Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 631

Reformat results as: short short into frame detailed detailed into frame

_id	da88
authors	Chang, Teng-Wen
year	1999
title	Geometric typed feature structures : toward design space exploration
source	University of Adelaide, School of Architecture
summary	Demonstrates the significance and usefulness of representation in geometry by generating various floor design layouts for a typical Australian house, a single fronted cottage and the building enclosures
keywords	Domestic Australia Designs and Plans; Mathematics; Combinatorial Designs and Configurations
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	53a4
authors	Vélez Jahn, Gonzalo
year	1999
title	The MUMOVIAR (Museum for Modeling Virtual Architecture) - A Proposal for a Research Theme (The Mumoviar (For Museum Virtual Modeling Architecture) - to for Proposal to Research Theme)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 379-383
summary	One of the most interesting areas in the forefront of non-immersive virtual reality (VRML) applications to architecture is the one that concerns the design, construction and exploration of on-line multi-access worlds using the Internet-WWW. However, and despite the great proliferation of earlier single-access models built on VRML, attempts to collect, classify and provide accesibility that type of models has proved almost nil. On the other side, one of the architectural typologies that promises the greatest transformation potential in the virtual architecture area in cyberspace is the one that concerns virtual museums and galleries. This paper seeks to provide a bridge between the two aforementioned approaches by formulating a conceptual basis for the creation of a virtual, on-line, multi-access museum intended to house collections of VRML building models. Such models, initially shown at a conventional model scale, would be accessed by visitors through an interface intended to transport those visitors into the models’ environments, where changes in scale could provide navigation access to interior and exterior view of the building . Accordingly, the museum would act as a sort of "spaceport” toward different routes of exploration. This modelistic cascading seems to offer interesting possibilities as regards future virtual architecture applications.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	93a8
authors	Anders, P.
year	1999
title	Envisioning Cyberspace: Designing 3D Electronic Spaces
source	McGraw-Hill, NY
summary	Free of the constraints of physical form and limited only by imagination, new environments spring to life daily in a fantastic realm called cyberspace. The creators of this new virtual world may be programmers, designers, architects, even children. In this invigorating exploration of the juncture between cyberspace and the physical world, architect Peter Anders brings together leading-edge cyberspace art and architecture ... inspiring new techniques and technologies ... unexpected unions of reality and virtuality ... and visions of challenges and opportunities as yet unexplored. More than an invitation to tour fantastic realms and examine powerful tools, this book is a hard-eyed look at cyberspace's impact on physical, cultural, and social reality, and the human-centered principles of its design. This is a book that will set designers and architects thinkingNand a work of importance to anyone fascinated with the fast-closing space between the real and the virtual.
series	other
email
last changed	2003/04/23 15:14

_id	b73a
authors	Angelo,C.V., Bins Ely, V.H.M., Bueno,A.P., Ludvig C. and Trezub, D.
year	1999
title	Space Syntax and the New Transportation System in the Santa Catarina Island
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 434-437
summary	The paper reports an on-going research that aims at describing and analysing some of the syntactic characteristics of the urban space of Santa Catarina Island, in an attempt to evaluate its performance, more specifically its social and spatial integration and segregation. The research has been conducted with the aid of the Aximagic software, still in exam stage and not yet released to the public, a tool being developed by a group of researches of the Rio Grande do Sul Federal University and given up by Prof. Doctor Benamy Turkienicz. The software is part of a larger georeferenced program called CityZoom wich includes others tools to the comprehention of the urban morphology. This program works with graphic pictures in the inlet of data and also in the acquisition of results. The syntactic study of the Santa Catarina Island as a whole aims to obtain the comprehension of its global structure, relating it to the integrated public transportation system proposed to Florianópolis. These studies should allow an understanding of the impact the developments will have upon the urban morphology, and the new public transportation system.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ga9922
id	ga9922
authors	Annunziato, M. and Pierucci, P.
year	1999
title	The Art of Emergence
source	International Conference on Generative Art
summary	Since several years, the term emergence is mentioned in the paradigm of chaos and complexity. Following this approach, complex system constituted by multitude of individual develop global behavioral properties on the base of local chaotic interactions (self-organization). These theories, developed in scientific and philosophical milieus are rapidly spreading as a "way of thinking" in the several fields of cognitive activities. According to this "way of thinking" it is possible revise some fundamental themes as the economic systems, the cultural systems, the scientific paths, the communication nets under a new approach where nothing is pre-determined, but the global evolution is determined by specific mechanisms of interaction and fundamental events (bifurcation). With a jump in scale of the life, also other basic concepts related to the individuals as intelligence, consciousness, psyche can be revised as self-organizing phenomena. Such a conceptual fertility has been the base for the revision of the artistic activities as flexible instruments for the investigation of imaginary worlds, metaphor of related real worlds. In this sense we claim to the artist a role of "researcher". Through the free exploration of new concepts, he can evoke qualities, configurations and hypothesis which have an esthetical and expressive value and in the most significant cases, they can induce nucleation of cultural and scientific bifurcation. Our vision of the art-science relation is of cooperative type instead of the conflict of the past decades. In this paper we describe some of the most significant realized artworks in order to make explicit the concepts and basic themes. One of the fundamental topics is the way to generate and think to the artwork. Our characterization is to see the artwork not as a static finished product, but as an instance or a dynamic sequence of instances of a creative process which continuously evolves. In this sense, the attention is focused on the "generative idea" which constitutes the envelop of the artworks generable by the process. In this approach the role of technology (computers, synthesizers) is fundamental to create the dimension of the generative environment. Another characterizing aspect of our artworks is derived by the previous approach and specifically related to the interactive installations. The classical relation between artist, artwork and observers is viewed as an unidirectional flux of messages from the artist to the observer through the artwork. In our approach artist, artwork and observer are autonomous entities provided with own personality which jointly intervene to determine the creative paths. The artist which generate the environment in not longer the "owner" of the artwork; simply he dialectically bring the generative environment (provided by a certain degree of autonomy) towards cultural and creative "void" spaces (not still discovered). The observers start from these platforms to generate other creative paths, sometimes absolutely unexpected , developing their new dialectical relations with the artwork itself. The results derived by these positions characterize the expressive elements of the artworks (images, sequences and sounds) as the outcomes of emergent behavior or dynamics both in the sense of esthetical shapes emergent from fertile generative environments, either in terms of emergent relations between artist, artwork and observer, either in terms of concepts which emerge by the metaphor of artificial worlds to produce imaginary hypothesis for the real worlds.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	2c4a
authors	Aroztegui, Carmen
year	1999
title	The Architect's Use of the Internet - Study of the Architectural Presentation Possibilities
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 363-368
summary	The Internet media is opening new horizons in communication and representation in architecture. However, its use today is superficial, limited, and without creativity. This study will explore theories, methods and examples of how the virtual space of the Internet can be used in its full potential. That means to present ways of observing, understanding, interacting, and communicating the space without precedents in architecture. The existent presentations made by architects in the Internet are in general poor and static. Through the comparative analysis of two presentations of the same architectural space in the Internet and the use of state of the art technology in the Internet, this study will show innovations that will make the exploration of the architectural space more attractive, dynamic and interactive. The main issues will be on one hand, the improvement in the communication of the design through the use of the Internet, and on the other hand, the rise of the standards in the quality of the architectural presentations. This work will project possible implications of the Internet in architecture.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	9aaf
authors	Burrow, Andrew and Woodbury, Robert
year	1999
title	Pi-Resolution in Design Space Exploration
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 291-308
summary	In studying the phenomenon of design we use models to envision mechanisms by which computers might support design. In one such model we understand design as guided movement through a space of possibilities. Design space explorers embody this model as mixed-initiative environments in which designers engage in exploration via human computer interaction. Constraint resolution provides a formal framework for interaction in design space explorers. Rather than directly providing solutions to design problems, constraint resolution provides a mechanism for organizing construction. Therefore, we are less interested in the set of solutions to a constraint problem than the process by which intermediate steps are generated. Pi-resolution is one such mechanism applicable to design space explorers. It describes the solution, by recursive enumeration, of feature structure type constraints. During pi-resolution, satisfiers are constructed by the application of type constraints drawn from an inheritance hierarchy. This constructive process provides a strong model for design space exploration. The constraint solver does not do the work of the designer, but rather design efforts are situated in, and organized by, constraint resolution. Therefore, the efficiency of the recursive enumeration in finding solutions is not an issue, since non-determinism in the search is resolved by the human user as design space exploration.
keywords	Design Space Explorers, Typed Feature Structures, Functional Decomposition, Mixed Initiative
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ga0020
id	ga0020
authors	Codignola, G.Matteo
year	2000
title	[Title missing]
source	International Conference on Generative Art
summary	This paper is a summary of my last degree in architecture (discussed in December 1999) with Prof. Celestino Soddu and Prof. Enrica Colabella. In this work I had the possibility to reach complexity by a generative approach with the construction of a paradigm that organizes the different codes of project identity. My general objective was to design shape complexity in variable categories : 3d space surfaces, 2d drawings and 2d textures. I was to discover the identity of one of my favourite architects of the 20th century : Antoni Gaudì, by constructing codes relative to shape complexity. I defined my particular objective in the possibility to abduct from Gaudì's imaginary reference the generatives codes that operate in the logical processing I use to create a possible species project. The next step was to verify the exact working of the new generative codes by means of 3d scenaries, that are recognizable as "Antoni Gaudì specie's architecture". Whit project processing on the generative codes and not on a possible resulting shape design, I was able to organize by my general paradigm the attributes of the project's species : different shapes, different attributes (color, scale, proportion), to get to possible and different scenarys, all recognizable by the relative class codes. I chose three examples in Barcellona built during the period 1902 to 1914 : The Parco Guell, Casa Batllò and Casa Milà are the three reference sceneryes that I used to create the generative codes. In the second step I defined different codes that operate in sequence (it is defined in the paradigm) : The generatives codes are only subjective; they are one possible solution of my interpretation of Antoni Gaudì's identity. This codes operate in four differents ways : Geometrical codes for 2d shapes Geometrical codes for interface relations Spatial codes for 3d extrusion of 2d shapes Geometrical codes for 2d and 3d texturing of generated surfaces. By a stratified application of this codes I arrived at one idea for all the generative processes but many different, possible scenaryes, all recognizable in Gaudì's species. So, my final result has made possible sceneryes belonging to related species defined previously. At the end of my research I designed a project by combination : using Antoni Gaudì's generative codes on a new 3d scenary with a shape catalyst : the Frank Lloyd Wright Guggenheim Museum of New York. In this process I created a "hybrid scenary" : a new species of architectural look; a Guggenheim museum planned by Wright with a god pinch of Gaudì.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	5fee
authors	Corso Pereira, Gilberto
year	1999
title	Visualizacao de Informacoes Urbanas atraves de Multimidia (Visualization of Urban Information by Means of Multimedia)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 239-243
summary	Visualization is a tool that can aid understanding of phenomenon, process and spatial structures. Another important function is communication, in urban applications case, between planners, technicians, administrators, researchers and citizens. Recent technological development applied to visualization area increments analyze and interpretation capacity. The word visualization used here, is related with the use of computation for data exploration in a visual form, helping comprehension. It is a process of transformation of raw data in images, in information and visual communication. GIS and cartography precede computers. In it development GIS benefited from information technologies development and in this process emphasis goes from treatment of great amount of data to analyze of that data. Computer graphics make possible process and present visually great volume of data, thing that was not possible by conventional methods. Digital data are the key for the plain utilization of potential already available with geoprocessing technologies. Information that interest urban planners came from several sources and information technologies beside integration and manipulation permit visual analyze of spatial data in diverse aspects, from witch the most evident but not less effective a map, tool that let us correlate a great variety of qualitative and quantitative data, for organization, interpretation, presentation and communication. In digital cartographic basic elements of cartographic science were preserved, but through new products, each one execute one of the roles that traditional map plays in different ways. Database replace paper map as way of geographical information storage and cartographic visualization replaces a second role - understanding and explanation - that was satisfied by printed maps. Salvador is one of the most important brazilians metropolis. The project that we discuss have as targets construction of salvador database to permit understanding of urban space through use of thematic cartography. Several steps of project include data acquisition, database formation using data conversion and results visualization through interactive, hypermedia and thematic cartography.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	26e4
authors	Da Rosa Sampaio, Andrea
year	1999
title	Design Thinking Proces and New Paradigms of Graphic Expression (Design Thinking Proces and New Paradigms of Graphic Expression)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 68-73
summary	It is undeniable that infotechnology has brought significant changes into architectural representation. Whether these changes has altered design conception proccess or are only media matters, is a discussion concerned with the role of graphic expression in architects designs. Is it just a language, or a design thinking tool, fully engaged with the formal solution? Thus, the investigation of the role of represententional systems in the design thinking proccess and the analysis of their intrinsic relationship will approach traditional methods facing the widespread use of Computer Aided Design. There are polemics about the issue: on the one hand, seductive simulations and a plethora of rendering choices available, on the other hand, impersonal expression, to name a few arguments for and against CAD use. Computers have not replaced the straight reciprocity between the acts of conceiving and drawing, between mind and image, which results in manual sketches, quite effective in embodying a design idea. Yet, we have to admit that manipulating complex forms such as Gehry's Guggenheim Museum quickly would not be feasible before CAD advent. We have been faced with new paradigms challenging the graphic expression of architects and urban designers. Besides the consequences of this new reality to design thinking, a crucial point to be stressed at this discussion is the possibility of achieving a balance between the cherished mind-hand intimacy and the available technological resources.
keywords	Traditional Representation, Design Thinking, CAD
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	2f1a
authors	Dabney, M.K., Wright, J.C. and Sanders, D.H.
year	1999
title	Virtual Reality and the Future of Publishing Archaeological Excavations: the multimedia publication of the prehistoric settlement on Tsoungiza at Ancient Nemea
source	New York: The Metropolitan Museum of Art
summary	The Nemea Valley Archaeological Project is a study of settlement and land use in a regional valley system in Greece extending from the Upper Paleolithic until the present. Active field research was conducted by four teams between 1981 and 1990. The first component was a regional archaeological survey. Second, and closely related to the first, was a social anthropological study of modern settlement and land use. Next was a team assigned to excavate the succession of prehistoric settlements of Ancient Nemea on Tsoungiza. Last, historical ecologists, a palynologist, and a geologist formed the environmental component of the research. As a result of advances in electronic publishing, plans for the final publication of the Nemea Valley Archaeological Project have evolved. Complete publication of the excavation of the prehistoric settlements of Ancient Nemea on Tsoungiza will appear in an interactive multimedia format on CD/DVD in Fall 2000. This project is planned to be the first electronic publication of the American School of Classical Studies at Athens. We have chosen to publish in electronic format because it will meet the needs and interests of a wider audience, including avocational archaeologists, advanced high school and college students, graduate students, and professional archaeologists. The multimedia format on CD/DVD will permit the inclusion of text, databases, color and black-and-white images, two and three-dimensional graphics, and videos. This publication is being developed in cooperation with Learning Sites, Inc., which specializes in interactive three-dimensional reconstructions of ancient worlds http://www.learningsites.com. The Nemea Valley Archaeological Project is particularly well prepared for the shift towards electronic publishing because the project's field records were designed for and entered in computer databases from the inception of the project. Attention to recording precise locational information for all excavated objects enables us to place reconstructions of objects in their reconstructed architectural settings. Three-dimensional images of architectural remains and associated features will appear both as excavated and as reconstructed. Viewers will be able to navigate these images through the use of virtual reality. Viewers will also be able to reference all original drawings, photographs, and descriptions of the reconstructed architecture and objects. In this way a large audience will be able to view architectural remains, artifacts, and information that are otherwise inaccessible.
series	other
last changed	2003/04/23 15:14

_id	ga9916
id	ga9916
authors	Elzenga, R. Neal and Pontecorvo, Michael S.
year	1999
title	Arties: Meta-Design as Evolving Colonies of Artistic Agents
source	International Conference on Generative Art
summary	Meta-design, the act of designing a system or species of design instead of a design instance, is an important concept in modern design practice and in the generative design paradigm. For meta-design to be a useful tool, the designer must have more formal support for both design species definition/expression and the abstract attributes which the designer is attempting to embody within a design. Arties is an exploration of one possible avenue for supporting meta-design. Arties is an artistic system emphasizing the co-evolution of colonies of Artificial Life design or artistic agents (called arties) and the environment they inhabit. Generative design systems have concentrated on biological genetics metaphors where a population of design instances are evolved directly from a set of ‘parent’ designs in a succession of generations. In Arties, the a-life agent which is evolved, produces the design instance as a byproduct of interacting with its environment. Arties utilize an attraction potential curve as their primary dynamic. They sense the relative attraction of entities in their environment, using multiple sensory channels. Arties then associate an attractiveness score to each entity. This attractiveness score is combined with a 'taste' function built into the artie that is sensitized to that observation channel, entity, and distance by a transfer function. Arties use this attraction to guide decisions and behaviors. A community of arties, with independent evolving attraction criteria can pass collective judgement on each point in an art space. As the Artie moves within this space it modifies the environment in reaction to what it senses. Arties support for Meta-design is in (A) the process of evolving arties, breeding their attraction potential curve parameters using a genetic algorithm and (B) their use of sensory channels to support abstract attributes geometries. Adjustment of these parameters tunes the attraction of the artie along various sensing channels. The multi-agent co-evolution of Arties is one approach to creating a system for supporting meta-design. Arties is part of an on-going exploration of how to support meta-design in computer augmented design systems. Our future work with Arties-like systems will be concerned with applications in areas such as modeling adaptive directives in Architecture, Object Structure Design, spatio-temporal behaviors design (for games and simulations), virtual ambient spaces, and representation and computation of abstract design attributes.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	a38c
authors	Emdanat, S., Vakalo, E.G. and Birmingham, W.
year	1999
title	Solving Form-Making Problems Using Shape Algebras and Constraint Satisfaction
doi	https://doi.org/10.52842/conf.ecaade.1999.620
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 620-625
summary	Shape grammars are well known approaches in design space exploration. This paper reviews the current work on shape grammars in design and suggests that considerable gains can be attained by integrating parametric shape grammar based design approaches with distributed constraint-based problem solving. Parametric grammars are represent design topologies while distributed constrain satisfaction can be used to maintain consistency and produce the space of feasible design solutions. Designers' decision making can be coordinated such that constraints cannot be violated and designs that exhibit the highest utility (value) are selected.
keywords	Shape Grammar, Shape Algebra, Constraint Satisfaction
series	eCAADe
email
last changed	2022/06/07 07:55

_id	5377
authors	Frazer, J.H., Tang, M.X. and Jian, S.
year	1999
title	Towards a Generative System for Intelligent Design Support
doi	https://doi.org/10.52842/conf.caadria.1999.285
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 285-294
summary	In the development of intelligent computer aided design systems, three important issues need to considered. These issues are: how to support the generation of product concepts using evolutionary computation techniques; how to use intelligent databases and constraint management systems for detailed exploration of product embodiment; and how to integrate rapid prototyping facilities for product evaluation. In this paper, we present a brief review of knowledge based design and evolutionary design and discuss ways of integrating both in the development of a generative design system. Based on this review, we present the model and its applications of a generative design system utilizing a number of AI and evolutionary computation techniques. This generative design model is intended to provide a generic computational framework for the development of intelligent design support systems.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	5689
authors	Garcia Alvarado, Rodrigo, Hempel Holzapfel, Ricardo and Parra, Juan Carlos
year	1999
title	Virtual Design for Innovative Timber Structures
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 319-326
summary	The major timber structures have great efficiency and beauty, but not many use in buildings due difficulties to represent and resolve theirs geometrical complexity, regulated by several constructive rules. The spatial richness and attractive of these structures can be a contribution in architecture, and encourage the use of wood. For aid the design and impels innovative solutions we are developing a computer system to program the geometrical regulations and allow a tridimensional visualization of different models with virtual-reality devices. First we are studing the architectural morphology and design process of structures more typically used; beams, trusses, frames and arcs. Establishing theirs proportions, distribution, shapes alternatives and the computational algorithm. In other hand we are evaluating the 3D-visualization in the innovation of designs. Some students of architecture developed in a virtual- system small projects based on other projects designed with traditional media. The models were compare by a panel of professors, considering overall quality and creativity. The results of that experience shows advantages in geometrical innovation, specially in organic shapes user-centered instead of orthogonal compositions. But also some constructive fails, which is necessary to support with related procedures.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	0eae
authors	Gero, J.S. and Kazakov, V.
year	1999
title	Using analogy to extend the behaviour state space in creative design
source	J.S. Gero and M.L. Maher (Eds.), Computational Models of Creative Design IV, Key Centre of Design Computing and Cognition, University of Sydney, Sydney, Australia, pp. 113-143
summary	We propose an exploration model of design based on the extension of the space of design behaviours using analogy. The analogy is drawn on the basis of structure similarity or structure and behaviour similarity between source and target designs. New behaviours are introduced from the source design. This paper describes such a process and discusses its significance for creative design.
keywords	Creative Design, Behaviour Analogy
series	other
email
last changed	2003/04/06 09:15

_id	c91a
authors	Gero, J.S. and Kazakov, V.
year	1999
title	Adapting evolutionary computing for exploration in creative designing
source	J.S. Gero and M.L. Maher (Eds.), Computational Models of Creative Design IV, Key Centre of Design Computing and Cognition, University of Sydney, Sydney, Australia, pp. 175-186
summary	This paper introduces a modification to genetic algorithms which provides computational support to creative designing by adaptively exploring design structure spaces. This modification is based on the re-interpretation of the GA's crossover as a random sampling of interpolations and its replacement with the random sampling of direct phenotype-phenotype interpolation and phenotype-phenotype extrapolation. Examples of the process are presented
keywords	Creative Design, Evolutionary Computation
series	other
email
last changed	2003/04/06 09:11

_id	7ad1
authors	Giordano, Rubén F. and Tosello, María Elena
year	1999
title	Laberinto: Una Biblioteca para la Virtualidad. Reflexiones y Acontecimientos en el Cyberespacio (Labyrinth: A Library for Virtuality. Reflections and Events in Cyberspace)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 83-86
summary	This project investigates in the limits of the word like only means of structuring of the thought, before the appearance of new paradigms: the multimedias and the ciber-space that have transformed so much the language written as the architectural one causing unpublished situations: 1.) The transformation of a concrete container to other virtual. 2.) The transformation of the design object, of one static material to another that is a process. 3.) The transformation in the traditional ways of thinking (reversible as the formal logic of the mathematics) to new imaginarys epistemologicals. // These non alone events have caused changes in the forms of to know and to communicate the reality but rather the same one suffers a dilation process. We present for their exploration, a road synthesized in some hypotheses that were elaborated with reason of the International Competition of ACADIA 1998: 1.) The new communication systems (cibercomunication) they generate a new territory that should be colonized. This territory this conformed by objects related by infinite bonds (hipertext). 2.) The topographical form is not lineal and sequential, this it is multidirectional and multiradial. The phenomenon of the blow-up and the dilation are the mechanisms with those that the new objects are generated. 3.) These related fields generate interstitial empty spaces where it appears the desire. The interstice like existential space.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ga0009
id	ga0009
authors	Lewis, Matthew
year	2000
title	Aesthetic Evolutionary Design with Data Flow Networks
source	International Conference on Generative Art
summary	For a little over a decade, software has been created which allows for the design of visual content by aesthetic evolutionary design (AED) [3]. The great majority of these AED systems involve custom software intended for breeding entities within one fairly narrow problem domain, e.g., certain classes of buildings, cars, images, etc. [5]. Only a very few generic AED systems have been attempted, and extending them to a new design problem domain can require a significant amount of custom software development [6][8]. High end computer graphics software packages have in recent years become sufficiently robust to allow for flexible specification and construction of high level procedural models. These packages also provide extensibility, allowing for the creation of new software tools. One component of these systems which enables rapid development of new generative models and tools is the visual data flow network [1][2][7]. One of the first CG packages to employ this paradigm was Houdini. A system constructed within Houdini which allows for very fast generic specification of evolvable parametric prototypes is described [4]. The real-time nature of the software, when combined with the interlocking data networks, allows not only for vertical ancestor/child populations within the design space to be explored, but also allows for fast "horizontal" exploration of the potential population surface. Several example problem domains will be presented and discussed. References: [1] Alias \| Wavefront. Maya. 2000, http://www.aliaswavefront.com [2] Avid. SOFTIMAGE. 2000, http://www.softimage.com [3] Bentley, Peter J. Evolutionary Design by Computers. Morgan Kaufmann, 1999. [4] Lewis, Matthew. "Metavolve Home Page". 2000, http://www.cgrg.ohio-state.edu/~mlewis/AED/Metavolve/ [5] Lewis, Matthew. "Visual Aesthetic Evolutionary Design Links". 2000, http://www.cgrg.ohio-state.edu/~mlewis/aed.html [6] Rowley, Timothy. "A Toolkit for Visual Genetic Programming". Technical Report GCG-74, The Geometry Center, University of Minnesota, 1994. [7] Side Effects Software. Houdini. 2000, http://www.sidefx.com [8] Todd, Stephen and William Latham. "The Mutation and Growth of Art by Computers" in Evolutionary Design by Computers, Peter Bentley ed., pp. 221-250, Chapter 9, Morgan Kaufmann, 1999.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

For more results click below: