Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 252

Reformat results as: short short into frame detailed detailed into frame

_id	a872
authors	Frassia, Mercedes
year	1999
title	Código Digital de la Ciudad de Buenos Aires (Digital Code of the City of Buenos Aires)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 209-212
summary	As a result of an agreement signed between the urban planning secretary depending on the Buenos Aires government and the Buenos Aires University, a software was developed. It has enough capacity to store, update and transmit the regulations that guide the development of Buenos Aires City. This application was materialized using graphic interfaces, what encourage the construction of a highly friendly program. It was constructed having the WWW in mind, to admit the consults and bring up to date in a distance environment.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	0beb
authors	Koch, Volker and Russell, Peter
year	2000
title	VuuA.Org: The Virtual Upperrhine University of Architecture
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 23-25
doi	https://doi.org/10.52842/conf.ecaade.2000.023
summary	In 1998, architecture schools in the three nation region of the upper Rhine came together to undertake a joint design studio. With the support of the Center for Entrepeneurship in Colmar, France, the schools worked on the reuse of the Kuenzer Mill situated near Herbolzheim, Germany. The students met jointly three times during the semester and then worked on the project at their home universities usng conventional methods. This project was essential to generating closer ties between the participating students, tutors and institutions and as such, the results were quite positive. So much so, that the organisers decided to repeat the exercise one year later. However, it became clear that although the students had met three times in large groups, the real success of a co-operative design studio would require mechanisms which allow far more intimate interaction among the participants, be they students, teachers or outside experts. The experiences from the Netzentwurf at the Institut für Industrielle Bauproduktion (ifib) showed the potential in a web based studio and the addition of ifib to the three nation group led to the development of the VuuA platform. The first project served to illuminate the the differences in teaching concepts among the partner institutions and their teaching staff as well as problems related to the integration of students from three countries with two languages and four different faculties: landscape architecture, interior design, architecture and urban planning. The project for the Fall of 1999 was the reuse of Fort Kléber in Wolfisheim by Strasbourg, France. The students again met on site to kick off the Semester but were also instructed to continue their cooperation and criticism using the VuuA platform.
keywords	Virtual Design Studio, CSCW, International Cooperation, Planning Platform
series	eCAADe
email
more	http://www.vuua.org
last changed	2022/06/07 07:51

_id	fa7a
authors	Kokosalakis, Jen
year	1999
title	Learning to Learn Through Computing: Sensitising Surveys and Empowering Urban Stakeholder's Input to Policy
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 714-721
doi	https://doi.org/10.52842/conf.ecaade.1999.714
summary	Reflection on three decades using computing at JMU, to teach survey techniques to planners, with application to community research projects, reveals that each computing "learning" threshold/milestone enabled each protagonist (research lecturer, planning student, professional and community-stakeholder),"to learn" more broadly. This facilitated more sensitive data-gathering-so empowering respondent/residents with more control to define data to influence urban policy. The seventies' mechanical processing and limited computing experience restricted data quality/depth. Hand-processing 'edge punch cards' recorded enriched variety and depth. Learning computing from Maths lecturers enabled students to learn to control SPSS program and data files. Maths lecturers' withdrawal necessitated the authors' learning, which brought control of the whole process, so facilitating informal inductive interviews-more open to respondents' control over topics to be discussed. Planners learning 3DCAAD-modelling, learned to conceptualise spatially. Community members used CAAD with greater ease, possibly through greater Internet and games experience. Free, EU-funded, private, government, and so on training schemes for Merseysiders, may enfranchise them to define and submit their own demands regarding urban regeneration, directly, through new technological channels (opened by Local Authorities). And new partnering, with private, public and developer agencies may drive these initiatives home.
keywords	Research Methods, Community Empowerment, Learning Computing, Urban Planning, Sensitivity
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ddssup0211
id	ddssup0211
authors	Lolonis, P., Rokos, D. and Maragou, M.
year	2002
title	Use of Cadastral Data for the Development of Spatial Decision Support Systemsfor Coping with the Consequences of Natural Disasters
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	This paper investigates the potential usefulness of cadastral data to form the core part of databases of Spatial Decision Support Systems [SDSS] that are capable to support decision-makers in dealing with emergency situations, such as earthquakes, floods and fires. Particular emphasis is given on how those data can be used to generate information that is necessary to planners and decision-makers when they cope with natural disasters at every stage of the development of the disaster: before the occurrence (planning and preventive measures), immediately after occurrence (short term measures), and well-after occurrence (medium and long term measures). This investigation is conducted using the Municipality of Magoula, Attica, Greece, as a case study area. This municipality is situated in the greater Athens area and was struck by the earthquake that occurred there in September 1999. Within the scope of the project, wehave used cadastral data about the study area and data recorded by the inspection teams in order to set-up a prototype SDSS database that could facilitate planning and decision-making in such a situation. Then, we have used that prototype to generate scenarios and information about typical tasks that are performed during emergency situations. The advantages that are realized from the integration of such data and information technologies are described and assessed, particularly, in comparison with the traditional approaches that are used in such situations.
series	DDSS
last changed	2003/08/07 16:36

_id	b2ff
authors	Orev, Ruthie
year	1999
title	Computerized Simulation of Urbanism Phenomena
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 143-155
summary	Despite the complex forces that operate in urban development, a relatively small number of geometries and morphologies may be identified in urban maps. Do covert universal laws exist which are integral to the concept of the city and responsible for the geometry? May one formulate such laws and program a computer to produce maps on the basis thereof, thus exposing architectural reality to a scientific process of objective experimentation? In an effort to answer these questions, I wrote programs based on definitions, parameters and rules reflecting architectural phenomena. The creation process using the programs is based on a formalistic approach, drawing on a random mechanism, considerations of probability and numerous calculations. This "computerized planning" does not mimic or simulate human work processes. The programs enable a considerable measure of visual variety to be achieved, replicating familiar urban morphologies. One may isolate variables, starting conditions and growth processes, and examine the influence thereof on fabric, organization and order. The existence of a program such as this raises questions of principle concerning randommes and creation, the future role of architects, the creative capacities of computers, the connection between science and architecture, truth in virtual situations, etc.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	4511
authors	Ratti, Carlo and Richens, Paul
year	1999
title	Urban Texture Analysis with Image Processing Techniques
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 49-64
summary	A new paradigm for investigating the environmental consequences of urban texture is proposed. Using raster-based models and software algorithms derived from image processing, efficient methods of measuring geometric parameters and predicting radiation exchange are developed. The possibilities of generating synthetic urban textures, and integrating cellular automata, are explored. Results suggest the possibility of a raster-based urban model to inform planning and design.
keywords	Urban Texture, Image Processing, Urban Environmental Analysis, Urban Morphology, Cellular Automata
series	CAAD Futures
email
more	http://www.arct.cam.ac.uk/research/pubs/
last changed	2006/11/07 07:22

_id	4aa9
authors	Roberts, Andrew
year	1999
title	Virtual Site Planning
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 442-447
doi	https://doi.org/10.52842/conf.ecaade.1999.442
summary	This paper looks at the potential for the Virtual Reality to be used as a medium for the development of teaching tools in Architectural and Urban Design Education. It identifies examples and lessons learned from the development of teaching tools in other disciplines. The paper outlines a prototype system developed at Cardiff University to help Town Planning students understand the three dimensional nature of site planning and design. This was developed following difficulties encountered by students in using CAD which was seen as insufficiently intuitive to allow effective use within the short timespan available. The prototype system allows students to access their site through the familiar environment of a Web Browser. A number of 'Standard' house types are available which can be selected and inserted into the design space. Once in the space the houses can be viewed in three dimensions, moved and rotated in order to form any configuration that the students may wish. The system is easily customisable; it need not be limited to uses in urban design, but could be used in many situations where component parts are arranged in space.
keywords	Virtual Reality, Teaching, Learning, Site Planning
series	eCAADe
email
more	http://ctiweb.cf.ac.uk/Housing/
last changed	2022/06/07 07:56

_id	5c4a
authors	Smith, A.
year	1999
title	CVDS - Towards A Collaborative Virtual Design Studio
source	Habitat 7, Spring
summary	A Collaborative Virtual Design Studio (CVDS), accessible via the World Wide Web, is being developed by Online Planning at the Centre for Advanced Spatial Analysis, University College London. The CVDS is a result of research into the visualisation of urban form using Internet based communications. The visualisation of urban form is central to the design process, involving parties as wide ranging as Architects, Town Planners and Urban Designers to special interest groups and the general public.
series	other
last changed	2003/04/23 15:50

_id	ga0010
id	ga0010
authors	Moroni, A., Zuben, F. Von and Manzolli, J.
year	2000
title	ArTbitrariness in Music
source	International Conference on Generative Art
summary	Evolution is now considered not only powerful enough to bring about the biological entities as complex as humans and conciousness, but also useful in simulation to create algorithms and structures of higher levels of complexity than could easily be built by design. In the context of artistic domains, the process of human-machine interaction is analyzed as a good framework to explore creativity and to produce results that could not be obtained without this interaction. When evolutionary computation and other computational intelligence methodologies are involved, every attempt to improve aesthetic judgement we denote as ArTbitrariness, and is interpreted as an interactive iterative optimization process. ArTbitrariness is also suggested as an effective way to produce art through an efficient manipulation of information and a proper use of computational creativity to increase the complexity of the results without neglecting the aesthetic aspects [Moroni et al., 2000]. Our emphasis will be in an approach to interactive music composition. The problem of computer generation of musical material has received extensive attention and a subclass of the field of algorithmic composition includes those applications which use the computer as something in between an instrument, in which a user "plays" through the application's interface, and a compositional aid, which a user experiments with in order to generate stimulating and varying musical material. This approach was adopted in Vox Populi, a hybrid made up of an instrument and a compositional environment. Differently from other systems found in genetic algorithms or evolutionary computation, in which people have to listen to and judge the musical items, Vox Populi uses the computer and the mouse as real-time music controllers, acting as a new interactive computer-based musical instrument. The interface is designed to be flexible for the user to modify the music being generated. It explores evolutionary computation in the context of algorithmic composition and provides a graphical interface that allows to modify the tonal center and the voice range, changing the evolution of the music by using the mouse[Moroni et al., 1999]. A piece of music consists of several sets of musical material manipulated and exposed to the listener, for example pitches, harmonies, rhythms, timbres, etc. They are composed of a finite number of elements and basically, the aim of a composer is to organize those elements in an esthetic way. Modeling a piece as a dynamic system implies a view in which the composer draws trajectories or orbits using the elements of each set [Manzolli, 1991]. Nonlinear iterative mappings are associated with interface controls. In the next page two examples of nonlinear iterative mappings with their resulting musical pieces are shown.The mappings may give rise to attractors, defined as geometric figures that represent the set of stationary states of a non-linear dynamic system, or simply trajectories to which the system is attracted. The relevance of this approach goes beyond music applications per se. Computer music systems that are built on the basis of a solid theory can be coherently embedded into multimedia environments. The richness and specialty of the music domain are likely to initiate new thinking and ideas, which will have an impact on areas such as knowledge representation and planning, and on the design of visual formalisms and human-computer interfaces in general. Above and bellow, Vox Populi interface is depicted, showing two nonlinear iterative mappings with their resulting musical pieces. References [Manzolli, 1991] J. Manzolli. Harmonic Strange Attractors, CEM BULLETIN, Vol. 2, No. 2, 4 -- 7, 1991. [Moroni et al., 1999] Moroni, J. Manzolli, F. Von Zuben, R. Gudwin. Evolutionary Computation applied to Algorithmic Composition, Proceedings of CEC99 - IEEE International Conference on Evolutionary Computation, Washington D. C., p. 807 -- 811,1999. [Moroni et al., 2000] Moroni, A., Von Zuben, F. and Manzolli, J. ArTbitration, Las Vegas, USA: Proceedings of the 2000 Genetic and Evolutionary Computation Conference Workshop Program – GECCO, 143 -- 145, 2000.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	b4d2
authors	Caldas, Luisa G. and Norford, Leslie K.
year	1999
title	A Genetic Algorithm Tool for Design Optimization
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 260-271
doi	https://doi.org/10.52842/conf.acadia.1999.260
summary	Much interest has been recently devoted to generative processes in design. Advances in computational tools for design applications, coupled with techniques from the field of artificial intelligence, have lead to new possibilities in the way computers can inform and actively interact with the design process. In this paper we use the concepts of generative and goal-oriented design to propose a computer tool that can help the designer to generate and evaluate certain aspects of a solution towards an optimized behavior of the final configuration. This work focuses mostly on those aspects related to the environmental performance of the building. Genetic Algorithms are applied as a generative and search procedure to look for optimized design solutions in terms of thermal and lighting performance in a building. The Genetic Algorithm (GA) is first used to generate possible design solutions, which are then evaluated in terms of lighting and thermal behavior using a detailed thermal analysis program (DOE2.1E). The results from the simulations are subsequently used to further guide the GA search towards finding low-energy solutions to the problem under study. Solutions can be visualized using an AutoLisp routine. The specific problem addressed in this study is the placing and sizing of windows in an office building. The same method is applicable to a wide range of design problems like the choice of construction materials, design of shading elements, or sizing of lighting and mechanical systems for buildings.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ga9916
id	ga9916
authors	Elzenga, R. Neal and Pontecorvo, Michael S.
year	1999
title	Arties: Meta-Design as Evolving Colonies of Artistic Agents
source	International Conference on Generative Art
summary	Meta-design, the act of designing a system or species of design instead of a design instance, is an important concept in modern design practice and in the generative design paradigm. For meta-design to be a useful tool, the designer must have more formal support for both design species definition/expression and the abstract attributes which the designer is attempting to embody within a design. Arties is an exploration of one possible avenue for supporting meta-design. Arties is an artistic system emphasizing the co-evolution of colonies of Artificial Life design or artistic agents (called arties) and the environment they inhabit. Generative design systems have concentrated on biological genetics metaphors where a population of design instances are evolved directly from a set of ‘parent’ designs in a succession of generations. In Arties, the a-life agent which is evolved, produces the design instance as a byproduct of interacting with its environment. Arties utilize an attraction potential curve as their primary dynamic. They sense the relative attraction of entities in their environment, using multiple sensory channels. Arties then associate an attractiveness score to each entity. This attractiveness score is combined with a 'taste' function built into the artie that is sensitized to that observation channel, entity, and distance by a transfer function. Arties use this attraction to guide decisions and behaviors. A community of arties, with independent evolving attraction criteria can pass collective judgement on each point in an art space. As the Artie moves within this space it modifies the environment in reaction to what it senses. Arties support for Meta-design is in (A) the process of evolving arties, breeding their attraction potential curve parameters using a genetic algorithm and (B) their use of sensory channels to support abstract attributes geometries. Adjustment of these parameters tunes the attraction of the artie along various sensing channels. The multi-agent co-evolution of Arties is one approach to creating a system for supporting meta-design. Arties is part of an on-going exploration of how to support meta-design in computer augmented design systems. Our future work with Arties-like systems will be concerned with applications in areas such as modeling adaptive directives in Architecture, Object Structure Design, spatio-temporal behaviors design (for games and simulations), virtual ambient spaces, and representation and computation of abstract design attributes.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	e978
authors	[Zupancic] Strojan, Tadeja Z.
year	1999
title	CyberUniversity
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 196-200
doi	https://doi.org/10.52842/conf.ecaade.1999.196
summary	The study of a cyberuniversity derives from an analogy between real urban space and its virtual "substitution". It represents an attempt to balance some views, which seems to be contrary, exclusive, but they are just parts of the same wholeness. Especially the notion of a cyber society is lately considered such an exaggeration, that it is possible to forget the meaning of a real life experience and interactions, which are already threatened. One should contribute to the awarness that is used in such a comparison, it is "just" an analogy, not a real similarity. At the same time it is possible to point out some limitations of a cyberspace and indicate a more realistic view of the meaning of cyber communities. Awarness of the development processes could help to find a balance between reality and virtuality, using cyberfacilities not to destroy us (our identity) but to improve the quality of our (real) life.
keywords	University, Cyberuniversity, Space, Cyberspace
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	7436
authors	Barría Chateau, H., Muñoz Viveros, C. and Cerda Brintrup, G.
year	1999
title	Virtual Tour Through Modern Architecture in Conception
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 475-477
summary	This paper describes the development of a project that was selected and sponsoured by the Regional Competition FONDART 1998 (Funds for the Development of Arts of the Regional Secretary of Education) that follows the aim of cultural diffusion. Towards the middle of the 30s, the city of Concepción developed an architecture distinctly colonial, neoclassical and eclectic. An earthquake in 1939 abruptly interrupted this scene, destroying the enterity of its most important buildings. The reconstruction of the city followed the manifestoes of Modern Architecture, consolidating the urban importance of buildings such us the Law Courts, the Railway Station and the Regional Government, that emerged as the new architectural and cultural heritage of the city. The project consisted on the modeling of eleven buildings of the modern architectural heritage, and on the generation of 42 virtual tours through the buildings that were finally edited on a 16' video. This video allows the spectator to make a virtual tour through the original modern heritage of the city, nowadays demolished, altered, and sometimes, even forgotten. This project pretends to widen the ways of comprehension of our cultural identity by using computer modelling and animation as a tool for the conservation of the architectural heritage; and creating a record that can be used as a reference and as an instrument of cultural difussion.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	f288
authors	Bille, Pia
year	1999
title	Integrating GIS and Electronic Networks In Urban Design and Planning
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
doi	https://doi.org/10.52842/conf.ecaade.1999.722
summary	In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords	Urban Planning, Electronic Collaboration, GIS, Data Bases
series	eCAADe
email
last changed	2022/06/07 07:54

_id	7229
authors	Brenner, C. and Haala, N.
year	1999
title	Towards Virtual Maps: On the Production of 3D City Models
source	GeoInformatics 2(5), pp. 10–13
summary	The growing demand for detailed city models has stimulated research on efficient 3D data acquisition. Over the past years, it has become evident that the automatic reconstruction of urban scenes is most promising if different types of data, possibly originating from different data sources are combined. In the approach presented in this paper the geometric reconstruction of urban areas is based on height data from airborne laser scanning and 2D GIS, which provides the ground plan geometry of buildings. Both data sources are used to estimate the type and parameter of basic primitives which in turn are combined to obtain complex building structures. The final output consists of 3D CAD models for the buildings. Using the reconstructed geometry, terrestrial images are mapped onto building facades to generate virtual city models.
keywords	3D City modeling
series	journal paper
last changed	2003/11/21 15:16

_id	165b
authors	Brenner, C. and Haala, N.
year	1999
title	Rapid Production of Virtual Reality City Models
source	GIS - Geo-Informationssysteme 12(3), pp. 22–28
summary	The growing demand for detailed city models has stimulated research on efficient 3D data acquisition. Over the past years, it has become evident that the automatic reconstruction of urban scenes is most promising if different types of data, possibly originating from different data sources are combined. In the approach presented in this paper the geometric reconstruction of urban areas is based on height data from airborne laser scanning and 2D GIS, which provides the ground plan geometry of buildings. Both data sources are used to estimate the type and parameter of basic primitives which in turn are combined to obtain complex building structures. The final output consists of 3D CAD models for the buildings. Using the reconstructed geometry, terrestrial images are mapped onto building facades to generate virtual city models.
keywords	3D City modeling
series	other
last changed	2003/11/21 15:16

_id	5f9c
authors	Castello, Regina
year	1999
title	GIS and the Investigation of the Environmental Heritage
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 219-224
summary	This paper presents an investigation on the architectural, natural, and cultural resources in the southern part of the state of Rio Grande do Sul, according to their historical or environmental value, identifying natural and cultural elements known and valued by local communities, regardless their experts’ classification. Resources are identified by means of geographical information systems, combined with field information. The area comprises the coastal strip and the plains located in the last frontier of the Brazilian territory and the water system dominated by the lakes Patos, Mangueira and Mirim. The inventory of the environmental, sociocultural and economic heritage provides the necessary insight for issuing new development alternatives based on local resources. Research activities will include: the ellaboration of general and thematic maps, based on LANDSAT 5 [bands 3, 4 and 5] images; aerial photographs; DSG/SGE and municipal maps [scales 1:250.000, 1:50.000 and 1:25.000]; field work for the recognition of remarkable elements; interviews with residents for assessing their perception of local values; and community and institutional statements. These informations, comprising the elements valued by their architectural and urban quality, historical relevance and environmental significance, organised in a database, will provide contextual guidelines for the planning of a tourist route. This route, delineated by the preservation, recovery and use of representative local resources, valued as expressions of a native culture, evocates the initial occupation of the gaúcho territory, and may be touristically promoted as "The Gaúcho’s Way". The project also aims at showing the potential offered by GIS for identifying and evaluating specific spatial characteristics.
keywords	Environmental Planning, Historical Preservation
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ga9913
id	ga9913
authors	Ceccato, Cristiano and Liauw, Laurence
year	1999
title	Parametric Urbanism: Explorations in Generative Urban Design
source	International Conference on Generative Art
summary	This paper is the result of several years of research by the Authors into the new field of generative design, as applied to urbanism. Its purpose is to formulate a concept of parametric urbanism and data-driven urban design, and how it departs from existing concepts of urban analysis and resulting design methods. This paper first gives a definition and description of the notion of generative urban design, and its relevance to current the practice of architecture and global political, sociological and economic developments. The difference between dogmatic forms of urban design and new parametric research methods is explained, and the Authors argue the fundamental relevance of using examples of post-colonial large-scale projects. In support of this, the Authors explore the widening field of research into parametric and data-driven architecture and urban design and the history of rule-based and evolutionary design methodologies. The paper illustrates examples of successful research in the field of parametric and rule-based urban design, by the Authors as well as colleagues within the field. It surveys the Authors’ work done at the Architectural Association School of Architecture, at the Hong Kong Polytechnic University School of Design, as well as in practice and research-oriented consultancy. The projects illustrated support the thesis of parametric urbanism by showing its power and versatility when applied to very large-scale projects, in particular within the People’s Republic of China.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	d9d0
authors	Cohen Egler, Tamara Tania
year	1999
title	Río Digital (Digital Rio)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 478-481
summary	RioDigital is a text situated on new forms of expression of knowledge over the city. It is a written multimedia whose objective is to place in disposability for the society the complexity of urban space on its multiple historical determinations, of its space, social and cultural forms. It is a research over the potentials of digital art to express the processes of constitution of social forms and constructions of urban space. The motion of works was in the sense of using this language to reconstitute and vivify the history of Rio de Janeiro city in the XX century. The city is an ensemble of symbols that encounters the language in its best form of presentation. The research identified visual documents as films, photos and maps that made possible to reconstruct processes of transformation, worked through the use of digital images technology that allows expression and turns move perceptible the transmission of this history. The digital image is certainly a possibility to represent urban reality. Through movement, illumination of image and of writing it was possible to express to process of construction and reconstruction of space building and social changes. We understand that the condition of citizen is associated with the feeling of belonging, which urban process every time move complex and difficult to understand, that new technologies can through synthesis, connectivity and interactivity expand the capacity of indivils to know the city and act positively with it. It is an intention to amplify the sense of belonging and encourage the action of transform.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	85ab
authors	Corrao, Rossella and Fulantelli, Giovanni
year	1999
title	Architects in the Information Society: The Role of New Technologies
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 665-671
doi	https://doi.org/10.52842/conf.ecaade.1999.665
summary	New Technologies (NTs) offer us tools with which to deal with the new challenges that a changing society or workplace presents. In particular, new design strategies and approaches are required by the emerging Information Society, and NTs offer effective solutions to the designers in the different stages of their professional life, and in different working situations. In this paper some meaningful scenarios of the use of the NTs in Architecture and Urban Design are introduced; the scenarios have been selected in order to understand how the role of architects in the Information Society is changing, and what new opportunities NTs offer them. It will be underlined how the telematic networks play an essential role in the activation of virtual studios that are able to compete in an increasingly global market; examples will be given of the use of the Web to support activities related to Urban Planning and Management; it will be shown how the Internet may be used to access strategic resources for education and training, and sustain lifelong learning. The aforesaid considerations derive from a Web-Based Instruction system we have developed to support University students in the definition of projects that can concern either single buildings or whole parts of a city. The system can easily be adopted in the other scenarios introduced.
keywords	Architecture, Urban Planning , New Technologies, World Wide Web, Education
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: