Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 585

Reformat results as: short short into frame detailed detailed into frame

_id	37c2
authors	Ahmad Rafi, M.E.
year	1999
title	Visualisation of Design Using Animation for Virtual Prototyping
doi	https://doi.org/10.52842/conf.ecaade.1999.519
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 519-525
summary	Although recent technology in time-based representation has vastly improved, animation in virtual prototype design field remains the same. Some designers invest a huge amount of money in the latest visualisation and multimedia technology and yet may create even worse animation. They often cramp sequences resulting in many viewers failing to interpret the design positively as they miss a lot of vital information that explains the design. This paper basically reports the importance of film-making understanding for producing good virtual prototype animation. It will be based on a part of a research project on the use of time-based media in architectural practices. It also includes an empirical analysis of several architectural-based documentary films (including an interview with the film director) and past and present computer animation. This paper then concludes with recommendations of good techniques for making animated visualisation relative to the stage at which the animation is produced for better design decision.
keywords	Virtual Prototype, Animation, Time-Based, Film-Making
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2014_146
id	ecaade2014_146
authors	Davide Ventura and Matteo Baldassari
year	2014
title	Grow: Generative Responsive Object for Web-based design - Methodology for generative design and interactive prototyping
doi	https://doi.org/10.52842/conf.ecaade.2014.2.587
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 587-594
summary	This paper is part of the research on Generative Design and is inspired by the ideas spread by the following paradigms: the Internet of Things (Auto-ID Center, 1999) and the Pervasive/Ubiquitous Computing (Weiser, 1993). Particularly, the research describes a number of case studies and, in detail, the experimental prototype of an interactive-design object: “Grow-1”. The general assumptions of the study are as follows: a) Developing the experimental prototype of a smart-design object (Figure 1) in terms of interaction with man, with regard to the specific conditions of the indoor environment as well as in relation to the internet/web platforms. b) Setting up a project research based on the principles of Generative Design.c) Formulating and adopting a methodology where computational design techniques and interactive prototyping ones converge, in line with the principles spread by the new paradigms like the Internet of Things.
wos	WOS:000361385100061
keywords	Responsive environments and smart spaces; ubiquitous pervasive computing; internet of things; generative design; parametric modelling
series	eCAADe
email
last changed	2022/06/07 07:55

_id	5377
authors	Frazer, J.H., Tang, M.X. and Jian, S.
year	1999
title	Towards a Generative System for Intelligent Design Support
doi	https://doi.org/10.52842/conf.caadria.1999.285
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 285-294
summary	In the development of intelligent computer aided design systems, three important issues need to considered. These issues are: how to support the generation of product concepts using evolutionary computation techniques; how to use intelligent databases and constraint management systems for detailed exploration of product embodiment; and how to integrate rapid prototyping facilities for product evaluation. In this paper, we present a brief review of knowledge based design and evolutionary design and discuss ways of integrating both in the development of a generative design system. Based on this review, we present the model and its applications of a generative design system utilizing a number of AI and evolutionary computation techniques. This generative design model is intended to provide a generic computational framework for the development of intelligent design support systems.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	3936
authors	Geroimenko, Vladimir
year	1999
title	Online Photorealistic VR with Interactive Architectural Objects
doi	https://doi.org/10.52842/conf.ecaade.1999.414
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 414-417
summary	This paper describes how Virtual Reality (VR) technologies can be used for modelling photorealistic environments with interactive and changeable architectural content. This application of VR allows us to create photograph-based panoramic models of real places that include a variety of interactive architectural objects and details. The user is able not only to navigate through a virtual environment (look around, up and down, zoom, jump to another viewpoint or location) but also to change buildings or their architectural details by clicking, moving or rotating. The following types of interactive objects are completely integrated with a virtual environment: 2D image-based objects, 3D image-based objects, 3D VRML-based objects and onscreen world controls. The application can be used effectively for teaching, including distance Internet-based education, project presentations and rapid prototyping. A sample VR environment is presented and some of the key creative and technological issues are discussed.
keywords	Virtual Reality Modelling, Architectural Design, Interactive Contents, Photorealistic Environments
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ff8b
authors	Krawczyk, Robert J.
year	1999
title	Virtual Ornaments
doi	https://doi.org/10.52842/conf.acadia.1999.x.m7d
source	ACADIA Quarterly, vol. 18, no. 4, p. 19
summary	A few years ago I began to investigate the concepts of art-to-part and single part custom manufacturing. The original designs had to created on a CAD system either manually or by algorithm and then machine produced without any manual intervention. Rapid prototyping and laser cutting technology were both reviewed and the later selected for possible use. I also had a long time interest in geometric design. At that time one of my CAD classes took some of there window designs, created from a complex series of overlapping circles, arcs, and splines, and had them laser cut. The results were astonishing.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	0a45
authors	Lee, K.
year	1999
title	Principles of CAD/CAM/CAE Systems
source	New York: Addison-Wesley 1999
summary	An Introduction to CAD/CAM/CAE is a timely text with coverage of many modern topics, including: rapid prototyping, virtual engineering, NT-based solid modeling systems, and Web-related issues. This book provides balanced coverage of CAD/CAM (with slightly more emphasis on CAD topics) and bonus coverage of computer-aided engineering (CAE). This book's emphasis on the integration of three related disciplines-CAD, CAM, and CAE-makes it a great theoretical introduction to all subjects from geometric representation to the most sophisticated CAE subjects. Many illustrations and references ground the theory in practical examples. The book also features a unique illustration of the whole product development process through a practical case study that gives readers a clear idea how CAD, CAM, and CAE systems are integrated to accelerate the product development process. This book is carefully targeted toward today's students; topics are introduced in a concise, efficient manner, with mathematical terminology that is kept to a minimum. A background in programming, calculus, and matrix and vector algebra is helpful when using this text.
series	other
last changed	2003/04/23 15:14

_id	ecaade2007_228
id	ecaade2007_228
authors	Pupo, Regiane; Celani, Gabriela
year	2007
title	Trends in Graduate Research on IT & Architecture: a Qualitative Comparison of Tendencies in Brazil and abroad
doi	https://doi.org/10.52842/conf.ecaade.2007.431
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 431-437
summary	Applications of information technology (IT) in the architectural profession have greatly increased in the past decades, ranging nowadays from concept design to automated construction. There are countless applications in the architecture practice that go well beyond representation, such as BIM software, generative design systems, and rapid prototyping and fabrication. For this reason, IT has been a frequent graduate research topic. In the present research academic graduate theses that dealt with IT in architecture since 1999 were surveyed and categorized, with the purpose of comparing the topics, applications and methods that are studied in Brazil and abroad. We hope that the differences found will help Brazilian architecture schools to update their IT curriculum, overcoming old prejudices against the use of computers in the creative phases of design.
keywords	Information technology, architectural design, design process, design education, computational design, CAD
series	eCAADe
email
last changed	2022/06/07 08:00

_id	e199
authors	Simondetti, Alvise
year	1999
title	Remote Computer Generated Physical Prototyping Based Design
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 229-236
summary	This research explores some of the opportunities offered by the field of computer aided design. It differs from much of the research in the field in the sense that it extends beyond the boundaries of the computer screen by building and testing a computational and communication design environment made of computers, computer peripherals and digital communication devices. From our observation of the designer's interaction with the computer generated physical prototyping systems we were able to confirm the unique haptic feedback and understanding of complex three- dimensional geometry. We also found limitations of the environment in relation to evolutionary design. It was clear from those experiments with algorithmically generated design alternatives that potentially terrific opportunities lies in their combination with computer generated physical prototypes and manufacturing systems.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	b0c3
authors	Flanagan, Robert
year	1999
title	Designing by Simulation
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 25-30
summary	This article evaluates ‘simulation’ as a contributing factor in architectural design. While computers enhance simulation, they have yet to transform the art of architecture. A partial explanation is found at the extremes of design processes: Gaudí’s Sagrada Família Cathedral of Barcelona is an empiricist’s culminating achievement -- faith expressed in stone. By contrast, SOM’s Sear’s Tower of Chicago is the modernist monument to rational process -- (financial) faith engineered in steel and glass. Gaudí employed an understanding of the heritage of stone and masonry to fashion his design while SOM used precise relationships of mathematics and steel. However, the designs in both the Sear’s Tower and Sagrada Família are restricted by the solutions inherent in the methods. In contrast, student designs often have no inherent approach to building. While the solution may appear to be evident, the method must often be invented; this is potentially more costly and complex than the design itself. This issue is not new to computers, but its hyper--reality is potentially more complex and disruptive. In evaluating the role of computer simulation in architectural design, this article employs two methods: 1.) Exoskeletal design: A limited collection of connected plates is formed and designed through warping, bending and forming. Reference architect Buckminster Fuller. 2.) Endoskeletal design: Curtain wall construction is taken to its minimalist extreme, using pure structure and membrane. Reference artist Christo.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	045b
authors	Matossian, Michele
year	1999
title	3D Studio Max R3 : Visual QuickStart Guide
source	Peachpit Press
summary	Audiences today are more visually sophisticated than ever before, creating a booming demand for special effects--such as 3D--and people who have the skills to create them. However, 3D software is infinitely more complex (and expensive) than its traditional 2D counterparts. Make the most of your time and financial investment with this guide. This book is the tool of choice for professional artists who use Windows to create 3D images and animations for print, TV, the movies, and the Web. This book gives you clear, step-by-step instructions to all the important features of the program, illustrated with lots of helpful screenshots. For inspiration, there's a full-color gallery of original work created by the author and other accomplished artists.
series	other
last changed	2003/02/26 18:58

_id	1c67
authors	Sanchez, S., Zulueta A., and Barrallo J.
year	1999
title	Bilbao: The Revitalisation of a City
doi	https://doi.org/10.52842/conf.ecaade.1999.694
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 694-699
summary	The city of Bilbao has suffered in the last decade a deep transformation. After a glorious industrial past, Bilbao was in 1990 a depressed city, and the strategies necessary to transform an industrial city into a service capital were no simple due to the high level of pollution and unemployment rate. The "Bilbao Metropoli-30" Association was created to coordinate the synergetic action of all the involved institutions: City Hall, Basque Country and Spanish Governments, financial institutions, transport companies, airport and port, etc. But it was also necessary the acceptance of the public opinion to recover the illusion and the lost pride of the city. The desolated social scene was not adequate for revolutionary designs like the winding Frank Gehry's Bilbao Guggenheim Museum, or the cavernous Norman Foster's underground. This work pretends to show the means and strategies, especially computational, that allowed the transformation of Bilbao with an enthusiastic citizen support.
keywords	Metropolitan Bilbao, City Revitalisation, Architectural Computer Simulation
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ga9923
id	ga9923
authors	Simondetti, Alvise
year	1999
title	Experiments in Rule Based Design and Computer Generated Physical Prototypes
source	International Conference on Generative Art
summary	This paper explores some of the opportunities offered by computer aided design to architects, interior designers and industrial designers. It differs from much of the research in the field in the sense that, it expands out of the boundaries of the computer screen by making computer generated physical prototypes using several different Rapid Prototyping technologies.This paper surveys the author's work at the Department of Architecture, Massachusetts Institute of Technology and more recently the work of his research team at the School of Design, Hong Kong Polytechnic University. The aim of the research is to explore the designer's advantages and limitations using rule based design and rapid prototyping techniques and searching for novel research questions. For each of the experiments proposed I will describe (1) the set up of the experiment (2) the methodology used to conduct the experiments, (3) highlights its advantages and limitations and (4) proposes further possible research questions. Throughout the paper I will focus especially on the unexpected outcomes.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ce86
authors	Von Wodtke, Mark
year	1999
title	Design with Digital Tools : Using New Media Creatively
source	McGraw Hill (Tx)
summary	Now, you can dive into all aspects of digital design confidentlywith this vital skill-building resource. Written by noted designer, educator, and author Mark von Wodtke, this new, perfectly timed book delivers ready-to-use professional guidance on the tools that are revolutionizing the design professions. It can help you and your design team use information technology more effectively and also help you engage your clients online. Use this book in your office, or in courses teaching design and the effective use of new media. With scores of examples, methods, strategies, and techniques, Mark von Wodtke hands you everything you need to work your way through 3-D prototyping, virtual reality environments, CAD programs, multimedia, and much more. In addition, you get hands-on help with the nuts-and-bolts of finding free information and images quickly, applying templates and applets, gaining access to detail, libraries, and smoothing workflow with management and collaborative tools.
series	other
last changed	2003/02/26 18:58

_id	e978
authors	[Zupancic] Strojan, Tadeja Z.
year	1999
title	CyberUniversity
doi	https://doi.org/10.52842/conf.ecaade.1999.196
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 196-200
summary	The study of a cyberuniversity derives from an analogy between real urban space and its virtual "substitution". It represents an attempt to balance some views, which seems to be contrary, exclusive, but they are just parts of the same wholeness. Especially the notion of a cyber society is lately considered such an exaggeration, that it is possible to forget the meaning of a real life experience and interactions, which are already threatened. One should contribute to the awarness that is used in such a comparison, it is "just" an analogy, not a real similarity. At the same time it is possible to point out some limitations of a cyberspace and indicate a more realistic view of the meaning of cyber communities. Awarness of the development processes could help to find a balance between reality and virtuality, using cyberfacilities not to destroy us (our identity) but to improve the quality of our (real) life.
keywords	University, Cyberuniversity, Space, Cyberspace
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	bacd
authors	Abadí Abbo, Isaac
year	1999
title	APPLICATION OF SPATIAL DESIGN ABILITY IN A POSTGRADUATE COURSE
source	Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 75-82
summary	Spatial Design Ability (SDA) has been defined by the author (1983) as the capacity to anticipate the effects (psychological impressions) that architectural spaces or its components produce in observers or users. This concept, which requires the evaluation of spaces by the people that uses it, was proposed as a guideline to a Masters Degree Course in Architectural Design at the Universidad Autonoma de Aguascalientes in Mexico. The theory and the exercises required for the experience needed a model that could simulate spaces in terms of all the variables involved. Full-scale modeling as has been tested in previous research, offered the most effective mean to experiment with space. A simple, primitive model was designed and built: an articulated ceiling that allows variation in height and shape, and a series of wooden panels for the walls and structure. Several exercises were carried out, mainly to experience cause -effect relationships between space and the psychological impressions they produce. Students researched into spatial taxonomy, intentional sequences of space and spatial character. Results showed that students achieved the expected anticipation of space and that full-scale modeling, even with a simple model, proved to be an effective tool for this purpose. The low cost of the model and the short time it took to be built, opens an important possibility for Institutions involved in architectural studies, both as a research and as a learning tool.
keywords	Spatial Design Ability, Architectural Space, User Evaluation, Learning, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:27

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	e719
authors	Achten, Henri and Turksma, Arthur
year	1999
title	Virtual Reality in Early Design: the Design Studio Experiences
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 327-335
summary	The Design Systems group of the Eindhoven University of Technology started a new kind of design studio teaching. With the use of high-end equipment, students use Virtual Reality from the very start of the design process. Virtual Reality technology up to now was primarily used for giving presentations. We use the same technology in the design process itself by means of reducing the time span in which one gets results in Virtual Reality. The method is based on a very brief cycle of modelling in AutoCAD, assigning materials in 3DStudio Viz, and then making a walkthrough in Virtual Reality in a standard landscape. Due to this cycle, which takes about 15 seconds, the student gets immediate feedback on design decisions which facilitates evaluation of the design in three dimensions much faster than usual. Usually the learning curve of this kind of software is quite steep, but with the use of templates the number of required steps to achieve results is reduced significantly. In this way, the potential of Virtual Reality is not only explored in research projects, but also in education. This paper discusses the general set-up of the design studio and shows how, via short workshops, students acquire knowledge of the cycle in a short time. The paper focuses on the added value of using Virtual Reality technology in this manner: improved spatial reasoning, translation from two-dimensional to three-dimensional representations, and VR feedback on design decisions. It discusses the needs for new design representations in this design environment, and shows how fast feedback in Virtual Reality can improve the spatial design at an early stage of the design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	6d88
authors	Achten, Henri H. and Van Leeuwen, Jos P.
year	1999
title	Feature-Based High Level Design Tools - A Classification
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 275-290
summary	The VR-DIS project aims to provide design support in the early design stage using a Virtual Reality environment. The initial brief of the design system is based on an analysis of a design case. The paper describes the process of analysis and extraction of design knowledge and design concepts in terms of Features. It is demonstrated how the analysis has lead to a classification of design concepts. This classification forms one of the main specifications for the VR-based design aid system that is being developed in the VR-DIS programme. The paper concludes by discussing the particular approach used in the case analysis and discusses future work in the VR-DIS research programme.
keywords	Features, Feature-Based modelling, Architectural Design, Design Process, Design Support
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

For more results click below: