Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 629

Reformat results as: short short into frame detailed detailed into frame

_id	37c2
authors	Ahmad Rafi, M.E.
year	1999
title	Visualisation of Design Using Animation for Virtual Prototyping
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 519-525
doi	https://doi.org/10.52842/conf.ecaade.1999.519
summary	Although recent technology in time-based representation has vastly improved, animation in virtual prototype design field remains the same. Some designers invest a huge amount of money in the latest visualisation and multimedia technology and yet may create even worse animation. They often cramp sequences resulting in many viewers failing to interpret the design positively as they miss a lot of vital information that explains the design. This paper basically reports the importance of film-making understanding for producing good virtual prototype animation. It will be based on a part of a research project on the use of time-based media in architectural practices. It also includes an empirical analysis of several architectural-based documentary films (including an interview with the film director) and past and present computer animation. This paper then concludes with recommendations of good techniques for making animated visualisation relative to the stage at which the animation is produced for better design decision.
keywords	Virtual Prototype, Animation, Time-Based, Film-Making
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6480
authors	Asanowicz, Aleksander
year	1999
title	Computer in Creation of Architectural Form
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999,pp. 131-142
summary	This paper considers graphic methods of presentation of ideas 'in the creation of architectural forms' and evolution of these methods, determined by the implementations of information technology. Drawings have been the main medium of expression since Leonardo da Vinci to the present-day. Graphic communication has always been treated as a main design tool, both - at the ending stage of design and at the early design stage. Implementation of computers in design doe not change this situation. The entire design process proceeds in a traditional way. While searching for the idea we use hand sketches and, after this, technical drawings are draught on a plotter, which replaces a drawing pen. Using computers at the early design stages encounters serious difficulties. The main thesis of this paper is that hardware and software inadequacy is not the problem, the problem is in the inadequacy of the design methods. This problem is to be reconceived as what a person can do with a program, rather than what is the capacity of a program. Contemporary computer techniques allow us to put an equation mark between the searching for idea, visualisation and its realisation in virtual space. This paper presents Sketching by scanning - an experimental method of using computer hardware and software for stimulating of searching of architectural's form.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	4fa1
authors	Lee, E., Ida, Y., Woo, S. and Sasada, T.
year	1999
title	Environmental Design Using Fractals in Computer Graphics
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 533-538
doi	https://doi.org/10.52842/conf.ecaade.1999.533
summary	Computer graphics have developed efficient techniques for visualisation of the real world. Many of the algorithms have a physical basis, such as computational models for the light and the shadow, models of real objects (buildings, mountains, roads and so on) and the simulation of natural phenomenon. Now computer graphics techniques provide the virtual world with a perception of three dimensions. The concept of the virtual world and its technology have been expanding and intensifying in recent years. Almost everything in the real world has been simulated in virtual world. When it comes to a terrain model, what we need is labour and time. But now it is possible to simulate terrain like the real world using fractals in computer graphics with a very small program and small data set. This study aims to show how to build a real world impression in the virtual world. In this paper the authors suggest a landscape design method and show the results of its application.
keywords	Fractals, Polygon-Reduction, Computer Graphics, Virtual World, Collaboration
series	eCAADe
last changed	2022/06/07 07:51

_id	5c4a
authors	Smith, A.
year	1999
title	CVDS - Towards A Collaborative Virtual Design Studio
source	Habitat 7, Spring
summary	A Collaborative Virtual Design Studio (CVDS), accessible via the World Wide Web, is being developed by Online Planning at the Centre for Advanced Spatial Analysis, University College London. The CVDS is a result of research into the visualisation of urban form using Internet based communications. The visualisation of urban form is central to the design process, involving parties as wide ranging as Architects, Town Planners and Urban Designers to special interest groups and the general public.
series	other
last changed	2003/04/23 15:50

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	90dc
authors	Chen, C.
year	1999
title	Information Visualisation and Virtual Environments
source	Springer
summary	Information Visualisation is a fast growing research field and an industry with tremendous potential. Virtual environments provide a unique medium for people to communicate and interact over computer networks. Information Visualisation and Virtual Environments links the two areas together and presents the latest research and development, highlighting the potential of information visualisation as an enabling technology in the design of new generations of virtual environments. This book will be an invaluable source of reference for courses in Information Visualisation, User Interface Design, Virtual Environments, HCI, and Information Retrieval, as well as being a useful resource for consultants and practitioners. The book contains 144 wonderful colour images of intriguing and influential works in information visualisation.
series	other
last changed	2003/04/23 15:14

_id	9b63
authors	De Mesa, A., Quilez, J. and Regot, J.
year	1999
title	Sunlight Energy Graphic and Analytic Control in 3D Modelling
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 733-738
doi	https://doi.org/10.52842/conf.ecaade.1999.733
summary	Linking solar positions with architecture is a traditional idea, but the use of graphical tools to control sunlight in urban surroundings or buildings is relatively recent. A three-dimensional working environment like the computer offers a new dimension to verify the relationships between the sun and the architecture. This paper shows a new way to calculate the incidence of solar energy in architectural environments using computer 3D modelling. The addition of virtual space visualisation to the analytic computation brings a new tool that simplifies the technical study of sunlight. We have developed several programs based upon the three-dimensional construction of the solar vault and the obstructing objects for a defined position. The first one draws the solar vault for a defined range of dates according to latitude, that is the basis of the energetic calculation. The second program computes the obstruction, i.e. the solar regions that are obstructed by any object. Finally, the third one, allow us to define an orientation to compute the energy that arrives to the analysed positioning. The last program returns the result of calculation in several ways: it shows the amount of energy through colours and makes a list of solar hours according to its energy.
keywords	Sunlight, Energy, 3D modelling
series	eCAADe
last changed	2022/06/07 07:56

_id	3940
authors	Hall, Rick
year	1999
title	Realtime 3D visual Analysis of Very Large Models at Low Cost
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 437-441
doi	https://doi.org/10.52842/conf.ecaade.1999.437
summary	Computer based visualisation of 3D models in architecture has been possible for 20 years or more, and the software technology has steadily improved during this time so that now incredibly realistic images can be generated from any viewpoint in a model, and impressive fly through sequences can bring a model to life in ways previously not possible. Virtual reality is with us and multi-media enables us to present a finished design in increasingly seductive ways. However, these forms of output from a 3D model offer much more limited benefits during the design process and particularly on large complex models because they are so computing intensive and it often require many hours to produce just one image. Anything other than a small and relatively simple model cannot be viewed dynamically in real-time on a desktop PC of the type commonly used by architects in a design office. Until now the solution to this problem has meant investing in expensive design review hardware and software with its inherent need for trained, skilled labour. As a result, design review products are often viewed as a luxury or costly necessity.
keywords	Visual Analysis, Low Cost, 3D Modelling
series	eCAADe
last changed	2022/06/07 07:50

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
doi	https://doi.org/10.52842/conf.ecaade.1999.169
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	e719
authors	Achten, Henri and Turksma, Arthur
year	1999
title	Virtual Reality in Early Design: the Design Studio Experiences
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 327-335
summary	The Design Systems group of the Eindhoven University of Technology started a new kind of design studio teaching. With the use of high-end equipment, students use Virtual Reality from the very start of the design process. Virtual Reality technology up to now was primarily used for giving presentations. We use the same technology in the design process itself by means of reducing the time span in which one gets results in Virtual Reality. The method is based on a very brief cycle of modelling in AutoCAD, assigning materials in 3DStudio Viz, and then making a walkthrough in Virtual Reality in a standard landscape. Due to this cycle, which takes about 15 seconds, the student gets immediate feedback on design decisions which facilitates evaluation of the design in three dimensions much faster than usual. Usually the learning curve of this kind of software is quite steep, but with the use of templates the number of required steps to achieve results is reduced significantly. In this way, the potential of Virtual Reality is not only explored in research projects, but also in education. This paper discusses the general set-up of the design studio and shows how, via short workshops, students acquire knowledge of the cycle in a short time. The paper focuses on the added value of using Virtual Reality technology in this manner: improved spatial reasoning, translation from two-dimensional to three-dimensional representations, and VR feedback on design decisions. It discusses the needs for new design representations in this design environment, and shows how fast feedback in Virtual Reality can improve the spatial design at an early stage of the design process.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	6d88
authors	Achten, Henri H. and Van Leeuwen, Jos P.
year	1999
title	Feature-Based High Level Design Tools - A Classification
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 275-290
summary	The VR-DIS project aims to provide design support in the early design stage using a Virtual Reality environment. The initial brief of the design system is based on an analysis of a design case. The paper describes the process of analysis and extraction of design knowledge and design concepts in terms of Features. It is demonstrated how the analysis has lead to a classification of design concepts. This classification forms one of the main specifications for the VR-based design aid system that is being developed in the VR-DIS programme. The paper concludes by discussing the particular approach used in the case analysis and discusses future work in the VR-DIS research programme.
keywords	Features, Feature-Based modelling, Architectural Design, Design Process, Design Support
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	4d95
authors	Alvarado, Rodrigo Garcia and Maver, Tom
year	1999
title	Virtual Reality in Architectural Education: Defining Possibilities
source	ACADIA Quarterly, vol. 18, no. 4, pp. 7-9
doi	https://doi.org/10.52842/conf.acadia.1999.007
summary	Introduction: virtual reality in architecture Virtual Reality (VR) is an emergent computer technology for full 3D-simulations, which has a natural application in the architectural work, due that activity involves the complete definition of buildings prior to its construction. Although the profession has a long tradition and expertise in the use of 2D-plans for the design of buildings, the increasing complexity of projects and social participation requires better media of representation. However, the technological promise of Virtual Reality involves many sophisticated software and hardware developments. It is based on techniques of 3D-modelling currently incorporated in the majority of drawing software used in architecture, and also there are several tools for rendering, animation and panoramic views, which provide visual realism. But other capabilities like interactivity and sense of immersion are still complex, expensive and under research. These require stereoscopic helmets, 3D pointers and trackers with complicated configurations and uncomfortable use. Most advanced installations of Virtual-Reality like CAVEs involve much hardware, building space and restrictions for users. Nevertheless, diverse developers are working in Virtual-Reality user-friendly techniques and there are many initial experiences of architectural walk-throughs showing advantages in the communication and development of designs. Then we may expect an increasing use of Virtual Reality in architecture.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ga9926
id	ga9926
authors	Antonini, Riccardo
year	1999
title	Let's Improvise Together
source	International Conference on Generative Art
summary	The creators of ‘Let's-Improvise-Together’ adhere to the idea that while there is a multitude of online games now available in cyberspace, it appears that relatively few are focused on providing a positive, friendly and productive experience for the user. Producing this kind of experience is one the goals of our Amusement Project.To this end, the creation of ‘Let's Improvise Together’ has been guided by dedication to the importance of three themes:* the importance of cooperation,* the importance of creativity, and* the importance of emotion.Description of the GameThe avatar arrives in a certain area where there are many sound-blocks/objects. Or he may add sound "property" to existing ones. He can add new objects at will. Each object may represents a different sound, they do not have to though. The avatar walks around and chooses which objects he likes. Makes copies of these and add sounds or change the sounds on existing ones, then with all of the sound-blocks combined make his personalized "instrument". Now any player can make sounds on the instrument by approaching or bumping into a sound-block. The way that the avatar makes sounds on the instrument can vary. At the end of the improvising session, the ‘composition’ will be saved on the instrument site, along with the personalized instrument. In this way, each user of the Amusement Center will leave behind him a unique instrumental creation, that others who visit the Center later will be able to play on and listen to. The fully creative experience of making a new instrument can be obtained connecting to Active Worlds world ‘Amuse’ and ‘Amuse2’.Animated colorful sounding objects can be assembled by the user in the Virtual Environment as a sort of sounding instrument. We refrain here deliberately from using the word musical instrument, because the level of control we have on the sound in terms of rythm and melody, among other parameters, is very limited. It resembles instead, very closely, to the primitive instruments used by humans in some civilizations or to the experience made by children making sound out of ordinary objects. The dimension of cooperation is of paramount importance in the process of building and using the virtual sounding instrument. The instrument can be built on ones own effort but preferably by a team of cooperating users. The cooperation has as an important corolary: the sharing of the experience. The shared experience finds its permanence in the collective memory of the sounding instruments built. The sounding instrument can be seen also as a virtual sculpture, indeed this sculpture is a multimedial one. The objects have properties that ranges from video animation to sound to virtual physical properties like solidity. The role of the user representation in the Virtual World, called avatar, is important because it conveys, among other things, the user’s emotions. It is worth pointing out that the Avatar has no emotions on its own but it simply expresses the emotions of the user behind it. In a way it could be considered a sort of actor performing the script that the user gives it in real-time while playing.The other important element of the integration is related to the memory of the experience left by the user into the Virtual World. The new layout is explored and experienced. The layout is a permanent editable memory. The generative aspects of Let's improvise together are the following.The multi-media virtual sculpture left behind any participating avatar is not the creation of a single author/artist. The outcome of the sinergic interaction of various authors is not deterministic, nor predictable. The authors can indeed use generative algorythm in order to create the texture to be used on the objects. Usually, in our experience, the visitors of the Amuse worlds use shareware programs in order to generate their texture. In most cases the shareware programs are simple fractals generators. In principle, it is possible to generate also the shape of the object in a generative way. Taking into account the usual audience of our world, we expected visitors to use very simple algorythm that could generate shapes as .rwx files. Indeed, noone has attempted to do so insofar. As far as the music is concerned, the availability of shareware programs that allow simple generation of sounds sequences has made possible, for some users, to generate sounds sequences to be put in our world. In conclusion, the Let's improvise section of the Amuse worlds could be open for experimentation on generative art as a very simple entry point platform. We will be very happy to help anybody that for educational purposes would try to use our platform in order to create and exhibit generative forms of art.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	7436
authors	Barría Chateau, H., Muñoz Viveros, C. and Cerda Brintrup, G.
year	1999
title	Virtual Tour Through Modern Architecture in Conception
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 475-477
summary	This paper describes the development of a project that was selected and sponsoured by the Regional Competition FONDART 1998 (Funds for the Development of Arts of the Regional Secretary of Education) that follows the aim of cultural diffusion. Towards the middle of the 30s, the city of Concepción developed an architecture distinctly colonial, neoclassical and eclectic. An earthquake in 1939 abruptly interrupted this scene, destroying the enterity of its most important buildings. The reconstruction of the city followed the manifestoes of Modern Architecture, consolidating the urban importance of buildings such us the Law Courts, the Railway Station and the Regional Government, that emerged as the new architectural and cultural heritage of the city. The project consisted on the modeling of eleven buildings of the modern architectural heritage, and on the generation of 42 virtual tours through the buildings that were finally edited on a 16' video. This video allows the spectator to make a virtual tour through the original modern heritage of the city, nowadays demolished, altered, and sometimes, even forgotten. This project pretends to widen the ways of comprehension of our cultural identity by using computer modelling and animation as a tool for the conservation of the architectural heritage; and creating a record that can be used as a reference and as an instrument of cultural difussion.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	e531
authors	Berk, Michael
year	1999
title	CYBERjack
source	ACADIA Quarterly, vol. 18, no. 4, p. 10
doi	https://doi.org/10.52842/conf.acadia.1999.x.i8o
summary	Using a limited "kit of parts" [two 8 ft. 2x4's and one sheet of 1/2" birch plywood] students in teams of two are to design and construct an "interface" which joins the physical world to the virtual world of the web. The location for this piece of furniture [the CYBERjack] will be a local library in Okolona, Mississippi, where existing web computers are to be housed. The students modeled the design using formZ, then plotted full-size templates to be used in cutting the actual parts out of wood in the shop. The device was supposed to join the Body to the Machine. The project lasted 2 weeks and was part of a 4th year studio which participated in the ACADIA Library Competition last year.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	aef9
id	aef9
authors	Brown, A., Knight, M. and Berridge, P. (Eds.)
year	1999
title	Architectural Computing from Turing to 2000 [Conference Proceedings]
source	eCAADe Conference Proceedings / ISBN 0-9523687-5-7 / Liverpool (UK) 15-17 September 1999, 773 p.
doi	https://doi.org/10.52842/conf.ecaade.1999
summary	The core theme of this book is the idea of looking forward to where research and development in Computer Aided Architectural Design might be heading. The contention is that we can do so most effectively by using the developments that have taken place over the past three or four decades in Computing and Architectural Computing as our reference point; the past informing the future. The genesis of this theme is the fact that a new millennium is about to arrive. If we are ruthlessly objective the year 2000 holds no more significance than any other year; perhaps we should, instead, be preparing for the year 2048 (2k). In fact, whatever the justification, it is now timely to review where we stand in terms of the development of Architectural Computing. This book aims to do that. It is salutary to look back at what writers and researchers have said in the past about where they thought that the developments in computing were taking us. One of the common themes picked up in the sections of this book is the developments that have been spawned by the global linkup that the worldwide web offers us. In the past decade the scale and application of this new medium of communication has grown at a remarkable rate. There are few technological developments that have become so ubiquitous, so quickly. As a consequence there are particular sections in this book on Communication and the Virtual Design Studio which reflect the prominence of this new area, but examples of its application are scattered throughout the book. In 'Computer-Aided Architectural Design' (1977), Bill Mitchell did suggest that computer network accessibility from expensive centralised locations to affordable common, decentralised computing facilities would become more commonplace. But most pundits have been taken by surprise by just how powerful the explosive cocktail of networks, email and hypertext has proven to be. Each of the ingredients is interesting in its own right but together they have presented us with genuinely new ways of working. Perhaps, with foresight we can see what the next new explosive cocktail might be.
series	eCAADe
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	b78f
authors	Clayton, M.J., Warden, Robert B., Parker, Th.W.
year	1999
title	Virtual Construction of Architecture Using 3D CAD and Simulation
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 316-324
doi	https://doi.org/10.52842/conf.acadia.1999.316
summary	3D modeling and computer simulations provide new ways for architecture students to study the relationship between the design and construction of buildings. Digital media help to integrate and expand the content of courses in drafting, construction and design. This paper describes computer-based exercises that intensify the students’ experience of construction in several courses from sophomore to senior level. The courses integrate content from drafting and design communication, construction, CAD, and design. Several techniques are used to strengthen students’ awareness and ability in construction. These include: · Virtual design - build projects in which students construct 3D CAD models that include all elements that are used in construction. · Virtual office in which several students must collaborate under the supervision of a student acting as project architect to create a 3D CAD model and design development documents. · Virtual sub-contracting in which each student builds a trade specific 3D CAD model of a building and all of the trade specific models must be combined into a single model. · Construction simulations (4D CAD) in which students build 3D CAD models showing all components and then animate them to illustrate the assembly process. · Cost estimating using spreadsheets. These techniques are applied and reapplied at several points in the curriculum in both technical laboratory courses and design studios. This paper compares virtual construction methods to physical design – build projects and provides our pedagogical arguments for the use of digital media for understanding construction.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	9a1e
authors	Clayton, Mark J. and Vasquez de Velasco, Guillermo
year	1999
title	Stumbling, Backtracking, and Leapfrogging: Two Decades of Introductory Architectural Computing
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 151-158
doi	https://doi.org/10.52842/conf.ecaade.1999.151
summary	Our collective concept of computing and its relevance to architecture has undergone dramatic shifts in emphasis. A review of popular texts from the past reveals the biases and emphases that were current. In the seventies, architectural computing was generally seen as an elective for data processing specialists. In the early eighties, personal computers and commercial CAD systems were widely adopted. Architectural computing diverged from the "batch" world into the "interactive" world. As personal computing matured, introductory architectural computing courses turned away from a foundation in programming toward instruction in CAD software. By the late eighties, Graphic User Interfaces and windowing operating systems had appeared, leading to a profusion of architecturally relevant applications that needed to be addressed in introductory computing. The introduction of desktop 3D modeling in the early nineties led to increased emphasis upon rendering and animation. The past few years have added new emphases, particularly in the area of network communications, the World Wide Web and Virtual Design Studios. On the horizon are topics of electronic commerce and knowledge markets. This paper reviews these past and current trends and presents an outline for an introductory computing course that is relevant to the year 2000.
keywords	Computer-Aided Architectural Design, Computer-Aided Design, Computing Education, Introductory Courses
series	eCAADe
email
last changed	2022/06/07 07:56

_id	2524
authors	Corrao, R. and Fulantelli, G.
year	1999
title	The Web to Support Creative Design in Architecture
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 275-283
summary	The use of the web in a didactic context appears to be extremely meaningful and effective. In Architecture, the web has huge potential: among others, it has the ability to gather an enormous amount of information, and the ability to create an active learning environment, one which affords the learner opportunities to engage and think. The paper reports on a Web Based Instruction (WBI) system developed at the Italian National Research Council -Institute for Educational and Training Technologies- to support design activities for students of the Italian Faculty of Architecture and Civil Engineering. Original features of the system allow students to study and design in an effective way. Specifically, a particular set of "virtual stationery items" has been implemented and integrated in the system to help students, enrolled on on-line courses, to mimic important traditional study activities, still gaining all the advantages of using the Web. These tools are integrated with communication tools in the same learning environment. A very important feature of the WBI system is that authorised users can enrich the information network in the system, by adding new pages and new links. In the paper we report on the structure of the system, with particular focus on the information domain. Some of the "working tools" which allow users to simulate traditional study activities and the hypertext extension mechanism are also described.
series	AVOCAAD
last changed	2005/09/09 10:48

For more results click below: