Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 749

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	15e4
authors	Sariyildiz, S., Stouffs, R. and Tunçer, B.
year	2000
title	Vision on ICT Developments for the Building Sector
doi	https://doi.org/10.52842/conf.acadia.2000.011
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 11-18
summary	The building sector is entering a new era. Developments in information and communication technology have an impact throughout the entire life cycle of a building, not only from a process and technical point of view but also from a creative design point of view. As a result of developments of advanced modeling software for architectural design, the gap between what the architect can envision and what the building technician or product architect can materialize is enlarging. Internet technology has already started to provide a closer link between the participants in the building process, their activities, knowledge, and information. Concurrent and collaborative engineering will be the future of building practice in respect to efficiency and quality improvement of this sector. The nature of the building process is complex, not only from a communication point of view, but also from the information of the number of participants, the spatial organization and the infrastructure etc. In the near future, soft computing techniques such as artificial neural networks, fuzzy logic, and genetic algorithms will make contributions to the problem solving aspects of the complex design process. This paper provides an overview of these and other future developments of information and communication technology (ICT) within the building sector.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	bbb9
authors	Blaise, Jean-Yves and Dudek, Iwona
year	1999
title	SOL: Spatial and Historical Web-Based Interface for On Line Architectural Documentation of Krakow's Rynek Gowny
doi	https://doi.org/10.52842/conf.ecaade.1999.700
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 700-707
summary	Our paper presents recent developments of a co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France), specialised in computer science and the HAiKZ Institute of Krakow's Faculty of Architecture, specialised in architectural heritage and conservation. Before undertaking any action to a listed building or interventions in its neighbourhood, it is vital to gain a clear understanding of the building in question. Numerous heterogeneous data detained by diverse institutions has to be handled. This process can be greatly eased by enhanced classification of the information. The development we present is a multidisciplinary platform independent information tool dedicated to education and research. SOL uses an http protocol centred computer architecture connecting a relational database, a VRML 2.0 representation module and a web search interface. It allows searches and updating of the database through a standard text based interface, a VRML 2.0 graphical module and a thematic interface. SOL is experienced on the urban fabric of the Main Square (Rynek Gówny) in Kraków. The choice of a web-centred development, both in the search and updating interface and in the representation module provides platform independence and distant access to the database, and enables successive contributions of students or researchers.
keywords	Web Interface, Database, Architectural Heritage Environment, Information Module, Historical Evolutions
series	eCAADe
email
more	http://alberti.gamsau.archi.fr
last changed	2022/06/07 07:52

_id	08ea
authors	Clayton, Mark J. and Vasquez de Velasco, Guillermo P. (Eds.)
year	2000
title	ACADIA 2000: Eternity, Infinity and Virtuality in Architecture
doi	https://doi.org/10.52842/conf.acadia.2000
source	Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8 / Washington D.C. 19-22 October 2000, 284 p.
summary	Eternity, time without end, infinity, space without limits and virtuality, perception without constraints; provide the conceptual framework in which ACADIA 2000 is conceived. It is in human nature to fill what is empty and to empty what is full. Today, thanks to the power of computer processing we can also make small what is too big, make big what is too small, make fast what is too slow, make slow what is too fast, make real what does not exist, and make our reality omni-present at global scale. These are capabilities for which we have no precedents. What we make of them is our privilege and responsibility. Information about a building flows past our keyboards and on to other people. Although we, as architects, add to the information, it originated before us and will go beyond our touch in time, space and understanding. A building description acquires a life of its own that may surpass our own lives as it is stored, transferred, transformed, and reused by unknown intellects, both human and artificial, and in unknown processes. Our actions right now have unforeseen effects. Digital media blurs the boundaries of space, time and our perception of reality. ACADIA 2000 explores the theme of time, space and perception in relation to the information and knowledge that describes architecture. Our invitation to those who are finding ways to apply computer processing power in architecture received overwhelming response, generating paper submissions from five continents. A selected group of reviewers recommended the publication of 24 original full papers out of 42 submitted and 13 short papers out of 30 submitted. Forty-two projects were submitted to the Digital Media Exhibit and 12 were accepted for publication. The papers cover subjects in design knowledge, design process, design representation, design communication, and design education. Fundamental and applied research has been carefully articulated, resulting in developments that may have an important impact on the way we practice and teach architecture in the future.
series	ACADIA
email
more	www.acadia.org
last changed	2022/06/07 07:49

_id	d11a
authors	Den Hartog, J. P. and Koutamanis, A.
year	2000
title	Teaching design simulation
doi	https://doi.org/10.52842/conf.ecaade.2000.197
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 197-200
summary	The democratization of information and communication technologies (ICT) has promoted integration of computing in the design studio and of design activities in the CAAD courses. In addition it has also shifted the focus of CAAD courses from technical skills and general theoretical issues to current, specific design issues, such as the relationship between geometric modeling and construction, design communication and design analysis. CAAD courses (especially advanced ones) increasingly attempt to introduce these issues and corresponding advanced ICT in a design context that outlines the possibilities of these technologies and the underlying computational design methodology and bring research closer to teaching. One such issue is design analysis, especially in the early design stages when many fundamental decisions are taken on the basis of incomplete and insecure information. Simulation provides the computational means for projecting building behaviour and performance. The paper describes the application of a specific simulation technique, computational fluid dynamics (CFD), for the analysis of airflow in and around buildings in the context of an advanced CAAD course. In this course students are required to design a multifunctional exposition building. Even though students are unfamiliar with the particular CFD system, as well as with part of the simulation subject matter, they are able to produce descriptions of their designs with effectiveness and efficiency.
keywords	Design Analysis, Simulation, CFD, Airflow
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	16fb
authors	Dokonal, W., Martens, B. and Ploesch, R.
year	2001
title	On the Borderline - Building a 3-D City Model with Students
doi	https://doi.org/10.52842/conf.ecaade.2001.410
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 410-416
summary	This paper describes ongoing experiences with the „digcity“ project at Graz University of Technology (Austria). It presents a different approach in creating a 3-D City Model compared to other urban modeling projects. The substantial input made by students defines the basic characteristic of this project. In this contribution the redefinition of the project management is described. An outline of the project itself has been presented already in previous papers and presentations (Dokonal et.al., 2000 and 2001). These papers are updated here and the latest developments in this project are presented.
keywords	Urban Modeling, 3-D Modeling, Architectural Education, Collaboration
series	eCAADe
email
last changed	2022/06/07 07:55

_id	53c8
authors	Donath, Dirk and Lömker, Thorsten Michael
year	2000
title	Illusion, Frustration and Vision in Computer-Aided Project Planning: A Reflection and Outlook on the Use of Computing in Architecture
doi	https://doi.org/10.52842/conf.acadia.2000.003
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 3-9
summary	This paper examines the progressive and pragmatic use of computers and CAAD systems in the architectural practice. With the aid of three scenarios, this paper will illustrate gainful implementation of computer aided project planning in architecture. The first scenario describes an actual situation of implementation and describes conceptual abortive developments in office organization as well as in software technology. Scenario two outlines the essential features of an integrated building design system and the efforts involved in its implementation in the architectural practice. It clearly defines preconditions for implementation and focuses on feasible concepts for the integration of different database management systems. A glance at paradigms of conceptual work currently under development will be taken. The third scenario deals with the structure and integration of innovative concepts and the responsibility the architect will bear with regard to necessary alterations in office and workgroup organization. A future-oriented building design system will be described that distinguishes itself from existing programs because of its modular, net-based structure. With reference to today’s situation in architectural offices and according to realizable improvements, this article will demonstrate courses for future IT-support on the basis of an ongoing research project. The presented project is part of the special research area 524 “Materials and Constructions for the Revitalization of Existing Buildings” which is funded by the Deutsche Forschungsgemeinschaft. It deals with the integration of various parties that are involved in the revitalization process of existing buildings as well as with the provision of adequate information within the planning process resting upon the survey of existing building substance. Additional concepts that might change the way an architect’s work is organized will also be presented. “Case-based-reasoning” methods will make informal knowledge available, leading to a digital memory of preservable solutions.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	2aca
authors	Faucher, Didier and Nivet, Marie-Laure
year	2000
title	Playing with design intents: integrating physical and urban constraints in CAD
source	Automation in Construction 9 (1) (2000) pp. 93-105
summary	Our work deals with the exploration of a universe of forms that satisfy some design intents. That is, we substitute a "generate and test" approach for a declarative approach in which an object is created from its properties. In this paper we present an original method that takes into account design intents relative to sunlight, visibility and urban regulation. First of all we study how current CAD tools have considered these properties until now. Our conclusion is that the classical design/simulation/analysis process does not suit design practices, especially in the early stages. We think that an improved CAD system should offer the architect the option of manipulating abstract information such as design intents. We define an intent as a conceptual expression of constraints having an influence on the project. For instance, a visual intent will be stated with no reference to vision geometry: "from this place, I want to see the front of the new building". We show how to represent each of these constraints with a 3D volume associated to some characteristics. If some solutions exist, we are sure that they are included in these volumes. For physical phenomena we compute the volume geometry using the principles of inverse simulation. In the case of urban regulation we apply deduction rules. Design intents are solved by means of geometrical entities that represent openings or obstructions in the project. Computing constraint volumes is a way of guiding the architect in his exploration of solutions. Constraint volumes are new spaces that can restore the link between form and phenomenon in a CAD tool. Our approach offers the designer the possibility of manipulating design intents.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ga0008
id	ga0008
authors	Koutamanis, Alexander
year	2000
title	Redirecting design generation in architecture
source	International Conference on Generative Art
summary	Design generation has been the traditional culmination of computational design theory in architecture. Motivated either by programmatic and functional complexity (as in space allocation) or by the elegance and power of representational analyses (shape grammars, rectangular arrangements), research has produced generative systems capable of producing new designs that satisfied certain conditions or of reproducing exhaustively entire classes (such as all possible Palladian villas), comprising known and plausible new designs. Most generative systems aimed at a complete spatial design (detailing being an unpopular subject), with minimal if any intervention by the human user / designer. The reason for doing so was either to give a demonstration of the elegance, power and completeness of a system or simply that the replacement of the designer with the computer was the fundamental purpose of the system. In other words, the problem was deemed either already resolved by the generative system or too complex for the human designer. The ongoing democratization of the computer stimulates reconsideration of the principles underlying existing design generation in architecture. While the domain analysis upon which most systems are based is insightful and interesting, jumping to a generative conclusion was almost always based on a very sketchy understanding of human creativity and of the computer's role in designing and creativity. Our current perception of such matters suggests a different approach, based on the augmentation of intuitive creative capabilities with computational extensions. The paper proposes that architectural generative design systems can be redirected towards design exploration, including the development of alternatives and variations. Human designers are known to follow inconsistent strategies when confronted with conflicts in their designs. These strategies are not made more consistent by the emerging forms of design analysis. The use of analytical means such as simulation, couple to the necessity of considering a rapidly growing number of aspects, means that the designer is confronted with huge amounts of information that have to be processed and integrated in the design. Generative design exploration that can combine the analysis results in directed and responsive redesigning seems an effective method for the early stages of the design process, as well as for partial (local) problems in later stages. The transformation of generative systems into feedback support and background assistance for the human designer presupposes re-orientation of design generation with respect to the issues of local intelligence and autonomy. Design generation has made extensive use of local intelligence but has always kept it subservient to global schemes that tended to be holistic, rigid or deterministic. The acceptance of local conditions as largely independent structures (local coordinating devices) affords a more flexible attitude that permits not only the emergence of internal conflicts but also the resolution of such conflicts in a transparent manner. The resulting autonomy of local coordinating devices can be expanded to practically all aspects and abstraction levels. The ability to have intelligent behaviour built in components of the design representation, as well as in the spatial and building elements they signify, means that we can create the new, sharper tools required by the complexity resulting from the interpretation of the built environment as a dynamic configuration of co-operating yet autonomous parts that have to be considered independently and in conjunction with each other. P.S. The content of the paper will be illustrated by a couple of computer programs that demonstrate the princples of local intelligence and autonomy in redesigning. It is possible that these programs could be presented as independent interactive exhibits but it all depends upon the time we can make free for the development of self-sufficient, self-running demonstrations until December.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	53c6
authors	Mardaljevic, John
year	2000
title	Daylight Simulation: Validation, Sky Models and Daylight Coefficients
source	De Montfort University, Leicester, UK
summary	The application of lighting simulation techniques for daylight illuminance modelling in architectural spaces is described in this thesis. The prediction tool used for all the work described here is the Radiance lighting simulation system. An overview of the features and capabilities of the Radiance system is presented. Daylight simulation using the Radiance system is described in some detail. The relation between physical quantities and the lighting simulation parameters is made clear in a series of progressively more complex examples. Effective use of the inter-reflection calculation is described. The illuminance calculation is validated under real sky conditions for a full-size office space. The simulation model used sky luminance patterns that were based directly on measurements. Internal illuminance predictions are compared with measurements for 754 skies that cover a wide range of naturally occurring conditions. The processing of the sky luminance measurements for the lighting simulation is described. The accuracy of the illuminance predictions is shown to be, in the main, comparable with the accuracy of the model input data. There were a number of predictions with low accuracy. Evidence is presented to show that these result from imprecision in the model specification - such as, uncertainty of the circumsolar luminance - rather than the prediction algorithms themselves. Procedures to visualise and reduce illuminance and lighting-related data are presented. The ability of sky models to reproduce measured sky luminance patterns for the purpose of predicting internal illuminance is investigated. Four sky models and two sky models blends are assessed. Predictions of internal illuminance using sky models/blends are compared against those using measured sky luminance patterns. The sky model blends and the Perez All-weather model are shown to perform comparably well. Illuminance predictions using measured skies however were invariably better than those using sky models/blends. Several formulations of the daylight coefficient approach for predicting time varying illuminances are presented. Radiance is used to predict the daylight coefficients from which internal illuminances are derived. The form and magnitude of the daylight coefficients are related to the scene geometry and the discretisation scheme. Internal illuminances are derived for four daylight coefficient formulations based on the measured luminance patterns for the 754 skies. For the best of the formulations, the accuracy of the daylight coefficient derived illuminances is shown to be comparable to that using the standard Radiance calculation method. The use of the daylight coefficient approach to both accurately and efficiently predict hourly internal daylight illuminance levels for an entire year is described. Daylight coefficients are invariant to building orientation for a fixed building configuration. This property of daylight coefficients is exploited to yield hourly internal illuminances for a full year as a function of building orientation. Visual data analysis techniques are used to display and process the massive number of derived illuminances.
series	thesis:PhD
email
more	http://www.iesd.dmu.ac.uk/~jm/thesis/
last changed	2003/02/12 22:37

_id	899f
authors	Papamichael, K., Pal, V., Bourassa, N., Loffeld, J. and Capeluto, I.G.
year	2000
title	An Expandable Software Model for Collaborative Decision-Making During the Whole Building Life Cycle
doi	https://doi.org/10.52842/conf.acadia.2000.019
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 19-28
summary	Decisions throughout the life cycle of a building, from design through construction and commissioning to operation and demolition, require the involvement of multiple interested parties (e.g., architects, engineers, owners, occupants and facility managers). The performance of alternative designs and courses of action must be assessed with respect to multiple performance criteria, such as comfort, aesthetics, energy, cost and environmental impact. Several stand-alone computer tools are currently available that address specific performance issues during various stages of a building’s life cycle. Some of these tools support collaboration by providing means for synchronous and asynchronous communications, performance simulations, and monitoring of a variety of performance parameters involved in decisions about a building during building operation. However, these tools are not linked in any way, so significant work is required to maintain and distribute information to all parties. In this paper we describe a software model that provides the data management and process control required for collaborative decision-making throughout a building’s life cycle. The requirements for the model are delineated addressing data and process needs for decision making at different stages of a building’s life cycle. The software model meets these requirements and allows addition of any number of processes and support databases over time. What makes the model infinitely expandable is that it is a very generic conceptualization (or abstraction) of processes as relations among data. The software model supports multiple concurrent users, and facilitates discussion and debate leading to decision-making. The software allows users to define rules and functions for automating tasks and alerting all participants to issues that need attention. It supports management of simulated as well as real data and continuously generates information useful for improving performance prediction and understanding of the effects of proposed technologies and strategies.
keywords	Decision Making, Integration, Collaboration, Simulation, Building Life Cycle, Software.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	4ba2
authors	Sariyildiz, Sevil
year	2000
title	ICT influence on Spatial Planning, Building and the Built Environment
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 61-63
summary	The building sector is entering a new era. Developments in ICT have an impact throughout the entire life cycle of a building and the built environment. Through changes in daily life it will influence; the spatial planning, the urban structure of the future, our cities and the living environment. It shows already its influence in our way of living, our habits. The gap between creative design, which is done by means of advanced modelling software and the building technical aspect of designs, is getting bigger. ICT and Internet technology provide a closer link between the participants in the building process, their activities, knowledge, and information. Collaboration and communication within ICT techniques will be the future of the building. This paper provides a vision on the influences of the future ICT developments in spatial planning, architecture in general and focuses on the influences of the building sector in the above-mentioned fields.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	c51f
authors	Voigt, A., Walchhofer, H.P. and Linzer, H.
year	2000
title	City Experimental Lab
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 143-146
summary	The present contribution deals with the required scale of performances regarding an adequate simulation environment for recent and future challenges of urban development planning based on the concept “City Experimental Lab, CEL”. This paper issues concrete project experience covering the capital city of Upper Austria, Linz. Such CEL could and should act as an “expert system” in the preliminary stages of decision-finding, making available all particulars regarding decisions to the politicians, the planning administration, outside advisors and particularly to the citizens concerned in the suited present-day manner. It could be used for work sessions of planning- or design councils, expert hearings, for the continuous information of citizens on present planning work at the various degrees of concreteness and commitment, etc.. Thus those possibilities are to be enhanced which turn the present city configuration into a virtual experience by integrating visions, utopias and the future developments.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ddssar0213
id	ddssar0213
authors	De Groot, Ellie and Paule, Bernard
year	2002
title	DIAL-Europe: New Functionality’s for an Integrated Daylighting Design Tool
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The European project DIAL-Europe started in April 2000 and intends to enhance and to enlarge the capabilities of the LesoDIAL software. The aim of this “Swiss” tool was to give architects relevant information regarding the use of daylight, at the very first stage of the design process. DIAL-Europe focuses on European standards and climatic data. Further, a Heating & Cooling evaluation module and an Artificial Lighting module will be added. The objective of the Heating & Cooling module is to indicate the implications of the user’s design on heating and cooling energy and on thermal comfort.The objective of Artificial Lighting module is to develop a tool that will give an estimation of illuminance values on the work plane and provide guidance on qualitative aspects and visual comfort as well as on switching control and integration with daylight based on generic light sources and luminaires. Furthermore, the scope of the examples of simulated rooms will be increased in order to allow the user to compare their design with more similar cases. This paper will present the state of achievement and give an overview of the first version of the DIAL-Europe software, which will beavailable at the beginning of 2002.
series	DDSS
last changed	2003/08/07 16:36

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	01c0
authors	Af Klercker, Jonas
year	2000
title	Modelling for Virtual Reality in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2000.209
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 209-213
summary	CAAD systems are using object modelling methods for building databases to make information available. Object data must then be made useful for many different purposes in the design process. Even if the capacity of the computer will allow an almost unlimited amount of information to be transformed, the eye does not make the transformations in the same “simple” mathematical way. Trained architects have to involve in an inventive process of finding ways to “harmonize” this new medium with the human eye and the architect’s professional experience. This paper will be an interimistic report from a surveying course. During the spring semester 2000 the CAAD division of TU-Lund is giving a course “Modelling for VR in Architecture”. The students are practising architects with experience from using object modelling CAAD. The aims are to survey different ways to use available hard- and software to create VR-models of pieces of architecture and evaluate them in desktop and CAVE environments. The architect is to do as much preparation work as possible with his CAAD program and only the final adjustments with the special VR tool.
keywords	CAAD, VR, Modelling, Spatial Experience
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	456a
authors	Alvarado, R.G., Parra, J.C., Vergara, R.L. and Chateau, H.B.
year	2000
title	Architectural References to Virtual Environments Design
doi	https://doi.org/10.52842/conf.ecaade.2000.151
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 151-155
summary	Based on a comparison between the perception of digital and real construction, the development of virtual systems and the review of additional sources, this paper states some differences between the design of virtual environments and architectural spaces. Virtual-reality technologies provide advanced capabilities to simulate real situations, and also to create digital worlds not referred to physical places, such as imaginary landscapes or environments devoted to electronic activities, like entertainment, learning or commerce. Some on-line services already use 3D-stages, resembling building halls and domestic objects, and several authors have mentioned virtual modeling as a job opportunity to architects. But it will argue in this paper that the design of those environments should consider their own digital characteristics. Besides, the use of virtual installations on networks impells a convergence with global media, like Internet or TV. Virtual environments can be a 3Devolution of communicational technologies, which have an increasing participation in culture, reaching a closer relationship to contemporary architecture.
keywords	Virtual Environments, Spatial Perception, Design Methodology
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	ddssar0004
id	ddssar0004
authors	Bignon, J.-C., Halin, G. and Nakapan, W.
year	2000
title	Building product information search by images
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Building product information is required during the architectural design and technical design. The common access to the technical information system is the multi-criteria search mode. This search mode is adapted to the situation where an architect has a precise demand of information. But most of the time, the architect looks for ideas and wants to obtain many illustrations of product uses. Therefore, the system has to propose another search mode adapted to the situation where the demand is still fuzzy. Considering that the architect has the capacity to think with image and that an image can generate easily ideas, then a search by images seems to be suitable to the situation where an architect looks for ideas. The web is an inexhaustible resource of images we can exploit to provision an image database on a specific area. The system we propose allows making building product information search with images extracted from the web. This article presents the method used to extract images from web sites of French building product companies and how these images are used in an interactive and progressive image retrieval process.
series	DDSS
last changed	2003/11/21 15:16

For more results click below: