Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 138

Reformat results as: short short into frame detailed detailed into frame

_id	ff1d
authors	Barki, José
year	2000
title	Representação Digital e Projeto de Arquitetura (Digital Representation and Architectural Design)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 120-122
summary	The paper is focused around a critical discussion of the digital representation and the architectural design process. Digital technology is now widely accepted and computers are causing a profound impact in the way reality and artificial objects are described and represented. Computers are now transforming skills, design processes, production processes and organizations. However, the evidence suggests that there are no fundamental changes in the architectural design process. It is acknowledged that the design process in architecture goes through representations and entails two altering phases: one generating tentative possibilities and hypothesis, and another of testing and evaluation. Based on this discussion a new way of using digital technology in architectural conception and design is suggested.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	d1a6
authors	Corona Martínez, A., Vigo, L. and Folchi, A.
year	2001
title	SEMINARIO/TALLER DE INVESTIGACION PROYECTUAL ESTRUCTURA DE TALLER ACTIVO PARA LA ENSEÑANZA E INVESTIGACIÓN PROYECTUAL ARQUITECTÓNICA ASISTIDO POR TÉCNOLOGÍAS DIGITALES (Research Seminar/Workshop on the Structure of Active Design Studios for Training and Research on Computer Aided Design)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 227-228
summary	In a previous paper (SiGradi 2000) we presented a design approach based upon the architectural research that regarded digital technologies as a subordinated tool to architectural design. From that starting point and from various research experiences, we have re-oriented certain guidelines and latter developed specific techniques that can be used both for teaching and for the professional practice of architecture. Through the use of paradigmatic and hermeneutic techniques developed ad hoc, architectural projects are developed in a three-stage sequence: a) development of a narrative framework; b) analysis based on object oriented programming thechniques; and c) digital development of the preliminary design. We believe that the positive aspects of the inclusion of these idea-centered techniques to the digital realm unifies and extends the architectural knowledge and strengthens its conception.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	sigradi2007_af103
id	sigradi2007_af103
authors	Juarez Moara, Santos Franco; Luciana Silva Salgado
year	2007
title	Conception and analysis of structural system of membrane in 3DS Max and SAP2000 [Concepção e análise de sistema estrutural de membrana em 3DS Max e SAP2000]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 58-63
summary	This paper presents the limitations and the potentialities of the joint job of the programs 3DS MAX and SAP2000 in the conception and analysis of structural system of membrane. The modeling for method of the dependent surfaces of curves NURBS was compared with surfaces defined for mathematical expressions in 3DS MAX; the creative potentialities of the clones, the stacks of modifiers and extension MATH MAX had been collated with the restrictions of project, as well as presented data-exchange procedures for simulation of efforts in SAP2000.
keywords	CAE; Membrane; 3DS Max; Math Max; SAP 2000
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	2720
authors	Magyar, Peter and Temkin, Aron
year	2000
title	Developing an Algorithm for Topological Transformation
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 203-205
summary	This research intends to test the architectural application of Jean Piaget’s clinical observations, described in the book: The Child’s Conception of Space (Piaget, 1956), according to which topology is an ordering discipline, active in the human psyche. Earlier attempts, based on the principles of graph-theory, were able to cover only a narrow aspect of spatial relations, i.e. connectivity, and were mostly a-perceptional, visually mute. The “Spaceprint” method, explained and illustrated in co-author’s book: Thought Palaces (Magyar, 1999), through dimensional reduction, investigates volumetric, 3D characteristics and relationships with planar 2D configurations. These configurations, however, represent dual values: they are simultaneously the formal descriptors of both finite matter and (fragments of) infinite space. The so- called “Particular Spaceprint”, as a tool of design development in building, object, or urban scales, with the help of digital technology, could express - again simultaneously - qualities of an idea-gram and the visual, even tactile aspects of material reality. With topological surface-transformations, the “General Spaceprints”, these abstract yet visually active spatial formulas can be obtained.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	diss_cole
id	diss_cole
authors	Cole, R.J.
year	2000
title	The Management and Visualisation of Document Collections Using Formal Concept Analysis
source	Griffith University, Australia
summary	This thesis proposes a methodology, notation/theory, and software framework for organising documents using formal concept analysis. The documents are organised for the purposes of retrieval and analysis using background information in the form of a taxonomy of terms. An emphasis is placed on the development of a methodology that employs scalable computer programs to assist humans in the process of organisation, retrieval and analysis of document collections.The text retrieval community has also been concerned with the organisation of documents. The work outlined in this thesis makes use of the results of the text retrieval community at its lowest layer. Above this layer formal concept analysis is used as a mechanism to allow users to organise document collections using views determined by small numbers of attributes. These views, also known as scales, can make a mixture of coarse and speci c distinctions between documents, and are either selected or created by the users to make precisely the distinctions between documents that are important to their current tasks.The primary tool for the presentation of the results of formal concept analysis is a line diagram. The e ectiveness of the presentation of information contained in a line diagram is heavily dependent on the quality of the diagram. To support users in arriving at a quality diagram for a newly created view, graph drawing algorithms are adapted to the special case of determining a good layout for a concept lattice. This task is di erent from traditional graph layout problems because lattices exhibit a high degree of structure which should be exploited and made evident in the nal diagram. A new layout algorithm is proposed that combines a layered diagram approach and an additive diagram methodology. This new hybrid algorithm is shown to produce better diagrams than other adapted graph drawing algorithms.
series	thesis:PhD
more	http://www.kvocentral.com/
last changed	2003/11/28 07:36

_id	0b3e
authors	Cybis Pereira, A.T., Ulbricht, V.R., Cybis, W., Tissiani, G. Palubiack Marinho, J.E., Sousa de Miranda, D.C., Rbornmamm, R. and Canto, A.
year	2000
title	Supervirtual: Desenvolvimento do Design de uma Interface em 3D para Comércio na Internet - (Supervirtual: Design Development of an On-Line Trading 3-D Interface)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 328-330
summary	The paper presents part of a research developed for the discipline of Ergonomics of Interfaces of the program of Post-Graduation of the Engineering of Production of UFSC. The research explores the approaches that should have an interface drawn for to the sale of products by the Internet in three dimensions, suggesting a complete storyboard. The design of the interface intends to assist to all the normative approaches, looking for the increase of the usability of the future system. Besides, it also lifts subjects on the advantages and disadvantages of the electronic trade in virtual media for the Internet and the possible approaches to institute norms to its graphic design, looking for the functionality and the aesthetics of the sailing and presentation of the content in 3D.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	cdcd
authors	De Amorim, Arivaldo Leão
year	2000
title	Linguagem, Informação e Representação do Espaço (Language, Information and Space Representation)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 90-92
summary	This paper presents a brief project process and representation techniques retrospective along the history, discussing the technologies used to support this process and evaluating its application, considering the practical needs and requirements that should be assisted by them in each moment of the humanity’s development, showing the interdependence relationship among the available project tools and the resultant products. It discusses a range of computational and information technologies that are potentially useful for the project process and could indeed contribute for the product improvement and for the process rationalization. The use of “new technologies” in the different phases and stages of the project process are discussed. Finally, it stands out the attention for the configuration of a new project language based in the massive use of computational technologies, as a tool capable to assist the current demands imposed by the society that comprehends: quality, productivity, competitiveness and others actual paradigms.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	988d
authors	Russell, Peter and Forgber, Uwe
year	2000
title	The E-Talier: Inter-university Networked Design Studios
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 45-50
doi	https://doi.org/10.52842/conf.ecaade.2000.045
summary	The widespread infiltration of internet based variations of traditional areas of society (e-commerce, e-business, e-mail etc.) will not spare the halls of academia in its propagation. The term courseware is well nigh 20 years old and considerable research and development has been done in bringing network based distributed courses to university consortiums including those in architecture and civil engineering. Indeed, the European Commission has recently approved funding for a 3-year web-based virtual university of architecture and construction technology: the WINDS project led by the University of Ancona. Such attempts to create e-courses are largely an extension of typical courseware where the syllabus is quantified and divided into lessons for use by the students alone or in conjunction with their tutors and professors. This is quite adequate in conveying the base knowledge of the profession. However, the tenants of being an architect or engineer involve the deft use of that unwieldy named and deliciously imprecise tool called "design". Teaching design sooner or later involves the design studio: a pedagogically construed environment of simulation intended to train, not teach the skills of designing. This is fundamentally different from normal courseware. A network based design studio (Etalier) must be able to reflect the nature of learning design. Design studios typically involve specifically chosen design problems, researched supporting information to assist design decisions, focussed discussions, individual consultation and criticism, group criticism, public forums for presentation discussion and criticism as well as a myriad of informal undocumented communication among the students themselves. So too must an Etalier function. Essentially, it must allow collaboration through communication. Traditional barriers to collaboration include language, culture (both national and professional) and distance. Through the internet's capricious growth and the widespread use of English as a second language, the largest hurdle to attaining fruitful collaboration is probably cultural. In the case of an Etalier in a university setting, the cultural difficulties arise from administrative rules, the pedagogical culture of specific universities and issues such as scheduling and accreditation. Previous experiments with virtual design studios have demonstrated the criticality of such issues. The proposed system allows participating members to specify the degree and breadth with which they wish to partake. As opposed to specifying the conditions of membership, we propose to specify the conditions of partnership. Through the basic principal of reciprocity, issues such as accreditation and work load sharing can be mitigated. Further, the establishment of a studio market will allow students, tutors and professors from participating institutions to partake in studio projects of their choosing in accordance with their own constraints, be they related to schedule, expertise, legal or other matters. The paper describes these mechanisms and some possible scenarios for collaboration in the Etalier market.
keywords	e-Studio, Virtual Design Studio, Courseware, CSCW
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:56

_id	792a
authors	Blaschke, Thomas and Tiede, Dirk
year	2003
title	Bridging GIS-based landscape analysis/modelling and 3D-simulation.Is this already 4D?
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Several studies have used remote sensing to map patterns of e.g. deforestation or to analyse the rates of land use change. Thesestudies have proven useful for interpreting the causes of urbanization, deforestation etc. and the impact of such changes on theregion. Monitoring of change (e.g. deforestation or reforestation) is frequently perceived as one of the most important contributionsof remote sensing technology to the study of global ecological and environmental change (Roughgarden et al. 1991). Manyresearchers believe that the integration of remote sensing techniques within analysis of environmental change is essential if ecologistsare to meet the challenges of the future, specifically issues relating to global change; however, in practice, this integration has so farbeen limited (Griffiths & Mather 2000). Considerable difficulties are encountered in linking, on the one hand, the biologies oforganisms and the ecologies of populations to the fluxes of material and energy quantifiable at the level of ecosystems. In this paper,we concentrate on the methodological aspects of the delineation of landscape objects and touch the ecological application onlysuperficially but we elucidate the potential of the proposed methodology for several ecological applications briefly.
series	other
email
last changed	2003/11/21 15:16

_id	8805
authors	Flemming, U., Erhan, H.I. and Ozkaya, I.
year	2001
title	Object-Oriented Application Development in CAD
source	Technical Report 48-01-01. Pittsburgh, PA: Carnegie Mellon University, Institute of Complex Engineered Systems
summary	This report describes a graduate interdisciplinary course offered to students in the graduate program of the School of Architecture at Carnegie Mellon and related departments in fall 2000. The motivation was the realization that when commercial CAD (Computer-Aided Design) systems recently switched from procedural application programming languages to object-oriented ones, third-party application must undergo a significant cognitive retooling"; i. e. they must know more than the syntax and semantics of the new programming language to be used and must be able to employ appropriate software development strategies that are appropriate for the new paradigm. especially with respect to the importance of modeling, a distinguishing characteristic of object-oriented programming. The goal of the course was (a) to introduce and test strategies of object-oriented application development in general and in the context of MicroStation, a state-of-the-art commercial CAD package; (b) to develop-as a course team project-an interesting application that gives students practice with these strategies and team work; and (c) to document our approach and findings so that others can learn from them. The strategies introduced were the use-case approach of Jacobson et al. and the complementary object-modeling tools of Rumbaugh that were recently integrated into the Unified Modeling Language UML. The software platform supporting the course comprised MicroStation, JMDL (a superset of Java) and ProjectBank on the CAD side and RationalRose on the modeling side. The application developed by students in the course supports the generation of drawings for remodeling projects from a set of dgn files describing the existing state of the building to be remodeled. The course was supported by a grant and in-kind contributions from Bentley with matching funds from the Pennsylvania Infrastructure Technology Alliance (PITA)."
series	report
email
last changed	2003/04/23 15:50

_id	ecaade2007_162
id	ecaade2007_162
authors	Ramirez, Joaquin; Russell, Peter
year	2007
title	Second City
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 359-365
doi	https://doi.org/10.52842/conf.ecaade.2007.359
summary	In the era of communication, the participation in internet-communities has grown to become a motor for innovation in software and community platforms. The paper describes the hypothesis that, by creating a virtual city (or a second city) a new type of social, economic and scientific network is established, which is supported through visual communication technologies. The various users bring, per se, their own intrinsic motivation and requirements to the system. Nonetheless, a personal identification with a city/neighbourhood/house/apartment can be used to awake awareness and to foster participation. This is especially important when dealing with the city inhabitants. City modelling itself has been carried out for over a decade. Projects such as the city model of Graz have shown how city models can be established so as to be scalable for new information (Dokonal et al 2000). Furthermore, these city models have been used in the education of future architects and urban planners. The project described here moves in the opposite direction: the model moves out of the classroom to an interdisciplinary city-model-platform. The work described here is the conceptual model for a multi-dimensional data set that models the city. This has spawned a host of other projects using the model as a foundation for further interactivity development and the extension of the model itself. The paper describes the structure of the conceptual model and the first experience of incorporating diverse projects such those mentioned above. The model also is structured so as to be compatible with the XML standards being developed for city information (CityGML). The goal of the project is to create a data set describing the city that not only describes the geometry, but also the history (including planned histories) and nature of the city. In contrast to virtual realities, which attempt to create a separate world (e.g. Second Life), the Second City is intended as an interdisciplinary repository for the geometrical, historical and cultural information of the city.
keywords	City modelling, virtual environments, web 2.0
series	eCAADe
email
last changed	2022/06/07 08:00

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	41e5
authors	Abendroth, M., Decock, J. and Mestaoui, N.
year	2000
title	O_1:// the hypertextu(r)al matrix
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 75-76
summary	Founded in 1995 LAB[au], laboratory for architecture and urbanism, links theoretic research LAB[a+u] to concrete works of conception and realisations LA.BAU. LAB[au] elaborates a “hyperdesign” investigating the implications of new technologies of communication and computation in spatiotemporal and social processes and their forms of representation as architecture and urbanism. The transposition of the hypertext model to architectural and urban concepts question the mutation of the spatial and semantic construct of space. The definition of architecture as a code is based on “glocal” systems according to the processes of computation and communication.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddssar0003
id	ddssar0003
authors	Bax, Th., Trum, H. and Nauta, D.jr.
year	2000
title	Implications of the philosophy of Ch. S. Peirce for interdisciplinary design: developments in domain theory
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Subject of this paper is the establishment of a connection between categorical pragmatism, developed by Charles Sanders Peirce (1839-1914) through phenomenological analysis, and Domain Theory, developed by Thijs Bax and Henk Trum since 1977. The first is a phenomenological branch of philosophy, the second a theory of interdisciplinary design. A connection seems possible because of similarity in form (three-partitions with an anarcho-hierarchical character), the not-absolute conception of functionality and the interdisciplinary and procedural (participation based action) character of both theories.
series	DDSS
last changed	2003/11/21 15:16

_id	958e
authors	Coppola, Carlo and Ceso, Alessandro
year	2000
title	Computer Aided Design and Artificial Intelligence in Urban and Architectural Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 301-307
doi	https://doi.org/10.52842/conf.ecaade.2000.301
summary	In general, computer-aided design is still limited to a rather elementary use of the medium, as it is mainly used for the representation/simulation of a design idea w an electronic drawing-table. hich is not computer-generated. The procedures used to date have been basically been those of an electronic drawing-table. At the first stage of development the objective was to find a different and better means of communication, to give form to an idea so as to show its quality. The procedures used were 2D design and 3D simulation models, usually used when the design was already defined. The second stage is when solid 3D modelling is used to define the formal design at the conception stage, using virtual models instead of study models in wood, plastic, etc. At the same time in other connected fields the objective is to evaluate the feasibility of the formal idea by means of structural and technological analysis. The third stage, in my opinion, should aim to develop procedures capable of contributing to both the generation of the formal idea and the simultaneous study of technical feasibility by means of a decision-making support system aided by an Artificial Intelligence procedure which will lead to what I would describe as the definition of the design in its totality. The approach to architectural and urban design has been strongly influenced by the first two stages, though these have developed independently and with very specific objectives. It is my belief that architectural design is now increasingly the result of a structured and complex process, not a simple act of pure artistic invention. Consequently, I feel that the way forward is a procedure able to virtually represent all the features of the object designed, not only in its definitive configuration but also and more importantly in the interactions which determine the design process as it develops. Thus A.I. becomes the means of synthesis for models which are hierarchically subordinated which together determine the design object in its developmental process, supporting decision-making by applying processing criteria which generative modelling has already identified. This trend is currently being experimented, giving rise to interesting results from process design in the field of industrial production.
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:56

_id	0cb1
authors	Dave, Bharat
year	2000
title	Architecture of Digital Imagination
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 297-306
doi	https://doi.org/10.52842/conf.caadria.2000.297
summary	Digital technologies extend, displace or substitute entirely new elements into what has been observed so far in the traditional modes of conception, representation and communication of design. This paper examines various characteristics of digital media and representations, their impacts- constraining and liberating- on modes of conception in design, and possible shifts in design expressions and ways of designing. While much effort invested in research to date has relied upon architecture as conceived, taught and communicated in traditional modes, the use of digital technologies changes those very premises. The import of such characterisation for design computation research is to highlight emerging agendas for future investigation.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	d931
authors	Gabryszewski, Artur B.
year	1999
title	Idea of an Intelligent Building - Development Prospects
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 739-743
doi	https://doi.org/10.52842/conf.ecaade.1999.739
summary	An ever-increasing number of offices as also residential buildings are being realised by designers and investors in accordance with the concept of an intelligent building. Houses of the new generation are being constructed. This is possible thanks to dynamic progress in the development of computer and microprocessor engineering techniques. Putting into reality the idea of the 'intelligent building' will become one of the most interesting assignments of Polish building industry in the rapidly approaching XXI century. The term 'intelligent building' first appeared in the eighties. The idea behind this conception is aspiring to create a friendly, work supporting, effective environment. The revolution in telecommunications and information technology along with change in the standards of office work, have caused computer networks and modem systems of automation and protection, to invade buildings. From the technical point of view, an intelligent building is an object in which all the subsystems co-operate with each other, forming a friendly environment for man. For users of an intelligent building, the most important issue is realisation of the following aims: object management which includes both control of human resources and automation systems in the building and also efficient management of the building space in such a way that the costs of its utilisation are minimised. The possibility of optional installation of modern systems and equipment should be facilitated by the architecture itself. Therefore, the specifics of all the building elements should be taken into account right at the designing stage. The following features characterise an intelligent building: integration of telecommunication systems in the building, central management and supervision system and utilisation of structural cabling as the carrier of signals controlling most of the systems in the building. Presently, there is no building in Poland that could be characterised by the three features mentioned.
keywords	High-tech Architecture, Ecology, CAAD
series	eCAADe
email
last changed	2022/06/07 07:50

_id	1022
authors	Jozen, T., Wang, L. and Sasada, T.
year	1999
title	Sketch VRML - 3D Modeling of Conception
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 557-563
doi	https://doi.org/10.52842/conf.ecaade.1999.557
summary	When an idea hits upon architect's mind suddenly, that idea may be memorized on a piece of paper like as napkin of a restaurant, reverse face of pamphlet etc. For conceptual design, free-form drawing with pencil and paper can efficiently delineate architect's thinking. In environmental design such as urban developing, architects usually describe their initial conception on 2D sketch. Our aim is to construct the Sketch-VRML system mixing non-photo realistic free-form 2D sketch and usual 3D computer graphics for conceptual design applying it to environmental design. It is our principle that we can use CG lightly and naturally like 'croquis' with no special hardware needed but just pencil and paper. From free-form 2D sketch on paper, the Sketch-VRML system builds it up to 3D model 'as is' resembling free hand drawing and it can be revolved and extruded. 3DCG component already produced will be useful material for design making as well as sketches. Therefore, we would like to use these materials as conception making resource with database.
keywords	Conception, Sketch, 3DCG, Database
series	eCAADe
last changed	2022/06/07 07:52

For more results click below: