Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ga0015
id	ga0015
authors	Daru, R., Vreedenburgh, E. and Scha, R.
year	2000
title	Architectural Innovation as an evolutionary process
source	International Conference on Generative Art
summary	Traditionally in art and architectural history, innovation is treated as a history of ideas of individuals (pioneers), movements and schools. The monograph is in that context one of the most used forms of scientific exercise. History of architecture is then mostly seen as a succession of dominant architectural paradigms imposed by great architectural creators fighting at the beginning against mainstream establishment until they themselves come to be recognised. However, there have been attempts to place architectural innovation and creativity in an evolutionary perspective. Charles Jencks for example, has described the evolution of architectural and art movements according to a diagram inspired by ecological models. Philip Steadman, in his book "The Evolution of Designs. Biological analogy in architecture and the applied arts" (1979), sketches the history of various biological analogies and their impact on architectural theory: the organic, classificatory, anatomical, ecological and Darwinian or evolutionary analogies. This last analogy "explains the design of useful objects and buildings, particularly in primitive society and in the craft tradition, in terms of a sequence of repeated copyings (corresponding to inheritance), with small changes made at each stage ('variations'), which are then subjected to a testing process when the object is put into use ('selection')." However, Steadman has confined his study to a literature survey as the basis of a history of ideas. Since this pioneering work, new developments like Dawkins' concept of memes allow further steps in the field of cultural evolution of architectural innovation. The application of the concept of memes to architectural design has been put forward in a preceding "Generative Art" conference (Daru, 1999), showing its application in a pilot study on the analysis of projects of and by architectural students. This first empirical study is now followed by a study of 'real life' architectural practice. The case taken has a double implication for the evolutionary analogy. It takes a specific architectural innovative concept as a 'meme' and develops the analysis of the trajectory of this meme in the individual context of the designer and at large. At the same time, the architect involved (Eric Vreedenburgh, Archipel Ontwerpers) is knowledgeable about the theory of memetic evolution and is applying a computer tool (called 'Artificial') together with Remko Scha, the authoring computer scientist of the program who collaborates frequently with artists and architects. This case study (the penthouse in Dutch town planning and the application of 'Artificial') shall be discussed in the paper as presented. The theoretical and methodological problems of various models of diffusion of memes shall be discussed and a preliminary model shall be presented as a framework to account for not only Darwinian but also Lamarckian processes, and for individual as well as collective transmission, consumption and creative transformation of memes.
keywords	evolutionary design, architectural innovation, memetic diffusion, CAAD, penthouses, Dutch design, creativity, Darwinian and Lamarckian processes
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	9b63
authors	De Mesa, A., Quilez, J. and Regot, J.
year	1999
title	Sunlight Energy Graphic and Analytic Control in 3D Modelling
doi	https://doi.org/10.52842/conf.ecaade.1999.733
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 733-738
summary	Linking solar positions with architecture is a traditional idea, but the use of graphical tools to control sunlight in urban surroundings or buildings is relatively recent. A three-dimensional working environment like the computer offers a new dimension to verify the relationships between the sun and the architecture. This paper shows a new way to calculate the incidence of solar energy in architectural environments using computer 3D modelling. The addition of virtual space visualisation to the analytic computation brings a new tool that simplifies the technical study of sunlight. We have developed several programs based upon the three-dimensional construction of the solar vault and the obstructing objects for a defined position. The first one draws the solar vault for a defined range of dates according to latitude, that is the basis of the energetic calculation. The second program computes the obstruction, i.e. the solar regions that are obstructed by any object. Finally, the third one, allow us to define an orientation to compute the energy that arrives to the analysed positioning. The last program returns the result of calculation in several ways: it shows the amount of energy through colours and makes a list of solar hours according to its energy.
keywords	Sunlight, Energy, 3D modelling
series	eCAADe
last changed	2022/06/07 07:56

_id	d931
authors	Gabryszewski, Artur B.
year	1999
title	Idea of an Intelligent Building - Development Prospects
doi	https://doi.org/10.52842/conf.ecaade.1999.739
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 739-743
summary	An ever-increasing number of offices as also residential buildings are being realised by designers and investors in accordance with the concept of an intelligent building. Houses of the new generation are being constructed. This is possible thanks to dynamic progress in the development of computer and microprocessor engineering techniques. Putting into reality the idea of the 'intelligent building' will become one of the most interesting assignments of Polish building industry in the rapidly approaching XXI century. The term 'intelligent building' first appeared in the eighties. The idea behind this conception is aspiring to create a friendly, work supporting, effective environment. The revolution in telecommunications and information technology along with change in the standards of office work, have caused computer networks and modem systems of automation and protection, to invade buildings. From the technical point of view, an intelligent building is an object in which all the subsystems co-operate with each other, forming a friendly environment for man. For users of an intelligent building, the most important issue is realisation of the following aims: object management which includes both control of human resources and automation systems in the building and also efficient management of the building space in such a way that the costs of its utilisation are minimised. The possibility of optional installation of modern systems and equipment should be facilitated by the architecture itself. Therefore, the specifics of all the building elements should be taken into account right at the designing stage. The following features characterise an intelligent building: integration of telecommunication systems in the building, central management and supervision system and utilisation of structural cabling as the carrier of signals controlling most of the systems in the building. Presently, there is no building in Poland that could be characterised by the three features mentioned.
keywords	High-tech Architecture, Ecology, CAAD
series	eCAADe
email
last changed	2022/06/07 07:50

_id	5ed1
authors	Gero, J.S. and Fujii, H.
year	1999
title	A computational framework for concept formation for a situated design agent
source	K. Hori and L. Candy (Eds.), Proceedings Second International Workshop on Strategic Knowledge and Concept Formation, Iwate Prefectural University, Iwate, Japan, pp. 59-71
summary	This paper takes the approach that designing is situated and that concepts are formed as a consequence od the this situatedness of designing. The papers presents a framework for concept formation that draws on a structure of a a design agent that includes sensors, perceptors and conceptors that interact with each other and the external and internal environment of the agent to produce the situation that is a contingent basis for the formation and use of concepts.
keywords	Concept Formation, Situatedness
series	other
email
last changed	2003/04/06 09:10

_id	722c
authors	Gero, John S.
year	1999
title	A Model of Designing that Includes its Situatedness
doi	https://doi.org/10.52842/conf.caadria.1999.235
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 235-241
summary	Current models of designing are inadequate as a basis for the development of CAAD tools for use at the conceptual stages of designing. Such models appear to be only satisfactory for the detail stages of designing. Further, current models of designing are not in accord with our present knowledge of designing. This gap has created difficulties in the development of suitable computational support tools for designers. The development of the model proposed in this paper aims to begin to fill that gap and hence provide a foundation for a new generation of computer-based design support tools, potentially applicable at the conceptual stage of designing.
series	CAADRIA
email
more	http://www.arch.usyd.edu.au/~john/kcdc
last changed	2022/06/07 07:51

_id	sigradi2005_799
id	sigradi2005_799
authors	Gonzalo, Guillermo E.; Sara L. Ledesma, V.M. Nota, C.F. Martínez, G.I. Quiñones y G. Márquez Vega.
year	2005
title	Methodology for the bioclimatic design: computer sustain for election of guidelines and strategies.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 799-805
summary	After numerous studies and practical of use, field and laboratory measurements, carried out among the years 1994 and 1999, we arrived to the elaboration and presentation of a methodology for the bioclimatic design and energetically sustainable that already takes two books publications. With the support of more than 600 figures that facilitate the understanding of the concepts explained in the books and 26 computer software and databases, that are attached to the second book, the work is facilitated so that designers of buildings that have not been never in contact with a certain climate, or that they don’t have sufficiently assumed by means of the observation of the particularities of a certain climatic situation, to understand the form in that the climate influence their design, condition or determine the design solutions and averge strategies that will choose when carrying out an architecture work. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	f371
authors	Hadjisophocleous, G.V. and Benichou, N.
year	1999
title	Performance criteria used in fire safety design
source	Automation in Construction 8 (4) (1999) pp. 489-501
summary	In many countries around the world, building codes are shifting from prescriptive- to performance-based for technical, economic, and social reasons. This move is made possible by progress in fire safety technologies, including the development of engineering tools that are required to implement performance codes. The development of performance-based codes follows a transparent, hierarchical structure in which there are usually three levels of objectives. The top level objectives usually state the functional requirements and the lowest level the performance criteria. Usually, one middle level exists, however, more levels can be used in this hierarchical structure depending on the complexity of the requirements. The success of performance-based codes depends on the ability to establish performance criteria that will be verifiable and enforceable. The performance criteria should be such that designers can easily demonstrate, using engineering tools, that their designs meet them and that the code authority can enforce them. This paper presents the performance criteria that are currently used by fire protection engineers in designing fire safety systems in buildings. These include deterministic and probabilistic design criteria as well as safety factors. The deterministic criteria relate mainly to life safety levels, fire growth and spread levels, fire exposure and structural performance. The probabilistic criteria focus on the incident severity and incident likelihood. Finally, the inclusion of safety factors permits a conservative design and allows for a smaller margin of error due to uncertainty in the models and the input data.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	9088
authors	Hartkopf, V. and Loftness, V.
year	1999
title	Global relevance of total building performance
source	Automation in Construction 8 (4) (1999) pp. 377-393
summary	Global population and environmental trends demand a radical departure from current building and developmental processes. Applying total building performance thinking can reduce energy consumption, pollution and waste in existing and new construction by a factor of 4 and simultaneously can improve quality of life within buildings––measured through occupant satisfaction, health and productivity. The further development of advanced energy and water systems, and the application of appropriate technology and systems integration concepts will help to enable the elimination of `waste-streams', avoiding obsolescence, as well as managing industrial and agricultural nutrient streams. Instead of treating buildings and their contents as `pre-garbage', worse `pre toxic-waste', all material flows can be considered within life cycles for `cradle to cradle' use. These concepts can make major contributions towards the creation of more sustainable lifestyles with even greater quality in the industrialized countries and the development and implementation of sustainable urban and building infrastructures in rapidly emerging economies. Rather than the continued export of non-sustainable building solutions, this paper argues for the development and demonstration of such practices in the industrialized countries that would create a progressive 'pull' to enable the appropriate implementation of new practices.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	bsct_islami
id	bsct_islami
authors	Islami, Agron
year	2007
title	A Systematic Approach to Thermal Adaptation of Detached Single Family Buildings in Kosovo
source	Vienna University of Technology; Building Science & Technology
summary	The research focuses on thermal behaviour of non-insulated single detached family units in the region of Kosovo. The region has experienced a massive construction of illegal housing especially after the conflict of 1999. Such construction resulted in poor thermal behaviour of the houses due to the lack of insulation. The poor thermal behaviour resulted in degradation of thermal comfort for the inhabitants of the houses. This phenomenon occurs due to energy savings to heat the house or more accurately, a specific part of the house. The simulation is based on parametric studies in an hourly basis to compute the thermal behavior of three specific houses. The first simulation is performed on a non-insulated house whereas the other simulations are performed with improved thermal insulation in order to understand the importance of a thermal envelope and its impact in this type of houses. The generated results emphasize the energy savings if thermal envelope is improved in existing houses. Simulation program “TAS” was used to extract figures and numbers related to the cases.The research aims to inform the local population on possibilities for increasing the thermal performances of their houses by improvement of the thermal envelope. It raises the quality of living in their dwellings as well as the quality of the environment, subject to a considerable degradation caused by pollution, generated by the outworn power thermal power plants in Kosovo.
keywords	Building performance, Non-insulated house, Thermal comfort, Heating, Parametric calculations
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	4fa1
authors	Lee, E., Ida, Y., Woo, S. and Sasada, T.
year	1999
title	Environmental Design Using Fractals in Computer Graphics
doi	https://doi.org/10.52842/conf.ecaade.1999.533
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 533-538
summary	Computer graphics have developed efficient techniques for visualisation of the real world. Many of the algorithms have a physical basis, such as computational models for the light and the shadow, models of real objects (buildings, mountains, roads and so on) and the simulation of natural phenomenon. Now computer graphics techniques provide the virtual world with a perception of three dimensions. The concept of the virtual world and its technology have been expanding and intensifying in recent years. Almost everything in the real world has been simulated in virtual world. When it comes to a terrain model, what we need is labour and time. But now it is possible to simulate terrain like the real world using fractals in computer graphics with a very small program and small data set. This study aims to show how to build a real world impression in the virtual world. In this paper the authors suggest a landscape design method and show the results of its application.
keywords	Fractals, Polygon-Reduction, Computer Graphics, Virtual World, Collaboration
series	eCAADe
last changed	2022/06/07 07:51

_id	221d
authors	Lee, Sanghyun
year	1999
title	Internet-based collaborative design evaluation : an architect's perspective
source	Harvard University
summary	This research aims at developing a design evaluation system that employs a Product Model as the logical basis for integrating building design and construction processes. The system is implemented with Java language, which allows the system to work over the Internet. Accordingly, the system helps architects to collaborate with remote participants. Thus, this design evaluation system is a building performance evaluator like DOE-2, RADIANCE, HVAC, and the Automated Building Code Checker. This research, however, is mainly concerned with an architect's view during the schematic design and design development stage, while the existing design evaluation systems cover other special consultants' views such as those of HVAC designers, structural engineers, and contractors. From an architect's view, this evaluation system checks the compliance of design objects represented by means of physical objects such as walls and windows and conceptual objects such as rooms as well, to the design criteria focused on accommodating human behavior, rather than other building performances such as sustaining building structures and maintaining indoor livability. As such, the system helps designers analyze and evaluate design solutions according to their original intent. The innovative points of this research lie in the following: (1) Unlike other inquiries, it addresses a systematic evaluation of building design from an architect's view focusing on the experiential quality of the built environment. This research demonstrates that such an evaluation becomes available by introducing human activity-based evaluation. (2) It can take a multi-agenda for several groups of different interests by providing an Aspect Model based on human activity-centered systematic translation of their design considerations and 3D model-based graphical representations into system readable ones. (3) As a result, it addresses the possibility of expanding the capability of the design evaluator from a mere code checker to a general design evaluator while simultaneously, enhancing the availability from stand alone to Internet based networking.
keywords	Architectural Rendering; Data Processing; Evaluation; Buildings; Performance; World Wide Web; Internet
series	thesis:PhD
last changed	2003/02/12 22:37

_id	9c3e
authors	Maher, M.L., Skow, B. and Cicognani, A.
year	1999
title	Designing the virtual campus
source	Design Studies, 20, 319-342
summary	Virtual Worlds are networked environments that look like the physical world, and create a sense of place for the person communicating, navigating, and doing things in the virtual world. Virtual worlds have traditionally been developed as games, in fact, most virtual worlds today are games. A virtual campus has been developed in the Architecture Faculty at the University of Sydney that is based on some of the concepts of virtual worlds. The virtual campus is a place on the internet where students can go to take courses, meet with academic staff, and communicate with other students. The development of the virtual campus has been influenced by research in design science and is based on the conceptual metaphor of architectural design. The design of the virtual campus is considered at three levels: the implementation level, the representation level, and the interface level. Identifying these levels provides a basis for the design of virtual worlds for professional and educational environments. The consideration of the representation level results in a consistent use of a conceptual metaphor so that a person in the virtual campus can make use of the facilities in an intuitive manner.
series	journal paper
email
last changed	2003/04/23 15:50

_id	2a47
authors	Mortola, E., Giangrande, A., Mirabelli, P. and Fortuzzi, A.
year	1999
title	Interactive Didactic Modules for On-Line Learning via Internet
doi	https://doi.org/10.52842/conf.ecaade.1999.273
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 273-278
summary	On-line learning can become a very efficient method of teaching in the University of the future. The Students can plan their curricula by selecting the offers of some universities coordinated that meet their specific aims. The communication interchange between student and teacher can be enriched through new forms of interaction via network technology. Laboratories of interactive design, which involve the participation of citizens, can become a good occasion to learn designing linked to the human needs. The architect who is interested in the sustainable development has to consider local needs and interact with users to build a new environment full of local values.
keywords	On-Line Learning, Internet, Teaching Modules, Participation, Collaborative Design, Neighbourhood Municipal Laboratories
series	eCAADe
email
more	http://rmac.arch.uniroma3.it
last changed	2022/06/07 07:58

_id	a875
authors	Suwa, M., Gero, J.S. and Purcell, T.
year	1999
title	How an Architect Created Design Requirements
source	G. Goldschmidt and W. Porter (eds), Design Thinking Research Symposium: Design Representation, MIT, Cambridge, pp. II.101-124
summary	There is an anecdotal view that designers, during a conceptual design process, not just synthesise solutions that satisfy initially given requirements, but also create by themselves novel design requirements that capture important aspects of the given problem. Further, it is believed that design sketches serve as a thinking tool for designers to do this. Then, what kinds of cognitive interaction with their own sketches enable designers to create novel requirements? The purpose of this paper is to answer this question. We examined the cognitive processes of a practising architect, using a protocol analysis technique. Our examinations focused on whether particular types of cognitive actions account for the creation of novel design requirements. We found that intensive occurrences of a certain type of perceptual actions, acts of establishing new relations or visual features on the sketches, are likely to co-occur with the creation of requirements. This suggests that this type of perceptual actions are the key constituent of acts of creating novel requirements, and therefore one of the important actions in sketching activities. This presents evidence of the view that designing is a situated act, as well as has an implication for design education.
keywords	Design Requirements; Sketches; Design Cognition; Protocol Analysis
series	journal paper
email
last changed	2003/03/31 08:37

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	4d95
authors	Alvarado, Rodrigo Garcia and Maver, Tom
year	1999
title	Virtual Reality in Architectural Education: Defining Possibilities
doi	https://doi.org/10.52842/conf.acadia.1999.007
source	ACADIA Quarterly, vol. 18, no. 4, pp. 7-9
summary	Introduction: virtual reality in architecture Virtual Reality (VR) is an emergent computer technology for full 3D-simulations, which has a natural application in the architectural work, due that activity involves the complete definition of buildings prior to its construction. Although the profession has a long tradition and expertise in the use of 2D-plans for the design of buildings, the increasing complexity of projects and social participation requires better media of representation. However, the technological promise of Virtual Reality involves many sophisticated software and hardware developments. It is based on techniques of 3D-modelling currently incorporated in the majority of drawing software used in architecture, and also there are several tools for rendering, animation and panoramic views, which provide visual realism. But other capabilities like interactivity and sense of immersion are still complex, expensive and under research. These require stereoscopic helmets, 3D pointers and trackers with complicated configurations and uncomfortable use. Most advanced installations of Virtual-Reality like CAVEs involve much hardware, building space and restrictions for users. Nevertheless, diverse developers are working in Virtual-Reality user-friendly techniques and there are many initial experiences of architectural walk-throughs showing advantages in the communication and development of designs. Then we may expect an increasing use of Virtual Reality in architecture.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	2fe1
authors	Arroyo, Julio and Chiarella, Mauro
year	1999
title	Infographic: Its Incorporation and Relativity in Architectural Design Process
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 313-318
summary	This paper is about an architectural design workshop regularly held at a public university in Santa Fe, Argentina. The class is about 150 students large, with different informatic capabilities and hardware facilities. The design problem of the workshop, which is one year long, is the relationship between architectural project and the construction of the urbanity. This implies both a physical intervention and a cultural expression. Pedagogy seeks students to overcome individualism, characteristic that is hardly induced by PCs, making a socialized design experience. A complementary and simultaneous use of graphic and infographic data is one of the main criteria of the workshop. The idea is to look for students to reach a wide vision by means of the use of different representation systems and means of information. Digital graphic is introduced early in the design process as an electronic model of urban context. It is considered as a one among many other graphic resources and is used together with ordinary models, geometric drawings, aerial and regular photography and hand made sketches. This paper relates the results that have been obtained when students were asked to make an analytic and sensitive approach to the relationship site - urban situation. This relationship has a great importance for the workshop since its goal is to make students to understand the the value of designing in and for the city.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	1071
authors	Asanowicz, Aleksander
year	1999
title	Evolution of Computer Aided Design: Three Generations of CAD
doi	https://doi.org/10.52842/conf.ecaade.1999.094
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 94-100
summary	This paper describes the three generations of CAD systems. The first generation of (primarily analytical) computer programmes really aided designing. These programmes were the tools for finding a functional solution in different areas of designing, from flat plans to the space organisation of a hospital. One of the shortcomings of these programmes was the lack of graphic interface. With time, however, this kind of interface was developed. As a result of this second generation of CAD systems the computer was transformed into a drafting machine and CAD meant Computer Aided Drafting. The main thesis of this consideration is that only now we have the chance to return to the idea of Computer Aided Design. One of the examples of these trends is the AVOCAAD programme in which Added Value of CAAD is analysed. The development of the third generation of CAD systems will be possible in the near future. Aiding the process of designing will demand the elaboration of new methods of using the computer at the early stages of this process. The computer should be used not for generating variants of functional solutions only but for also for the creation of 3D forms by 3D sketching. For this, the computer should be transformed from a tool into a medium; only then will designing become true Designing in Cyber Space.
keywords	Generations of CAAD, Design Process, Creation, Medium
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: