Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 154

Reformat results as: short short into frame detailed detailed into frame

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ga0010
id	ga0010
authors	Moroni, A., Zuben, F. Von and Manzolli, J.
year	2000
title	ArTbitrariness in Music
source	International Conference on Generative Art
summary	Evolution is now considered not only powerful enough to bring about the biological entities as complex as humans and conciousness, but also useful in simulation to create algorithms and structures of higher levels of complexity than could easily be built by design. In the context of artistic domains, the process of human-machine interaction is analyzed as a good framework to explore creativity and to produce results that could not be obtained without this interaction. When evolutionary computation and other computational intelligence methodologies are involved, every attempt to improve aesthetic judgement we denote as ArTbitrariness, and is interpreted as an interactive iterative optimization process. ArTbitrariness is also suggested as an effective way to produce art through an efficient manipulation of information and a proper use of computational creativity to increase the complexity of the results without neglecting the aesthetic aspects [Moroni et al., 2000]. Our emphasis will be in an approach to interactive music composition. The problem of computer generation of musical material has received extensive attention and a subclass of the field of algorithmic composition includes those applications which use the computer as something in between an instrument, in which a user "plays" through the application's interface, and a compositional aid, which a user experiments with in order to generate stimulating and varying musical material. This approach was adopted in Vox Populi, a hybrid made up of an instrument and a compositional environment. Differently from other systems found in genetic algorithms or evolutionary computation, in which people have to listen to and judge the musical items, Vox Populi uses the computer and the mouse as real-time music controllers, acting as a new interactive computer-based musical instrument. The interface is designed to be flexible for the user to modify the music being generated. It explores evolutionary computation in the context of algorithmic composition and provides a graphical interface that allows to modify the tonal center and the voice range, changing the evolution of the music by using the mouse[Moroni et al., 1999]. A piece of music consists of several sets of musical material manipulated and exposed to the listener, for example pitches, harmonies, rhythms, timbres, etc. They are composed of a finite number of elements and basically, the aim of a composer is to organize those elements in an esthetic way. Modeling a piece as a dynamic system implies a view in which the composer draws trajectories or orbits using the elements of each set [Manzolli, 1991]. Nonlinear iterative mappings are associated with interface controls. In the next page two examples of nonlinear iterative mappings with their resulting musical pieces are shown.The mappings may give rise to attractors, defined as geometric figures that represent the set of stationary states of a non-linear dynamic system, or simply trajectories to which the system is attracted. The relevance of this approach goes beyond music applications per se. Computer music systems that are built on the basis of a solid theory can be coherently embedded into multimedia environments. The richness and specialty of the music domain are likely to initiate new thinking and ideas, which will have an impact on areas such as knowledge representation and planning, and on the design of visual formalisms and human-computer interfaces in general. Above and bellow, Vox Populi interface is depicted, showing two nonlinear iterative mappings with their resulting musical pieces. References [Manzolli, 1991] J. Manzolli. Harmonic Strange Attractors, CEM BULLETIN, Vol. 2, No. 2, 4 -- 7, 1991. [Moroni et al., 1999] Moroni, J. Manzolli, F. Von Zuben, R. Gudwin. Evolutionary Computation applied to Algorithmic Composition, Proceedings of CEC99 - IEEE International Conference on Evolutionary Computation, Washington D. C., p. 807 -- 811,1999. [Moroni et al., 2000] Moroni, A., Von Zuben, F. and Manzolli, J. ArTbitration, Las Vegas, USA: Proceedings of the 2000 Genetic and Evolutionary Computation Conference Workshop Program – GECCO, 143 -- 145, 2000.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	alqawasmi
id	alqawasmi
authors	Al-Qawasmi, J., Clayton, M.J., Tassinary, L.G. and Johnson, R..
year	1999
title	Observations on Collaborative Design and Multimedia Usage in Virtual Design Studio
source	J. Woosely and T. Adair (eds.), Learning virtually: Proceedings of the 6th annual distance education conference, San Antonio, Texas, pp. 1-9
summary	The virtual design studio (VDS) points to a new way of practicing and teaching architectural design. As a new phenomenon, little research has been done to evaluate design collaboration and multimedia usage in a distributed workplace like the virtual design studio. Our research provides empirical data on how students actually use multiple media during architectural collaborative design.
series	other
email
last changed	2003/12/06 09:55

_id	e4a7
authors	Espina B., Jane J.
year	2001
title	La tecnologia digital en las edificaciones arquitectonicas de la modernidad [The Digital Tecnology In Modern Architectural Constructions]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 136-145
summary	This paper gives an overview of the experience developed by Computer Graphics II course of department of Communication in School of Architecture and Design of University of Zulia which was initiated since 1999.The work describes the methodology used by two groups of objectives: general of the course and those generated by experiences in two levels: one as analysis instruments and the other one during process of design. Course is looking for trainning in CAD system uses by 3D representation of modern buildings, so at the end of the experience students were succeed : 1) analysis of projects of modern architecture, 2) quick visualization and efficient volumetric representation, 3) make a digital format library of differents buildings of the city and 4) comprehension and historic knowledge of city. CAD systems used for representation of 2d and 3D drawings offer to architects tools as color, textures, shadows, plus generation of different points of view as isometrics, perspectives and realistic representations. The digital format of the selected buildings gives to drafts an additional value.
keywords	Modern Architecture; Three-Dimensional; Realistic Representation; CAD Systems; Digital Format
series	other
email
last changed	2003/02/14 08:29

_id	ecb2
authors	Kalay, Yehuda E.
year	1999
title	The Future of CAAD: From Computer-Aided Design to Computer-Aided Collaboration
source	Llavaneras S., Gustavo J. and Negrón P., Enssa (eds.), 1ra Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Caracas (Venezuela) 1-3 december 1999, pp. 19-28
summary	The primary uses of computers in the construction industry have been shifting, over the past four decades, from the evaluation of proposed design solutions, to their graphical (and other) representation, and more recently to facilitating collaboration among the various professionals who are involved in the design process. This paper argues that what may appear to be shifts in emphasis actually represents convergence on a single, original goal: the use of computers to help designers (and others who are involved in the design decision making process) to assess the quality, desirability, and the implications of their creations. Such assistance requires representation, communication, and analysis. The paper goes on to show how these individual parts can be joined into an integrated collaborative design environment, where they build upon and strengthen each other. Moreover, the paper argues that this convergence represents the future of CAAD research and development.
series	other
email
last changed	2002/12/23 14:11

_id	ga9917
id	ga9917
authors	Maia Jr., A., Valle, R. do, Manzolli, J. and Pereira, L.N.S.
year	1999
title	Generative Polymodal Music Process
source	International Conference on Generative Art
summary	We present underlying ideas used to develop an Algorithmic Composition software named KYKLOS. It was designed to generate music based on generalised musical scales and modes. It is an interactive sonic device to be applied in composition as well in performance. The sonic output of the whole process can be described as generalised polymodal music since “synthetic scales” are generated by the algorithm. This environment can be used in a Computer Assisted Composition manner in order to generate MIDI files. On the other hand, it can equally be used as a performance environment in which a dynamic change of parameters enables a real time control of the sonic process. Recently, we advocated that several mathematical applications in Computer Music can be understood as Sound Functors [1]. In extension, we describe here a sound functor used to model scales and modes. As can be verified, part of early investigations on mathematical structures in music studied musical scales and modes using Combinatorics, Fibonacci Series and Golden Mean in order to understand compositional processes which use modal concepts. Using the Functor definition it is possible to enumerate n-scales as a sequence of integers. Each value in that sequence gives the distance (in half tones) between two consecutive tones. For example, the sequence 3:2:2:3 is interpreted as a pentatonic scale C-Eb-F-G-Bb, and as defined above it is a C mode. So, if we apply cyclical permutations, (n-1)-sequences of numbers should be interpreted as n-modes of tones. Our algorithmic implementation is described briefly. A n-mode is defined as an array with n-1 integers [a1, a2, ...an-1]. Each array generated at k-th step can be read as a number a1a2a3 ....an-1 in decimal representation, where ai is a integer between 1 and 9. We denote the number obtained at k-th step as (a1a2a3 ...an-1)(k) . The rules to implement the algorithm are the following:1) V0 = (1, 1, 1, 1 ......,1) (initial n-mode)2) ? ai ? 11 with i= 1, 2...n-1 (octave range constraint)3) Vk = (a1a2a3 ...an-1)(k) < (b1b2b3 ...bn-1)(k+1) = Vk+1 where aj ?bj , 1? j ? n-1.4) Vmax = (13 – n, 1, 1, ...,1)In this paper we start with a theoretical view and an introduction on the algorithmic mechanism used. Further, we present a concept of man ? machine interaction used to create the composition environment. We also describe the compositional graphic interface developed and general functions of the system. Finally there is a set of music examples generated by KYKLOS as MIDI files.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	8666
authors	Martínez, A.C., Vigo, L., Cabral, J., Folchi, A. and Palacio, M.
year	2000
title	Seminario/Taller de Investigacón Proyectual:Estructura de taller activo para enseñar a proyectar asistido por la tipología y de software de mercado (Design Research Seminar/Workshop: A Structure of Active Studio for the Teaching of Design Aided by Typology and Commercial Software)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 377-379
summary	General outline: Typology has provided architects basic design resources in the past. Repertories have been created by comparing and establishing relations among a multiplicity of examples: these repertories have been used as the basis for new inventions. Research on type establishes the foundations for organized knowledge that can be accumulated, shared, and enriched by successive designs. We are testing our assumption that CAD is a specially adequate tool for the transformation and manipulation of type in the early stages of the design process. Goals: Our Seminar/Studio gives those who take part in it a renewed vision of type as a basic disposition that can be subject to dynamic transformations. The use of CAD will allow the participants to experiment and verify design decisions on the grounds of a systematic use of typological precedents. Methodology: Starting with definite examples of contemporary architecture and the design theory backing the examples selected, the seminar/ studio is developed in eight studio sessions, exploring different dimensions leading to the “parti”. It is meant for experienced designers, both advanced students and graduates. The first experimental seminar of two sessions took place in November 1999. A more developed version is under way in August, 2000.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	6476
authors	Maver, T., Petric, J., Ennis, G. and Lindsay, M.
year	2000
title	Visiting The Virtual City
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 135-139
summary	In 1999, the city of Glasgow in Scotland, celebrated the honour of being the UK City of Architecture and Design. The same year saw the successful launch, on the Internet, of a fully interactive virtual experience of the city. This paper describes the evolution and functionality of vrglasgow over the last 10 years and anticipates its future development over the next 5 years. Currently the system comprises the VRML topography, the road network and the 3-D geometry of around 10,000 buildings within the city centre. The visitor to the virtual city to navigate and search under a range of headings for items of interest and experience some of Glasgow’s best architecture. Data from a number of information sources are interlinked and made accessible through VRML as well as through the conventional internet modes such as lists, tables and search engines. Consequently, the visitor can explore the city intuitively.
keywords	3D City modeling
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ab13
authors	Mcfadzean, J., Cross, N. and Johnson, J.H.
year	1999
title	An Analysis of Architectural Visual Reasoning in Conceptual Sketching via Computational Sketch Analysis CSA
source	Proc. International Conference on Information Visualisation, IVí99. IEEE Computer Society, London
summary	Visual reasoning in design is facilitated by sketching. This research investigates how designers sketch, specifically analysing the physical details of mark making. It relates the graphical representations to the abstract cognitive processes of architectural design. A new form of protocol analysis has been developed using video and computer records of designers' sketching activity. The analysis of the resulting data compares the designer's retrospective commentary and interpretations of the sketching activity with the computer's record of that activity. The analysis will lead to a greater understanding of the relationships between 'Design Events' and 'Graphical Events' and thus how the notational activity of sketching supports the cognitive activity of conceptual design.
series	other
last changed	2003/04/23 15:14

_id	396e
authors	Pereyra, N., Azubel, R., Torroja, A., López Coronel, J.P. and Muñoz, P.
year	1999
title	Do Intelligent Objects Need Programmed Users?
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 52-55
summary	Intelligent objects for daily use offer greater advantages than electromechanical products. However, they need a user whose life is more methodical, programmed and predictable. As de number of services offered in such products increase, their restrictions in their flexibility of use arise. Finally, users adapt themselves to habits that these objects suggest (for better) or prescribe (for worse). However, a paradox exists. What is controversial for a standard user: the increasing passivity justified in the eternal pursuit of comfort, for a disabled person means achieving independence and autonomy. In order to accomplish the revolutionary equity that computer science claims, the possibility of being excluded for economic reasons should not exist. If not, it will increase the fracture between coexistent realities in the same territory. For these reasons, assuming the risk of being considered naive and idealist, we believe that in order to build a better future it is necessary to promote policies that guarantee the access to new technologies for people with low economic means. Together with the consciousness users gain -related to product selection-, it would break the premature discouragement that the markets try to impose, resigning us to an unjustified idea of weakness and submission.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	b34d
authors	Russell, P., Kohler, N., Forgber, U., Koch, V. and Rügemer, J.
year	1999
title	Interactive Representation of Architectural Design: The Virtual Design Studio as an Architectural Graphics Laboratory
doi	https://doi.org/10.52842/conf.ecaade.1999.459
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 459-465
summary	This paper introduces the Virtual Design Studio (VDS), an internet based design studio environment established by ifib. VDS transfers lessons learned through research projects in the field of Computer Supported Co-operative Work (CSCW) being carried out at ifib into design education. By training for interdisciplinary co-operation within the design process, the students will become better prepared for the flexibility and co-operability required in planning situations. Increasing the communication and co-operation in the planning process can be achieved through the implementation of IT based virtual workspaces. In the design studio setting, this is done through the use of available internet software and technologies. The methodology of the VDS is briefly described including specific assignments intended to focus student investigations into specific areas including the representation of their work using the world wide web. The pedagogical expectations are discussed and anecdotal evidence precedes an general evaluation of the teaching method. The authors postulate that one of the unintended by-products of the studio is the evolution of an effective use of interactivity in the presentation of design concepts, ideas and solutions. A handful of student work is presented to describe the different approaches taken in using the world wide web (WWW) to display project work. A description of the local evolution (VDS specific) of graphical methods and technologies is followed by a comparison with those used in traditional settings. Representation is discussed with focus on the ability of the WWW to replace, augment or corrupt other methods of presentation. The interactive nature of web based presentations induces alterations to the narration of architectural work and can enhance the spatial perception of design space. Space Perception can be enabled through geometrically true VRML representations, the inclusion of auditory sensations, the abstraction of representation through the use of advertising techniques as well as the introduction of non-linear narrative concepts. Examples used by students are shown. A critical assessment of these new representational methods and the place of current new media within the context of architectural representation is discussed.
keywords	Virtual Design Studio, Architectural Graphics, Teaching
series	eCAADe
email
last changed	2022/06/07 07:56

_id	d54b
authors	Thomas, N.J.T.
year	1999
title	Are theories of imagery theories of imagination? An active perception approach to conscious mental content
source	Cognitive Science 23(2): 207-245
summary	Can theories of mental imagery, conscious mental contents, developed within cognitive science throw light on the obscure (but culturally very significant) concept of imagination? Three extant views of mental imagery are considered: quasi-pictorial, description, and perceptual activity theories. The first two face serious theoretical and empirical difficulties. The third is (for historically contingent reasons) little known, theoretically underdeveloped, and empirically untried, but has real explanatory potential. It rejects the "traditional" symbolic computational view of mental contents, but is compatible with recent and approaches in robotics. This theory is developed and elucidated. Three related key aspects of imagination (non-discursiveness, creativity, and ) raise difficulties for the other theories. Perceptual activity theory presents imagery as non-discursive and relates it closely to . It is thus well placed to be the basis for a general theory of imagination and its role in creative thought.
series	journal paper
last changed	2003/04/23 15:50

_id	ee8a
authors	Porrúa, Marina and Rueda, Marta
year	1999
title	Innovación Didáctica. Digitalización de un ejercicio práctico cuya problemática central es la organización de la forma en el espacio bidimensional y la introducción al diseño textil (Didactic Innovation. Digitalization of a practical exercises whose Central Issue is the Organization of Form in Bidimensional Space and the Introduction to the Textile Design)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 285-288
summary	The projectual disciplines must respond with some grade of originality to a approached problem. In order to products of design be creative must be implemented a creative process of design and also from the teaching. The essence of creativity are the variations over a subject. A pedagogic way for this, is the one to recognise, individualise and represent the problem attributes, building upon them an "exploration space", to analyse and create new combinatorial alternatives or restructuring of the problem. The digital media incorporation as a new proyectual environment approaches the interactivity not only of the combinatorial variables, but, also to the hypermedia's. Both the digital documents, as the creative process, have a "no linear" or a "net" structure, that allows the construction of a himself way, self-managemented into this structure. The interactivity makes possible to work, as the divergent thought does, in a "polydirectional" field, that stimulates the fluency, the flexibility and the originality. The new- media's, used as didactic tool, open to "action", allow the students to convert them in "co- author", together professors, about themself learning process. >From this educational conception and its potential enrichment with the hypermedia, we are designing a project of digitising of an exercise to our didactic proposal and its later application into the course with our students.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2005_a_7b_c
id	caadria2005_a_7b_c
authors	Chang, Chuang-Ting
year	2005
title	Some Phenomena of Touch in Study Models
doi	https://doi.org/10.52842/conf.caadria.2005.277
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 277-287
summary	The senses of “Touch” bring people the feeling of reality, and human beings can always naturally sense the tactile impression. Hence we touch things and our sense tells us that our hands are touching something (Hinckley et al. 1999). Comparing to the tools used by designers between traditional and new digital media in the design process, the most difference is in the sense of touch. This paper focuses on the sense of touch to point out the haptic experience which have ignored by the past in design process. Four phenomena will be discussed in details and some useful suggestions given for future study.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2007_659
id	caadria2007_659
authors	Chen, Zi-Ru
year	2007
title	The Combination of Design Media and Design Creativity _ Conventional and Digital Media
doi	https://doi.org/10.52842/conf.caadria.2007.x.w5x
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Creativity is always interested in many fields, in particular, creativity and design creativity have many interpretations (Boden, 1991; Gero and Maher, 1992, 1993; Kim, 1990; Sternberg, 1988; Weisberg, 1986). In early conceptual design process, designers used large number of sketches and drawings (Purcell and Gero, 1998). The sketch can inspire the designer to increase the creativity of the designer’s creations(Schenk, 1991; Goldschmidt, 1994; Suwa and Tversky, 1997). The freehand sketches by conventional media have been believed to play important roles in processes of the creative design thinking(Goldschmidt, 1991; Schon and Wiggins, 1992; Goel, 1995; Suwa et al., 2000; Verstijnen et al., 1998; Elsas van and Vergeest, 1998). Recently, there are many researches on inspiration of the design creativity by digital media(Liu, 2001; Sasada, 1999). The digital media have been used to apply the creative activities and that caused the occurrenssce of unexpected discovery in early design processes(Gero and Maher, 1993; Mitchell, 1993; Schmitt, 1994; Gero, 1996, 2000; Coyne and Subrahmanian, 1993; Boden, 1998; Huang, 2001; Chen, 2001; Manolya et al. 1998; Verstijinen et al., 1998; Lynn, 2001). In addition, there are many applications by combination of conventional and digital media in the sketches conceptual process. However, previous works only discussed that the individual media were related to the design creativity. The cognitive research about the application of conceptual sketches design by integrating both conventional and digital media simultaneously is absent.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	caadria2005_b_4b_d
id	caadria2005_b_4b_d
authors	Martin Tamke
year	2005
title	Baking Light: Global Illumination in VR Environments as architectural design tool
doi	https://doi.org/10.52842/conf.caadria.2005.214
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 214-228
summary	As proven in the past, immersive Virtual Environments can be helpful in the process of architectural design (Achten et al. 1999). But still years later, these systems are not common in the architectural design process, neither in architectural education nor in professional work. The reasons might be the high price of e.g. CAVEs, the lack of intuitive navigation and design tools in those environments, the absence of useful and easy to handle design workflows, and the quality constraints of real-time display of 3D models. A great potential for VR in the architectural workflow is the review of design decisions: Display quality, comfortable navigation and realistic illumination are crucial ingredients here. Light is one of the principal elements in architectural design, so design reviews must enable the architect to judge the quality of his design in this respect. Realistic light simulations, e.g. via radiosity algorithms, are no longer the domain of high-end graphic workstations. Today's off-the-shelf hardware and 3D-software provide the architect with high-quality tools to simulate physically correct light distributions. But the quality and impression of light is hard to judge from looking at still renderings. In collaboration with the Institute of Computer Graphics at our university we have established a series of regular design reviews in their immersive virtual environment. This paper describes the workflow that has emerged from this collaboration, the tools that were developed and used, and our practical experiences with global-light-simulations. We share results which we think are helpful to others, and we highlight areas where further research is necessary.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2015_161
id	ecaade2015_161
authors	Papasarantou, Chrissa; Kalaouzis, Giorgos, Pentazou, Ioulia and Bourdakis, Vassilis
year	2015
title	A Spatio-Temporal 3D Representation of a Historic Dataset
doi	https://doi.org/10.52842/conf.ecaade.2015.1.701
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 701-708
summary	Previous research (Bourdakis et al, 2012; Papasarantou et al, 2013) dealt with the problem of creating information visualisation systems capable of combining historical data of MUCIV's database and developing strategies that embed the non-spatial data in spatial models. The database was primarily designed as an experimental flexible spatio-temporal configuration of dynamic visual structures generating a variety of narrations through interaction.The attempt of producing a legible configuration driven by a number of criteria, led to the proposition of two different arrangements, namely the linear and radial array. The aim of this paper is to present the next step on the visualization after redefining both the way that thematic axes and data are visualized and arranged/scattered. Alternate configurations are investigated, based also on theoretical analysis on the conceptualization and perception of information visualization systems (Card et al 1999, Ware, 2004).
wos	WOS:000372317300076
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=74178dba-702a-11e5-aa5b-67bfe1e6502f
last changed	2022/06/07 08:00

For more results click below: