Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 621

Reformat results as: short short into frame detailed detailed into frame

_id	81f3
authors	Martens, Bob and Turk, Ziga
year	1999
title	Working Experiences with a Cumulative Index on CAD: "CUMINCAD"
doi	https://doi.org/10.52842/conf.ecaade.1999.327
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 327-333
summary	To researchers in every discipline, Internet is quickly becoming the dominating environment to do literature studies. Commercial bibliographic databases tend to be too general, are not up-to-date and require special skills and effort to be searched. On the other hand researchers also publish on the Web and collaboratively that can create indexes of relevant publications. CUMINCAD is a bibliographic index that compiles papers related to computer aided architectural design. Implemented with a database, it allows searching and browsing in the ways usual on the Web. It provides a "historical evolution" to learn from previous efforts and draws attention to older original works that could have been ignored because they could not be found on the Web otherwise. The authors believe that CUMINCAD will help focus future CAAD research and improve the education. CUMINCAD work started in 1998 and is available at www.fagg.uni-lj.si/cumincad/. This paper focusses on the design and development of the database and presents some ideas concerning its advanced use in the analysis of research efforts.
keywords	CAAD-related Publications, Web-based Bibliographic Database, Searchable Index, Retrospective CAAD Research
series	eCAADe
email
last changed	2022/06/07 07:59

_id	4d95
authors	Alvarado, Rodrigo Garcia and Maver, Tom
year	1999
title	Virtual Reality in Architectural Education: Defining Possibilities
doi	https://doi.org/10.52842/conf.acadia.1999.007
source	ACADIA Quarterly, vol. 18, no. 4, pp. 7-9
summary	Introduction: virtual reality in architecture Virtual Reality (VR) is an emergent computer technology for full 3D-simulations, which has a natural application in the architectural work, due that activity involves the complete definition of buildings prior to its construction. Although the profession has a long tradition and expertise in the use of 2D-plans for the design of buildings, the increasing complexity of projects and social participation requires better media of representation. However, the technological promise of Virtual Reality involves many sophisticated software and hardware developments. It is based on techniques of 3D-modelling currently incorporated in the majority of drawing software used in architecture, and also there are several tools for rendering, animation and panoramic views, which provide visual realism. But other capabilities like interactivity and sense of immersion are still complex, expensive and under research. These require stereoscopic helmets, 3D pointers and trackers with complicated configurations and uncomfortable use. Most advanced installations of Virtual-Reality like CAVEs involve much hardware, building space and restrictions for users. Nevertheless, diverse developers are working in Virtual-Reality user-friendly techniques and there are many initial experiences of architectural walk-throughs showing advantages in the communication and development of designs. Then we may expect an increasing use of Virtual Reality in architecture.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	22b7
authors	Donath, D. and Regenbrecht, H.
year	1999
title	Der Bleistift im 21. Jahrhundert. Das architektonische Entwerfen in interaktiven VR Umgebungen. (The pencil in the 21th century. The architectural design process in Virtual Environments)
source	IAO Forum Architektur im Informationszeitalter, FhG Stuttgart, 21.-22.4.1999, proceedings, chapter 7, 10 p.
summary	In the very young discipline of Virtual Reality Applications only a few reports are available about using this technology for periods longer than in experimental setups. This paper describes experiences made during five years of usage of Virtual Reality (VR) in educational training for architects. About 100 different people were working with our systems during this period. Three programs were developed at Bauhaus University with the aim of teaching architectural students to design in three-dimesional environments. The first program called voxDesign is based on the metaphor of voxels. The second program, planeDesign, uses rectangualar planes to describe room-like situations. An other program vram for the user orientated description of flexible and own interfaces and environments is current under construction, a first verson is presented at the international computer exhibition ìCeBitî in 1999. All programs force the users to design in a 1:1 scale, that means that the design and the feedback actions are coupled in an embodied way. A real walking metaphor is used for navigation. The experiences made by users are explained too.
keywords	Virtual Reality, Interaction, Human Computer Interfaces, Digital Media
series	other
email
last changed	2003/02/26 18:58

_id	fd35
authors	Donath, Dirk
year	1999
title	Using Immersive Virtual Reality Systems for Spatial Design in Architecture
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 307-318
summary	In the very young discipline of Virtual Reality Applications only a few reports are available about using this technology for periods longer than in experimental setups. This paper describes experiences made during four years of usage of Virtual Reality (VR) in educational training for architects. About 100 different people were working with our systems during this period. Two programs were developed at Bauhaus University with the aim of teaching students in architecture in three-dimensional sketching. An other program for free and own interfaces and environments is currently under construction and will be presented at the international computer fair "CeBit" in 1999. The first program called voxDesign is based on the metaphor of voxels. The second program, planeDesign, uses rectangualar planes to describe room-like situations. All programs force the users to design in a 1:1 scale, which means that the design and the feedback actions are coupled in an embodied way. A real walking metaphor is used for navigation. The experiences made by the students are explained too.
keywords	Virtual Reality, Architecture, Design, Design Support Systems, Interaction, Research, Education, Usability, Human Computer Interfaces
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	bd1e
authors	Evans, Barrie
year	1999
title	A Communicating Profession
doi	https://doi.org/10.52842/conf.ecaade.1999.313
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 313-320
summary	This paper discusses aspects of the near future, a future that in parts is already with us, a future that we need to attend to now. The focus is computer aided design, but not graphics-based CAD. Rather today's CAD innovation is focused on the use of smart communications to provide designers with an information-rich support environment and the design team with an infrastructure for co-operative working. Based on this picture of a different, emerging CAD, the paper finishes with a brief comment on educational implications. One is that the emerging commercial project information management software could prove useful as infrastructure for co-operative educational projects. Another is that there could be significant gaps in information content for educational users as education becomes more IT-based. Should providing this content be a role for joint ECAADE research and development projects?
keywords	Information, Smart Telecomms, CSCW, Learning, CAD
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2fc7
authors	Forber, U. and Russell, P.
year	1999
title	Interdisciplinary Collaboration in the Virtual Design Studio Design Studio
source	Proceedings of the 17th Annual EAAE Annual Conference, Plymouth UK
summary	Drastic changes in technology and economics currently impact common working structures. Moreover, a fundamental move of western societies from industrial and service oriented societies to information oriented societies can be observed. Like others, the AEC industry is also exposed to the challenge of these fundamental changes, not only regarding an ever growing stock of information on building components and materials, but also because of new methods of collaboration to be applied by all participants. As a result, integrating domain specific knowledge into the design process and conversely, conveying design intentions to domain experts, is meaningful in a constantly growing scale. Utilising advanced technology, a twofold approach in research and education, undertaken at the Institut für Industrielle Bauproduktion (ifib), University of Karlsruhe, is the basis of efforts to create and develop integrating methods of collaboration into the design and planning process. In addition, the integration of AEC practitioners (investors, users, designers, engineers) in the education process provides both drastic changes in the fields of design and construction education of students and a promising approach for life long learning. The focus of this paper is to present the current state of work and to report on experiences gathered during several Virtual Design Studios (VDS) in which multi-disciplinary participants from various Universities and backgrounds were involved. Platforms for the activities are World Wide Web based applications as well as animations, VR, CAD and video conferencing.
series	other
email
last changed	2003/04/23 15:50

_id	ga9928
id	ga9928
authors	Goulthorpe
year	1999
title	Hyposurface: from Autoplastic to Alloplastic Space
source	International Conference on Generative Art
summary	By way of immediate qualification to an essay which attempts to orient current technical developments in relation to a series of dECOi projects, I would suggest that the greatest liberation offered by new technology in architecture is not its formal potential as much as the patterns of creativity and practice it engenders. For increasingly in the projects presented here dECOi operates as an extended network of technical expertise: Mark Burry and his research team at Deakin University in Australia as architects and parametric/ programmatic designers; Peter Wood in New Zealand as programmer; Alex Scott in London as mathematician; Chris Glasow in London as systems engineer; and the engineers (structural/services) of David Glover’s team at Ove Arup in London. This reflects how we’re working in a new technical environment - a new form of practice, in a sense - a loose and light network which deploys highly specialist technical skill to suit a particular project. By way of a second disclaimer, I would suggest that the rapid technological development we're witnessing, which we struggle to comprehend given the sheer pace of change that overwhelms us, is somehow of a different order than previous technological revolutions. For the shift from an industrial society to a society of mass communication, which is the essential transformation taking place in the present, seems to be a subliminal and almost inexpressive technological transition - is formless, in a sense - which begs the question of how it may be expressed in form. If one holds that architecture is somehow the crystallization of cultural change in concrete form, one suspects that in the present there is no simple physical equivalent for the burst of communication technologies that colour contemporary life. But I think that one might effectively raise a series of questions apropos technology by briefly looking at 3 or 4 of our current projects, and which suggest a range of possibilities fostered by new technology. By way of a third doubt, we might qualify in advance the apparent optimism of architects for CAD technology by thinking back to Thomas More and his island ‘Utopia’, which marks in some way the advent of Modern rationalism. This was, if not quite a technological utopia, certainly a metaphysical one, More’s vision typically deductive, prognostic, causal. But which by the time of Francis Bacon’s New Atlantis is a technological utopia availing itself of all the possibilities put at humanity’s disposal by the known machines of the time. There’s a sort of implicit sanction within these two accounts which lies in their nature as reality optimized by rational DESIGN as if the very ethos of design were sponsored by Modern rationalist thought and its utopian leanings. The faintly euphoric ‘technological’ discourse of architecture at present - a sort of Neue Bauhaus - then seems curiously misplaced historically given the 20th century’s general anti-, dis-, or counter-utopian discourse. But even this seems to have finally run its course, dissolving into the electronic heterotopia of the present with its diverse opportunities of irony and distortion (as it’s been said) as a liberating potential.1 This would seem to mark the dissolution of design ethos into non-causal process(ing), which begs the question of ‘design’ itself: who 'designs' anymore? Or rather, has 'design' not become uncoupled from its rational, deterministic, tradition? The utopianism that attatches to technological discourse in the present seems blind to the counter-finality of technology's own accomplishments - that transparency has, as it were, by its own more and more perfect fulfillment, failed by its own success. For what we seem to have inherited is not the warped utopia depicted in countless visions of a singular and tyrranical technology (such as that in Orwell's 1984), but a rich and diverse heterotopia which has opened the possibility of countless channels of local dialect competing directly with the channels of power. Undoubtedly such multiplicitous and global connectivity has sent creative thought in multiple directions…
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	7b68
authors	Shounai, Y., Morozumi, M., Homma , R. and Murakami, Y.
year	1999
title	On the Development of Group Work CAD for Network PC: GW-CAD III
doi	https://doi.org/10.52842/conf.ecaade.1999.473
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 473-481
summary	The number of Virtual Design Studio experiments that use a Digital Pin-up Board (WWW) and video conferencing tools is rapidly increasing. As we see that several schools have introduced group-ware to support asynchronous communication of their projects, it is possible to regard that techniques for asynchronous communication have already been developed to some extent. However, participants of those projects still have difficulty with synchronous communication. For example, though designers often desire to exchange models among members to get critical feedback and achieve fast problem solving while working at their desks, there are few CADs that can support concurrent synchronous design communication among members. The first half of this paper discusses a model of synchronous design communication that uses CAD models, and then proposes a prototype of tools that use Microsoft NetMeeting and AutoCAD R14: GW-CAD III. In the middle, a user interface system that enables designers to conveniently model and exchange separate sets of models necessary to elaborate different aspects of design is proposed: "Network Clipboard" "Modeling Space", "Plan Face", and "Section Face". Finally, this paper discusses the results of several experiments that used the prototype.
keywords	Synchronous Collaboration, Internet, CAD, Prototype, Schematic Design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	473d
authors	Maver, Tom and Petric, Jelena
year	1999
title	Virtual Heritage: Is There a Future for the Past?
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 482-487
summary	This paper attempts an overview of the contribution which emerging information technologies - viz CAD, Multimedia, Virtual Reality and the Internet - can make to the presentation, understanding and preservation of the rich architectural heritage which exists (pro-term) in almost every cultural context. In the UK, the growing interest in sites such as Stonehenge has, through the threat of greater physical presence, increasingly kept the public at bay - a curious paradox which Virtual Reality (VR) has the potential to address. Virtual Reality (-an overly used and underly understood term-) is an information technology which can provide a convincing experience of environments which: i) exist, but are too remote, costly or hazardous, to visit. ii) don't yet exist but are planned, such as architectural designs or urban plans. iii) never will exist, other than in the imagination. iv) existed in the past and are now threatened or already lost. // This paper has its focus on the latter category, i.e. what is now becoming known as Virtual Heritage (VH), but it puts VH in the context of the broader spectrum of simulated experiences of past, present and future environments of cultural significance. The paper draws largely on the work of ABACUS, the Architecture and Building Aids Computer Unit, Strathclyde. The examples of the application of IT to VH include: i) a virtual reality experience of Historic Scotland's premier historical site: Skara Brae, the most complete neolithic settlement in Northern Europe. ii) a multimedia CD-ROM featuring some 50 of the most wonderful interiors of Glasgow's architectural treasures. iii) a computer based archive of rare and normally inaccessible 17C and 18C drawings of Scottish buildings from three seminal sources. iv) a massive 3-D model of Glasgow (some 10,000 buildings located on the hilly terrain of the city), which is now accessible on the Internet. // The paper concludes with conjectures based on the examples given of how emerging information technologies can help secure a future for the past.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	3815
authors	Qaqish, Ra’ed
year	2001
title	VDS/DDS Practice Hinges on Interventions and Simplicity - A Case Study of Hard Realism vs. Distorted Idealism
doi	https://doi.org/10.52842/conf.ecaade.2001.249
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 249-255
summary	This paper reports on a contemporary and laborious ongoing experimental work initiated during the establishment of a new Virtual/Digital design studio “VDS” in Sept. 1999 by CAAD tutors at University of Petra “UOP”. The new VDS/DDS now works as an experimental laboratory to explore several solutions to problems of efficiency in design teaching as a new digital design studio paradigm, in tandem with CAD/Design staff, DS environment, materials and facilities. Two groups of graduating level students participated as volunteers in this experiment. The first group was comprised of three fifth-year architectural design students while the second group was comprised of two fourth-year interior design students. The media currently in use are ArchiCAD 6.5 as a design tool along with CorelDraw 9 as a presentational tool, running on Pentium III computers. The series of experiments evaluated the impression on architectural design studio tuition requirements arising from the changes brought about by the implementation of the new CAD pedagogical approach (VDS/DDS) at UOP. The findings echo several important key issues in tandem with CAAD, such as: the changes brought about by the new design strategies, adaptation in problem solving decision-making techniques, studio employment in terms of environment, means and methods. Other issues are VDS/DDS integration schemes carried out by both students and staff as one team in design studio practice on one hand and the curriculum on the other. Finally, the paper discusses the negative impact of conventional design studio hardliner teaching advocates and students alike whose outlook and impressions undermine and deplete effective CAAD integration and obstruct, in many instances, the improvement of such experiments in a VDS environment.
keywords	Design Studio Strategies, Problem Solving Decisions, Transformation And Integration Policies
series	eCAADe
email
last changed	2022/06/07 08:00

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	f288
authors	Bille, Pia
year	1999
title	Integrating GIS and Electronic Networks In Urban Design and Planning
doi	https://doi.org/10.52842/conf.ecaade.1999.722
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
summary	In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords	Urban Planning, Electronic Collaboration, GIS, Data Bases
series	eCAADe
email
last changed	2022/06/07 07:54

_id	aef9
id	aef9
authors	Brown, A., Knight, M. and Berridge, P. (Eds.)
year	1999
title	Architectural Computing from Turing to 2000 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.ecaade.1999
source	eCAADe Conference Proceedings / ISBN 0-9523687-5-7 / Liverpool (UK) 15-17 September 1999, 773 p.
summary	The core theme of this book is the idea of looking forward to where research and development in Computer Aided Architectural Design might be heading. The contention is that we can do so most effectively by using the developments that have taken place over the past three or four decades in Computing and Architectural Computing as our reference point; the past informing the future. The genesis of this theme is the fact that a new millennium is about to arrive. If we are ruthlessly objective the year 2000 holds no more significance than any other year; perhaps we should, instead, be preparing for the year 2048 (2k). In fact, whatever the justification, it is now timely to review where we stand in terms of the development of Architectural Computing. This book aims to do that. It is salutary to look back at what writers and researchers have said in the past about where they thought that the developments in computing were taking us. One of the common themes picked up in the sections of this book is the developments that have been spawned by the global linkup that the worldwide web offers us. In the past decade the scale and application of this new medium of communication has grown at a remarkable rate. There are few technological developments that have become so ubiquitous, so quickly. As a consequence there are particular sections in this book on Communication and the Virtual Design Studio which reflect the prominence of this new area, but examples of its application are scattered throughout the book. In 'Computer-Aided Architectural Design' (1977), Bill Mitchell did suggest that computer network accessibility from expensive centralised locations to affordable common, decentralised computing facilities would become more commonplace. But most pundits have been taken by surprise by just how powerful the explosive cocktail of networks, email and hypertext has proven to be. Each of the ingredients is interesting in its own right but together they have presented us with genuinely new ways of working. Perhaps, with foresight we can see what the next new explosive cocktail might be.
series	eCAADe
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	f11d
authors	Brown, K. and Petersen, D.
year	1999
title	Ready-to-Run Java 3D
source	Wiley Computer Publishing
summary	Written for the intermediate Java programmer and Web site designer, Ready-to-Run Java 3D provides sample Java applets and code using Sun's new Java 3D API. This book provides a worthy jump-start for Java 3D that goes well beyond the documentation provided by Sun. Coverage includes downloading the Java 2 plug-in (needed by Java 3D) and basic Java 3D classes for storing shapes, matrices, and scenes. A listing of all Java 3D classes shows off its considerable richness. Generally, this book tries to cover basic 3D concepts and how they are implemented in Java 3D. (It assumes a certain knowledge of math, particularly with matrices, which are a staple of 3D graphics). Well-commented source code is printed throughout (though there is little additional commentary). An applet for orbiting planets provides an entertaining demonstration of transforming objects onscreen. You'll learn to add processing for fog effects and texture mapping and get material on 3D sound effects and several public domain tools for working with 3D artwork (including converting VRML [Virtual Reality Markup Language] files for use with Java 3D). In all, this book largely succeeds at being accessible for HTML designers while being useful to Java programmers. With Java 3D, Sun is betting that 3D graphics shouldn't require a degree in computer science. This book reflects that philosophy, though advanced Java developers will probably want more detail on this exciting new graphics package. --Richard Dragan Topics covered: Individual applets for morphing, translation, rotation, and scaling; support for light and transparency; adding motion and interaction to 3D objects (with Java 3D classes for behaviors and interpolators); and Java 3D classes used for event handling.
series	other
last changed	2003/04/23 15:14

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ga0020
id	ga0020
authors	Codignola, G.Matteo
year	2000
title	[Title missing]
source	International Conference on Generative Art
summary	This paper is a summary of my last degree in architecture (discussed in December 1999) with Prof. Celestino Soddu and Prof. Enrica Colabella. In this work I had the possibility to reach complexity by a generative approach with the construction of a paradigm that organizes the different codes of project identity. My general objective was to design shape complexity in variable categories : 3d space surfaces, 2d drawings and 2d textures. I was to discover the identity of one of my favourite architects of the 20th century : Antoni Gaudì, by constructing codes relative to shape complexity. I defined my particular objective in the possibility to abduct from Gaudì's imaginary reference the generatives codes that operate in the logical processing I use to create a possible species project. The next step was to verify the exact working of the new generative codes by means of 3d scenaries, that are recognizable as "Antoni Gaudì specie's architecture". Whit project processing on the generative codes and not on a possible resulting shape design, I was able to organize by my general paradigm the attributes of the project's species : different shapes, different attributes (color, scale, proportion), to get to possible and different scenarys, all recognizable by the relative class codes. I chose three examples in Barcellona built during the period 1902 to 1914 : The Parco Guell, Casa Batllò and Casa Milà are the three reference sceneryes that I used to create the generative codes. In the second step I defined different codes that operate in sequence (it is defined in the paradigm) : The generatives codes are only subjective; they are one possible solution of my interpretation of Antoni Gaudì's identity. This codes operate in four differents ways : Geometrical codes for 2d shapes Geometrical codes for interface relations Spatial codes for 3d extrusion of 2d shapes Geometrical codes for 2d and 3d texturing of generated surfaces. By a stratified application of this codes I arrived at one idea for all the generative processes but many different, possible scenaryes, all recognizable in Gaudì's species. So, my final result has made possible sceneryes belonging to related species defined previously. At the end of my research I designed a project by combination : using Antoni Gaudì's generative codes on a new 3d scenary with a shape catalyst : the Frank Lloyd Wright Guggenheim Museum of New York. In this process I created a "hybrid scenary" : a new species of architectural look; a Guggenheim museum planned by Wright with a god pinch of Gaudì.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	2524
authors	Corrao, R. and Fulantelli, G.
year	1999
title	The Web to Support Creative Design in Architecture
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 275-283
summary	The use of the web in a didactic context appears to be extremely meaningful and effective. In Architecture, the web has huge potential: among others, it has the ability to gather an enormous amount of information, and the ability to create an active learning environment, one which affords the learner opportunities to engage and think. The paper reports on a Web Based Instruction (WBI) system developed at the Italian National Research Council -Institute for Educational and Training Technologies- to support design activities for students of the Italian Faculty of Architecture and Civil Engineering. Original features of the system allow students to study and design in an effective way. Specifically, a particular set of "virtual stationery items" has been implemented and integrated in the system to help students, enrolled on on-line courses, to mimic important traditional study activities, still gaining all the advantages of using the Web. These tools are integrated with communication tools in the same learning environment. A very important feature of the WBI system is that authorised users can enrich the information network in the system, by adding new pages and new links. In the paper we report on the structure of the system, with particular focus on the information domain. Some of the "working tools" which allow users to simulate traditional study activities and the hypertext extension mechanism are also described.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	7dcd
authors	Cotton B. and Oliver, R.
year	1999
title	Understanding Hypermedia
source	Phaidon Press Ltd, London
summary	Understanding Hypermedia 2,000 is a wonderful read. It takes you on a journey tracing the origins of hypermedia from its very early beginings way back in the 1700's with the birth of print, all the way through to the modern new media revolution. It charts the developments in technology, culture, science and the arts to give you a very broad understanding of just what hypermedia is and where it came from. Looking to the future, Understanding Hypermedia looks at the components of hypermedia - interface design, typography, text, animation, video, vrml, etc -, the processes of designing and building new media projects - including examples from the web, cdrom and kiosks - and the future of the medium. From the hypermedia innovators to the visionaries of cyberspace. This book is a wonderful, rich and fasinating source of information and inspiration for anyone interested in or working with new media today.
series	other
last changed	2003/04/23 15:14

_id	5c7d
authors	Couwenbergh, J.P., Croegaert, A., Gallez, B., Petit, P. and Tilman, M.
year	1999
title	The Architect, CAD and Teaching The Pedagogical Point of View at Tournai's ISA Saint-Luc
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 221-228
summary	Object-oriented approach to software development is discussed as a conceptual framework and working computational model for creative architectural design. Two modes of obejct orientation in design are elaborated. The more conservative mode is static, based on class- type/object-instance hierarchies. The other mode is dynamic, based on a modern view of computation as multi-threaded evolution of interacting objects.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	600e
authors	Gavin, Lesley
year	1999
title	Architecture of the Virtual Place
doi	https://doi.org/10.52842/conf.ecaade.1999.418
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 418-423
summary	The Bartlett School of Graduate Studies, University College London (UCL), set up the first MSc in Virtual Environments in the UK in 1995. The course aims to synthesise and build on research work undertaken in the arts, architecture, computing and biological sciences in exploring the realms of the creation of digital and virtual immersive spaces. The MSc is concerned primarily with equipping students from design backgrounds with the skills, techniques and theories necessary in the production of virtual environments. The course examines both virtual worlds as prototypes for real urban or built form and, over the last few years, has also developed an increasing interest in the the practice of architecture in purely virtual contexts. The MSc course is embedded in the UK government sponsored Virtual Reality Centre for the Built Environment which is hosted by the Bartlett School of Architecture. This centre involves the UCL departments of architecture, computer science and geography and includes industrial partners from a number of areas concerned with the built environment including architectural practice, surveying and estate management as well as some software companies and the telecoms industry. The first cohort of students graduated in 1997 and predominantly found work in companies working in the new market area of digital media. This paper aims to outline the nature of the course as it stands, examines the new and ever increasing market for designers within digital media and proposes possible future directions for the course.
keywords	Virtual Reality, Immersive Spaces, Digital Media, Education
series	eCAADe
email
more	http://www.bartlett.ucl.ac.uk/ve/
last changed	2022/06/07 07:51

For more results click below: