CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 626

_id f851
authors Ramasubramanian, Pattanaik and Greenberg
year 1999
title A perceptually based physical error metric for realistic image synthesis
source Alyn Rockwood, editor, SIGGRAPH 99 Conference Proceedings, Annual Conference Series, ACM SIGGRAPH, Addison Wesley
summary We introduce a new concept for accelerating realistic image synthesis algorithms. At the core of this procedure is a novel physical error metric that correctly predicts the perceptual threshold for detecting artifacts in scene features. Built into this metric is a computational model of the human visual system's loss of sensitivity at high background illumination levels, high spatial frequencies, and high contrast levels (visual masking). An important feature of our model is that it handles the luminance-dependent processing and spatiallydependent processing independently. This allows us to precompute the expensive spatially-dependent component, making our model extremely efficient. We illustrate the utility of our procedure with global illumination algorithms used for realistic image synthesis. The expense of global illumination computations is many orders of magnitude higher than the expense of direct illumination computations and can greatly benefit by applying our perceptually based technique. Results show our method preserves visual quality while achieving significant computational gains in areas of images with high frequency texture patterns, geometric details, and lighting variations.
series other
last changed 2003/04/23 15:50

_id ecaade2014_041
id ecaade2014_041
authors Gabriel Wurzer, Bob Martens and Thomas Grasl
year 2014
title ProceeDings - A web-based word processor automating the production of conference proceedings
doi https://doi.org/10.52842/conf.ecaade.2014.1.011
source Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 11-20
wos WOS:000361384700001
summary In this paper an online editing system for eCAADe papers is presented, which is also the technology behind this proceedings volume. On the occasion of the eCAADe 1999 conference in Liverpool, a novel layout for the proceedings was developed. In the course of forthcoming annual conferences, this became the distinctive “look and feel” of the eCAADe proceedings. Due to the complexity, professional typesetting was required for and the authors were disconnected from the publication and layout stage. This paper elaborates on the development and implementation of a web-based tool, which takes care of the typesetting and delegates this activity again to the authors. Neither software installation is required, nor specific training must be completed in advance. On top of this the degree of homogeneity can be raised significantly, thus supporting the editors in charge to concentrate on the task of harmonising the resulting publication output.
keywords Word processing; proceedings preparation; cloud computing
series eCAADe
email
last changed 2022/06/07 07:50

_id cf2011_p109
id cf2011_p109
authors Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year 2011
title Automated Cost Analysis of Concept Design BIM Models
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords building information modeling, interoperability, cost analysis, IFC
series CAAD Futures
email
last changed 2012/02/11 19:21

_id 295d
authors Amor, R.W., Hosking, J.G. and Mugridge, W.B.
year 1999
title ICAtect-II: a framework for the integration of building design tools
source Automation in Construction 8 (3) (1999) pp. 277-289
summary The development of a system capable of integrating a range of building design tools poses many challenges. Our framework for integrating design tools provides a structured approach, allowing individual parts to be developed independently. In this paper, we describe the overall framework and suggest a method for modeling and implementing each portion of the framework. Furthermore, we illustrate how such a system can integrate several design tools and be realized as a functional design system.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:22

_id d423
authors Arvin, Scott A. and House, Donald H.
year 1999
title Making Designs Come Alive: Using Physically Based Modeling Techniques in Space Layout Planning
source Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 245-262
summary This paper introduces the concept of responsive design. It elaborates this concept as an approach to free form, adaptable, automated design applying physically based modeling techniques to the design process. Our approach attempts to bridge the gap between totally automated design and the free form brainstorming designers normally employ. We do this by automating the initial placement and sizing of design elements, with an interactive engine that appears alive and highly responsive. We present a method for applying these techniques to architectural space layout planning, and preliminary implementation details for a prototype system for developing rectangular, two-dimensional, single- story floor plans.
keywords Physically Based Space Layout, Physically Based Design, Responsive Design, Space Layout Planning, Computer-aided Design, Human-computer Interaction
series CAAD Futures
email
last changed 2006/11/07 07:22

_id acac
authors Chan, Chiu-Shui, and Browning, Todd R.
year 1999
title Design Simulation
doi https://doi.org/10.52842/conf.caadria.1999.243
source CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 243-252
summary This paper intends to explore methods of constructing a design simulator. Two methodologies, approached differently, imitate the human design processes. The first component is an algorithmic method which has a cognitive model embedded. This cognitive model hypothesizes that human design has certain design logic applied. The design rationales are based on knowledge stored in a designer_ memory. Each time a similar design task is encountered, the same design procedures will be repeated for completion. What makes the results different are the design information used and sequences of processing it. A kitchen design using procedural algorithms is developed to simulate this design aspect. The second component simulates an intuitive design approach. Intuition is defined as design by rules of thumb, or heuristic design. This study investigated how to simulate an intuitive design process. The method involves building up a set of inductive rules symbolizing cultural aspects that need to be addressed in a design. A residential foyer design is the simulation task. The driving force is the heuristics. Results in this study have shown that there are many variables to include but impossible to capture and simulate any of the design processes, which are the reasons why studies in this area are difficult.
series CAADRIA
email
more http://www.public.iastate.edu/~cschan
last changed 2022/06/07 07:56

_id avocaad_2001_02
id avocaad_2001_02
authors Cheng-Yuan Lin, Yu-Tung Liu
year 2001
title A digital Procedure of Building Construction: A practical project
source AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series AVOCAAD
email
last changed 2005/09/09 10:48

_id 84e8
authors Cohen, J.M., Markosian, L., Zeleznik, R.C., Hughes, J.F. and Barzel, R.
year 1999
title An Interface for Sketching 3D Curves
source ACM Symposium on Interactive 3D Graphics, pp. 17-22 (April 1999). ACM SIGGRAPH. Edited by Jessica Hodgins and James D. Foley
summary The ability to specify nonplanar 3D curves is of fundamental importance in 3D modeling and animation systems. Effective techniques for specifying such curves using 2D input devices are desirable, but existing methods typically require the user to edit the curve from several viewpoints. We present a novel method for specifying 3D curves with 2D input from a single viewpoint. The user rst draws the curve as it appears from the current viewpoint, and then draws its shadow on the oor plane. The system correlates the curve with its shadow to compute the curve's 3D shape. This method is more natural than existing methods in that it leverages skills that many artists and designers have developed from work with pencil and paper.
series other
last changed 2003/04/23 15:14

_id groot_ddssar0221
id groot_ddssar0221
authors De Groot, E.H.
year 1999
title Integrated Lighting System Assistant
source Eindhoven University of Technology
summary The aim of the design project described in this thesis is to design a tool to support the building design process. Developing a design is considered to be a wicked problem because it goes beyond reasonable or predictable limits. Consequently, in this design project we address two wicked problems simultaneously: a double wicked problem. The two wicked problems concerned are the design of Design Decision Support System [DDSS] and the conceptual design of office lighting systems. To get a handle on the first wicked problem, two workshops were organised to meet the possible future users and to create a common basis for the tool to be developed. To tackle the wickedness of the second problem, an office lighting model and performance evaluation method were developed and implemented in a new prototype computer system: Integrated Lighting System Assistant [ILSA]. The workshops have proven to be a good source of feedback and an essential link to daily practice. The ILSA prototype shows that it is possible to implement the lighting model and evaluation method into a working prototype that can support architects in making decisions for the early design stage in the field of integrating daylight and artificial lighting.
series thesis:PhD
more http://www.bwk.tue.nl/fago/AIO/ellie/
last changed 2003/12/16 07:16

_id 6be9
authors Guo, Haoxu
year 1999
title The Realization of Intelligent Aid to CAD of Architectural Design with the Object-Oriented Method
doi https://doi.org/10.52842/conf.caadria.1999.443
source CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 443-454
summary The object-oriented analysis and design has been the principal technology of software development since the 90s and intellectualization has been the direction of development for CAD software in the architectural design. An investigation is made on the application of the object-oriented technology to the realization of the intellectualization of the CAD for architectural design.
keywords Object-oriented; CAD for Architectural Design, Intelligent Technology, Design Expert System, Object, Visual-Computing Integration, Parameter Drive, Polymorphism, Inherit, Correlated Operation
series CAADRIA
last changed 2022/06/07 07:50

_id b578
authors Kawasumi, Norihiro and Yamaguchi, Shigeyuki
year 1999
title A Study of Design Information System for Network Collaboration
doi https://doi.org/10.52842/conf.caadria.1999.191
source CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 191-199
summary In this paper, we discuss about the architectural design collaboration and information management based on the worldwide network. Internet and WWW are rapidly infiltrating through the architectural schools in the world, so it is easy to communicate and share the design information with web homepage and e-mail. But, a set of homepage and e-mail is not sufficient for easy and smooth design. Because of the data management method and system for network collaboration is not yet well organized nor well developed. In this paper, we report the results of two Virtual Design Studio projects that we have experienced and intend to analyze the problems to exchange and share the design information on the web. Then we propose the collaborative design system environment and evaluate it from the result of the experimental third Virtual Design Studio project that we have executed.
series CAADRIA
more http://archigraf.archi.kit.ac.jp/
last changed 2022/06/07 07:52

_id 6810
authors Makkonen, Petri
year 1999
title On multi body systems simulation in product design
source KTH Stockholm
summary The aim of this thesis is to provide a basis for efficient modelling and software use in simulation driven product development. The capabilities of modern commercial computer software for design are analysed experimentally and qualitatively. An integrated simulation model for design of mechanical systems, based on four different "simulation views" is proposed: An integrated CAE (Computer Aided Engineering) model using Solid Geometry (CAD), Finite Element Modelling (FEM), Multi Body Systems Modelling (MBS) and Dynamic System Simulation utilising Block System Modelling tools is presented. A theoretical design process model for simulation driven design based on the theory of product chromosome is introduced. This thesis comprises a summary and six papers. Paper A presents the general framework and a distributed model for simulation based on CAD, FEM, MBS and Block Systems modelling. Paper B outlines a framework to integrate all these models into MBS simulation for performance prediction and optimisation of mechanical systems, using a modular approach. This methodology has been applied to design of industrial robots of parallel robot type. During the development process, from concept design to detail design, models have been refined from kinematic to dynamic and to elastodynamic models, finally including joint backlash. A method for analysing the kinematic Jacobian by using MBS simulation is presented. Motor torque requirements are studied by varying major robot geometry parameters, in dimensionless form for generality. The robot TCP (Tool Center Point) path in time space, predicted from elastodynamic model simulations, has been transformed to the frequency space by Fourier analysis. By comparison of this result with linear (modal) eigen frequency analysis from the elastodynamic MBS model, internal model validation is obtained. Paper C presents a study of joint backlash. An impact model for joint clearance, utilised in paper B, has been developed and compared to a simplified spring-damper model. The impact model was found to predict contact loss over a wider range of rotational speed than the spring-damper model. Increased joint bearing stiffness was found to widen the speed region of chaotic behaviour, due to loss of contact, while increased damping will reduce the chaotic range. The impact model was found to have stable under- and overcritical speed ranges, around the loss of contact region. The undercritical limit depends on the gravitational load on the clearance joint. Papers D and E give examples of the distributed simulation model approach proposed in paper A. Paper D presents simulation and optimisation of linear servo drives for a 3-axis gantry robot, using block systems modelling. The specified kinematic behaviour is simulated with multi body modelling, while drive systems and control system are modelled using a block system model for each drive. The block system model has been used for optimisation of the transmission and motor selection. Paper E presents an approach for re-using CAD geometry for multi body modelling of a rock drilling rig boom. Paper F presents synthesis methods for mechanical systems. Joint and part number synthesis is performed using the Grübler and Euler equations. The synthesis is continued by applying the theory of generative grammar, from which the grammatical rules of planar mechanisms have been formulated. An example of topological synthesis of mechanisms utilising this grammar is presented. Finally, dimensional synthesis of the mechanism is carried out by utilising non-linear programming with addition of a penalty function to avoid singularities.
keywords Simulation; Optimisation; Control Systems; Computer Aided Engineering; Multi Body Systems; Finite Element Method; Backslash; Clearance; Industrial Robots; Parallel Robots
series thesis:PhD
last changed 2003/02/12 22:37

_id 9dfa
authors Ries, R. and Mahdavi, A.
year 1999
title Environmental Life Cycle Assessment in an Integrated CAD Environment: The Ecologue Approach
source Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 351-363
summary Construction and operation of buildings is a major cause of resource depletion and environmental pollution. Computational performance evaluation tools could support the decision making process in environmentally responsive building design and play an important role in environmental impact assessment, especially when a life cycle assessment (LCA) approach is used. The building domain, however, presents notable challenges to the application of LCA methods. For comprehensive environmental impact analysis to be realized in a computational support tool for the building design domain, such tools must a) have an analysis method that considers the life cycle of building construction, operation, and decommissioning, b) have a representation that is able to accommodate the data and computability requirements of the analysis method and the analysis tool, and c) be seamlessly integrated within a multi-aspect design analysis environment that can provide data on environmentally relevant building operation criteria. This paper reviews the current state of assessment methods and computational support tools for LCA, and their application to building design. Then, the implementation of an application (ECOLOGUE) for comprehensive computational assessment of environmental impact indicators over the building life cycle is presented. The application is a component in a multi-aspect space-based CAD and evaluation environment (SEMPER). The paper describes the use and typical results of ECOLOGUE system via illustrative examples.
keywords Life Cycle Assessment, Integrated Computational Environmental Analysis
series CAAD Futures
email
last changed 2006/11/07 07:22

_id 0647
authors Rosenberg, D.
year 1999
title Use Case Driven Object Modeling with UML
source A Practical Approach. Reading, MA: Addison-Wesley
summary Combining some of today's best ideas about customer-driven object-oriented design, Use Case Driven Object Modeling with UML: A Practical Approach shows you how to use Unified Modeling Language (UML) in the real world, keeping with the author's proprietary software design process. The book begins with the genesis of the author's ICONIX Unified Object Modeling Approach, borrowing ideas and strategies from the "three amigos" who invented UML: Grady Booch, James Rumbaugh, and Ivar Jacobson. Throughout this text, the ICONIX method is used to model a stock trading system, with all the relevant UML diagrams, beginning with class definition and use cases. The author's approach to software relies heavily on customer requirements and use case scenarios for which he has a good deal of practical advice. He provides numerous hints for avoiding bogged-down diagrams. After preliminary design, he advocates drilling down into specifics with robustness diagrams, which trace how classes interact with one another. The most detailed design work comes next with sequence diagrams. Subsequent chapters offer tips on project management, implementation, and testing. Throughout this lively and intelligently organized book, the author presents numerous real-world tips (and Top 10 lists) that supply wisdom to his perspective on effective software design.
series other
last changed 2003/04/23 15:14

_id 3d23
authors Sellgren, Ulf
year 1999
title Simulation-driven Design
source KTH Stockholm
summary Efficiency and innovative problem solving are contradictory requirements for product development (PD), and both requirements must be satisfied in companies that strive to remain or to become competitive. Efficiency is strongly related to ”doing things right”, whereas innovative problem solving and creativity is focused on ”doing the right things”. Engineering design, which is a sub-process within PD, can be viewed as problem solving or a decision-making process. New technologies in computer science and new software tools open the way to new approaches for the solution of mechanical problems. Product data management (PDM) technology and tools can enable concurrent engineering (CE) by managing the formal product data, the relations between the individual data objects, and their relation to the PD process. Many engineering activities deal with the relation between behavior and shape. Modern CAD systems are highly productive tools for concept embodiment and detailing. The finite element (FE) method is a general tool used to study the physical behavior of objects with arbitrary shapes. Since a modern CAD technology enables design modification and change, it can support the innovative dimension of engineering as well as the verification of physical properties and behavior. Concepts and detailed solutions have traditionally been evaluated and verified with physical testing. Numerical modeling and simulation is in many cases a far more time efficient method than testing to verify the properties of an artifact. Numerical modeling can also support the innovative dimension of problem solving by enabling parameter studies and observations of real and synthetic behavior. Simulation-driven design is defined as a design process where decisions related to the behavior and performance of the artifact are significantly supported by computer-based product modeling and simulation. A framework for product modeling, that is based on a modern CAD system with fully integrated FE modeling and simulation functionality provides the engineer with tools capable of supporting a number of engineering steps in all life-cycle phases of a product. Such a conceptual framework, that is based on a moderately coupled approach to integrate commercial PDM, CAD, and FE software, is presented. An object model and a supporting modular modeling methodology are also presented. Two industrial cases are used to illustrate the possibilities and some of the opportunities given by simulation-driven design with the presented methodology and framework.
keywords CAE; FE Method; Metamodel; Object Model; PDM; Physical Behavior, System
series thesis:PhD
email
last changed 2003/02/12 22:37

_id 3e4c
authors Xiao, Litian and Hao, Xueying
year 1999
title A Knowledge Base System in the Residential Intelligent CAD System
doi https://doi.org/10.52842/conf.caadria.1999.161
source CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 161-170
summary The paper discusses the construction of knowledge-base system in a residential intelligent CAD system (RICAD). It introduces the main parts of residential architecture knowledge-base, the division and management of residential architecture knowledge, the classification of rules, the inference engine and the control strategy, and the fuzzy processing method. RICAD can produce the residential construction drawings under the bounded conditions given by the user. The paper also discusses some reality models and algorithm. These are effective in the practice.
keywords Knowledge Base, Intelligent CAD, Residential Design, Architectural Construction Drawings
series CAADRIA
last changed 2022/06/07 07:57

_id 20ab
authors Yakeley, Megan
year 2000
title Digitally Mediated Design: Using Computer Programming to Develop a Personal Design Process
source Massachusetts Institute of Technology, Department of Architecture
summary This thesis is based on the proposal that the current system of architectural design education confuses product and process. Students are assessed through, and therefore concentrate on, the former whilst the latter is left in many cases to chance. This thesis describes a new course taught by the author at MIT for the last three years whose aim is to teach the design process away from the complexities inherent in the studio system. This course draws a parallel between the design process and the Constructionist view of learning, and asserts that the design process is a constant learning activity. Therefore, learning about the design process necessarily involves learning the cognitive skills of this theoretical approach to education. These include concrete thinking and the creation of external artifacts to develop of ideas through iterative, experimental, incremental exploration. The course mimics the Constructionist model of using the computer programming environment LOGO to teach mathematics. It uses computer programming in a CAD environment, and specifically the development of a generative system, to teach the design process. The efficacy of such an approach to architectural design education has been studied using methodologies from educational research. The research design used an emergent qualitative model, employing Maykut and Morehouses interpretive descriptive approach (Maykut & Morehouse, 1994) and Glaser and Strausss Constant Comparative Method of data analysis (Glaser & Strauss, 1967). Six students joined the course in the Spring 1999 semester. The experience of these students, what and how they learned, and whether this understanding was transferred to other areas of their educational process, were studied. The findings demonstrated that computer programming in a particular pedagogical framework, can help transform the way in which students understand the process of designing. The following changes were observed in the students during the course of the year: Development of understanding of a personalized design process; move from using computer programming to solve quantifiable problems to using it to support qualitative design decisions; change in understanding of the paradigm for computers in the design process; awareness of the importance of intrapersonal and interpersonal communication skills; change in expectations of, their sense of control over, and appropriation of, the computer in the design process; evidence of transference of cognitive skills; change from a Behaviourist to a Constructionist model of learning Thesis Supervisor: William J. Mitchell Title: Professor of Architecture and Media Arts and Sciences, School of Architecture and Planning
series thesis:PhD
last changed 2003/02/12 22:37

_id 7082
authors Dawood, N.
year 1999
title A proposed system for integrating design and production in the precast building industry
source The Int. Journal of Construction IT 7(1), pp. 72-83
summary The UK construction industry is going through a major re-appraisal, with the objective of reducing construction costs by at least 30% by the end of the millennium. Precast and off-site construction are set to play a major role in improving construction productivity, reducing costs and improving working conditions. In a survey of current practices in the prefabrication industry, it was concluded that the industry is far behind other manufacturing-based industries in terms of the utilisation of IT in production planning and scheduling and other technical and managerial operations. It is suggested that a systematic, integrated, computer-aided, approach to presenting and processing information is needed. The objective of this paper is to introduce and discuss the specifications of an integrated intelligent computer-based information system for the precast concrete industry. The system should facilitate: the integration of design and manufacturing operations; automatic generation of production schedules directly from design data and factory attributes; and generation of erection schedules from site information, factory attributes and design data. It is hypothesised that the introduction of such a system would reduce the total cost of precasting by 10% and encourage clients to choose precast components more often.
series journal paper
last changed 2003/05/15 21:45

_id 125a
authors Dikbas, Attila
year 1999
title An Evaluating Model for the Usage of Web-based Information Technology in Computer Aided Architectural Design and Engineering Education
doi https://doi.org/10.52842/conf.ecaade.1999.349
source Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 349-352
summary New technologies often reshape expectations, needs and Opportunities so as to develop strategic Plans for the implementation of Information Techniques in education and research. The widespread acceptance of the internet and more specifically the World Wide Web (WWW) has raised the awareness of educators to the potential for online education, virtual classrooms and even virtual universities. With the advent of computer mediated communication, especially the widespread adoption of the web as a publishing medium, educators see the advantages and potential of delivering educational material over the Internet. The Web offers an excellent medium for content delivery with full text, colour graphics support and hyperlinks. The Purpose of this paper is to present a model for the usage of web-based information technology in computer aided architectural design and engineering education. It involves the key features of a full educational system that is capable of offering the teacher and the student flexibility with which to approach their teaching and learning tasks in ways most appropriate to the architectural design and engineering education. Web-based educational system aims at creating quality in on-line educational materials taking collaboration, support, new skills, and, most of all, time. The paper concludes with a discussion of the benefits of such an education system suggesting directions for further work needed to improve the quality of architectural design and engineering education.
keywords Web-based Information Technology, Online Education, Virtual Campus, Computer Aided Architectural Design, Engineering Education
series eCAADe
last changed 2022/06/07 07:55

_id ab77
authors Iki, K., Shimoda, S., Kumadaki, N. and Homma, R.
year 1999
title Development and Use of Intranet-Based CAFM System
doi https://doi.org/10.52842/conf.caadria.1999.383
source CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 383-392
summary In the past CAFM system study, we proposed a system for supporting data-processing and plan-drafting, on the assumption that it is to be used in different stages of Building Construction, Interior Spatial Planning and Maintenance. By the above system, we have developed a CAFM system using the DBMS (Data Base Management System), CAD (Computer Aided Design) and Spread Sheet as the analysis tools. Management system with FM-related data editing functions such as 'Input', 'Modification', 'Deleting', etc, are proposed. To promote the FM business smoothly, information should be shared among departments concerned, and informative administrative framework should be organized. This time, we propose a prototype of CAFM system on INTRANET which is developed for general users that permits browsing and downloading of system database.
series CAADRIA
last changed 2022/06/07 07:50

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 31HOMELOGIN (you are user _anon_140846 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002