Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 620

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade03_059_29_russel
id	ecaade03_059_29_russel
authors	Russell, P., Stachelhaus, T. and Elger, D.
year	2003
title	CSNCW: Computer Supported Non-Cooperative Work Barriers to Successful Virtual Design Studios
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 59-66
doi	https://doi.org/10.52842/conf.ecaade.2003.059
summary	The paper describes a design studio jointly undertaken by four Universities. With respect given to the groundbreaking work carried out by [Wojtowicz and Butelski (1998)] and [Donath et al 1999] and some of the problems described therein, the majority of the Studio partners had all had positive, if not exemplary experiences with co-operative studio projects carried out over the internet. The positive experience and development of concepts have been well documented in numerous publications over the last 5 years. A platform developed by one of the partners for this type of collaboration is in its third generation and has had well over 1000 students from 12 different universities in over 40 Projects. With this amount of experience, the four partners entered into the joint studio project with high expectations and little fear of failure. This experimental aspect of the studio, combined with the “well trodden” path of previous virtual design studios, lent an air of exploration to an otherwise well-worn format. Everything looked good, or so we thought. This is not to say that previous experiments were without tribulations, but the problems encountered earlier were usually spread over the studio partners and thus, the levels and distribution of frustration were more or less balanced. This raised a (theoretically) well-founded expectation of success. In execution, it was quite the opposite. In this case, the difficulties tended to be concentrated towards one or two of the partners. The partners spoke the same language, but came from different sets of goals, and hence, interpreted the agreements to suit their goals. This was not done maliciously, however the results were devastating to the project and most importantly, the student groups. The differing pedagogical methods of the various institutes played a strong role in steering the design critique at each school. Alongside these difficulties, the flexibility (or lack thereof) of each university’s calendar as well as national and university level holidays led to additional problems in coordination. And of course, (as if this was all not enough), the technical infrastructure, local capabilities and willingness to tackle technological problems were heterogeneous (to put it lightly).
keywords	CSCW: Virtual Design Studio; Mistakes in Pedagogy
series	eCAADe
email
more	http://caad.arch.rwth-aachen.de
last changed	2022/06/07 07:56

_id	9a1e
authors	Clayton, Mark J. and Vasquez de Velasco, Guillermo
year	1999
title	Stumbling, Backtracking, and Leapfrogging: Two Decades of Introductory Architectural Computing
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 151-158
doi	https://doi.org/10.52842/conf.ecaade.1999.151
summary	Our collective concept of computing and its relevance to architecture has undergone dramatic shifts in emphasis. A review of popular texts from the past reveals the biases and emphases that were current. In the seventies, architectural computing was generally seen as an elective for data processing specialists. In the early eighties, personal computers and commercial CAD systems were widely adopted. Architectural computing diverged from the "batch" world into the "interactive" world. As personal computing matured, introductory architectural computing courses turned away from a foundation in programming toward instruction in CAD software. By the late eighties, Graphic User Interfaces and windowing operating systems had appeared, leading to a profusion of architecturally relevant applications that needed to be addressed in introductory computing. The introduction of desktop 3D modeling in the early nineties led to increased emphasis upon rendering and animation. The past few years have added new emphases, particularly in the area of network communications, the World Wide Web and Virtual Design Studios. On the horizon are topics of electronic commerce and knowledge markets. This paper reviews these past and current trends and presents an outline for an introductory computing course that is relevant to the year 2000.
keywords	Computer-Aided Architectural Design, Computer-Aided Design, Computing Education, Introductory Courses
series	eCAADe
email
last changed	2022/06/07 07:56

_id	b7ff
authors	Mullins, Michael and Van Zyl, Douw
year	2000
title	Self-Selecting Digital Design Students
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 85-88
doi	https://doi.org/10.52842/conf.ecaade.2000.085
summary	Recent years have seen the increasing use of digital media in undergraduate architectural education at UND, and which has been fuelled by students themselves taking up the tools available to practising architects. This process of self-selection may hold valuable lessons for the development of architectural curricula. An experimental design studio offered as an elective to UND undergraduates in 1999 has indicated that the design work produced therein, most often differed remarkably from the previous work of the same students using only traditional media. In so far as digital environments rapidly provide new and strange objects and images for students to encounter, those students are driven to interpret, transform or customise that environment in innovative ways, thereby making it their own. It is clear that the full integration of digital environments into architectural education will profoundly effect the outcomes of student work. We have observed that some self-selecting students struggle in expressing ideas through repre-sentative form in traditional studios. The question arises whether these students are "onto something" which they intuitively understand as better suited to their abilities, or whether in fact they are see digital tools as a means to avoid those areas in design in which they experience difficulties. Through observation of a group of "self-selectors" the authors attempt to lead useful generalisations; to develop a theory and method for facilitators to deal with specific students; and to work toward the development of suitable curricula for these cases.
keywords	Architectural Education, Digital Media, Learning Styles
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:59

_id	2aaa
authors	Vásquez de Velasco, Guillermo and Hutchison, David
year	1999
title	Virtual Reality Meets Telematics: Design and Development of the Infinity Room
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 466-472
doi	https://doi.org/10.52842/conf.ecaade.1999.466
summary	The paper presents the findings of three years of experimentation in the use of compressed videoconferencing in international virtual design studios. Based on these findings, the authors elaborate on the development of a new videoconferencing interface: "The Infinity Room". The Infinity Room is a design studio space containing a floor-to-ceiling rear projection screen wall that conceals a dark room equipped with 5 video cameras and 4 video projectors that reproduce, on one-to-one scale, the images captured in a similar installation at a remote location. Operationally, the video cameras feed a computer that eliminate image redundancies, codes all the sources into a single entity and sends it as a compressed video signal to a remote computer that decodes and decompresses the images for synchronized delivery through the video projectors. The tiling effect of 4 synchronized and fully interactive video images creates the illusion of an adjacent room. The paper describes the design parameters used in the development of the Infinity Room and elaborates on the technology that makes it feasible. Requirements and constraints on physical space, hardware, software, and networking are discussed. The paper ends with conclusions that highlight the technical feasibility of building a small-scale prototype.
keywords	Virtual Design Studio (VDS), Virtual Reality (VR), Telematics, Videoconferencing, Collaborative Design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	108f
authors	Vassigh, Shahin
year	1999
title	Structures E-Book
source	ACADIA Quarterly, vol. 18, no. 3, pp. 15-15
doi	https://doi.org/10.52842/conf.acadia.1999.015
summary	Although understanding structures is central to the education of the architect, the engineering-based instructional materials currently in use are fundamentally inappropriate for the vast majority of architecture students. The teaching of structures is constrained by content, teaching methods and texts, which are increasingly ineffective in the classroom. Nonengineering (especially architecture) faculty and their student’s struggle with an aging, engineering-based approach to instruction, which is inappropriately quantitative, abstract and unrelated to the practical and creative aspects of design. The consequences of using this pedagogy are that many architecture students fail to master basic structural concepts, much less the more demanding aspects of practical application.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
doi	https://doi.org/10.52842/conf.acadia.2021.530
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ga9906
id	ga9906
authors	Caglioti, Giuseppe
year	1999
title	Ambiguity in Art and Science
source	International Conference on Generative Art
summary	Ambiguity can be defined as the coexistence and/or coalescence of two incompatible aspects in the same reality. Ambiguity manifests itself * in pathologic processes occurring in matter, e.g. at the critical state of the solid ¬ ® liquid phase transformation. * during the process of measurement of quantum structures: a process formally very similar to the process of perception. * Systematically, in our mind, during the process of perception - especially during visual perception of paintings or acoustic perception of music.Therefore ambiguity is an intrinsic feature of the process of perception and an intriguing step in the way toward the formation of thought. Ambiguity is continuosly experienced in our mind: every act of perception culminates into the critical state of a dynamic instability of the interiorized image, where the incoherent heap of sensory stimuli merges into coherent visual or auditive thinking. In turn, since perception is essential for life, we should look at ambiguity not so much as to a fastidious travel companion, but rather as to a fixed course toward perception itself, scientific thought and aesthetic emotion: ambiguity is a permanent cultural value.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	da88
authors	Chang, Teng-Wen
year	1999
title	Geometric typed feature structures : toward design space exploration
source	University of Adelaide, School of Architecture
summary	Demonstrates the significance and usefulness of representation in geometry by generating various floor design layouts for a typical Australian house, a single fronted cottage and the building enclosures
keywords	Domestic Australia Designs and Plans; Mathematics; Combinatorial Designs and Configurations
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	dd16
authors	Gibson, Kathleen
year	1999
title	STUDIO @ CORNELL
source	ACADIA Quarterly, vol. 18, no. 2, pp. 18-21
doi	https://doi.org/10.52842/conf.acadia.1999.018.2
summary	Unique to the interior design program at Cornell University is a planned pedagogical approach requiring equal emphasis toward manual and digital graphic communication at the freshman level. Prior to 1998, computer-based instruction only occurred at the junior year of study. Recognizing that cultural and symbolic biases against digital media were formally being instituted by curriculum policy, faculty searched for a new perspective. Central to success was the removal of illogically placed boundaries, both mental and physical. In response, students are now encouraged to cultivate a fluid dexterity between traditional and digital methods, at times using various skills concurrently for design analysis and representation (Figures 1, 2, 3, 4, 5, 6, 7). Course content for DEA115 ranges from basic orthographic drafting, paraline projection, and perspective drawing to color rendering and composition. Students utilize a full range of media: pencil, ink, marker, pastel, AutoCAD, 3DS/ MAX, and Photoshop in this graphics studio. Course meetings total six contact hours per week, constituting a three credit hour class. Assignments are purposefully created to shatter digital myths. For example, instead of a standard, rote drafting exercise, AutoCAD is used to explore design ideas through systemic object manipulation (Figures 8, 9).
series	ACADIA
last changed	2022/06/07 07:51

_id	8735
authors	James, Stephen
year	1999
title	An Allegorical Architecture: A Proposed Interpretive Center for the Bonneville Salt Flats
source	ACADIA Quarterly, vol. 18, no. 1, pp. 18-19
doi	https://doi.org/10.52842/conf.acadia.1999.018
summary	Architecture is the physical expression of man's relationship to the landscape- an emblem of our heritage. Such a noble statement sounds silly into today's context, because civilized society has largely disassociated itself from raw nature. We have tamed the elements with our environmental controls and turned the deserts into pasture. I find much of the built environment distracting. Current architecture is trite, compared to geologic form and order. I visited the Bonneville Salt Flats- (Utah's anti-landscape) in the summer of 1997. The experience of arriving at the flats exceeded my expectations. I was overpowered by a sense of personal insignificance - a small spot floating on a sea of salt. The horizon seemed to swallow up the sky. Off in the distance I noticed a dark fleck. It looked as foreign as I felt on this pure white plane. I drove across the sticky salt toward it, only to discover an old rusty oil barrel half submerged in salt. In my mind, the barrel has a history. It tells the story of a man's attempt at achieving a goal, or maybe it represents a broken dream left to corrode in the alkali flats. The barrel remains planted in the salt as a relic for those who venture into the white wilderness. This experience left me to ponder whether or not architecture can serve the same purpose - telling the story of a place through its relationship to a landscape, and connection to events.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	0a45
authors	Lee, K.
year	1999
title	Principles of CAD/CAM/CAE Systems
source	New York: Addison-Wesley 1999
summary	An Introduction to CAD/CAM/CAE is a timely text with coverage of many modern topics, including: rapid prototyping, virtual engineering, NT-based solid modeling systems, and Web-related issues. This book provides balanced coverage of CAD/CAM (with slightly more emphasis on CAD topics) and bonus coverage of computer-aided engineering (CAE). This book's emphasis on the integration of three related disciplines-CAD, CAM, and CAE-makes it a great theoretical introduction to all subjects from geometric representation to the most sophisticated CAE subjects. Many illustrations and references ground the theory in practical examples. The book also features a unique illustration of the whole product development process through a practical case study that gives readers a clear idea how CAD, CAM, and CAE systems are integrated to accelerate the product development process. This book is carefully targeted toward today's students; topics are introduced in a concise, efficient manner, with mathematical terminology that is kept to a minimum. A background in programming, calculus, and matrix and vector algebra is helpful when using this text.
series	other
last changed	2003/04/23 15:14

_id	c36d
authors	Mahdavi, A.
year	1999
title	A comprehensive computational environment for performance based reasoning in building design and evaluation
source	Automation in Construction 8 (4) (1999) pp. 427-435
summary	This paper introduces a comprehensive computational implementation effort toward the incorporation of simulation-based performance evaluation in building design. Specifically, the computational design support system `SEMPER' will be described. SEMPER's main objectives are: (i) a methodologically consistent (first-principles-based) and flexible performance modeling approach through the entire building design and engineering process; (ii) provision of comprehensive, i.e., multi-domain building performance evaluation support; (iii) seamless and dynamic communication between the simulation model and the general building representation in an object-oriented space-based design environment; and (iv) active convergence support via a bi-directional inference mechanism that provides not only the conventional design-to-performance mapping option but also a `preference-based' performance-to-design mapping technology.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	170f
authors	Mora Padrón, Víctor Manuel
year	1999
title	Integration and Application of Technologies CAD in a Regional Reality - Methodological and Formative Experience in Industrial Design and Products Development
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 295-297
summary	The experience to present is begun and developed during the academic year 1998, together to the course of IV pupils level of the Industrial Design career in the Universidad del Bío-Bío, labor that I have continued assuming during the present year, with a new youths generation. We have accomplished our academic work taking as original of study and base, the industrial and economic situation of the VIII Region, context in the one which we outline and we commit our needs formative as well as methodological to the teaching of the discipline of the Industrial Design. Consequently, we have defined a high-priority factor among pupils and teachers to reach the objectives and activities program of the course, the one which envisages first of all a commitment of attitude and integrative reflection among our academic activity and the territorial human context in the one which we inhabit. In Chile the activity of the industrial designer, his knowledge and by so much his capacity of producing innovation, it has been something practically unknown in the industrial productive area. However, the current national development challenges and the search by widening our markets, they have created and established a conscience of the fact that the Chilean industrial product must have a modern and effective competitiveness if wants be made participates in segments of the international marketing. It is in this new vision where the design provides in decisive form to consider and add a commercial and cultural value in our products. To the university corresponds the role of transmitting the knowledge generated in his classrooms toward the society, for thus to promote a development in the widest sense of the word. Under this prism the small and median regional industry in their various areas, have not integrated in the national arrangement in what concerns to the design and development of new and integral products. The design and the innovation as motor concept for a competitiveness and permanency in new markets, it has not entered yet in the entrepreneurial culture. If we want to save this situation, it is necessary that the regional entrepreneur knows the importance of the Design with new models development and examples of application, through concrete cases and with demands, that serve of base to demonstrate that the alliance among Designer and Industry, opens new perspectives of growth upon offering innovation and value added factors as new competitiveness tools. Today the communication and the managing of the information is a strategic weapon, to the moment of making changes in a social dynamics, so much at local level as global. It is with this look that our efforts and objective are centered in forming to our pupils with an integration speech and direct application toward the industrial community of our region, using the communication and the technological information as a tool validates and effective to solve the receipt in the visualization of our projects, designs and solutions of products. As complement to the development of the proposed topic will be exhibited a series of projects accomplished by the pupils for some regional industries, in which the three dimensional modeling and the use of programs vectoriales demonstrate the efficiency of communication and comprehension of the proposals, its complexity and constructive possibilities.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	b761
authors	Snyder, James and Flemming, Ulrich
year	1999
title	Information Sharing in Building Design
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 165-183
summary	We address information modeling and exchange in asynchronous, distributed collaboration between software applications or design agents that are heterogeneous, that is, developed independently based on application- specific data models. We identify the requirements an integration environment must satisfy if it is to support the semantically correct exchange of selected, locally generated information between the agents. These requirements are distilled from both the literature and our own experiments with the Object Modeling Language OML. The resulting requirements were then formalized into an information modeling and exchange environment constructed around the modeling language called SPROUT (supported by a compiler) and an associated software architecture that can be targeted toward many different hardware and software platforms. A unique capability supported in this environment is formal support for integrating existing applications: Given a schematic description in SPROUT, a formal specification can be used to generate computer programs that provably map data to and from the applications.
keywords	Building Models, Conceptual Modeling, Product Modeling, Information Modeling, Design Tool Integration
series	CAAD Futures
email
last changed	2006/11/07 07:23

_id	53a4
authors	Vélez Jahn, Gonzalo
year	1999
title	The MUMOVIAR (Museum for Modeling Virtual Architecture) - A Proposal for a Research Theme (The Mumoviar (For Museum Virtual Modeling Architecture) - to for Proposal to Research Theme)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 379-383
summary	One of the most interesting areas in the forefront of non-immersive virtual reality (VRML) applications to architecture is the one that concerns the design, construction and exploration of on-line multi-access worlds using the Internet-WWW. However, and despite the great proliferation of earlier single-access models built on VRML, attempts to collect, classify and provide accesibility that type of models has proved almost nil. On the other side, one of the architectural typologies that promises the greatest transformation potential in the virtual architecture area in cyberspace is the one that concerns virtual museums and galleries. This paper seeks to provide a bridge between the two aforementioned approaches by formulating a conceptual basis for the creation of a virtual, on-line, multi-access museum intended to house collections of VRML building models. Such models, initially shown at a conventional model scale, would be accessed by visitors through an interface intended to transport those visitors into the models’ environments, where changes in scale could provide navigation access to interior and exterior view of the building . Accordingly, the museum would act as a sort of "spaceport” toward different routes of exploration. This modelistic cascading seems to offer interesting possibilities as regards future virtual architecture applications.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	728c
authors	Wilson, John E.
year	1999
title	3D Modeling in AutoCAD: Creating and Using 3D Models in AutoCAD 2000
source	Miller Freeman Publishing
summary	From drawing plans for the latest car to a dream house, AutoCAD is the drafting and drawing program of choice. If you have a working knowledge of AutoCAD, this book with CD-ROM will help you advance to the program's next level -- its remarkably powerful capabilities in 3D. Leading you step by step toward mastering 3D design and drafting with AutoCAD 2000, John E. Wilson fully explains the concepts and principles of the program's 3D features, and provides useful illustrations, examples, and hands-on exercises. The book describes every 3D command in detail, reaching beyond AutoCAD's on-screen help and program manuals to guide you through working with 3D wireframe models in 3D space; building surface models; solid modeling; 2D output and paper space; and renderings from 3D models.
series	other
last changed	2003/02/26 18:58

_id	93a8
authors	Anders, P.
year	1999
title	Envisioning Cyberspace: Designing 3D Electronic Spaces
source	McGraw-Hill, NY
summary	Free of the constraints of physical form and limited only by imagination, new environments spring to life daily in a fantastic realm called cyberspace. The creators of this new virtual world may be programmers, designers, architects, even children. In this invigorating exploration of the juncture between cyberspace and the physical world, architect Peter Anders brings together leading-edge cyberspace art and architecture ... inspiring new techniques and technologies ... unexpected unions of reality and virtuality ... and visions of challenges and opportunities as yet unexplored. More than an invitation to tour fantastic realms and examine powerful tools, this book is a hard-eyed look at cyberspace's impact on physical, cultural, and social reality, and the human-centered principles of its design. This is a book that will set designers and architects thinkingNand a work of importance to anyone fascinated with the fast-closing space between the real and the virtual.
series	other
email
last changed	2003/04/23 15:14

_id	b6d4
authors	Rousse, Pierre
year	1999
title	Envisioning an Urban space that Integrates Architecture into an Information Oriented Society
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 197-200
summary	There is an assumption that architecture can provide an evocative vision of an artificial environment using digitalized and wireless communication technology. It is a ideal based on perception of virtual space, where distance is minimized through the continual process of breaking barriers in none visible planes. It is domain of mind, in which the object becomes real by individual choice. It is conceived in a plane known as virtual space or cyber space. Marcos Novak describes it as "space created as habitat for our imagination". I approach the topic trying to establish a connection between the boundaries of virtual space and real space through architecture. These are the objectives of my inquiry: 1) To explore an architectural form in a media of non-concrete space. Space created by a negative space (empty space, residual space, loading space). 2) To define a new technology that marks the beginning of a real virtual environment accessible to everybody. Proposing the idea of socialization through the architecture and revitalizing negative spaces comprehended as valuable public places. 3) Identification and representation of sources that make possible telecommunication technology in an enclosed space. Prototype of a new communicational platform re-interpreted by cyber space, digital images, high-speed data, mobile Internet and application based on Intranets, extranets and mobile multimedia.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ga9925
id	ga9925
authors	Ambrosini, L., Longatti, M. and Miyajima, H.
year	1999
title	Time sections, abstract machines
source	International Conference on Generative Art
summary	conditions a time-spatial discontinuity in the urban grid, ancient walls casually discovered in a substrate of the contemporary town needs a surplus of information to be understood and interfaced with their current condition. diagrams diverse chronological stages of the urban evolution are mapped on the area, in order to read the historical stratifications as a multiplicity of signs; this abstract approach leads to consider the roman space as guided by metrics, a system of measure superimposed on the landscape, vs. medioeval spatial continuity, where more fluid relations between the same urban elements create a completely different pattern.assemblage (time sections) a surface, automatically displaced from the medioeval diagram, moves along the z axis, the historical stratification direction, intersecting in various, unpredictable, manners a series of paths; these paths start as parallels, allowing an undifferentiated access to the area, and mutate along their developing direction, intertweening and blending each other; linear openings are cut on the surface, virtually connecting the two levels by light, following the roman grid in rhythm and measure. Projected on the lateral wall, the cadence of the vertical and horizontal elements becomes a temporal diagram of the design process.movement time takes part into the process through two kinds of movement: the first one, freezed when reaches the best results, in terms of complexity, is given by the surface intersecting the tubular paths; the second one is represented by multiple routes walking on which the project can be experienced (in absence of any objective, fixed, point of view, movement becomes the only way to understand relations). Thresholds between typical architectural categories (such as inside-outside, object-landscape etc.) are blurred in favour of a more supple condition, another kind of continuity (re)appears, as a new media, between the different historical layers of the city.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

For more results click below: