboratory is used not only in educational activities, it is also used to develop the computer application in design especially 2D and 3D design and the perspective drawing presentation.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	dfa1
authors	Laiserin, Jerry
year	1999
title	CAD in Practice Profile: R.M. Kliment and Frances Halsband Architects
doi	https://doi.org/10.52842/conf.acadia.1999.015.2
source	ACADIA Quarterly, vol. 18, no. 1, pp. 15-18
summary	R.M. Kliment and Frances Halsband Architects (KHA) is a firm recognized—among many outstanding achievements— for designing award-winning computer science centers at major universities (e.g., Columbia, Dartmouth, Princeton). With that design experience, it is no surprise that the firm has adopted an aggressive stance towards its own use of information technology (IT). One indication of this proactive approach to technology is that KHA, with a total staff of 33, carries a full-time CAD/systems manager position, as contrasted with the A/E-firm industry-wide average of one such full-time equivalent staff position for every 40 total employees. In effect, the firm has set its investment in and commitment to the role of IT at a rate twenty percent higher than the industry average. Such above-average investment in IT is consistent with other high-profile design firms that have won the prestigious Firm Award of the American Institute of Architects. (1)
series	ACADIA
email
last changed	2022/06/07 07:52

_id	ga0010
id	ga0010
authors	Moroni, A., Zuben, F. Von and Manzolli, J.
year	2000
title	ArTbitrariness in Music
source	International Conference on Generative Art
summary	Evolution is now considered not only powerful enough to bring about the biological entities as complex as humans and conciousness, but also useful in simulation to create algorithms and structures of higher levels of complexity than could easily be built by design. In the context of artistic domains, the process of human-machine interaction is analyzed as a good framework to explore creativity and to produce results that could not be obtained without this interaction. When evolutionary computation and other computational intelligence methodologies are involved, every attempt to improve aesthetic judgement we denote as ArTbitrariness, and is interpreted as an interactive iterative optimization process. ArTbitrariness is also suggested as an effective way to produce art through an efficient manipulation of information and a proper use of computational creativity to increase the complexity of the results without neglecting the aesthetic aspects [Moroni et al., 2000]. Our emphasis will be in an approach to interactive music composition. The problem of computer generation of musical material has received extensive attention and a subclass of the field of algorithmic composition includes those applications which use the computer as something in between an instrument, in which a user "plays" through the application's interface, and a compositional aid, which a user experiments with in order to generate stimulating and varying musical material. This approach was adopted in Vox Populi, a hybrid made up of an instrument and a compositional environment. Differently from other systems found in genetic algorithms or evolutionary computation, in which people have to listen to and judge the musical items, Vox Populi uses the computer and the mouse as real-time music controllers, acting as a new interactive computer-based musical instrument. The interface is designed to be flexible for the user to modify the music being generated. It explores evolutionary computation in the context of algorithmic composition and provides a graphical interface that allows to modify the tonal center and the voice range, changing the evolution of the music by using the mouse[Moroni et al., 1999]. A piece of music consists of several sets of musical material manipulated and exposed to the listener, for example pitches, harmonies, rhythms, timbres, etc. They are composed of a finite number of elements and basically, the aim of a composer is to organize those elements in an esthetic way. Modeling a piece as a dynamic system implies a view in which the composer draws trajectories or orbits using the elements of each set [Manzolli, 1991]. Nonlinear iterative mappings are associated with interface controls. In the next page two examples of nonlinear iterative mappings with their resulting musical pieces are shown.The mappings may give rise to attractors, defined as geometric figures that represent the set of stationary states of a non-linear dynamic system, or simply trajectories to which the system is attracted. The relevance of this approach goes beyond music applications per se. Computer music systems that are built on the basis of a solid theory can be coherently embedded into multimedia environments. The richness and specialty of the music domain are likely to initiate new thinking and ideas, which will have an impact on areas such as knowledge representation and planning, and on the design of visual formalisms and human-computer interfaces in general. Above and bellow, Vox Populi interface is depicted, showing two nonlinear iterative mappings with their resulting musical pieces. References [Manzolli, 1991] J. Manzolli. Harmonic Strange Attractors, CEM BULLETIN, Vol. 2, No. 2, 4 -- 7, 1991. [Moroni et al., 1999] Moroni, J. Manzolli, F. Von Zuben, R. Gudwin. Evolutionary Computation applied to Algorithmic Composition, Proceedings of CEC99 - IEEE International Conference on Evolutionary Computation, Washington D. C., p. 807 -- 811,1999. [Moroni et al., 2000] Moroni, A., Von Zuben, F. and Manzolli, J. ArTbitration, Las Vegas, USA: Proceedings of the 2000 Genetic and Evolutionary Computation Conference Workshop Program – GECCO, 143 -- 145, 2000.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ga9902
id	ga9902
authors	Soddu, Celestino
year	1999
title	Recognizability of designer imprinting in Generative artwork
source	International Conference on Generative Art
summary	Design lives within two fundamental stages, the creative and the evolutionary. The first is that of producing the idea: this approach is built activating a logical jump between the existing and possible worlds that represent our wishes and thoughts. A design idea is the identification of a set of possibilities that goes beyond specific "solutions" but identifies the sense or the attainable quality. The field involved in this design stage is "how" the world may be transformed, not what the possible scenario may be. The second is the evolutionary stage, that of the development of the idea. This approach runs inside paths of refinement and increases in complexity of the projects. It involves the management of the project to reach the desired quality.Generative design is founded on the possibility to clearly separate the creative and the evolutionary stages of the idea. And the first is reserved for man (because creative processes, being activated from subjective interpretations and being abduptive paths and not deductive, inductive or analytical ones, can not be emulated by machines) and the second may be carried out using artificial devices able to emulate logical procedures. The emulation of evolutionary logics is useful for a very simple reason: for getting the best operative design control on complexity. Designers know very well that the quality of a project depends, very importantly, on the time spent designing. If the time is limited, the project can not evolve enough to attain the desired quality. If the available time is increased, the project acquires a higher quality due to the possibility of crossing various parallel evolutionary paths, to develop these and to verify their relative potential running through the cycle idea/evolution more times and in progress. (scheme1) This is not all. In a time-limited design activity, the architect is pressed into facing the formalization of performance requirements in terms of answering directly specific questions. He is pressed into analytically systematizing the requirements before him to quickly work on the evolution of the project. The design solution can be effective but absolutely not flexible. If the real need of the user is, even slightly, different to the hypothesized requirement, the quality of the project, as its ability to respond to needs, breaks down. Projects approached in this way, which we could call "analytical", are quickly obsolete, being tied up to the flow of fashion. A more "creative" approach, where we don't try to accelerate (therby simplifying) the design development path "deducting" from the requirements the formalization choices but we develop our idea using the requirements and the constraints as opportunities of increasing the complexity of the idea, enriching the design development path to reach a higher quality, needs, without doubt, more time. As well as being, of course, a creative and non-analytical approach. This design approach, which is "the" design path, is a voyage of discovery that is comparable to that of scientific research. The fundamental structure is the idea as a "not deducted" hypothesis concerning a quality and recognizability of attainable artwork, according to the architect's "subjective" point of view. The needs and the constraints, identified as fields of possible development of the project, are opportunities for the idea to develop and acquire a specific identity and complexity. Once possible scenarios of a project are formed, the same requirements and constraints will take part, as "verification of congruity", of the increase in quality. Then the cycle, once more, will be run again to reach more satisfactory results. It is, without doubt, an approach that requires time.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	8171
authors	Ataman, Osman
year	1999
title	Facilitating Conceptual Change: Computers, Cognitive Processes and Architecture
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 275-279
summary	Computers have gained universal acceptance as tools that designers use. However, computers are often not used to advance the design process but just to make drawings. Many architectural schools still focus on a production orientation which puts the highest value on information management, precise representations and drafting enhancements. Mostly, computer education is limited with button pushing and training manuals. It is the contention of the author that students in Design Studio courses can benefit greatly from computer based educational pedagogy designed to provide them with experiences they currently do not possess. In particular, little time in the computer courses (outside lectures) is spent applying concepts and features of digital tools in design studio environment. In architecture, computers cannot be simply defined as a presentation and production tools. As a cognitive tool, computers provide designers with intelligible and effective representational tools of thought and communication, changes the syntactic structure of design. Consequently, the conceptual structure of computers impacts the conceptual structure of the design project, fosters the analytical processes and facilitates conceptual changes. This paper describes the use of computers in a first year architectural design studio. It attempts to address the importance of developing a design process that is redefined by the use of computing, integrating concept and perception. Furthermore, it describes the theoretical foundations and the underlying cognitive processes that contribute designers' conceptual development.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	f288
authors	Bille, Pia
year	1999
title	Integrating GIS and Electronic Networks In Urban Design and Planning
doi	https://doi.org/10.52842/conf.ecaade.1999.722
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
summary	In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords	Urban Planning, Electronic Collaboration, GIS, Data Bases
series	eCAADe
email
last changed	2022/06/07 07:54

_id	bbb9
authors	Blaise, Jean-Yves and Dudek, Iwona
year	1999
title	SOL: Spatial and Historical Web-Based Interface for On Line Architectural Documentation of Krakow's Rynek Gowny
doi	https://doi.org/10.52842/conf.ecaade.1999.700
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 700-707
summary	Our paper presents recent developments of a co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France), specialised in computer science and the HAiKZ Institute of Krakow's Faculty of Architecture, specialised in architectural heritage and conservation. Before undertaking any action to a listed building or interventions in its neighbourhood, it is vital to gain a clear understanding of the building in question. Numerous heterogeneous data detained by diverse institutions has to be handled. This process can be greatly eased by enhanced classification of the information. The development we present is a multidisciplinary platform independent information tool dedicated to education and research. SOL uses an http protocol centred computer architecture connecting a relational database, a VRML 2.0 representation module and a web search interface. It allows searches and updating of the database through a standard text based interface, a VRML 2.0 graphical module and a thematic interface. SOL is experienced on the urban fabric of the Main Square (Rynek Gówny) in Kraków. The choice of a web-centred development, both in the search and updating interface and in the representation module provides platform independence and distant access to the database, and enables successive contributions of students or researchers.
keywords	Web Interface, Database, Architectural Heritage Environment, Information Module, Historical Evolutions
series	eCAADe
email
more	http://alberti.gamsau.archi.fr
last changed	2022/06/07 07:52

_id	875c
authors	Bonta, Pedro
year	1999
title	CAO - Centro Asistido Por Ordenador
doi	https://doi.org/10.52842/conf.acadia.1999.012
source	ACADIA Quarterly, vol. 18, no. 1, pp. 12-12
summary	The formal education of future professionals requires training in four basic skills: abstraction, systemical thought, experimentation and collaboration. The capacity of abstraction allows to understand and manage realty in different ways in order to create opportunities to reinterpret and reorganize the information. The systemical thought promotes the distinction and the interpretation, teaching how they should be interpreted and how they can be refuted. They should learn how to analyze the reality from different points of view, under different conditions, which allows imagining new alternatives and possibilities. Through the experimentation we look for different possibilities and results and verify analogies and relevant differences, comparing with previous ideas. Another relevant aspect is the capacity of collaborating, sharing troubles and solutions, building new knowledge.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	125a
authors	Dikbas, Attila
year	1999
title	An Evaluating Model for the Usage of Web-based Information Technology in Computer Aided Architectural Design and Engineering Education
doi	https://doi.org/10.52842/conf.ecaade.1999.349
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 349-352
summary	New technologies often reshape expectations, needs and Opportunities so as to develop strategic Plans for the implementation of Information Techniques in education and research. The widespread acceptance of the internet and more specifically the World Wide Web (WWW) has raised the awareness of educators to the potential for online education, virtual classrooms and even virtual universities. With the advent of computer mediated communication, especially the widespread adoption of the web as a publishing medium, educators see the advantages and potential of delivering educational material over the Internet. The Web offers an excellent medium for content delivery with full text, colour graphics support and hyperlinks. The Purpose of this paper is to present a model for the usage of web-based information technology in computer aided architectural design and engineering education. It involves the key features of a full educational system that is capable of offering the teacher and the student flexibility with which to approach their teaching and learning tasks in ways most appropriate to the architectural design and engineering education. Web-based educational system aims at creating quality in on-line educational materials taking collaboration, support, new skills, and, most of all, time. The paper concludes with a discussion of the benefits of such an education system suggesting directions for further work needed to improve the quality of architectural design and engineering education.
keywords	Web-based Information Technology, Online Education, Virtual Campus, Computer Aided Architectural Design, Engineering Education
series	eCAADe
last changed	2022/06/07 07:55

_id	bd1e
authors	Evans, Barrie
year	1999
title	A Communicating Profession
doi	https://doi.org/10.52842/conf.ecaade.1999.313
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 313-320
summary	This paper discusses aspects of the near future, a future that in parts is already with us, a future that we need to attend to now. The focus is computer aided design, but not graphics-based CAD. Rather today's CAD innovation is focused on the use of smart communications to provide designers with an information-rich support environment and the design team with an infrastructure for co-operative working. Based on this picture of a different, emerging CAD, the paper finishes with a brief comment on educational implications. One is that the emerging commercial project information management software could prove useful as infrastructure for co-operative educational projects. Another is that there could be significant gaps in information content for educational users as education becomes more IT-based. Should providing this content be a role for joint ECAADE research and development projects?
keywords	Information, Smart Telecomms, CSCW, Learning, CAD
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2fc7
authors	Forber, U. and Russell, P.
year	1999
title	Interdisciplinary Collaboration in the Virtual Design Studio Design Studio
source	Proceedings of the 17th Annual EAAE Annual Conference, Plymouth UK
summary	Drastic changes in technology and economics currently impact common working structures. Moreover, a fundamental move of western societies from industrial and service oriented societies to information oriented societies can be observed. Like others, the AEC industry is also exposed to the challenge of these fundamental changes, not only regarding an ever growing stock of information on building components and materials, but also because of new methods of collaboration to be applied by all participants. As a result, integrating domain specific knowledge into the design process and conversely, conveying design intentions to domain experts, is meaningful in a constantly growing scale. Utilising advanced technology, a twofold approach in research and education, undertaken at the Institut für Industrielle Bauproduktion (ifib), University of Karlsruhe, is the basis of efforts to create and develop integrating methods of collaboration into the design and planning process. In addition, the integration of AEC practitioners (investors, users, designers, engineers) in the education process provides both drastic changes in the fields of design and construction education of students and a promising approach for life long learning. The focus of this paper is to present the current state of work and to report on experiences gathered during several Virtual Design Studios (VDS) in which multi-disciplinary participants from various Universities and backgrounds were involved. Platforms for the activities are World Wide Web based applications as well as animations, VR, CAD and video conferencing.
series	other
email
last changed	2003/04/23 15:50

_id	1873
authors	Ji, Guohua and Feng, Jinlong
year	1999
title	Structural Approach to the Organization of Information: A Teaching Experiment at SEU
doi	https://doi.org/10.52842/conf.caadria.1999.153
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 153-159
summary	Design studio still plays a very important role in architectural design education today since teachers and students can exchange their thinking directly. In the whole teaching/learning process, there are a lot of information to be exchanged between the teachers and the students. How to organize the information and record the whole teaching/learning process is very interesting to us. The increasing use of CAD raises some problems with its advantages when the amount of compute-files becomes very big and they are in different formats. In the third year design studio teaching in the academic year 1998/99 at Department of Architecture in Southeast University, we try to use WWW techniques and features to organise the design information. We try to integrate the teaching programme, the project information, the reference material and the students' work together, to record and monitor the teaching process. Since the teaching programme is clearly organised, we could use some strategies and ideas to control the organisation of file storage and presentation. It creates the basis for the further development of applying network to aid the studio teaching.
series	CAADRIA
last changed	2022/06/07 07:52

For more results click below: