Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 749

Reformat results as: short short into frame detailed detailed into frame

_id	2005_787
id	2005_787
authors	Veikos, Cathrine
year	2005
title	The Post-Medium Condition
doi	https://doi.org/10.52842/conf.ecaade.2005.787
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 787-794
summary	Theorists in art, architecture and visual media have described the digital world as a world of mediumlessness and proclaimed that the medium of a work, once the ontological determinant for the classification of the arts, is rendered meaningless by recent technological and cultural developments (Krauss, 2000; Negroponte, 1995; Manovich, 2001). Although indebted to specific media-based techniques and their attendant ideologies, software removes the material reality of techniques to an immaterial condition where the effects of material operations are reproduced abstractly. This paper asserts that a productive approach for digital design can be found in the acknowledgement that the importance of the digital format is not that it de-materializes media, but that it allows for the maximum intermingling of media. A re-conceptualization of media follows from this, defined now as, a set of conventions derived from the material conditions of a given technical support, conventions out of which to develop a form of expressiveness that can be both projective and mnemonic (Krauss, 2000). The paper will focus on the identification of these conventions towards the development of new forms of expressiveness in architecture. Further demonstration of the intermingling of materially-based conventions is carried out in the paper through a comparative analysis of contemporary works of art and architecture, taking installation art as a particular example. A new design approach based on the maximum intermingling of media takes account of integrative strategies towards the digital and the material and sees them as inextricably linked. In the digital “medium” different sets of conventions derived from different material conditions transfer their informational assets producing fully formed, material-digital ingenuity.
keywords	Expanded Architecture, Art Practice, Material, Information, ParametricTechniques, Evolutionary Logics
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ga0012
id	ga0012
authors	Galanter, Philip
year	2000
title	GA2: a Programming Environment for Abstract Generative Fine Art
source	International Conference on Generative Art
summary	Fine artists looking to use computers to create generative works, especially those artists inclined towards abstraction, often face an uncomfortable choice in the selection of software tools. On the one hand there are a number of commercial and shareware programs available which implement a few techniques in an easy to use GUI environment. Unfortunately such programs often impose a certain look or style and are not terribly versatile or expressive. The other choice seems to be writing code from scratch, in a language such as c or Java. This can be very time consuming as every new work seems to demand a new program, and the artist's ability to write code can seldom keep pace with his ability to imagine new visual ideas. This paper describes a software system created by the author called GA2 which has been implemented in the Matlab software environment. By layering GA2 over Matlab the artist can take advantage of a very mature programming environment which includes extensive mathematical libraries, simple graphics routines, GUI construction tools, built-in help facilities, and command line, batch mode, and GUI modes of interaction. In addition, GA2 is very portable and can run on Macintosh, Windows, and Unix systems with almost no incremental effort for multi-platform support. GA2 is a work in progress and an extension of the completed GA1 environment. It is medium independent, and can be used for all manner of image, animation, and sound production. GA1 includes a complete set of genetic algorithm operations for breeding families of graphical marks, a database function for managing and recalling various genes, a set of statistical operations for creating various distributions of marks on a canvas or animation frame, a unique Markov-chain-likeoperator for generating families of visually similar lines or paths, and a complete L-system implementation. GA2 extends GA1 by adding more generative techniques such as tiling and symmetry operations, Thom's cusp catastrophe, and mechanisms inspired by complexity science notions such as cellular automata, fractals, artificial life, and chaos. All of these techniques are encapulated in genetic representations. This paper is supplemented with examples from the authors art work, and comments on the philosophy behind this method of working, and its relation towards the reinvigoration of abstraction after post-modernism.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	2abf
id	2abf
authors	Rafi, A
year	2001
title	Design creativity in emerging technologies
source	In Von, H., Stocker, G. and Schopf, C. (Eds.), Takeover: Who’s doing art of tomorrow (pp. 41-54), New York: SpringerWein.
summary	Human creativity works best when there are constraints – pressures to react to, to shape, to suggest. People are generally not very good at making it all up from scratch (Laurel, 1991). Emerging technology particularly virtual reality (VR) Multimedia and Internet is yet to be fully discovered as it allows unprecedented creative talent, ability, skill set, creative thinking, representation, exploration, observation and reference. In an effort to deliver interactive content, designers tend to freely borrow from different fields such as advertising, medicine, game, fine art, commerce, entertainment, edutainment, film-making and architecture (Rafi, Kamarulzaman, Fauzan and Karboulonis, 2000). As a result, content becomes a base that developers transfer the technique of conventional medium design media to the computer. What developers (e.g. artist and technologist) often miss is that to develop the emerging technology content based on the nature of the medium. In this context, the user is the one that will be the best judge to value the effectiveness of the content. The paper will introduce Global Information Infrastructure (GII) that is currently being developed in the Asian region and discuss its impact on the Information Age society. It will further highlight the ‘natural’ value and characteristics of the emerging technologies in particular Virtual Reality (VR), Multimedia and Internet as a guidance to design an effective, rich and innovative content development. This paper also argues that content designers of the future must not only be both artist and technologist, but artist and technologist that are aware of the re-convergence of art and science and context in which content is being developed. Some of our exploration at the Faculty of Creative Multimedia, Multimedia University will also be demonstrated. It is hoped that this will be the evidence to guide future ‘techno-creative designers’.
keywords	design, creativity, content, emerging technologies
series	book
type	normal paper
email
last changed	2007/09/13 03:46

_id	4f9b
authors	Sarid, A. and Oxman, R.
year	2000
title	The Web as a Knowledge Representational Media for Architectural Precedents
doi	https://doi.org/10.52842/conf.ecaade.2000.245
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 245-249
summary	This paper reviews current web sites that are dealing with architectural content. The purpose of the review is to explore the potential of current webbased presentation technologies as a mean for the construction of precedent libraries on the web. The first part presents the importance of the Internet as a knowledge representation medium. The review of Internet-based representation methods of architectural precedents and architectural knowledge includes 30 existing web-sites. The criteria for evaluating these sites were based on literature reviews. The first one is a theoretical literature dealing with architectural knowledge representation and the second one is a theoretical literature related to the Internet age. The evaluation criteria drawn form these two content resources included subjects such as: knowledge representation methods, precedents display methods, organization systems, indexing, search, etc. By reviewing the web sites threw these evaluation criteria, we examine and discuss the issues and problems relating to the development of architectural libraries on the web.
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:57

_id	ga0013
id	ga0013
authors	Annunziato, Mauro and Pierucci, Piero
year	2000
title	Artificial Worlds, Virtual Generations
source	International Conference on Generative Art
summary	The progress in the scientific understanding/simulation of the evolution mechanisms and the first technological realizations (artificial life environments, robots, intelligent toys, self reproducing machines, agents on the web) are creating the base of a new age: the coming of the artificial beings and artificial societies. Although this aspect could seems a technological conquest, by our point of view it represent the foundation of a new step in the human evolution. The anticipation of this change is the development of a new cultural paradigm inherited from the theories of evolution and complexity: a new way to think to the culture, aesthetics and intelligence seen as emergent self-organizing qualities of a collectivity evolved along the time through genetic and language evolution. For these reasons artificial life is going to be an anticipatory and incredibly creative area for the artistic expression and imagination. In this paper we try to correlate some elements of the present research in the field of artificial life, art and technological grow up in order to trace a path of development for the creation of digital worlds where the artificial beings are able to evolve own culture, language and aesthetics and they are able to interact con the human people.Finally we report our experience in the realization of an interactive audio-visual art installation based on two connected virtual worlds realized with artificial life environments. In these worlds,the digital individuals can interact, reproduce and evolve through the mechanisms of genetic mutations. The real people can interact with the artificial individuals creating an hybrid ecosystem and generating emergent shapes, colors, sound architectures and metaphors for imaginary societies, virtual reflections of the real worlds.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	b966
authors	Ceccato, Cristiano and Janssen, Patrick
year	2000
title	GORBI: Autonomous Intelligent Agents Using Distributed Object-Oriented Graphics
doi	https://doi.org/10.52842/conf.ecaade.2000.297
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 297-300
summary	Autonomous agents represent a new form of thinking that is of primary importance in the age of the Internet and distributed networks, and provide a platform on which Turing’s model of sequential instruction-executing machines and von NeumannÕs connectionist vision of interconnected, concurrent fine-grain processors may be reconciled. In this paper we map this emergent paradigm to design and design intelligence by to illustrating examples of decentralised interacting agents projects.
keywords	Graphics, CAD, Internet, Evolutionary, Generative, Distributed, Decentralised, Object, Request, Broker, CORBA, OpenGL, Java, C++
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	4c4b
authors	Gavin, Lesley
year	2000
title	3D Online Learning in Multi-User Environments
doi	https://doi.org/10.52842/conf.ecaade.2000.187
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 187-191
summary	Over the last 2 years the MSc Virtual Environments course in the Bartlett School of Graduate Studies has used a 3-dimensional on-line multi-user environment to explore the possibilities for the architectural design of virtual environments. The "Bartlett" virtual world is established as the environment where students undertake group design projects. After an initial computer based face-toface workshop, students work from terminals at home and around the university. Using avatar representations of themselves, tutors and students meet in the on-line environment. The environment is used for student group discussions and demonstrations, tutorials and as the virtual "siteÕ for their design projects. The "Bartlett" world is currently open to every internet user and so often has "visitors". These visitors often engage in discussions with the students resulting in interesting dynamics in the teaching pattern. This project has been very successful and is particularly popular with the students. Observations made over the 2 years the project has been running have resulted in interesting reflections on both the role of architectural design in virtual environments and the use of such environments to extend the pedagogical structure used in traditional studio teaching. This paper will review the educational experience gained by the project and propose the ideal software environment for further development. We are now examining similar types of environments currently on the market with a view to adapting them for use as a distance learning medium.
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:51

_id	8246
authors	Rios-Castro, Lorena Itzel
year	2000
title	Cybrid Tectonics: A Panama Canal Exhibition
doi	https://doi.org/10.52842/conf.acadia.2000.015
source	ACADIA Quarterly, vol. 19, no. 2, pp. 15-16
summary	This article is a summary of a thesis project directed under the supervision of Wassim Jabi and Mehrdad Hadighi] This thesis is based on the premise that space can be created by the interaction of physical and ephemeral elements with the human body. The physical elements create a frame on which the ephemeral rely, but it is the interaction between them that produces a distinct experience of space and place. Extensive and diverse preliminary explorations range from the use of digital media in the design process, video and multimedia as a revolutionary element in 20th century art and light as a way of expression for architectural installations exploring new media. From this body of information it was conceived that certain new media add an important and particular dimension to the traditional physical medium of architecture. This constitutes a controversial and innovative approach to the creation of space and most importantly to the experience of place.
series	ACADIA
last changed	2022/06/07 07:56

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	0ba8
authors	Tsou, J.-Y., Chow, B. and Lam, S.
year	2000
title	Applying Daylighting Simulation in Architectural Studio Education
doi	https://doi.org/10.52842/conf.ecaade.2000.255
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 255-258
summary	Computer generated simulation results are not necessarily valid design solutions. In some cases, unscientific “simulation” applications have misled designers to believe the “illusion” rendered by the system. This paper presents two case studies to highlight the pedagogy of architectural daylighting simulation. Both are located in Hong Kong’s highdensity urban context. Hong Kong is a small city, covering 1,097 square km with a population of 6.8 million. Mountains and hills dominate the topography, and more than 70% of the land is reserved for country parks. Property constraints encourage dense, high-rise construction and building on steep slopes. This creates a complex environment for daylighting design. Although the Buildings Ordinance specifies minimum standards for natural light and ventilation, residents have complained about the deterioration of their lighting condition in recent years. Challenged by the constraints imposed by Hong Kong’s physical environment, there is a need for students and professionals to explore computer simulation to integrate daylighting strategy into architectural and urban design.
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:57

_id	7ee9
authors	Wood, J. B. and Chambers, Tom
year	2000
title	CAD - Enabled by the Organisation of Science and the Poetics of a Visual Language
doi	https://doi.org/10.52842/conf.ecaade.2000.327
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 327-329
summary	CADET, CAD education and training, a research unit with the Department of Architecture and Building Science (Faculty of Engineering, University of Strathclyde) promotes an integrated approach to the built environment, seeking to bring together the rational and expressive modes of thought by teaching design through IT and CAD. In recent years this has been introduced as a pilot project within the primary and secondary school sector as well as Year 1 and Year 2 of the Building Design Engineering (BDE). The presentations discussed in this paper demonstrate recent projects in a social context - modelling possible spaces via virtual reality on behalf of clients in education and social work environments. The motivation for such a creative and participatory dialogue in a community context acknowledges that, in the wake of post industrialisation, the reconstruction of our urban environments demands that we develop the tools required for a meaningful participation in the design process. The nature of a participatory process demands a demystification of the design process, which is a reality made possible by CAD.
keywords	Teaching, Organisation, Participation, Knowledge and Demystification
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:57

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	5c0f
authors	Zupancic Strojan, Tadeja and Mullins, Michael
year	2000
title	Criteria for Architectural Learning where Virtual Design Studios are Employed
doi	https://doi.org/10.52842/conf.ecaade.2000.051
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 51-54
summary	A review of VDS in recent eCAADE and ACADIA papers indicates that they tend to place most emphasis on the communication technology employed. Research is often most concerned with setting up the environment which facilitates the studio. The difficulties in simulating real-time design learning situations in VDS can be compared to earlier years of CAAD research in design education, where most emphasis was placed on the medium itself. However, in the field of CAAD research work, the focus is shifting toward the integration of digital tools with design process, and a rethinking of the role of analogue tools in that process. The limitations to current VDS are almost certain to change rapidly as more affordable and faster means of communication become available. Nevertheless, underlying pedagogical problems deserve attention in order to direct efforts towards viable models of architectural education where VDS are employed. This paper assumes a critical stance to the conventionally presented use of VDS, and asserts that the close integration of design-process with new technology will become an increasingly pressing issue. So that VDS progresses beyond the development of distributed images and a means to communicate design, it is acknowledged that they create a particular learning environment requiring attention from facilitators. The implementation of the suggested criteria will assist the integration of pedagogical engaged-learning objectives with VDS digital technologies.
keywords	VDS , Digital-Environments, Design-Education
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:57

_id	01c0
authors	Af Klercker, Jonas
year	2000
title	Modelling for Virtual Reality in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2000.209
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 209-213
summary	CAAD systems are using object modelling methods for building databases to make information available. Object data must then be made useful for many different purposes in the design process. Even if the capacity of the computer will allow an almost unlimited amount of information to be transformed, the eye does not make the transformations in the same “simple” mathematical way. Trained architects have to involve in an inventive process of finding ways to “harmonize” this new medium with the human eye and the architect’s professional experience. This paper will be an interimistic report from a surveying course. During the spring semester 2000 the CAAD division of TU-Lund is giving a course “Modelling for VR in Architecture”. The students are practising architects with experience from using object modelling CAAD. The aims are to survey different ways to use available hard- and software to create VR-models of pieces of architecture and evaluate them in desktop and CAVE environments. The architect is to do as much preparation work as possible with his CAAD program and only the final adjustments with the special VR tool.
keywords	CAAD, VR, Modelling, Spatial Experience
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	b0e7
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2000
title	The Re-Convergence of Art and Science: A Vehicle for Creativity
doi	https://doi.org/10.52842/conf.caadria.2000.491
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 491-500
summary	Ever-increasing complexity in product design and the need to deliver a cost-effective solution that benefits from a dynamic approach requires the employment and adoption of innovative design methods which ensure that products are of the highest quality and meet or exceed customers' expectations. According to Bronowski (1976) science and art were originally two faces of the same human creativity. However, as civilisation advances and works became specialised, the dichotomy of science and art gradually became apparent. Hence scientists and artists were born, and began to develop work that was polar opposite. The sense of beauty itself became separated from science and was confined within the field of art. This dichotomy existed through mankind's efforts in advancing civilisation to its present state. This paper briefly examines the relationship between art and science through the ages and discusses their relatively recent re-convergence. Based on this hypothesis, this paper studies the current state of the convergence between arts and sciences and examines the current relationship between the two by considering real world applications and products. The study of such products and their successes and impact they had in the marketplace due to their designs and aesthetics rather than their advanced technology that had partially failed them appears to support this argument. This text further argues that a re-convergence between art and science is currently occurring and highlights the need for accelerating this process. It is suggested that re-convergence is a result of new technologies which are adopted by practitioners that include effective visualisation and communication of ideas and concepts. Such elements are widely found today in multimedia and Virtual Environments (VEs) where such tools offer increased power and new abilities to both scientists and designers as both venture in each other's domains. This paper highlights the need for the employment of emerging computer based real-time interactive technologies that are expected to enhance the design process through real-time prototyping and visualisation, better decision-making, higher quality communication and collaboration, lessor error and reduced design cycles. Effective employment and adoption of innovative design methods that ensure products are delivered on time, and within budget, are of the highest quality and meet customer expectations are becoming of ever increasing importance. Such tools and concepts are outlined and their roles in the industries they currently serve are identified. Case studies from differing fields are also studied. It is also suggested that Virtual Reality interfaces should be used and given access to Computer Aided Design (CAD) model information and data so that users may interrogate virtual models for additional information and functionality. Adoption and appliance of such integrated technologies over the Internet and their relevance to electronic commerce is also discussed. Finally, emerging software and hardware technologies are outlined and case studies from the architecture, electronic games, and retail industries among others are discussed, the benefits are subsequently put forward to support the argument. The requirements for adopting such technologies in financial, skills required and process management terms are also considered and outlined.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	456a
authors	Alvarado, R.G., Parra, J.C., Vergara, R.L. and Chateau, H.B.
year	2000
title	Architectural References to Virtual Environments Design
doi	https://doi.org/10.52842/conf.ecaade.2000.151
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 151-155
summary	Based on a comparison between the perception of digital and real construction, the development of virtual systems and the review of additional sources, this paper states some differences between the design of virtual environments and architectural spaces. Virtual-reality technologies provide advanced capabilities to simulate real situations, and also to create digital worlds not referred to physical places, such as imaginary landscapes or environments devoted to electronic activities, like entertainment, learning or commerce. Some on-line services already use 3D-stages, resembling building halls and domestic objects, and several authors have mentioned virtual modeling as a job opportunity to architects. But it will argue in this paper that the design of those environments should consider their own digital characteristics. Besides, the use of virtual installations on networks impells a convergence with global media, like Internet or TV. Virtual environments can be a 3Devolution of communicational technologies, which have an increasing participation in culture, reaching a closer relationship to contemporary architecture.
keywords	Virtual Environments, Spatial Perception, Design Methodology
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	328d
authors	Bassanino, May Nahab and Brown, Andre
year	1999
title	Computer Generated Architectural Images: A Comparative Study
doi	https://doi.org/10.52842/conf.ecaade.1999.552
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 552-556
summary	This work is part of a long term research programme (Brown and Horton, 1992; Brown and Nahab, 1996; Bassanino, 1999) in which tests and studies have been carried out on various groups of people to investigate their reaction to, and interpretation of different forms of architectural representation. In the work described here a range of architectural schemes were presented using particular representational techniques and media. An experiment was then undertaken on two different groups; architects and lay people. They were presented with a number of schemes displayed using the various techniques and media. The responses are summarised and some comments are made on the effect of computers on perceiving architecture and on communicating architectural ideas arising from an analysis of the responses.
keywords	Subject, Image Type, Presentation Technique, Medium, SD Scales, Factors
series	eCAADe
email
last changed	2022/06/07 07:54

_id	1f5c
authors	Beesley, Philip and Seebohm, Thomas
year	2000
title	Digital Tectonic Design
doi	https://doi.org/10.52842/conf.ecaade.2000.287
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 287-290
summary	Digital tectonic design is a fresh approach to architectural design methodology. Tectonics means a focus on assemblies of construction elements. Digital tectonics is an evolving methodology that integrates use of design software with traditional construction methods. We see digital tectonic design as a systematic use of geometric and spatial ordinances, used in combination with details and components directly related to contemporary construction. The current approach will, we hope, lead to an architectural curriculum based on generative form making where the computer can be used to produce systems of forms algorithmically. Digital design has tended to remain abstract, emphasizing visual and spatial arrangements often at the expense of materials and construction. Our pursuit is translation of these methods into more fully realized physical qualities. This method offers a rigorous approach based on close study of geometry and building construction elements. Giving a context for this approach, historical examples employing systematic tectonic design are explored in this paper. The underlying geometric ordinance systems and the highly tuned relationships between the details in these examples offer design vocabularies for use within the studio curriculum. The paper concludes with a detailed example from a recent studio project demonstrating particular qualities developed within the method. The method involves a wide range of scales, relating large-scale gestural and schematic studies to detailed assembly systems. Designing in this way means developing geometric strategies and, in parallel, producing detailed symbols or objects to be inserted. These details are assembled into a variety of arrays and groups. The approach is analogous to computer-aided designÕs tradition of shape grammars in which systems of spatial relationships are used to control the insertion of shapes within a space. Using this approach, a three-dimensional representation of a building is iteratively refined until the final result is an integrated, systematically organized complex of symbols representing physical building components. The resulting complex offers substantial material qualities. Strategies of symbol insertions and hierarchical grouping of elements are familiar in digital design practice. However these strategies are usually used for automated production of preconceived designs. In contrast to thsse normal approaches this presentation focuses on emergent qualities produced directly by means of the complex arrays of symbol insertions. The rhyth
keywords	3D CAD Systems, Design Practice, 3D Design Strategies
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	c42a
authors	Bermudez, J., Agutter, J., Brent, L., Syroid, N., Gondeck-Becker, D., Westenskow, D., Foresti, S. and Sharir, Y.
year	2000
title	Cyberprint: Toward an Architecture of Being
doi	https://doi.org/10.52842/conf.acadia.2000.008
source	ACADIA Quarterly, vol. 19, no. 3, pp. 8-12
summary	This project involves the design, construction and performance of an “architecture of being” that expresses selfhood in virtual space and real time using: (1) physiological data as its building material, (2) architectural design as its expressive intent, (3) digital space as its medium, (4) screen projection as its enveloping and viewing technique, (5) user interactivity and performance as its partner, and (6) interdisciplinary collaborations among Architecture, Choreography, Modern Dance, Music, Bioengineering, Medicine and Computer Science as its creative and technical contexts. The paper presents the implementation of the cyberPRINT during a series of techno-media performances at the Rose Wagner Performing Art Center in Salt Lake City, USA, in May 2000. This work is believed to be the first of its kind in the world. The cyberPRINT is building a new area of creative inquiry in Architecture by means of collaborations with the Arts and Sciences.
keywords	Performance; Data Visualization; Interdisciplinary; Virtual; Architecture
series	ACADIA
email
last changed	2022/06/07 07:52

For more results click below: