Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 721

Reformat results as: short short into frame detailed detailed into frame

_id	b0e7
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2000
title	The Re-Convergence of Art and Science: A Vehicle for Creativity
doi	https://doi.org/10.52842/conf.caadria.2000.491
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 491-500
summary	Ever-increasing complexity in product design and the need to deliver a cost-effective solution that benefits from a dynamic approach requires the employment and adoption of innovative design methods which ensure that products are of the highest quality and meet or exceed customers' expectations. According to Bronowski (1976) science and art were originally two faces of the same human creativity. However, as civilisation advances and works became specialised, the dichotomy of science and art gradually became apparent. Hence scientists and artists were born, and began to develop work that was polar opposite. The sense of beauty itself became separated from science and was confined within the field of art. This dichotomy existed through mankind's efforts in advancing civilisation to its present state. This paper briefly examines the relationship between art and science through the ages and discusses their relatively recent re-convergence. Based on this hypothesis, this paper studies the current state of the convergence between arts and sciences and examines the current relationship between the two by considering real world applications and products. The study of such products and their successes and impact they had in the marketplace due to their designs and aesthetics rather than their advanced technology that had partially failed them appears to support this argument. This text further argues that a re-convergence between art and science is currently occurring and highlights the need for accelerating this process. It is suggested that re-convergence is a result of new technologies which are adopted by practitioners that include effective visualisation and communication of ideas and concepts. Such elements are widely found today in multimedia and Virtual Environments (VEs) where such tools offer increased power and new abilities to both scientists and designers as both venture in each other's domains. This paper highlights the need for the employment of emerging computer based real-time interactive technologies that are expected to enhance the design process through real-time prototyping and visualisation, better decision-making, higher quality communication and collaboration, lessor error and reduced design cycles. Effective employment and adoption of innovative design methods that ensure products are delivered on time, and within budget, are of the highest quality and meet customer expectations are becoming of ever increasing importance. Such tools and concepts are outlined and their roles in the industries they currently serve are identified. Case studies from differing fields are also studied. It is also suggested that Virtual Reality interfaces should be used and given access to Computer Aided Design (CAD) model information and data so that users may interrogate virtual models for additional information and functionality. Adoption and appliance of such integrated technologies over the Internet and their relevance to electronic commerce is also discussed. Finally, emerging software and hardware technologies are outlined and case studies from the architecture, electronic games, and retail industries among others are discussed, the benefits are subsequently put forward to support the argument. The requirements for adopting such technologies in financial, skills required and process management terms are also considered and outlined.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ga0023
id	ga0023
authors	Brotzu, PierPaolo and Maiocchi, Marco
year	2000
title	A Generative Approach to Variations in Production Processes
source	International Conference on Generative Art
summary	Many work procedures in generating various types of products (such as execution of recipes for food, work operation for leather, procedures for conservation of vegetables, factory workmanship processes, etc) are characterised by precise procedural steps. Each step can be defined, at the proper detail level, in terms of kind of operations, input conditions, output results; then, a complete procedure can be exploited as a set of partially ordered steps of such a kind of functions. The formalisation of such a steps allows to evaluate procedures devoted to the same goal, introducing metrics for comparing them in terms of originality or imitation. Furtherly, a contextual analysis of different procedures devoted to similar goals allows to verify possible variations in the procedures, introducing innovation and changes on the basis of the available examples. The changes can be automated through proper algorithms, just using techniques of learning by examples, in the respect of verifiable constraints. The results can be verified, and used again as a new enriched experienced basis to improve the innovation procedures. The paper will describe the approach for the analysis and the description, will propose an experienced metric, and will show examples of generation of new innovative methods based on the automated analysis of successful examples. All the practical examples will be expressed in cooking recipes, described, compared in terms of plagiarism with properly defined metrics, improved with automatic generation based on experience and examples, properly checked and validated.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	3264
authors	Chen, Kuang-Hsiung and Tsai, Wen-Hsiang
year	2000
title	Vision-based obstacle detection and avoidance for autonomous land vehicle navigation in outdoor roads
source	Automation in Construction 10 (1) (2000) pp. 1-25
summary	An effective approach to obstacle detection and avoidance for autonomous land vehicle (ALV) navigation in outdoor road environments using computer vision and image sequence techniques is proposed. To judge whether an object newly appearing in the image of the current cycle taken by the ALV is an obstacle, the object shape boundary is first extracted from the image. After the translation from the ALV location in the current cycle to that in the next cycle is estimated, the position of the object shape in the image of the next cycle is predicted, using coordinate transformation techniques based on the assumption that the height of the object is zero. The predicted object shape is then matched with the extracted shape of the object in the image of the next cycle to decide whether the object is an obstacle. We use a reasonable distance measure to compute the correlation measure between two shapes for shape matching. Finally, a safe navigation point is determined, and a turn angle is computed to guide the ALV toward the navigation point for obstacle avoidance. Successful navigation tests show that the proposed approach is effective for obstacle detection and avoidance in outdoor road environments.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	3a3d
authors	Coors, Volker
year	2002
title	Resource-Adaptive 3D Maps for Location Based Services
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.29-I.38
summary	In this paper, we present a database driven approach for managing and visualizing 3D urban city models and related multimedia content. Such a 3D database is a core component of a 3D Cadastre system (Coors 2002a). In the TellMaris project (IST 2000- 28249, www.tellmaris.com), we will make use of the 3D database to generate 3D maps. The objective of TellMaris is the development of a generic 3D-map interface to tourist information on mobile computers. The interface provides a new concept for creating value added information services on mobile computers for the European citizens related to geographical information. The interface is in the project used for accessing tourist information relevant for boat tourism in the Baltic Sea and Aegean Sea area in the Mediterranean. In this paper we focus on the online generation and compression of 3D-maps in order to make use of these maps in a mobile enviroment.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/03/29 10:42

_id	ec4d
authors	Croser, J.
year	2001
title	GDL Object
source	The Architect’s Journal, 14 June 2001, pp. 49-50
summary	It is all too common for technology companies to seek a new route to solving the same problem but for the most part the solutions address the effect and not the cause. The good old-fashioned pencil is the perfect example where inventors have sought to design-out the effect of the inherent brittleness of lead. Traditionally different methods of sharpening were suggested and more recently the propelling pencil has reigned king, the lead being supported by the dispensing sleeve thus reducing the likelihood of breakage. Developers convinced by the Single Building Model approach to design development have each embarked on a difficult journey to create an easy to use feature packed application. Unfortunately it seems that the two are not mutually compatible if we are to believe what we see emanating from Technology giants Autodesk in the guise of Architectural Desktop 3. The effect of their development is a feature rich environment but the cost and in this case the cause is a tool which is far from easy to use. However, this is only a small part of a much bigger problem, Interoperability. You see when one designer develops a model with one tool the information is typically locked in that environment. Of course the geometry can be distributed and shared amongst the team for use with their tools but the properties, or as often misquoted, the intelligence is lost along the way. The effect is the technological version of rubble; the cause is the low quality of data-translation available to us. Fortunately there is one company, which is making rapid advancements on the whole issue of collaboration, and data sharing. An old timer (Graphisoft - famous for ArchiCAD) has just donned a smart new suit, set up a new company called GDL Technology and stepped into the ring to do battle, with a difference. The difference is that GDL Technology does not rely on conquering the competition, quite the opposite in fact their success relies upon the continued success of all the major CAD platforms including AutoCAD, MicroStation and ArchiCAD (of course). GDL Technology have created a standard data format for manufacturers called GDL Objects. Product manufacturers such as Velux are now able to develop product libraries using GDL Objects, which can then be placed in a CAD model, or drawing using almost any CAD tool. The product libraries can be stored on the web or on CD giving easy download access to any building industry professional. These objects are created using scripts which makes them tiny for downloading from the web. Each object contains 3 important types of information: · Parametric scale dependant 2d plan symbols · Full 3d geometric data · Manufacturers information such as material, colour and price Whilst manufacturers are racing to GDL Technologies door to sign up, developers and clients are quick to see the benefit too. Porsche are using GDL Objects to manage their brand identity as they build over 300 new showrooms worldwide. Having defined the building style and interior Porsche, in conjunction with the product suppliers, have produced a CD-ROM with all of the selected building components such as cladding, doors, furniture, and finishes. Designing and detailing the various schemes will therefore be as straightforward as using Lego. To ease the process of accessing, sizing and placing the product libraries GDL Technology have developed a product called GDL Object Explorer, a free-standing application which can be placed on the CD with the product libraries. Furthermore, whilst the Object Explorer gives access to the GDL Objects it also enables the user to save the object in one of many file formats including DWG, DGN, DXF, 3DS and even the IAI's IFC. However, if you are an AutoCAD user there is another tool, which has been designed especially for you, it is called the Object Adapter and it works inside of AutoCAD 14 and 2000. The Object Adapter will dynamically convert all GDL Objects to AutoCAD Blocks during placement, which means that they can be controlled with standard AutoCAD commands. Furthermore, each object can be linked to an online document from the manufacturer web site, which is ideal for more extensive product information. Other tools, which have been developed to make the most of the objects, are the Web Plug-in and SalesCAD. The Plug-in enables objects to be dynamically modified and displayed on web pages and Sales CAD is an easy to learn and use design tool for sales teams to explore, develop and cost designs on a Notebook PC whilst sitting in the architects office. All sales quotations are directly extracted from the model and presented in HTML format as a mixture of product images, product descriptions and tables identifying quantities and costs. With full lifecycle information stored in each GDL Object it is no surprise that GDL Technology see their objects as the future for building design. Indeed they are not alone, the IAI have already said that they are going to explore the possibility of associating GDL Objects with their own data sharing format the IFC. So down to the dirty stuff, money and how much it costs? Well, at the risk of sounding like a market trader in Petticoat Lane, "To you guv? Nuffin". That's right as a user of this technology it will cost you nothing! Not a penny, it is gratis, free. The product manufacturer pays for the license to host their libraries on the web or on CD and even then their costs are small costing from as little as 50p for each CD filled with objects. GDL Technology has come up trumps with their GDL Objects. They have developed a new way to solve old problems. If CAD were a pencil then GDL Objects would be ballistic lead, which would never break or loose its point. A much better alternative to the strategy used by many of their competitors who seek to avoid breaking the pencil by persuading the artist not to press down so hard. If you are still reading and you have not already dropped the magazine and run off to find out if your favorite product supplier has already signed up then I suggest you check out the following web sites www.gdlcentral.com and www.gdltechnology.com. If you do not see them there, pick up the phone and ask them why.
series	journal paper
email
last changed	2003/04/23 15:14

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	c09e
authors	Jozen, T., Kaga, A., Wang, L., Oh, S. and Sasada, T.
year	2000
title	The Concept Network Model Database. Image Database for Extending Design
doi	https://doi.org/10.52842/conf.caadria.2000.379
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 379-388
summary	This paper proposes a new design methodology and a system to support the design process on making concept from verbal words to concrete shapes by extending architects' imagination. Our system is using the image archive database that can be an effective means for novel ideas.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2023_205
id	ecaade2023_205
authors	Meeran, Ahmed and Joyce, Sam
year	2023
title	Rethinking Airport Spatial Analysis and Design: A GAN based data driven approach using latent space exploration on aerial imagery for adaptive airport planning
doi	https://doi.org/10.52842/conf.ecaade.2023.2.501
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 501–510
summary	Airports require long term planning, balancing estimations of future demand against available airfield land and site constraints. This is becoming more critical with climate change and the transition to sustainable aviation fuelling infrastructure. This paper demonstrates a novel procedure using Satellite Imagery and Generative Learning to aid in the comparative analysis and early-stage airfield design. Our workflow uses a GAN trained on 2000 images of airports transforming them into a high-dimensional latent space capturing the typologies’ large-scale features. Using a process of projection and dimensional-reduction methods we can locate real-world airport images in the generative latent space and vice-versa. With this capability we can perform comparative “neighbour” analysis at scale based on spatial similarity of features like airfield configuration, and surrounding context. Using this low-dimensional 3D ‘airport designs space’ with meaningful markers provided by existing airports allows for ‘what if’ modelling, such as visualizing an airport on a site without one, modifying an existing airport towards another target airport, or exploring changes in terrain, such as due to climate change or urban development. We present this method a new way to undertake case study, site identification and analysis, as well as undertake speculative design powered by typology informed ML generation, which can be applied to any typologies which could use aerial images to categorize them.
keywords	Airport Development, Machine Learning, GAN, High Dimensional Analysis, Parametric Space Exploration, tSNE, Latent Space Exploration, Data Driven Planning
series	eCAADe
email
last changed	2023/12/10 10:49

_id	4cd1
authors	Abdelmawla, S., Elnimeiri, M. and Krawczyk, R.
year	2000
title	Structural Gizmos
doi	https://doi.org/10.52842/conf.acadia.2000.115
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 115-121
summary	Architects are visual learners. The Internet has enabled interactive learning tools that can be used to assist in visual thinking of structural concepts, especially at the introductory levels. Here, we propose a visual approach for understanding structures through a series of interactive learning modules, or ’gizmos’. These gizmos, are the tools that the student may use to examine one structural concept at a time. Being interactive, they offer many more possibilities beyond what one static problem can show. The approach aims to enhance students’ visual intuition, and hence understanding of structural concepts and the parameters affecting design. This paper will present selected structural gizmos, how they work, and how they can enhance structural education for architects.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddssar0001
id	ddssar0001
authors	Achten, Henri and Leeuwen, Jos van
year	2000
title	Towards generic representations of designs formalised as features
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Feature-Based Modelling (FBM) is an information modelling technique that allows the formalisation of design concepts and using these formal definitions in design modelling. The dynamic nature of design and design information calls for a specialised approach to FBM that takes into account flexibility and extensibility of Feature Models of designs. Research work in Eindhoven has led to a FBM framework and implementation that can be used to support design.. Feature models of a design process has demonstrated the feasibility of using this information modelling technique. To develop the work on FBM in design, three tracks are initiated: Feature model descriptions of design processes, automated generic representation recognition in graphic representations, and Feature models of generic representations. The paper shows the status of the work in the first two tracks, and present the results of the research work.
series	DDSS
last changed	2003/11/21 15:15

_id	bb5f
authors	Ahmad Rafi, M.E. and Mohd Fazidin, J.
year	2001
title	Creating a City Administration System (CAS) using Virtual Reality in an Immersive Collaborative Environment (ICE)
doi	https://doi.org/10.52842/conf.ecaade.2001.449
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 449-453
summary	Current problems in administration of a city are found to be decentralized and noninteractive for an effective city management. This usually will result in inconsistencies of decision-making, inefficient services and slow response to a particular action. City administration often spends more money, time and human resource because of these problems. This research demonstrates our research and development of creating a City Administration System (CAS) to solve the problems stated above. The task of the system is to use information, multimedia and graphical technologies to form a database in which the city administrators can monitor, understand and manage an entire city from a central location. The key technology behind the success of the overall system uses virtual reality and immersive collaborative environment (ICE). This system employs emerging computer based real-time interactive technologies that are expected to ensure effective decisionmaking process, improved communication, and collaboration, error reduction, (Rafi and Karboulonis, 2000) between multi disciplinary users and approaches. This multi perspective approach allows planners, engineers, urban designers, architects, local authorities, environmentalists and general public to search, understand, process and anticipate the impact of a particular situation in the new city. It is hoped that the CAS will benefit city administrators to give them a tool that gives them the ability to understand, plan, and manage the business of running the city.
keywords	City Administration System (CAS), Virtual Reality, Immersive Collaborative Environment (ICE), Database
series	eCAADe
email
last changed	2022/06/07 07:54

_id	1838
authors	Akleman, E., Chen, J. and Meric, B.
year	2000
title	Intuitive and Effective Design of Periodic Symmetric Tiles
doi	https://doi.org/10.52842/conf.acadia.2000.123
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 123-127
summary	This paper presents a new approach for intuitive and effective design of periodic symmetric tiles. We observe that planar graphs can effectively represent symmetric tiles and graph drawing provides an intuitive paradigm for designing symmetric tiles. Moreover, based on our theoretical work to represent hexagonal symmetry by rectangular symmetry, we are able to present all symmetric tiles as graphs embedded on a torus and based on simple modulo operations. This approach enables us to develop a simple and efficient algorithm, which has been implemented in Java. By using this software, designers, architects and artists can create interesting symmetric tiles directly on the web. We also have designed a few examples of symmetric tiles to show the effectiveness of the approach.
series	ACADIA
last changed	2022/06/07 07:54

_id	ddssar0002
id	ddssar0002
authors	Aoki, Yoshitsugu and Inage, Makoto
year	2000
title	Linguistic Operation System for Design of Architectural Form
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	In a process of architectural design, an architect not only draws by himself/herself but also lets another person modify a design by given a linguistic instruction expressing how the design ought to be. In the case of utilization of CAD systems, it is useful if the system modifies the design according to the linguistic instruction. On the other hand, because of the recent increase of the opportunities of designing a building whose roof has complicated curved surface, it extremely takes labor to change the design. This paper proposes a linguistic operation system that modifies a design according to the linguistic instruction of the modification by the user to support design of a complicated form with curved surface. The proposed system is expected to be integrated with a CAD system. First, the system presents a perspective sketch of a designed form. From the values of the design variables that characterize the form in the system, the system calculates the position of the form in “the association image space.” Second, the designer puts a linguistic instruction i.e., words as like as “let it be more light” to modify the form. The words used for the instruction have the position in the association image space. In the association image space, the system moves the position of the form to a new position that gets to be near the position of the given word. The system calculates the values of the design variables of the form corresponding to the new position. We need a mapping from every vector representing the position of the changed form in the association image space to the corresponding vector representing the values of the design variables. To find the mapping, we construct a neural network system with three levels. Finally, the system presents a perspective sketch of changed form using the calculated values of design variables.
series	DDSS
last changed	2003/11/21 15:15

_id	86dc
authors	Aouad, G., and Price, A.D.F.
year	1993
title	An integrated system to aid the planning of concrete structures: introducing the system
source	The Int. Journal of Construction IT1(2), pp.1-14
summary	This paper reports on the development at Loughborough University of a CAD-based integrated model to aid the planning of in-situ concrete structures. The system development started after a review of the planning models currently available and after a detailed questionnaire survey undertaken amongst the top UK and US contractors on the current status of planning techniques and information technology. The main aim of this system is to automate the planning process of in-situ concrete structures using data generated by CAD systems. So far, the integration of a CAD system (AutoCAD 10) and a computerized scheduling system (Artemis 2000) has been achieved on a typical IBM-PC. This enables the generation of network plans using AutoCAD which are then automatically transferred to the Artemis system for time and cost analyses.Traditionally, construction planners are faced with many conventional drawings and documents which are used to re-extract information relevant to their planning processes. Such an approach can be very inefficient as it involves data double-handling and is often error prone. In addition, current computerized construction planning applications are little more than the automation of manual formulations of plans. For example, data are fed into the planning system and computations are performed using either CPM (Critical Path Method) or PERT (Programme Evaluation and Review Technique). However, data relating to the planning process such as activity lists, resources requirements and durations are not automatically generated within the system. It would thus seem logical to devise a CAD-based integrated planning model which accepts data in its electronic format and involves some integration of the traditional planning approach. This paper introduces the proposed CAD-based integrated planning model and describes its different components. In addition, it discusses the system functional specifications and summarizes the main benefits and limitations of such a model.
series	journal paper
last changed	2003/05/15 21:45

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	1f5c
authors	Beesley, Philip and Seebohm, Thomas
year	2000
title	Digital Tectonic Design
doi	https://doi.org/10.52842/conf.ecaade.2000.287
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 287-290
summary	Digital tectonic design is a fresh approach to architectural design methodology. Tectonics means a focus on assemblies of construction elements. Digital tectonics is an evolving methodology that integrates use of design software with traditional construction methods. We see digital tectonic design as a systematic use of geometric and spatial ordinances, used in combination with details and components directly related to contemporary construction. The current approach will, we hope, lead to an architectural curriculum based on generative form making where the computer can be used to produce systems of forms algorithmically. Digital design has tended to remain abstract, emphasizing visual and spatial arrangements often at the expense of materials and construction. Our pursuit is translation of these methods into more fully realized physical qualities. This method offers a rigorous approach based on close study of geometry and building construction elements. Giving a context for this approach, historical examples employing systematic tectonic design are explored in this paper. The underlying geometric ordinance systems and the highly tuned relationships between the details in these examples offer design vocabularies for use within the studio curriculum. The paper concludes with a detailed example from a recent studio project demonstrating particular qualities developed within the method. The method involves a wide range of scales, relating large-scale gestural and schematic studies to detailed assembly systems. Designing in this way means developing geometric strategies and, in parallel, producing detailed symbols or objects to be inserted. These details are assembled into a variety of arrays and groups. The approach is analogous to computer-aided designÕs tradition of shape grammars in which systems of spatial relationships are used to control the insertion of shapes within a space. Using this approach, a three-dimensional representation of a building is iteratively refined until the final result is an integrated, systematically organized complex of symbols representing physical building components. The resulting complex offers substantial material qualities. Strategies of symbol insertions and hierarchical grouping of elements are familiar in digital design practice. However these strategies are usually used for automated production of preconceived designs. In contrast to thsse normal approaches this presentation focuses on emergent qualities produced directly by means of the complex arrays of symbol insertions. The rhyth
keywords	3D CAD Systems, Design Practice, 3D Design Strategies
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	7da7
authors	Benedetti, Cristina and Salvioni, Giulio
year	1999
title	The Use of Renewable Resource in Architecture: New Teaching Methodologies
doi	https://doi.org/10.52842/conf.ecaade.1999.751
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 751-756
summary	The program is organized into four parts. Each is very much connected, both logically and methodologically, so that the unit as a whole consists of a content and method of access that are not divided up. This method is not in a chronological order that simply goes in one direction, rather it allows the user to "refer back", in real time and in different directions. For the simple purpose of explanation, the sections of the program are listed as follows: (-) "Basic information" concerns the basics of bioclimatic and timber architecture. Without this knowledge, the other two sections would be difficult to understand; (-) "Actual buildings throughout the world"; give examples of architectural quality; they concretize the basics of bioclimatic and timber architecture; (-) "Students' Masters Theses", that follow on from the basic information and the learning experience "in the field", and guided by the lecturer, have a critical approach to actual buildings throughout the world. (-) A multimedia data-sheet organized to ensure a clear and straightforward presentation of information about the construction products. It relies on a tab-based navigation interface that gives users access to eight different stacked windows.
keywords	Architecture, Multimedia, Timber, Bioclimatic, Classification
series	eCAADe
email
last changed	2022/06/07 07:54

_id	3f35
authors	Bermudez, Julio and King, Kevin
year	2000
title	Media interaction and design process: establishing a knowledge base
source	Automation in Construction 9 (1) (2000) pp. 37-56
summary	Integrating computers in architectural design means to negotiate between centuries-old analog design methods and the new digital systems of production. Analog systems of architectural production use tracing paper, vellum, graphite and ink, clipboard, clay, balsa wood, plastic, metal, etc. Analog systems have also been termed "handmade", "manual", "material" or "physical". Digital systems of architectural production use scanning, image manipulation, visualization, solid modeling, computer aided drafting, animation, rendering, etc. Digital systems have also been called "electronic", "computer-aided", "virtual", etc. The difficulty lies in the underdeveloped state of the necessary methods, techniques, and theories to relate traditional and new media. Recent investigations on the use of multiple iterations between manual and electronic systems to advance architectural work show promising results. However, these experiments have not been sufficiently codified, cross-referenced and third party tested to conform a reliable knowledge base. This paper addresses this shortcoming by bringing together reported experiences from diverse researchers over the past decade. This summary is informed by more than three years of continuous investigation in the impacts of analog-digital conversations in the design process. The goal is to establish a state-of-the-art common foundation that permits instructors, researchers and practitioners to refer to, utilize, test, criticize and develop. An appendix is included providing support for the paper's arguments.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	sigradi2005_438
id	sigradi2005_438
authors	Bessone, Miriam; Ricardo Pérez Miró, Isabel Molinas
year	2005
title	Digital visualization and new intellectual associations among language - music - architecture
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 438-443
summary	Throughout history, architecture has transposed contributions bound to structuralist focus or to musical composition. This is from linguistic and music respectively. New visualization systems show the possibility to give transpositions a new meaning, form the potentialities of hypermedia; locking for new projects parameters. This papers will show experimental workshop results developed within CI+D 2000 “New speeches and design process”. They study links and explore our work interrelating word – music and image. These processes are developed by people coming from literature, visual arts, music, and architecture areas. Lastly, the first results will be shown. Since parameters were transposed from music, by using NURBS forms, space prefiguration is tried out. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddssar0004
id	ddssar0004
authors	Bignon, J.-C., Halin, G. and Nakapan, W.
year	2000
title	Building product information search by images
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Building product information is required during the architectural design and technical design. The common access to the technical information system is the multi-criteria search mode. This search mode is adapted to the situation where an architect has a precise demand of information. But most of the time, the architect looks for ideas and wants to obtain many illustrations of product uses. Therefore, the system has to propose another search mode adapted to the situation where the demand is still fuzzy. Considering that the architect has the capacity to think with image and that an image can generate easily ideas, then a search by images seems to be suitable to the situation where an architect looks for ideas. The web is an inexhaustible resource of images we can exploit to provision an image database on a specific area. The system we propose allows making building product information search with images extracted from the web. This article presents the method used to extract images from web sites of French building product companies and how these images are used in an interactive and progressive image retrieval process.
series	DDSS
last changed	2003/11/21 15:16

For more results click below: