Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ae38
authors	Jabi, Wassim
year	1999
title	Integrating Databases, Objects and the World-Wide Web for Collaboration in Architectural Design
source	Proceedings of the focus symposium: World Wide Web as Framework for Collaboration in conjunction with the 11th International Conference on Systems Research, Informatics and Cybernetics, The International Institute for Advanced Studies in Systems Research
summary	Architectural design requires specialized vertical knowledge that goes beyond the sharing of marks on paper or the multi-casting of video images. This paper briefly surveys the state-ofthe- art in groupware and outlines the need for vertical and integrated support of synchronous and asynchronous design collaboration. The paper also describes a software prototype (WebOutliner) under development that uses a three-tier persistent object-oriented, web-based technology for a richer representation of hierarchical architectural artifacts using Apple’s WebObjects technology. The prototype contributes to earlier work that defined a framework for a shared workspace consisting of Participants, Tasks, Proposals, and Artifacts. These four elements have been found through observation and analysis to be adequate representations of the essential components of collaborative architectural design. These components are also hierarchical which allows users to filter information, copy completed solutions to other parts of the program, analyze and compare design parameters and aggregate hierarchical amounts. Given its object orientation, the represented artifacts have built-in data and methods that allow them to respond to user actions and manage their own sub-artifacts. In addition, the prototype integrates this technology with Java tools for ubiquitous synchronous web-based access. The prototype uses architectural programming (defining the spatial program of a building) and early conceptual design as examples of seamlessly integrated groupware applications.
keywords	Computer Supported Collaborative Design, WebObjects, Synchronous and Asynchronous Collaboration, Java Applets, Application Server, Web-based Interface
series	other
email
last changed	2002/03/05 19:55

_id	0d5b
authors	Latch Craig, David and Zimring, Craig
year	1999
title	Practical Support for Collaborative Design Involving Divided Interests
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 126-137
doi	https://doi.org/10.52842/conf.acadia.1999.126
summary	Collaboration is common in design, yet relatively little is known about the cognitive reasoning processes that occur during collaboration. This paper discusses collaborative design, emphasizing the elaboration and transformations of the problem search space, and the roles that unstructured verbal communication and graphic communication can play in these processes. The paper discusses a prototype system called the Immersive Discussion Tool (IDT) that supports asynchronous design. IDT allows collaborators to mark-up 3-D models over the Internet using a variety of tools, including diagrammatic marks, dynamic simulations and text annotations. IDT relies on VRML to view the models, with an extensive Java-based interface on the backend powering the interactive construction and playback of graphical annotations, the management of threaded discussions, and the management of file input/output. The development of this tool has revealed the difficulty of constructing complex marks in a virtual 3-D space, and the initial implementation of IDT suggests several strategies for solving these problems.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	221d
authors	Lee, Sanghyun
year	1999
title	Internet-based collaborative design evaluation : an architect's perspective
source	Harvard University
summary	This research aims at developing a design evaluation system that employs a Product Model as the logical basis for integrating building design and construction processes. The system is implemented with Java language, which allows the system to work over the Internet. Accordingly, the system helps architects to collaborate with remote participants. Thus, this design evaluation system is a building performance evaluator like DOE-2, RADIANCE, HVAC, and the Automated Building Code Checker. This research, however, is mainly concerned with an architect's view during the schematic design and design development stage, while the existing design evaluation systems cover other special consultants' views such as those of HVAC designers, structural engineers, and contractors. From an architect's view, this evaluation system checks the compliance of design objects represented by means of physical objects such as walls and windows and conceptual objects such as rooms as well, to the design criteria focused on accommodating human behavior, rather than other building performances such as sustaining building structures and maintaining indoor livability. As such, the system helps designers analyze and evaluate design solutions according to their original intent. The innovative points of this research lie in the following: (1) Unlike other inquiries, it addresses a systematic evaluation of building design from an architect's view focusing on the experiential quality of the built environment. This research demonstrates that such an evaluation becomes available by introducing human activity-based evaluation. (2) It can take a multi-agenda for several groups of different interests by providing an Aspect Model based on human activity-centered systematic translation of their design considerations and 3D model-based graphical representations into system readable ones. (3) As a result, it addresses the possibility of expanding the capability of the design evaluator from a mere code checker to a general design evaluator while simultaneously, enhancing the availability from stand alone to Internet based networking.
keywords	Architectural Rendering; Data Processing; Evaluation; Buildings; Performance; World Wide Web; Internet
series	thesis:PhD
last changed	2003/02/12 22:37

_id	3849
authors	Luttermann, H. and Grauer, M.
year	1999
title	VRML History: Storing And Browsing Temporal 3DWorlds
source	Proceedings of the fourth symposium on the virtual reality modeling language, ACM Press, pp. 153-160
summary	Spatio-temporal data are presented and explored by VR-based visualization systems which offer 3D-navigation and time-navigation for better immersion and analysis. If the visualization results are disseminated on the WWW, they are mostly transformed into videos or, recently, into animated VRML-files which neither support 3D-navigation nor time navigation nor a time-referenced data representation. In this paper, the script language VRML History is proposed which supports the description of spatio-temporal worlds on the internet by conceptually extending VRML with a new time dimension. This is realized by a set of new nodes representing temporal geometries and time references, and a set of Java-classes extending standard VRML-browsers to perform time navigation.
series	other
last changed	2003/04/23 15:14

_id	ga9924
id	ga9924
authors	Cardalda, Juan Jesus Romero J.J.
year	1999
title	Artificial Music Composer
source	International Conference on Generative Art
summary	Traditional Musical Computation Systems had to face the differences between the computational techniques and the characteristics of musical creation. Characteristics such as a high degree of subjectivity, a great irrational component, and a learning process based on the use of examples and environmental absorption, have made music difficult to be formalized through algorithmic methods or classical Artificial Intelligence methods such as Expert Systems. We propose the creation of a cybernetic model of a human composer in a primeval stage of human musical evolution, following a paradigm of cognitive complex models creation, based on the use of the human reference, not only in a static point of view but also considering its evolution through time. Therefore, the proposed system simulates musical creation in one of the first stages of musical evolution, whose main characteristics are the percussive and choral aspects. The system is based on Genetic Algorithms, whose genetic population is integrated by several tribes. This model carries out the task of musical composition, led by the user who expresses his/her musical taste assigning a punctuation to each tribe. The GA selects the worse tribes as individuals to be eliminated. In order to select those tribes which are going to be used as parents, a random function is used, having each tribe a probality proportional to its punctuation. The new tribe is produced by crossing the parent tribes in each individual. Afterwards, mutation takes place in the created individuals. The experiments carried out with this system have proved its functionality in the composition of rhythmic patterns. It is intended to enlarge the experiment's scope by communicating the system via Internet. This would enable its use by users of different musical cultures, taking into account that the system is user-friendly, since it requires no musical knowledge.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ga9921
id	ga9921
authors	Coates, P.S. and Hazarika, L.
year	1999
title	The use of genetic programming for applications in the field of spatial composition
source	International Conference on Generative Art
summary	Architectural design teaching using computers has been a preoccupation of CECA since 1991. All design tutors provide their students with a set of models and ways to form, and we have explored a set of approaches including cellular automata, genetic programming ,agent based modelling and shape grammars as additional tools with which to explore architectural ( and architectonic) ideas.This paper discusses the use of genetic programming (G.P.) for applications in the field of spatial composition. CECA has been developing the use of Genetic Programming for some time ( see references ) and has covered the evolution of L-Systems production rules( coates 1997, 1999b), and the evolution of generative grammars of form (Coates 1998 1999a). The G.P. was used to generate three-dimensional spatial forms from a set of geometrical structures .The approach uses genetic programming with a Genetic Library (G.Lib) .G.P. provides a way to genetically breed a computer program to solve a problem.G. Lib. enables genetic programming to define potentially useful subroutines dynamically during a run .* Exploring a shape grammar consisting of simple solid primitives and transformations. * Applying a simple fitness function to the solid breeding G.P.* Exploring a shape grammar of composite surface objects. * Developing grammarsfor existing buildings, and creating hybrids. * Exploring the shape grammar of abuilding within a G.P.We will report on new work using a range of different morphologies ( boolean operations, surface operations and grammars of style ) and describe the use of objective functions ( natural selection) and the "eyeball test" ( artificial selection) as ways of controlling and exploring the design spaces thus defined.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	993c
authors	Fruchter, Renate
year	1999
title	A/E/C Teamwork: A Collaborative Design and Learning Space
source	Journal of Computing in Civil Engineering -- October 1999 -- Volume 13, Issue 4, pp. 261-269
summary	This paper describes an ongoing effort focused on combined research and curriculum development for multidisciplinary, geographically distributed architecture/engineering/construction (A/E/C) teamwork. Itpresents a model for a distributed A/E/C learning environment and an Internet-based Web-mediated collaboration tool kit. The distributed learning environment includes six universities from Europe, Japan, andthe United States. The tool kit is aimed to assist team members and owners (1) capture and share knowledge and information related to a specific project; (2) navigate through the archived knowledge andinformation; and (3) evaluate and explain the product's performance. The A/E/C course offered at Stanford University acts as a testbed for cutting-edge information technologies and a forum to teach newgenerations of professionals how to team up with practitioners from other disciplines and take advantage of information technology to produce a better, faster, more economical product. The paper presents newassessment metrics to monitor students' cross-disciplinary learning experience and track programmatic changes. The paper concludes with challenges and quandaries regarding the impact of informationtechnologies on team performance and behavior.
series	journal paper
last changed	2003/05/15 21:45

_id	c408
authors	Hirschberg, U., Schmitt, G., Kurmann, D., Kolarevic, B., Johnson, B. and Donath, D.
year	1999
title	The 24 Hour Design Cycle: An Experiment in Design Collaboration over the Internet
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 181-190
doi	https://doi.org/10.52842/conf.caadria.1999.181
summary	This paper describes a Virtual Design Studio exercise involving three academic institutions University - Hong Kong (China), ETH Zurich (Switzerland), and University of Washington, Seattle (USA) - whereby teachers and students, obviously on three different continents and in three different time zones, roughly eight hours apart, were working on a common design project using computer-aided design systems, video-conferencing and a web-based central database that managed and displayed all works throughout the process. The 24 hour design cycle is a metaphor for a more open and international approach to design, facilitated through computer networks. It implies a new form of collective authorship and distributed credits and thus deals with some of the essential challenges and opportunities the internet poses to creative disciplines.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	f3ed
authors	Huang, Jeffrey
year	1999
title	Project Extranets and Distributed Design: The Value of Internet-Based Media for Design Collaboration
source	ACADIA Quarterly, vol. 18, no. 3, pp. 16-18
doi	https://doi.org/10.52842/conf.acadia.1999.016.2
summary	Internet-based project extranets represent a new generation of CAD tools that has been much talked about in the design professions recently. Many believe they hold considerable promise to change dramatically how design participants collaborate in the AEC industry. Yet we are only beginning to understand the real value that such project extranets provide. Clearly, empirical studies of project extranet usage are needed to illuminate the situation. This paper summarizes the results of an explorative study into the implications of such project extranets on design collaboration.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	7c87
authors	Mahdavi, A., Ilal, M.E. Mathew, O., Ries, R. and Suter, G.
year	1999
title	Aspects of S2
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 185-196
summary	We present in this paper the essential aspects of the S2 system. This is the internet realization of SEMPER, an active, multi-domain, space-based, object oriented design environment for integrated building performance modeling. The key features of the S2 environment are as follows: A user can access the system regardless of the computer hardware, operating system or the location on a network; geographically distributed users can asynchronously generate a building model through the user interface; this building model can then be simultaneously evaluated with multiple simulation applications running on remote simulation servers; persistent storage is provided for project data and evaluation results; designers using the system have access to multiple libraries that contain building information such as material data, construction types, schedules, and weather data.
keywords	Building Performance Simulation, Distributed System, Internet
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	6810
authors	Makkonen, Petri
year	1999
title	On multi body systems simulation in product design
source	KTH Stockholm
summary	The aim of this thesis is to provide a basis for efficient modelling and software use in simulation driven product development. The capabilities of modern commercial computer software for design are analysed experimentally and qualitatively. An integrated simulation model for design of mechanical systems, based on four different "simulation views" is proposed: An integrated CAE (Computer Aided Engineering) model using Solid Geometry (CAD), Finite Element Modelling (FEM), Multi Body Systems Modelling (MBS) and Dynamic System Simulation utilising Block System Modelling tools is presented. A theoretical design process model for simulation driven design based on the theory of product chromosome is introduced. This thesis comprises a summary and six papers. Paper A presents the general framework and a distributed model for simulation based on CAD, FEM, MBS and Block Systems modelling. Paper B outlines a framework to integrate all these models into MBS simulation for performance prediction and optimisation of mechanical systems, using a modular approach. This methodology has been applied to design of industrial robots of parallel robot type. During the development process, from concept design to detail design, models have been refined from kinematic to dynamic and to elastodynamic models, finally including joint backlash. A method for analysing the kinematic Jacobian by using MBS simulation is presented. Motor torque requirements are studied by varying major robot geometry parameters, in dimensionless form for generality. The robot TCP (Tool Center Point) path in time space, predicted from elastodynamic model simulations, has been transformed to the frequency space by Fourier analysis. By comparison of this result with linear (modal) eigen frequency analysis from the elastodynamic MBS model, internal model validation is obtained. Paper C presents a study of joint backlash. An impact model for joint clearance, utilised in paper B, has been developed and compared to a simplified spring-damper model. The impact model was found to predict contact loss over a wider range of rotational speed than the spring-damper model. Increased joint bearing stiffness was found to widen the speed region of chaotic behaviour, due to loss of contact, while increased damping will reduce the chaotic range. The impact model was found to have stable under- and overcritical speed ranges, around the loss of contact region. The undercritical limit depends on the gravitational load on the clearance joint. Papers D and E give examples of the distributed simulation model approach proposed in paper A. Paper D presents simulation and optimisation of linear servo drives for a 3-axis gantry robot, using block systems modelling. The specified kinematic behaviour is simulated with multi body modelling, while drive systems and control system are modelled using a block system model for each drive. The block system model has been used for optimisation of the transmission and motor selection. Paper E presents an approach for re-using CAD geometry for multi body modelling of a rock drilling rig boom. Paper F presents synthesis methods for mechanical systems. Joint and part number synthesis is performed using the Grübler and Euler equations. The synthesis is continued by applying the theory of generative grammar, from which the grammatical rules of planar mechanisms have been formulated. An example of topological synthesis of mechanisms utilising this grammar is presented. Finally, dimensional synthesis of the mechanism is carried out by utilising non-linear programming with addition of a penalty function to avoid singularities.
keywords	Simulation; Optimisation; Control Systems; Computer Aided Engineering; Multi Body Systems; Finite Element Method; Backslash; Clearance; Industrial Robots; Parallel Robots
series	thesis:PhD
last changed	2003/02/12 22:37

_id	ga0026
id	ga0026
authors	Ransen, Owen F.
year	2000
title	Possible Futures in Computer Art Generation
source	International Conference on Generative Art
summary	Years of trying to create an "Image Idea Generator" program have convinced me that the perfect solution would be to have an artificial artistic person, a design slave. This paper describes how I came to that conclusion, realistic alternatives, and briefly, how it could possibly happen. 1. The history of Repligator and Gliftic 1.1 Repligator In 1996 I had the idea of creating an “image idea generator”. I wanted something which would create images out of nothing, but guided by the user. The biggest conceptual problem I had was “out of nothing”. What does that mean? So I put aside that problem and forced the user to give the program a starting image. This program eventually turned into Repligator, commercially described as an “easy to use graphical effects program”, but actually, to my mind, an Image Idea Generator. The first release came out in October 1997. In December 1998 I described Repligator V4 [1] and how I thought it could be developed away from simply being an effects program. In July 1999 Repligator V4 won the Shareware Industry Awards Foundation prize for "Best Graphics Program of 1999". Prize winners are never told why they won, but I am sure that it was because of two things: 1) Easy of use 2) Ease of experimentation "Ease of experimentation" means that Repligator does in fact come up with new graphics ideas. Once you have input your original image you can generate new versions of that image simply by pushing a single key. Repligator is currently at version 6, but, apart from adding many new effects and a few new features, is basically the same program as version 4. Following on from the ideas in [1] I started to develop Gliftic, which is closer to my original thoughts of an image idea generator which "starts from nothing". The Gliftic model of images was that they are composed of three components: 1. Layout or form, for example the outline of a mandala is a form. 2. Color scheme, for example colors selected from autumn leaves from an oak tree. 3. Interpretation, for example Van Gogh would paint a mandala with oak tree colors in a different way to Andy Warhol. There is a Van Gogh interpretation and an Andy Warhol interpretation. Further I wanted to be able to genetically breed images, for example crossing two layouts to produce a child layout. And the same with interpretations and color schemes. If I could achieve this then the program would be very powerful. 1.2 Getting to Gliftic Programming has an amazing way of crystalising ideas. If you want to put an idea into practice via a computer program you really have to understand the idea not only globally, but just as importantly, in detail. You have to make hard design decisions, there can be no vagueness, and so implementing what I had decribed above turned out to be a considerable challenge. I soon found out that the hardest thing to do would be the breeding of forms. What are the "genes" of a form? What are the genes of a circle, say, and how do they compare to the genes of the outline of the UK? I wanted the genotype representation (inside the computer program's data) to be directly linked to the phenotype representation (on the computer screen). This seemed to be the best way of making sure that bred-forms would bare some visual relationship to their parents. I also wanted symmetry to be preserved. For example if two symmetrical objects were bred then their children should be symmetrical. I decided to represent shapes as simply closed polygonal shapes, and the "genes" of these shapes were simply the list of points defining the polygon. Thus a circle would have to be represented by a regular polygon of, say, 100 sides. The outline of the UK could easily be represented as a list of points every 10 Kilometers along the coast line. Now for the important question: what do you get when you cross a circle with the outline of the UK? I tried various ways of combining the "genes" (i.e. coordinates) of the shapes, but none of them really ended up producing interesting shapes. And of the methods I used, many of them, applied over several "generations" simply resulted in amorphous blobs, with no distinct family characteristics. Or rather maybe I should say that no single method of breeding shapes gave decent results for all types of images. Figure 1 shows an example of breeding a mandala with 6 regular polygons: Figure 1 Mandala bred with array of regular polygons I did not try out all my ideas, and maybe in the future I will return to the problem, but it was clear to me that it is a non-trivial problem. And if the breeding of shapes is a non-trivial problem, then what about the breeding of interpretations? I abandoned the genetic (breeding) model of generating designs but retained the idea of the three components (form, color scheme, interpretation). 1.3 Gliftic today Gliftic Version 1.0 was released in May 2000. It allows the user to change a form, a color scheme and an interpretation. The user can experiment with combining different components together and can thus home in on an personally pleasing image. Just as in Repligator, pushing the F7 key make the program choose all the options. Unlike Repligator however the user can also easily experiment with the form (only) by pushing F4, the color scheme (only) by pushing F5 and the interpretation (only) by pushing F6. Figures 2, 3 and 4 show some example images created by Gliftic. Figure 2 Mandala interpreted with arabesques Figure 3 Trellis interpreted with "graphic ivy" Figure 4 Regular dots interpreted as "sparks" 1.4 Forms in Gliftic V1 Forms are simply collections of graphics primitives (points, lines, ellipses and polygons). The program generates these collections according to the user's instructions. Currently the forms are: Mandala, Regular Polygon, Random Dots, Random Sticks, Random Shapes, Grid Of Polygons, Trellis, Flying Leap, Sticks And Waves, Spoked Wheel, Biological Growth, Chequer Squares, Regular Dots, Single Line, Paisley, Random Circles, Chevrons. 1.5 Color Schemes in Gliftic V1 When combining a form with an interpretation (described later) the program needs to know what colors it can use. The range of colors is called a color scheme. Gliftic has three color scheme types: 1. Random colors: Colors for the various parts of the image are chosen purely at random. 2. Hue Saturation Value (HSV) colors: The user can choose the main hue (e.g. red or yellow), the saturation (purity) of the color scheme and the value (brightness/darkness) . The user also has to choose how much variation is allowed in the color scheme. A wide variation allows the various colors of the final image to depart a long way from the HSV settings. A smaller variation results in the final image using almost a single color. 3. Colors chosen from an image: The user can choose an image (for example a JPG file of a famous painting, or a digital photograph he took while on holiday in Greece) and Gliftic will select colors from that image. Only colors from the selected image will appear in the output image. 1.6 Interpretations in Gliftic V1 Interpretation in Gliftic is best decribed with a few examples. A pure geometric line could be interpreted as: 1) the branch of a tree 2) a long thin arabesque 3) a sequence of disks 4) a chain, 5) a row of diamonds. An pure geometric ellipse could be interpreted as 1) a lake, 2) a planet, 3) an eye. Gliftic V1 has the following interpretations: Standard, Circles, Flying Leap, Graphic Ivy, Diamond Bar, Sparkz, Ess Disk, Ribbons, George Haite, Arabesque, ZigZag. 1.7 Applications of Gliftic Currently Gliftic is mostly used for creating WEB graphics, often backgrounds as it has an option to enable "tiling" of the generated images. There is also a possibility that it will be used in the custom textile business sometime within the next year or two. The real application of Gliftic is that of generating new graphics ideas, and I suspect that, like Repligator, many users will only understand this later. 2. The future of Gliftic, 3 possibilties Completing Gliftic V1 gave me the experience to understand what problems and opportunities there will be in future development of the program. Here I divide my many ideas into three oversimplified possibilities, and the real result may be a mix of two or all three of them. 2.1 Continue the current development "linearly" Gliftic could grow simply by the addition of more forms and interpretations. In fact I am sure that initially it will grow like this. However this limits the possibilities to what is inside the program itself. These limits can be mitigated by allowing the user to add forms (as vector files). The user can already add color schemes (as images). The biggest problem with leaving the program in its current state is that there is no easy way to add interpretations. 2.2 Allow the artist to program Gliftic It would be interesting to add a language to Gliftic which allows the user to program his own form generators and interpreters. In this way Gliftic becomes a "platform" for the development of dynamic graphics styles by the artist. The advantage of not having to deal with the complexities of Windows programming could attract the more adventurous artists and designers. The choice of programming language of course needs to take into account the fact that the "programmer" is probably not be an expert computer scientist. I have seen how LISP (an not exactly easy artificial intelligence language) has become very popular among non programming users of AutoCAD. If, to complete a job which you do manually and repeatedly, you can write a LISP macro of only 5 lines, then you may be tempted to learn enough LISP to write those 5 lines. Imagine also the ability to publish (and/or sell) "style generators". An artist could develop a particular interpretation function, it creates images of a given character which others find appealing. The interpretation (which runs inside Gliftic as a routine) could be offered to interior designers (for example) to unify carpets, wallpaper, furniture coverings for single projects. As Adrian Ward [3] says on his WEB site: "Programming is no less an artform than painting is a technical process." Learning a computer language to create a single image is overkill and impractical. Learning a computer language to create your own artistic style which generates an infinite series of images in that style may well be attractive. 2.3 Add an artificial conciousness to Gliftic This is a wild science fiction idea which comes into my head regularly. Gliftic manages to surprise the users with the images it makes, but, currently, is limited by what gets programmed into it or by pure chance. How about adding a real artifical conciousness to the program? Creating an intelligent artificial designer? According to Igor Aleksander [1] conciousness is required for programs (computers) to really become usefully intelligent. Aleksander thinks that "the line has been drawn under the philosophical discussion of conciousness, and the way is open to sound scientific investigation". Without going into the details, and with great over-simplification, there are roughly two sorts of artificial intelligence: 1) Programmed intelligence, where, to all intents and purposes, the programmer is the "intelligence". The program may perform well (but often, in practice, doesn't) and any learning which is done is simply statistical and pre-programmed. There is no way that this type of program could become concious. 2) Neural network intelligence, where the programs are based roughly on a simple model of the brain, and the network learns how to do specific tasks. It is this sort of program which, according to Aleksander, could, in the future, become concious, and thus usefully intelligent. What could the advantages of an artificial artist be? 1) There would be no need for programming. Presumbably the human artist would dialog with the artificial artist, directing its development. 2) The artificial artist could be used as an apprentice, doing the "drudge" work of art, which needs intelligence, but is, anyway, monotonous for the human artist. 3) The human artist imagines "concepts", the artificial artist makes them concrete. 4) An concious artificial artist may come up with ideas of its own. Is this science fiction? Arthur C. Clarke's 1st Law: "If a famous scientist says that something can be done, then he is in all probability correct. If a famous scientist says that something cannot be done, then he is in all probability wrong". Arthur C Clarke's 2nd Law: "Only by trying to go beyond the current limits can you find out what the real limits are." One of Bertrand Russell's 10 commandments: "Do not fear to be eccentric in opinion, for every opinion now accepted was once eccentric" 3. References 1. "From Ramon Llull to Image Idea Generation". Ransen, Owen. Proceedings of the 1998 Milan First International Conference on Generative Art. 2. "How To Build A Mind" Aleksander, Igor. Wiedenfeld and Nicolson, 1999 3. "How I Drew One of My Pictures: or, The Authorship of Generative Art" by Adrian Ward and Geof Cox. Proceedings of the 1999 Milan 2nd International Conference on Generative Art.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	cf4d
authors	Zamanian, M.K. and Pittman, J.H.
year	1999
title	A software industry perspective on AEC information models for distributed collaboration
source	Automation in Construction 8 (3) (1999) pp. 237-248
summary	This paper focuses on information modeling and computing technologies that are most relevant to the emerging software for the Architecture, Engineering, and Construction (AEC) industry. After a brief introduction to the AEC industry and its present state of computer-based information sharing and collaboration, a set of requirements for AEC information models are identified. Next, a number of key information modeling and standards initiatives for the AEC domain are briefly discussed followed by a review of the emerging object and Internet technologies. The paper will then present our perspective on the challenges and potential directions for using object-based information models in a new generation of AEC software systems intended to offer component-based open architecture for distributed collaboration.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	3017
authors	Carson, J. and Clark, A.
year	1999
title	Multicast Shared Virtual Worlds Using VRML 97
source	Proceedings of VRML 99 Fourth Symposium on the Virtual Reality Modeling language, The Association for Computing Machinery, Inc. New York, pp. 133-140
summary	This paper describes a system for authoring and executing shared virtual worlds within existing VRML97 viewers such as Cosmo Player. As VRML97 does not contain any direct support for the construction of virtual worlds containing multiple users extensions are presented to provide support for shared behaviours, avatars and objects that can be manipulated and carried by participants in the world; these extensions are pre-processed into standard VRML97 and Java. A system infrastructure is described which allows worlds to be authored and executed within the context of the World Wide Web and the MBone. CR Categories and Subject Descriptors: C.2.2 [Computer Communication Networks]: Network Protocols - Applications; C.2.4 [Computer Communication Networks]: Distributed Sys- tems - Distributed Applications; H.5.1 [Information Interfaces and Presentation] Multimedia Information Systems - Artificial, Aug- mented and Virtual Realities; 1.3.2 [Computer Graphics]: Graphics Systems - Distributed/network graphics: 1.3.6 [Computer Graph- ics]: Methodology and Techniques - Interaction Techniques; 1.3.7 [Computer Graphics]: Three Dimensional Graphics and Realism - Virtual Reality.
series	other
last changed	2003/04/23 15:50

_id	6024
authors	McCall, Raymond
year	1999
title	A Web-centric CAD System for Collaborative Design
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 65-79
summary	Web-PHIDIAS is a hypermedia-based, intelligent CAD system that delivers both CAD functionality and design information to anyone with Web access. This system is above all designed to facilitate collaborative architectural design. It provides both private (individual) and collaborative (group) drawing and text authoring spaces, with a variety of types of authoring and viewing privileges for groups. This enables a single designer to work in privacy on one piece of a design and later "publish" it to a supervisor or a group. It also enables a group to work in privacy and later publish its work to a different or larger group. This notion of "levels of privacy/publication" is a crucial but too- often missing component of collaborative design systems. With WebPHIDIAS, all drawings are stored in a central repository accessible from the group server. This means that they are accessible from anywhere in the world to any viewer who has the required viewing and/or authoring privileges. This enables designers to access and modify stored drawings while travelling or when out on the site, even if the site is in another country. It also enables them to create new drawings and store them in the central repository from anywhere in the world. Web-PHIDIAS consists of an interactive Web-based client that serves as an interface to the PHIDIAS hypermedia server. This client, which is implemented in Java, provides basic, 2D graphical editing functionality and as well as display of 3D views. It also provides access to multimedia information useful for whatever design task is at hand. This information includes text and graphical descriptions of design precedents as well as various issues in design of a particular type of building.
keywords	Net-Centric, Web-Centric, Hypertext, Hypermedia, CAD, HyperCAD, Knowledge-Based Critics, Collaboration, Executable Content, Argumentative Design, IBIS, PHI, Design Rationale
series	CAAD Futures
last changed	2006/11/07 07:22

_id	41d4
authors	Medjdoub, Benachir
year	1999
title	Interactive 2D Constraint-Based Geometric Construction System
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 197-212
summary	This paper presents a 2D Constraint-Based Geometric Construction System where positioning and manipulating geometry is very precise. An unusually simple interface makes this system particularly interactive and easy to use. In our approach, the geometry types supported are: points, lines, circles, ellipses, circular arcs and b-spline curves. All the fundamental topologic constraints, i.e. tangent, parallel, perpendicular, coincident and concentric, are provided. Metric constraints, i.e. dividing the shapes into equal parts or fixing the geometric parameters, are also provided. These constraints are automatically applied by the application in response to the implied intentions of the end- user. Dynamic modifications of partially dimensioned models are supported, whereby the design is modified while enforcing the constraints. A graph-constructive approach is used to solve the model. As we are dealing with partial modifications, this resolution technique is quite sufficient, and makes our system stable and flexible. Our approach focuses highly on interactivity. Positioning a shape constrained to another is made directly through the graphic interface. Constraint relaxation is also done by direct manipulations. Modifications are made by dragging the geometry, or by typing into a numerical panel displaying the free shape parameters. Again, existing constraints are maintained as those numbers are applied. Well -constrained and under-constrained problems are discussed. This approach was developed in Java, JDK 3.0.1 of SGI's Java software.
keywords	Sketching, Geometric Constraints, Interactivity, Geometric construction, Dynamic Modifications
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	9f59
authors	Qian, Dongqiu and Gross, Mark D.
year	1999
title	Collaborative Design with NetDraw
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 213-226
summary	The paper describes NetDraw, a Java-based object oriented drawing program that employs a server-client architecture to provide a shared drawing environment for collaborative design. NetDraw goes beyond conventional shared whiteboard applications in its support for concurrency control, groups and constraints, and ephemeral gesture objects. Small and simple enough that users can learn it quickly, NetDraw is designed to run on small platforms such as handheld computers. We describe NetDraw's features and an early evaluation of its use.
keywords	Synchronous Collaboration, Shared Drawing.
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	1570
authors	Sowizral, H.A. and Deering, M.F.
year	1999
title	The Java 3D API and Virtual Reality
source	IEEE Computer Graphics and Applications, May/June
summary	Java 3D proves a natural choice for any Java programmer wanting to write an interactive 3D graphics program. A programmer constructs a scene graph containing graphic objects, lights, sounds, environmental effects objects, and behavior objects that handle interactions or modify other objects in the scene graph. The programmer then hands that scene graph to Java 3D for execution. Java 3D starts rendering objects and executing behaviors in the scene graph. Virtual reality applications go through an identical writing process. However, before a user can use such an application, Java 3D must additionally know about the user's physical characteristics (height, eye separation, and so forth) and physical environment (number of displays, their location, trackers, and so on). Not surprisingly, such information varies from installation to installation and from user to user. So Java 3D lets application developers separate their application's operation from the vagaries of the user's final display environment. The Java 3D application programmer's interface (API) provides a very flexible platform for building a broad range of graphics applications. Developers have already used Java 3D to build applications in a variety of domains including mechanical CAD, molecular visualization, scientific visualization, animation previews, geographic information systems, business graphics, 3D logos, and educational offerings. Virtual reality applications have included immersive workbench applications, headtracked shutter-glass-based desktop applications, and portals (a cave-like room with multiple back-projected walls).
series	journal paper
last changed	2003/04/23 15:50

_id	8fe9
authors	Terzidis, Kostas
year	1999
title	Experiments on Morphing Systems
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 149-151
summary	This paper presents recent experiments on 3D morphing of buildings. A genealogical tree is created out of cross-morphing buildings showing their children and grandchildren. The resulting children-buildings share characteristics of the formal properties of their parents. There are two methods used here to morph buildings: face-to-face mapping and object-to-object mapping. All morphed buildings are shown as real-time animation. A series of experiments will be presented. Some experiments investigate the implementation of architecture or art theories. For example, how would it look like to morph a Hedjuk building into a Le Corbusier building? How would the resulting child look like in a cubist world? Or how would a building look like as it is extrapolated beyond its target and instead of lines and points it is represented as letters and colors? The computer system that was developed by the author for this paper is called "zhapes" and is a Java-based 3D-experimentation system. It resides at the address http://www.cda.ucla.edu/caad/java/x/formProj2/formB.html where it can be downloaded for explorations.
series	SIGRADI
email
last changed	2016/03/10 10:01

For more results click below: