Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 629

Reformat results as: short short into frame detailed detailed into frame

_id	6d88
authors	Achten, Henri H. and Van Leeuwen, Jos P.
year	1999
title	Feature-Based High Level Design Tools - A Classification
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 275-290
summary	The VR-DIS project aims to provide design support in the early design stage using a Virtual Reality environment. The initial brief of the design system is based on an analysis of a design case. The paper describes the process of analysis and extraction of design knowledge and design concepts in terms of Features. It is demonstrated how the analysis has lead to a classification of design concepts. This classification forms one of the main specifications for the VR-based design aid system that is being developed in the VR-DIS programme. The paper concludes by discussing the particular approach used in the case analysis and discusses future work in the VR-DIS research programme.
keywords	Features, Feature-Based modelling, Architectural Design, Design Process, Design Support
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	8c4f
authors	Emdanat, Samir S. and Vakalo, Emmanuel-G.
year	1999
title	An Experiment in Using Virtual Reality to Teach Compositional Principles to Beginning Students
doi	https://doi.org/10.52842/conf.caadria.1999.325
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 325-333
summary	This paper introduces an experiment in using educational toys as a means for teaching compositional principles to architectural students using: (1) a traditional model-based approach and (2) "BlocksWorld" a computer-based system that utilizes immersive virtual reality technologies. The paper discusses the general nature of the exercise and its objectives and illustrates some of the resulting student projects. Then it introduces an approach to implementing an interactive virtual design environment that is based on this exercise.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	2fc7
authors	Forber, U. and Russell, P.
year	1999
title	Interdisciplinary Collaboration in the Virtual Design Studio Design Studio
source	Proceedings of the 17th Annual EAAE Annual Conference, Plymouth UK
summary	Drastic changes in technology and economics currently impact common working structures. Moreover, a fundamental move of western societies from industrial and service oriented societies to information oriented societies can be observed. Like others, the AEC industry is also exposed to the challenge of these fundamental changes, not only regarding an ever growing stock of information on building components and materials, but also because of new methods of collaboration to be applied by all participants. As a result, integrating domain specific knowledge into the design process and conversely, conveying design intentions to domain experts, is meaningful in a constantly growing scale. Utilising advanced technology, a twofold approach in research and education, undertaken at the Institut für Industrielle Bauproduktion (ifib), University of Karlsruhe, is the basis of efforts to create and develop integrating methods of collaboration into the design and planning process. In addition, the integration of AEC practitioners (investors, users, designers, engineers) in the education process provides both drastic changes in the fields of design and construction education of students and a promising approach for life long learning. The focus of this paper is to present the current state of work and to report on experiences gathered during several Virtual Design Studios (VDS) in which multi-disciplinary participants from various Universities and backgrounds were involved. Platforms for the activities are World Wide Web based applications as well as animations, VR, CAD and video conferencing.
series	other
email
last changed	2003/04/23 15:50

_id	5689
authors	Garcia Alvarado, Rodrigo, Hempel Holzapfel, Ricardo and Parra, Juan Carlos
year	1999
title	Virtual Design for Innovative Timber Structures
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 319-326
summary	The major timber structures have great efficiency and beauty, but not many use in buildings due difficulties to represent and resolve theirs geometrical complexity, regulated by several constructive rules. The spatial richness and attractive of these structures can be a contribution in architecture, and encourage the use of wood. For aid the design and impels innovative solutions we are developing a computer system to program the geometrical regulations and allow a tridimensional visualization of different models with virtual-reality devices. First we are studing the architectural morphology and design process of structures more typically used; beams, trusses, frames and arcs. Establishing theirs proportions, distribution, shapes alternatives and the computational algorithm. In other hand we are evaluating the 3D-visualization in the innovation of designs. Some students of architecture developed in a virtual- system small projects based on other projects designed with traditional media. The models were compare by a panel of professors, considering overall quality and creativity. The results of that experience shows advantages in geometrical innovation, specially in organic shapes user-centered instead of orthogonal compositions. But also some constructive fails, which is necessary to support with related procedures.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	c408
authors	Hirschberg, U., Schmitt, G., Kurmann, D., Kolarevic, B., Johnson, B. and Donath, D.
year	1999
title	The 24 Hour Design Cycle: An Experiment in Design Collaboration over the Internet
doi	https://doi.org/10.52842/conf.caadria.1999.181
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 181-190
summary	This paper describes a Virtual Design Studio exercise involving three academic institutions University - Hong Kong (China), ETH Zurich (Switzerland), and University of Washington, Seattle (USA) - whereby teachers and students, obviously on three different continents and in three different time zones, roughly eight hours apart, were working on a common design project using computer-aided design systems, video-conferencing and a web-based central database that managed and displayed all works throughout the process. The 24 hour design cycle is a metaphor for a more open and international approach to design, facilitated through computer networks. It implies a new form of collective authorship and distributed credits and thus deals with some of the essential challenges and opportunities the internet poses to creative disciplines.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	39cb
authors	Kelleners, Richard H.M.C.
year	1999
title	Constraints in object-oriented graphics
source	Eindhoven University of Technology
summary	In the area of interactive computer graphics, two important approaches to deal with the complexity of designing and implementing graphics systems are object-oriented programming and constraint-based programming. From literature, it appears that combination of these two has clear advantages but has also proven to be difficult. One of the main problems is that constraint programming infringes the information hiding principle of object-oriented programming. The goal of the research project is to combine these two approaches to benefit from the strengths of both. Two research groups at the Eindhoven University of Technology investigate the use of constraints on graphics objects. At the Architecture department, constraints are applied in a virtual reality design environment. At the Computer Science department, constraints aid in modeling 3D animations. For these two groups, a constraint system for 3D graphical objects was developed. A conceptual model, called CODE (Constraints on Objects via Data flows and Events), is presented that enables integration of constraints and objects by separating the object world from the constraint world. In the design of this model, the main aspect being considered is that the information hiding principle among objects may not be violated. Constraint solvers, however, should have direct access to an object’s internal data structure. Communication between the two worlds is done via a protocol orthogonal to the message passing mechanism of objects, namely, via events and data flows. This protocol ensures that the information hiding principle at the object-oriented programming level is not violated while constraints can directly access “hidden” data. Furthermore, CODE is built up of distinct elements, or entity types, like constraint, solver, event, data flow. This structure enables that several special purpose constraint solvers can be defined and made to cooperate to solve complex constraint problems. A prototype implementation was built to study the feasibility of CODE. Therefore, the implementation should correspond directly to the conceptual model. To this end, every entity (object, constraint, solver) of the conceptual model is represented by a separate process in the language MANIFOLD. The (concurrent) processes communicate by events and data flows. The implementation serves to validate the conceptual model and to demonstrate that it is a viable way of combining constraints and objects. After the feasibility study, the prototype was discarded. The gained experience was used to build an implementation of the conceptual model for the two research groups. This implementation encompassed a constraint system with multiple solvers and constraint types. The constraint system was built as an object-oriented library that can be linked to the applications in the respective research groups. Special constructs were designed to ensure information hiding among application objects while constraints and solvers have direct access to the object data. CODE manages the complexity of object-oriented constraint solving by defining a communication protocol to allow the two paradigms to cooperate. The prototype implementation demonstrates that CODE can be implemented into a working system. Finally, the implementation of an actual application shows that the model is suitable for the development of object-oriented software.
keywords	Computer Graphics; Object Oriented Programming; Constraint Programming
series	thesis:PhD
last changed	2003/02/12 22:37

_id	ab9c
authors	Kvan, Thomas and Kvan, Erik
year	1999
title	Is Design Really Social
source	International Journal of Virtual Reality, 4:1
summary	There are many who will readily agree with Mitchell's assertion that "the most interesting new directions (for computer-aided design) are suggested by the growing convergence of computation and telecommunication. This allows us to treat designing not just as a technical process... but also as a social process." [Mitchell 1995]. The assumption is that design was a social process until users of computer-aided design systems were distracted into treating it as a merely technical process. Most readers will assume that this convergence must and will lead to increased communication between design participants, that better social interaction leads to be better design. The unspoken assumption appears to be that putting the participants into an environment with maximal communication channels will result in design collaboration. The tools provided, therefore, must permit the best communication and the best social interaction. We see a danger here, a pattern being repeated which may lead us into less than useful activities. As with several (popular) architectural design or modelling systems already available, however, computer system implementations all too often are poor imitations manual systems. For example, few in the field will argue with the statement that the storage of data in layers in a computer-aided drafting system is an dispensable approach. Layers derive from manual overlay drafting technology [Stitt 1984] which was regarded as an advanced (manual) production concept at the time many software engineers were specifying CAD software designs. Early implementations of CAD systems (such as RUCAPS, GDS, Computervision) avoided such data organisation, the software engineers recognising that object-based structures are more flexible, permitting greater control of data editing and display. Layer-based systems, however, are easier to implement in software, more familiar to the user and hence easier to explain, initially easier to use but more limiting for an experienced and thoughtful user, leading in the end to a lesser quality in resultant drawings and significant problems in output control (see Richens [1990], pp. 31-40 for a detailed analysis of such features and constraints). Here then we see the design for architectural software faithfully but inappropriately following manual methods. So too is there a danger of assuming that the best social interaction is that done face-to-face, therefore all collaborative design communications environments must mimic face-to-face.
series	journal paper
email
last changed	2003/05/15 10:29

_id	5222
authors	Moloney, Jules
year	1999
title	Bike-R: Virtual Reality for the Financially Challenged
doi	https://doi.org/10.52842/conf.ecaade.1999.410
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 410-413
summary	This paper describes a 'low tech' approach to producing interactive virtual environments for the evaluation of design proposals. The aim was to produce a low cost alternative to such expensive installations as CAVE virtual reality systems. The system utilises a library of pre-rendered animation, video and audio files and hence is not reliant on powerful hardware to produce real time simulation. The participant sits astride a bicycle exercise machine and animation is triggered by the pedal revolution. Navigation is achieved by steering along and around the streets of the animated design. This project builds on the work of Desmond Hii. ( Hii, 1997) The innovations are the bicycle interface and the application to urban scale simulation.
keywords	Virtual, Design, Interface, Urban
series	eCAADe
email
last changed	2022/06/07 07:58

_id	504a
authors	Rodrigo Alvarado, García
year	1999
title	Design-Based on VR-Modeling of Environemntal Conditions
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 126-129
summary	The research on CAD has been looking for a long time a creative contribution to architectural design, including recently the use of virtual-reality as an immersive modeling system, but without much practical results. However, contemporary architecture is increasingly including digital characteristics based more on cultural influences than on the use of electronic tools. This shows an evolution of the discipline in relation to digital media and apparently distant from environmental concerns. But the works and reflexions reveal a common convergence in the role of body in architecture as a pivot between virtual and local dimension of design. Based on that relationship we propose to take advantage of virtual-reality for modeling environmental conditions of the location in order to guide architectural design, using for example the potential of representing characteristics not visible in reality or to simulate time cycles. Sun displacement, wind direction, temperature ranges, topography and landscape are specific conditions in design that define energy consumption and human comfort. Such characteristics can establish optimal shapes crossing the different variables with timelines. VR-modeling and interactive control allow an spatial evaluation of environmentally efficient forms. That is showed through an exercise of housing in different locations of Chile. This merger between digital media and ecological concerns represents a crossing of contemporary cultural trends to motivate exploration of new geometries, supported on the potential of technology and on sustainable human development
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	7b68
authors	Shounai, Y., Morozumi, M., Homma , R. and Murakami, Y.
year	1999
title	On the Development of Group Work CAD for Network PC: GW-CAD III
doi	https://doi.org/10.52842/conf.ecaade.1999.473
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 473-481
summary	The number of Virtual Design Studio experiments that use a Digital Pin-up Board (WWW) and video conferencing tools is rapidly increasing. As we see that several schools have introduced group-ware to support asynchronous communication of their projects, it is possible to regard that techniques for asynchronous communication have already been developed to some extent. However, participants of those projects still have difficulty with synchronous communication. For example, though designers often desire to exchange models among members to get critical feedback and achieve fast problem solving while working at their desks, there are few CADs that can support concurrent synchronous design communication among members. The first half of this paper discusses a model of synchronous design communication that uses CAD models, and then proposes a prototype of tools that use Microsoft NetMeeting and AutoCAD R14: GW-CAD III. In the middle, a user interface system that enables designers to conveniently model and exchange separate sets of models necessary to elaborate different aspects of design is proposed: "Network Clipboard" "Modeling Space", "Plan Face", and "Section Face". Finally, this paper discusses the results of several experiments that used the prototype.
keywords	Synchronous Collaboration, Internet, CAD, Prototype, Schematic Design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	2aaa
authors	Vásquez de Velasco, Guillermo and Hutchison, David
year	1999
title	Virtual Reality Meets Telematics: Design and Development of the Infinity Room
doi	https://doi.org/10.52842/conf.ecaade.1999.466
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 466-472
summary	The paper presents the findings of three years of experimentation in the use of compressed videoconferencing in international virtual design studios. Based on these findings, the authors elaborate on the development of a new videoconferencing interface: "The Infinity Room". The Infinity Room is a design studio space containing a floor-to-ceiling rear projection screen wall that conceals a dark room equipped with 5 video cameras and 4 video projectors that reproduce, on one-to-one scale, the images captured in a similar installation at a remote location. Operationally, the video cameras feed a computer that eliminate image redundancies, codes all the sources into a single entity and sends it as a compressed video signal to a remote computer that decodes and decompresses the images for synchronized delivery through the video projectors. The tiling effect of 4 synchronized and fully interactive video images creates the illusion of an adjacent room. The paper describes the design parameters used in the development of the Infinity Room and elaborates on the technology that makes it feasible. Requirements and constraints on physical space, hardware, software, and networking are discussed. The paper ends with conclusions that highlight the technical feasibility of building a small-scale prototype.
keywords	Virtual Design Studio (VDS), Virtual Reality (VR), Telematics, Videoconferencing, Collaborative Design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	dd16
authors	Gibson, Kathleen
year	1999
title	STUDIO @ CORNELL
doi	https://doi.org/10.52842/conf.acadia.1999.018.2
source	ACADIA Quarterly, vol. 18, no. 2, pp. 18-21
summary	Unique to the interior design program at Cornell University is a planned pedagogical approach requiring equal emphasis toward manual and digital graphic communication at the freshman level. Prior to 1998, computer-based instruction only occurred at the junior year of study. Recognizing that cultural and symbolic biases against digital media were formally being instituted by curriculum policy, faculty searched for a new perspective. Central to success was the removal of illogically placed boundaries, both mental and physical. In response, students are now encouraged to cultivate a fluid dexterity between traditional and digital methods, at times using various skills concurrently for design analysis and representation (Figures 1, 2, 3, 4, 5, 6, 7). Course content for DEA115 ranges from basic orthographic drafting, paraline projection, and perspective drawing to color rendering and composition. Students utilize a full range of media: pencil, ink, marker, pastel, AutoCAD, 3DS/ MAX, and Photoshop in this graphics studio. Course meetings total six contact hours per week, constituting a three credit hour class. Assignments are purposefully created to shatter digital myths. For example, instead of a standard, rote drafting exercise, AutoCAD is used to explore design ideas through systemic object manipulation (Figures 8, 9).
series	ACADIA
last changed	2022/06/07 07:51

_id	4b48
authors	Dourish, P.
year	1999
title	Where the Footprints Lead: Tracking down other roles for social navigation
source	Social Navigation of Information Space, eds. A. Munro, K. H. and D Benyon. London: Springer-Verlag, pp 15-34
summary	Collaborative Filtering was proposed in the early 1990's as a means of managing access to large information spaces by capturing and exploiting aspects of the experiences of previous users of the same information. Social navigation is a more general form of this style of interaction, and with the widening scope of the Internet as an information provider, systems of this sort have rapidly moved from early research prototypes to deployed services in everyday use. On the other hand, to most of the HCI community, the term social navigation" is largely synonymous with "recommendation systems": systems that match your interests to those of others and, on that basis, provide recommendations about such things as music, books, articles and films that you might enjoy. The challenge for social navigation, as an area of research and development endeavour, is to move beyond this rather limited view of the role of social navigation; and to do this, we must try to take a broader view of both our remit and our opportunities. This chapter will revisit the original motivations, and chart something of the path that recent developments have taken. Based on reflections on the original concerns that motivated research into social navigation, it will explore some new avenues of research. In particular, it will focus on two. The first is social navigation within the framework of "awareness" provisions in collaborative systems generally; and the second is the relationship of social navigation systems to spatial models and the ideas of "space" and "place" in collaborative settings. By exploring these two ideas, two related goals can be achieved. The first is to draw attention to ways in which current research into social navigation can be made relevant to other areas of research endeavour; and the second is to re-motivate the idea of "social navigation" as a fundamental model for collaboration in information-seeking."
series	other
last changed	2003/04/23 15:50

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	e719
authors	Achten, Henri and Turksma, Arthur
year	1999
title	Virtual Reality in Early Design: the Design Studio Experiences
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 327-335
summary	The Design Systems group of the Eindhoven University of Technology started a new kind of design studio teaching. With the use of high-end equipment, students use Virtual Reality from the very start of the design process. Virtual Reality technology up to now was primarily used for giving presentations. We use the same technology in the design process itself by means of reducing the time span in which one gets results in Virtual Reality. The method is based on a very brief cycle of modelling in AutoCAD, assigning materials in 3DStudio Viz, and then making a walkthrough in Virtual Reality in a standard landscape. Due to this cycle, which takes about 15 seconds, the student gets immediate feedback on design decisions which facilitates evaluation of the design in three dimensions much faster than usual. Usually the learning curve of this kind of software is quite steep, but with the use of templates the number of required steps to achieve results is reduced significantly. In this way, the potential of Virtual Reality is not only explored in research projects, but also in education. This paper discusses the general set-up of the design studio and shows how, via short workshops, students acquire knowledge of the cycle in a short time. The paper focuses on the added value of using Virtual Reality technology in this manner: improved spatial reasoning, translation from two-dimensional to three-dimensional representations, and VR feedback on design decisions. It discusses the needs for new design representations in this design environment, and shows how fast feedback in Virtual Reality can improve the spatial design at an early stage of the design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	4d95
authors	Alvarado, Rodrigo Garcia and Maver, Tom
year	1999
title	Virtual Reality in Architectural Education: Defining Possibilities
doi	https://doi.org/10.52842/conf.acadia.1999.007
source	ACADIA Quarterly, vol. 18, no. 4, pp. 7-9
summary	Introduction: virtual reality in architecture Virtual Reality (VR) is an emergent computer technology for full 3D-simulations, which has a natural application in the architectural work, due that activity involves the complete definition of buildings prior to its construction. Although the profession has a long tradition and expertise in the use of 2D-plans for the design of buildings, the increasing complexity of projects and social participation requires better media of representation. However, the technological promise of Virtual Reality involves many sophisticated software and hardware developments. It is based on techniques of 3D-modelling currently incorporated in the majority of drawing software used in architecture, and also there are several tools for rendering, animation and panoramic views, which provide visual realism. But other capabilities like interactivity and sense of immersion are still complex, expensive and under research. These require stereoscopic helmets, 3D pointers and trackers with complicated configurations and uncomfortable use. Most advanced installations of Virtual-Reality like CAVEs involve much hardware, building space and restrictions for users. Nevertheless, diverse developers are working in Virtual-Reality user-friendly techniques and there are many initial experiences of architectural walk-throughs showing advantages in the communication and development of designs. Then we may expect an increasing use of Virtual Reality in architecture.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	f154
authors	Amor, Robert and Newnham, Leonard
year	1999
title	CAD Interfaces to the ARROW Manufactured Product Server
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 1-11
summary	The UK national project ARROW (Advanced Reusable Reliable Objects Warehouse) provides an Internet based framework through which it is possible to identify any of a range of manufactured products meeting specific design criteria. This open framework (based upon the IAI's IFCs) provides a mechanism for users to search for products from any participating manufacturer or supplier based both on specific attributes of a product or on any of the textual descriptions of the product. The service returns the closest matching products and allows the user to navigate to related information including manufacturer, suppliers, CAD details, VR displays, installation instructions, certificates, health and safety information, promotional information, costings, etc. ARROW also provides a toolkit to enable manufacturers and suppliers to more easily map and publish their information in the format utilised by the ARROW system. As part of the ARROW project we have examined the ability to interface from a design tool through to ARROW to automatically retrieve information required by the tool. This paper describes the API developed to allow CAD and simulation tools to communicate directly with ARROW and identify appropriate manufactured information. The demonstration system enables CAD systems to identify the closest matching manufactured product to a designed product and replacing the designed product with the details supplied by the manufacturer for the manufactured product as well as pulling through product attributes utilised by the design application. This paper provides a description of the ARROW framework and issues faced in providing information based upon standards as well as containing information not currently modelled in public standards. The paper looks at issues of enabling manufacturers and suppliers to move from their current world-view of product information to a more data-rich and user accessible information repository (even though this enables a uniform comparison across a range of manufacturer's products). Finally the paper comments on the likely way forward for ARROW like systems in providing quality information to end users.
keywords	Computer-aided Design, Product Retrieval
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	d423
authors	Arvin, Scott A. and House, Donald H.
year	1999
title	Making Designs Come Alive: Using Physically Based Modeling Techniques in Space Layout Planning
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 245-262
summary	This paper introduces the concept of responsive design. It elaborates this concept as an approach to free form, adaptable, automated design applying physically based modeling techniques to the design process. Our approach attempts to bridge the gap between totally automated design and the free form brainstorming designers normally employ. We do this by automating the initial placement and sizing of design elements, with an interactive engine that appears alive and highly responsive. We present a method for applying these techniques to architectural space layout planning, and preliminary implementation details for a prototype system for developing rectangular, two-dimensional, single- story floor plans.
keywords	Physically Based Space Layout, Physically Based Design, Responsive Design, Space Layout Planning, Computer-aided Design, Human-computer Interaction
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	f317
authors	Arvin, Scott A. and House, Donald H.
year	1999
title	Modeling Architectural Design Objectives in Physically Based Space Planning
doi	https://doi.org/10.52842/conf.acadia.1999.212
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 212-225
summary	Physically based space planning is a means for automating the conceptual design process by applying the physics of motion to space plan elements. This methodology provides for a responsive design process, which allows a designer to easily make decisions whose consequences immediately propagate throughout the design. It combines the speed of automated design methods with the flexibility of manual design methods, while adding a highly interactive quality and a sense of collaboration with the design itself. In our approach, the designer creates a space plan by specifying and modifying graphic design objectives rather than by directly manipulating primitive geometry. The plan adapts to the changing state of objectives by applying the physics of motion to its elements. For design objectives to have an effect on a physically based space plan, they need to be able to apply appropriate forces to space plan elements. Space planning can be separated into two problems, determining topological properties and determining geometric properties. Design objectives can then be categorized as topological or geometric objectives. Topological objectives influence the location of individual spaces, affecting how one space relates to another. Geometric objectives influence the size and shape of space boundaries, affecting the dimensions of individual walls. This paper focuses on how to model a variety of design objectives for use in a physically based space planning system. We describe how topological objectives, such as adjacency and orientation, can be modeled to apply forces to space locations, and how geometric objectives, such as area, proportion, and alignment, can be modeled to apply forces to boundary edges.
series	ACADIA
email
last changed	2022/06/07 07:54

For more results click below: