Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 749

Reformat results as: short short into frame detailed detailed into frame

_id	10e9
authors	Heylighen, Ann and Neuckermans, Herman
year	2000
title	DYNAMO in Action - Development and Use of a Web-Based Design Tool
source	J. Pohl & T. Fowler (eds.), Proceedings of the Focus Symposium on Advances in Computer-Based and Web-Based Collaborative Systems - InterSymp-2000 International Conference On Systems Research, Informatics and Cybernetics, Baden-Baden (Germany), July 31 - Aug 4, 2000 (ISBN 0-921836-88-0), pp. 233-242
summary	Addressing the subject of Case-Based Design (CBD), the paper describes the development and use of a Web-based design tool called DYNAMO. The tool is firmly rooted in the Dynamic Memory Theory underlying the CBD approach. Yet, rather than adopting it as such, we have tried to enrich this approach by extrapolating it beyond the individual. This extrapolation stimulates and intensifies several modes of interaction. Doing so, DYNAMO tries to kill two birds with one stone. At short notice, it provides architects and architecture students with a rich source of inspiration, ideas and design knowledge for their present design task, as it is filled with a permanently growing collection of design cases that is accessible on-line. Its long-term objective is to initiate and nurture the life-long process of learning from (design) experience as suggested by the cognitive model underlying CBD, and Case-Based Reasoning in general. DYNAMO is therefore conceived as an (inter-)active workhouse rather than a passive warehouse: it is interactively developed by and actively develops the user's design knowledge. Whereas previous papers have focused on the theoretical ideas of DYNAMO, this paper points out how Web technology enables us to implement these ideas as a working prototype. Furthermore, an annotated scenario of the system in use is described.
keywords	Case-Based Design, Web Technology, Architectural Design
series	journal paper
email
last changed	2002/11/22 14:50

_id	3338
authors	Heylighen, Ann and Neuckermans, Herman
year	2000
title	DYNAMO - Dynamic Architectural Memory On-line
source	Educational Technology and Society, Vol.3, No.2, April 2000 (ISSN 1436-4522), pp. 86-95
summary	This paper describes the current status of DYNAMO, a web-based design assistant for students and professional designers in the field of architecture. The tool can be considered a Case-Based Design (CBD) system in so far that it was inspired by the view of cognition underlying CBD. The paper points out how DYNAMO incorporates this view, and at the same time extrapolates it beyond the individual. In this way, the tool attempts to embrace and profit from several kinds of interaction that are crucial for the development and renewal of design knowledge. This should result in a design tool that both feels cognitively comfortable to (student-) designers, and offers them a platform for exchanging knowledge and insights with colleagues in different contexts and at different levels of experience. In addition, the paper describes the implementation of these theoretical ideas as a working prototype, which has recently been tested by 4th year design students. Finally, DYNAMO is situated in the context of other comparable tools that have been or are being developed in the field of architectural design.
keywords	Educational Multimedia, Interactive Learning Environments, Online Education
series	journal paper
email
more	http://ifets.gmd.de/periodical/vol_2_2000/heylighen.html
last changed	2002/11/14 08:40

_id	83b5
authors	Heylighen, Ann and Neuckermans, Herman
year	2000
title	Time, equipment and encouragement - Travel requisites for the World-Wide Wanderstudent
source	G. Van der Perre and P. Vandevelde (eds.), The Wanderstudent 2000: The Wanderstudent of 1425 revived in virtual reality in 2000? Towards a European Virtual University, Proceedings of the International Colloquium organised by EuroPACE at the Katholieke Universiteit Leuven, Leuven, Belgium, on October 20-21, 2000 Leuven University Press, Leuven (Belgium), 2000 (ISBN 90 5867 156 9), pp. 133-136
summary	In Winter/Spring 1999, DYNAMO - a Web-based design assistant for student architects - received its baptism of fire in a 4th year design studio at our department. The paper describes the setting and procedure of the baptism, the participation of the studio teaching staff, and the students' reactions and appreciation. Based on students' responses to a questionnaire and observations of the tool in use, we investigated whether DYNAMO succeeded in engaging students and what factors stimulated/hampered this engagement. Although students were noticeably enthusiastic about the tool, three factors revealed themselves as major obstacles to student engagement: lack of time, of encouragement by the teachers and of studio equipment. The paper concludes with lessons learned for the future of DYNAMO and, more in general, of ICT in education.
series	journal paper
email
last changed	2002/11/14 08:38

_id	b5f3
authors	Johnson, Brian R.
year	2000
title	Sustaining Studio Culture: How Well Do Internet Tools Meet the Needs of Virtual Design Studios?
doi	https://doi.org/10.52842/conf.ecaade.2000.015
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 15-22
summary	The Internet beckons seductively to students. The prospect of nearly instantaneous communication with acquaintances spread across the face of the earth is alluring. The ease with which rich graphical content can be made available to the world is stunning. The possibility of a design being seen by friends, family, and famous architects is tantalizing. Faculty are drawn by the potent synergy and learning that can be found in the opposition and cooperation of different cultural roots. It is probable that entire design studio sequences will be offered through distance-learning programs in the near future. Is that a good idea? Much has been written about "virtual design studios" in architecture schools and "virtual offices" in practice. Most offices have largely or totally abandoned drafting boards in favor of digital tools of production. Yet, regarding design, Ken Sanders, author of The Digital Architect, and Manager of Information Services at Zimmer Gunsul Frasca Partnership (ZGF), of Portland, Oregon, has written "we still make an effort to locate project teams together and always will". Production CAD work requires different kinds of interaction than design and design instruction. The experiments have been invaluable in developing strategies for use of the Internet as a component of a design studio series, but rarely depend entirely on use of the Internet for all course communications. In fact, most describe fairly isolated efforts to augment some aspect of traditional design environments using Internet tools (ftp, email, web). A few have implemented new pedagogic or collaboration paradigms (e.g., ETH’s phase(x)). This paper considers the traditional design studio in terms of formal and informal activities, characterizes the major Internet technologies with regard to the resulting interaction issues. In particular, it describes an area of informal work group communications that appears to be ill-supported with existing tools. The paper goes on to describe a web-based collaboration tool which was developed to address the need for less formal communication. The context for this development is the concept of a fully distributed collaboration environment with particular attention to questions of informal communication. Finally, it describes how the tool was deployed in an experimental "web studio" setting and student responses to use of the tool.
keywords	Virtual Design Studio, Collaboration, Online Communities, Web Tools
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:52

_id	988d
authors	Russell, Peter and Forgber, Uwe
year	2000
title	The E-Talier: Inter-university Networked Design Studios
doi	https://doi.org/10.52842/conf.ecaade.2000.045
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 45-50
summary	The widespread infiltration of internet based variations of traditional areas of society (e-commerce, e-business, e-mail etc.) will not spare the halls of academia in its propagation. The term courseware is well nigh 20 years old and considerable research and development has been done in bringing network based distributed courses to university consortiums including those in architecture and civil engineering. Indeed, the European Commission has recently approved funding for a 3-year web-based virtual university of architecture and construction technology: the WINDS project led by the University of Ancona. Such attempts to create e-courses are largely an extension of typical courseware where the syllabus is quantified and divided into lessons for use by the students alone or in conjunction with their tutors and professors. This is quite adequate in conveying the base knowledge of the profession. However, the tenants of being an architect or engineer involve the deft use of that unwieldy named and deliciously imprecise tool called "design". Teaching design sooner or later involves the design studio: a pedagogically construed environment of simulation intended to train, not teach the skills of designing. This is fundamentally different from normal courseware. A network based design studio (Etalier) must be able to reflect the nature of learning design. Design studios typically involve specifically chosen design problems, researched supporting information to assist design decisions, focussed discussions, individual consultation and criticism, group criticism, public forums for presentation discussion and criticism as well as a myriad of informal undocumented communication among the students themselves. So too must an Etalier function. Essentially, it must allow collaboration through communication. Traditional barriers to collaboration include language, culture (both national and professional) and distance. Through the internet's capricious growth and the widespread use of English as a second language, the largest hurdle to attaining fruitful collaboration is probably cultural. In the case of an Etalier in a university setting, the cultural difficulties arise from administrative rules, the pedagogical culture of specific universities and issues such as scheduling and accreditation. Previous experiments with virtual design studios have demonstrated the criticality of such issues. The proposed system allows participating members to specify the degree and breadth with which they wish to partake. As opposed to specifying the conditions of membership, we propose to specify the conditions of partnership. Through the basic principal of reciprocity, issues such as accreditation and work load sharing can be mitigated. Further, the establishment of a studio market will allow students, tutors and professors from participating institutions to partake in studio projects of their choosing in accordance with their own constraints, be they related to schedule, expertise, legal or other matters. The paper describes these mechanisms and some possible scenarios for collaboration in the Etalier market.
keywords	e-Studio, Virtual Design Studio, Courseware, CSCW
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:56

_id	c6db
authors	Heylighen, Ann
year	2000
title	In Case of Architectural Design. Critique and Praise of Case-Based Design in Architecture
source	Dissertation - Doct. Toegepaste wetenschappen, KU Leuven, Fac. Toegepaste wetenschappen, Dep. architectuur, stedebouw en ruimtelijke ordening (ISBN 90-5682-248-9)
summary	Architects are said to learn design by experience. Learning design by experience is the essence of Case-Based Design (CBD), a sub-domain of Artificial Intelligence. Part I critically explores the CBD approach from an architectural point of view, tracing its origins in the Theory of Dynamic Memory and highlighting its potential for architectural design. Seven CBD systems are analysed, experienced architects and design teachers are interviewed, and an experiment is carried out to examine how cases affect the design performance of architecture students. The results of this exploration show that despite its sound view on how architects acquire (design) knowledge, CBD is limited in important respects: it reduces architectural design to problem solving, is difficult to implement and has to contend with prejudices among the target group. With a view to stretching these limits, part II covers the design, implementation and evaluation of DYNAMO (Dynamic Architectural Memory On-line). This Web-based design tool tailors the CBD approach to the complexity of architectural design by effecting three transformations: extending the concern with design products towards design processes, turning static case bases into dynamic memories and upgrading users from passive case consumers to active case-based designers.
keywords	Architectural Design; Case-Based Design
series	thesis:PhD
email
last changed	2002/12/14 19:29

_id	bb5f
authors	Ahmad Rafi, M.E. and Mohd Fazidin, J.
year	2001
title	Creating a City Administration System (CAS) using Virtual Reality in an Immersive Collaborative Environment (ICE)
doi	https://doi.org/10.52842/conf.ecaade.2001.449
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 449-453
summary	Current problems in administration of a city are found to be decentralized and noninteractive for an effective city management. This usually will result in inconsistencies of decision-making, inefficient services and slow response to a particular action. City administration often spends more money, time and human resource because of these problems. This research demonstrates our research and development of creating a City Administration System (CAS) to solve the problems stated above. The task of the system is to use information, multimedia and graphical technologies to form a database in which the city administrators can monitor, understand and manage an entire city from a central location. The key technology behind the success of the overall system uses virtual reality and immersive collaborative environment (ICE). This system employs emerging computer based real-time interactive technologies that are expected to ensure effective decisionmaking process, improved communication, and collaboration, error reduction, (Rafi and Karboulonis, 2000) between multi disciplinary users and approaches. This multi perspective approach allows planners, engineers, urban designers, architects, local authorities, environmentalists and general public to search, understand, process and anticipate the impact of a particular situation in the new city. It is hoped that the CAS will benefit city administrators to give them a tool that gives them the ability to understand, plan, and manage the business of running the city.
keywords	City Administration System (CAS), Virtual Reality, Immersive Collaborative Environment (ICE), Database
series	eCAADe
email
last changed	2022/06/07 07:54

_id	bbb9
authors	Blaise, Jean-Yves and Dudek, Iwona
year	1999
title	SOL: Spatial and Historical Web-Based Interface for On Line Architectural Documentation of Krakow's Rynek Gowny
doi	https://doi.org/10.52842/conf.ecaade.1999.700
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 700-707
summary	Our paper presents recent developments of a co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France), specialised in computer science and the HAiKZ Institute of Krakow's Faculty of Architecture, specialised in architectural heritage and conservation. Before undertaking any action to a listed building or interventions in its neighbourhood, it is vital to gain a clear understanding of the building in question. Numerous heterogeneous data detained by diverse institutions has to be handled. This process can be greatly eased by enhanced classification of the information. The development we present is a multidisciplinary platform independent information tool dedicated to education and research. SOL uses an http protocol centred computer architecture connecting a relational database, a VRML 2.0 representation module and a web search interface. It allows searches and updating of the database through a standard text based interface, a VRML 2.0 graphical module and a thematic interface. SOL is experienced on the urban fabric of the Main Square (Rynek Gówny) in Kraków. The choice of a web-centred development, both in the search and updating interface and in the representation module provides platform independence and distant access to the database, and enables successive contributions of students or researchers.
keywords	Web Interface, Database, Architectural Heritage Environment, Information Module, Historical Evolutions
series	eCAADe
email
more	http://alberti.gamsau.archi.fr
last changed	2022/06/07 07:52

_id	7da6
authors	Campbell, Dace A.
year	2000
title	Architectural construction documents on the web: VRML as a case study
source	Automation in Construction 9 (1) (2000) pp. 129-138
summary	The Virtual Reality Modeling Language (VRML) and the World Wide Web (WWW) offer new opportunities to communicate an architect's design intent throughout the design process. We have investigated the use of VRML in the production and communication of construction documents, the final phase of architectural building design. A prototype, experimental Web site was set up and used to disseminate design data as VRML models and HTML text to the design client, contractor, and fabricators. In this paper, we discuss the way our construction documents were developed in VRML, the issues we faced implementing it, and critical feedback from the users of the Web space/site. We analyze the usefulness of VRML as a communication tool for the design and construction industries. Finally, we discuss technical, social, and legal issues the AEC industry faces as it shifts to embrace widespread use of a "paperless" Web-based communications infrastructure for design documentation.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	30f5
authors	Chan, Chen-Wei and Chiu, Mao-Lin
year	2000
title	A Simulation Study of Urban Growth Patterns with Fractal Geometry
doi	https://doi.org/10.52842/conf.caadria.2000.055
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 55-64
summary	This paper depicts the use of fractal geometry in urban simulation. Fractal geometry, L-system, the DLA model, and related urban growth theories are first examined. Then an urban simulation system based on fractal geometry and L-system, Fractal_US, is built on the web for studying urban development patterns in various conditions. The Taipei city is simulated to demonstrate the visualization of urban growth and the result is presented for further discussion.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	d1a6
authors	Corona Martínez, A., Vigo, L. and Folchi, A.
year	2001
title	SEMINARIO/TALLER DE INVESTIGACION PROYECTUAL ESTRUCTURA DE TALLER ACTIVO PARA LA ENSEÑANZA E INVESTIGACIÓN PROYECTUAL ARQUITECTÓNICA ASISTIDO POR TÉCNOLOGÍAS DIGITALES (Research Seminar/Workshop on the Structure of Active Design Studios for Training and Research on Computer Aided Design)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 227-228
summary	In a previous paper (SiGradi 2000) we presented a design approach based upon the architectural research that regarded digital technologies as a subordinated tool to architectural design. From that starting point and from various research experiences, we have re-oriented certain guidelines and latter developed specific techniques that can be used both for teaching and for the professional practice of architecture. Through the use of paradigmatic and hermeneutic techniques developed ad hoc, architectural projects are developed in a three-stage sequence: a) development of a narrative framework; b) analysis based on object oriented programming thechniques; and c) digital development of the preliminary design. We believe that the positive aspects of the inclusion of these idea-centered techniques to the digital realm unifies and extends the architectural knowledge and strengthens its conception.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	ec4d
authors	Croser, J.
year	2001
title	GDL Object
source	The Architect’s Journal, 14 June 2001, pp. 49-50
summary	It is all too common for technology companies to seek a new route to solving the same problem but for the most part the solutions address the effect and not the cause. The good old-fashioned pencil is the perfect example where inventors have sought to design-out the effect of the inherent brittleness of lead. Traditionally different methods of sharpening were suggested and more recently the propelling pencil has reigned king, the lead being supported by the dispensing sleeve thus reducing the likelihood of breakage. Developers convinced by the Single Building Model approach to design development have each embarked on a difficult journey to create an easy to use feature packed application. Unfortunately it seems that the two are not mutually compatible if we are to believe what we see emanating from Technology giants Autodesk in the guise of Architectural Desktop 3. The effect of their development is a feature rich environment but the cost and in this case the cause is a tool which is far from easy to use. However, this is only a small part of a much bigger problem, Interoperability. You see when one designer develops a model with one tool the information is typically locked in that environment. Of course the geometry can be distributed and shared amongst the team for use with their tools but the properties, or as often misquoted, the intelligence is lost along the way. The effect is the technological version of rubble; the cause is the low quality of data-translation available to us. Fortunately there is one company, which is making rapid advancements on the whole issue of collaboration, and data sharing. An old timer (Graphisoft - famous for ArchiCAD) has just donned a smart new suit, set up a new company called GDL Technology and stepped into the ring to do battle, with a difference. The difference is that GDL Technology does not rely on conquering the competition, quite the opposite in fact their success relies upon the continued success of all the major CAD platforms including AutoCAD, MicroStation and ArchiCAD (of course). GDL Technology have created a standard data format for manufacturers called GDL Objects. Product manufacturers such as Velux are now able to develop product libraries using GDL Objects, which can then be placed in a CAD model, or drawing using almost any CAD tool. The product libraries can be stored on the web or on CD giving easy download access to any building industry professional. These objects are created using scripts which makes them tiny for downloading from the web. Each object contains 3 important types of information: · Parametric scale dependant 2d plan symbols · Full 3d geometric data · Manufacturers information such as material, colour and price Whilst manufacturers are racing to GDL Technologies door to sign up, developers and clients are quick to see the benefit too. Porsche are using GDL Objects to manage their brand identity as they build over 300 new showrooms worldwide. Having defined the building style and interior Porsche, in conjunction with the product suppliers, have produced a CD-ROM with all of the selected building components such as cladding, doors, furniture, and finishes. Designing and detailing the various schemes will therefore be as straightforward as using Lego. To ease the process of accessing, sizing and placing the product libraries GDL Technology have developed a product called GDL Object Explorer, a free-standing application which can be placed on the CD with the product libraries. Furthermore, whilst the Object Explorer gives access to the GDL Objects it also enables the user to save the object in one of many file formats including DWG, DGN, DXF, 3DS and even the IAI's IFC. However, if you are an AutoCAD user there is another tool, which has been designed especially for you, it is called the Object Adapter and it works inside of AutoCAD 14 and 2000. The Object Adapter will dynamically convert all GDL Objects to AutoCAD Blocks during placement, which means that they can be controlled with standard AutoCAD commands. Furthermore, each object can be linked to an online document from the manufacturer web site, which is ideal for more extensive product information. Other tools, which have been developed to make the most of the objects, are the Web Plug-in and SalesCAD. The Plug-in enables objects to be dynamically modified and displayed on web pages and Sales CAD is an easy to learn and use design tool for sales teams to explore, develop and cost designs on a Notebook PC whilst sitting in the architects office. All sales quotations are directly extracted from the model and presented in HTML format as a mixture of product images, product descriptions and tables identifying quantities and costs. With full lifecycle information stored in each GDL Object it is no surprise that GDL Technology see their objects as the future for building design. Indeed they are not alone, the IAI have already said that they are going to explore the possibility of associating GDL Objects with their own data sharing format the IFC. So down to the dirty stuff, money and how much it costs? Well, at the risk of sounding like a market trader in Petticoat Lane, "To you guv? Nuffin". That's right as a user of this technology it will cost you nothing! Not a penny, it is gratis, free. The product manufacturer pays for the license to host their libraries on the web or on CD and even then their costs are small costing from as little as 50p for each CD filled with objects. GDL Technology has come up trumps with their GDL Objects. They have developed a new way to solve old problems. If CAD were a pencil then GDL Objects would be ballistic lead, which would never break or loose its point. A much better alternative to the strategy used by many of their competitors who seek to avoid breaking the pencil by persuading the artist not to press down so hard. If you are still reading and you have not already dropped the magazine and run off to find out if your favorite product supplier has already signed up then I suggest you check out the following web sites www.gdlcentral.com and www.gdltechnology.com. If you do not see them there, pick up the phone and ask them why.
series	journal paper
email
last changed	2003/04/23 15:14

_id	389b
authors	Do, Ellen Yi-Luen
year	2000
title	Sketch that Scene for Me: Creating Virtual Worlds by Freehand Drawing
doi	https://doi.org/10.52842/conf.ecaade.2000.265
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 265-268
summary	With the Web people can now view virtual threedimensional worlds and explore virtual space. Increasingly, novice users are interested in creating 3D Web sites. Virtual Reality Modeling Language gained ISO status in 1997, although it is being supplanted by the compatible Java3D API and alternative 3D Web technologies compete. Viewing VRML scenes is relatively straightforward on most hardware platforms and browsers, but currently there are only two ways to create 3D virtual scenes: One is to code the scene directly using VRML. The other is to use existing CAD and modeling software, and save the world in VRML format or convert to VRML from some other format. Both methods are time consuming, cumbersome, and have steep learning curves. Pen-based user interfaces, on the other hand, are for many an easy and intuitive method for graphics input. Not only are people familiar with the look and feel of paper and pencil, novice users also find it less intimidating to draw what they want, where they want it instead of using a complicated tool palette and pull-down menus. Architects and designers use sketches as a primary tool to generate design ideas and to explore alternatives, and numerous computer-based interfaces have played on the concept of "sketch". However, we restrict the notion of sketch to freehand drawing, which we believe helps people to think, to envision, and to recognize properties of the objects with which they are working. SKETCH employs a pen interface to create three-dimensional models, but it uses a simple language of gestures to control a three-dimensional modeler; it does not attempt to interpret freehand drawings. In contrast, our support of 3D world creation using freehand drawing depend on users’ traditional understanding of a floor plan representation. Igarashi et al. used a pen interface to drive browsing in a 3D world, by projecting the user’s marks on the ground plane in the virtual world. Our Sketch-3D project extends this approach, investigating an interface that allows direct interpretation of the drawing marks (what you draw is what you get) and serves as a rapid prototyping tool for creating 3D virtual scenes.
keywords	Freehand Sketching, Pen-Based User Interface, Interaction, VRML, Navigation
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	9554
authors	Jagbeck, A.
year	2000
title	Field test of a product-model-based construction planning tool
source	CIDAC, Volume 2 Issue 2 May 2000, pp. 80-91
summary	Over the past decade, more than a dozen papers describing proposals for product-model-based planning models have been published, but only a few of these proposals have been implemented in prototypes that have been tested in full-scale tests. PreFacto is a research-based software for production planning based on product model data, which has been developed and tested in close cooperation with a construction company. It is operational but still under development. Assessing the degree of functionality achieved so far is a natural part of a modern cyclical software development process. This paper describes a 6-month full-scale field trial of the PreFacto system undertaken by the site management in cooperation with the author. It was carried out as a parallel planning activity on a real ongoing project. The trial was documented and the system's usability for the construction planning process was analysed and evaluated using mainly qualitative methods. The evaluated planning activities include importing product model data and performing a range of planning activities. The evaluation addressed such usability aspects as system capacity, ease of use of the interface, and conceptual compliance with the use context and the various planning tasks. The test method was useful for checking the conceptual model from the user's point of view. At the same time, the field trial worked equally as a case study for developers, a study of a degree of reality that would not have been possible in a laboratory situation. Apart from the evaluation of the features of the software itself, there are some results of general interest. the main result was that all the advantages of the system derive from the connection between design and planning, i.e. the use of a product model as a basis for defining the result of production tasks. Allowing production managers to freely structure tasks and to apply resource recipes were the most relevant functions.
keywords	Integration, Information, Construction, Planning, Field Trial, Product Model
series	journal paper
last changed	2003/05/15 21:23

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2683
authors	Kos, Jose Ripper
year	2000
title	Architectural Hypermedia Based on 3D Models
doi	https://doi.org/10.52842/conf.ecaade.2000.221
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 221-224
summary	The World Wide Web gave a new dimension to the terms hypermedia and hypertext. Their distinctions are not very clear and in this paper we will use both with the same meaning. They are usually defined in a very generic way as a revolutionary form of writing. The generalization and glorification of hypertext, however, obscures a clearer view of its real possibilities. Architects will benefit by investigating carefully its resources - and how it can be a powerful tool for the profession, particularly when associated with 3D models.
keywords	Hypermedia, 3D Model, Hypertext, Latin-American Cities, Architecture
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:51

_id	30c8
authors	Koutamanis, A., Barendse, P.B74 and Kempenaar, J.W.
year	1999
title	Web-based CAAD Instruction: The Delft Experience
doi	https://doi.org/10.52842/conf.ecaade.1999.159
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 159-168
summary	In the early 1990s, the introduction of an extensive CAAD component in the compulsory curriculum of the Faculty of Architecture, Delft University of Technology, stimulated experimentation with computer-based instruction systems. The emergence of the World Wide Web presented new possibilities. Nevertheless, the reasons for investing in Web-based CAAD instruction were mostly pragmatic, i.e. a reaction to necessity, rather than an intention to explore, experiment and revolutionize. One of the problems addressed in our Web-based CAAD instruction is CAAD literacy. Help files and manuals that accompany software have proven to be unsuitable for introductory courses in design computing. This led to the development of a series of dynamic Web-based tutorials, in the form of interactive slide shows. The implementation of the tutorials is based on a cooperative framework that allows teachers and students to contribute at different levels of technical and methodical complexity. The use of the Web in CAAD education also stimulated a more active attitude among students. Despite the limited support and incentives offered by the Faculty, the Web-based CAAD courses became an invitation to intelligent and meaningful use of Web technologies by students for design presentation and communication. This is not only a useful addition to the opportunities offered by CAAD systems but also a prerequisite to new design communities.
keywords	WWW Technologies, Teaching
series	eCAADe
email
last changed	2022/06/07 07:51

_id	81f3
authors	Martens, Bob and Turk, Ziga
year	1999
title	Working Experiences with a Cumulative Index on CAD: "CUMINCAD"
doi	https://doi.org/10.52842/conf.ecaade.1999.327
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 327-333
summary	To researchers in every discipline, Internet is quickly becoming the dominating environment to do literature studies. Commercial bibliographic databases tend to be too general, are not up-to-date and require special skills and effort to be searched. On the other hand researchers also publish on the Web and collaboratively that can create indexes of relevant publications. CUMINCAD is a bibliographic index that compiles papers related to computer aided architectural design. Implemented with a database, it allows searching and browsing in the ways usual on the Web. It provides a "historical evolution" to learn from previous efforts and draws attention to older original works that could have been ignored because they could not be found on the Web otherwise. The authors believe that CUMINCAD will help focus future CAAD research and improve the education. CUMINCAD work started in 1998 and is available at www.fagg.uni-lj.si/cumincad/. This paper focusses on the design and development of the database and presents some ideas concerning its advanced use in the analysis of research efforts.
keywords	CAAD-related Publications, Web-based Bibliographic Database, Searchable Index, Retrospective CAAD Research
series	eCAADe
email
last changed	2022/06/07 07:59

_id	6b25
authors	Pini, E.L., Abades, I.S. and Paolucci, A.L.
year	2000
title	El Modelo Digital en los Primeros Años de la Enseñanza de la Arquitectura (The Digital Model in the First Years of the Architectural Education)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 336-338
summary	We will analyze a pedagogic exercise that joined together both the Informatics and Morphology Courses, required in the second year of Architecture School. The objective of the analysis is to explore the possibilities of the computer as a tool for design, and also to contribute some ideas for planning, curriculum development, and the necessary training to introduce the use of computer graphics in the Architecture School. We based our analysis on some preliminary hypotheses: (1) Students must learn to use digital models with a certain degree of simultaneity with learning design and the other techniques used to develop models. (2) Professors of Design, Representation, and Morphology are main actors in this learning process; they do not have to become experts in informatics, but have some understanding of the topic. (3) Many universities and professional associations are offering students and professionals courses based in the use of programs, instead of addressing their real needs.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	ga0026
id	ga0026
authors	Ransen, Owen F.
year	2000
title	Possible Futures in Computer Art Generation
source	International Conference on Generative Art
summary	Years of trying to create an "Image Idea Generator" program have convinced me that the perfect solution would be to have an artificial artistic person, a design slave. This paper describes how I came to that conclusion, realistic alternatives, and briefly, how it could possibly happen. 1. The history of Repligator and Gliftic 1.1 Repligator In 1996 I had the idea of creating an “image idea generator”. I wanted something which would create images out of nothing, but guided by the user. The biggest conceptual problem I had was “out of nothing”. What does that mean? So I put aside that problem and forced the user to give the program a starting image. This program eventually turned into Repligator, commercially described as an “easy to use graphical effects program”, but actually, to my mind, an Image Idea Generator. The first release came out in October 1997. In December 1998 I described Repligator V4 [1] and how I thought it could be developed away from simply being an effects program. In July 1999 Repligator V4 won the Shareware Industry Awards Foundation prize for "Best Graphics Program of 1999". Prize winners are never told why they won, but I am sure that it was because of two things: 1) Easy of use 2) Ease of experimentation "Ease of experimentation" means that Repligator does in fact come up with new graphics ideas. Once you have input your original image you can generate new versions of that image simply by pushing a single key. Repligator is currently at version 6, but, apart from adding many new effects and a few new features, is basically the same program as version 4. Following on from the ideas in [1] I started to develop Gliftic, which is closer to my original thoughts of an image idea generator which "starts from nothing". The Gliftic model of images was that they are composed of three components: 1. Layout or form, for example the outline of a mandala is a form. 2. Color scheme, for example colors selected from autumn leaves from an oak tree. 3. Interpretation, for example Van Gogh would paint a mandala with oak tree colors in a different way to Andy Warhol. There is a Van Gogh interpretation and an Andy Warhol interpretation. Further I wanted to be able to genetically breed images, for example crossing two layouts to produce a child layout. And the same with interpretations and color schemes. If I could achieve this then the program would be very powerful. 1.2 Getting to Gliftic Programming has an amazing way of crystalising ideas. If you want to put an idea into practice via a computer program you really have to understand the idea not only globally, but just as importantly, in detail. You have to make hard design decisions, there can be no vagueness, and so implementing what I had decribed above turned out to be a considerable challenge. I soon found out that the hardest thing to do would be the breeding of forms. What are the "genes" of a form? What are the genes of a circle, say, and how do they compare to the genes of the outline of the UK? I wanted the genotype representation (inside the computer program's data) to be directly linked to the phenotype representation (on the computer screen). This seemed to be the best way of making sure that bred-forms would bare some visual relationship to their parents. I also wanted symmetry to be preserved. For example if two symmetrical objects were bred then their children should be symmetrical. I decided to represent shapes as simply closed polygonal shapes, and the "genes" of these shapes were simply the list of points defining the polygon. Thus a circle would have to be represented by a regular polygon of, say, 100 sides. The outline of the UK could easily be represented as a list of points every 10 Kilometers along the coast line. Now for the important question: what do you get when you cross a circle with the outline of the UK? I tried various ways of combining the "genes" (i.e. coordinates) of the shapes, but none of them really ended up producing interesting shapes. And of the methods I used, many of them, applied over several "generations" simply resulted in amorphous blobs, with no distinct family characteristics. Or rather maybe I should say that no single method of breeding shapes gave decent results for all types of images. Figure 1 shows an example of breeding a mandala with 6 regular polygons: Figure 1 Mandala bred with array of regular polygons I did not try out all my ideas, and maybe in the future I will return to the problem, but it was clear to me that it is a non-trivial problem. And if the breeding of shapes is a non-trivial problem, then what about the breeding of interpretations? I abandoned the genetic (breeding) model of generating designs but retained the idea of the three components (form, color scheme, interpretation). 1.3 Gliftic today Gliftic Version 1.0 was released in May 2000. It allows the user to change a form, a color scheme and an interpretation. The user can experiment with combining different components together and can thus home in on an personally pleasing image. Just as in Repligator, pushing the F7 key make the program choose all the options. Unlike Repligator however the user can also easily experiment with the form (only) by pushing F4, the color scheme (only) by pushing F5 and the interpretation (only) by pushing F6. Figures 2, 3 and 4 show some example images created by Gliftic. Figure 2 Mandala interpreted with arabesques Figure 3 Trellis interpreted with "graphic ivy" Figure 4 Regular dots interpreted as "sparks" 1.4 Forms in Gliftic V1 Forms are simply collections of graphics primitives (points, lines, ellipses and polygons). The program generates these collections according to the user's instructions. Currently the forms are: Mandala, Regular Polygon, Random Dots, Random Sticks, Random Shapes, Grid Of Polygons, Trellis, Flying Leap, Sticks And Waves, Spoked Wheel, Biological Growth, Chequer Squares, Regular Dots, Single Line, Paisley, Random Circles, Chevrons. 1.5 Color Schemes in Gliftic V1 When combining a form with an interpretation (described later) the program needs to know what colors it can use. The range of colors is called a color scheme. Gliftic has three color scheme types: 1. Random colors: Colors for the various parts of the image are chosen purely at random. 2. Hue Saturation Value (HSV) colors: The user can choose the main hue (e.g. red or yellow), the saturation (purity) of the color scheme and the value (brightness/darkness) . The user also has to choose how much variation is allowed in the color scheme. A wide variation allows the various colors of the final image to depart a long way from the HSV settings. A smaller variation results in the final image using almost a single color. 3. Colors chosen from an image: The user can choose an image (for example a JPG file of a famous painting, or a digital photograph he took while on holiday in Greece) and Gliftic will select colors from that image. Only colors from the selected image will appear in the output image. 1.6 Interpretations in Gliftic V1 Interpretation in Gliftic is best decribed with a few examples. A pure geometric line could be interpreted as: 1) the branch of a tree 2) a long thin arabesque 3) a sequence of disks 4) a chain, 5) a row of diamonds. An pure geometric ellipse could be interpreted as 1) a lake, 2) a planet, 3) an eye. Gliftic V1 has the following interpretations: Standard, Circles, Flying Leap, Graphic Ivy, Diamond Bar, Sparkz, Ess Disk, Ribbons, George Haite, Arabesque, ZigZag. 1.7 Applications of Gliftic Currently Gliftic is mostly used for creating WEB graphics, often backgrounds as it has an option to enable "tiling" of the generated images. There is also a possibility that it will be used in the custom textile business sometime within the next year or two. The real application of Gliftic is that of generating new graphics ideas, and I suspect that, like Repligator, many users will only understand this later. 2. The future of Gliftic, 3 possibilties Completing Gliftic V1 gave me the experience to understand what problems and opportunities there will be in future development of the program. Here I divide my many ideas into three oversimplified possibilities, and the real result may be a mix of two or all three of them. 2.1 Continue the current development "linearly" Gliftic could grow simply by the addition of more forms and interpretations. In fact I am sure that initially it will grow like this. However this limits the possibilities to what is inside the program itself. These limits can be mitigated by allowing the user to add forms (as vector files). The user can already add color schemes (as images). The biggest problem with leaving the program in its current state is that there is no easy way to add interpretations. 2.2 Allow the artist to program Gliftic It would be interesting to add a language to Gliftic which allows the user to program his own form generators and interpreters. In this way Gliftic becomes a "platform" for the development of dynamic graphics styles by the artist. The advantage of not having to deal with the complexities of Windows programming could attract the more adventurous artists and designers. The choice of programming language of course needs to take into account the fact that the "programmer" is probably not be an expert computer scientist. I have seen how LISP (an not exactly easy artificial intelligence language) has become very popular among non programming users of AutoCAD. If, to complete a job which you do manually and repeatedly, you can write a LISP macro of only 5 lines, then you may be tempted to learn enough LISP to write those 5 lines. Imagine also the ability to publish (and/or sell) "style generators". An artist could develop a particular interpretation function, it creates images of a given character which others find appealing. The interpretation (which runs inside Gliftic as a routine) could be offered to interior designers (for example) to unify carpets, wallpaper, furniture coverings for single projects. As Adrian Ward [3] says on his WEB site: "Programming is no less an artform than painting is a technical process." Learning a computer language to create a single image is overkill and impractical. Learning a computer language to create your own artistic style which generates an infinite series of images in that style may well be attractive. 2.3 Add an artificial conciousness to Gliftic This is a wild science fiction idea which comes into my head regularly. Gliftic manages to surprise the users with the images it makes, but, currently, is limited by what gets programmed into it or by pure chance. How about adding a real artifical conciousness to the program? Creating an intelligent artificial designer? According to Igor Aleksander [1] conciousness is required for programs (computers) to really become usefully intelligent. Aleksander thinks that "the line has been drawn under the philosophical discussion of conciousness, and the way is open to sound scientific investigation". Without going into the details, and with great over-simplification, there are roughly two sorts of artificial intelligence: 1) Programmed intelligence, where, to all intents and purposes, the programmer is the "intelligence". The program may perform well (but often, in practice, doesn't) and any learning which is done is simply statistical and pre-programmed. There is no way that this type of program could become concious. 2) Neural network intelligence, where the programs are based roughly on a simple model of the brain, and the network learns how to do specific tasks. It is this sort of program which, according to Aleksander, could, in the future, become concious, and thus usefully intelligent. What could the advantages of an artificial artist be? 1) There would be no need for programming. Presumbably the human artist would dialog with the artificial artist, directing its development. 2) The artificial artist could be used as an apprentice, doing the "drudge" work of art, which needs intelligence, but is, anyway, monotonous for the human artist. 3) The human artist imagines "concepts", the artificial artist makes them concrete. 4) An concious artificial artist may come up with ideas of its own. Is this science fiction? Arthur C. Clarke's 1st Law: "If a famous scientist says that something can be done, then he is in all probability correct. If a famous scientist says that something cannot be done, then he is in all probability wrong". Arthur C Clarke's 2nd Law: "Only by trying to go beyond the current limits can you find out what the real limits are." One of Bertrand Russell's 10 commandments: "Do not fear to be eccentric in opinion, for every opinion now accepted was once eccentric" 3. References 1. "From Ramon Llull to Image Idea Generation". Ransen, Owen. Proceedings of the 1998 Milan First International Conference on Generative Art. 2. "How To Build A Mind" Aleksander, Igor. Wiedenfeld and Nicolson, 1999 3. "How I Drew One of My Pictures: or, The Authorship of Generative Art" by Adrian Ward and Geof Cox. Proceedings of the 1999 Milan 2nd International Conference on Generative Art.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

For more results click below: