Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 614

Reformat results as: short short into frame detailed detailed into frame

_id	8802
authors	Burry, Mark, Dawson, Tony and Woodbury, Robert
year	1999
title	Learning about Architecture with the Computer, and Learning about the Computer in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1999.374
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 374-382
summary	Most students commencing their university studies in architecture must confront and master two new modes of thought. The first, widely known as reflection-in-action, is a continuous cycle of self-criticism and creation that produces both learning and improved work. The second, which we call here design making, is a process which considers building construction as an integral part of architectural designing. Beginning students in Australia tend to do neither very well; their largely analytic secondary education leaves the majority ill-prepared for these new forms of learning and working. Computers have both complicated and offered opportunities to improve this situation. An increasing number of entering students have significant computing skill, yet university architecture programs do little in developing such skill into sound and extensible knowledge. Computing offers new ways to engage both reflection-in-action and design making. The collaboration between two Schools in Australia described in detail here pools computer-based learning resources to provide a wider scope for the education in each institution, which we capture in the phrase: Learn to use computers in architecture (not use computers to learn architecture). The two shared learning resources are Form Making Games (Adelaide University), aimed at reflection-in-action and The Construction Primer (Deakin University and Victoria University of Wellington), aimed at design making. Through contributing to and customising the resources themselves, students learn how designing and computing relate. This paper outlines the collaborative project in detail and locates the initiative at a time when the computer seems to have become less self-consciously assimilated within the wider architectural program.
keywords	Reflection-In-Action, Design Making, Customising Computers
series	eCAADe
email
last changed	2022/06/07 07:54

_id	f8b5
authors	Oswald, Daniel and Pittioni, Gernot
year	1999
title	AVOCAAD Exercises Facility Management Training on the web A Facility Management Survey Relevance for the Architects Business
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 81-87
summary	Facilities Management (FM) can't be seen as a subject with a specific area of knowledge with exactly defined borders relative to other subjects. Analysing the economic aspects of FM leads to the realisation that building management is experiencing a process of increasing specialisation and professionalism. It is possible to define FM from a variety of different points of origin. One possible approach views FM as an integral solution for the administration of buildings, their commercial activities, and technical maintenance from an economic perspective, during the whole life of a building. FM covers all strategies in order to efficiently provide, adequately operate and adapt buildings, their contents and systems to changing organisational demands. The current practice of limited analysis of specific administrative aspects, e.g. maintenance, is replaced by consideration of all factors that affect costs. Since all costs can be directly traced to space, the perfect procedure requires that FM is practised during the *hole living-cycle, starting with the definition of the program of construction until the day of conversion or demolition. Through successful FM, the real estate can contribute decisively to the improvement of productivity and the quality of life.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2fc7
authors	Forber, U. and Russell, P.
year	1999
title	Interdisciplinary Collaboration in the Virtual Design Studio Design Studio
source	Proceedings of the 17th Annual EAAE Annual Conference, Plymouth UK
summary	Drastic changes in technology and economics currently impact common working structures. Moreover, a fundamental move of western societies from industrial and service oriented societies to information oriented societies can be observed. Like others, the AEC industry is also exposed to the challenge of these fundamental changes, not only regarding an ever growing stock of information on building components and materials, but also because of new methods of collaboration to be applied by all participants. As a result, integrating domain specific knowledge into the design process and conversely, conveying design intentions to domain experts, is meaningful in a constantly growing scale. Utilising advanced technology, a twofold approach in research and education, undertaken at the Institut für Industrielle Bauproduktion (ifib), University of Karlsruhe, is the basis of efforts to create and develop integrating methods of collaboration into the design and planning process. In addition, the integration of AEC practitioners (investors, users, designers, engineers) in the education process provides both drastic changes in the fields of design and construction education of students and a promising approach for life long learning. The focus of this paper is to present the current state of work and to report on experiences gathered during several Virtual Design Studios (VDS) in which multi-disciplinary participants from various Universities and backgrounds were involved. Platforms for the activities are World Wide Web based applications as well as animations, VR, CAD and video conferencing.
series	other
email
last changed	2003/04/23 15:50

_id	6b7d
authors	Mishima, Yoshitaka and Szalapaj, Peter
year	1999
title	ADMIRE: an Architectural Design Multimedia Interaction Resource for Education
doi	https://doi.org/10.52842/conf.ecaade.1999.201
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 201-209
summary	This paper describes the development of a multimedia system called ADMIRE (an Architectural Design Multimedia Interaction Resource for Education), which enables undergraduate students to understand how to analyse existing buildings dynamically, as well as to develop their own initial architectural design theories. The system contains architectural information in the form of fully rendered models, conceptual illustrations created with a range of CAD software, and multimedia presentations showing various design theoretic analyses. Buildings are described with CAD generated images, and architects with profiles and theories. In addition to rendered designs, there are also conceptual models of each building in the system. Conceptual models are simplified forms of original designs in order to support an analytical understanding of buildings according to various analyses, such as structure, light, circulation, unit to whole, geometry, etc. Each conceptual model constitutes a different analysis of each building. The ADMIRE system links each piece of information to another, so that students can explore architecture and learn about it in a dynamic way. This system demonstrates a new way of learning about architectural analysis through dynamic multimedia computer interaction.
keywords	Dynamic Multimedia System, Analytical Models, Interactive Pedagogical Resource
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ee8a
authors	Porrúa, Marina and Rueda, Marta
year	1999
title	Innovación Didáctica. Digitalización de un ejercicio práctico cuya problemática central es la organización de la forma en el espacio bidimensional y la introducción al diseño textil (Didactic Innovation. Digitalization of a practical exercises whose Central Issue is the Organization of Form in Bidimensional Space and the Introduction to the Textile Design)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 285-288
summary	The projectual disciplines must respond with some grade of originality to a approached problem. In order to products of design be creative must be implemented a creative process of design and also from the teaching. The essence of creativity are the variations over a subject. A pedagogic way for this, is the one to recognise, individualise and represent the problem attributes, building upon them an "exploration space", to analyse and create new combinatorial alternatives or restructuring of the problem. The digital media incorporation as a new proyectual environment approaches the interactivity not only of the combinatorial variables, but, also to the hypermedia's. Both the digital documents, as the creative process, have a "no linear" or a "net" structure, that allows the construction of a himself way, self-managemented into this structure. The interactivity makes possible to work, as the divergent thought does, in a "polydirectional" field, that stimulates the fluency, the flexibility and the originality. The new- media's, used as didactic tool, open to "action", allow the students to convert them in "co- author", together professors, about themself learning process. >From this educational conception and its potential enrichment with the hypermedia, we are designing a project of digitising of an exercise to our didactic proposal and its later application into the course with our students.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	36dc
authors	Reffat, Rabee M. and Gero, John S.
year	1999
title	Situatedness: A New Dimension for Learning Systems in Design
doi	https://doi.org/10.52842/conf.ecaade.1999.252
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 252-261
summary	In this paper we adopt the approach that designing is a series of situated acts, ie designing cannot be pre-planned to completion. This is based on ideas from situated cognition theory that claims that what people perceive, how they conceive and what they do develop together and are adapted to the environment. For a system to be useful for human designers it must have the ability to associate what is learned to its environment. In order for a system to do that such a system must be able to acquire knowledge of the environment that a design constructs. Therefore, acknowledging the notion of situatedness is of importance to provide a system with such capability and add on a new dimension to existing learning systems in design. We will call such a learning system within the design domain a Situated Learning Design System (SLDS). A SLDS should be able to create its own situational categories from its perceptual experiences and modify them if encountered again to link the learned knowledge to its corresponding situation. We have chosen architectural shapes as the vehicle to demonstrate our ideas and used multiple representations to build a platform for a SLDS to learn from. In this paper the notion of situatedness and its role in both designing and learning is discussed. The overall architecture of a SLDS is introduced and how the potential outcome of such a system will support human designers while designing is discussed.
keywords	Designing, Situated Knowledge, Multiple Representations, Situated Learning
series	eCAADe
email
last changed	2022/06/07 08:00

_id	7012
authors	Sheng-Fen, Chien
year	2002
title	Design Gaming, Designing Games - Learning Design through Game Playing and Game Making
doi	https://doi.org/10.52842/conf.ecaade.2002.028
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 28-33
summary	This is an ongoing effort to make design learning fun and constructive. The process of designing, in many respects, is very similar to playing games: exploring possibilities under certain constraints. Since 1999, the “designing as game playing” concept has been used in architectural design studios and related courses in my institution. In the early years, preexisting games or games created by instructors were used. These games were played in a junior-year course that emphasized design decision-making and design collaborations. In recent two years, design game making has been used as a vehicle for senior-year student to strengthen their analytical skills. So far, students have developed games of Mario Botta, Le Corbusier (Villa Savoy), Aldolf Loos, Mies van der Rohe, and Richard Meier. Two more games are underdevelopment: the games of Isosaki and Tadao Ando. Some of these games have been used in freshman-year courses to introduce certain principles of form composition. Playing design games enables students to gain design knowledge as well as to be able to view design constraints constructively as special characteristics on the game board that may turn to their advantages rather than as useless stumbling blocks. Designing games requires students to analyze existing designs in great details as well as to be able to organize certain relationships of these details into operable rules that could produce new designs. The experience of teaching “games and design” to-date has been a very fruitful one. Future work will focus on design gaming for freshman students and game designing for senior students, as well as the interaction between the freshmen (game players) and the seniors (game designers).
series	eCAADe
email
last changed	2022/06/07 07:56

_id	48a7
authors	Brooks
year	1999
title	What's Real About Virtual Reality
source	IEEE Computer Graphics and Applications, Vol. 19, no. 6, Nov/Dec, 27
summary	As is usual with infant technologies, the realization of the early dreams for VR and harnessing it to real work has taken longer than the wild hype predicted, but it is now happening. I assess the current state of the art, addressing the perennial questions of technology and applications. By 1994, one could honestly say that VR "almost works." Many workers at many centers could doe quite exciting demos. Nevertheless, the enabling technologies had limitations that seriously impeded building VR systems for any real work except entertainment and vehicle simulators. Some of the worst problems were end-to-end system latencies, low-resolution head-mounted displays, limited tracker range and accuracy, and costs. The technologies have made great strides. Today one can get satisfying VR experiences with commercial off-the-shelf equipment. Moreover, technical advances have been accompanied by dropping costs, so it is both technically and economically feasible to do significant application. VR really works. That is not to say that all the technological problems and limitations have been solved. VR technology today "barely works." Nevertheless, coming over the mountain pass from "almost works" to "barely works" is a major transition for the discipline. I have sought out applications that are now in daily productive use, in order to find out exactly what is real. Separating these from prototype systems and feasibility demos is not always easy. People doing daily production applications have been forthcoming about lessons learned and surprises encountered. As one would expect, the initial production applications are those offering high value over alternate approaches. These applications fall into a few classes. I estimate that there are about a hundred installations in daily productive use worldwide.
series	journal paper
email
last changed	2003/04/23 15:14

_id	bsct_islami
id	bsct_islami
authors	Islami, Agron
year	2007
title	A Systematic Approach to Thermal Adaptation of Detached Single Family Buildings in Kosovo
source	Vienna University of Technology; Building Science & Technology
summary	The research focuses on thermal behaviour of non-insulated single detached family units in the region of Kosovo. The region has experienced a massive construction of illegal housing especially after the conflict of 1999. Such construction resulted in poor thermal behaviour of the houses due to the lack of insulation. The poor thermal behaviour resulted in degradation of thermal comfort for the inhabitants of the houses. This phenomenon occurs due to energy savings to heat the house or more accurately, a specific part of the house. The simulation is based on parametric studies in an hourly basis to compute the thermal behavior of three specific houses. The first simulation is performed on a non-insulated house whereas the other simulations are performed with improved thermal insulation in order to understand the importance of a thermal envelope and its impact in this type of houses. The generated results emphasize the energy savings if thermal envelope is improved in existing houses. Simulation program “TAS” was used to extract figures and numbers related to the cases.The research aims to inform the local population on possibilities for increasing the thermal performances of their houses by improvement of the thermal envelope. It raises the quality of living in their dwellings as well as the quality of the environment, subject to a considerable degradation caused by pollution, generated by the outworn power thermal power plants in Kosovo.
keywords	Building performance, Non-insulated house, Thermal comfort, Heating, Parametric calculations
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	04fd
authors	Karhu, V. and Lahdenpera, P.
year	1999
title	A formalised process model of current Finnish design and construction practice
source	The Int. Journal of Construction IT 7(1), pp. 51-71
summary	There is a need for improved co-ordination to enhance the performance of the building process. The process involves many parties and the communication and interfaces need special attention. Conventionally, the processes of parties are carried out independently, each discipline having its own activities and limits. As a precursor to improving the overall process, formal process modelling may be used to clarify the activities, information flows and the responsibilities of the different parties. The model presented in this paper divides the Finnish construction process into six main stages: briefing, programming, global design, detailed design, construction and hand-over. In developing the model, all these stages were covered - the main focus being on the functions and flows of the process since these were found to be the most critical in the development of the building procedures. The IDEF0 method was used as the modelling technique. It is shown how the developed reference model can be subjected to various view-dependent examinations and that the modelling approach supports process re-engineering and improvement efforts as well as a new means of building process management, especially when combined with modern computer-aided applications.
series	journal paper
last changed	2003/05/15 21:45

_id	bacd
authors	Abadí Abbo, Isaac
year	1999
title	APPLICATION OF SPATIAL DESIGN ABILITY IN A POSTGRADUATE COURSE
source	Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 75-82
summary	Spatial Design Ability (SDA) has been defined by the author (1983) as the capacity to anticipate the effects (psychological impressions) that architectural spaces or its components produce in observers or users. This concept, which requires the evaluation of spaces by the people that uses it, was proposed as a guideline to a Masters Degree Course in Architectural Design at the Universidad Autonoma de Aguascalientes in Mexico. The theory and the exercises required for the experience needed a model that could simulate spaces in terms of all the variables involved. Full-scale modeling as has been tested in previous research, offered the most effective mean to experiment with space. A simple, primitive model was designed and built: an articulated ceiling that allows variation in height and shape, and a series of wooden panels for the walls and structure. Several exercises were carried out, mainly to experience cause -effect relationships between space and the psychological impressions they produce. Students researched into spatial taxonomy, intentional sequences of space and spatial character. Results showed that students achieved the expected anticipation of space and that full-scale modeling, even with a simple model, proved to be an effective tool for this purpose. The low cost of the model and the short time it took to be built, opens an important possibility for Institutions involved in architectural studies, both as a research and as a learning tool.
keywords	Spatial Design Ability, Architectural Space, User Evaluation, Learning, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:27

_id	e719
authors	Achten, Henri and Turksma, Arthur
year	1999
title	Virtual Reality in Early Design: the Design Studio Experiences
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 327-335
summary	The Design Systems group of the Eindhoven University of Technology started a new kind of design studio teaching. With the use of high-end equipment, students use Virtual Reality from the very start of the design process. Virtual Reality technology up to now was primarily used for giving presentations. We use the same technology in the design process itself by means of reducing the time span in which one gets results in Virtual Reality. The method is based on a very brief cycle of modelling in AutoCAD, assigning materials in 3DStudio Viz, and then making a walkthrough in Virtual Reality in a standard landscape. Due to this cycle, which takes about 15 seconds, the student gets immediate feedback on design decisions which facilitates evaluation of the design in three dimensions much faster than usual. Usually the learning curve of this kind of software is quite steep, but with the use of templates the number of required steps to achieve results is reduced significantly. In this way, the potential of Virtual Reality is not only explored in research projects, but also in education. This paper discusses the general set-up of the design studio and shows how, via short workshops, students acquire knowledge of the cycle in a short time. The paper focuses on the added value of using Virtual Reality technology in this manner: improved spatial reasoning, translation from two-dimensional to three-dimensional representations, and VR feedback on design decisions. It discusses the needs for new design representations in this design environment, and shows how fast feedback in Virtual Reality can improve the spatial design at an early stage of the design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	7da7
authors	Benedetti, Cristina and Salvioni, Giulio
year	1999
title	The Use of Renewable Resource in Architecture: New Teaching Methodologies
doi	https://doi.org/10.52842/conf.ecaade.1999.751
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 751-756
summary	The program is organized into four parts. Each is very much connected, both logically and methodologically, so that the unit as a whole consists of a content and method of access that are not divided up. This method is not in a chronological order that simply goes in one direction, rather it allows the user to "refer back", in real time and in different directions. For the simple purpose of explanation, the sections of the program are listed as follows: (-) "Basic information" concerns the basics of bioclimatic and timber architecture. Without this knowledge, the other two sections would be difficult to understand; (-) "Actual buildings throughout the world"; give examples of architectural quality; they concretize the basics of bioclimatic and timber architecture; (-) "Students' Masters Theses", that follow on from the basic information and the learning experience "in the field", and guided by the lecturer, have a critical approach to actual buildings throughout the world. (-) A multimedia data-sheet organized to ensure a clear and straightforward presentation of information about the construction products. It relies on a tab-based navigation interface that gives users access to eight different stacked windows.
keywords	Architecture, Multimedia, Timber, Bioclimatic, Classification
series	eCAADe
email
last changed	2022/06/07 07:54

_id	f58e
authors	Bugay, Edson Luiz and Ulbricht, Vania Ribas
year	1999
title	Hipermidia para Ensino de Render no AutoCad 14 (Hypermedia for the Tachinf of Render 14 AutoCad)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 280-284
summary	Hypermedia applications in education have grown very much and are nowadays available in a great variety of titles covering a major extension of topics. However most of these applications have not gathered too much pedagogic embodiment and when they do have it, it is rather nearly to the intuitive level than based on one or more pedagogic theories. This paper's objective is to provide a practical view of hypermedia directed to teaching which has formed the development basis of a prototype for teaching render in Autocad 14. The several stages' view of developing an hypermedia were considered in the process of the prototype's creation such as the theme's definition, the staffs composition, the metaphor's choice, and the pedagogic model are discussed in details, as well as the several stages that should be followed since the proposals beginning until the product's final distribution. The chosen metaphor is the one of an art study having in mind the meaning of the word "render" being "the artistic representation of a model" once defined the metaphor, the screen's graphical part were developed accordingly.
keywords	Hypermedia, Rendering, Learning, Teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	1206
authors	Cabezas, M., Mariano, C., Mitolo, S. and Oliva, S.
year	1999
title	Transformaciones en el Proceso Enseñanza-Aprendizaje de la Geometría Descriptiva con la Apliacación de los Medios Digitales (Transformations in the Teaching/Learning Process of Descriptive Geometry with the Aplplication of Digital Media)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 347-348
summary	The insert of the digital technologies in the atmosphere Áulico has left generalizing in a significant way. An example constitutes it the high percentage of students that they manifested general knowledge in the software handling in the introductory course of visual communication, as well as the voluntary presentation of practical works developed with digital means. The necessity of an answer to the requirements that arise of the students sinks to the certainty of a pedagogic compatibility among the matter to try and the teaching attended by the personal computer that would increase the Iconidad and the understanding of a topic of certain complexity like it is the geometry of the space. An educational program designed for the teaching of the Sistema Monge whose general characteristics were presented in the II Ibero-American Seminar of Digital Graph and that it will be applied as experience pilot in the course 2000, it will allow us to respond to the following queries: what place it will be given to the educational program in the formation process in connection with the other pedagogic means.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	a9b0
authors	Cha, Myung Yeol and Gero, John
year	1999
title	Style Learning: Inductive Generalisation of Architectural Shape Patterns
doi	https://doi.org/10.52842/conf.ecaade.1999.629
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 629-644
summary	Art historians and critics have defined the style as common features appeared in a class of objects. Abstract common features from a set of objects have been used as a bench mark for date and location of original works. Common features in shapes are identified by relationships as well as physical properties from shape descriptions. This paper will focus on how the computer recognises common shape properties from a class of shape objects to learn style. Shape representation using schema theory has been explored and possible inductive generalisation from shape descriptions has been investigated.
keywords	Style, Inductive Generalisation, Knowledge Representation, Shape
series	eCAADe
email
last changed	2022/06/07 07:55

_id	0dc3
authors	Chambers, Tom and Wood, John B.
year	1999
title	Decoding to 2000 CAD as Mediator
doi	https://doi.org/10.52842/conf.ecaade.1999.210
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 210-216
summary	This paper will present examples of current practice in the Design Studio course of the BDE, University of Strathclyde. The paper will demonstrate an integrated approach to teaching design, which includes CAD among other visual communication techniques as a means to exploring design concepts and the presentation of complex information as part of the design process. It will indicate how the theoretical dimension is used to direct the student in their areas of independent study. Projects illustrated will include design precedents that have involved students in the review and assessment of landmarks in the history of design. There will be evidence of how students integrate DTP in the presentation of site analysis, research of appropriate design precedents and presentation of their design solutions. CADET underlines the importance of considering design solutions within the context of both our European cultural context and of assessing the environmental impact of design options, for which CAD is eminently suited. As much as a critical method is essential to the development of the design process, a historical perspective and an appreciation of the sophistication of communicative media will inform the analysis of structural form and meaning in a modem urban context. Conscious of the dynamic of social and historical influences in design practice, the student is enabled "to take a critical stand against the dogmatism of the school "(Gadamer, 1988) that inevitably insinuates itself in learning institutions and professional practice.
keywords	Design Studio, Communication, Integrated Teaching
series	eCAADe
email
last changed	2022/06/07 07:56

_id	1ea1
authors	Cheng, Nancy Yen-wen
year	1999
title	Digital Design at UO
doi	https://doi.org/10.52842/conf.acadia.1999.x.l0k
source	ACADIA Quarterly, vol. 18, no. 4, p. 18
summary	University of Oregon Architecture Department has developed a spectrum of digital design from introductory methods courses to advanced design studios. With a computing curriculum that stresses a variety of tools, architectural issues such as form-making, communication, collaboration,theory-driven design, and presentation are explored. During the first year, all entering students are required to learn 3D modeling, rendering, image-processing and web-authoring in our Introduction to Architectural ComputerGraphics course. Through the use of cross-platform software, the two hundred beginning students are able to choose to work in either MacOS or Windows. Students begin learning the software by ‘playing’ with geometric elements and further develop their control by describing assigned architectural monuments. In describing the monuments, they begin with 2D diagrams and work up to complete 3D compositions, refining their modelswith symbol libraries. By visualizing back and forth between the drafting and modeling modes, the students quickly connect orthogonal plans and sections with their spatial counterparts. Such connections are an essential foundation for further learning.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	5a10
authors	Cheng, Nancy Yen-Wen
year	1999
title	Playing with Digital Media: Enlivening Computer Graphics Teaching
doi	https://doi.org/10.52842/conf.acadia.1999.096
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 96-109
summary	Are there better ways of getting a student to learn? Getting students to play at learning can encourage comprehension by engaging their attention. Rather than having students' fascination with video games and entertainment limited to competing against learning, we can direct this interest towards learning computer graphics. We hypothesize that topics having a recreational component increase the learning curve for digital media instruction. To test this, we have offered design media projects with a playful element as a counterpart to more step-by-step descriptive exercises. Four kinds of problems, increasing in difficulty, are discussed in the context of computer aided architectural design education: 1) geometry play, 2) kit of parts, 3) dreams from childhood and 4) transformations. The problems engage the students in different ways: through playing with form, by capturing their imagination and by encouraging interaction. Each type of problem exercises specific design skills while providing practice with geometric modeling and rendering. The problems are sequenced from most constrained to most free, providing achievable milestones with focused objectives. Compared to descriptive assignments and more serious architectural problems, these design-oriented exercises invite experimentation by lowering risk, and neutralize stylistic questions by taking design out of the traditional architectural context. Used in conjunction with the modeling of case studies, they engage a wide range of students by addressing different kinds of issues. From examining the results of the student work, we conclude that play as a theme encourages greater degree of participation and comprehension.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	2f1a
authors	Dabney, M.K., Wright, J.C. and Sanders, D.H.
year	1999
title	Virtual Reality and the Future of Publishing Archaeological Excavations: the multimedia publication of the prehistoric settlement on Tsoungiza at Ancient Nemea
source	New York: The Metropolitan Museum of Art
summary	The Nemea Valley Archaeological Project is a study of settlement and land use in a regional valley system in Greece extending from the Upper Paleolithic until the present. Active field research was conducted by four teams between 1981 and 1990. The first component was a regional archaeological survey. Second, and closely related to the first, was a social anthropological study of modern settlement and land use. Next was a team assigned to excavate the succession of prehistoric settlements of Ancient Nemea on Tsoungiza. Last, historical ecologists, a palynologist, and a geologist formed the environmental component of the research. As a result of advances in electronic publishing, plans for the final publication of the Nemea Valley Archaeological Project have evolved. Complete publication of the excavation of the prehistoric settlements of Ancient Nemea on Tsoungiza will appear in an interactive multimedia format on CD/DVD in Fall 2000. This project is planned to be the first electronic publication of the American School of Classical Studies at Athens. We have chosen to publish in electronic format because it will meet the needs and interests of a wider audience, including avocational archaeologists, advanced high school and college students, graduate students, and professional archaeologists. The multimedia format on CD/DVD will permit the inclusion of text, databases, color and black-and-white images, two and three-dimensional graphics, and videos. This publication is being developed in cooperation with Learning Sites, Inc., which specializes in interactive three-dimensional reconstructions of ancient worlds http://www.learningsites.com. The Nemea Valley Archaeological Project is particularly well prepared for the shift towards electronic publishing because the project's field records were designed for and entered in computer databases from the inception of the project. Attention to recording precise locational information for all excavated objects enables us to place reconstructions of objects in their reconstructed architectural settings. Three-dimensional images of architectural remains and associated features will appear both as excavated and as reconstructed. Viewers will be able to navigate these images through the use of virtual reality. Viewers will also be able to reference all original drawings, photographs, and descriptions of the reconstructed architecture and objects. In this way a large audience will be able to view architectural remains, artifacts, and information that are otherwise inaccessible.
series	other
last changed	2003/04/23 15:14

For more results click below: