Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 724

Reformat results as: short short into frame detailed detailed into frame

_id	988d
authors	Russell, Peter and Forgber, Uwe
year	2000
title	The E-Talier: Inter-university Networked Design Studios
doi	https://doi.org/10.52842/conf.ecaade.2000.045
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 45-50
summary	The widespread infiltration of internet based variations of traditional areas of society (e-commerce, e-business, e-mail etc.) will not spare the halls of academia in its propagation. The term courseware is well nigh 20 years old and considerable research and development has been done in bringing network based distributed courses to university consortiums including those in architecture and civil engineering. Indeed, the European Commission has recently approved funding for a 3-year web-based virtual university of architecture and construction technology: the WINDS project led by the University of Ancona. Such attempts to create e-courses are largely an extension of typical courseware where the syllabus is quantified and divided into lessons for use by the students alone or in conjunction with their tutors and professors. This is quite adequate in conveying the base knowledge of the profession. However, the tenants of being an architect or engineer involve the deft use of that unwieldy named and deliciously imprecise tool called "design". Teaching design sooner or later involves the design studio: a pedagogically construed environment of simulation intended to train, not teach the skills of designing. This is fundamentally different from normal courseware. A network based design studio (Etalier) must be able to reflect the nature of learning design. Design studios typically involve specifically chosen design problems, researched supporting information to assist design decisions, focussed discussions, individual consultation and criticism, group criticism, public forums for presentation discussion and criticism as well as a myriad of informal undocumented communication among the students themselves. So too must an Etalier function. Essentially, it must allow collaboration through communication. Traditional barriers to collaboration include language, culture (both national and professional) and distance. Through the internet's capricious growth and the widespread use of English as a second language, the largest hurdle to attaining fruitful collaboration is probably cultural. In the case of an Etalier in a university setting, the cultural difficulties arise from administrative rules, the pedagogical culture of specific universities and issues such as scheduling and accreditation. Previous experiments with virtual design studios have demonstrated the criticality of such issues. The proposed system allows participating members to specify the degree and breadth with which they wish to partake. As opposed to specifying the conditions of membership, we propose to specify the conditions of partnership. Through the basic principal of reciprocity, issues such as accreditation and work load sharing can be mitigated. Further, the establishment of a studio market will allow students, tutors and professors from participating institutions to partake in studio projects of their choosing in accordance with their own constraints, be they related to schedule, expertise, legal or other matters. The paper describes these mechanisms and some possible scenarios for collaboration in the Etalier market.
keywords	e-Studio, Virtual Design Studio, Courseware, CSCW
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:56

_id	aa7f
authors	Bollinger, Elizabeth and Hill, Pamela
year	1993
title	Virtual Reality: Technology of the Future or Playground of the Cyberpunk?
doi	https://doi.org/10.52842/conf.acadia.1993.121
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 121-129
summary	Jaron Lanier is a major spokesperson of our society's hottest new technology: VR or virtual reality. He expressed his faith in the VR movement in this quote which appears in The User's Guide to the New Edge published by Mondo 2000. In its most technical sense, VR has attracted the attention of politicians in Washington who wonder if yet another technology developed in the United States will find its application across the globe in Asia. In its most human element, an entire "cyberpunk movement" has appealed to young minds everywhere as a seemingly safe form of hallucination. As architecture students, educators, and practitioners around the world are becoming attracted to the possibilities of VR technology as an extension of 3D modeling, visualization, and animation, it is appropriate to consider an overview of virtual reality. In virtual reality a user encounters a computersimulated environment through the use of a physical interface. The user can interact with the environment to the point of becoming a part of the experience, and the experience becomes reality. Natural and instinctive body movements are translated by the interface into computer commands. The quest for perfection in this human-computer relationship seems to be the essence of virtual reality technology. To begin to capture the essence of virtual reality without first-hand experience, it is helpful to understand two important terms: presence and immersion. The sense of presence can be defined as the degree to which the user feels a part of the actual environment. The more reality the experience provides, the more presence it has. Immersion can be defined as the degree of other simulation a virtual reality interface provides for the viewer. A highly immersive system might provide more than just visual stimuli; for example, it may additionally provide simulated sound and motion, and simultaneously prevent distractions from being present.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	4cc0
authors	Bouchlaghem, N., Khosowshahi, F. and White, J.
year	2000
title	Virtual reality as a visualisation tool: Benefits and constraints
source	CIDAC, Volume 2 Issue 4 November 2000 pp. 216-224
summary	The benefits and applications of virtual reality (VR) in the construction industry have been investigated for almost a decade. However, the practical implementation of VR in the construction industry has yet to reach maturity owing to technical constraints. The need for effective information management presents challenges: both transfer of building data to, and organisation of building information within, the virtual environment require consideration. This paper reviews the applications and benefits of VR in the built environment field and reports on a collaboration between Loughborough University and South Bank University to overcome constraints on the use of the overall VR model for whole lifecycle visualisation. The work at each research centre is concerned with an aspect of information management within VR applications for the built environment, and both data transfer and internal data organisation have been investigated. In this paper, similarities and differences between computer-aided design (CAD) and VR packages are first discussed. Three different approaches to the creation of VR models during the design stage are identified and described, with a view to providing sharing understanding across the interdiscipliary groups involved. The suitable organisation of building information within the virtual environment is then further investigated. This work focused on the visualisation of the degradation of a building, through its lifespan, with the view to provide a visual aid for developing an effective and economic project maintenance programme. Finally consideration is given to the potential of emerging standards to facilitate an integrated use of VR. The convergence towards similar data structures in VR and other construction packages may enable visualisation to be better utilised in the overall lifecycle model.
keywords	Virtual Reality, Information Management, Data Exchange, 3D Modelling, 4D Visualisation
series	journal paper
last changed	2003/05/15 21:23

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	d5b3
authors	Knight, Michael and Brown, Andre
year	1999
title	Working in Virtual Environments through appropriate Physical Interfaces
doi	https://doi.org/10.52842/conf.ecaade.1999.431
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 431-436
summary	The work described here is aimed at contributing towards the debate and development relating to the construction of interfaces to explore buildings and their environs through virtual worlds. We describe a particular hardware and software configuration which is derived by the use of low cost games software to create the Virtual Environment. The Physical Interface responds to the work of other researchers, in this area, in particular Shaw (1994) and Vasquez de Velasco & Trigo (1997). Virtual Evironments might have the potential to be "a magical window into other worlds, from molecules to minds" (Rheingold, 1992), but what is the nature of that window? Currently it is often a translucent opening which gives a hazy and distorted (disembodied) view. And many versions of such openings are relatively expensive. We consider ways towards clearing the haze without too much expense, adapting techniques proposed by developers of low cost virtual reality systems (Hollands, 1995) for use in an architectural setting.
keywords	Virtual Environments, Games Software
series	eCAADe
email
last changed	2022/06/07 07:51

_id	b792
authors	Maruyama, Y., Iwase, Y., Koga, K., Yagi, J.,Takada, H., Sunaga, N., Nishigaki, S., Ito, T. and Tamaki, K.
year	2000
title	Development of virtual and real-field construction management systems in innovative, intelligent field factory
source	Automation in Construction 9 (5-6) (2000) pp. 503-514
summary	In this study, we proposed a concept of virtual and real-field construction management systems (VR-Coms), which is integrated with virtual construction simulation, planning, scheduling, and performance management systems to evaluate productivity and safety in virtual simulated and real-field constructions. And, we built up a computational environment to develop the VR-Coms. The VR-Coms offer supporting modules for learning and discovering solutions with objective to manage construction at right speed with improved humanware and constructability. The configuration of VR-Coms is described. This paper also shows an application of agent theory to construction management.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	caadria2000_000
id	caadria2000_000
authors	Tan, Beng-Kiang; Tan, Milton; Wong, Yunn-Chii (eds.)
year	2000
title	CAADRIA 2000
doi	https://doi.org/10.52842/conf.caadria.2000
source	Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, 519 p.
summary	Ever since the advent of computer graphics in the sixties, computer-aided architectural design (CAAD) has made a great impact in architectural education and practice. Its central role as a new media for the representation and analysis of designs will ensure that it will continue to do so. The teaching and research in CAAD in Asia have also been growing in scope and in quality. In the 21st century, the challenges of architectural education and practice in the new millennium will open up new fronts in CAAD research. This conference is an important platform to evaluate the challenge and opportunities and will enable researchers to exchange ideas and collaboration in projects with specific relevance to CADD for Asia. This compilation of 48 papers were elected through a blind review by an international panel and presented at the conference in Singapore on 18 - 19 May 2000. The chapters are organised according to the main topics covered by the conference -- Collaborative Design, Simulation, Design Education, Knowledge Representation, Design Process, Information Systems, Design Tools, Virtual Reality and Computer Media. The Collaborative Design section consists of papers which deal with Collaborative Design Process interfaces to databases, Collaborative Design System for Citizen Participation, Team Awareness in Collaboration and Computer Environment for supporting Design Collaboration. The Simulation section deals with lighting studies, colour assessment, simulation of urban growth patterns, dynamic simulations in buildings and way-finding. The Design Education section consists of papers on design pedagogy in design studios using computers, virtual studios and virtual learning. The Knowledge Representation section consists of papers that deal with knowledge-based systems, design representation and shape grammar. The Design Process section consists of papers on design process and cognition, design creativity and the computer media. The Information Systems section consists of papers on information navigation, information management, design information repository and databases. The Design Tools section consists of papers on design tools based on generative systems, a new method for 3D animation and movement-in-architectural-space representation. The Virtual Reality and Computer Media section deals with virtual reality applications and tools in architecture, designing virtual environments and computer media and visualization.
series	CAADRIA
last changed	2022/06/07 07:49

_id	0ba8
authors	Tsou, J.-Y., Chow, B. and Lam, S.
year	2000
title	Applying Daylighting Simulation in Architectural Studio Education
doi	https://doi.org/10.52842/conf.ecaade.2000.255
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 255-258
summary	Computer generated simulation results are not necessarily valid design solutions. In some cases, unscientific “simulation” applications have misled designers to believe the “illusion” rendered by the system. This paper presents two case studies to highlight the pedagogy of architectural daylighting simulation. Both are located in Hong Kong’s highdensity urban context. Hong Kong is a small city, covering 1,097 square km with a population of 6.8 million. Mountains and hills dominate the topography, and more than 70% of the land is reserved for country parks. Property constraints encourage dense, high-rise construction and building on steep slopes. This creates a complex environment for daylighting design. Although the Buildings Ordinance specifies minimum standards for natural light and ventilation, residents have complained about the deterioration of their lighting condition in recent years. Challenged by the constraints imposed by Hong Kong’s physical environment, there is a need for students and professionals to explore computer simulation to integrate daylighting strategy into architectural and urban design.
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:57

_id	eb8a
authors	Achten, H., De Vries, B. and Jessurun, J.
year	2000
title	DDDOOLZ. A Virtual Reality Sketch Tool for Early Design
doi	https://doi.org/10.52842/conf.caadria.2000.451
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 451-460
summary	This paper presents DDDoolz, a desktop-VR three-dimensional voxel sketchtool. DDDoolz is developed in the Design Systems Group to explore the use of Virtual Reality technology in the early design stage. The aim is to offer a sketch-like environment in VR with an unobtrusive interface. The paper presents DDDoolz, how it is used in education and with partners in architectural practice, and some future developments.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	9b44
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2000
title	The Importance of Virtual Environments in the Design of Electronic Games and Their Relevance to Architecture
doi	https://doi.org/10.52842/conf.ecaade.2000.181
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 181-185
summary	Ever increasing complexity in architectural design and the need to deliver a cost effective solution requires the employment and adoption of innovative design methods. Although technological changes have entered the field of architecture at a slower pace, the recent adoption of 3D modelling, Virtual Environment and multimedia represent significant changes in architectural design, visualisation and presentation. These now include tools for conceptualisation, design synthesis, design presentation, desktop publishing, animation, Internet and hypermedia authoring. Uddin argues that the major activities involved in the creative and dynamic process of architectural design deal with conceptualisation, visualisation and expression of alternative ideas through two-dimensional and three-dimensional model. This paper highlights the need for the employment of emerging computer based real-time interactive technologies that are expected to enhance the design process through better decision-making, higher quality communication and collaboration, error reduction, spatial awareness, interactive design and real-time visualisation.
keywords	CAD, Game Design, Virtual Reality, Virtual Environments, Virtual Prototyping, Internet Technologies, Architecture
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	bb5f
authors	Ahmad Rafi, M.E. and Mohd Fazidin, J.
year	2001
title	Creating a City Administration System (CAS) using Virtual Reality in an Immersive Collaborative Environment (ICE)
doi	https://doi.org/10.52842/conf.ecaade.2001.449
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 449-453
summary	Current problems in administration of a city are found to be decentralized and noninteractive for an effective city management. This usually will result in inconsistencies of decision-making, inefficient services and slow response to a particular action. City administration often spends more money, time and human resource because of these problems. This research demonstrates our research and development of creating a City Administration System (CAS) to solve the problems stated above. The task of the system is to use information, multimedia and graphical technologies to form a database in which the city administrators can monitor, understand and manage an entire city from a central location. The key technology behind the success of the overall system uses virtual reality and immersive collaborative environment (ICE). This system employs emerging computer based real-time interactive technologies that are expected to ensure effective decisionmaking process, improved communication, and collaboration, error reduction, (Rafi and Karboulonis, 2000) between multi disciplinary users and approaches. This multi perspective approach allows planners, engineers, urban designers, architects, local authorities, environmentalists and general public to search, understand, process and anticipate the impact of a particular situation in the new city. It is hoped that the CAS will benefit city administrators to give them a tool that gives them the ability to understand, plan, and manage the business of running the city.
keywords	City Administration System (CAS), Virtual Reality, Immersive Collaborative Environment (ICE), Database
series	eCAADe
email
last changed	2022/06/07 07:54

_id	456a
authors	Alvarado, R.G., Parra, J.C., Vergara, R.L. and Chateau, H.B.
year	2000
title	Architectural References to Virtual Environments Design
doi	https://doi.org/10.52842/conf.ecaade.2000.151
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 151-155
summary	Based on a comparison between the perception of digital and real construction, the development of virtual systems and the review of additional sources, this paper states some differences between the design of virtual environments and architectural spaces. Virtual-reality technologies provide advanced capabilities to simulate real situations, and also to create digital worlds not referred to physical places, such as imaginary landscapes or environments devoted to electronic activities, like entertainment, learning or commerce. Some on-line services already use 3D-stages, resembling building halls and domestic objects, and several authors have mentioned virtual modeling as a job opportunity to architects. But it will argue in this paper that the design of those environments should consider their own digital characteristics. Besides, the use of virtual installations on networks impells a convergence with global media, like Internet or TV. Virtual environments can be a 3Devolution of communicational technologies, which have an increasing participation in culture, reaching a closer relationship to contemporary architecture.
keywords	Virtual Environments, Spatial Perception, Design Methodology
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	9d10
authors	Anders, Peter and Livingstone, Daniel
year	2001
title	STARS: Shared Transatlantic Augmented Reality System
doi	https://doi.org/10.52842/conf.acadia.2001.350
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 350-355
summary	Since October 2000 the authors have operated a laboratory, the Shared Transatlantic Augmented Reality System (STARS), for exploring telepresence in the domestic environment. The authors, an artist and an architect, are conducting a series of experiments to test their hypotheses concerning mixed reality and supportive environments. This paper describes these hypotheses, the purpose and construction of the lab, and preliminary results from the ongoing collaboration.
keywords	Mixed Reality, Cybrid, Art, Cyberspace, CAiiA-STAR
series	ACADIA
email
last changed	2022/06/07 07:54

_id	9638
authors	Aouad, G, M, Ormerod, M., Sun, M., Sarshar, P. Barrett, P. and Alshawi, M.
year	2000
title	Visualisation of construction information: A process view
source	CIDAC, Volume 2 Issue 4 November 2000, pp. 207-215
summary	This paper addresses the issue of information visualisation within the context of business process integration. Visual technologies offer appropriate information interfaces that facilitate the integration of mainstream construction applications. This paper assesses the needs of visualisation by the construction sector. It then describes recent developments in the areas of 4/5 dimensional modelling. This paper also investigates the state of maturity and uptake of these technologies by the industry. Following this, the results of various projects conducted by Salford within the area of information visualisation are presented. The paper concludes with a set of recommendations for the better use of visual technologies by the construction sector.
keywords	4D, Construction Process, Maturity, Virtual Reality, Visualisation, Uptake
series	journal paper
last changed	2003/05/15 21:23

_id	a136
authors	Blaise, J.Y., Dudek, I. and Drap, P.
year	1998
title	Java collaborative interface for architectural simulations A case study on wooden ceilings of Krakow
source	International Conference On Conservation - Krakow 2000, 23-24 November 1998, Krakow, Poland
summary	Concern for the architectural and urban preservation problems has been considerably increasing in the past decades, and with it the necessity to investigate the consequences and opportunities opened for the conservation discipline by the development of computer-based systems. Architectural interventions on historical edifices or in preserved urban fabric face conservationists and architects with specific problems related to the handling and exchange of a variety of historical documents and representations. The recent development of information technologies offers opportunities to favour a better access to such data, as well as means to represent architectural hypothesis or design. Developing applications for the Internet also introduces a greater capacity to exchange experiences or ideas and to invest on low-cost collaborative working platforms. In the field of the architectural heritage, our research addresses two problems: historical data and documentation of the edifice, methods of representation (knowledge modelling and visualisation) of the edifice. This research is connected with the ARKIW POLONIUM co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France) and the Institute HAiKZ of Kraków's Faculty of Architecture. The ARKIW programme deals with questions related to the use of information technologies in the recording, protection and studying of the architectural heritage. Case studies are chosen in order to experience and validate a technical platform dedicated to the formalisation and exchange of knowledge related to the architectural heritage (architectural data management, representation and simulation tools, survey methods, ...). A special focus is put on the evolution of the urban fabric and on the simulation of reconstructional hypothesis. Our contribution will introduce current ARKIW internet applications and experiences: The ARPENTEUR architectural survey experiment on Wie¿a Ratuszowa (a photogrammetrical survey based on an architectural model). A Gothic and Renaissance reconstruction of the Ratusz Krakowski using a commercial modelisation and animation software (MAYA). The SOL on line documentation interface for Kraków's Rynek G_ówny. Internet analytical approach in the presentation of morphological informations about Kraków's Kramy Bogate Rynku Krakowskiego. Object-Orientation approach in the modelling of the architectural corpus. The VALIDEUR and HUBLOT Virtual Reality modellers for the simulation and representation of reconstructional hypothesis and corpus analysis.
series	other
last changed	2003/04/23 15:14

_id	7674
authors	Bourdakis, Vassilis and Charitos, Dimitrios
year	1999
title	Virtual Environment Design - Defining a New Direction for Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1999.403
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 403-409
summary	This paper considers the design and development of virtual environments (VEs) and the way that it relates to traditional architectural education and practice. The need for practitioners who will contribute to the design of 3D content for multimedia and virtual reality applications is identified. The design of space in a VE is seen as being partly an architectural problem. Therefore, architectural design should play an important role in educating VE designers. Other disciplines, intrinsically related to the issue of VE design, are also identified. Finally, this paper aims at pointing out the need for a new direction within architectural education, which will lead towards a generation of VE architects.
keywords	Virtual Environments, Architectural Design, Architectural Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	f2f1
authors	Breen, Jack and Nottrot, Robert
year	2000
title	Project a2W. A Dialogue on New Media Perspectives
doi	https://doi.org/10.52842/conf.ecaade.2000.291
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 291-296
summary	This paper documents an initiative taking the form of a "dialogue". The format which has been developed is somewhat similar to that of the "conversation" which Mondrian conceived in 1919, taking place between two fictitious characters - A and B - discussing the new direction in art, which he called "Nieuwe Beelding" and which contributed to the "De Stijl" movement (the dialogue was followed later that year by a "trialogue" between X, Y and Z on a virtual walk taking them from the countryside to the city) 1 . This time the issue is not so much the evolvement of a new artistic or architectural style, but the role of "new media" in architecture... The present dialogue takes place between two fictitious media proponents ("Alpha" and "Omega"). They take turns questioning several issues and exchanging proposals... What are the values - and the promises - of computer supported instruments in creative design and research - concerning the art and science shaping the built environment? How do the present applications measure up, how do they compare to the expectations and ambitions expressed a number of years ago? The form of a dialogue means that issues and ideas, which are not often aired within the confines of academic discourse, can be played back and forth and a measure of exaggeration was intended from the beginning... This contribution does not in any way pretend to be all-inclusive. Rather, the paper is meant to put forward ideas and experiences - from the perspective of the Delft Media group, in practice, in teaching and in research - which may stimulate (or even irritate?) but will hopefully activate. The aim is to open up discussions, to allow other (hidden) agendas for the future to become more visible and to look for platforms for sharing concepts and fascinations, however improbable they might be...
keywords	A Dialogue on New Media
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

For more results click below: