Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 626

Reformat results as: short short into frame detailed detailed into frame

_id	5cba
authors	Anders, Peter
year	1999
title	Beyond Y2k: A Look at Acadia's Present and Future
doi	https://doi.org/10.52842/conf.acadia.1999.x.o3r
source	ACADIA Quarterly, vol. 18, no. 1, p. 10
summary	The sky may not be falling, but it sure is getting closer. Where will you when the last three zeros of our millennial odometer click into place? Computer scientists tell us that Y2K will bring the world’s computer infrastructure to its knees. Maybe, maybe not. But it is interesting that Y2K is an issue at all. Speculating on the future is simultaneously a magnifying glass for examining our technologies and a looking glass for what we become through them. "The future" is nothing new. Orwell's vision of totalitarian mass media did come true, if only as Madison Avenue rather than Big Brother. Futureboosters of the '50s were convinced that each garage would house a private airplane by the year 2000. But world citizens of the 60's and 70's feared a nuclear catastrophe that would replace the earth with a smoking crater. Others - perhaps more optimistically -predicted that computers were going to drive all our activities by the year 2000. And, in fact, theymay not be far off... The year 2000 is symbolic marker, a point of reflection and assessment. And - as this date is approaching rapidly - this may be a good time to come to grips with who we are and where we want to be.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	7dcd
authors	Cotton B. and Oliver, R.
year	1999
title	Understanding Hypermedia
source	Phaidon Press Ltd, London
summary	Understanding Hypermedia 2,000 is a wonderful read. It takes you on a journey tracing the origins of hypermedia from its very early beginings way back in the 1700's with the birth of print, all the way through to the modern new media revolution. It charts the developments in technology, culture, science and the arts to give you a very broad understanding of just what hypermedia is and where it came from. Looking to the future, Understanding Hypermedia looks at the components of hypermedia - interface design, typography, text, animation, video, vrml, etc -, the processes of designing and building new media projects - including examples from the web, cdrom and kiosks - and the future of the medium. From the hypermedia innovators to the visionaries of cyberspace. This book is a wonderful, rich and fasinating source of information and inspiration for anyone interested in or working with new media today.
series	other
last changed	2003/04/23 15:14

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	411c
authors	Ataman, Osman and Bermúdez (Ed.)
year	1999
title	Media and Design Process [Conference Proceedings]
doi	https://doi.org/10.52842/conf.acadia.1999
source	ACADIA ‘99 Proceedings / ISBN 1-880250-08-X / Salt Lake City 29-31 October 1999, 353 p.
summary	Throughout known architectural history, representation, media and design have been recognized to have a close relationship. This relationship is inseparable; representation being a means for engaging in design thinking and making and this activity requiring media. Interpretations as to what exactly this relationship is or means have been subject to debate, disagreement and change along the ages. Whereas much has been said about the interactions between representation and design, little has been elaborated on the relationship between media and design. Perhaps, it is not until now, surrounded by all kinds of media at the turn of the millennium, as Johnson argues (1997), that we have enough context to be able to see and address the relationship between media and human activities with some degree of perspective.
series	ACADIA
email
more	http://www.acadia.org
last changed	2022/06/07 07:49

_id	f288
authors	Bille, Pia
year	1999
title	Integrating GIS and Electronic Networks In Urban Design and Planning
doi	https://doi.org/10.52842/conf.ecaade.1999.722
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
summary	In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords	Urban Planning, Electronic Collaboration, GIS, Data Bases
series	eCAADe
email
last changed	2022/06/07 07:54

_id	aef9
id	aef9
authors	Brown, A., Knight, M. and Berridge, P. (Eds.)
year	1999
title	Architectural Computing from Turing to 2000 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.ecaade.1999
source	eCAADe Conference Proceedings / ISBN 0-9523687-5-7 / Liverpool (UK) 15-17 September 1999, 773 p.
summary	The core theme of this book is the idea of looking forward to where research and development in Computer Aided Architectural Design might be heading. The contention is that we can do so most effectively by using the developments that have taken place over the past three or four decades in Computing and Architectural Computing as our reference point; the past informing the future. The genesis of this theme is the fact that a new millennium is about to arrive. If we are ruthlessly objective the year 2000 holds no more significance than any other year; perhaps we should, instead, be preparing for the year 2048 (2k). In fact, whatever the justification, it is now timely to review where we stand in terms of the development of Architectural Computing. This book aims to do that. It is salutary to look back at what writers and researchers have said in the past about where they thought that the developments in computing were taking us. One of the common themes picked up in the sections of this book is the developments that have been spawned by the global linkup that the worldwide web offers us. In the past decade the scale and application of this new medium of communication has grown at a remarkable rate. There are few technological developments that have become so ubiquitous, so quickly. As a consequence there are particular sections in this book on Communication and the Virtual Design Studio which reflect the prominence of this new area, but examples of its application are scattered throughout the book. In 'Computer-Aided Architectural Design' (1977), Bill Mitchell did suggest that computer network accessibility from expensive centralised locations to affordable common, decentralised computing facilities would become more commonplace. But most pundits have been taken by surprise by just how powerful the explosive cocktail of networks, email and hypertext has proven to be. Each of the ingredients is interesting in its own right but together they have presented us with genuinely new ways of working. Perhaps, with foresight we can see what the next new explosive cocktail might be.
series	eCAADe
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	1206
authors	Cabezas, M., Mariano, C., Mitolo, S. and Oliva, S.
year	1999
title	Transformaciones en el Proceso Enseñanza-Aprendizaje de la Geometría Descriptiva con la Apliacación de los Medios Digitales (Transformations in the Teaching/Learning Process of Descriptive Geometry with the Aplplication of Digital Media)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 347-348
summary	The insert of the digital technologies in the atmosphere Áulico has left generalizing in a significant way. An example constitutes it the high percentage of students that they manifested general knowledge in the software handling in the introductory course of visual communication, as well as the voluntary presentation of practical works developed with digital means. The necessity of an answer to the requirements that arise of the students sinks to the certainty of a pedagogic compatibility among the matter to try and the teaching attended by the personal computer that would increase the Iconidad and the understanding of a topic of certain complexity like it is the geometry of the space. An educational program designed for the teaching of the Sistema Monge whose general characteristics were presented in the II Ibero-American Seminar of Digital Graph and that it will be applied as experience pilot in the course 2000, it will allow us to respond to the following queries: what place it will be given to the educational program in the formation process in connection with the other pedagogic means.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	3db8
authors	Clarke, Keith
year	1999
title	Getting Started with GIS
source	2nd ed., Prentice Hall Series in Geographic Information Science, ed. Kieth Clarke. Upper Saddle River, NJ: Prentice Hall, 1999, 2-3
summary	This best-selling non-technical, reader-friendly introduction to GIS makes the complexity of this rapidly growing high-tech field accessible to beginners. It uses a "learn-by-seeing" approach that features clear, simple explanations, an abundance of illustrations and photos, and generic practice labs for use with any GIS software. What Is a GIS? GIS's Roots in Cartography. Maps as Numbers. Getting the Map into the Computer. What Is Where? Why Is It There? Making Maps with GIS. How to Pick a GIS. GIS in Action. The Future of GIS. For anyone interested in a hands-on introduction to Geographic Information Systems.
series	other
last changed	2003/04/23 15:14

_id	37d1
authors	Corona Martíne, Alfonso and Vigo, Libertad
year	1999
title	Before the Digital Design Studio
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 247-252
summary	This paper contains some observations which derive from our work as Studio Professors . In the last years, studios are in a transition phase with the progressive introduction of computers in later stages of the design process. The initiative generally belongs to students rather than to studio masters, since the former are aware that a knowledge of CAD systems will make them able to get work in architects offices. It is the first few Studios that will guide the student in forming a conception of what is architecture . Therefore, we have observer more attentively the way in which he establishes his first competence as a designer. We believe it is useful to clarify design training before we can integrate computers into it. The ways we all learn to design and which we transmit in the Studio were obviously created a long time ago, when Architecture became a subject taught in Schools, no longer a craft to be acquired under a master. The conception of architecture that the student forms in his mind is largely dependent on a long tradition of Beaux-Arts training which survives (under different forms) in Modern Architecture. The methods he or she acquires will become the basis of his creative design process also in professional life. Computer programmes are designed to adapt into the stages of this design process simply as time saving tools. We are interested in finding out how they can become an active part in the creative process and how to control this integration in teaching. Therefore, our work deals mainly with the tradition of the Studio and the conditioning it produces. The next step will be to explore the possiblities and restrictions that will inevitably issue from the introduction of new media.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	3ddc
authors	Dijkstra, Jan and Timmermans, Harry
year	1999
title	Towards a Multi-Agent Model for Visualizing Simulated User Behavior to Support the Assessment of Design Performance
doi	https://doi.org/10.52842/conf.acadia.1999.226
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 226-237
summary	We introduce the outline of a multi-agent model that can be used for visualizing simulated user behavior to support the assessment of design performance. We will consider various performance indicators of building environments, which are related to user reaction to design decisions. This system may serve as a media tool in the design process for a better understanding of what the design will look like, especially for those cases where design or planning decisions will affect the behavior of individuals. The system is based on cellular automata and multi-agent simulation technology. The system simulates how agents move around in a particular 3D (or 2D) environment, in which space is represented as a lattice of cells. Agents represent objects or people with their own behavior, moving over the network. Each agent will be located in a simulated space, based on the cellular automata grid. Each iteration of the simulation is based on a parallel update of the agents conforming local rules. Agents positioned within an environment will need sensors to perceive their local neighborhood and some means with which to affect the environment. In this way, autonomous individuals and the interaction between them can be simulated by the system. As a result, designers can use the system to assess the likely consequences of their design decisions on user behavior. We think that the system provides a potentially valuable tool to support design and decision-making processes, related to user behavior in architecture and urban planning.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ga9916
id	ga9916
authors	Elzenga, R. Neal and Pontecorvo, Michael S.
year	1999
title	Arties: Meta-Design as Evolving Colonies of Artistic Agents
source	International Conference on Generative Art
summary	Meta-design, the act of designing a system or species of design instead of a design instance, is an important concept in modern design practice and in the generative design paradigm. For meta-design to be a useful tool, the designer must have more formal support for both design species definition/expression and the abstract attributes which the designer is attempting to embody within a design. Arties is an exploration of one possible avenue for supporting meta-design. Arties is an artistic system emphasizing the co-evolution of colonies of Artificial Life design or artistic agents (called arties) and the environment they inhabit. Generative design systems have concentrated on biological genetics metaphors where a population of design instances are evolved directly from a set of ‘parent’ designs in a succession of generations. In Arties, the a-life agent which is evolved, produces the design instance as a byproduct of interacting with its environment. Arties utilize an attraction potential curve as their primary dynamic. They sense the relative attraction of entities in their environment, using multiple sensory channels. Arties then associate an attractiveness score to each entity. This attractiveness score is combined with a 'taste' function built into the artie that is sensitized to that observation channel, entity, and distance by a transfer function. Arties use this attraction to guide decisions and behaviors. A community of arties, with independent evolving attraction criteria can pass collective judgement on each point in an art space. As the Artie moves within this space it modifies the environment in reaction to what it senses. Arties support for Meta-design is in (A) the process of evolving arties, breeding their attraction potential curve parameters using a genetic algorithm and (B) their use of sensory channels to support abstract attributes geometries. Adjustment of these parameters tunes the attraction of the artie along various sensing channels. The multi-agent co-evolution of Arties is one approach to creating a system for supporting meta-design. Arties is part of an on-going exploration of how to support meta-design in computer augmented design systems. Our future work with Arties-like systems will be concerned with applications in areas such as modeling adaptive directives in Architecture, Object Structure Design, spatio-temporal behaviors design (for games and simulations), virtual ambient spaces, and representation and computation of abstract design attributes.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ecaade2012_045
id	ecaade2012_045
authors	Langenhan, Christoph ; Seifert, Arne ; Teichert, Astrid ; Petzold, Frank
year	2012
title	ar:searchbox - Knowledge management for architecture students
doi	https://doi.org/10.52842/conf.ecaade.2012.1.639
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 639-645.
wos	WOS:000330322400067
summary	As media-orientation and access to media becomes increasingly widespread in society, so too is the availability of architectural designs on the internet. In most cases these are published in the form of raster images of plans, elevations and perspective drawings together with written descriptions on architecture databases and platforms such as archINFORM or nextroom, as well as on the homepages of the respective architecture offi ces. Knowledge is generally regarded as useful information. However, the literature does not elaborate clear differentiations between what is knowledge, and what is information and data. In our view it is the preparation of information in data structures that makes it useful as knowledge. Knowledge management systems are therefore intelligent information systems in which knowledge is presented and made useful through representation and modelling methods (Abeckerand Decker, 1999).
keywords	Knowledge management; ontology; information retrieval
series	eCAADe
email
last changed	2022/06/07 07:52

_id	473d
authors	Maver, Tom and Petric, Jelena
year	1999
title	Virtual Heritage: Is There a Future for the Past?
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 482-487
summary	This paper attempts an overview of the contribution which emerging information technologies - viz CAD, Multimedia, Virtual Reality and the Internet - can make to the presentation, understanding and preservation of the rich architectural heritage which exists (pro-term) in almost every cultural context. In the UK, the growing interest in sites such as Stonehenge has, through the threat of greater physical presence, increasingly kept the public at bay - a curious paradox which Virtual Reality (VR) has the potential to address. Virtual Reality (-an overly used and underly understood term-) is an information technology which can provide a convincing experience of environments which: i) exist, but are too remote, costly or hazardous, to visit. ii) don't yet exist but are planned, such as architectural designs or urban plans. iii) never will exist, other than in the imagination. iv) existed in the past and are now threatened or already lost. // This paper has its focus on the latter category, i.e. what is now becoming known as Virtual Heritage (VH), but it puts VH in the context of the broader spectrum of simulated experiences of past, present and future environments of cultural significance. The paper draws largely on the work of ABACUS, the Architecture and Building Aids Computer Unit, Strathclyde. The examples of the application of IT to VH include: i) a virtual reality experience of Historic Scotland's premier historical site: Skara Brae, the most complete neolithic settlement in Northern Europe. ii) a multimedia CD-ROM featuring some 50 of the most wonderful interiors of Glasgow's architectural treasures. iii) a computer based archive of rare and normally inaccessible 17C and 18C drawings of Scottish buildings from three seminal sources. iv) a massive 3-D model of Glasgow (some 10,000 buildings located on the hilly terrain of the city), which is now accessible on the Internet. // The paper concludes with conjectures based on the examples given of how emerging information technologies can help secure a future for the past.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	2e50
authors	Ozersay, Fevzi and Szalapaj, Peter
year	1999
title	Theorising a Sustainable Computer Aided Architectural Education Model
doi	https://doi.org/10.52842/conf.ecaade.1999.186
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 186-195
summary	The dogmatic structure of architectural education has meant that the production and application of new educational theories, leading to educational models that use computer technology as their central medium of education, is still a relatively under-explored area. Partial models cannot deliver the expected bigger steps, but only bits and pieces. Curricula developments, at many schools of architecture, have been carried out within the closed circuit manner of architectural education, through expanding the traditional curricula and integrating computers into them. There is still no agreed curriculum in schools of architecture, which defines, at least conceptually, the use of computers within it. Do we really know what we are doing? In the words of Aart Bijl; 'If I want to know what I am doing, I need a separate description of my doing it, a theory' [Bijl, 1989]. The word 'sustainability' is defined as understanding the past and responding to the present with concern for the future. Applying this definition to architectural education, this paper aims to outline the necessity and the principles for the construction of a theory of a sustainable computer aided architectural education model, which could lead to an architectural education that is lasting.
keywords	Architectural Education, Educational Theories, Computers, Sustainable Models
series	eCAADe
email
last changed	2022/06/07 08:00

_id	396e
authors	Pereyra, N., Azubel, R., Torroja, A., López Coronel, J.P. and Muñoz, P.
year	1999
title	Do Intelligent Objects Need Programmed Users?
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 52-55
summary	Intelligent objects for daily use offer greater advantages than electromechanical products. However, they need a user whose life is more methodical, programmed and predictable. As de number of services offered in such products increase, their restrictions in their flexibility of use arise. Finally, users adapt themselves to habits that these objects suggest (for better) or prescribe (for worse). However, a paradox exists. What is controversial for a standard user: the increasing passivity justified in the eternal pursuit of comfort, for a disabled person means achieving independence and autonomy. In order to accomplish the revolutionary equity that computer science claims, the possibility of being excluded for economic reasons should not exist. If not, it will increase the fracture between coexistent realities in the same territory. For these reasons, assuming the risk of being considered naive and idealist, we believe that in order to build a better future it is necessary to promote policies that guarantee the access to new technologies for people with low economic means. Together with the consciousness users gain -related to product selection-, it would break the premature discouragement that the markets try to impose, resigning us to an unjustified idea of weakness and submission.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	a4e9
authors	Petrovic, Igor and Svetel, Igor
year	1999
title	From Number Cruncher to Digital Being: The Changing Role of Computer in CAAD
doi	https://doi.org/10.52842/conf.ecaade.1999.033
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 33-39
summary	The paper reflects on a thirteen-year period of CAAD research and development by a small group of researchers and practitioners. Starting with simple algorithmic drafting programmes, the work transcended to expert systems and distributed artificial intelligence, using computers as tools. The research cycle is about to begin afresh; computers in the next century shall not be detached entities but the extensions of man. The computer shall be the medium that will enable a designer to be what he/she really is. This future has already begun.
keywords	History of CAAD, CAAD Design Paradigms, CAADfuture
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ga0026
id	ga0026
authors	Ransen, Owen F.
year	2000
title	Possible Futures in Computer Art Generation
source	International Conference on Generative Art
summary	Years of trying to create an "Image Idea Generator" program have convinced me that the perfect solution would be to have an artificial artistic person, a design slave. This paper describes how I came to that conclusion, realistic alternatives, and briefly, how it could possibly happen. 1. The history of Repligator and Gliftic 1.1 Repligator In 1996 I had the idea of creating an “image idea generator”. I wanted something which would create images out of nothing, but guided by the user. The biggest conceptual problem I had was “out of nothing”. What does that mean? So I put aside that problem and forced the user to give the program a starting image. This program eventually turned into Repligator, commercially described as an “easy to use graphical effects program”, but actually, to my mind, an Image Idea Generator. The first release came out in October 1997. In December 1998 I described Repligator V4 [1] and how I thought it could be developed away from simply being an effects program. In July 1999 Repligator V4 won the Shareware Industry Awards Foundation prize for "Best Graphics Program of 1999". Prize winners are never told why they won, but I am sure that it was because of two things: 1) Easy of use 2) Ease of experimentation "Ease of experimentation" means that Repligator does in fact come up with new graphics ideas. Once you have input your original image you can generate new versions of that image simply by pushing a single key. Repligator is currently at version 6, but, apart from adding many new effects and a few new features, is basically the same program as version 4. Following on from the ideas in [1] I started to develop Gliftic, which is closer to my original thoughts of an image idea generator which "starts from nothing". The Gliftic model of images was that they are composed of three components: 1. Layout or form, for example the outline of a mandala is a form. 2. Color scheme, for example colors selected from autumn leaves from an oak tree. 3. Interpretation, for example Van Gogh would paint a mandala with oak tree colors in a different way to Andy Warhol. There is a Van Gogh interpretation and an Andy Warhol interpretation. Further I wanted to be able to genetically breed images, for example crossing two layouts to produce a child layout. And the same with interpretations and color schemes. If I could achieve this then the program would be very powerful. 1.2 Getting to Gliftic Programming has an amazing way of crystalising ideas. If you want to put an idea into practice via a computer program you really have to understand the idea not only globally, but just as importantly, in detail. You have to make hard design decisions, there can be no vagueness, and so implementing what I had decribed above turned out to be a considerable challenge. I soon found out that the hardest thing to do would be the breeding of forms. What are the "genes" of a form? What are the genes of a circle, say, and how do they compare to the genes of the outline of the UK? I wanted the genotype representation (inside the computer program's data) to be directly linked to the phenotype representation (on the computer screen). This seemed to be the best way of making sure that bred-forms would bare some visual relationship to their parents. I also wanted symmetry to be preserved. For example if two symmetrical objects were bred then their children should be symmetrical. I decided to represent shapes as simply closed polygonal shapes, and the "genes" of these shapes were simply the list of points defining the polygon. Thus a circle would have to be represented by a regular polygon of, say, 100 sides. The outline of the UK could easily be represented as a list of points every 10 Kilometers along the coast line. Now for the important question: what do you get when you cross a circle with the outline of the UK? I tried various ways of combining the "genes" (i.e. coordinates) of the shapes, but none of them really ended up producing interesting shapes. And of the methods I used, many of them, applied over several "generations" simply resulted in amorphous blobs, with no distinct family characteristics. Or rather maybe I should say that no single method of breeding shapes gave decent results for all types of images. Figure 1 shows an example of breeding a mandala with 6 regular polygons: Figure 1 Mandala bred with array of regular polygons I did not try out all my ideas, and maybe in the future I will return to the problem, but it was clear to me that it is a non-trivial problem. And if the breeding of shapes is a non-trivial problem, then what about the breeding of interpretations? I abandoned the genetic (breeding) model of generating designs but retained the idea of the three components (form, color scheme, interpretation). 1.3 Gliftic today Gliftic Version 1.0 was released in May 2000. It allows the user to change a form, a color scheme and an interpretation. The user can experiment with combining different components together and can thus home in on an personally pleasing image. Just as in Repligator, pushing the F7 key make the program choose all the options. Unlike Repligator however the user can also easily experiment with the form (only) by pushing F4, the color scheme (only) by pushing F5 and the interpretation (only) by pushing F6. Figures 2, 3 and 4 show some example images created by Gliftic. Figure 2 Mandala interpreted with arabesques Figure 3 Trellis interpreted with "graphic ivy" Figure 4 Regular dots interpreted as "sparks" 1.4 Forms in Gliftic V1 Forms are simply collections of graphics primitives (points, lines, ellipses and polygons). The program generates these collections according to the user's instructions. Currently the forms are: Mandala, Regular Polygon, Random Dots, Random Sticks, Random Shapes, Grid Of Polygons, Trellis, Flying Leap, Sticks And Waves, Spoked Wheel, Biological Growth, Chequer Squares, Regular Dots, Single Line, Paisley, Random Circles, Chevrons. 1.5 Color Schemes in Gliftic V1 When combining a form with an interpretation (described later) the program needs to know what colors it can use. The range of colors is called a color scheme. Gliftic has three color scheme types: 1. Random colors: Colors for the various parts of the image are chosen purely at random. 2. Hue Saturation Value (HSV) colors: The user can choose the main hue (e.g. red or yellow), the saturation (purity) of the color scheme and the value (brightness/darkness) . The user also has to choose how much variation is allowed in the color scheme. A wide variation allows the various colors of the final image to depart a long way from the HSV settings. A smaller variation results in the final image using almost a single color. 3. Colors chosen from an image: The user can choose an image (for example a JPG file of a famous painting, or a digital photograph he took while on holiday in Greece) and Gliftic will select colors from that image. Only colors from the selected image will appear in the output image. 1.6 Interpretations in Gliftic V1 Interpretation in Gliftic is best decribed with a few examples. A pure geometric line could be interpreted as: 1) the branch of a tree 2) a long thin arabesque 3) a sequence of disks 4) a chain, 5) a row of diamonds. An pure geometric ellipse could be interpreted as 1) a lake, 2) a planet, 3) an eye. Gliftic V1 has the following interpretations: Standard, Circles, Flying Leap, Graphic Ivy, Diamond Bar, Sparkz, Ess Disk, Ribbons, George Haite, Arabesque, ZigZag. 1.7 Applications of Gliftic Currently Gliftic is mostly used for creating WEB graphics, often backgrounds as it has an option to enable "tiling" of the generated images. There is also a possibility that it will be used in the custom textile business sometime within the next year or two. The real application of Gliftic is that of generating new graphics ideas, and I suspect that, like Repligator, many users will only understand this later. 2. The future of Gliftic, 3 possibilties Completing Gliftic V1 gave me the experience to understand what problems and opportunities there will be in future development of the program. Here I divide my many ideas into three oversimplified possibilities, and the real result may be a mix of two or all three of them. 2.1 Continue the current development "linearly" Gliftic could grow simply by the addition of more forms and interpretations. In fact I am sure that initially it will grow like this. However this limits the possibilities to what is inside the program itself. These limits can be mitigated by allowing the user to add forms (as vector files). The user can already add color schemes (as images). The biggest problem with leaving the program in its current state is that there is no easy way to add interpretations. 2.2 Allow the artist to program Gliftic It would be interesting to add a language to Gliftic which allows the user to program his own form generators and interpreters. In this way Gliftic becomes a "platform" for the development of dynamic graphics styles by the artist. The advantage of not having to deal with the complexities of Windows programming could attract the more adventurous artists and designers. The choice of programming language of course needs to take into account the fact that the "programmer" is probably not be an expert computer scientist. I have seen how LISP (an not exactly easy artificial intelligence language) has become very popular among non programming users of AutoCAD. If, to complete a job which you do manually and repeatedly, you can write a LISP macro of only 5 lines, then you may be tempted to learn enough LISP to write those 5 lines. Imagine also the ability to publish (and/or sell) "style generators". An artist could develop a particular interpretation function, it creates images of a given character which others find appealing. The interpretation (which runs inside Gliftic as a routine) could be offered to interior designers (for example) to unify carpets, wallpaper, furniture coverings for single projects. As Adrian Ward [3] says on his WEB site: "Programming is no less an artform than painting is a technical process." Learning a computer language to create a single image is overkill and impractical. Learning a computer language to create your own artistic style which generates an infinite series of images in that style may well be attractive. 2.3 Add an artificial conciousness to Gliftic This is a wild science fiction idea which comes into my head regularly. Gliftic manages to surprise the users with the images it makes, but, currently, is limited by what gets programmed into it or by pure chance. How about adding a real artifical conciousness to the program? Creating an intelligent artificial designer? According to Igor Aleksander [1] conciousness is required for programs (computers) to really become usefully intelligent. Aleksander thinks that "the line has been drawn under the philosophical discussion of conciousness, and the way is open to sound scientific investigation". Without going into the details, and with great over-simplification, there are roughly two sorts of artificial intelligence: 1) Programmed intelligence, where, to all intents and purposes, the programmer is the "intelligence". The program may perform well (but often, in practice, doesn't) and any learning which is done is simply statistical and pre-programmed. There is no way that this type of program could become concious. 2) Neural network intelligence, where the programs are based roughly on a simple model of the brain, and the network learns how to do specific tasks. It is this sort of program which, according to Aleksander, could, in the future, become concious, and thus usefully intelligent. What could the advantages of an artificial artist be? 1) There would be no need for programming. Presumbably the human artist would dialog with the artificial artist, directing its development. 2) The artificial artist could be used as an apprentice, doing the "drudge" work of art, which needs intelligence, but is, anyway, monotonous for the human artist. 3) The human artist imagines "concepts", the artificial artist makes them concrete. 4) An concious artificial artist may come up with ideas of its own. Is this science fiction? Arthur C. Clarke's 1st Law: "If a famous scientist says that something can be done, then he is in all probability correct. If a famous scientist says that something cannot be done, then he is in all probability wrong". Arthur C Clarke's 2nd Law: "Only by trying to go beyond the current limits can you find out what the real limits are." One of Bertrand Russell's 10 commandments: "Do not fear to be eccentric in opinion, for every opinion now accepted was once eccentric" 3. References 1. "From Ramon Llull to Image Idea Generation". Ransen, Owen. Proceedings of the 1998 Milan First International Conference on Generative Art. 2. "How To Build A Mind" Aleksander, Igor. Wiedenfeld and Nicolson, 1999 3. "How I Drew One of My Pictures: or, The Authorship of Generative Art" by Adrian Ward and Geof Cox. Proceedings of the 1999 Milan 2nd International Conference on Generative Art.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	f6d5
authors	Song, Y., Clayton, M.J. and Johnson, R.E.
year	1999
title	Anticipating Reuse: Documenting Buildings for Operations Using Web Technology
doi	https://doi.org/10.52842/conf.acadia.1999.054
source	Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 54-65
summary	This research explores the feasibility of Web technology as a means for delivering building information to better support facility operations. Our research proposes just-in-time (JIT) facility documentation as a pragmatic solution to the limitations of current as-built documents, allowing more effective reuse of building information. Our investigation addresses four issues: 1) what building information is needed for facility operations; 2) how the design and construction team can improve the format for delivering the building information to facility operators; 3) how current Web technology can store and deliver facility information in support of operations; 4) what is the mechanism of documenting building information using the Web technology. // We surveyed literature, interviewed members of design and operations teams and reviewed current initiatives of industry and software vendors to identify problems with current practices. We also surveyed promising Web technologies and conducted experiments to determine how these technologies could help to solve the problems. We constructed a conceptual framework of JIT facility documentation as a solution to current information fragmentation problems. We developed a prototype of the JIT document system to demonstrate a “proof of concept” by using current Web technologies such as Autodesk’s DWF, Microsoft’s Active Server Pages, VB and Java script, and Access database to develop the prototype system. By dynamically composing HTML pages in response to task-specific requests, our prototype enables easy access and integration of a variety of building information to support facility operations.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	c056
authors	Tsou, Jin-Yeu and Chow, Benny
year	1999
title	Team Orientated Knowledge Construction for Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1999.292
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 292-300
summary	Information Technology is always more accessible when we trying to imagine what the IT could be actually used. This situation is even more noticeable in the architecture field, and there are various technologies that have failed on delivering urgent needed education quality. Meanwhile, the tradition architecture education is evolving rapidly under the concepts of problem-based approach, knowledge reconstruction, and self-guided learning. "Education without institutional boundary" happens everyday in the classroom, and multi-direction learning modes have replaced the traditional single-direction teaching approach. The role of IT in the curriculum of architectural design education has become a subject of debate, scrutiny and experimentation in architectural schools. This paper will first outline the theory of applying team-oriented knowledge construction approach into studio teaching, the setup of our integrated digital design media environment is introduced; organization issue regarding the team formation and studio coordination is discussed; case studies are illustrated for demonstrating the methodology applied; and the student feedback is summarized to analysis the effectiveness of the approach.
keywords	Multimedia, CD-ROM, Problem-Based Learning, Team-Orientated Learning, Constructivist Learning
series	eCAADe
email
last changed	2022/06/07 07:57

For more results click below: