CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 626

_id 504a
authors Rodrigo Alvarado, García
year 1999
title Design-Based on VR-Modeling of Environemntal Conditions
source III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 126-129
summary The research on CAD has been looking for a long time a creative contribution to architectural design, including recently the use of virtual-reality as an immersive modeling system, but without much practical results. However, contemporary architecture is increasingly including digital characteristics based more on cultural influences than on the use of electronic tools. This shows an evolution of the discipline in relation to digital media and apparently distant from environmental concerns. But the works and reflexions reveal a common convergence in the role of body in architecture as a pivot between virtual and local dimension of design. Based on that relationship we propose to take advantage of virtual-reality for modeling environmental conditions of the location in order to guide architectural design, using for example the potential of representing characteristics not visible in reality or to simulate time cycles. Sun displacement, wind direction, temperature ranges, topography and landscape are specific conditions in design that define energy consumption and human comfort. Such characteristics can establish optimal shapes crossing the different variables with timelines. VR-modeling and interactive control allow an spatial evaluation of environmentally efficient forms. That is showed through an exercise of housing in different locations of Chile. This merger between digital media and ecological concerns represents a crossing of contemporary cultural trends to motivate exploration of new geometries, supported on the potential of technology and on sustainable human development
series SIGRADI
email
last changed 2016/03/10 09:59

_id 2fe1
authors Arroyo, Julio and Chiarella, Mauro
year 1999
title Infographic: Its Incorporation and Relativity in Architectural Design Process
source III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 313-318
summary This paper is about an architectural design workshop regularly held at a public university in Santa Fe, Argentina. The class is about 150 students large, with different informatic capabilities and hardware facilities. The design problem of the workshop, which is one year long, is the relationship between architectural project and the construction of the urbanity. This implies both a physical intervention and a cultural expression. Pedagogy seeks students to overcome individualism, characteristic that is hardly induced by PCs, making a socialized design experience. A complementary and simultaneous use of graphic and infographic data is one of the main criteria of the workshop. The idea is to look for students to reach a wide vision by means of the use of different representation systems and means of information. Digital graphic is introduced early in the design process as an electronic model of urban context. It is considered as a one among many other graphic resources and is used together with ordinary models, geometric drawings, aerial and regular photography and hand made sketches. This paper relates the results that have been obtained when students were asked to make an analytic and sensitive approach to the relationship site - urban situation. This relationship has a great importance for the workshop since its goal is to make students to understand the the value of designing in and for the city.
series SIGRADI
email
last changed 2016/03/10 09:47

_id e15c
authors Bartenbach, Christian and Witting, Walter
year 1999
title VDU WORK IN DIFFERENT LIGHTING CONDITIONS
source Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 7-28
summary In order to avoid the disadvantages of purely subjective methods in a technical evaluation of daylight and artificial light systems, the Bartenbach LichtLabor developed new test methods which can determine objectively and quantitatively the visual or psycho-physiological stress connected with VDU work [1], depending on different lighting conditions. Daylight and artificial lighting systems were tested with these methods and compared by using the performances achieved by the test subjects. Some highly significant differences in performance done under the individual lighting systems became apparent and demonstrated that the visual stress or the physical or physiological fatigue from an ergonomic viewpoint depends largely on the lighting conditions at the workplace. This holds true for daylight systems (glare protection, re-directing lamellae, clear window as a control condition) as well as for purely artificial lighting systems where especially the choice of color temperature of the light and the used control gear (conventional or electronic) determine the resulting performance. Optimized lighting also positively affects the productivity and economicy for the design of workplaces that take the human factor into account.
keywords VDU, Optimized Lighting, Performance Test, Lighting System, Model Simulation, Real Environments
series other
type normal paper
more http://info.tuwien.ac.at/efa
last changed 2004/05/04 11:27

_id 328d
authors Bassanino, May Nahab and Brown, Andre
year 1999
title Computer Generated Architectural Images: A Comparative Study
doi https://doi.org/10.52842/conf.ecaade.1999.552
source Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 552-556
summary This work is part of a long term research programme (Brown and Horton, 1992; Brown and Nahab, 1996; Bassanino, 1999) in which tests and studies have been carried out on various groups of people to investigate their reaction to, and interpretation of different forms of architectural representation. In the work described here a range of architectural schemes were presented using particular representational techniques and media. An experiment was then undertaken on two different groups; architects and lay people. They were presented with a number of schemes displayed using the various techniques and media. The responses are summarised and some comments are made on the effect of computers on perceiving architecture and on communicating architectural ideas arising from an analysis of the responses.
keywords Subject, Image Type, Presentation Technique, Medium, SD Scales, Factors
series eCAADe
email
last changed 2022/06/07 07:54

_id ga0021
id ga0021
authors Eacott, John
year 2000
title Generative music composition in practice - a critical evaluation
source International Conference on Generative Art
summary This critical evaluation will discuss 4 computer based musical works which, for reasons I shall explain, I describe as non-linear or generative. The works have been constructed by me and publicly performed or exhibited during a two year period from October 1998 to October 2000. ‘In the beginning…’ interactive music installation, strangeAttraction, Morley Gallery, London. July 1999 ‘jnrtv’ live generative dance music May 1999 to Dec 2000 ‘jazz’ interactive music installation, another strangeAttraction Morley Gallery, London. July 2000-09-26 ‘the street’ architectural interactive music installation, University of Westminster Oct 2000 Introduction I have always loved the practice of composing, particularly when it means scoring a work to be played by a live ensemble. There is something about taking a fresh sheet of manuscript , ruling the bar lines, adding clefs, key and time signatures and beginning the gradual process of adding notes, one at a time to the score until it is complete that is gratifying and compensates for the enormous effort involved. The process of scoring however is actually one distinct act within the more general task of creating music. Recently, the notion of ‘composing’ has met challenges through an increased interest in non-linear compositional methods. It is actually the presence of Chaotic or uncontrolable elements which add real beauty to music and many if not all of the things we value. If we think of a sunset, waves lapping on the shore, plants, trees a human face and the sound of the human voice, these things are not perfect and more importantly perhaps, they are transient, constantly changing and evolving. Last year and again this year, I have organised an exhibition of interactive , non-linear music installations called 'strangeAttraction'. The title refers to what Edward Lorenz called a ‘strange attractor’ the phenomenon that despite vast degrees of Chaos and uncertainty within a system, there is a degree of predictability, the tendency for chaotic behaviour to ‘attract’ towards a probable set of outcomes. Composition that deals with 'attractors' or probable outcomes rather than specific details which are set in stone is an increasingly intriguing notion.
series other
more http://www.generativeart.com/
last changed 2003/08/07 17:25

_id 0e56
authors Gero, John S. and Shi, Xiao-Guang
year 1999
title Design Development Based on an Analogy with Developmental Biology
doi https://doi.org/10.52842/conf.caadria.1999.253
source CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 253-264
summary This paper introduces the commonality between diversity in the biological world and diversity in artifact design. It proposes a computational model of design development based on the analogy with the phenomena and principles of developmental biology. The model is feature based and is capable of varying design in logic, geometry, attribute and phase. Examples demonstrate this biological analogy and its benefits for design development.
series CAADRIA
email
last changed 2022/06/07 07:51

_id 9088
authors Hartkopf, V. and Loftness, V.
year 1999
title Global relevance of total building performance
source Automation in Construction 8 (4) (1999) pp. 377-393
summary Global population and environmental trends demand a radical departure from current building and developmental processes. Applying total building performance thinking can reduce energy consumption, pollution and waste in existing and new construction by a factor of 4 and simultaneously can improve quality of life within buildings––measured through occupant satisfaction, health and productivity. The further development of advanced energy and water systems, and the application of appropriate technology and systems integration concepts will help to enable the elimination of `waste-streams', avoiding obsolescence, as well as managing industrial and agricultural nutrient streams. Instead of treating buildings and their contents as `pre-garbage', worse `pre toxic-waste', all material flows can be considered within life cycles for `cradle to cradle' use. These concepts can make major contributions towards the creation of more sustainable lifestyles with even greater quality in the industrialized countries and the development and implementation of sustainable urban and building infrastructures in rapidly emerging economies. Rather than the continued export of non-sustainable building solutions, this paper argues for the development and demonstration of such practices in the industrialized countries that would create a progressive 'pull' to enable the appropriate implementation of new practices.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:22

_id 83b5
authors Heylighen, Ann and Neuckermans, Herman
year 2000
title Time, equipment and encouragement - Travel requisites for the World-Wide Wanderstudent
source G. Van der Perre and P. Vandevelde (eds.), The Wanderstudent 2000: The Wanderstudent of 1425 revived in virtual reality in 2000? Towards a European Virtual University, Proceedings of the International Colloquium organised by EuroPACE at the Katholieke Universiteit Leuven, Leuven, Belgium, on October 20-21, 2000 Leuven University Press, Leuven (Belgium), 2000 (ISBN 90 5867 156 9), pp. 133-136
summary In Winter/Spring 1999, DYNAMO - a Web-based design assistant for student architects - received its baptism of fire in a 4th year design studio at our department. The paper describes the setting and procedure of the baptism, the participation of the studio teaching staff, and the students' reactions and appreciation. Based on students' responses to a questionnaire and observations of the tool in use, we investigated whether DYNAMO succeeded in engaging students and what factors stimulated/hampered this engagement. Although students were noticeably enthusiastic about the tool, three factors revealed themselves as major obstacles to student engagement: lack of time, of encouragement by the teachers and of studio equipment. The paper concludes with lessons learned for the future of DYNAMO and, more in general, of ICT in education.
series journal paper
email
last changed 2002/11/14 08:38

_id e978
authors [Zupancic] Strojan, Tadeja Z.
year 1999
title CyberUniversity
doi https://doi.org/10.52842/conf.ecaade.1999.196
source Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 196-200
summary The study of a cyberuniversity derives from an analogy between real urban space and its virtual "substitution". It represents an attempt to balance some views, which seems to be contrary, exclusive, but they are just parts of the same wholeness. Especially the notion of a cyber society is lately considered such an exaggeration, that it is possible to forget the meaning of a real life experience and interactions, which are already threatened. One should contribute to the awarness that is used in such a comparison, it is "just" an analogy, not a real similarity. At the same time it is possible to point out some limitations of a cyberspace and indicate a more realistic view of the meaning of cyber communities. Awarness of the development processes could help to find a balance between reality and virtuality, using cyberfacilities not to destroy us (our identity) but to improve the quality of our (real) life.
keywords University, Cyberuniversity, Space, Cyberspace
series eCAADe
type normal paper
email
last changed 2022/06/07 07:54

_id bacd
authors Abadí Abbo, Isaac
year 1999
title APPLICATION OF SPATIAL DESIGN ABILITY IN A POSTGRADUATE COURSE
source Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 75-82
summary Spatial Design Ability (SDA) has been defined by the author (1983) as the capacity to anticipate the effects (psychological impressions) that architectural spaces or its components produce in observers or users. This concept, which requires the evaluation of spaces by the people that uses it, was proposed as a guideline to a Masters Degree Course in Architectural Design at the Universidad Autonoma de Aguascalientes in Mexico. The theory and the exercises required for the experience needed a model that could simulate spaces in terms of all the variables involved. Full-scale modeling as has been tested in previous research, offered the most effective mean to experiment with space. A simple, primitive model was designed and built: an articulated ceiling that allows variation in height and shape, and a series of wooden panels for the walls and structure. Several exercises were carried out, mainly to experience cause -effect relationships between space and the psychological impressions they produce. Students researched into spatial taxonomy, intentional sequences of space and spatial character. Results showed that students achieved the expected anticipation of space and that full-scale modeling, even with a simple model, proved to be an effective tool for this purpose. The low cost of the model and the short time it took to be built, opens an important possibility for Institutions involved in architectural studies, both as a research and as a learning tool.
keywords Spatial Design Ability, Architectural Space, User Evaluation, Learning, Model Simulation, Real Environments
series other
type normal paper
email
more http://info.tuwien.ac.at/efa
last changed 2004/05/04 11:27

_id cf2011_p109
id cf2011_p109
authors Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year 2011
title Automated Cost Analysis of Concept Design BIM Models
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords building information modeling, interoperability, cost analysis, IFC
series CAAD Futures
email
last changed 2012/02/11 19:21

_id e336
authors Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year 1999
title Virtual Reality in the Design Studio: The Eindhoven Perspective
doi https://doi.org/10.52842/conf.ecaade.1999.169
source Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords Virtual Reality, Design Studio, Student Projects
series eCAADe
email
last changed 2022/06/07 07:54

_id e719
authors Achten, Henri and Turksma, Arthur
year 1999
title Virtual Reality in Early Design: the Design Studio Experiences
source AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 327-335
summary The Design Systems group of the Eindhoven University of Technology started a new kind of design studio teaching. With the use of high-end equipment, students use Virtual Reality from the very start of the design process. Virtual Reality technology up to now was primarily used for giving presentations. We use the same technology in the design process itself by means of reducing the time span in which one gets results in Virtual Reality. The method is based on a very brief cycle of modelling in AutoCAD, assigning materials in 3DStudio Viz, and then making a walkthrough in Virtual Reality in a standard landscape. Due to this cycle, which takes about 15 seconds, the student gets immediate feedback on design decisions which facilitates evaluation of the design in three dimensions much faster than usual. Usually the learning curve of this kind of software is quite steep, but with the use of templates the number of required steps to achieve results is reduced significantly. In this way, the potential of Virtual Reality is not only explored in research projects, but also in education. This paper discusses the general set-up of the design studio and shows how, via short workshops, students acquire knowledge of the cycle in a short time. The paper focuses on the added value of using Virtual Reality technology in this manner: improved spatial reasoning, translation from two-dimensional to three-dimensional representations, and VR feedback on design decisions. It discusses the needs for new design representations in this design environment, and shows how fast feedback in Virtual Reality can improve the spatial design at an early stage of the design process.
series AVOCAAD
email
last changed 2005/09/09 10:48

_id 6d88
authors Achten, Henri H. and Van Leeuwen, Jos P.
year 1999
title Feature-Based High Level Design Tools - A Classification
source Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 275-290
summary The VR-DIS project aims to provide design support in the early design stage using a Virtual Reality environment. The initial brief of the design system is based on an analysis of a design case. The paper describes the process of analysis and extraction of design knowledge and design concepts in terms of Features. It is demonstrated how the analysis has lead to a classification of design concepts. This classification forms one of the main specifications for the VR-based design aid system that is being developed in the VR-DIS programme. The paper concludes by discussing the particular approach used in the case analysis and discusses future work in the VR-DIS research programme.
keywords Features, Feature-Based modelling, Architectural Design, Design Process, Design Support
series CAAD Futures
email
last changed 2006/11/07 07:22

_id acadia21_530
id acadia21_530
authors Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year 2021
title Robotic Timber Construction
doi https://doi.org/10.52842/conf.acadia.2021.530
source ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series ACADIA
type project
email
last changed 2023/10/22 12:06

_id ae61
authors Af Klercker, Jonas
year 1999
title CAAD - Integrated with the First Steps into Architecture
doi https://doi.org/10.52842/conf.ecaade.1999.266
source Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 266-272
summary How and when should CAAD be introduced in the curriculum of the School of Architecture? This paper begins with some arguments for starting CAAD education at the very beginning. At the School of Architecture in Lund teachers in the first year courses have tried to integrate CAAD with the introduction to architectural concepts and techniques. Traditionally the first year is divided by several subjects running courses separatly without any contact for coordination. From the academic year 96/97 the teachers of Aplied aestetics, Building Science, Architectural design and CAAD have decided to colaborate as much as possible to make the role of our different fields as clear as possible to the students. Therefore integrating CAAD was a natural step in the academic year 98/99. The computer techniques were taught one step in advance so that the students can practise their understanding of the programs in their tasks in the other subjects. The results were surprisingly good! The students have quickly learned to mix the manual and computer techniques to make expressive and interesting visual presentations of their ideas. Some students with antipaty to computers have overcome this handicap. Some interesting observations are discussed.
keywords Curriculum, First Year Studies, Integration, CAAD, Modelling
series eCAADe
email
last changed 2022/06/07 07:54

_id 36d3
authors Af Klercker, Jonas
year 1999
title A CAVE-Interface in CAAD-Education?
doi https://doi.org/10.52842/conf.caadria.1999.313
source CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 313-323
summary The so called "CAVE-interface" is a very interesting and thrilling development for architects! It supports a better illusion of space by exposing almost a 270° view of a computer model than the 60° which can be viewed on an ordinary computer screen. At the Lund University we have got the possibility to experiment with a CAVE-installation, using it in research and the education of CAAD. The technique and three experiments are discribed. The possibilities are discussed and some problems and questions are put forward.
series CAADRIA
email
last changed 2022/06/07 07:54

_id 37c2
authors Ahmad Rafi, M.E.
year 1999
title Visualisation of Design Using Animation for Virtual Prototyping
doi https://doi.org/10.52842/conf.ecaade.1999.519
source Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 519-525
summary Although recent technology in time-based representation has vastly improved, animation in virtual prototype design field remains the same. Some designers invest a huge amount of money in the latest visualisation and multimedia technology and yet may create even worse animation. They often cramp sequences resulting in many viewers failing to interpret the design positively as they miss a lot of vital information that explains the design. This paper basically reports the importance of film-making understanding for producing good virtual prototype animation. It will be based on a part of a research project on the use of time-based media in architectural practices. It also includes an empirical analysis of several architectural-based documentary films (including an interview with the film director) and past and present computer animation. This paper then concludes with recommendations of good techniques for making animated visualisation relative to the stage at which the animation is produced for better design decision.
keywords Virtual Prototype, Animation, Time-Based, Film-Making
series eCAADe
email
last changed 2022/06/07 07:54

_id alqawasmi
id alqawasmi
authors Al-Qawasmi, J., Clayton, M.J., Tassinary, L.G. and Johnson, R..
year 1999
title Observations on Collaborative Design and Multimedia Usage in Virtual Design Studio
source J. Woosely and T. Adair (eds.), Learning virtually: Proceedings of the 6th annual distance education conference, San Antonio, Texas, pp. 1-9
summary The virtual design studio (VDS) points to a new way of practicing and teaching architectural design. As a new phenomenon, little research has been done to evaluate design collaboration and multimedia usage in a distributed workplace like the virtual design studio. Our research provides empirical data on how students actually use multiple media during architectural collaborative design.
series other
email
last changed 2003/12/06 09:55

_id 3cde
authors Alik, B.
year 1999
title A topology construction from line drawings using a uniform plane subdivision technique
source Computer-Aided Design, Vol. 31 (5) (1999) pp. 335-348
summary The paper describes an algorithm for constructing the topology from a set of line segments or polylines. The problem appears for example at land-maps that have been drawnby general-purpose drawing packages or captured from blue-prints by digitalisation. The solution comprises two steps; in the first step inconsistencies in the input data aredetected and removed, and in the second step the topology is constructed. The algorithm for topology construction consists of two phases: determination of a concave hull,and generation of polygons. It is shown that the running-time of the presented algorithm is better than O(n2), where n is the number of input points. Because of a largenumber of geometric elements being expected, the geometric search needed at the first step of the algorithm is speeded up by an acceleration techniquea uniform planesubdivision.
keywords Computational Geometry, Topology Construction, Uniform Space Subdivision
series journal paper
email
last changed 2003/05/15 21:33

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 31HOMELOGIN (you are user _anon_766060 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002