Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 614

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	f500
authors	Almeida Sampaio, A.
year	1999
title	Automation of Deck Bridge Representations
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 69-79
summary	The bridge deck has a apparent simple shape, but it is the result of an adequate combination of two longitudinal geometric components: the deck shape evolution along de longitudinal section the layout of the road, that acts in simultaneous over a cross section, defining the deck exact shape. A geometric modelling computer programme was developed for box girder decks, allowing the generation of cross sections along the deck, defined with correct shape and location. In the elaboration of the deck plan drawings, the geometric information of the real deck shape is required. This information is not managed in an integrated and automatic way. On the creation of these drawings, directly executed over a graphic system, the time consumed is considerable and it is easy to comet errors. This paper describes the drawing module included in the computer program refereed. The deck plan projections are obtained, in DXF format drawing files, using the geometric information obtained from 3D-deck model. Using the drawing module it is possible to generate the usual deck drawings required in bridge design process. Then, his module is a great support for the design process within its geometric design stage.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	f51a
authors	Del Pup, Claudio
year	1999
title	Carbon Pencil, Brush and Mouse, Three Tools in the Learning Process of New University Art Designers
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 420-425
summary	This article develops the introduction of computer technologies in the fine arts environment the use of these new tools, sharing the process of creation and interacting at the same level with older technics, breaks the myth of technology and tries to reach the right place according to current or modern advances. As an introduction, it explains the insertion in the current courses of study of the "computer languages area", its implementation, present situation and future stages. An important point we have developed is the teaching methodology, to solve the transition of those who, challenging their investigations in different areas, like fire arts, graphic arts, film or video, need the support of computers. The first steps consist in designing sample courses, which allow the measurement of results, the definition of concepts like extension, capacities, teaching hours and the most important, a methodology to share the enthusiasm of creation with the difficulties of learning a new technique it is necessary to discover limits, to avoid easy results as a creative tool one of the most important problems we have faced is the necessity of coordinating the process of creation with the individual time of a plastic artist, finding the right way that allows the integration of all the group, minimizing desertion and losing of motivation. Two years later, the first results in the field of digital image investigations and assistance in form design. Volume as a challenge and solutions supported in techniques of modeling in 3D (experiences of modeling a virtual volume from a revolution profile, its particular facts and the parallelism with potter's lathe the handling of image as the most important element, as an work of art itself, but also as a support in the transmission of knowledge (design of a CD as a tool for the department of embryology of medical school with the participation of people from the medical school, engineering school and school of fine arts). Time as a variable, movement, animation and its techniques, multimedia (design of short videos for the 150th anniversary of the Republic University). Conclusions, good hits, adjustments, new areas to include, problems to solve, the way of facing a constantly evolving technology.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	39cb
authors	Kelleners, Richard H.M.C.
year	1999
title	Constraints in object-oriented graphics
source	Eindhoven University of Technology
summary	In the area of interactive computer graphics, two important approaches to deal with the complexity of designing and implementing graphics systems are object-oriented programming and constraint-based programming. From literature, it appears that combination of these two has clear advantages but has also proven to be difficult. One of the main problems is that constraint programming infringes the information hiding principle of object-oriented programming. The goal of the research project is to combine these two approaches to benefit from the strengths of both. Two research groups at the Eindhoven University of Technology investigate the use of constraints on graphics objects. At the Architecture department, constraints are applied in a virtual reality design environment. At the Computer Science department, constraints aid in modeling 3D animations. For these two groups, a constraint system for 3D graphical objects was developed. A conceptual model, called CODE (Constraints on Objects via Data flows and Events), is presented that enables integration of constraints and objects by separating the object world from the constraint world. In the design of this model, the main aspect being considered is that the information hiding principle among objects may not be violated. Constraint solvers, however, should have direct access to an object’s internal data structure. Communication between the two worlds is done via a protocol orthogonal to the message passing mechanism of objects, namely, via events and data flows. This protocol ensures that the information hiding principle at the object-oriented programming level is not violated while constraints can directly access “hidden” data. Furthermore, CODE is built up of distinct elements, or entity types, like constraint, solver, event, data flow. This structure enables that several special purpose constraint solvers can be defined and made to cooperate to solve complex constraint problems. A prototype implementation was built to study the feasibility of CODE. Therefore, the implementation should correspond directly to the conceptual model. To this end, every entity (object, constraint, solver) of the conceptual model is represented by a separate process in the language MANIFOLD. The (concurrent) processes communicate by events and data flows. The implementation serves to validate the conceptual model and to demonstrate that it is a viable way of combining constraints and objects. After the feasibility study, the prototype was discarded. The gained experience was used to build an implementation of the conceptual model for the two research groups. This implementation encompassed a constraint system with multiple solvers and constraint types. The constraint system was built as an object-oriented library that can be linked to the applications in the respective research groups. Special constructs were designed to ensure information hiding among application objects while constraints and solvers have direct access to the object data. CODE manages the complexity of object-oriented constraint solving by defining a communication protocol to allow the two paradigms to cooperate. The prototype implementation demonstrates that CODE can be implemented into a working system. Finally, the implementation of an actual application shows that the model is suitable for the development of object-oriented software.
keywords	Computer Graphics; Object Oriented Programming; Constraint Programming
series	thesis:PhD
last changed	2003/02/12 22:37

_id	ga9910
id	ga9910
authors	Mottram, Chiron and Penn, Alan
year	1999
title	Slugfest
source	International Conference on Generative Art
summary	This paper describes the creation of interactive and responsive digital art. By adding a message handling interpreter to SGI's Performer software we have created a medium within which interactions between virtual objects and interactions with the user are made possible. By making objects within the medium responsive to each other it is possible to create emergent effects. By making the medium responsive to the user the viewer is more intimately involved in the artwork. However, at the same time this requires the artist to work with the intrinsic properties of emergence in the system to and to develop the audience relationship by means of involvement in a manner more akin to performance than the plastic arts.The use of virtual reality allows the creation of a profusion of different forms and behaviours not possible in conventional plastic media. The aesthetic of these forms can be governed in two ways, either by in built rules or by direct intervention by the artist/audience persona. The built in rules can be changed dynamically as can the objects' actions as mediated by the viewer's intervention. Underlying this is the aesthetic produced by the machinery of the computer, which can both impede and improve this process, this is the illusion of 3D provided by the Performer libraries in conjuction with the SGI box, and the many constraints implied by this. As such we are also limited by the input devices, though the mouse has now almost become synonymous with the pen, as a means by which our interaction with computer is governed. The paper describes a series of pieces which explore the boundaries of generated and evolving artworks in which kinetics and morphogenesis are integral to investigations of social interaction between virtual performers.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	d8df
authors	Naticchia, Berardo
year	1999
title	Physical Knowledge in Patterns: Bayesian Network Models for Preliminary Design
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 611-619
doi	https://doi.org/10.52842/conf.ecaade.1999.611
summary	Computer applications in design have pursued two main development directions: analytical modelling and information technology. The former line has produced a large number of tools for reality simulation (i.e. finite element models), the latter is producing an equally large amount of advances in conceptual design support (i.e. artificial intelligence tools). Nevertheless we can trace rare interactions between computation models related to those different approaches. This lack of integration is the main reason of the difficulty of CAAD application to the preliminary stage of design, where logical and quantitative reasoning are closely related in a process that we often call 'qualitative evaluation'. This paper briefly surveys the current development of qualitative physical models applied in design and propose a general approach for modelling physical behaviour by means of Bayesian network we are employing to develop a tutoring and coaching system for natural ventilation preliminary design of halls, called VENTPad. This tool explores the possibility of modelling the causal mechanism that operate in real systems in order to allow a number of integrated logical and quantitative inference about the fluid-dynamic behaviour of an hall. This application could be an interesting connection tool between logical and analytical procedures in preliminary design aiding, able to help students or unskilled architects, both to guide them through the analysis process of numerical data (i.e. obtained with sophisticate Computational Fluid Dynamics software) or experimental data (i.e. obtained with laboratory test models) and to suggest improvements to the design.
keywords	Qualitative Physical Modelling, Preliminary Design, Bayesian Networks
series	eCAADe
email
last changed	2022/06/07 07:59

_id	206caadria2004
id	206caadria2004
authors	Ricardo Sosa and John S. Gero
year	2004
title	Diffusion of Design Ideas: Gatekeeping Effects
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 287-302
doi	https://doi.org/10.52842/conf.caadria.2004.287
summary	Designers and design managers are interested in gaining a deeper understanding of the complexities of creativity and innovation (Langdon and Rothwell 1985). These two phenomena can be seen as complementary dimensions of a differentiation cycle where design plays a key value-adding role that gradually reduces through commoditisation. However, there is a lack of relevant evidence to explain the link between creativity and innovation. Creativity is increasingly considered as occurring in the interaction between the individual generator of an idea and a group of evaluators (Sawyer et al 2003). However, most studies have regarded the generation of a solution -and not its social impact- as the outcome of the creative process (Runco and Pritzker 1999). Accordingly, computational modelling of creativity has been mainly conducted in a social void (Boden 1999).
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	3d23
authors	Sellgren, Ulf
year	1999
title	Simulation-driven Design
source	KTH Stockholm
summary	Efficiency and innovative problem solving are contradictory requirements for productdevelopment (PD), and both requirements must be satisfied in companies that strive to remainor to become competitive. Efficiency is strongly related to ”doing things right”, whereasinnovative problem solving and creativity is focused on ”doing the right things”.Engineering design, which is a sub-process within PD, can be viewed as problem solving or adecision-making process. New technologies in computer science and new software tools openthe way to new approaches for the solution of mechanical problems. Product datamanagement (PDM) technology and tools can enable concurrent engineering (CE) bymanaging the formal product data, the relations between the individual data objects, and theirrelation to the PD process. Many engineering activities deal with the relation betweenbehavior and shape. Modern CAD systems are highly productive tools for conceptembodiment and detailing. The finite element (FE) method is a general tool used to study thephysical behavior of objects with arbitrary shapes. Since a modern CAD technology enablesdesign modification and change, it can support the innovative dimension of engineering aswell as the verification of physical properties and behavior. Concepts and detailed solutionshave traditionally been evaluated and verified with physical testing. Numerical modeling andsimulation is in many cases a far more time efficient method than testing to verify theproperties of an artifact. Numerical modeling can also support the innovative dimension ofproblem solving by enabling parameter studies and observations of real and syntheticbehavior. Simulation-driven design is defined as a design process where decisions related tothe behavior and performance of the artifact are significantly supported by computer-basedproduct modeling and simulation.A framework for product modeling, that is based on a modern CAD system with fullyintegrated FE modeling and simulation functionality provides the engineer with tools capableof supporting a number of engineering steps in all life-cycle phases of a product. Such aconceptual framework, that is based on a moderately coupled approach to integratecommercial PDM, CAD, and FE software, is presented. An object model and a supportingmodular modeling methodology are also presented. Two industrial cases are used to illustratethe possibilities and some of the opportunities given by simulation-driven design with thepresented methodology and framework.
keywords	CAE; FE Method; Metamodel; Object Model; PDM; Physical Behavior, System
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ga9919
id	ga9919
authors	Strehlke, Kai
year	1999
title	xWORLDS, the implementation of a three-dimensional collaborative sketch tool within the context of a third year design course
source	International Conference on Generative Art
summary	This work is the result of a postgraduate thesis done at the chair for Architecture and CAAD at the ETH in Zurich Switzerland. It proposes a prototype for a three-dimensional modelling tool in a networked environment. The work is composed of two distinct parts. (1) A modeling tool to create three-dimensional objects in an intuitive and interactive manner. (2) A database component to store and retrieve the objects. This modeller has been implemented for the first time in a design course, where students where using the modeller to sketch and interact within a large group to formulate aspects of their design. The Paper focuses on the modeller and on the experience from a one week workshop.1. Modelling Tool. The modeling tool operates in two different modes: (A). Composing cubic forms within a limited cubic space. (B). Deforming the composition of boxes by means of their interaction with a separate volume. For the composition of cubes, the user has to drag a cube with the mouse to continue placing cubes in space. Furthermore, he can move and delete the placed cubes. Simple and complex objects can be created this way, in an easy and intuitive manner. For the second mode, the forms are generated by intersecting a volume with an object created previously in the first mode. The volume can be scaled and moved. The part of the existing object located outside the volume remains unchanged, while the part that lies inside it is transformed in the same way as the volume. Complex forms can be created in this way with simple transformations. 2. Database Storage and Retrieval.The created objects can be stored in a database. Other users can access the objects stored in the database and continue working on them in the same modeling environment. There are two ways to interact with objects from the database. On one side it is possible to substitute the composition of cubes, and keep the distorted framestructure of the currently active object unchanged. On the other side it is possible to initiate a morphing process between the currently active framestructure and the framestructure of an object from the database. This process can be stopped at any time. It is always possible to switch back in the modeling modus and continue work on the object.3. Workshop at the the School of Design at the Hong Kong Polytechnic University.A Group of over 100 students were using the tool in a second year design course. The tool has been implemented as part of a workshop in the second half of the design studio. The workshop lasted for one week in which a collective dataset of over 1000 models has been created by the students. Afterwards, a possibility was given to the students to retrieve models from the database and to process them in different software packages or have them physically built by a 3D printer, and then continue working on the physical model.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	9c96
authors	Szalapaj, Peter and Chang, David C.
year	1999
title	Computer Architectural Representation - Applying the VOIDs Framework to a Bridge Design Scheme
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 387-394
doi	https://doi.org/10.52842/conf.ecaade.1999.387
summary	A virtual environment presents sensory information and visual feedback to the user in order to give convincing illusion of an artificial world. In the architectural profession, the spatio-temporal metaphor in itself constitutes significant information retrieval, because we understand architecture by seeing it. This paper attempts to understand, and then to analyse the characteristics of representation of architectural models in virtual environments. We will examine the use and creativity of current computer generated architectural presentation in virtual environments. Our observations will be applied to the modelling of a bridge in Castlefield, Manchester, and evaluated by a group of students within the School of Architecture at Sheffield University. The conclusion of this paper will be the presentation of a conceptual structure for representing architectural models in virtual environments. This paper also explores the tension between the correspondence and constructivist views of representation. The correspondence view of representation relies on the idea that a representation corresponds to what is out there in the world. The constructivist view of representation advocates that any actual interpretation would depend on the context of their social and cultural backgrounds. However, the authors believe there should be a combination of these two views for architectural representation in virtual environments, and a framework developed by the authors - VOIDs will be presented.
keywords	Virtual Environment, Architectural Representation, VOIDs, Correspondence, Constructivist
series	eCAADe
email
last changed	2022/06/07 07:56

_id	44c0
authors	Van Leeuwen, Jos P.
year	1999
title	Modelling architectural design information by features : an approach to dynamic product modelling for application in architectural design
source	Eindhoven University of Technology
summary	Architectural design, like many other human activities, benefits more and more from the ongoing development of information and communication technologies. The traditional paper documents for the representation and communication of design are now replaced by digital media. CAD systems have replaced the drawing board and knowledge systems are used to integrate expert knowledge in the design process. Product modelling is one of the most promising approaches in the developments of the last two decades, aiming in the architectural context at the representation and communication of the information related to a building in all its aspects and during its complete life-cycle. However, after studying both the characteristics of the product modelling approach and the characteristics of architectural design, it is concluded in this research project that product modelling does not suffice for support of architectural design. Architectural design is characterised mainly as a problem solving process, involving illdefined problems that require a very dynamic way of dealing with information that concerns both the problem and emerging solutions. Furthermore, architectural design is in many ways an evolutionary process. In short term this is because of the incremental approach to problem solving in design projects; and in long term because of the stylistic development of designers and the continuous developments in the building and construction industry in general. The requirements that are posed by architectural design are concentrated in the keywords extensibility and flexibility of the design informationmodels. Extensibility means that designers can extend conceptual models with definitions that best suit the design concepts they wish to utilise. Flexibility means that information in design models can be structured in a way that accurately represents the design rationale. This includes the modelling of incidental characteristics and relationships of the entities in the model that are not necessarily predefined in a conceptual model. In general, product modelling does not adequately support this dynamic nature of design. Therefore, this research project has studied the concepts developed in the technology of Feature-based modelling, which originates from the area of mechanical engineering. These concepts include the usage of Features as the primitives for defining and reasoning about a product. Features have an autonomous function in the information model, which, as a result, constitutes a flexible network of relationships between Features that are established during the design process. The definition of Features can be specified by designers to formalise new design concepts. This allows the design tools to be adapted to the specific needs of the individual designer, enlarging the library of available resources for design. In addition to these key-concepts in Feature-based modelling as it is developed in the mechanical engineering context, the project has determined the following principles for a Feature-based approach in the architectural context. Features in mechanical engineering are used mainly to describe the lowest level of detail in a product's design, namely the characteristics of its parts. In architecture the design process does not normally follow a strictly hierarchical approach and therefore requires that the building be modelled as a whole. This implies that multiple levels of abstraction are modelled and that Features are used to describe information at the various abstraction levels. Furthermore, architectural design involves concepts that are non-physical as well as physical; Features are to be used for modelling both kinds. The term Feature is defined in this research project to reflect the above key-concepts for this modelling approach. A Feature is an autonomous, coherent collection of information, with semantic meaning to a designer and possibly emerging during design, that is defined to formalise a design concept at any level of abstraction, either physical or non-physical, as part of a building model. Feature models are built up entirely of Features and are structured in the form of a directed graph. The nodes in the graph are the Features, whereas the arcs are the relationships between the Features. Features can be of user-defined types and incidental relationships can be added that are not defined at the typological level. An inventory in this project of what kind of information is involved in the practice of modelling architectural design is based on the analysis of a selection of sources of architectural design information. This inventory is deepened by a case study and results in the proposition of a categorisation of architectural Feature types.
keywords	Automated Management Information Systems; Computer Aided Architectural Design; Information Systems; Modelling
series	thesis:PhD
email
more	http://www.ds.arch.tue.nl/jos/thesis/
last changed	2003/02/12 22:37

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	d423
authors	Arvin, Scott A. and House, Donald H.
year	1999
title	Making Designs Come Alive: Using Physically Based Modeling Techniques in Space Layout Planning
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 245-262
summary	This paper introduces the concept of responsive design. It elaborates this concept as an approach to free form, adaptable, automated design applying physically based modeling techniques to the design process. Our approach attempts to bridge the gap between totally automated design and the free form brainstorming designers normally employ. We do this by automating the initial placement and sizing of design elements, with an interactive engine that appears alive and highly responsive. We present a method for applying these techniques to architectural space layout planning, and preliminary implementation details for a prototype system for developing rectangular, two-dimensional, single- story floor plans.
keywords	Physically Based Space Layout, Physically Based Design, Responsive Design, Space Layout Planning, Computer-aided Design, Human-computer Interaction
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	c19d
authors	Camara, Antonio S. and Raper, Jonathan (Ed.)
year	1999
title	Spatial multimedia and virtual reality
source	London: Taylor & Francis
summary	The intersection of two disciplines and technologies which have become mature academic research topics in the 1990s was destined to be a dynamic area for collaboration and publication. However, until now no significant book-length treatment of the meeting of GIS and Virtual Reality has been available. This volume puts that situation to rights by bringing these together to cement some common understanding and principles in a potentially highly promising area for technological collaboration and cross-fertilisation. The result is a volume which ranges in subject matter from studies of a Virtual GIS Room to Spatial Agents, and from an Environmental Multimedia System to Computer-Assisted 3D Geographic Education. All the contributors are well-known international scientists, principally from the computational side of GIS. It will be a valuable resource for any GIS researcher or professional looking to understand the leading edge of this fertile field. ------------------------------------------------------------------------
series	other
last changed	2003/04/23 15:14

_id	9a1e
authors	Clayton, Mark J. and Vasquez de Velasco, Guillermo
year	1999
title	Stumbling, Backtracking, and Leapfrogging: Two Decades of Introductory Architectural Computing
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 151-158
doi	https://doi.org/10.52842/conf.ecaade.1999.151
summary	Our collective concept of computing and its relevance to architecture has undergone dramatic shifts in emphasis. A review of popular texts from the past reveals the biases and emphases that were current. In the seventies, architectural computing was generally seen as an elective for data processing specialists. In the early eighties, personal computers and commercial CAD systems were widely adopted. Architectural computing diverged from the "batch" world into the "interactive" world. As personal computing matured, introductory architectural computing courses turned away from a foundation in programming toward instruction in CAD software. By the late eighties, Graphic User Interfaces and windowing operating systems had appeared, leading to a profusion of architecturally relevant applications that needed to be addressed in introductory computing. The introduction of desktop 3D modeling in the early nineties led to increased emphasis upon rendering and animation. The past few years have added new emphases, particularly in the area of network communications, the World Wide Web and Virtual Design Studios. On the horizon are topics of electronic commerce and knowledge markets. This paper reviews these past and current trends and presents an outline for an introductory computing course that is relevant to the year 2000.
keywords	Computer-Aided Architectural Design, Computer-Aided Design, Computing Education, Introductory Courses
series	eCAADe
email
last changed	2022/06/07 07:56

_id	groot_ddssar0221
id	groot_ddssar0221
authors	De Groot, E.H.
year	1999
title	Integrated Lighting System Assistant
source	Eindhoven University of Technology
summary	The aim of the design project described in this thesis is to design a tool to support the building design process. Developing a design is considered to be a wicked problem because it goes beyond reasonable or predictable limits. Consequently, in this design project we address two wicked problems simultaneously: a double wicked problem. The two wicked problems concerned are the design of Design Decision Support System [DDSS] and the conceptual design of office lighting systems. To get a handle on the first wicked problem, two workshops were organised to meet the possible future users and to create a common basis for the tool to be developed. To tackle the wickedness of the second problem, an office lighting model and performance evaluation method were developed and implemented in a new prototype computer system: Integrated Lighting System Assistant [ILSA]. The workshops have proven to be a good source of feedback and an essential link to daily practice. The ILSA prototype shows that it is possible to implement the lighting model and evaluation method into a working prototype that can support architects in making decisions for the early design stage in the field of integrating daylight and artificial lighting.
series	thesis:PhD
more	http://www.bwk.tue.nl/fago/AIO/ellie/
last changed	2003/12/16 07:16

_id	fd35
authors	Donath, Dirk
year	1999
title	Using Immersive Virtual Reality Systems for Spatial Design in Architecture
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 307-318
summary	In the very young discipline of Virtual Reality Applications only a few reports are available about using this technology for periods longer than in experimental setups. This paper describes experiences made during four years of usage of Virtual Reality (VR) in educational training for architects. About 100 different people were working with our systems during this period. Two programs were developed at Bauhaus University with the aim of teaching students in architecture in three-dimensional sketching. An other program for free and own interfaces and environments is currently under construction and will be presented at the international computer fair "CeBit" in 1999. The first program called voxDesign is based on the metaphor of voxels. The second program, planeDesign, uses rectangualar planes to describe room-like situations. All programs force the users to design in a 1:1 scale, which means that the design and the feedback actions are coupled in an embodied way. A real walking metaphor is used for navigation. The experiences made by the students are explained too.
keywords	Virtual Reality, Architecture, Design, Design Support Systems, Interaction, Research, Education, Usability, Human Computer Interfaces
series	AVOCAAD
email
last changed	2005/09/09 10:48

For more results click below: