Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 151

Reformat results as: short short into frame detailed detailed into frame

_id	b0e7
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2000
title	The Re-Convergence of Art and Science: A Vehicle for Creativity
doi	https://doi.org/10.52842/conf.caadria.2000.491
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 491-500
summary	Ever-increasing complexity in product design and the need to deliver a cost-effective solution that benefits from a dynamic approach requires the employment and adoption of innovative design methods which ensure that products are of the highest quality and meet or exceed customers' expectations. According to Bronowski (1976) science and art were originally two faces of the same human creativity. However, as civilisation advances and works became specialised, the dichotomy of science and art gradually became apparent. Hence scientists and artists were born, and began to develop work that was polar opposite. The sense of beauty itself became separated from science and was confined within the field of art. This dichotomy existed through mankind's efforts in advancing civilisation to its present state. This paper briefly examines the relationship between art and science through the ages and discusses their relatively recent re-convergence. Based on this hypothesis, this paper studies the current state of the convergence between arts and sciences and examines the current relationship between the two by considering real world applications and products. The study of such products and their successes and impact they had in the marketplace due to their designs and aesthetics rather than their advanced technology that had partially failed them appears to support this argument. This text further argues that a re-convergence between art and science is currently occurring and highlights the need for accelerating this process. It is suggested that re-convergence is a result of new technologies which are adopted by practitioners that include effective visualisation and communication of ideas and concepts. Such elements are widely found today in multimedia and Virtual Environments (VEs) where such tools offer increased power and new abilities to both scientists and designers as both venture in each other's domains. This paper highlights the need for the employment of emerging computer based real-time interactive technologies that are expected to enhance the design process through real-time prototyping and visualisation, better decision-making, higher quality communication and collaboration, lessor error and reduced design cycles. Effective employment and adoption of innovative design methods that ensure products are delivered on time, and within budget, are of the highest quality and meet customer expectations are becoming of ever increasing importance. Such tools and concepts are outlined and their roles in the industries they currently serve are identified. Case studies from differing fields are also studied. It is also suggested that Virtual Reality interfaces should be used and given access to Computer Aided Design (CAD) model information and data so that users may interrogate virtual models for additional information and functionality. Adoption and appliance of such integrated technologies over the Internet and their relevance to electronic commerce is also discussed. Finally, emerging software and hardware technologies are outlined and case studies from the architecture, electronic games, and retail industries among others are discussed, the benefits are subsequently put forward to support the argument. The requirements for adopting such technologies in financial, skills required and process management terms are also considered and outlined.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	86dc
authors	Aouad, G., and Price, A.D.F.
year	1993
title	An integrated system to aid the planning of concrete structures: introducing the system
source	The Int. Journal of Construction IT1(2), pp.1-14
summary	This paper reports on the development at Loughborough University of a CAD-based integrated model to aid the planning of in-situ concrete structures. The system development started after a review of the planning models currently available and after a detailed questionnaire survey undertaken amongst the top UK and US contractors on the current status of planning techniques and information technology. The main aim of this system is to automate the planning process of in-situ concrete structures using data generated by CAD systems. So far, the integration of a CAD system (AutoCAD 10) and a computerized scheduling system (Artemis 2000) has been achieved on a typical IBM-PC. This enables the generation of network plans using AutoCAD which are then automatically transferred to the Artemis system for time and cost analyses.Traditionally, construction planners are faced with many conventional drawings and documents which are used to re-extract information relevant to their planning processes. Such an approach can be very inefficient as it involves data double-handling and is often error prone. In addition, current computerized construction planning applications are little more than the automation of manual formulations of plans. For example, data are fed into the planning system and computations are performed using either CPM (Critical Path Method) or PERT (Programme Evaluation and Review Technique). However, data relating to the planning process such as activity lists, resources requirements and durations are not automatically generated within the system. It would thus seem logical to devise a CAD-based integrated planning model which accepts data in its electronic format and involves some integration of the traditional planning approach. This paper introduces the proposed CAD-based integrated planning model and describes its different components. In addition, it discusses the system functional specifications and summarizes the main benefits and limitations of such a model.
series	journal paper
last changed	2003/05/15 21:45

_id	1ee6
authors	Argumedo, C., Guerri, C., Rainero, C., Carmena, S., Lomónaco, H., María Gilli, C. and Del Rio, A.
year	2000
title	Restitución perspectiva mediante el uso de herramientas digitales para la confección deuna base de datos de obras arquitectónicas - (Perspective Restitution by means of the use of Digital Tools for the Preparation of a Data Base of Architectonic Works)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 188-190
summary	The work is developed applying the perspective restitution method, based on the photographic survey of buildings. It researches the accuracy selection of the instruments, that should be effective, easy to manage, low cost and it allow fast results so as to let us compile a digital graphic data bases of the chosen works. The aim of the project is to elaborate graphic documents not only from the paradigmatic works but also from domestic architecture, so important in the consolidation of city. The idea is to include new concepts about the use of digital devices and instruments. The emphasis is on the production of a low cost graphic documents, obtained with standard hardware and software used at our University. The architectural works selected belongs to the Rosario’s Rationalist heritage that have to be completed at the Municipal Archive.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	a136
authors	Blaise, J.Y., Dudek, I. and Drap, P.
year	1998
title	Java collaborative interface for architectural simulations A case study on wooden ceilings of Krakow
source	International Conference On Conservation - Krakow 2000, 23-24 November 1998, Krakow, Poland
summary	Concern for the architectural and urban preservation problems has been considerably increasing in the past decades, and with it the necessity to investigate the consequences and opportunities opened for the conservation discipline by the development of computer-based systems. Architectural interventions on historical edifices or in preserved urban fabric face conservationists and architects with specific problems related to the handling and exchange of a variety of historical documents and representations. The recent development of information technologies offers opportunities to favour a better access to such data, as well as means to represent architectural hypothesis or design. Developing applications for the Internet also introduces a greater capacity to exchange experiences or ideas and to invest on low-cost collaborative working platforms. In the field of the architectural heritage, our research addresses two problems: historical data and documentation of the edifice, methods of representation (knowledge modelling and visualisation) of the edifice. This research is connected with the ARKIW POLONIUM co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France) and the Institute HAiKZ of Kraków's Faculty of Architecture. The ARKIW programme deals with questions related to the use of information technologies in the recording, protection and studying of the architectural heritage. Case studies are chosen in order to experience and validate a technical platform dedicated to the formalisation and exchange of knowledge related to the architectural heritage (architectural data management, representation and simulation tools, survey methods, ...). A special focus is put on the evolution of the urban fabric and on the simulation of reconstructional hypothesis. Our contribution will introduce current ARKIW internet applications and experiences: The ARPENTEUR architectural survey experiment on Wie¿a Ratuszowa (a photogrammetrical survey based on an architectural model). A Gothic and Renaissance reconstruction of the Ratusz Krakowski using a commercial modelisation and animation software (MAYA). The SOL on line documentation interface for Kraków's Rynek G_ówny. Internet analytical approach in the presentation of morphological informations about Kraków's Kramy Bogate Rynku Krakowskiego. Object-Orientation approach in the modelling of the architectural corpus. The VALIDEUR and HUBLOT Virtual Reality modellers for the simulation and representation of reconstructional hypothesis and corpus analysis.
series	other
last changed	2003/04/23 15:14

_id	eabb
authors	Boeykens, St. Geebelen, B. and Neuckermans, H.
year	2002
title	Design phase transitions in object-oriented modeling of architecture
doi	https://doi.org/10.52842/conf.ecaade.2002.310
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 310-313
summary	The project IDEA+ aims to develop an “Integrated Design Environment for Architecture”. Its goal is providing a tool for the designer-architect that can be of assistance in the early-design phases. It should provide the possibility to perform tests (like heat or cost calculations) and simple simulations in the different (early) design phases, without the need for a fully detailed design or remodeling in a different application. The test for daylighting is already in development (Geebelen, to be published). The conceptual foundation for this design environment has been laid out in a scheme in which different design phases and scales are defined, together with appropriate tests at the different levels (Neuckermans, 1992). It is a translation of the “designerly” way of thinking of the architect (Cross, 1982). This conceptual model has been translated into a “Core Object Model” (Hendricx, 2000), which defines a structured object model to describe the necessary building model. These developments form the theoretical basis for the implementation of IDEA+ (both the data structure & prototype software), which is currently in progress. The research project addresses some issues, which are at the forefront of the architect’s interest while designing with CAAD. These are treated from the point of view of a practicing architect.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ec4d
authors	Croser, J.
year	2001
title	GDL Object
source	The Architect’s Journal, 14 June 2001, pp. 49-50
summary	It is all too common for technology companies to seek a new route to solving the same problem but for the most part the solutions address the effect and not the cause. The good old-fashioned pencil is the perfect example where inventors have sought to design-out the effect of the inherent brittleness of lead. Traditionally different methods of sharpening were suggested and more recently the propelling pencil has reigned king, the lead being supported by the dispensing sleeve thus reducing the likelihood of breakage. Developers convinced by the Single Building Model approach to design development have each embarked on a difficult journey to create an easy to use feature packed application. Unfortunately it seems that the two are not mutually compatible if we are to believe what we see emanating from Technology giants Autodesk in the guise of Architectural Desktop 3. The effect of their development is a feature rich environment but the cost and in this case the cause is a tool which is far from easy to use. However, this is only a small part of a much bigger problem, Interoperability. You see when one designer develops a model with one tool the information is typically locked in that environment. Of course the geometry can be distributed and shared amongst the team for use with their tools but the properties, or as often misquoted, the intelligence is lost along the way. The effect is the technological version of rubble; the cause is the low quality of data-translation available to us. Fortunately there is one company, which is making rapid advancements on the whole issue of collaboration, and data sharing. An old timer (Graphisoft - famous for ArchiCAD) has just donned a smart new suit, set up a new company called GDL Technology and stepped into the ring to do battle, with a difference. The difference is that GDL Technology does not rely on conquering the competition, quite the opposite in fact their success relies upon the continued success of all the major CAD platforms including AutoCAD, MicroStation and ArchiCAD (of course). GDL Technology have created a standard data format for manufacturers called GDL Objects. Product manufacturers such as Velux are now able to develop product libraries using GDL Objects, which can then be placed in a CAD model, or drawing using almost any CAD tool. The product libraries can be stored on the web or on CD giving easy download access to any building industry professional. These objects are created using scripts which makes them tiny for downloading from the web. Each object contains 3 important types of information: · Parametric scale dependant 2d plan symbols · Full 3d geometric data · Manufacturers information such as material, colour and price Whilst manufacturers are racing to GDL Technologies door to sign up, developers and clients are quick to see the benefit too. Porsche are using GDL Objects to manage their brand identity as they build over 300 new showrooms worldwide. Having defined the building style and interior Porsche, in conjunction with the product suppliers, have produced a CD-ROM with all of the selected building components such as cladding, doors, furniture, and finishes. Designing and detailing the various schemes will therefore be as straightforward as using Lego. To ease the process of accessing, sizing and placing the product libraries GDL Technology have developed a product called GDL Object Explorer, a free-standing application which can be placed on the CD with the product libraries. Furthermore, whilst the Object Explorer gives access to the GDL Objects it also enables the user to save the object in one of many file formats including DWG, DGN, DXF, 3DS and even the IAI's IFC. However, if you are an AutoCAD user there is another tool, which has been designed especially for you, it is called the Object Adapter and it works inside of AutoCAD 14 and 2000. The Object Adapter will dynamically convert all GDL Objects to AutoCAD Blocks during placement, which means that they can be controlled with standard AutoCAD commands. Furthermore, each object can be linked to an online document from the manufacturer web site, which is ideal for more extensive product information. Other tools, which have been developed to make the most of the objects, are the Web Plug-in and SalesCAD. The Plug-in enables objects to be dynamically modified and displayed on web pages and Sales CAD is an easy to learn and use design tool for sales teams to explore, develop and cost designs on a Notebook PC whilst sitting in the architects office. All sales quotations are directly extracted from the model and presented in HTML format as a mixture of product images, product descriptions and tables identifying quantities and costs. With full lifecycle information stored in each GDL Object it is no surprise that GDL Technology see their objects as the future for building design. Indeed they are not alone, the IAI have already said that they are going to explore the possibility of associating GDL Objects with their own data sharing format the IFC. So down to the dirty stuff, money and how much it costs? Well, at the risk of sounding like a market trader in Petticoat Lane, "To you guv? Nuffin". That's right as a user of this technology it will cost you nothing! Not a penny, it is gratis, free. The product manufacturer pays for the license to host their libraries on the web or on CD and even then their costs are small costing from as little as 50p for each CD filled with objects. GDL Technology has come up trumps with their GDL Objects. They have developed a new way to solve old problems. If CAD were a pencil then GDL Objects would be ballistic lead, which would never break or loose its point. A much better alternative to the strategy used by many of their competitors who seek to avoid breaking the pencil by persuading the artist not to press down so hard. If you are still reading and you have not already dropped the magazine and run off to find out if your favorite product supplier has already signed up then I suggest you check out the following web sites www.gdlcentral.com and www.gdltechnology.com. If you do not see them there, pick up the phone and ask them why.
series	journal paper
email
last changed	2003/04/23 15:14

_id	899f
authors	Papamichael, K., Pal, V., Bourassa, N., Loffeld, J. and Capeluto, I.G.
year	2000
title	An Expandable Software Model for Collaborative Decision-Making During the Whole Building Life Cycle
doi	https://doi.org/10.52842/conf.acadia.2000.019
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 19-28
summary	Decisions throughout the life cycle of a building, from design through construction and commissioning to operation and demolition, require the involvement of multiple interested parties (e.g., architects, engineers, owners, occupants and facility managers). The performance of alternative designs and courses of action must be assessed with respect to multiple performance criteria, such as comfort, aesthetics, energy, cost and environmental impact. Several stand-alone computer tools are currently available that address specific performance issues during various stages of a building’s life cycle. Some of these tools support collaboration by providing means for synchronous and asynchronous communications, performance simulations, and monitoring of a variety of performance parameters involved in decisions about a building during building operation. However, these tools are not linked in any way, so significant work is required to maintain and distribute information to all parties. In this paper we describe a software model that provides the data management and process control required for collaborative decision-making throughout a building’s life cycle. The requirements for the model are delineated addressing data and process needs for decision making at different stages of a building’s life cycle. The software model meets these requirements and allows addition of any number of processes and support databases over time. What makes the model infinitely expandable is that it is a very generic conceptualization (or abstraction) of processes as relations among data. The software model supports multiple concurrent users, and facilitates discussion and debate leading to decision-making. The software allows users to define rules and functions for automating tasks and alerting all participants to issues that need attention. It supports management of simulated as well as real data and continuously generates information useful for improving performance prediction and understanding of the effects of proposed technologies and strategies.
keywords	Decision Making, Integration, Collaboration, Simulation, Building Life Cycle, Software.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	diss_sola
id	diss_sola
authors	Sola-Morales, Pau
year	2000
title	Representation in Architecture: A Data Model for Computer-Aided Architectural Design
source	DDes Thesis, Harvard Design School, Cambridge, MA
summary	Traditional representation systems – including technical drawings, perspectives, models and photography – have historically been used by architects to communicate projectual ideas to other agents in the process, as well to communicate ideas to themselves and recording them for future reference. The increasing complexity of the projects, involving more agents in ever more distant locations; the need for a greater semantic richness to express all the subtleties of the technical, cost and styling details; and -- most importantly – the introduction of computers in every day practice, which enable powerful data generation and manipulation; all these factors together demand for a new representation system adapted to the new digital medium. Yet, traditional CAAD software packages do not offer a solution to any of these problems, for their data model is too simplified to model complex projects and ideas, and are based on geometrical representations of the built environment. This dissertation addresses the issue of computer representation of architecture, and tries to refocus the discussion from a “geometric representation of objects” to a “representation of relationships among objects.” After studying the nature of design, it is observed that objects in the built environment can be represented as patterns of relationships. Based on the object-oriented data model (OODM), which can capture such relationships, the research proposes a new data model and a new set of abstractions of architectural elements that represent the patterns of relationships among them. The resulting representations are networks of design concepts and intentions, hypertext-like structures conveying all the semantic richness of the architectural project, containing qualitative as well as quantitative information. It is analogous to a “digital writing” or “encoding” of architecture. Being stored in an OO, centralized, concurrent database, these object models can be shared and exchanged among design professionals, adding up to a universal computer-readable design representation system.
series	thesis:PhD
last changed	2005/09/09 12:58

_id	1f5c
authors	Beesley, Philip and Seebohm, Thomas
year	2000
title	Digital Tectonic Design
doi	https://doi.org/10.52842/conf.ecaade.2000.287
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 287-290
summary	Digital tectonic design is a fresh approach to architectural design methodology. Tectonics means a focus on assemblies of construction elements. Digital tectonics is an evolving methodology that integrates use of design software with traditional construction methods. We see digital tectonic design as a systematic use of geometric and spatial ordinances, used in combination with details and components directly related to contemporary construction. The current approach will, we hope, lead to an architectural curriculum based on generative form making where the computer can be used to produce systems of forms algorithmically. Digital design has tended to remain abstract, emphasizing visual and spatial arrangements often at the expense of materials and construction. Our pursuit is translation of these methods into more fully realized physical qualities. This method offers a rigorous approach based on close study of geometry and building construction elements. Giving a context for this approach, historical examples employing systematic tectonic design are explored in this paper. The underlying geometric ordinance systems and the highly tuned relationships between the details in these examples offer design vocabularies for use within the studio curriculum. The paper concludes with a detailed example from a recent studio project demonstrating particular qualities developed within the method. The method involves a wide range of scales, relating large-scale gestural and schematic studies to detailed assembly systems. Designing in this way means developing geometric strategies and, in parallel, producing detailed symbols or objects to be inserted. These details are assembled into a variety of arrays and groups. The approach is analogous to computer-aided designÕs tradition of shape grammars in which systems of spatial relationships are used to control the insertion of shapes within a space. Using this approach, a three-dimensional representation of a building is iteratively refined until the final result is an integrated, systematically organized complex of symbols representing physical building components. The resulting complex offers substantial material qualities. Strategies of symbol insertions and hierarchical grouping of elements are familiar in digital design practice. However these strategies are usually used for automated production of preconceived designs. In contrast to thsse normal approaches this presentation focuses on emergent qualities produced directly by means of the complex arrays of symbol insertions. The rhyth
keywords	3D CAD Systems, Design Practice, 3D Design Strategies
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	31d6
authors	Harfmann, Anton C. and Akins, Peter E.
year	2000
title	The Composite Building Sketch
doi	https://doi.org/10.52842/conf.acadia.2000.273
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 273-280
summary	This works in progress paper describes the development of an alternative method for teaching building technology using the composite sketch concept borrowed from police forensics. The composite sketch utilizes individual components and assemblies of construction in various combinations to explore the design implications of materials and connections on form and surface. To enhance the usefulness of the composite sketch, in-depth case studies of specific buildings are linked to the digital assemblies of the composite sketch so that students can see the basic concepts in actual buildings. The project currently models more than 500 combinations of components and includes approximately 200 catalogued images of buildings under construction.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	b8fe
authors	Rodgers, P.A., Green, G. and McGown, A.
year	2000
title	Using concept sketches to track design progress
source	Design Studies 21 (5), pp. 451-464
summary	Sketching is one of the most important activities in the design and development of new products. Designers produce sketches, from concept design ideas through to highly detailed representations of product artifacts, product sub-assemblies and so on, to communicate with themselves and with others. To this end, the focus of this paper is the description of a study of student designers at work in the early stages of design, with particular emphasis on the visible sketching component of the design process. The study has been carried out to firstly investigate the sketching activity and secondly to explore methods or techniques which might improve the efficiency of this activity. In particular, the paper describes a technique, based upon three types of operation, namely lateral transformations, vertical transformations and duplication, that occur between designer's sketches. These transformations can be used to help track the designer's thinking mode which, it is envisaged, will increase the efficiency of the sketching activity.
series	journal paper
email
last changed	2003/04/23 15:50

_id	9b44
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2000
title	The Importance of Virtual Environments in the Design of Electronic Games and Their Relevance to Architecture
doi	https://doi.org/10.52842/conf.ecaade.2000.181
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 181-185
summary	Ever increasing complexity in architectural design and the need to deliver a cost effective solution requires the employment and adoption of innovative design methods. Although technological changes have entered the field of architecture at a slower pace, the recent adoption of 3D modelling, Virtual Environment and multimedia represent significant changes in architectural design, visualisation and presentation. These now include tools for conceptualisation, design synthesis, design presentation, desktop publishing, animation, Internet and hypermedia authoring. Uddin argues that the major activities involved in the creative and dynamic process of architectural design deal with conceptualisation, visualisation and expression of alternative ideas through two-dimensional and three-dimensional model. This paper highlights the need for the employment of emerging computer based real-time interactive technologies that are expected to enhance the design process through better decision-making, higher quality communication and collaboration, error reduction, spatial awareness, interactive design and real-time visualisation.
keywords	CAD, Game Design, Virtual Reality, Virtual Environments, Virtual Prototyping, Internet Technologies, Architecture
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	63cb
authors	Ai, J., Tang, H. and Chen, Y.
year	2000
title	An Approach to Generate 3D Animation by Integrating Building Model into Site Pictures
doi	https://doi.org/10.52842/conf.caadria.2000.433
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 433-439
summary	The paper deals with a simple and cheap solution to represent 3Danimation of a future building at its actual site scenery. It is hopeful to be used in small or middle projects in order to get satisfy effect and save design cost.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	9384
authors	Burry, M., Datta, S. and Anson, S.
year	2000
title	Introductory Computer Programming as a Means for Extending Spatial and Temporal Understanding
doi	https://doi.org/10.52842/conf.acadia.2000.129
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 129-135
summary	Should computer programming be taught within schools of architecture? Incorporating even low-level computer programming within architectural education curricula is a matter of debate but we have found it useful to do so for two reasons: as an introduction or at least a consolidation of the realm of descriptive geometry and in providing an environment for experimenting in morphological time-based change. Mathematics and descriptive geometry formed a significant proportion of architectural education until the end of the 19th century. This proportion has declined in contemporary curricula, possibly at some cost for despite major advances in automated manufacture, Cartesian measurement is still the principal ‘language’ with which to describe building for construction purposes. When computer programming is used as a platform for instruction in logic and spatial representation, the waning interest in mathematics as a basis for spatial description can be readdressed using a left-field approach. Students gain insights into topology, Cartesian space and morphology through programmatic form finding, as opposed to through direct manipulation. In this context, it matters to the architect-programmer how the program operates more than what it does. This paper describes an assignment where students are given a figurative conceptual space comprising the three Cartesian axes with a cube at its centre. Six Phileban solids mark the Cartesian axial limits to the space. Any point in this space represents a hybrid of one, two or three transformations from the central cube towards the various Phileban solids. Students are asked to predict the topological and morphological outcomes of the operations. Through programming, they become aware of morphogenesis and hybridisation. Here we articulate the hypothesis above and report on the outcome from a student group, whose work reveals wider learning opportunities for architecture students in computer programming than conventionally assumed.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	4f24
authors	Cury Paraizo, Rodrigo
year	2000
title	CMC 2000 - A internet como ferramenta auxiliar do projeto de arquitetura (CMC 2000 - Internet as an Aiding Tool in Architectural Projects)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 72-74
summary	This paper briefly describes low cost and low maintenance web-based hyperdocument system, focused using an elementary school architecture project. It describes the experience of interaction with the project and its results. It also contains some observations on already available digital representation techniques for presenting such hyperdocuments, discussing their efficacy for given purposes. A great part of the website is available on the digital publication (CD-Rom).
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	3940
authors	Hall, Rick
year	1999
title	Realtime 3D visual Analysis of Very Large Models at Low Cost
doi	https://doi.org/10.52842/conf.ecaade.1999.437
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 437-441
summary	Computer based visualisation of 3D models in architecture has been possible for 20 years or more, and the software technology has steadily improved during this time so that now incredibly realistic images can be generated from any viewpoint in a model, and impressive fly through sequences can bring a model to life in ways previously not possible. Virtual reality is with us and multi-media enables us to present a finished design in increasingly seductive ways. However, these forms of output from a 3D model offer much more limited benefits during the design process and particularly on large complex models because they are so computing intensive and it often require many hours to produce just one image. Anything other than a small and relatively simple model cannot be viewed dynamically in real-time on a desktop PC of the type commonly used by architects in a design office. Until now the solution to this problem has meant investing in expensive design review hardware and software with its inherent need for trained, skilled labour. As a result, design review products are often viewed as a luxury or costly necessity.
keywords	Visual Analysis, Low Cost, 3D Modelling
series	eCAADe
last changed	2022/06/07 07:50

_id	84c2
authors	Hetem, V.
year	2000
title	Communication: computer aided engineering in the next millennium
source	Computer-Aided Design, Vol. 32 (5-6) (2000) pp. 389-394
summary	The next generation of computer aided tools should address the traditional role of engineering within a manufacturing organization, i.e. accurate communication ofmanufacturing specifications. Communication is the business of manufacturing engineering: translating design specifications into process plans and information such asestimating time and cost, process geometry creation and tolerance charting, determining tooling, and the recording of best practices. The integration of the product andprocess geometry with manufacturing knowledge is evolving through the use of computer aided process modeling and best practice sharing, to better serve production,which in turn delivers quality product at the right cost and tempo. These computer aided systems will have easy accessibility, inherent configuration control, and a"manufacturing language."
keywords	Process Modeling, Variant Planning, Manufacturing Engineering
series	journal paper
last changed	2003/05/15 21:33

_id	0014
authors	Hsu, W. and Liu, B.
year	2000
title	Conceptual design: issues and challenges
source	Computer-Aided Design, Vol. 32 (14) (2000) pp. 849-850
summary	Decisions made during conceptual design have significant influence on the cost, performance, reliability, safety and environmental impact of a product. It has been estimated that design decisions account for more than 75% of final product costs. It is, therefore, vital that designers have access to the right tools to support such design activities. In the early 1980s, researchers began to realize the impact of design decisions on downstream activities. As a result, different methodologies such as design for assembly, design for manufacturing and concurrent engineering, have been proposed. Software tools that implement these methodologies have also been developed. However, most of these tools are only applicable in the detailed design phase. Yet, even the highest standard of detailed design cannot compensate for a poor design concept formulated at the conceptual design phase. In spite of this, few CAD tools have been developed to support conceptual design activities. This is because knowledge of the design requirements and constraints during this early phase of a product's life cycle is usually imprecise and incomplete, making it difficult to utilize computer-based systems or prototypes. However, recent advances in fields such as fuzzy logic, computational geometry, constraints programming and so on have now made it possible for researchers to tackle some of the challenging issues in dealing with conceptual design activities. In this special issue, we have gathered together discussions on various aspects of conceptual design phase: from the capturing of the designer's intent, to modelling design constraints and solving them in an efficient manner, to verifying the correctness of the design.
series	journal paper
email
last changed	2003/05/15 10:54

_id	146a
authors	Johnson, Robert E.
year	2000
title	The Impact of E-Commerce on the Design and Construction Industry
doi	https://doi.org/10.52842/conf.acadia.2000.075
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 75-83
summary	Historically, the design and construction industry has been slow to innovate. As a result, productivity in the construction industry has declined substantially compared to other industries. Inefficiencies in this industry are well documented. However, the potential for cost savings and increased efficiency through the use of the Internet and e-commerce may not only increase the efficiency of the design and construction industry, but it may also significantly change the structure and composition of the industry. This is suggested because effective implementations of e-commerce technologies are not limited to one aspect of one industry. E-commerce may be most effective when it is thought of and applied to multi-industry enterprises and in a global context. This paper continues the exploration of a concept that we have been working on for several years, namely that “…information technology is evolving from a tool that incrementally improves ‘backoffice’ productivity to an essential component of strategic positioning that may alter the basic economics, organizational structure and operational practices of facility management organizations and their interactions with service providers (architects, engineers and constructors).” (Johnson and Clayton 1998) This paper will utilize the case study methodology to explore these issues as they are affecting the AEC/FM industry.
series	ACADIA
last changed	2022/06/07 07:52

_id	d5b3
authors	Knight, Michael and Brown, Andre
year	1999
title	Working in Virtual Environments through appropriate Physical Interfaces
doi	https://doi.org/10.52842/conf.ecaade.1999.431
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 431-436
summary	The work described here is aimed at contributing towards the debate and development relating to the construction of interfaces to explore buildings and their environs through virtual worlds. We describe a particular hardware and software configuration which is derived by the use of low cost games software to create the Virtual Environment. The Physical Interface responds to the work of other researchers, in this area, in particular Shaw (1994) and Vasquez de Velasco & Trigo (1997). Virtual Evironments might have the potential to be "a magical window into other worlds, from molecules to minds" (Rheingold, 1992), but what is the nature of that window? Currently it is often a translucent opening which gives a hazy and distorted (disembodied) view. And many versions of such openings are relatively expensive. We consider ways towards clearing the haze without too much expense, adapting techniques proposed by developers of low cost virtual reality systems (Hollands, 1995) for use in an architectural setting.
keywords	Virtual Environments, Games Software
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: