Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	7083
authors	Johnson, Brian and Kolarevic, Branko
year	1999
title	EVAL: A Web-based Design Review System
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 30-39
doi	https://doi.org/10.52842/conf.acadia.1999.030
summary	The Association for Computer Aided Design in Architecture (ACADIA) recently conducted a design competition in which design projects were presented using web sites. As a consequence it was not necessary to co-locate reviewers in order to view submissions. Since the proposals took the form of web sites, it seemed appropriate to use the web as the medium for conducting the review. The review thus became an opportunity to explore online design studio review strategies as well as competition issues. As there were over 600 entries in the competition, each of which was to be reviewed by at least three reviewers, the review process presented certain logistical challenges that might not pertain to a "normal" design studio. Using a globally-distributed review panel and jury meant that synchronous review of projects would not be possible, and that face-to-face interaction between jurors would be lost. This paper describes the review system which was developed to address this need. It also profiles the conduct of the review itself, and offers some observations about performance, ergonomics and related design issues for future efforts.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	9aaf
authors	Burrow, Andrew and Woodbury, Robert
year	1999
title	Pi-Resolution in Design Space Exploration
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 291-308
summary	In studying the phenomenon of design we use models to envision mechanisms by which computers might support design. In one such model we understand design as guided movement through a space of possibilities. Design space explorers embody this model as mixed-initiative environments in which designers engage in exploration via human computer interaction. Constraint resolution provides a formal framework for interaction in design space explorers. Rather than directly providing solutions to design problems, constraint resolution provides a mechanism for organizing construction. Therefore, we are less interested in the set of solutions to a constraint problem than the process by which intermediate steps are generated. Pi-resolution is one such mechanism applicable to design space explorers. It describes the solution, by recursive enumeration, of feature structure type constraints. During pi-resolution, satisfiers are constructed by the application of type constraints drawn from an inheritance hierarchy. This constructive process provides a strong model for design space exploration. The constraint solver does not do the work of the designer, but rather design efforts are situated in, and organized by, constraint resolution. Therefore, the efficiency of the recursive enumeration in finding solutions is not an issue, since non-determinism in the search is resolved by the human user as design space exploration.
keywords	Design Space Explorers, Typed Feature Structures, Functional Decomposition, Mixed Initiative
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	4b48
authors	Dourish, P.
year	1999
title	Where the Footprints Lead: Tracking down other roles for social navigation
source	Social Navigation of Information Space, eds. A. Munro, K. H. and D Benyon. London: Springer-Verlag, pp 15-34
summary	Collaborative Filtering was proposed in the early 1990's as a means of managing access to large information spaces by capturing and exploiting aspects of the experiences of previous users of the same information. Social navigation is a more general form of this style of interaction, and with the widening scope of the Internet as an information provider, systems of this sort have rapidly moved from early research prototypes to deployed services in everyday use. On the other hand, to most of the HCI community, the term social navigation" is largely synonymous with "recommendation systems": systems that match your interests to those of others and, on that basis, provide recommendations about such things as music, books, articles and films that you might enjoy. The challenge for social navigation, as an area of research and development endeavour, is to move beyond this rather limited view of the role of social navigation; and to do this, we must try to take a broader view of both our remit and our opportunities. This chapter will revisit the original motivations, and chart something of the path that recent developments have taken. Based on reflections on the original concerns that motivated research into social navigation, it will explore some new avenues of research. In particular, it will focus on two. The first is social navigation within the framework of "awareness" provisions in collaborative systems generally; and the second is the relationship of social navigation systems to spatial models and the ideas of "space" and "place" in collaborative settings. By exploring these two ideas, two related goals can be achieved. The first is to draw attention to ways in which current research into social navigation can be made relevant to other areas of research endeavour; and the second is to re-motivate the idea of "social navigation" as a fundamental model for collaboration in information-seeking."
series	other
last changed	2003/04/23 15:50

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	9e26
authors	Do, Ellen Yi-Luen,
year	1999
title	The right tool at the right time : investigation of freehand drawing as an interface to knowledge based design tools
source	College of Architecture, Georgia Institute of Technology
summary	Designers use different symbols and configurations in their drawings to explore alternatives and to communicate with each other. For example, when thinking about spatial arrangements, they draw bubble diagrams; when thinking about natural lighting, they draw a sun symbol and light rays. Given the connection between drawings and thinking, one should be able infer design intentions from a drawing and ultimately use such inferences to program a computer to understand our drawings. This dissertation reports findings from empirical studies on drawings and explores the possibility of using the computer to automatically infer designer's concerns from the drawings a designer makes. This dissertation consists of three parts: 1) a literature review of design studies, cognitive studies of drawing and computational sketch systems, and a set of pilot projects; 2) empirical studies of diagramming design intentions and a design drawing experiment; and 3) the implementation of a prototype system called Right-Tool-Right-Time. The main goal is to find out what is in design drawings that a computer program should be able to recognize and support. Experiments were conducted to study the relation between drawing conventions and the design tasks with which they are associated. It was found from the experiments that designers use certain symbols and configurations when thinking about certain design concerns. When thinking about allocating objects or spaces with a required dimensions, designers wrote down numbers beside the drawing to reason xviii about size and to calculate dimensions. When thinking about visual analysis, designers drew sight lines from a view point on a floor plan. Based on the recognition that it is possible to associate symbols and spatial arrangements in a drawing with a designer's intention, or task context, the second goal is to find out whether a computer can be programed to recognize these drawing conventions. Given an inferred intention and context, a program should be able to activate appropriate design tools automatically. For example, concerns about visual analysis can activate a visual simulation program, and number calculations can activate a calculator. The Right- Tool-Right-Time prototype program demonstrates how a freehand sketching system that infers intentions would support the automatic activation of different design tools based on a designers' drawing acts.
series	thesis:PhD
email
more	http://www.arch.gatech.edu/~ellen/thesis.html
last changed	2004/10/04 07:49

_id	5377
authors	Frazer, J.H., Tang, M.X. and Jian, S.
year	1999
title	Towards a Generative System for Intelligent Design Support
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 285-294
doi	https://doi.org/10.52842/conf.caadria.1999.285
summary	In the development of intelligent computer aided design systems, three important issues need to considered. These issues are: how to support the generation of product concepts using evolutionary computation techniques; how to use intelligent databases and constraint management systems for detailed exploration of product embodiment; and how to integrate rapid prototyping facilities for product evaluation. In this paper, we present a brief review of knowledge based design and evolutionary design and discuss ways of integrating both in the development of a generative design system. Based on this review, we present the model and its applications of a generative design system utilizing a number of AI and evolutionary computation techniques. This generative design model is intended to provide a generic computational framework for the development of intelligent design support systems.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	be33
authors	Gero, John S.
year	1999
title	Constructive Memory in Design Thinking
source	Architectural Science Review 42: 3-5
summary	This paper introduces the concept of constructive memory as a framework for the modeling of design thinking. It describes some recent results from empirical studies of designing to show a gap exists between our models of designing and these results. The paper presents constructive memory and its associated concept of situatedness as potential foundations for increasing our understanding of design thinking.
keywords	Constructive Memory; Emergence; Situatedness; Models of Designing; Design Theory
series	journal paper
email
last changed	2003/03/31 08:34

_id	3940
authors	Hall, Rick
year	1999
title	Realtime 3D visual Analysis of Very Large Models at Low Cost
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 437-441
doi	https://doi.org/10.52842/conf.ecaade.1999.437
summary	Computer based visualisation of 3D models in architecture has been possible for 20 years or more, and the software technology has steadily improved during this time so that now incredibly realistic images can be generated from any viewpoint in a model, and impressive fly through sequences can bring a model to life in ways previously not possible. Virtual reality is with us and multi-media enables us to present a finished design in increasingly seductive ways. However, these forms of output from a 3D model offer much more limited benefits during the design process and particularly on large complex models because they are so computing intensive and it often require many hours to produce just one image. Anything other than a small and relatively simple model cannot be viewed dynamically in real-time on a desktop PC of the type commonly used by architects in a design office. Until now the solution to this problem has meant investing in expensive design review hardware and software with its inherent need for trained, skilled labour. As a result, design review products are often viewed as a luxury or costly necessity.
keywords	Visual Analysis, Low Cost, 3D Modelling
series	eCAADe
last changed	2022/06/07 07:50

_id	a70b
authors	Jung, Th., Do, E.Y.-L. and Gross, M.D.
year	1999
title	Immersive Redlining and Annotation of 3D Design Models on the Web
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 81-98
summary	The Web now enables people in different places to view three-dimensional models of buildings and places in a collaborative design discussion. Already design firms with offices around the world are exploiting this capability. In a typical application, design drawings and models are posted by one party for review by others, and a dialogue is carried out either synchronously using on line streamed video and audio, or asynchronously using email, chat room, and bulletin board software. However, most of these systems do not allow designers to embed annotations and proposed design changes in the threedimensional design model under discussion. We present a working prototype of a system that has these capabilities and describe the configuration of Web technologies we used to construct it.
keywords	VRML, Immersive Environment, Virtual Annotation, Computer-aided Design, Building Models
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	4ae8
authors	Kokosalakis, Jen, Hohmann, L.M. and Pamplin, I.
year	1999
title	Benefits of Data Integration in Building Modelling: 3D Object Oriented Professional Collaboration
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 103-130
summary	This paper will review current progress across the building construction industry in meeting demands for use of data integration with the 3D building model as the coordinating device in building design and development. Decades of national initiatives from NEDO (1990) to Egan (1998) have striven to encourage collaboration in first the building design team and later targetting in programmas the means to accomplish this. In its 14th year 'The User Group' has intensified efforts to persuade the industry of the benefits of associating all data involved from the first briefing and conception of design needs and ideas, through the development of the design, testing for structures, costs, heating, lighting, urban and rural environmental impact, facilities management, adaptation and even the eventual controlled demolition of the building. Examples in this paper will be reported from 'The User Group' conference, "Profit from Data Integration: An industry update", (NEC, Birmingham, Nov. 1998), to indicate how various organisations are now profiting from data integration in 3D object orientated modelling.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	caadria2005_b_4b_d
id	caadria2005_b_4b_d
authors	Martin Tamke
year	2005
title	Baking Light: Global Illumination in VR Environments as architectural design tool
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 214-228
doi	https://doi.org/10.52842/conf.caadria.2005.214
summary	As proven in the past, immersive Virtual Environments can be helpful in the process of architectural design (Achten et al. 1999). But still years later, these systems are not common in the architectural design process, neither in architectural education nor in professional work. The reasons might be the high price of e.g. CAVEs, the lack of intuitive navigation and design tools in those environments, the absence of useful and easy to handle design workflows, and the quality constraints of real-time display of 3D models. A great potential for VR in the architectural workflow is the review of design decisions: Display quality, comfortable navigation and realistic illumination are crucial ingredients here. Light is one of the principal elements in architectural design, so design reviews must enable the architect to judge the quality of his design in this respect. Realistic light simulations, e.g. via radiosity algorithms, are no longer the domain of high-end graphic workstations. Today's off-the-shelf hardware and 3D-software provide the architect with high-quality tools to simulate physically correct light distributions. But the quality and impression of light is hard to judge from looking at still renderings. In collaboration with the Institute of Computer Graphics at our university we have established a series of regular design reviews in their immersive virtual environment. This paper describes the workflow that has emerged from this collaboration, the tools that were developed and used, and our practical experiences with global-light-simulations. We share results which we think are helpful to others, and we highlight areas where further research is necessary.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	9eb6
authors	Peng C. and Blundell Jones, P.
year	1999
title	Hypermedia Authoring and Contextual Modeling in Architecture and Urban Design: Collaborative Reconstructing Historical Sheffield
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 114-124
doi	https://doi.org/10.52842/conf.acadia.1999.114
summary	Studies of historical architecture and urban contexts in preparation for contemporary design interventions are inherently rich in information, demanding versatile and efficient methods of documentation and retrieval. We report on a developing program to establish a hypermedia authoring approach to collaborative contextual modeling in architecture and urban design. The paper begins with a description of a large-scale urban history study project in which 95 students jointly built a physical model of the city center of Sheffield as it stood in 1900, at a scale of 1:500. Continuing work on the Sheffield urban study project, it appears to us desirable to adopt a digital approach to archiving the material and in making it both indexible and accessible via multiple routes. In our review of digital models of cities, some interesting yet unexplored issues were identified. Given the issues and tasks elicited, we investigated hypermedia authoring in HTML and VRML as a designer-centered modeling methodology. Conceptual clarity of the methodology was considered, intending that an individual or members of design groups with reasonable computing skills could learn to operate it quickly. The methodology shows that it is practicable to build a digital contextual databank by a group of architecture/urban designers rather than by specialized modeling teams. Contextual modeling with or without computers can be a research activity on its own. However, we intend to investigate further how hypermedia-based contextual models can be interrelated to design development and communication. We discuss three aspects that can be explored in a design education setting.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	2c63
authors	QaQish, Ra'Ed and Tarazi, Khaled
year	1999
title	Formulating a Computer-Aided Architectural Design (CAAD) Program Model in Distance Education (DE) at Open Universities (OU)
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 189-204
summary	This paper reports on a project that aims to formulate a CAAD program model in Distance Education (Learning/Teaching) framework, to be applied and implemented in future settings at Open Universities worldwide. The methodology used to establish the CAAD program model consisted of a worldwide literature review on the subject of Distance Education and Open Universities. It also involved an assessment of the methods and means used in the delivery of materials to students enrolled at Open Universities, together with an analysis of the current program of study and subject related courses. The methods of this investigation consisted of a comparative analysis between the existing models of teaching process at Open Universities and how it relates to CAAD in architecture schools. The study endeavored to examine several issues that were found to be key factors in any Open University system, namely: the methods of study, program of study, student type/body, academic/degree requirements, and residency/academic calendars. While attempting to establish a conceptual CAAD program model, this study investigated several questions concerning the efficiency of CAAD teaching in Distance Education. One of the study objectives was to determine which factors were mostly needed to effectively integrate CAAD in DE as a new program in Open Universities. In addition, how would these factors affect the design of CAAD courses in OU systems as a new DE program area? And what structural elements would be most affected by these factors? Another objective of this study was to determine to what extent the new CAAD program model in tandem with staff, learning environment, and administered materials would be effective in generating supplementary strategies in the virtual design studio. A third objective was to evaluate the personal computer station as an alternative design studio space in future settings of schools of architecture. Consequently, the principle objective of this study was to develop and establish a CAAD program model to be adopted by Open Universities as a new subject area in DE. Mainly, the study attempted to locate the areas where CAAD teaching excels in the context of virtual design studio of OU system.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	1a3d
authors	Willey, David
year	1999
title	Sketchpad to 2000: From Computer Systems to Digital Environments
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 526-532
doi	https://doi.org/10.52842/conf.ecaade.1999.526
summary	It can be argued that over the last thirty five years computer aided architectural design (CAAD) has made little impact in terms of aiding design. The paper provides a broadbrush review of the last 35 years of CAAD research and suggests that the SKETCHPAD notion that has dominated CAAD since 1963 is now a flawed concept. Then the discipline was replete with Modernist concepts of optimal solutions, objective design criteria and universal design standards. Now CAD needs to proceed on the basis of the Post Modern ways of thinking and designing opened up by digital techniques - the Internet, multimedia, virtual reality, electronic games, distance learning. Computers facilitate information flow and storage. In the late seventies and eighties the CAAD research community's response to the difficulties it had identified with the construction of integrated digital building models was to attempt to improve the intelligence of the computer systems to better match the understanding of designers. Now it is clear that the future could easily lie with CAAD systems that have almost no intelligence and make no attempt to aid the designer. Communication is much more central to designing than computing.
keywords	History, Intelligence, Interface, Sketchpad, Web
series	eCAADe
email
last changed	2022/06/07 07:56

_id	91fd
authors	Wu, Jie and Gu, Jingwen
year	1999
title	The Computer Media Method of Analysis of Architecture Works
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 97-103
doi	https://doi.org/10.52842/conf.caadria.1999.097
summary	The analysis of architecture works is through the design of architecture. It is closely related to the review of architecture and also is the most important method to research into and study architecture. But it hasnÌt been paid enough attention, because of the limitations of the traditional methods. Now with the development of the computer media technology and its wide use, there appears a new methodÛthe computer media analysis method, which has many advantages that the traditional methods havenÌt. In this paper, we discuss the frame, the process and the feature of the new method. And through the analysis of examples we explore the working of this method under the current condition. We hope through the research and the study of this new method, the analysis of architecture works can be used consciously by students, educators, and practitioners to think deeply about, research into, study architecture, and at the same time to creating better designs.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	cf4d
authors	Zamanian, M.K. and Pittman, J.H.
year	1999
title	A software industry perspective on AEC information models for distributed collaboration
source	Automation in Construction 8 (3) (1999) pp. 237-248
summary	This paper focuses on information modeling and computing technologies that are most relevant to the emerging software for the Architecture, Engineering, and Construction (AEC) industry. After a brief introduction to the AEC industry and its present state of computer-based information sharing and collaboration, a set of requirements for AEC information models are identified. Next, a number of key information modeling and standards initiatives for the AEC domain are briefly discussed followed by a review of the emerging object and Internet technologies. The paper will then present our perspective on the challenges and potential directions for using object-based information models in a new generation of AEC software systems intended to offer component-based open architecture for distributed collaboration.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

For more results click below: