Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 565

Reformat results as: short short into frame detailed detailed into frame

_id	ga9922
id	ga9922
authors	Annunziato, M. and Pierucci, P.
year	1999
title	The Art of Emergence
source	International Conference on Generative Art
summary	Since several years, the term emergence is mentioned in the paradigm of chaos and complexity. Following this approach, complex system constituted by multitude of individual develop global behavioral properties on the base of local chaotic interactions (self-organization). These theories, developed in scientific and philosophical milieus are rapidly spreading as a "way of thinking" in the several fields of cognitive activities. According to this "way of thinking" it is possible revise some fundamental themes as the economic systems, the cultural systems, the scientific paths, the communication nets under a new approach where nothing is pre-determined, but the global evolution is determined by specific mechanisms of interaction and fundamental events (bifurcation). With a jump in scale of the life, also other basic concepts related to the individuals as intelligence, consciousness, psyche can be revised as self-organizing phenomena. Such a conceptual fertility has been the base for the revision of the artistic activities as flexible instruments for the investigation of imaginary worlds, metaphor of related real worlds. In this sense we claim to the artist a role of "researcher". Through the free exploration of new concepts, he can evoke qualities, configurations and hypothesis which have an esthetical and expressive value and in the most significant cases, they can induce nucleation of cultural and scientific bifurcation. Our vision of the art-science relation is of cooperative type instead of the conflict of the past decades. In this paper we describe some of the most significant realized artworks in order to make explicit the concepts and basic themes. One of the fundamental topics is the way to generate and think to the artwork. Our characterization is to see the artwork not as a static finished product, but as an instance or a dynamic sequence of instances of a creative process which continuously evolves. In this sense, the attention is focused on the "generative idea" which constitutes the envelop of the artworks generable by the process. In this approach the role of technology (computers, synthesizers) is fundamental to create the dimension of the generative environment. Another characterizing aspect of our artworks is derived by the previous approach and specifically related to the interactive installations. The classical relation between artist, artwork and observers is viewed as an unidirectional flux of messages from the artist to the observer through the artwork. In our approach artist, artwork and observer are autonomous entities provided with own personality which jointly intervene to determine the creative paths. The artist which generate the environment in not longer the "owner" of the artwork; simply he dialectically bring the generative environment (provided by a certain degree of autonomy) towards cultural and creative "void" spaces (not still discovered). The observers start from these platforms to generate other creative paths, sometimes absolutely unexpected , developing their new dialectical relations with the artwork itself. The results derived by these positions characterize the expressive elements of the artworks (images, sequences and sounds) as the outcomes of emergent behavior or dynamics both in the sense of esthetical shapes emergent from fertile generative environments, either in terms of emergent relations between artist, artwork and observer, either in terms of concepts which emerge by the metaphor of artificial worlds to produce imaginary hypothesis for the real worlds.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	4b48
authors	Dourish, P.
year	1999
title	Where the Footprints Lead: Tracking down other roles for social navigation
source	Social Navigation of Information Space, eds. A. Munro, K. H. and D Benyon. London: Springer-Verlag, pp 15-34
summary	Collaborative Filtering was proposed in the early 1990's as a means of managing access to large information spaces by capturing and exploiting aspects of the experiences of previous users of the same information. Social navigation is a more general form of this style of interaction, and with the widening scope of the Internet as an information provider, systems of this sort have rapidly moved from early research prototypes to deployed services in everyday use. On the other hand, to most of the HCI community, the term social navigation" is largely synonymous with "recommendation systems": systems that match your interests to those of others and, on that basis, provide recommendations about such things as music, books, articles and films that you might enjoy. The challenge for social navigation, as an area of research and development endeavour, is to move beyond this rather limited view of the role of social navigation; and to do this, we must try to take a broader view of both our remit and our opportunities. This chapter will revisit the original motivations, and chart something of the path that recent developments have taken. Based on reflections on the original concerns that motivated research into social navigation, it will explore some new avenues of research. In particular, it will focus on two. The first is social navigation within the framework of "awareness" provisions in collaborative systems generally; and the second is the relationship of social navigation systems to spatial models and the ideas of "space" and "place" in collaborative settings. By exploring these two ideas, two related goals can be achieved. The first is to draw attention to ways in which current research into social navigation can be made relevant to other areas of research endeavour; and the second is to re-motivate the idea of "social navigation" as a fundamental model for collaboration in information-seeking."
series	other
last changed	2003/04/23 15:50

_id	837b
authors	Elger, Dietrich and Russell, Peter
year	2000
title	Using the World Wide Web as a Communication and Presentation Forum for Students of Architecture
doi	https://doi.org/10.52842/conf.ecaade.2000.061
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 61-64
summary	Since 1997, the Institute for Industrial Building Production (ifib) has been carrying out upper level design studios under the framework of the Netzentwurf or Net-Studio. The Netzentwurf is categorized as a virtual design studio in that the environment for presentation, criticism and communication is web based. This allows lessons learned from research into Computer Supported Cooperative Work (CSCW) to be adapted to the special conditions indigenous to the architectural design studio. Indeed, an aim of the Netzentwurf is the creation and evolution of a design studio planing platform. In the Winter semester 1999-2000, ifib again carried out two Netzentwurf studios. involving approximately 30 students from the Faculty of Architecture, University of Karlsruhe. The projects differed from previous net studios in that both studios encompassed an inter-university character in addition to the established framework of the Netzentwurf. The first project, the re-use of Fort Kleber in Wolfisheim by Strasbourg, was carried out as part of the Virtual Upperrhine University of Architecture (VuuA) involving over 140 students from various disciplines in six institutions from five universities in France, Switzerland and Germany. The second project, entitled "Future, Inc.", involved the design of an office building for a scenario 20 years hence. This project was carried out in parallel with the Technical University Cottbus using the same methodology and program for two separate building sites.
keywords	Virtual Design Studios, Architectural Graphics, Presentation Techniques
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	b34d
authors	Russell, P., Kohler, N., Forgber, U., Koch, V. and Rügemer, J.
year	1999
title	Interactive Representation of Architectural Design: The Virtual Design Studio as an Architectural Graphics Laboratory
doi	https://doi.org/10.52842/conf.ecaade.1999.459
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 459-465
summary	This paper introduces the Virtual Design Studio (VDS), an internet based design studio environment established by ifib. VDS transfers lessons learned through research projects in the field of Computer Supported Co-operative Work (CSCW) being carried out at ifib into design education. By training for interdisciplinary co-operation within the design process, the students will become better prepared for the flexibility and co-operability required in planning situations. Increasing the communication and co-operation in the planning process can be achieved through the implementation of IT based virtual workspaces. In the design studio setting, this is done through the use of available internet software and technologies. The methodology of the VDS is briefly described including specific assignments intended to focus student investigations into specific areas including the representation of their work using the world wide web. The pedagogical expectations are discussed and anecdotal evidence precedes an general evaluation of the teaching method. The authors postulate that one of the unintended by-products of the studio is the evolution of an effective use of interactivity in the presentation of design concepts, ideas and solutions. A handful of student work is presented to describe the different approaches taken in using the world wide web (WWW) to display project work. A description of the local evolution (VDS specific) of graphical methods and technologies is followed by a comparison with those used in traditional settings. Representation is discussed with focus on the ability of the WWW to replace, augment or corrupt other methods of presentation. The interactive nature of web based presentations induces alterations to the narration of architectural work and can enhance the spatial perception of design space. Space Perception can be enabled through geometrically true VRML representations, the inclusion of auditory sensations, the abstraction of representation through the use of advertising techniques as well as the introduction of non-linear narrative concepts. Examples used by students are shown. A critical assessment of these new representational methods and the place of current new media within the context of architectural representation is discussed.
keywords	Virtual Design Studio, Architectural Graphics, Teaching
series	eCAADe
email
last changed	2022/06/07 07:56

_id	7a52
authors	Wong, Wilson and Kvan, Thomas
year	1999
title	Textual support of collaborative design
doi	https://doi.org/10.52842/conf.acadia.1999.168
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 168-176
summary	Discussions of media in architectural design typically revolve around graphical forms, be they digital or analog. For example, much current research addresses the relationship between design sketching and cognitive process affecting the products of individual designers. This emphasis on graphics overshadows the role of text in design. While most CAD tools pursue increasingly realistic computer graphics, the interactions of designing require broader support. In this paper, we consider the importance of text in collaborative architectural design. Text is a common medium to record information in computer technology and has a role to play in an architectural design process. In the collaborative environment, a shared understanding and preserved history are important for communication. In this way, just as graphics can be seen as a cognitive aid, so too can text. Any singular design medium is insufficient to present the design idea thoroughly. Several design media should coexist. This paper outlines the cognitive background graphics in design, then reviews the role of text in design collaboration, drawing upon experimental results from cognitive science and architectural settings. As a conclusion, the paper sets out a direction for future research and development of tools to support collaborative design communication.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	20ab
authors	Yakeley, Megan
year	2000
title	Digitally Mediated Design: Using Computer Programming to Develop a Personal Design Process
source	Massachusetts Institute of Technology, Department of Architecture
summary	This thesis is based on the proposal that the current system of architectural design education confuses product and process. Students are assessed through, and therefore concentrate on, the former whilst the latter is left in many cases to chance. This thesis describes a new course taught by the author at MIT for the last three years whose aim is to teach the design process away from the complexities inherent in the studio system. This course draws a parallel between the design process and the Constructionist view of learning, and asserts that the design process is a constant learning activity. Therefore, learning about the design process necessarily involves learning the cognitive skills of this theoretical approach to education. These include concrete thinking and the creation of external artifacts to develop of ideas through iterative, experimental, incremental exploration. The course mimics the Constructionist model of using the computer programming environment LOGO to teach mathematics. It uses computer programming in a CAD environment, and specifically the development of a generative system, to teach the design process. The efficacy of such an approach to architectural design education has been studied using methodologies from educational research. The research design used an emergent qualitative model, employing Maykut and Morehouses interpretive descriptive approach (Maykut & Morehouse, 1994) and Glaser and Strausss Constant Comparative Method of data analysis (Glaser & Strauss, 1967). Six students joined the course in the Spring 1999 semester. The experience of these students, what and how they learned, and whether this understanding was transferred to other areas of their educational process, were studied. The findings demonstrated that computer programming in a particular pedagogical framework, can help transform the way in which students understand the process of designing. The following changes were observed in the students during the course of the year: Development of understanding of a personalized design process; move from using computer programming to solve quantifiable problems to using it to support qualitative design decisions; change in understanding of the paradigm for computers in the design process; awareness of the importance of intrapersonal and interpersonal communication skills; change in expectations of, their sense of control over, and appropriation of, the computer in the design process; evidence of transference of cognitive skills; change from a Behaviourist to a Constructionist model of learning Thesis Supervisor: William J. Mitchell Title: Professor of Architecture and Media Arts and Sciences, School of Architecture and Planning
series	thesis:PhD
last changed	2003/02/12 22:37

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	e719
authors	Achten, Henri and Turksma, Arthur
year	1999
title	Virtual Reality in Early Design: the Design Studio Experiences
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 327-335
summary	The Design Systems group of the Eindhoven University of Technology started a new kind of design studio teaching. With the use of high-end equipment, students use Virtual Reality from the very start of the design process. Virtual Reality technology up to now was primarily used for giving presentations. We use the same technology in the design process itself by means of reducing the time span in which one gets results in Virtual Reality. The method is based on a very brief cycle of modelling in AutoCAD, assigning materials in 3DStudio Viz, and then making a walkthrough in Virtual Reality in a standard landscape. Due to this cycle, which takes about 15 seconds, the student gets immediate feedback on design decisions which facilitates evaluation of the design in three dimensions much faster than usual. Usually the learning curve of this kind of software is quite steep, but with the use of templates the number of required steps to achieve results is reduced significantly. In this way, the potential of Virtual Reality is not only explored in research projects, but also in education. This paper discusses the general set-up of the design studio and shows how, via short workshops, students acquire knowledge of the cycle in a short time. The paper focuses on the added value of using Virtual Reality technology in this manner: improved spatial reasoning, translation from two-dimensional to three-dimensional representations, and VR feedback on design decisions. It discusses the needs for new design representations in this design environment, and shows how fast feedback in Virtual Reality can improve the spatial design at an early stage of the design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	6d88
authors	Achten, Henri H. and Van Leeuwen, Jos P.
year	1999
title	Feature-Based High Level Design Tools - A Classification
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 275-290
summary	The VR-DIS project aims to provide design support in the early design stage using a Virtual Reality environment. The initial brief of the design system is based on an analysis of a design case. The paper describes the process of analysis and extraction of design knowledge and design concepts in terms of Features. It is demonstrated how the analysis has lead to a classification of design concepts. This classification forms one of the main specifications for the VR-based design aid system that is being developed in the VR-DIS programme. The paper concludes by discussing the particular approach used in the case analysis and discusses future work in the VR-DIS research programme.
keywords	Features, Feature-Based modelling, Architectural Design, Design Process, Design Support
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	becb
authors	Anders, Peter
year	1999
title	Electronic Extension: Some implications of cyberspace for the practice of architecture
doi	https://doi.org/10.52842/conf.acadia.1999.276
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 276-289
summary	This white-paper builds upon previous research to present hybrids of electronic and physical spaces as extensions of current design practice. It poses an hypothetical project - a hybrid of physical and cyberspaces - to be developed through an extrapolation of current architectural practice by fully exploiting new information technologies. The hybrid's attributes not only affect the scope of development but the very activities of the design team and client during - and after - deployment. The entire life cycle of the project is affected by its dual material and media presence. The paper concludes by discussing the effect the hybrid - here called a "cybrid" - on the occupant, and its local and global communities. It reviews the economics, administration, marketing, operation, flexibility, and extension of the project to assess its effects on these scales. The conclusions are provisional owing to the youth of the technologies. However, in laying out these issues, the author hopes to begin a discussion on effects computation will have on our built environment.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ga9926
id	ga9926
authors	Antonini, Riccardo
year	1999
title	Let's Improvise Together
source	International Conference on Generative Art
summary	The creators of ‘Let's-Improvise-Together’ adhere to the idea that while there is a multitude of online games now available in cyberspace, it appears that relatively few are focused on providing a positive, friendly and productive experience for the user. Producing this kind of experience is one the goals of our Amusement Project.To this end, the creation of ‘Let's Improvise Together’ has been guided by dedication to the importance of three themes:* the importance of cooperation,* the importance of creativity, and* the importance of emotion.Description of the GameThe avatar arrives in a certain area where there are many sound-blocks/objects. Or he may add sound "property" to existing ones. He can add new objects at will. Each object may represents a different sound, they do not have to though. The avatar walks around and chooses which objects he likes. Makes copies of these and add sounds or change the sounds on existing ones, then with all of the sound-blocks combined make his personalized "instrument". Now any player can make sounds on the instrument by approaching or bumping into a sound-block. The way that the avatar makes sounds on the instrument can vary. At the end of the improvising session, the ‘composition’ will be saved on the instrument site, along with the personalized instrument. In this way, each user of the Amusement Center will leave behind him a unique instrumental creation, that others who visit the Center later will be able to play on and listen to. The fully creative experience of making a new instrument can be obtained connecting to Active Worlds world ‘Amuse’ and ‘Amuse2’.Animated colorful sounding objects can be assembled by the user in the Virtual Environment as a sort of sounding instrument. We refrain here deliberately from using the word musical instrument, because the level of control we have on the sound in terms of rythm and melody, among other parameters, is very limited. It resembles instead, very closely, to the primitive instruments used by humans in some civilizations or to the experience made by children making sound out of ordinary objects. The dimension of cooperation is of paramount importance in the process of building and using the virtual sounding instrument. The instrument can be built on ones own effort but preferably by a team of cooperating users. The cooperation has as an important corolary: the sharing of the experience. The shared experience finds its permanence in the collective memory of the sounding instruments built. The sounding instrument can be seen also as a virtual sculpture, indeed this sculpture is a multimedial one. The objects have properties that ranges from video animation to sound to virtual physical properties like solidity. The role of the user representation in the Virtual World, called avatar, is important because it conveys, among other things, the user’s emotions. It is worth pointing out that the Avatar has no emotions on its own but it simply expresses the emotions of the user behind it. In a way it could be considered a sort of actor performing the script that the user gives it in real-time while playing.The other important element of the integration is related to the memory of the experience left by the user into the Virtual World. The new layout is explored and experienced. The layout is a permanent editable memory. The generative aspects of Let's improvise together are the following.The multi-media virtual sculpture left behind any participating avatar is not the creation of a single author/artist. The outcome of the sinergic interaction of various authors is not deterministic, nor predictable. The authors can indeed use generative algorythm in order to create the texture to be used on the objects. Usually, in our experience, the visitors of the Amuse worlds use shareware programs in order to generate their texture. In most cases the shareware programs are simple fractals generators. In principle, it is possible to generate also the shape of the object in a generative way. Taking into account the usual audience of our world, we expected visitors to use very simple algorythm that could generate shapes as .rwx files. Indeed, noone has attempted to do so insofar. As far as the music is concerned, the availability of shareware programs that allow simple generation of sounds sequences has made possible, for some users, to generate sounds sequences to be put in our world. In conclusion, the Let's improvise section of the Amuse worlds could be open for experimentation on generative art as a very simple entry point platform. We will be very happy to help anybody that for educational purposes would try to use our platform in order to create and exhibit generative forms of art.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	89bb
authors	Ataman, Osman and Richey, Thomas
year	1999
title	ArchiDATA: A Hypermedia Tool for Architecture
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 496-500
summary	Design is a cooperative activity at several levels. At one level, clients, architects, financiers, and construction engineers and contractors, all play important roles in creating the design for the building. At another level, the design team may contain architects, interior and landscape designers, lighting experts, heating, ventilation, and air-conditioning experts, etc. At a third level, individual architects cooperate with computer-based design tools in creating portions of a complex design. This paper describes an ongoing project called ArchiDATA, in which we are developing a computational Case-Based Design Aid (CBDA) for architectural design. This project, which is collaboration between cognitive scientists and architectural researchers, builds on an artificial intelligence paradigm called case-based reasoning and work in post-occupancy evaluation and other case study research in architecture.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	bd21
authors	Barría Chateau, H., García Alvarado, R., Lagos Vergara, R. and Parra Márquez, J.C.
year	1999
title	Evaluation of Spatial Perception in Virtual Environments
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 145-148
summary	The 3D environments created by computers can be used as a powerful simulation tool for architecture, especially with inmersive devices, but it is necessary to know properly their spatial characteristics to use it effectively. It is also important to consider their possibilities in communication networks and their implications in contemporary architecture. For this reason, the goal of this research is to evaluate the perception of virtual architectonic spaces in relation to the perception of real architectonic spaces. This research is based on the comparison of experiences of university students in a real space (Entrance Hall of Faculty of Economy) and in the same space modeled by a computer. The evaluation considers tests with stereoscopic helmets and interactive navigation, making questionnaires to characterize the sensation of dimensions, relationships and time for an specific activity. The measuring of real and virtual spaces are made through references (furniture, textures, etc.) or by proportional relations between height, width and depth, in different patterns. The experience also reveals mental schemes to perceive the dimension of architectonic space and the orientation in a real and virtual environment. Besides, the research allows to relate the different levels of complexity and information with the understanding of real architectonic space and modeled space.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2570
authors	Barrón, Alicia and Chiarelli, Julia
year	1999
title	Problemática de las Modelizaciones (The Issue of Modeling)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 182-185
summary	The modelization of an architectural fact, generated through a CAD program, doesn't have only the purpose of generating a virtual electronic, but a constructive scale model of geometric nature. It also implies, a conceptualization level and a posture in front of the pattern that makes thinking in other fields besides the formally constructive, such as: the descriptive and geometric patterns, the communicational and the symbolic pattern. We should understand the way the constructive thought is done the message of the model, either for the relationship with the environment and with the human scale, depends not only upon the author, but his elections will be intrinsically related with his cultural baggage, besides its geometric, graphical and technicians data. These databases condition the result of the model, for this reason we analyzed these relationships looking for a good handling of the cultural codes, to achieve a complete communication of the model. In these moments of the "global village", we should consider this problematic as a visceral topic of the architectural representation, to achieve an effective communication, among different cultures, of the models represented.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	bbb9
authors	Blaise, Jean-Yves and Dudek, Iwona
year	1999
title	SOL: Spatial and Historical Web-Based Interface for On Line Architectural Documentation of Krakow's Rynek Gowny
doi	https://doi.org/10.52842/conf.ecaade.1999.700
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 700-707
summary	Our paper presents recent developments of a co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France), specialised in computer science and the HAiKZ Institute of Krakow's Faculty of Architecture, specialised in architectural heritage and conservation. Before undertaking any action to a listed building or interventions in its neighbourhood, it is vital to gain a clear understanding of the building in question. Numerous heterogeneous data detained by diverse institutions has to be handled. This process can be greatly eased by enhanced classification of the information. The development we present is a multidisciplinary platform independent information tool dedicated to education and research. SOL uses an http protocol centred computer architecture connecting a relational database, a VRML 2.0 representation module and a web search interface. It allows searches and updating of the database through a standard text based interface, a VRML 2.0 graphical module and a thematic interface. SOL is experienced on the urban fabric of the Main Square (Rynek Gówny) in Kraków. The choice of a web-centred development, both in the search and updating interface and in the representation module provides platform independence and distant access to the database, and enables successive contributions of students or researchers.
keywords	Web Interface, Database, Architectural Heritage Environment, Information Module, Historical Evolutions
series	eCAADe
email
more	http://alberti.gamsau.archi.fr
last changed	2022/06/07 07:52

_id	6ae4
authors	Borde, A., Miyamoto, J., Barki, J., and Conde, M.
year	1999
title	New Trends In Graphic Representation
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 501-506
summary	In terms of graphic representation, architectural & urban study drawings present some fuzziness related to the multiplicity of scales, to the representation of the urban dynamic and to the means of communicating the contents of these studies for different publics, clearly divided among lay and specialists. Since the 16th century there have been certain stimulating propositions to this theme that have had an enormous, often unacknowleged, impact on the perception and construction of the built environment. Recent experiences in Rio, due to the series of urban projects that are being accomplished, is showing that some architecture offices are adopting new graphic trends in drawings conceived for preliminary studies, diagnoses and inventories. Due to the new possibilities offered by graphic computing they are developing, with diferent softwares, a sort of "patchwork” or "collage” and "sampling” technique for morphological analysis and representantion of places and buildings. This use of graphic computing, as an alternative to the usual realistic depictions that attempts to deal with prosaic simulations of an everyday experience, results in a different type of graphic expression that transcend literalism and appealls to the imagination of the general viewer. It is important to highlight that the analysis of these graphic solutions that attempts to turn visible design problems, could result in the development of new graphic tools that will help the creative design process.
keywords	Graphic Representation, Architecture, Urbanism
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	7674
authors	Bourdakis, Vassilis and Charitos, Dimitrios
year	1999
title	Virtual Environment Design - Defining a New Direction for Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1999.403
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 403-409
summary	This paper considers the design and development of virtual environments (VEs) and the way that it relates to traditional architectural education and practice. The need for practitioners who will contribute to the design of 3D content for multimedia and virtual reality applications is identified. The design of space in a VE is seen as being partly an architectural problem. Therefore, architectural design should play an important role in educating VE designers. Other disciplines, intrinsically related to the issue of VE design, are also identified. Finally, this paper aims at pointing out the need for a new direction within architectural education, which will lead towards a generation of VE architects.
keywords	Virtual Environments, Architectural Design, Architectural Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	5bce
authors	Ceccato, Cristiano
year	1999
title	Evolutionary Design Tools for Mass-Customisation
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 152-156
summary	This paper describes an instance of the author’s ongoing research in the field of Generative Design. The work is based on the premise that computer-aided design (CAD) should evolve beyond its current limitation of one-way interaction, and become a dynamic, intelligent, multi-user environment that encourages creativity and actively supports the evolution of individual, mass-customised designs which exhibit common features. The understanding of fundamental shape-forming processes in nature inspires us to move beyond the existing CAD paradigms and re-examine the way we can benefit from the computers in design. We can use this knowledge to create a new generation of computer-based design tools which use evolutionary search algorithms to generate create a common family of individual designs optimised according to particular criteria, while supporting our design intuition. The author explores this idea by illustrating a research project between the Hong Kong Polytechnic University and Deakin University (Australia). The project implements a multi-user oriented design tool for evolutionary design, which was tailored to produce a simple object such as door handle. The paper first gives a short historical and philosophical to the work, then describes the technical and algorithmic requirements, and implementation of the system. It concludes by describing an experiment in which the system was used on a "live" test group of people to generate individual, mass-customised designs.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	69f5
authors	Chan, C., Maves, J. and Cruz-Neira, C.
year	1999
title	An Electronic Library for Teaching Architectural History
doi	https://doi.org/10.52842/conf.caadria.1999.335
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 335-344
summary	This research project developed an electronic library of significant buildings chosen to represent seven selected periods of Western architectural history: Egyptian (Mortuary temple of Queen Hatshepsut), Greek (Parthenon), Roman (Pantheon), Romanesque (Speyer Cathedral), Gothic (Notre Dame Cathedral), Renaissance (Tempietto), and Modern (Des Moines Art Center). All buildings were reconstructed in their original or intended forms based on plans, drawings, photographs, and historical texts. Two products were generated by this project: (1) materials to be displayed on the World Wide Web, including rendered still images for perception, movies for a visual guide, and Virtual Reality Modeling Language (VRML) models for user navigation; and (2) virtual reality (VR) models to be displayed in the C2 (an improved version of the Cave Automatic Virtual Environment or CAVE facility). The benefits of these VR models displayed on the Web and in the C2 are their easy accessibility at any time from various geographic locations and the immersive experience that enhances viewersÌ understanding of the effects of spatial proportions on form and of colors on materials.
series	CAADRIA
more	http://archvr.design.iastate.edu/miller
last changed	2022/06/07 07:56

For more results click below: