Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 508

Reformat results as: short short into frame detailed detailed into frame

_id	d5b3
authors	Knight, Michael and Brown, Andre
year	1999
title	Working in Virtual Environments through appropriate Physical Interfaces
doi	https://doi.org/10.52842/conf.ecaade.1999.431
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 431-436
summary	The work described here is aimed at contributing towards the debate and development relating to the construction of interfaces to explore buildings and their environs through virtual worlds. We describe a particular hardware and software configuration which is derived by the use of low cost games software to create the Virtual Environment. The Physical Interface responds to the work of other researchers, in this area, in particular Shaw (1994) and Vasquez de Velasco & Trigo (1997). Virtual Evironments might have the potential to be "a magical window into other worlds, from molecules to minds" (Rheingold, 1992), but what is the nature of that window? Currently it is often a translucent opening which gives a hazy and distorted (disembodied) view. And many versions of such openings are relatively expensive. We consider ways towards clearing the haze without too much expense, adapting techniques proposed by developers of low cost virtual reality systems (Hollands, 1995) for use in an architectural setting.
keywords	Virtual Environments, Games Software
series	eCAADe
email
last changed	2022/06/07 07:51

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	9b63
authors	De Mesa, A., Quilez, J. and Regot, J.
year	1999
title	Sunlight Energy Graphic and Analytic Control in 3D Modelling
doi	https://doi.org/10.52842/conf.ecaade.1999.733
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 733-738
summary	Linking solar positions with architecture is a traditional idea, but the use of graphical tools to control sunlight in urban surroundings or buildings is relatively recent. A three-dimensional working environment like the computer offers a new dimension to verify the relationships between the sun and the architecture. This paper shows a new way to calculate the incidence of solar energy in architectural environments using computer 3D modelling. The addition of virtual space visualisation to the analytic computation brings a new tool that simplifies the technical study of sunlight. We have developed several programs based upon the three-dimensional construction of the solar vault and the obstructing objects for a defined position. The first one draws the solar vault for a defined range of dates according to latitude, that is the basis of the energetic calculation. The second program computes the obstruction, i.e. the solar regions that are obstructed by any object. Finally, the third one, allow us to define an orientation to compute the energy that arrives to the analysed positioning. The last program returns the result of calculation in several ways: it shows the amount of energy through colours and makes a list of solar hours according to its energy.
keywords	Sunlight, Energy, 3D modelling
series	eCAADe
last changed	2022/06/07 07:56

_id	22b7
authors	Donath, D. and Regenbrecht, H.
year	1999
title	Der Bleistift im 21. Jahrhundert. Das architektonische Entwerfen in interaktiven VR Umgebungen. (The pencil in the 21th century. The architectural design process in Virtual Environments)
source	IAO Forum Architektur im Informationszeitalter, FhG Stuttgart, 21.-22.4.1999, proceedings, chapter 7, 10 p.
summary	In the very young discipline of Virtual Reality Applications only a few reports are available about using this technology for periods longer than in experimental setups. This paper describes experiences made during five years of usage of Virtual Reality (VR) in educational training for architects. About 100 different people were working with our systems during this period. Three programs were developed at Bauhaus University with the aim of teaching architectural students to design in three-dimesional environments. The first program called voxDesign is based on the metaphor of voxels. The second program, planeDesign, uses rectangualar planes to describe room-like situations. An other program vram for the user orientated description of flexible and own interfaces and environments is current under construction, a first verson is presented at the international computer exhibition ìCeBitî in 1999. All programs force the users to design in a 1:1 scale, that means that the design and the feedback actions are coupled in an embodied way. A real walking metaphor is used for navigation. The experiences made by users are explained too.
keywords	Virtual Reality, Interaction, Human Computer Interfaces, Digital Media
series	other
email
last changed	2003/02/26 18:58

_id	fd35
authors	Donath, Dirk
year	1999
title	Using Immersive Virtual Reality Systems for Spatial Design in Architecture
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 307-318
summary	In the very young discipline of Virtual Reality Applications only a few reports are available about using this technology for periods longer than in experimental setups. This paper describes experiences made during four years of usage of Virtual Reality (VR) in educational training for architects. About 100 different people were working with our systems during this period. Two programs were developed at Bauhaus University with the aim of teaching students in architecture in three-dimensional sketching. An other program for free and own interfaces and environments is currently under construction and will be presented at the international computer fair "CeBit" in 1999. The first program called voxDesign is based on the metaphor of voxels. The second program, planeDesign, uses rectangualar planes to describe room-like situations. All programs force the users to design in a 1:1 scale, which means that the design and the feedback actions are coupled in an embodied way. A real walking metaphor is used for navigation. The experiences made by the students are explained too.
keywords	Virtual Reality, Architecture, Design, Design Support Systems, Interaction, Research, Education, Usability, Human Computer Interfaces
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	e679
authors	Seichter, H., Donath, D. and Petzold, F.
year	2002
title	TAP – The Architectural Playground - C++ framework for scalable distributed collaborative architectural virtual environments
doi	https://doi.org/10.52842/conf.ecaade.2002.422
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 422-426
summary	Architecture is built information (Schmitt, 1999). Architects have the task of restructuring and translating information into buildable designs. The beginning of the design process where the briefing is transformed into an idea is a crucial phase in the design process. It is where the architect makes decisions which influence the rest of the design development process (Vries et al., 1998). It is at this stage where most information is unstructured but has to be integrated into a broad context. This is where TAP is positioned – to support the architect in finding solutions through the creation of spatially structured information sets without impairing thereby the creative development. We want to enrich the inspiration of an architect with a new kind of information design. A further aspect is workflow in a distributed process where the architect’s work becomes one aspect of a decentralised working patterns. The software supports collaborative work with models, sketches and text messages within an uniform surface. The representations of the various media are connected and combined with each other and the user is free to combine them according to his or her needs.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	473d
authors	Maver, Tom and Petric, Jelena
year	1999
title	Virtual Heritage: Is There a Future for the Past?
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 482-487
summary	This paper attempts an overview of the contribution which emerging information technologies - viz CAD, Multimedia, Virtual Reality and the Internet - can make to the presentation, understanding and preservation of the rich architectural heritage which exists (pro-term) in almost every cultural context. In the UK, the growing interest in sites such as Stonehenge has, through the threat of greater physical presence, increasingly kept the public at bay - a curious paradox which Virtual Reality (VR) has the potential to address. Virtual Reality (-an overly used and underly understood term-) is an information technology which can provide a convincing experience of environments which: i) exist, but are too remote, costly or hazardous, to visit. ii) don't yet exist but are planned, such as architectural designs or urban plans. iii) never will exist, other than in the imagination. iv) existed in the past and are now threatened or already lost. // This paper has its focus on the latter category, i.e. what is now becoming known as Virtual Heritage (VH), but it puts VH in the context of the broader spectrum of simulated experiences of past, present and future environments of cultural significance. The paper draws largely on the work of ABACUS, the Architecture and Building Aids Computer Unit, Strathclyde. The examples of the application of IT to VH include: i) a virtual reality experience of Historic Scotland's premier historical site: Skara Brae, the most complete neolithic settlement in Northern Europe. ii) a multimedia CD-ROM featuring some 50 of the most wonderful interiors of Glasgow's architectural treasures. iii) a computer based archive of rare and normally inaccessible 17C and 18C drawings of Scottish buildings from three seminal sources. iv) a massive 3-D model of Glasgow (some 10,000 buildings located on the hilly terrain of the city), which is now accessible on the Internet. // The paper concludes with conjectures based on the examples given of how emerging information technologies can help secure a future for the past.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	552c
authors	Vélez Jahn, Gonzalo
year	2000
title	Congresos Virtuales en Arquitectura: Experiencias y vivencias (Virtual Congresses in Architecture: Life Experiences)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 15-19
summary	Growing capacities of the Internet-WWW as a digital graphical medium are rapidly opening doors towards professional communication particularly fostering the dialogue within disciplines relying on those resources. It is now feasible to incorporate through virtual congresses and related events a vast group of, formerly, non-participants to events relying on physical presence. Specifically, as ibero-american architects, we must make appropriate use of advantages brought upon us by the joint effort of telecommunications and informatics that allow the challenging of, until now, insurmountable difficulties on cohesive collective professional links, derived from faulty communications and physical isolation typical to our subregion. This paper aims to provide an updated frame to the subject of virtual congresses on architecture, illustrating it with a germinal and pioneering experience: “ICVA- I Virtual Congress on Architecture 1999-2000” with an iberoamerican projection in the vicinity of a thousand registrations, and of the important experiences and conclusions thereof derived.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	f610
authors	Duarte, D.L. and Snyder , N.T. (ed.)
year	1999
title	Mastering Virtual Teams
source	Jossy-Bass Publishers
summary	The original edition of Mastering Virtual Teams offered a first-of-its-kind tool kit for leaders and members of virtual teams. Now, this revised and expanded second edition includes a CD-ROM packed with useful resources that allow virtual teams to access and use the book's many checklists, assessments, and other practical tools quickly and easily. The authors provide updated guidelines, strategies, and best practices for working cross-culturally and cross-functionally, across time and distance, to see a project through. The useful tools, exercises, and real-life examples show how anyone can master the unique dynamics of virtual team participation in an environment where the old rules no longer apply.
series	other
last changed	2003/04/23 15:14

_id	600e
authors	Gavin, Lesley
year	1999
title	Architecture of the Virtual Place
doi	https://doi.org/10.52842/conf.ecaade.1999.418
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 418-423
summary	The Bartlett School of Graduate Studies, University College London (UCL), set up the first MSc in Virtual Environments in the UK in 1995. The course aims to synthesise and build on research work undertaken in the arts, architecture, computing and biological sciences in exploring the realms of the creation of digital and virtual immersive spaces. The MSc is concerned primarily with equipping students from design backgrounds with the skills, techniques and theories necessary in the production of virtual environments. The course examines both virtual worlds as prototypes for real urban or built form and, over the last few years, has also developed an increasing interest in the the practice of architecture in purely virtual contexts. The MSc course is embedded in the UK government sponsored Virtual Reality Centre for the Built Environment which is hosted by the Bartlett School of Architecture. This centre involves the UCL departments of architecture, computer science and geography and includes industrial partners from a number of areas concerned with the built environment including architectural practice, surveying and estate management as well as some software companies and the telecoms industry. The first cohort of students graduated in 1997 and predominantly found work in companies working in the new market area of digital media. This paper aims to outline the nature of the course as it stands, examines the new and ever increasing market for designers within digital media and proposes possible future directions for the course.
keywords	Virtual Reality, Immersive Spaces, Digital Media, Education
series	eCAADe
email
more	http://www.bartlett.ucl.ac.uk/ve/
last changed	2022/06/07 07:51

_id	c408
authors	Hirschberg, U., Schmitt, G., Kurmann, D., Kolarevic, B., Johnson, B. and Donath, D.
year	1999
title	The 24 Hour Design Cycle: An Experiment in Design Collaboration over the Internet
doi	https://doi.org/10.52842/conf.caadria.1999.181
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 181-190
summary	This paper describes a Virtual Design Studio exercise involving three academic institutions University - Hong Kong (China), ETH Zurich (Switzerland), and University of Washington, Seattle (USA) - whereby teachers and students, obviously on three different continents and in three different time zones, roughly eight hours apart, were working on a common design project using computer-aided design systems, video-conferencing and a web-based central database that managed and displayed all works throughout the process. The 24 hour design cycle is a metaphor for a more open and international approach to design, facilitated through computer networks. It implies a new form of collective authorship and distributed credits and thus deals with some of the essential challenges and opportunities the internet poses to creative disciplines.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	f154
authors	Amor, Robert and Newnham, Leonard
year	1999
title	CAD Interfaces to the ARROW Manufactured Product Server
source	Proceedings of the Eighth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-8536-5] Atlanta, 7-8 June 1999, pp. 1-11
summary	The UK national project ARROW (Advanced Reusable Reliable Objects Warehouse) provides an Internet based framework through which it is possible to identify any of a range of manufactured products meeting specific design criteria. This open framework (based upon the IAI's IFCs) provides a mechanism for users to search for products from any participating manufacturer or supplier based both on specific attributes of a product or on any of the textual descriptions of the product. The service returns the closest matching products and allows the user to navigate to related information including manufacturer, suppliers, CAD details, VR displays, installation instructions, certificates, health and safety information, promotional information, costings, etc. ARROW also provides a toolkit to enable manufacturers and suppliers to more easily map and publish their information in the format utilised by the ARROW system. As part of the ARROW project we have examined the ability to interface from a design tool through to ARROW to automatically retrieve information required by the tool. This paper describes the API developed to allow CAD and simulation tools to communicate directly with ARROW and identify appropriate manufactured information. The demonstration system enables CAD systems to identify the closest matching manufactured product to a designed product and replacing the designed product with the details supplied by the manufacturer for the manufactured product as well as pulling through product attributes utilised by the design application. This paper provides a description of the ARROW framework and issues faced in providing information based upon standards as well as containing information not currently modelled in public standards. The paper looks at issues of enabling manufacturers and suppliers to move from their current world-view of product information to a more data-rich and user accessible information repository (even though this enables a uniform comparison across a range of manufacturer's products). Finally the paper comments on the likely way forward for ARROW like systems in providing quality information to end users.
keywords	Computer-aided Design, Product Retrieval
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	93a8
authors	Anders, P.
year	1999
title	Envisioning Cyberspace: Designing 3D Electronic Spaces
source	McGraw-Hill, NY
summary	Free of the constraints of physical form and limited only by imagination, new environments spring to life daily in a fantastic realm called cyberspace. The creators of this new virtual world may be programmers, designers, architects, even children. In this invigorating exploration of the juncture between cyberspace and the physical world, architect Peter Anders brings together leading-edge cyberspace art and architecture ... inspiring new techniques and technologies ... unexpected unions of reality and virtuality ... and visions of challenges and opportunities as yet unexplored. More than an invitation to tour fantastic realms and examine powerful tools, this book is a hard-eyed look at cyberspace's impact on physical, cultural, and social reality, and the human-centered principles of its design. This is a book that will set designers and architects thinkingNand a work of importance to anyone fascinated with the fast-closing space between the real and the virtual.
series	other
email
last changed	2003/04/23 15:14

_id	bd21
authors	Barría Chateau, H., García Alvarado, R., Lagos Vergara, R. and Parra Márquez, J.C.
year	1999
title	Evaluation of Spatial Perception in Virtual Environments
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 145-148
summary	The 3D environments created by computers can be used as a powerful simulation tool for architecture, especially with inmersive devices, but it is necessary to know properly their spatial characteristics to use it effectively. It is also important to consider their possibilities in communication networks and their implications in contemporary architecture. For this reason, the goal of this research is to evaluate the perception of virtual architectonic spaces in relation to the perception of real architectonic spaces. This research is based on the comparison of experiences of university students in a real space (Entrance Hall of Faculty of Economy) and in the same space modeled by a computer. The evaluation considers tests with stereoscopic helmets and interactive navigation, making questionnaires to characterize the sensation of dimensions, relationships and time for an specific activity. The measuring of real and virtual spaces are made through references (furniture, textures, etc.) or by proportional relations between height, width and depth, in different patterns. The experience also reveals mental schemes to perceive the dimension of architectonic space and the orientation in a real and virtual environment. Besides, the research allows to relate the different levels of complexity and information with the understanding of real architectonic space and modeled space.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	3936
authors	Geroimenko, Vladimir
year	1999
title	Online Photorealistic VR with Interactive Architectural Objects
doi	https://doi.org/10.52842/conf.ecaade.1999.414
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 414-417
summary	This paper describes how Virtual Reality (VR) technologies can be used for modelling photorealistic environments with interactive and changeable architectural content. This application of VR allows us to create photograph-based panoramic models of real places that include a variety of interactive architectural objects and details. The user is able not only to navigate through a virtual environment (look around, up and down, zoom, jump to another viewpoint or location) but also to change buildings or their architectural details by clicking, moving or rotating. The following types of interactive objects are completely integrated with a virtual environment: 2D image-based objects, 3D image-based objects, 3D VRML-based objects and onscreen world controls. The application can be used effectively for teaching, including distance Internet-based education, project presentations and rapid prototyping. A sample VR environment is presented and some of the key creative and technological issues are discussed.
keywords	Virtual Reality Modelling, Architectural Design, Interactive Contents, Photorealistic Environments
series	eCAADe
email
last changed	2022/06/07 07:51

_id	9c3e
authors	Maher, M.L., Skow, B. and Cicognani, A.
year	1999
title	Designing the virtual campus
source	Design Studies, 20, 319-342
summary	Virtual Worlds are networked environments that look like the physical world, and create a sense of place for the person communicating, navigating, and doing things in the virtual world. Virtual worlds have traditionally been developed as games, in fact, most virtual worlds today are games. A virtual campus has been developed in the Architecture Faculty at the University of Sydney that is based on some of the concepts of virtual worlds. The virtual campus is a place on the internet where students can go to take courses, meet with academic staff, and communicate with other students. The development of the virtual campus has been influenced by research in design science and is based on the conceptual metaphor of architectural design. The design of the virtual campus is considered at three levels: the implementation level, the representation level, and the interface level. Identifying these levels provides a basis for the design of virtual worlds for professional and educational environments. The consideration of the representation level results in a consistent use of a conceptual metaphor so that a person in the virtual campus can make use of the facilities in an intuitive manner.
series	journal paper
email
last changed	2003/04/23 15:50

_id	ga0010
id	ga0010
authors	Moroni, A., Zuben, F. Von and Manzolli, J.
year	2000
title	ArTbitrariness in Music
source	International Conference on Generative Art
summary	Evolution is now considered not only powerful enough to bring about the biological entities as complex as humans and conciousness, but also useful in simulation to create algorithms and structures of higher levels of complexity than could easily be built by design. In the context of artistic domains, the process of human-machine interaction is analyzed as a good framework to explore creativity and to produce results that could not be obtained without this interaction. When evolutionary computation and other computational intelligence methodologies are involved, every attempt to improve aesthetic judgement we denote as ArTbitrariness, and is interpreted as an interactive iterative optimization process. ArTbitrariness is also suggested as an effective way to produce art through an efficient manipulation of information and a proper use of computational creativity to increase the complexity of the results without neglecting the aesthetic aspects [Moroni et al., 2000]. Our emphasis will be in an approach to interactive music composition. The problem of computer generation of musical material has received extensive attention and a subclass of the field of algorithmic composition includes those applications which use the computer as something in between an instrument, in which a user "plays" through the application's interface, and a compositional aid, which a user experiments with in order to generate stimulating and varying musical material. This approach was adopted in Vox Populi, a hybrid made up of an instrument and a compositional environment. Differently from other systems found in genetic algorithms or evolutionary computation, in which people have to listen to and judge the musical items, Vox Populi uses the computer and the mouse as real-time music controllers, acting as a new interactive computer-based musical instrument. The interface is designed to be flexible for the user to modify the music being generated. It explores evolutionary computation in the context of algorithmic composition and provides a graphical interface that allows to modify the tonal center and the voice range, changing the evolution of the music by using the mouse[Moroni et al., 1999]. A piece of music consists of several sets of musical material manipulated and exposed to the listener, for example pitches, harmonies, rhythms, timbres, etc. They are composed of a finite number of elements and basically, the aim of a composer is to organize those elements in an esthetic way. Modeling a piece as a dynamic system implies a view in which the composer draws trajectories or orbits using the elements of each set [Manzolli, 1991]. Nonlinear iterative mappings are associated with interface controls. In the next page two examples of nonlinear iterative mappings with their resulting musical pieces are shown.The mappings may give rise to attractors, defined as geometric figures that represent the set of stationary states of a non-linear dynamic system, or simply trajectories to which the system is attracted. The relevance of this approach goes beyond music applications per se. Computer music systems that are built on the basis of a solid theory can be coherently embedded into multimedia environments. The richness and specialty of the music domain are likely to initiate new thinking and ideas, which will have an impact on areas such as knowledge representation and planning, and on the design of visual formalisms and human-computer interfaces in general. Above and bellow, Vox Populi interface is depicted, showing two nonlinear iterative mappings with their resulting musical pieces. References [Manzolli, 1991] J. Manzolli. Harmonic Strange Attractors, CEM BULLETIN, Vol. 2, No. 2, 4 -- 7, 1991. [Moroni et al., 1999] Moroni, J. Manzolli, F. Von Zuben, R. Gudwin. Evolutionary Computation applied to Algorithmic Composition, Proceedings of CEC99 - IEEE International Conference on Evolutionary Computation, Washington D. C., p. 807 -- 811,1999. [Moroni et al., 2000] Moroni, A., Von Zuben, F. and Manzolli, J. ArTbitration, Las Vegas, USA: Proceedings of the 2000 Genetic and Evolutionary Computation Conference Workshop Program – GECCO, 143 -- 145, 2000.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	6285
authors	Pratini, Edison
year	1999
title	Esboçando com Gestos: O Projeto 3D SketchMaker (Sketching with Gestures: The 3D SketchMaker Project)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 141-144
summary	The 3D SketchMaker Project has developed two prototypes for a gestural 3D sketching interface in a computer system to be used in the earliest phases of the design process. The goal of this ongoing research is to provide architects, and other designers involved in object conception, with a 3D gestural instrument that takes advantage of new virtual reality resources and is more natural than using the mouse, less difficult than learning complex software and less abstract than manipulating 2D entities on orthogonal projections. The focus of this project is on the input interface, taking into consideration two factors: First, for many architects and designers, one of the main reasons for not using 3D modeling from the very beginning of the design process is that both current computer hardware and software are hardly appropriate to do the spontaneous and quick drawings that are used to assist in conceptualizing their objects. Second, three-dimensional modeling packages use two-and-three dimensional elements, in a 3D environment, but usually employ 2D input devices that are not appropriate to work in 3D environments, such as mice or pen-and-tablets. The 3D SketchMaker was conceived to take advantage of a natural tendency most people have in using gesture as an aid to language when trying to describe the shape, form or volume of objects. The system is intended to assist or replace the first 2D drawing steps in the design process, generating rough 3D sketches that can be refined later. It is, in essence, a 3D modeling system (a prototype, at this time) directed to do sketching with hand movements and gestures in a virtual reality environment.
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	1570
authors	Sowizral, H.A. and Deering, M.F.
year	1999
title	The Java 3D API and Virtual Reality
source	IEEE Computer Graphics and Applications, May/June
summary	Java 3D proves a natural choice for any Java programmer wanting to write an interactive 3D graphics program. A programmer constructs a scene graph containing graphic objects, lights, sounds, environmental effects objects, and behavior objects that handle interactions or modify other objects in the scene graph. The programmer then hands that scene graph to Java 3D for execution. Java 3D starts rendering objects and executing behaviors in the scene graph. Virtual reality applications go through an identical writing process. However, before a user can use such an application, Java 3D must additionally know about the user's physical characteristics (height, eye separation, and so forth) and physical environment (number of displays, their location, trackers, and so on). Not surprisingly, such information varies from installation to installation and from user to user. So Java 3D lets application developers separate their application's operation from the vagaries of the user's final display environment. The Java 3D application programmer's interface (API) provides a very flexible platform for building a broad range of graphics applications. Developers have already used Java 3D to build applications in a variety of domains including mechanical CAD, molecular visualization, scientific visualization, animation previews, geographic information systems, business graphics, 3D logos, and educational offerings. Virtual reality applications have included immersive workbench applications, headtracked shutter-glass-based desktop applications, and portals (a cave-like room with multiple back-projected walls).
series	journal paper
last changed	2003/04/23 15:50

_id	ce86
authors	Von Wodtke, Mark
year	1999
title	Design with Digital Tools : Using New Media Creatively
source	McGraw Hill (Tx)
summary	Now, you can dive into all aspects of digital design confidentlywith this vital skill-building resource. Written by noted designer, educator, and author Mark von Wodtke, this new, perfectly timed book delivers ready-to-use professional guidance on the tools that are revolutionizing the design professions. It can help you and your design team use information technology more effectively and also help you engage your clients online. Use this book in your office, or in courses teaching design and the effective use of new media. With scores of examples, methods, strategies, and techniques, Mark von Wodtke hands you everything you need to work your way through 3-D prototyping, virtual reality environments, CAD programs, multimedia, and much more. In addition, you get hands-on help with the nuts-and-bolts of finding free information and images quickly, applying templates and applets, gaining access to detail, libraries, and smoothing workflow with management and collaborative tools.
series	other
last changed	2003/02/26 18:58

For more results click below: