Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 593

Reformat results as: short short into frame detailed detailed into frame

_id	8a3d
authors	Peng, Chengzhi
year	1999
title	Flexible generic frameworks and multidisciplinary synthesis of built form
source	Design Studies 20 (6) (1999) pp. 537-551
summary	This paper presents an explanatory study of teamwork in architectural design where team members of different disciplines collaborate to achieve a coherent architectural whole. The study shows that some kind of flexible generic frameworks can be employed to sustain group dynamism through a project's lifetime. Along with our case studies, properties of teamwork-sustaining frameworks are analysed. An overview of the recent development of computer-based collaborative drawing and design support tools is given. To support more effectively the complexity and spontaneity observed in our current study of multidisciplinary collaborative architectural design, an outline of a pilot collaborative modelling environment is presented.
series	journal paper
last changed	2003/05/15 21:45

_id	d423
authors	Arvin, Scott A. and House, Donald H.
year	1999
title	Making Designs Come Alive: Using Physically Based Modeling Techniques in Space Layout Planning
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 245-262
summary	This paper introduces the concept of responsive design. It elaborates this concept as an approach to free form, adaptable, automated design applying physically based modeling techniques to the design process. Our approach attempts to bridge the gap between totally automated design and the free form brainstorming designers normally employ. We do this by automating the initial placement and sizing of design elements, with an interactive engine that appears alive and highly responsive. We present a method for applying these techniques to architectural space layout planning, and preliminary implementation details for a prototype system for developing rectangular, two-dimensional, single- story floor plans.
keywords	Physically Based Space Layout, Physically Based Design, Responsive Design, Space Layout Planning, Computer-aided Design, Human-computer Interaction
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	99ce
authors	Forowicz, T.
year	1999
title	Modeling of energy demands for residential buildings with HTML interface
source	Automation in Construction 8 (4) (1999) pp. 481-487
summary	This paper presents the package for calculation of energy and cost demands for heating, cooling and hot water. The package represents a new kind of approach to developing software, employing user (client) and server (program provider) computers connected by Internet. It is mounted on the owner server and is available to the whole world through the Web browser. The package was developed as a simplified tool for estimating energy use in four types of new and old houses, located in 900 US cities. The computing engine utilizes the database that was compiled by LBL in support of the 'Affordable Housing through Energy Conservation' Project with over 10000 DOE-2.1 simulations. The package consists of 69 routines and scripts coded in four languages: HTML, Perl, C, and FORTRAN. The modeling, the programming, and the future perspectives of the new kind of computational tool are presented. The paper discusses further technical limitations, as well as suggestions for further improvements and development. Especially important is the problem of multi-user access; ways for its solution are proposed.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	acadia06_426
id	acadia06_426
authors	Garber, R., Robertson, N.
year	2006
title	The Pleated Cape: From the Mass-Standardization of Levittown to Mass Customization Today
doi	https://doi.org/10.52842/conf.acadia.2006.426
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 426-439
summary	In the 1950’s, the Levitts put mass-production and the reverse assembly line into use in the building of thousands of single-family houses. However, the lack of variation that made their construction process so successful ultimately produced a mundane suburban landscape of sameness. While there were many attempts to differentiate these Levitt Cape Cods, none matched the ingenuity of their original construction process. The notion of mass-customization has been heavily theorized since the 1990’s, first appearing in the field of management and ultimately finding its way into the field of architecture. Greg Lynn used mass-customization in his design for the Embryological House in which thousands of unique houses could be generated using biological rules of differentiation (Lynn 1999). Other industries have embraced the premise that computer-numerically-controlled technologies allow for the production of variation, though it has not been thoroughly studied in architecture. While digital fabrication has been integral in the realization of several high-profile projects, the notion of large-scale mass-customization in the spec-housing market has yet to become a reality. Through the execution of an addition to a Cape Cod-style house, we examine the intersection between prefabricated standardized panels and digital fabrication to produce a mass-customized approach to housing design. Through illustrations and a detailed description of our design process, we will show how digital fabrication technologies allow for customization of mass produced products.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	803c
authors	Gottfried, A., Angelis, E. De and Trani, M.L.
year	1999
title	Results from the application of a performance-based housing regulation in Cadoneghe, Italy
source	Automation in Construction 8 (4) (1999) pp. 445-453
summary	The article aims to report the experience of a little town, Cadoneghe (suburbs of Padua, northern Italy), in managing a Performance based Building Code. Although pressed by a high housing demand, Cadoneghe asked a design team and a research team for a help to define new basic rules and control tools, to avoid the most usual failures of Italian mass housing projects. The administration pursued the application of these rules in four stages:
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	bsct_islami
id	bsct_islami
authors	Islami, Agron
year	2007
title	A Systematic Approach to Thermal Adaptation of Detached Single Family Buildings in Kosovo
source	Vienna University of Technology; Building Science & Technology
summary	The research focuses on thermal behaviour of non-insulated single detached family units in the region of Kosovo. The region has experienced a massive construction of illegal housing especially after the conflict of 1999. Such construction resulted in poor thermal behaviour of the houses due to the lack of insulation. The poor thermal behaviour resulted in degradation of thermal comfort for the inhabitants of the houses. This phenomenon occurs due to energy savings to heat the house or more accurately, a specific part of the house. The simulation is based on parametric studies in an hourly basis to compute the thermal behavior of three specific houses. The first simulation is performed on a non-insulated house whereas the other simulations are performed with improved thermal insulation in order to understand the importance of a thermal envelope and its impact in this type of houses. The generated results emphasize the energy savings if thermal envelope is improved in existing houses. Simulation program “TAS” was used to extract figures and numbers related to the cases.The research aims to inform the local population on possibilities for increasing the thermal performances of their houses by improvement of the thermal envelope. It raises the quality of living in their dwellings as well as the quality of the environment, subject to a considerable degradation caused by pollution, generated by the outworn power thermal power plants in Kosovo.
keywords	Building performance, Non-insulated house, Thermal comfort, Heating, Parametric calculations
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	399e
authors	Kaga, A., Nakahama, K., Hamada, S., Yamaguchi, S., Yamanishi, H. and Sasada, T.
year	1999
title	Collaborative Design System for Citizen Participation in Planning Public Road Projects
doi	https://doi.org/10.52842/conf.caadria.1999.225
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 225-234
summary	The realization of smooth execution of public street enterprise and good communication with inhabitants needs the way of easy and right explanation which the inhabitants understand the street planning, and the scheme of administration and inhabitants make the nice housing environment together. In this paper, the street planing presentation system for inhabitants established by using computer graphics. The applicability of the presentation system is made clear using in the real project.
series	CAADRIA
last changed	2022/06/07 07:52

_id	65b4
authors	Kos, Jose Ripper
year	1999
title	Architecture and Hyperdocument: Data Shaping Space
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 462-465
summary	The computer interface can't convey the hole experience of walking through a city or a building. Nevertheless, the complexity of all the aspects involved in those threedimensional spaces can be better understood through the non-linearity of the hyperdocument. Each dweller of a city and a building has many layers of relationship with both. The sequence and the extent each observer explores the space is unique. It’s not totally apprehended in a first visit. As the observer knows better that space, his experience changes. A similar situation takes place in a multimedia application. Hence, it's possible to build an analogy between the architectonic or urban structure and a hyperdocument navigation structure. We can also state that the computer is critical to create paths of architectural information through space and time. The 3D model of a city is a powerful basis to structure the hyperdocument navigation. The city can be viewed in separate parts or layers of information. One investigates the city through different aspects of its configuration and explores it in different scales and levels of detail. The images generated from this 3D model can be combined with video, photo, sound and text, organizing the information which gives form to the city. The navigation through this information, addresses the citty by its economy, housing, religion, politics, leisure, projects, symbolic buildings, and other aspects. This paper will discuss these issues through the experiments of the research done at the School of Architecture and Urbanism of the Universidade Federal do Rio de Janeiro. The research group at the "Laboratory of Urban Analysis and Digital Representation" in PROURB (Graduate Program of Urbanism) analyses the city and its buildings using CD-ROMs and websites.
keywords	3D City Modeling, Hyperdocument, Multimedia, Architecture, Urbanism
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ef83
authors	Liu, A.M.M.
year	1999
title	Residential satisfaction in housing estates: a Hong Kong perspective
source	Automation in Construction 8 (4) (1999) pp. 511-524
summary	Post-occupancy evaluation (POE) has been developed to address the problem of acquiring feedback from the occupants who are, arguably, in the best position to provide information for a future design database. This paper presents a study of the factors (on both physical and social levels), which influence residential satisfaction of a sample of occupants in a chosen residential area in Hong Kong; factor analysis and multiple regression were carried out on the data. A comparison is also made of the perceived factors of dissatisfaction amongst the public and private housing occupants. It is suggested that a wider systematic coverage of the subject through investigative and diagnostic POE should be carried out in Hong Kong.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	4aa9
authors	Roberts, Andrew
year	1999
title	Virtual Site Planning
doi	https://doi.org/10.52842/conf.ecaade.1999.442
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 442-447
summary	This paper looks at the potential for the Virtual Reality to be used as a medium for the development of teaching tools in Architectural and Urban Design Education. It identifies examples and lessons learned from the development of teaching tools in other disciplines. The paper outlines a prototype system developed at Cardiff University to help Town Planning students understand the three dimensional nature of site planning and design. This was developed following difficulties encountered by students in using CAD which was seen as insufficiently intuitive to allow effective use within the short timespan available. The prototype system allows students to access their site through the familiar environment of a Web Browser. A number of 'Standard' house types are available which can be selected and inserted into the design space. Once in the space the houses can be viewed in three dimensions, moved and rotated in order to form any configuration that the students may wish. The system is easily customisable; it need not be limited to uses in urban design, but could be used in many situations where component parts are arranged in space.
keywords	Virtual Reality, Teaching, Learning, Site Planning
series	eCAADe
email
more	http://ctiweb.cf.ac.uk/Housing/
last changed	2022/06/07 07:56

_id	504a
authors	Rodrigo Alvarado, García
year	1999
title	Design-Based on VR-Modeling of Environemntal Conditions
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 126-129
summary	The research on CAD has been looking for a long time a creative contribution to architectural design, including recently the use of virtual-reality as an immersive modeling system, but without much practical results. However, contemporary architecture is increasingly including digital characteristics based more on cultural influences than on the use of electronic tools. This shows an evolution of the discipline in relation to digital media and apparently distant from environmental concerns. But the works and reflexions reveal a common convergence in the role of body in architecture as a pivot between virtual and local dimension of design. Based on that relationship we propose to take advantage of virtual-reality for modeling environmental conditions of the location in order to guide architectural design, using for example the potential of representing characteristics not visible in reality or to simulate time cycles. Sun displacement, wind direction, temperature ranges, topography and landscape are specific conditions in design that define energy consumption and human comfort. Such characteristics can establish optimal shapes crossing the different variables with timelines. VR-modeling and interactive control allow an spatial evaluation of environmentally efficient forms. That is showed through an exercise of housing in different locations of Chile. This merger between digital media and ecological concerns represents a crossing of contemporary cultural trends to motivate exploration of new geometries, supported on the potential of technology and on sustainable human development
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	c0c4
authors	Smith, Timothy M.
year	1999
title	Suisse Telekom Headquarters Norton, Virginia
doi	https://doi.org/10.52842/conf.acadia.1999.x.v8t
source	ACADIA Quarterly, vol. 18, no. 3, p. 6
summary	The design problem called for a mixed-use facility housing a bookstore, a secure telecommunications relay facility with training and conference areas, and a private employee fitness center. The site is at the end of the main street in Norton just off the main highway, and is where a four-story hotel project was abandoned twenty years prior. The structural steel frame for the hotel was erected and construction halted at this stage, leaving the skeletal frame and an empty lot at the end of the axis of the main street in Norton. Norton began as a coalmining town but has recently gained attention as a telecommunications hub after a national telecommunications firm located their TDD headquarters in Norton, making use of the fiber optic lines available in the area.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	993c
authors	Fruchter, Renate
year	1999
title	A/E/C Teamwork: A Collaborative Design and Learning Space
source	Journal of Computing in Civil Engineering -- October 1999 -- Volume 13, Issue 4, pp. 261-269
summary	This paper describes an ongoing effort focused on combined research and curriculum development for multidisciplinary, geographically distributed architecture/engineering/construction (A/E/C) teamwork. Itpresents a model for a distributed A/E/C learning environment and an Internet-based Web-mediated collaboration tool kit. The distributed learning environment includes six universities from Europe, Japan, andthe United States. The tool kit is aimed to assist team members and owners (1) capture and share knowledge and information related to a specific project; (2) navigate through the archived knowledge andinformation; and (3) evaluate and explain the product's performance. The A/E/C course offered at Stanford University acts as a testbed for cutting-edge information technologies and a forum to teach newgenerations of professionals how to team up with practitioners from other disciplines and take advantage of information technology to produce a better, faster, more economical product. The paper presents newassessment metrics to monitor students' cross-disciplinary learning experience and track programmatic changes. The paper concludes with challenges and quandaries regarding the impact of informationtechnologies on team performance and behavior.
series	journal paper
last changed	2003/05/15 21:45

_id	a25e
authors	Loy, Hollis A.
year	1999
title	Foundation for a Thorough CAAD Education
doi	https://doi.org/10.52842/conf.ecaade.1999.301
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 301-308
summary	The birth and development of computing is considered by most as one of the greatest technological achievements of the twentieth century. Since the integration of computers in the built environment, over two decades ago, computing methods developed into efficient designing and calculating tools. In contrast, accelerating advancements in computing technology have created generation gaps amongst architects. There are inexperienced, novice, intermediate and advanced computer-capable architects. If each group was asked to define CAAD, some would still describe it as a computer program for technical draughting. Others may define CAAD (Computer Aided Architectural Design) as a vast array of digital media in CAD, multimedia and DTP, assisting architects in compiling visual presentations. Currently, most architectural schools are capable of instructing most, if not all, facets of CAAD (2D & 3D CAD, model rendering, photo montage, brochure layouts, etc.). However, this knowledge is accumulated at random throughout the course of study. "Computer Graphics for Architects" is the latest educational development in Europe bridging generation gaps with senior architects and serving as an introductory CAAD seminar to beginning architecture students. This book and lecture presents a gallery of recent architectural CAD, multimedia, and DTP presentations practiced in Europe´s second largest architectural firm. The terminology is user-friendly and its content concentrates on responding to the most often posed questions by CAAD beginners relating to: (1) Terminology (2) Appearance (3) Time Consumption (4) Cost Techniques introduced are independent of any platform. The goal is to summarize quickly and effectively the countless possibilities of presentations applicable in architecture practice. "Computer Graphics for Architects" provides a direction for future presentations and motivates students to excel in CAAD.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	046b
authors	Martens, Bob
year	1999
title	Education in Computer Aided Architectural Design in Europe
doi	https://doi.org/10.52842/conf.ecaade.1999.761
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 761-769
summary	The aim and object of this account is to elaborate on the role of eCAADe within the present worldwide "CAAD-activities". Each of the associations dedicated to the field of CAAD has taken its very own course of development, many cases of overlap and interaction have resulted, some of them, however, merely based on personal contacts. The purpose of eCAADe is to promote the sharing of ideas and collaboration in matters relating to Computer Aided Architectural Design. This, jointly drafted paper outlines these global aims within a worldwide context. The eCAADe umbrella covers both Europe and its periphery. Including the Middle East and North Africa. Though this does not apply as a kind of "territorial claim ", the primary affiliation of regions to at least one of the current international associations is sought. Historically, the early eighties are to be regarded as the period of first encounters with computers of larger proportions of people involved in architecture, simultaneously with the rise of personal computers. Thus various university sites acted as the forerunners in this field. Implementation of CAAD in teaching and research soon called for channeling the exchanges of experience via a suitable platform. The founding of ACADIA (the North American Organisation) in 1981, however, seems to have set the stage, as shortly thereafter the foundations for a European movement were laid.
series	eCAADe
email
more	http:www.ecaade.org
last changed	2022/06/07 07:59

_id	473d
authors	Maver, Tom and Petric, Jelena
year	1999
title	Virtual Heritage: Is There a Future for the Past?
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 482-487
summary	This paper attempts an overview of the contribution which emerging information technologies - viz CAD, Multimedia, Virtual Reality and the Internet - can make to the presentation, understanding and preservation of the rich architectural heritage which exists (pro-term) in almost every cultural context. In the UK, the growing interest in sites such as Stonehenge has, through the threat of greater physical presence, increasingly kept the public at bay - a curious paradox which Virtual Reality (VR) has the potential to address. Virtual Reality (-an overly used and underly understood term-) is an information technology which can provide a convincing experience of environments which: i) exist, but are too remote, costly or hazardous, to visit. ii) don't yet exist but are planned, such as architectural designs or urban plans. iii) never will exist, other than in the imagination. iv) existed in the past and are now threatened or already lost. // This paper has its focus on the latter category, i.e. what is now becoming known as Virtual Heritage (VH), but it puts VH in the context of the broader spectrum of simulated experiences of past, present and future environments of cultural significance. The paper draws largely on the work of ABACUS, the Architecture and Building Aids Computer Unit, Strathclyde. The examples of the application of IT to VH include: i) a virtual reality experience of Historic Scotland's premier historical site: Skara Brae, the most complete neolithic settlement in Northern Europe. ii) a multimedia CD-ROM featuring some 50 of the most wonderful interiors of Glasgow's architectural treasures. iii) a computer based archive of rare and normally inaccessible 17C and 18C drawings of Scottish buildings from three seminal sources. iv) a massive 3-D model of Glasgow (some 10,000 buildings located on the hilly terrain of the city), which is now accessible on the Internet. // The paper concludes with conjectures based on the examples given of how emerging information technologies can help secure a future for the past.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	29c6
authors	Shaw, N. and Kimber, W.E.
year	1999
title	STEP and SGML/XML: what it means, how it works
source	XML Europe ‘99 Conference Proceedings, Graphic Communication Association, 1999, pp. 267-70
summary	The STEP standard, ISO 10303, is the primary standard for data representation and interchange in the product design and manufacturing world. Originally designed to enable the interchange of 3-D CAD models between different systems, like SGML, it has defined and uses a general mechanism for representing and managing complex data of any type. Increasingly products are defined as solid models that are stored in product databases. These databases are not limited to shape but contain a considerable wealth of other information, such as materials, failure modes, task descriptions, product related meta-data such as approvals and much more. The product world is of course also replete with documents, from requirements through specifications to user manuals. These documents both act as input to the product development processes and are output as well. Indeed in some cases documents form part of the product and are given part numbers. It is therefore not surprising to find that there are many companies where there are very real requirements to interact and interoperate between the product data and documents, specifically in the form of SGML-based data. This paper reports on work in progress to bring the two worlds together. This is primarily being done through the SGML and Industrial Data Preliminary Work Item under ISO TC184/SC4. The need for common capabilities for using STEP and SGML together has been obvious for a long time as can be seen from the inclusion of product data and SGML-based data within initiatives such as CALS. However, until recently, this requirement was never satisfied, for various reasons. For the last year or more, a small group has been actively pursuing this area and gaining the necessary understandings across the different standards. It is this work that is reported here. The basic thrust of the work is to answer the questions: Can STEP and SGML be used together and, if so, how?
series	other
last changed	2003/04/23 15:50

_id	642a
authors	Stacey, Michael
year	1999
title	Digital Design and the Architecture of Brookes Stacey Randall
doi	https://doi.org/10.52842/conf.acadia.1999.001.2
source	ACADIA Quarterly, vol. 18, no. 1, pp. 1-9
summary	I am an architect who has the experience of using computers. A user and not an expert in digital design, therefore what follows is a foot soldier's report from my practice over the past 10 to 11 years, including the role of computers in our approach to creating architecture. I began my working life tending IBM mainframes for the British Shoe Corporation. The two IBM mainframe computers were state of the art computer technology of the mid 1970's. There were two as one was used, and the other we needed for backup. The developments in computing in terms of size, increase in storage capacity and faster processing speed over the past 30 years, is a technological acceleration which is difficult to visualize. The IBM historian in the UK suggested "that if cars had developed in the same way they would be given away free with corn flakes". A frightening thought as our cities grind under the pressure of increased car ownership. British Shoe Corporation also had a reserve system some sixty miles away and a halon extinguishing system in case of fire - such was the capital and commercial value of the system. We carried out transitional computing for a number of European countries. The CAD was limited - pen potters drawing shoes, drawing them less well than an average A level or high school student! My interest was primarily in art and not computers; my aim to earn enough to tour Europe to see key work 'in the flesh' not just in reproduction.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	e978
authors	[Zupancic] Strojan, Tadeja Z.
year	1999
title	CyberUniversity
doi	https://doi.org/10.52842/conf.ecaade.1999.196
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 196-200
summary	The study of a cyberuniversity derives from an analogy between real urban space and its virtual "substitution". It represents an attempt to balance some views, which seems to be contrary, exclusive, but they are just parts of the same wholeness. Especially the notion of a cyber society is lately considered such an exaggeration, that it is possible to forget the meaning of a real life experience and interactions, which are already threatened. One should contribute to the awarness that is used in such a comparison, it is "just" an analogy, not a real similarity. At the same time it is possible to point out some limitations of a cyberspace and indicate a more realistic view of the meaning of cyber communities. Awarness of the development processes could help to find a balance between reality and virtuality, using cyberfacilities not to destroy us (our identity) but to improve the quality of our (real) life.
keywords	University, Cyberuniversity, Space, Cyberspace
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	bacd
authors	Abadí Abbo, Isaac
year	1999
title	APPLICATION OF SPATIAL DESIGN ABILITY IN A POSTGRADUATE COURSE
source	Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 75-82
summary	Spatial Design Ability (SDA) has been defined by the author (1983) as the capacity to anticipate the effects (psychological impressions) that architectural spaces or its components produce in observers or users. This concept, which requires the evaluation of spaces by the people that uses it, was proposed as a guideline to a Masters Degree Course in Architectural Design at the Universidad Autonoma de Aguascalientes in Mexico. The theory and the exercises required for the experience needed a model that could simulate spaces in terms of all the variables involved. Full-scale modeling as has been tested in previous research, offered the most effective mean to experiment with space. A simple, primitive model was designed and built: an articulated ceiling that allows variation in height and shape, and a series of wooden panels for the walls and structure. Several exercises were carried out, mainly to experience cause -effect relationships between space and the psychological impressions they produce. Students researched into spatial taxonomy, intentional sequences of space and spatial character. Results showed that students achieved the expected anticipation of space and that full-scale modeling, even with a simple model, proved to be an effective tool for this purpose. The low cost of the model and the short time it took to be built, opens an important possibility for Institutions involved in architectural studies, both as a research and as a learning tool.
keywords	Spatial Design Ability, Architectural Space, User Evaluation, Learning, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:27

For more results click below: