Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 625

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	d931
authors	Gabryszewski, Artur B.
year	1999
title	Idea of an Intelligent Building - Development Prospects
doi	https://doi.org/10.52842/conf.ecaade.1999.739
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 739-743
summary	An ever-increasing number of offices as also residential buildings are being realised by designers and investors in accordance with the concept of an intelligent building. Houses of the new generation are being constructed. This is possible thanks to dynamic progress in the development of computer and microprocessor engineering techniques. Putting into reality the idea of the 'intelligent building' will become one of the most interesting assignments of Polish building industry in the rapidly approaching XXI century. The term 'intelligent building' first appeared in the eighties. The idea behind this conception is aspiring to create a friendly, work supporting, effective environment. The revolution in telecommunications and information technology along with change in the standards of office work, have caused computer networks and modem systems of automation and protection, to invade buildings. From the technical point of view, an intelligent building is an object in which all the subsystems co-operate with each other, forming a friendly environment for man. For users of an intelligent building, the most important issue is realisation of the following aims: object management which includes both control of human resources and automation systems in the building and also efficient management of the building space in such a way that the costs of its utilisation are minimised. The possibility of optional installation of modern systems and equipment should be facilitated by the architecture itself. Therefore, the specifics of all the building elements should be taken into account right at the designing stage. The following features characterise an intelligent building: integration of telecommunication systems in the building, central management and supervision system and utilisation of structural cabling as the carrier of signals controlling most of the systems in the building. Presently, there is no building in Poland that could be characterised by the three features mentioned.
keywords	High-tech Architecture, Ecology, CAAD
series	eCAADe
email
last changed	2022/06/07 07:50

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2fd9
authors	Siniacoff, Martha
year	1999
title	The Cadastral Information System and its Objectives
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 213-218
summary	The solutions that allow us to attend the potential exigencies planned for a territorial administration, oblige us to establish an informatizated step, performed with a group of logical tools, supported in the corresponding data bases. This means to establish an Information System who integrates basic data to activities and own resources, being a fundamental aspect of these Systems their capacity to synthetisize the dinamic of phenomena that reflect and several parameters that are the base to analyse this. Urban and Rural real estates (cadastral register) are elementary territorial unities whose integration, complemented with structural elements of a localization area, constitute the continuous of spatial information with the most degree of resolution. Trying as "variables” all physical, economical and juridical circunstances, this continuous of information in transformed in an extraordinary and interesting product, which can be potentiate if we include the Geographic Information System (GIS) concept, resulting of adding digital cartographic data bases to attributes and literal characteristics of elements stored in alphanumeric ones. The reason of this article is to divulge the Territorial Information System set up in the Cadastral Office of the City Hall of Montevideo, based on GIS technology, emphatizying the utility it produces in so large applications as: to investigate land occupation and property distribution, to planify and optimize resources and services, to act as a fundamental support to elaborate thematic cartographies, to serve as a detailed and precise support for urbanism, service flows and territorial ordenation and all other products issued for the own implantation philosofy, constituted with an open structure where the mentioned Office isn’t the only user.
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	ga9928
id	ga9928
authors	Goulthorpe
year	1999
title	Hyposurface: from Autoplastic to Alloplastic Space
source	International Conference on Generative Art
summary	By way of immediate qualification to an essay which attempts to orient current technical developments in relation to a series of dECOi projects, I would suggest that the greatest liberation offered by new technology in architecture is not its formal potential as much as the patterns of creativity and practice it engenders. For increasingly in the projects presented here dECOi operates as an extended network of technical expertise: Mark Burry and his research team at Deakin University in Australia as architects and parametric/ programmatic designers; Peter Wood in New Zealand as programmer; Alex Scott in London as mathematician; Chris Glasow in London as systems engineer; and the engineers (structural/services) of David Glover’s team at Ove Arup in London. This reflects how we’re working in a new technical environment - a new form of practice, in a sense - a loose and light network which deploys highly specialist technical skill to suit a particular project. By way of a second disclaimer, I would suggest that the rapid technological development we're witnessing, which we struggle to comprehend given the sheer pace of change that overwhelms us, is somehow of a different order than previous technological revolutions. For the shift from an industrial society to a society of mass communication, which is the essential transformation taking place in the present, seems to be a subliminal and almost inexpressive technological transition - is formless, in a sense - which begs the question of how it may be expressed in form. If one holds that architecture is somehow the crystallization of cultural change in concrete form, one suspects that in the present there is no simple physical equivalent for the burst of communication technologies that colour contemporary life. But I think that one might effectively raise a series of questions apropos technology by briefly looking at 3 or 4 of our current projects, and which suggest a range of possibilities fostered by new technology. By way of a third doubt, we might qualify in advance the apparent optimism of architects for CAD technology by thinking back to Thomas More and his island ‘Utopia’, which marks in some way the advent of Modern rationalism. This was, if not quite a technological utopia, certainly a metaphysical one, More’s vision typically deductive, prognostic, causal. But which by the time of Francis Bacon’s New Atlantis is a technological utopia availing itself of all the possibilities put at humanity’s disposal by the known machines of the time. There’s a sort of implicit sanction within these two accounts which lies in their nature as reality optimized by rational DESIGN as if the very ethos of design were sponsored by Modern rationalist thought and its utopian leanings. The faintly euphoric ‘technological’ discourse of architecture at present - a sort of Neue Bauhaus - then seems curiously misplaced historically given the 20th century’s general anti-, dis-, or counter-utopian discourse. But even this seems to have finally run its course, dissolving into the electronic heterotopia of the present with its diverse opportunities of irony and distortion (as it’s been said) as a liberating potential.1 This would seem to mark the dissolution of design ethos into non-causal process(ing), which begs the question of ‘design’ itself: who 'designs' anymore? Or rather, has 'design' not become uncoupled from its rational, deterministic, tradition? The utopianism that attatches to technological discourse in the present seems blind to the counter-finality of technology's own accomplishments - that transparency has, as it were, by its own more and more perfect fulfillment, failed by its own success. For what we seem to have inherited is not the warped utopia depicted in countless visions of a singular and tyrranical technology (such as that in Orwell's 1984), but a rich and diverse heterotopia which has opened the possibility of countless channels of local dialect competing directly with the channels of power. Undoubtedly such multiplicitous and global connectivity has sent creative thought in multiple directions…
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	37c2
authors	Ahmad Rafi, M.E.
year	1999
title	Visualisation of Design Using Animation for Virtual Prototyping
doi	https://doi.org/10.52842/conf.ecaade.1999.519
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 519-525
summary	Although recent technology in time-based representation has vastly improved, animation in virtual prototype design field remains the same. Some designers invest a huge amount of money in the latest visualisation and multimedia technology and yet may create even worse animation. They often cramp sequences resulting in many viewers failing to interpret the design positively as they miss a lot of vital information that explains the design. This paper basically reports the importance of film-making understanding for producing good virtual prototype animation. It will be based on a part of a research project on the use of time-based media in architectural practices. It also includes an empirical analysis of several architectural-based documentary films (including an interview with the film director) and past and present computer animation. This paper then concludes with recommendations of good techniques for making animated visualisation relative to the stage at which the animation is produced for better design decision.
keywords	Virtual Prototype, Animation, Time-Based, Film-Making
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6480
authors	Asanowicz, Aleksander
year	1999
title	Computer in Creation of Architectural Form
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999,pp. 131-142
summary	This paper considers graphic methods of presentation of ideas 'in the creation of architectural forms' and evolution of these methods, determined by the implementations of information technology. Drawings have been the main medium of expression since Leonardo da Vinci to the present-day. Graphic communication has always been treated as a main design tool, both - at the ending stage of design and at the early design stage. Implementation of computers in design doe not change this situation. The entire design process proceeds in a traditional way. While searching for the idea we use hand sketches and, after this, technical drawings are draught on a plotter, which replaces a drawing pen. Using computers at the early design stages encounters serious difficulties. The main thesis of this paper is that hardware and software inadequacy is not the problem, the problem is in the inadequacy of the design methods. This problem is to be reconceived as what a person can do with a program, rather than what is the capacity of a program. Contemporary computer techniques allow us to put an equation mark between the searching for idea, visualisation and its realisation in virtual space. This paper presents Sketching by scanning - an experimental method of using computer hardware and software for stimulating of searching of architectural's form.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	f288
authors	Bille, Pia
year	1999
title	Integrating GIS and Electronic Networks In Urban Design and Planning
doi	https://doi.org/10.52842/conf.ecaade.1999.722
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
summary	In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords	Urban Planning, Electronic Collaboration, GIS, Data Bases
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6e36
authors	Castañé, Dora
year	1999
title	Documentation and Patrimony. The Digital Era: A Channel for Memory Recovery
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 451-457
summary	The end of the millennium with its new digital technology is contributing important tools to the area of documentation and historical patrimony those of us who support the preservation of memories think that a very important way of personalizing and strengthening our identity is to provide to those who inhabit the city with heightened awareness towards the values of our past. The revitalization requires that the patrimony in itself be valued. At the same time, it necessitates the preparation of a great amount of information utilizing cataloguing, research databases, and other materials be accessible to all citizens. This piece of work shares the different digital data base experiences that are being developed in the CEDODAL foundation art and latinamerican architecture (center for documentation), which is under the direction of the architect Ramon Gutierrez, a research services organization, and diverse higher education institutions (universities). Four bases are introduced, each with different thought and criterion structures in the definition of fields as well as in their dynamic visualizations. Each of them possesses great quantities of digital images, blue prints, and texts. In three of those bases, the data is the output from teams of researchers in different topics through special arrangements with Santa Fe's provincial water), Fonart, and city government. At the same time, the CEDODAL catalogues its documentaries with great quantities of photographic information, blue prints, research passages, and a library.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	0dc3
authors	Chambers, Tom and Wood, John B.
year	1999
title	Decoding to 2000 CAD as Mediator
doi	https://doi.org/10.52842/conf.ecaade.1999.210
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 210-216
summary	This paper will present examples of current practice in the Design Studio course of the BDE, University of Strathclyde. The paper will demonstrate an integrated approach to teaching design, which includes CAD among other visual communication techniques as a means to exploring design concepts and the presentation of complex information as part of the design process. It will indicate how the theoretical dimension is used to direct the student in their areas of independent study. Projects illustrated will include design precedents that have involved students in the review and assessment of landmarks in the history of design. There will be evidence of how students integrate DTP in the presentation of site analysis, research of appropriate design precedents and presentation of their design solutions. CADET underlines the importance of considering design solutions within the context of both our European cultural context and of assessing the environmental impact of design options, for which CAD is eminently suited. As much as a critical method is essential to the development of the design process, a historical perspective and an appreciation of the sophistication of communicative media will inform the analysis of structural form and meaning in a modem urban context. Conscious of the dynamic of social and historical influences in design practice, the student is enabled "to take a critical stand against the dogmatism of the school "(Gadamer, 1988) that inevitably insinuates itself in learning institutions and professional practice.
keywords	Design Studio, Communication, Integrated Teaching
series	eCAADe
email
last changed	2022/06/07 07:56

_id	90dc
authors	Chen, C.
year	1999
title	Information Visualisation and Virtual Environments
source	Springer
summary	Information Visualisation is a fast growing research field and an industry with tremendous potential. Virtual environments provide a unique medium for people to communicate and interact over computer networks. Information Visualisation and Virtual Environments links the two areas together and presents the latest research and development, highlighting the potential of information visualisation as an enabling technology in the design of new generations of virtual environments. This book will be an invaluable source of reference for courses in Information Visualisation, User Interface Design, Virtual Environments, HCI, and Information Retrieval, as well as being a useful resource for consultants and practitioners. The book contains 144 wonderful colour images of intriguing and influential works in information visualisation.
series	other
last changed	2003/04/23 15:14

_id	7dcd
authors	Cotton B. and Oliver, R.
year	1999
title	Understanding Hypermedia
source	Phaidon Press Ltd, London
summary	Understanding Hypermedia 2,000 is a wonderful read. It takes you on a journey tracing the origins of hypermedia from its very early beginings way back in the 1700's with the birth of print, all the way through to the modern new media revolution. It charts the developments in technology, culture, science and the arts to give you a very broad understanding of just what hypermedia is and where it came from. Looking to the future, Understanding Hypermedia looks at the components of hypermedia - interface design, typography, text, animation, video, vrml, etc -, the processes of designing and building new media projects - including examples from the web, cdrom and kiosks - and the future of the medium. From the hypermedia innovators to the visionaries of cyberspace. This book is a wonderful, rich and fasinating source of information and inspiration for anyone interested in or working with new media today.
series	other
last changed	2003/04/23 15:14

_id	125a
authors	Dikbas, Attila
year	1999
title	An Evaluating Model for the Usage of Web-based Information Technology in Computer Aided Architectural Design and Engineering Education
doi	https://doi.org/10.52842/conf.ecaade.1999.349
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 349-352
summary	New technologies often reshape expectations, needs and Opportunities so as to develop strategic Plans for the implementation of Information Techniques in education and research. The widespread acceptance of the internet and more specifically the World Wide Web (WWW) has raised the awareness of educators to the potential for online education, virtual classrooms and even virtual universities. With the advent of computer mediated communication, especially the widespread adoption of the web as a publishing medium, educators see the advantages and potential of delivering educational material over the Internet. The Web offers an excellent medium for content delivery with full text, colour graphics support and hyperlinks. The Purpose of this paper is to present a model for the usage of web-based information technology in computer aided architectural design and engineering education. It involves the key features of a full educational system that is capable of offering the teacher and the student flexibility with which to approach their teaching and learning tasks in ways most appropriate to the architectural design and engineering education. Web-based educational system aims at creating quality in on-line educational materials taking collaboration, support, new skills, and, most of all, time. The paper concludes with a discussion of the benefits of such an education system suggesting directions for further work needed to improve the quality of architectural design and engineering education.
keywords	Web-based Information Technology, Online Education, Virtual Campus, Computer Aided Architectural Design, Engineering Education
series	eCAADe
last changed	2022/06/07 07:55

_id	1ead
authors	Dinand, Munevver Ozgur and Ozersay, Fevzi
year	1999
title	CAAD Education under the Lens of Critical Communication Theories and Critical Pedagogy: Towards a Critical Computer Aided Architectural Design Education (CCAADE)
doi	https://doi.org/10.52842/conf.ecaade.1999.086
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 86-93
summary	Understanding the dominant ethos of our age is imperative but not easy. However it is quite evident that new technologies have altered our times. Every discipline is now forced to be critical in developing new concepts according to the realities of our times. Implementing a critical worldview and consciousness is now more essential than ever. Latest changes in information technology are creating pressure on change both in societal and cultural terms. With its direct relation to these technologies, computer aided architectural design education, is obviously an outstanding / prominent case within contemporary debate. This paper aims to name some critical points related to computer aided architectural design education (CAADE) from the perspective of critical communication studies and critical education theories. It tries to relate these three areas, by introducing their common concepts to each other. In this way, it hopes to open a path for a language of critique. A critique that supports and promotes experimentation, negotiation, creativity, social consciousness and active participation in architectural education in general, and CAADE in specific. It suggests that CAADE might become critical and produce meta-discourses [1 ] in two ways. Firstly, by being critical about the context it exists in, that is to say, its relationships to the existing institutional and social structures and secondly by being critical about the content it handles; in other words by questioning its ideological dimensions. This study considers that analysing the role of CAADE in this scheme can provide architectural education with the opportunity to make healthy projections for the future.
keywords	Critical Theories, Critical Pedagogy, Critical CAADE
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2fc7
authors	Forber, U. and Russell, P.
year	1999
title	Interdisciplinary Collaboration in the Virtual Design Studio Design Studio
source	Proceedings of the 17th Annual EAAE Annual Conference, Plymouth UK
summary	Drastic changes in technology and economics currently impact common working structures. Moreover, a fundamental move of western societies from industrial and service oriented societies to information oriented societies can be observed. Like others, the AEC industry is also exposed to the challenge of these fundamental changes, not only regarding an ever growing stock of information on building components and materials, but also because of new methods of collaboration to be applied by all participants. As a result, integrating domain specific knowledge into the design process and conversely, conveying design intentions to domain experts, is meaningful in a constantly growing scale. Utilising advanced technology, a twofold approach in research and education, undertaken at the Institut für Industrielle Bauproduktion (ifib), University of Karlsruhe, is the basis of efforts to create and develop integrating methods of collaboration into the design and planning process. In addition, the integration of AEC practitioners (investors, users, designers, engineers) in the education process provides both drastic changes in the fields of design and construction education of students and a promising approach for life long learning. The focus of this paper is to present the current state of work and to report on experiences gathered during several Virtual Design Studios (VDS) in which multi-disciplinary participants from various Universities and backgrounds were involved. Platforms for the activities are World Wide Web based applications as well as animations, VR, CAD and video conferencing.
series	other
email
last changed	2003/04/23 15:50

_id	993c
authors	Fruchter, Renate
year	1999
title	A/E/C Teamwork: A Collaborative Design and Learning Space
source	Journal of Computing in Civil Engineering -- October 1999 -- Volume 13, Issue 4, pp. 261-269
summary	This paper describes an ongoing effort focused on combined research and curriculum development for multidisciplinary, geographically distributed architecture/engineering/construction (A/E/C) teamwork. Itpresents a model for a distributed A/E/C learning environment and an Internet-based Web-mediated collaboration tool kit. The distributed learning environment includes six universities from Europe, Japan, andthe United States. The tool kit is aimed to assist team members and owners (1) capture and share knowledge and information related to a specific project; (2) navigate through the archived knowledge andinformation; and (3) evaluate and explain the product's performance. The A/E/C course offered at Stanford University acts as a testbed for cutting-edge information technologies and a forum to teach newgenerations of professionals how to team up with practitioners from other disciplines and take advantage of information technology to produce a better, faster, more economical product. The paper presents newassessment metrics to monitor students' cross-disciplinary learning experience and track programmatic changes. The paper concludes with challenges and quandaries regarding the impact of informationtechnologies on team performance and behavior.
series	journal paper
last changed	2003/05/15 21:45

_id	ae38
authors	Jabi, Wassim
year	1999
title	Integrating Databases, Objects and the World-Wide Web for Collaboration in Architectural Design
source	Proceedings of the focus symposium: World Wide Web as Framework for Collaboration in conjunction with the 11th International Conference on Systems Research, Informatics and Cybernetics, The International Institute for Advanced Studies in Systems Research
summary	Architectural design requires specialized vertical knowledge that goes beyond the sharing of marks on paper or the multi-casting of video images. This paper briefly surveys the state-ofthe- art in groupware and outlines the need for vertical and integrated support of synchronous and asynchronous design collaboration. The paper also describes a software prototype (WebOutliner) under development that uses a three-tier persistent object-oriented, web-based technology for a richer representation of hierarchical architectural artifacts using Apple’s WebObjects technology. The prototype contributes to earlier work that defined a framework for a shared workspace consisting of Participants, Tasks, Proposals, and Artifacts. These four elements have been found through observation and analysis to be adequate representations of the essential components of collaborative architectural design. These components are also hierarchical which allows users to filter information, copy completed solutions to other parts of the program, analyze and compare design parameters and aggregate hierarchical amounts. Given its object orientation, the represented artifacts have built-in data and methods that allow them to respond to user actions and manage their own sub-artifacts. In addition, the prototype integrates this technology with Java tools for ubiquitous synchronous web-based access. The prototype uses architectural programming (defining the spatial program of a building) and early conceptual design as examples of seamlessly integrated groupware applications.
keywords	Computer Supported Collaborative Design, WebObjects, Synchronous and Asynchronous Collaboration, Java Applets, Application Server, Web-based Interface
series	other
email
last changed	2002/03/05 19:55

_id	1873
authors	Ji, Guohua and Feng, Jinlong
year	1999
title	Structural Approach to the Organization of Information: A Teaching Experiment at SEU
doi	https://doi.org/10.52842/conf.caadria.1999.153
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 153-159
summary	Design studio still plays a very important role in architectural design education today since teachers and students can exchange their thinking directly. In the whole teaching/learning process, there are a lot of information to be exchanged between the teachers and the students. How to organize the information and record the whole teaching/learning process is very interesting to us. The increasing use of CAD raises some problems with its advantages when the amount of compute-files becomes very big and they are in different formats. In the third year design studio teaching in the academic year 1998/99 at Department of Architecture in Southeast University, we try to use WWW techniques and features to organise the design information. We try to integrate the teaching programme, the project information, the reference material and the students' work together, to record and monitor the teaching process. Since the teaching programme is clearly organised, we could use some strategies and ideas to control the organisation of file storage and presentation. It creates the basis for the further development of applying network to aid the studio teaching.
series	CAADRIA
last changed	2022/06/07 07:52

_id	39cb
authors	Kelleners, Richard H.M.C.
year	1999
title	Constraints in object-oriented graphics
source	Eindhoven University of Technology
summary	In the area of interactive computer graphics, two important approaches to deal with the complexity of designing and implementing graphics systems are object-oriented programming and constraint-based programming. From literature, it appears that combination of these two has clear advantages but has also proven to be difficult. One of the main problems is that constraint programming infringes the information hiding principle of object-oriented programming. The goal of the research project is to combine these two approaches to benefit from the strengths of both. Two research groups at the Eindhoven University of Technology investigate the use of constraints on graphics objects. At the Architecture department, constraints are applied in a virtual reality design environment. At the Computer Science department, constraints aid in modeling 3D animations. For these two groups, a constraint system for 3D graphical objects was developed. A conceptual model, called CODE (Constraints on Objects via Data flows and Events), is presented that enables integration of constraints and objects by separating the object world from the constraint world. In the design of this model, the main aspect being considered is that the information hiding principle among objects may not be violated. Constraint solvers, however, should have direct access to an object’s internal data structure. Communication between the two worlds is done via a protocol orthogonal to the message passing mechanism of objects, namely, via events and data flows. This protocol ensures that the information hiding principle at the object-oriented programming level is not violated while constraints can directly access “hidden” data. Furthermore, CODE is built up of distinct elements, or entity types, like constraint, solver, event, data flow. This structure enables that several special purpose constraint solvers can be defined and made to cooperate to solve complex constraint problems. A prototype implementation was built to study the feasibility of CODE. Therefore, the implementation should correspond directly to the conceptual model. To this end, every entity (object, constraint, solver) of the conceptual model is represented by a separate process in the language MANIFOLD. The (concurrent) processes communicate by events and data flows. The implementation serves to validate the conceptual model and to demonstrate that it is a viable way of combining constraints and objects. After the feasibility study, the prototype was discarded. The gained experience was used to build an implementation of the conceptual model for the two research groups. This implementation encompassed a constraint system with multiple solvers and constraint types. The constraint system was built as an object-oriented library that can be linked to the applications in the respective research groups. Special constructs were designed to ensure information hiding among application objects while constraints and solvers have direct access to the object data. CODE manages the complexity of object-oriented constraint solving by defining a communication protocol to allow the two paradigms to cooperate. The prototype implementation demonstrates that CODE can be implemented into a working system. Finally, the implementation of an actual application shows that the model is suitable for the development of object-oriented software.
keywords	Computer Graphics; Object Oriented Programming; Constraint Programming
series	thesis:PhD
last changed	2003/02/12 22:37

For more results click below: