Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 626

Reformat results as: short short into frame detailed detailed into frame

_id	b5a1
authors	Snijder, H.P.S. and Daru, R.
year	1999
title	Representing Floorplans for Interactive Evolutionary Design
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 343-346
summary	Computer tools that provide support in the early explorative phase of architectural design are rare. In order to explore the solution space of a design problem, architects in general rely on the use of paper and pencil. We are developing a system which will assist the designer in the exploration of a particular design problem, focusing initially on 2D floorplans. The format chosen for this system is one in which the computer, in interaction with the designer, "evolves" designs. A major obstacle associated with the use of an evolutionary approach is the adequate representation of a floorplan in a genome. We propose a tree-structure in which the nodes represent organising-principles that dictate how the leaves attached to it are organised. Figure 1 shows an example of a tree with four levels; the terminal nodes represent the elements to be placed. The first level no only represents an organising-principle, but also a contour; this contour is either fixed (e.g. dictated by the environment) or free to evolve. On either side of the tree-structure two interpretations of this tree are shown.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	6930
authors	Cattoni, Edson Luis and Santiago, Alina Goncalves
year	1999
title	Lagoa da Conceicao - Florianópolis - Ilha de Santa Catarina: Uma Paisagem em Transformacao II (Conceicao Lagoon - Florianópolis - Ilha of Santa Catarina Island: A Landscape in Transformation II)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 157-160
summary	This work presents the study and applied assays (or simulation tests) about the ordination of urban space in the region of Lagoa da Conceição. In the region pressures placed by the growth of urban area and urban network system are in contact conflict with a fragile ecosystem, and with a sustainable development based on tourism. Analysis procedures exploited different forms of Space Syntax trying to examine effects of spatial structure in relation to movement patterns of pedestrians and vehicles. This methodology allowed the comprehension of relation between spatial configuration, transport and soil use, and reveled the interdependence and performance of built space within the restrict regional scale (Lagoa da Conceição) and the total urban structure of the island. This understanding is not limited to the present. Is also includes the study of historic urban evolution, and simulation of existing projects for the future, being an important tool to support project decision process. Consequently, the obtained results bring a new approach for the problem, which makes possible the synthesis of design proposals verifying its implications and consequences.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ga9916
id	ga9916
authors	Elzenga, R. Neal and Pontecorvo, Michael S.
year	1999
title	Arties: Meta-Design as Evolving Colonies of Artistic Agents
source	International Conference on Generative Art
summary	Meta-design, the act of designing a system or species of design instead of a design instance, is an important concept in modern design practice and in the generative design paradigm. For meta-design to be a useful tool, the designer must have more formal support for both design species definition/expression and the abstract attributes which the designer is attempting to embody within a design. Arties is an exploration of one possible avenue for supporting meta-design. Arties is an artistic system emphasizing the co-evolution of colonies of Artificial Life design or artistic agents (called arties) and the environment they inhabit. Generative design systems have concentrated on biological genetics metaphors where a population of design instances are evolved directly from a set of ‘parent’ designs in a succession of generations. In Arties, the a-life agent which is evolved, produces the design instance as a byproduct of interacting with its environment. Arties utilize an attraction potential curve as their primary dynamic. They sense the relative attraction of entities in their environment, using multiple sensory channels. Arties then associate an attractiveness score to each entity. This attractiveness score is combined with a 'taste' function built into the artie that is sensitized to that observation channel, entity, and distance by a transfer function. Arties use this attraction to guide decisions and behaviors. A community of arties, with independent evolving attraction criteria can pass collective judgement on each point in an art space. As the Artie moves within this space it modifies the environment in reaction to what it senses. Arties support for Meta-design is in (A) the process of evolving arties, breeding their attraction potential curve parameters using a genetic algorithm and (B) their use of sensory channels to support abstract attributes geometries. Adjustment of these parameters tunes the attraction of the artie along various sensing channels. The multi-agent co-evolution of Arties is one approach to creating a system for supporting meta-design. Arties is part of an on-going exploration of how to support meta-design in computer augmented design systems. Our future work with Arties-like systems will be concerned with applications in areas such as modeling adaptive directives in Architecture, Object Structure Design, spatio-temporal behaviors design (for games and simulations), virtual ambient spaces, and representation and computation of abstract design attributes.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	5689
authors	Garcia Alvarado, Rodrigo, Hempel Holzapfel, Ricardo and Parra, Juan Carlos
year	1999
title	Virtual Design for Innovative Timber Structures
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 319-326
summary	The major timber structures have great efficiency and beauty, but not many use in buildings due difficulties to represent and resolve theirs geometrical complexity, regulated by several constructive rules. The spatial richness and attractive of these structures can be a contribution in architecture, and encourage the use of wood. For aid the design and impels innovative solutions we are developing a computer system to program the geometrical regulations and allow a tridimensional visualization of different models with virtual-reality devices. First we are studing the architectural morphology and design process of structures more typically used; beams, trusses, frames and arcs. Establishing theirs proportions, distribution, shapes alternatives and the computational algorithm. In other hand we are evaluating the 3D-visualization in the innovation of designs. Some students of architecture developed in a virtual- system small projects based on other projects designed with traditional media. The models were compare by a panel of professors, considering overall quality and creativity. The results of that experience shows advantages in geometrical innovation, specially in organic shapes user-centered instead of orthogonal compositions. But also some constructive fails, which is necessary to support with related procedures.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	161c
authors	Juroszek, Steven P.
year	1999
title	Access, Instruction, Application: Towards a Universal Lab
doi	https://doi.org/10.52842/conf.ecaade.1999.141
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 141-150
summary	In January 1998, the Montana State University School of Architecture embarked upon an initiative to successfully integrate computer technology into its design curriculum. At that time only a handful of student computers could be found in the design studio. By January 1999 over 95 students have and use computers in their courses. The increase in computer access and use is occurring through a five-phase initiative called the Universal Lab-a school-wide commitment to the full integration of computer technology into all design studios, support courses and architectural electives. The Universal Lab uses the areas of Access, Instruction and Application as the vehicles for appropriate placement and usage of digital concepts within the curriculum. The three-pronged approach allows each instructor to integrate technology using one, two or all three areas with varying degrees of intensity. This paper presents the current status of the Universal Lab-Phase I and Phase II-and describes the effect of this program on student work, course design and faculty instruction.
keywords	Design, Access, Instruction, Application, Integration
series	eCAADe
email
last changed	2022/06/07 07:52

_id	8f39
authors	Laiserin, Jerry
year	1999
title	CAD in Practice Profile: Polshek Partnership Architects LLP
doi	https://doi.org/10.52842/conf.acadia.1999.010
source	ACADIA Quarterly, vol. 18, no. 3, pp. 10-14
summary	Since the advent of computers for architecture, James Stewart Polshek, FAIA, founding partner of Polshek Partnership Architects LLP, has insisted that his firm's technology standards match the same high level they maintain for their awardwinning designs. As explained by Senior Associate Don Weinreich, AIA, this objective translates into computing priorities that differ significantly from those of the average firm. Weinreich observes that many "typical" firms use computer technology for profitability first, consistency of documentation second, and enhancement of the design process last. At Polshek Partnership these priorities are reversed. Supporting and enriching the design process is the overriding objective of all computing activity at the firm. Consistency of documentation, as a second-level priority, is pursued not just for routine coordination and quality control, but in a proactive effort to maintain control over every detail in the process of communicating design intent—in other words, to further support design. The potential to increase profitability through computerization (e.g., by doing the same work in less time) ranks low among the computing priorities at Polshek Partnership. According to Weinreich, "the guiding principle is to do no harm," that is, to exploit the maximum potential of computers to support the design process without incurring additional net costs. In effect, the firm is taking the time and effort that computerization can save on many routine, procedural tasks and reinvesting those savings in additional design studies and details. This approach to computers for design is consistent with that of other AIA Firm Award-winning practices profiled in this series. (1)(2)
series	ACADIA
email
last changed	2022/06/07 07:52

_id	6810
authors	Makkonen, Petri
year	1999
title	On multi body systems simulation in product design
source	KTH Stockholm
summary	The aim of this thesis is to provide a basis for efficient modelling and software use in simulation driven product development. The capabilities of modern commercial computer software for design are analysed experimentally and qualitatively. An integrated simulation model for design of mechanical systems, based on four different "simulation views" is proposed: An integrated CAE (Computer Aided Engineering) model using Solid Geometry (CAD), Finite Element Modelling (FEM), Multi Body Systems Modelling (MBS) and Dynamic System Simulation utilising Block System Modelling tools is presented. A theoretical design process model for simulation driven design based on the theory of product chromosome is introduced. This thesis comprises a summary and six papers. Paper A presents the general framework and a distributed model for simulation based on CAD, FEM, MBS and Block Systems modelling. Paper B outlines a framework to integrate all these models into MBS simulation for performance prediction and optimisation of mechanical systems, using a modular approach. This methodology has been applied to design of industrial robots of parallel robot type. During the development process, from concept design to detail design, models have been refined from kinematic to dynamic and to elastodynamic models, finally including joint backlash. A method for analysing the kinematic Jacobian by using MBS simulation is presented. Motor torque requirements are studied by varying major robot geometry parameters, in dimensionless form for generality. The robot TCP (Tool Center Point) path in time space, predicted from elastodynamic model simulations, has been transformed to the frequency space by Fourier analysis. By comparison of this result with linear (modal) eigen frequency analysis from the elastodynamic MBS model, internal model validation is obtained. Paper C presents a study of joint backlash. An impact model for joint clearance, utilised in paper B, has been developed and compared to a simplified spring-damper model. The impact model was found to predict contact loss over a wider range of rotational speed than the spring-damper model. Increased joint bearing stiffness was found to widen the speed region of chaotic behaviour, due to loss of contact, while increased damping will reduce the chaotic range. The impact model was found to have stable under- and overcritical speed ranges, around the loss of contact region. The undercritical limit depends on the gravitational load on the clearance joint. Papers D and E give examples of the distributed simulation model approach proposed in paper A. Paper D presents simulation and optimisation of linear servo drives for a 3-axis gantry robot, using block systems modelling. The specified kinematic behaviour is simulated with multi body modelling, while drive systems and control system are modelled using a block system model for each drive. The block system model has been used for optimisation of the transmission and motor selection. Paper E presents an approach for re-using CAD geometry for multi body modelling of a rock drilling rig boom. Paper F presents synthesis methods for mechanical systems. Joint and part number synthesis is performed using the Grübler and Euler equations. The synthesis is continued by applying the theory of generative grammar, from which the grammatical rules of planar mechanisms have been formulated. An example of topological synthesis of mechanisms utilising this grammar is presented. Finally, dimensional synthesis of the mechanism is carried out by utilising non-linear programming with addition of a penalty function to avoid singularities.
keywords	Simulation; Optimisation; Control Systems; Computer Aided Engineering; Multi Body Systems; Finite Element Method; Backslash; Clearance; Industrial Robots; Parallel Robots
series	thesis:PhD
last changed	2003/02/12 22:37

_id	eb7a
authors	Porada, Mikhael
year	1999
title	Virtual Analogy and Architecture
doi	https://doi.org/10.52842/conf.ecaade.1999.069
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 69-73
summary	Our fashion of thought is dialogic in its way to use simultaneously logic- mathematics and analogical approaches (Morin, 1986). The analogy works as well at the level of the unconscious by the construction of an analogon that permits us to recognise a face between thousand of others, despite changes intervened in time; as consciously where by an effort of constructive analogy, we establish bridges between different events or domains giving to the design a new lighting that puts it on the way to a solution. For this reason visual approach acquires a great importance in the establishment of similitude in conception. Many testimonies of scientists, philosophers, artists confirm this observation about their creative work, while underlining the danger of no founded analogies. In current life, analogy brings a support of likeness to the daily conversations, and the possibility to advance in the dialogue by a chaining of analogies having for objective to strengthen the speech.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	9dfa
authors	Ries, R. and Mahdavi, A.
year	1999
title	Environmental Life Cycle Assessment in an Integrated CAD Environment: The Ecologue Approach
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 351-363
summary	Construction and operation of buildings is a major cause of resource depletion and environmental pollution. Computational performance evaluation tools could support the decision making process in environmentally responsive building design and play an important role in environmental impact assessment, especially when a life cycle assessment (LCA) approach is used. The building domain, however, presents notable challenges to the application of LCA methods. For comprehensive environmental impact analysis to be realized in a computational support tool for the building design domain, such tools must a) have an analysis method that considers the life cycle of building construction, operation, and decommissioning, b) have a representation that is able to accommodate the data and computability requirements of the analysis method and the analysis tool, and c) be seamlessly integrated within a multi-aspect design analysis environment that can provide data on environmentally relevant building operation criteria. This paper reviews the current state of assessment methods and computational support tools for LCA, and their application to building design. Then, the implementation of an application (ECOLOGUE) for comprehensive computational assessment of environmental impact indicators over the building life cycle is presented. The application is a component in a multi-aspect space-based CAD and evaluation environment (SEMPER). The paper describes the use and typical results of ECOLOGUE system via illustrative examples.
keywords	Life Cycle Assessment, Integrated Computational Environmental Analysis
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	3d23
authors	Sellgren, Ulf
year	1999
title	Simulation-driven Design
source	KTH Stockholm
summary	Efficiency and innovative problem solving are contradictory requirements for productdevelopment (PD), and both requirements must be satisfied in companies that strive to remainor to become competitive. Efficiency is strongly related to ”doing things right”, whereasinnovative problem solving and creativity is focused on ”doing the right things”.Engineering design, which is a sub-process within PD, can be viewed as problem solving or adecision-making process. New technologies in computer science and new software tools openthe way to new approaches for the solution of mechanical problems. Product datamanagement (PDM) technology and tools can enable concurrent engineering (CE) bymanaging the formal product data, the relations between the individual data objects, and theirrelation to the PD process. Many engineering activities deal with the relation betweenbehavior and shape. Modern CAD systems are highly productive tools for conceptembodiment and detailing. The finite element (FE) method is a general tool used to study thephysical behavior of objects with arbitrary shapes. Since a modern CAD technology enablesdesign modification and change, it can support the innovative dimension of engineering aswell as the verification of physical properties and behavior. Concepts and detailed solutionshave traditionally been evaluated and verified with physical testing. Numerical modeling andsimulation is in many cases a far more time efficient method than testing to verify theproperties of an artifact. Numerical modeling can also support the innovative dimension ofproblem solving by enabling parameter studies and observations of real and syntheticbehavior. Simulation-driven design is defined as a design process where decisions related tothe behavior and performance of the artifact are significantly supported by computer-basedproduct modeling and simulation.A framework for product modeling, that is based on a modern CAD system with fullyintegrated FE modeling and simulation functionality provides the engineer with tools capableof supporting a number of engineering steps in all life-cycle phases of a product. Such aconceptual framework, that is based on a moderately coupled approach to integratecommercial PDM, CAD, and FE software, is presented. An object model and a supportingmodular modeling methodology are also presented. Two industrial cases are used to illustratethe possibilities and some of the opportunities given by simulation-driven design with thepresented methodology and framework.
keywords	CAE; FE Method; Metamodel; Object Model; PDM; Physical Behavior, System
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	7cb1
authors	Stuurstraat, N. and Tolman, F.
year	1999
title	A product modeling approach to building knowledge integration
source	Automation in Construction 8 (3) (1999) pp. 269-275
summary	Knowledge informatics is still playing only a minor role in the design process of buildings and civil engineering efforts, particularly in the inception stage. The primary reason that most knowledge tools are not well integrated into the process is that most tend to be based on stand alone expert system technology. Improving the re-use of existing knowledge is required to increase industry performance. A solution could be a new generation of integrated knowledge systems. One problem that must be addressed is how to cope with the conflicting requirements of each particular subsystem when each is optimized for its own knowledge domain. No optimum solution exists that is able to simultaneously optimize each subsystem for a total solution. This paper discusses an approach to building knowledge integration that attempts to address these shortcomings through the use of combined product model and meta-knowledge approach.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	44c0
authors	Van Leeuwen, Jos P.
year	1999
title	Modelling architectural design information by features : an approach to dynamic product modelling for application in architectural design
source	Eindhoven University of Technology
summary	Architectural design, like many other human activities, benefits more and more from the ongoing development of information and communication technologies. The traditional paper documents for the representation and communication of design are now replaced by digital media. CAD systems have replaced the drawing board and knowledge systems are used to integrate expert knowledge in the design process. Product modelling is one of the most promising approaches in the developments of the last two decades, aiming in the architectural context at the representation and communication of the information related to a building in all its aspects and during its complete life-cycle. However, after studying both the characteristics of the product modelling approach and the characteristics of architectural design, it is concluded in this research project that product modelling does not suffice for support of architectural design. Architectural design is characterised mainly as a problem solving process, involving illdefined problems that require a very dynamic way of dealing with information that concerns both the problem and emerging solutions. Furthermore, architectural design is in many ways an evolutionary process. In short term this is because of the incremental approach to problem solving in design projects; and in long term because of the stylistic development of designers and the continuous developments in the building and construction industry in general. The requirements that are posed by architectural design are concentrated in the keywords extensibility and flexibility of the design informationmodels. Extensibility means that designers can extend conceptual models with definitions that best suit the design concepts they wish to utilise. Flexibility means that information in design models can be structured in a way that accurately represents the design rationale. This includes the modelling of incidental characteristics and relationships of the entities in the model that are not necessarily predefined in a conceptual model. In general, product modelling does not adequately support this dynamic nature of design. Therefore, this research project has studied the concepts developed in the technology of Feature-based modelling, which originates from the area of mechanical engineering. These concepts include the usage of Features as the primitives for defining and reasoning about a product. Features have an autonomous function in the information model, which, as a result, constitutes a flexible network of relationships between Features that are established during the design process. The definition of Features can be specified by designers to formalise new design concepts. This allows the design tools to be adapted to the specific needs of the individual designer, enlarging the library of available resources for design. In addition to these key-concepts in Feature-based modelling as it is developed in the mechanical engineering context, the project has determined the following principles for a Feature-based approach in the architectural context. Features in mechanical engineering are used mainly to describe the lowest level of detail in a product's design, namely the characteristics of its parts. In architecture the design process does not normally follow a strictly hierarchical approach and therefore requires that the building be modelled as a whole. This implies that multiple levels of abstraction are modelled and that Features are used to describe information at the various abstraction levels. Furthermore, architectural design involves concepts that are non-physical as well as physical; Features are to be used for modelling both kinds. The term Feature is defined in this research project to reflect the above key-concepts for this modelling approach. A Feature is an autonomous, coherent collection of information, with semantic meaning to a designer and possibly emerging during design, that is defined to formalise a design concept at any level of abstraction, either physical or non-physical, as part of a building model. Feature models are built up entirely of Features and are structured in the form of a directed graph. The nodes in the graph are the Features, whereas the arcs are the relationships between the Features. Features can be of user-defined types and incidental relationships can be added that are not defined at the typological level. An inventory in this project of what kind of information is involved in the practice of modelling architectural design is based on the analysis of a selection of sources of architectural design information. This inventory is deepened by a case study and results in the proposition of a categorisation of architectural Feature types.
keywords	Automated Management Information Systems; Computer Aided Architectural Design; Information Systems; Modelling
series	thesis:PhD
email
more	http://www.ds.arch.tue.nl/jos/thesis/
last changed	2003/02/12 22:37

_id	5f23
authors	Vineeta, Pal
year	1999
title	Integrated Computational Analysis of the Visual Environment in Buildings
source	Carnegie Mellon University, Pittsburgh
summary	Despite significant advances in the area of computational support for lighting design, lighting simulation tools have not been sufficiently integrated into the lighting design process. There is a significant body of designers who rely solely on their individual experience and do not use predictive simulation tools. Even when simulation tools are utilized, it is for design verification or presentation rather than for design support. A number of factors are thought to contribute to this lack of integration of simulation tools into the design process: a) Most existing tools rely on the problematic assumption implying the appropriateness of simplified models for the less complex early design and detailed simulation for the more complex later stages of design; b) They do not support an active exploration of design variables to satisfy desired performance criteria; c) They are not integrated with other building performance simulation models. This thesis addresses the above shortcomings by contributing to the field of visual analysis in the following areas, pertaining to the development of active, integrated design and performance simulation environments: - Implementation of a consistent and coherent, physically-based modeling approach, combining radiosity and ray-tracing methods for the simulation of light propagation. - Provision of design support both in terms of evaluation support for interpreting large amounts of computed data with diverse performance indices, and in terms of active design support to explore the relationships between the design variables and performance indices. - Integration of the lighting simulation module within a larger software environment (SEMPER) for the prediction and evaluation of multiple performance indicators (for energy, light, acoustics, etc.) in buildings.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	504a
authors	Rodrigo Alvarado, García
year	1999
title	Design-Based on VR-Modeling of Environemntal Conditions
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 126-129
summary	The research on CAD has been looking for a long time a creative contribution to architectural design, including recently the use of virtual-reality as an immersive modeling system, but without much practical results. However, contemporary architecture is increasingly including digital characteristics based more on cultural influences than on the use of electronic tools. This shows an evolution of the discipline in relation to digital media and apparently distant from environmental concerns. But the works and reflexions reveal a common convergence in the role of body in architecture as a pivot between virtual and local dimension of design. Based on that relationship we propose to take advantage of virtual-reality for modeling environmental conditions of the location in order to guide architectural design, using for example the potential of representing characteristics not visible in reality or to simulate time cycles. Sun displacement, wind direction, temperature ranges, topography and landscape are specific conditions in design that define energy consumption and human comfort. Such characteristics can establish optimal shapes crossing the different variables with timelines. VR-modeling and interactive control allow an spatial evaluation of environmentally efficient forms. That is showed through an exercise of housing in different locations of Chile. This merger between digital media and ecological concerns represents a crossing of contemporary cultural trends to motivate exploration of new geometries, supported on the potential of technology and on sustainable human development
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	9c96
authors	Szalapaj, Peter and Chang, David C.
year	1999
title	Computer Architectural Representation - Applying the VOIDs Framework to a Bridge Design Scheme
doi	https://doi.org/10.52842/conf.ecaade.1999.387
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 387-394
summary	A virtual environment presents sensory information and visual feedback to the user in order to give convincing illusion of an artificial world. In the architectural profession, the spatio-temporal metaphor in itself constitutes significant information retrieval, because we understand architecture by seeing it. This paper attempts to understand, and then to analyse the characteristics of representation of architectural models in virtual environments. We will examine the use and creativity of current computer generated architectural presentation in virtual environments. Our observations will be applied to the modelling of a bridge in Castlefield, Manchester, and evaluated by a group of students within the School of Architecture at Sheffield University. The conclusion of this paper will be the presentation of a conceptual structure for representing architectural models in virtual environments. This paper also explores the tension between the correspondence and constructivist views of representation. The correspondence view of representation relies on the idea that a representation corresponds to what is out there in the world. The constructivist view of representation advocates that any actual interpretation would depend on the context of their social and cultural backgrounds. However, the authors believe there should be a combination of these two views for architectural representation in virtual environments, and a framework developed by the authors - VOIDs will be presented.
keywords	Virtual Environment, Architectural Representation, VOIDs, Correspondence, Constructivist
series	eCAADe
email
last changed	2022/06/07 07:56

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6d88
authors	Achten, Henri H. and Van Leeuwen, Jos P.
year	1999
title	Feature-Based High Level Design Tools - A Classification
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 275-290
summary	The VR-DIS project aims to provide design support in the early design stage using a Virtual Reality environment. The initial brief of the design system is based on an analysis of a design case. The paper describes the process of analysis and extraction of design knowledge and design concepts in terms of Features. It is demonstrated how the analysis has lead to a classification of design concepts. This classification forms one of the main specifications for the VR-based design aid system that is being developed in the VR-DIS programme. The paper concludes by discussing the particular approach used in the case analysis and discusses future work in the VR-DIS research programme.
keywords	Features, Feature-Based modelling, Architectural Design, Design Process, Design Support
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	ga9925
id	ga9925
authors	Ambrosini, L., Longatti, M. and Miyajima, H.
year	1999
title	Time sections, abstract machines
source	International Conference on Generative Art
summary	conditions a time-spatial discontinuity in the urban grid, ancient walls casually discovered in a substrate of the contemporary town needs a surplus of information to be understood and interfaced with their current condition. diagrams diverse chronological stages of the urban evolution are mapped on the area, in order to read the historical stratifications as a multiplicity of signs; this abstract approach leads to consider the roman space as guided by metrics, a system of measure superimposed on the landscape, vs. medioeval spatial continuity, where more fluid relations between the same urban elements create a completely different pattern.assemblage (time sections) a surface, automatically displaced from the medioeval diagram, moves along the z axis, the historical stratification direction, intersecting in various, unpredictable, manners a series of paths; these paths start as parallels, allowing an undifferentiated access to the area, and mutate along their developing direction, intertweening and blending each other; linear openings are cut on the surface, virtually connecting the two levels by light, following the roman grid in rhythm and measure. Projected on the lateral wall, the cadence of the vertical and horizontal elements becomes a temporal diagram of the design process.movement time takes part into the process through two kinds of movement: the first one, freezed when reaches the best results, in terms of complexity, is given by the surface intersecting the tubular paths; the second one is represented by multiple routes walking on which the project can be experienced (in absence of any objective, fixed, point of view, movement becomes the only way to understand relations). Thresholds between typical architectural categories (such as inside-outside, object-landscape etc.) are blurred in favour of a more supple condition, another kind of continuity (re)appears, as a new media, between the different historical layers of the city.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	edf5
authors	Arnold, J.A., Teicholz, P. and Kunz, J.
year	1999
title	An approach for the interoperation of web-distributed applications with a design model
source	Automation in Construction 8 (3) (1999) pp. 291-303
summary	This paper defines the data and inference requirements for the integration of analysis applications with a product model described by a CAD/CAE application. Application input conditions often require sets of complex data that may be considered views of a product model database. We introduce a method that is compatible with the STEP and PLIB product description standards to define an intermediate model that selects, extracts, and validates views of information from a product model to serve as input for an engineering CAD/CAE application. The intermediate model framework was built and tested in a software prototype, the Internet Broker for Engineering Services (IBES). The first research case for IBES integrates applications that specify certain components, for example pumps and valves, with a CAD/CAE application. This paper therefore explores a sub-set of the general problem of integrating product data semantics between various engineering applications. The IBES integration method provides support for a general set of services that effectively assist interpretation and validate information from a product model for an engineering purpose. Such methods can enable application interoperation for the automation of typical engineering tasks, such as component specification and procurement.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: