Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 668

Reformat results as: short short into frame detailed detailed into frame

_id	f08d
authors	Abrahamson, S., Wallace, D., Senin, N. and Sferro, P.
year	2000
title	Integrated design in a service marketplace
source	Computer-Aided Design, Vol. 32 (2) (2000) pp. 97-107
summary	This paper presents a service marketplace vision for enterprise-wide integrated design modeling. In this environment, expert participants and product developmentorganizations are empowered to publish their geometric design, CAE, manufacturing, or marketing capabilities as live services that are operable over the Internet. Theseservices are made available through a service marketplace. Product developers, small or large, can subscribe to and flexibly inter-relate these services to embody adistributed product development organization, while simultaneously creating system models that allow the prediction and analysis of integrated product performance. It ishypothesized that product development services will become commodities, much like many component-level products are today. It will be possible to rapidly interchangeequivalent design service providers so that the development of the product and the definition of the product development organization become part of the same process.Computer-aided design tools will evolve to facilitate the publishing of live design services. A research prototype system called DOME is used to illustrate the concept and apilot study with Ford Motor Company is used in a preliminary assessment of the vision.
keywords	Integrated Modeling, System Modeling, Design Service Marketplace
series	journal paper
email
last changed	2003/05/15 21:33

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
doi	https://doi.org/10.52842/conf.ecaade.1999.169
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ddssar0001
id	ddssar0001
authors	Achten, Henri and Leeuwen, Jos van
year	2000
title	Towards generic representations of designs formalised as features
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Feature-Based Modelling (FBM) is an information modelling technique that allows the formalisation of design concepts and using these formal definitions in design modelling. The dynamic nature of design and design information calls for a specialised approach to FBM that takes into account flexibility and extensibility of Feature Models of designs. Research work in Eindhoven has led to a FBM framework and implementation that can be used to support design.. Feature models of a design process has demonstrated the feasibility of using this information modelling technique. To develop the work on FBM in design, three tracks are initiated: Feature model descriptions of design processes, automated generic representation recognition in graphic representations, and Feature models of generic representations. The paper shows the status of the work in the first two tracks, and present the results of the research work.
series	DDSS
last changed	2003/11/21 15:15

_id	ae61
authors	Af Klercker, Jonas
year	1999
title	CAAD - Integrated with the First Steps into Architecture
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 266-272
doi	https://doi.org/10.52842/conf.ecaade.1999.266
summary	How and when should CAAD be introduced in the curriculum of the School of Architecture? This paper begins with some arguments for starting CAAD education at the very beginning. At the School of Architecture in Lund teachers in the first year courses have tried to integrate CAAD with the introduction to architectural concepts and techniques. Traditionally the first year is divided by several subjects running courses separatly without any contact for coordination. From the academic year 96/97 the teachers of Aplied aestetics, Building Science, Architectural design and CAAD have decided to colaborate as much as possible to make the role of our different fields as clear as possible to the students. Therefore integrating CAAD was a natural step in the academic year 98/99. The computer techniques were taught one step in advance so that the students can practise their understanding of the programs in their tasks in the other subjects. The results were surprisingly good! The students have quickly learned to mix the manual and computer techniques to make expressive and interesting visual presentations of their ideas. Some students with antipaty to computers have overcome this handicap. Some interesting observations are discussed.
keywords	Curriculum, First Year Studies, Integration, CAAD, Modelling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	01c0
authors	Af Klercker, Jonas
year	2000
title	Modelling for Virtual Reality in Architecture
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 209-213
doi	https://doi.org/10.52842/conf.ecaade.2000.209
summary	CAAD systems are using object modelling methods for building databases to make information available. Object data must then be made useful for many different purposes in the design process. Even if the capacity of the computer will allow an almost unlimited amount of information to be transformed, the eye does not make the transformations in the same “simple” mathematical way. Trained architects have to involve in an inventive process of finding ways to “harmonize” this new medium with the human eye and the architect’s professional experience. This paper will be an interimistic report from a surveying course. During the spring semester 2000 the CAAD division of TU-Lund is giving a course “Modelling for VR in Architecture”. The students are practising architects with experience from using object modelling CAAD. The aims are to survey different ways to use available hard- and software to create VR-models of pieces of architecture and evaluate them in desktop and CAVE environments. The architect is to do as much preparation work as possible with his CAAD program and only the final adjustments with the special VR tool.
keywords	CAAD, VR, Modelling, Spatial Experience
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	37c2
authors	Ahmad Rafi, M.E.
year	1999
title	Visualisation of Design Using Animation for Virtual Prototyping
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 519-525
doi	https://doi.org/10.52842/conf.ecaade.1999.519
summary	Although recent technology in time-based representation has vastly improved, animation in virtual prototype design field remains the same. Some designers invest a huge amount of money in the latest visualisation and multimedia technology and yet may create even worse animation. They often cramp sequences resulting in many viewers failing to interpret the design positively as they miss a lot of vital information that explains the design. This paper basically reports the importance of film-making understanding for producing good virtual prototype animation. It will be based on a part of a research project on the use of time-based media in architectural practices. It also includes an empirical analysis of several architectural-based documentary films (including an interview with the film director) and past and present computer animation. This paper then concludes with recommendations of good techniques for making animated visualisation relative to the stage at which the animation is produced for better design decision.
keywords	Virtual Prototype, Animation, Time-Based, Film-Making
series	eCAADe
email
last changed	2022/06/07 07:54

_id	b0e7
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2000
title	The Re-Convergence of Art and Science: A Vehicle for Creativity
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 491-500
doi	https://doi.org/10.52842/conf.caadria.2000.491
summary	Ever-increasing complexity in product design and the need to deliver a cost-effective solution that benefits from a dynamic approach requires the employment and adoption of innovative design methods which ensure that products are of the highest quality and meet or exceed customers' expectations. According to Bronowski (1976) science and art were originally two faces of the same human creativity. However, as civilisation advances and works became specialised, the dichotomy of science and art gradually became apparent. Hence scientists and artists were born, and began to develop work that was polar opposite. The sense of beauty itself became separated from science and was confined within the field of art. This dichotomy existed through mankind's efforts in advancing civilisation to its present state. This paper briefly examines the relationship between art and science through the ages and discusses their relatively recent re-convergence. Based on this hypothesis, this paper studies the current state of the convergence between arts and sciences and examines the current relationship between the two by considering real world applications and products. The study of such products and their successes and impact they had in the marketplace due to their designs and aesthetics rather than their advanced technology that had partially failed them appears to support this argument. This text further argues that a re-convergence between art and science is currently occurring and highlights the need for accelerating this process. It is suggested that re-convergence is a result of new technologies which are adopted by practitioners that include effective visualisation and communication of ideas and concepts. Such elements are widely found today in multimedia and Virtual Environments (VEs) where such tools offer increased power and new abilities to both scientists and designers as both venture in each other's domains. This paper highlights the need for the employment of emerging computer based real-time interactive technologies that are expected to enhance the design process through real-time prototyping and visualisation, better decision-making, higher quality communication and collaboration, lessor error and reduced design cycles. Effective employment and adoption of innovative design methods that ensure products are delivered on time, and within budget, are of the highest quality and meet customer expectations are becoming of ever increasing importance. Such tools and concepts are outlined and their roles in the industries they currently serve are identified. Case studies from differing fields are also studied. It is also suggested that Virtual Reality interfaces should be used and given access to Computer Aided Design (CAD) model information and data so that users may interrogate virtual models for additional information and functionality. Adoption and appliance of such integrated technologies over the Internet and their relevance to electronic commerce is also discussed. Finally, emerging software and hardware technologies are outlined and case studies from the architecture, electronic games, and retail industries among others are discussed, the benefits are subsequently put forward to support the argument. The requirements for adopting such technologies in financial, skills required and process management terms are also considered and outlined.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	449f
authors	Aish, Robert
year	2000
title	Collaborative Design using Long Transactions and "Change Merge"
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 107-111
doi	https://doi.org/10.52842/conf.ecaade.2000.107
summary	If our goal is implement collaborative engineering across temporal, spatial and discipline dimensions, then it is suggested that we first have to address the necessary pre-requisites, which include both the deployment of "enterprise computing" and an understanding of the computing concepts on which such enterprise systems are based. This paper will consider the following computing concepts and the related concepts in the world of design computing, and discuss how these concepts have been realised in Bentley SystemsÕ ProjectBank collaborative engineering data repository: Computing Concept Related Design Concept Normalisation Model v. Report (or Drawing) Transaction Consistency of Design Long Transaction Parallelisation of Design Change Merge Coordination (synchronisation) Revisions Coordination (synchronisation) While we are most probably familiar with the applications of existing datadase concepts (such as Normalisation and Transaction Management) to the design process, the intent of this paper to focus
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	1838
authors	Akleman, E., Chen, J. and Meric, B.
year	2000
title	Intuitive and Effective Design of Periodic Symmetric Tiles
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 123-127
doi	https://doi.org/10.52842/conf.acadia.2000.123
summary	This paper presents a new approach for intuitive and effective design of periodic symmetric tiles. We observe that planar graphs can effectively represent symmetric tiles and graph drawing provides an intuitive paradigm for designing symmetric tiles. Moreover, based on our theoretical work to represent hexagonal symmetry by rectangular symmetry, we are able to present all symmetric tiles as graphs embedded on a torus and based on simple modulo operations. This approach enables us to develop a simple and efficient algorithm, which has been implemented in Java. By using this software, designers, architects and artists can create interesting symmetric tiles directly on the web. We also have designed a few examples of symmetric tiles to show the effectiveness of the approach.
series	ACADIA
last changed	2022/06/07 07:54

_id	sigradi2004_027
id	sigradi2004_027
authors	Alfredo Stipech
year	2004
title	Enseñanza de la representación manual y digital, para arquitectos y diseñadores [Teaching Hand and Digital Representation to Architects and Designers]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The supremacy of the digital means of representation and communication and the resulting shift of the manual means in the field of design and architecture, have engendered multiple opinions and literature. They focus and analyze the virtues and risks, the losses and substitutions, and the different expressive, productive and conceptual results of their leading role in the creative process. Furthermore, if we consider both as two extremes, apparently opposed, a broad panorama of combinations and additions are produced by the emerging group of hybrid practices. This motivated the development of a research project in the Universidad Nacional del Litoral de Santa Fe, Argentina, under the Program CAI+D 2000 dealing with Design and the Analog – Digital Means. From this project emerged a collection of conceptual speculations and experimentations in the extended field of representation, extended by the incorporation of new means and hybridations, searching for new parameters and methods for professional training and practice. Key words: analog, digital, graphics, means, representation.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	456a
authors	Alvarado, R.G., Parra, J.C., Vergara, R.L. and Chateau, H.B.
year	2000
title	Architectural References to Virtual Environments Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 151-155
doi	https://doi.org/10.52842/conf.ecaade.2000.151
summary	Based on a comparison between the perception of digital and real construction, the development of virtual systems and the review of additional sources, this paper states some differences between the design of virtual environments and architectural spaces. Virtual-reality technologies provide advanced capabilities to simulate real situations, and also to create digital worlds not referred to physical places, such as imaginary landscapes or environments devoted to electronic activities, like entertainment, learning or commerce. Some on-line services already use 3D-stages, resembling building halls and domestic objects, and several authors have mentioned virtual modeling as a job opportunity to architects. But it will argue in this paper that the design of those environments should consider their own digital characteristics. Besides, the use of virtual installations on networks impells a convergence with global media, like Internet or TV. Virtual environments can be a 3Devolution of communicational technologies, which have an increasing participation in culture, reaching a closer relationship to contemporary architecture.
keywords	Virtual Environments, Spatial Perception, Design Methodology
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	ddssar0002
id	ddssar0002
authors	Aoki, Yoshitsugu and Inage, Makoto
year	2000
title	Linguistic Operation System for Design of Architectural Form
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	In a process of architectural design, an architect not only draws by himself/herself but also lets another person modify a design by given a linguistic instruction expressing how the design ought to be. In the case of utilization of CAD systems, it is useful if the system modifies the design according to the linguistic instruction. On the other hand, because of the recent increase of the opportunities of designing a building whose roof has complicated curved surface, it extremely takes labor to change the design. This paper proposes a linguistic operation system that modifies a design according to the linguistic instruction of the modification by the user to support design of a complicated form with curved surface. The proposed system is expected to be integrated with a CAD system. First, the system presents a perspective sketch of a designed form. From the values of the design variables that characterize the form in the system, the system calculates the position of the form in “the association image space.” Second, the designer puts a linguistic instruction i.e., words as like as “let it be more light” to modify the form. The words used for the instruction have the position in the association image space. In the association image space, the system moves the position of the form to a new position that gets to be near the position of the given word. The system calculates the values of the design variables of the form corresponding to the new position. We need a mapping from every vector representing the position of the changed form in the association image space to the corresponding vector representing the values of the design variables. To find the mapping, we construct a neural network system with three levels. Finally, the system presents a perspective sketch of changed form using the calculated values of design variables.
series	DDSS
last changed	2003/11/21 15:15

_id	1071
authors	Asanowicz, Aleksander
year	1999
title	Evolution of Computer Aided Design: Three Generations of CAD
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 94-100
doi	https://doi.org/10.52842/conf.ecaade.1999.094
summary	This paper describes the three generations of CAD systems. The first generation of (primarily analytical) computer programmes really aided designing. These programmes were the tools for finding a functional solution in different areas of designing, from flat plans to the space organisation of a hospital. One of the shortcomings of these programmes was the lack of graphic interface. With time, however, this kind of interface was developed. As a result of this second generation of CAD systems the computer was transformed into a drafting machine and CAD meant Computer Aided Drafting. The main thesis of this consideration is that only now we have the chance to return to the idea of Computer Aided Design. One of the examples of these trends is the AVOCAAD programme in which Added Value of CAAD is analysed. The development of the third generation of CAD systems will be possible in the near future. Aiding the process of designing will demand the elaboration of new methods of using the computer at the early stages of this process. The computer should be used not for generating variants of functional solutions only but for also for the creation of 3D forms by 3D sketching. For this, the computer should be transformed from a tool into a medium; only then will designing become true Designing in Cyber Space.
keywords	Generations of CAAD, Design Process, Creation, Medium
series	eCAADe
email
last changed	2022/06/07 07:54

_id	0c0d
authors	Asanowicz, Aleksander
year	2000
title	Computer as an Metaphorisation Machine
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 283-286
doi	https://doi.org/10.52842/conf.ecaade.2000.283
summary	Digital media is transforming the practice and teaching of design. Information technologies offer not only better production and rendering tools but also the ability to model, manipulate, and understand design in new ways. A new era in CAAD has started. One of the aspects of this situation is the increase in the number of computers in design offices and architectural schools (many of our students have their own computers, which a re often better than the computers we have at our school). We can submit a proposition that the critical point in the creative use of computers is over, and we should think how computers and new media may extend the designer’s perception and imagination.
keywords	Creation of a Form, Imagination, Metaphors, Computer Support of Form Searching
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	3642
authors	Asojo, Abimbola Oluwatoni
year	2000
title	Design Algorithms after Le Corbusier
source	ACADIA Quarterly, vol. 19, no. 4, pp. 17-24
doi	https://doi.org/10.52842/conf.acadia.2000.017
summary	Some views of design are the act as puzzle making, problem solving, evolutionary, and decision-making. All these focus on form generation as constructive, therefore characterizing design as a path-planning problem through a space of possibilities. Design problems consist sets of information divided into initial, intermediate, and goal states. Design in its simplest state consist of a set of operators, sequences (or paths) between initial and goals states. In this paper, I present design algorithms for Le Corbusier because of his distinct compositional techniques particularly for his “White Villas” in which some elements have been identified to recursively occur.
series	ACADIA
last changed	2022/06/07 07:54

_id	60e7
authors	Bailey, Rohan
year	2000
title	The Intelligent Sketch: Developing a Conceptual Model for a Digital Design Assistant
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 137-145
doi	https://doi.org/10.52842/conf.acadia.2000.137
summary	The computer is a relatively new tool in the practice of Architecture. Since its introduction, there has been a desire amongst designers to use this new tool quite early in the design process. However, contrary to this desire, most Architects today use pen and paper in the very early stages of design to sketch. Architects solve problems by thinking visually. One of the most important tools that the Architect has at his disposal in the design process is the hand sketch. This iterative way of testing ideas and informing the design process with images fundamentally directs and aids the architect’s decision making. It has been said (Schön and Wiggins 1992) that sketching is about the reflective conversation designers have with images and ideas conveyed by the act of drawing. It is highly dependent on feedback. This “conversation” is an area worthy of investigation. Understanding this “conversation” is significant to understanding how we might apply the computer to enhance the designer’s ability to capture, manipulate and reflect on ideas during conceptual design. This paper discusses sketching and its relation to design thinking. It explores the conversations that designers engage in with the media they use. This is done through the explanation of a protocol analysis method. Protocol analysis used in the field of psychology, has been used extensively by Eastman et al (starting in the early 70s) as a method to elicit information about design thinking. In the pilot experiment described in this paper, two persons are used. One plays the role of the “hand” while the other is the “mind”- the two elements that are involved in the design “conversation”. This variation on classical protocol analysis sets out to discover how “intelligent” the hand should be to enhance design by reflection. The paper describes the procedures entailed in the pilot experiment and the resulting data. The paper then concludes by discussing future intentions for research and the far reaching possibilities for use of the computer in architectural studio teaching (as teaching aids) as well as a digital design assistant in conceptual design.
keywords	CAAD, Sketching, Protocol Analysis, Design Thinking, Design Education
series	ACADIA
last changed	2022/06/07 07:54

_id	1f5c
authors	Beesley, Philip and Seebohm, Thomas
year	2000
title	Digital Tectonic Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 287-290
doi	https://doi.org/10.52842/conf.ecaade.2000.287
summary	Digital tectonic design is a fresh approach to architectural design methodology. Tectonics means a focus on assemblies of construction elements. Digital tectonics is an evolving methodology that integrates use of design software with traditional construction methods. We see digital tectonic design as a systematic use of geometric and spatial ordinances, used in combination with details and components directly related to contemporary construction. The current approach will, we hope, lead to an architectural curriculum based on generative form making where the computer can be used to produce systems of forms algorithmically. Digital design has tended to remain abstract, emphasizing visual and spatial arrangements often at the expense of materials and construction. Our pursuit is translation of these methods into more fully realized physical qualities. This method offers a rigorous approach based on close study of geometry and building construction elements. Giving a context for this approach, historical examples employing systematic tectonic design are explored in this paper. The underlying geometric ordinance systems and the highly tuned relationships between the details in these examples offer design vocabularies for use within the studio curriculum. The paper concludes with a detailed example from a recent studio project demonstrating particular qualities developed within the method. The method involves a wide range of scales, relating large-scale gestural and schematic studies to detailed assembly systems. Designing in this way means developing geometric strategies and, in parallel, producing detailed symbols or objects to be inserted. These details are assembled into a variety of arrays and groups. The approach is analogous to computer-aided designÕs tradition of shape grammars in which systems of spatial relationships are used to control the insertion of shapes within a space. Using this approach, a three-dimensional representation of a building is iteratively refined until the final result is an integrated, systematically organized complex of symbols representing physical building components. The resulting complex offers substantial material qualities. Strategies of symbol insertions and hierarchical grouping of elements are familiar in digital design practice. However these strategies are usually used for automated production of preconceived designs. In contrast to thsse normal approaches this presentation focuses on emergent qualities produced directly by means of the complex arrays of symbol insertions. The rhyth
keywords	3D CAD Systems, Design Practice, 3D Design Strategies
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	c42a
authors	Bermudez, J., Agutter, J., Brent, L., Syroid, N., Gondeck-Becker, D., Westenskow, D., Foresti, S. and Sharir, Y.
year	2000
title	Cyberprint: Toward an Architecture of Being
source	ACADIA Quarterly, vol. 19, no. 3, pp. 8-12
doi	https://doi.org/10.52842/conf.acadia.2000.008
summary	This project involves the design, construction and performance of an “architecture of being” that expresses selfhood in virtual space and real time using: (1) physiological data as its building material, (2) architectural design as its expressive intent, (3) digital space as its medium, (4) screen projection as its enveloping and viewing technique, (5) user interactivity and performance as its partner, and (6) interdisciplinary collaborations among Architecture, Choreography, Modern Dance, Music, Bioengineering, Medicine and Computer Science as its creative and technical contexts. The paper presents the implementation of the cyberPRINT during a series of techno-media performances at the Rose Wagner Performing Art Center in Salt Lake City, USA, in May 2000. This work is believed to be the first of its kind in the world. The cyberPRINT is building a new area of creative inquiry in Architecture by means of collaborations with the Arts and Sciences.
keywords	Performance; Data Visualization; Interdisciplinary; Virtual; Architecture
series	ACADIA
email
last changed	2022/06/07 07:52

_id	95b0
authors	Bermudez, J., Agutter, J., Lilly,. B., Syroid, N., Westenskow, D., Gondeck-Becker, D. Foresti, S. and Sharir, Y.
year	2000
title	CyberPRINT: Hacia una Arquitectura del Ser (CyberPRINT: Towards an Architecture of the Being)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 220-223
summary	This project involves the design, construction and performance of an “architecture of being” that expresses selfhood in virtual space and real time using: (1) physiological data as its building material, (2) architectural design as its expressive intent, (3) digital space as its medium, (4) screen projection as its enveloping and viewing technique, (5) user interactivity and performance as its partner, and (6) interdisciplinary collaborations among Architecture, Choreography, Modern Dance, Music, Bioengineering, Medicine and Computer Science as its creative and technical contexts. // The paper presents the implementation of the cyberPRINT during a series of techno-media performances at the Rose Wagner Performing Art Center in Salt Lake City, USA, in May 2000. This work is believed to be the first of its kind in the world. The cyberPRINT is building a new area of creative inquiry in Architecture by means of collaborations with the Arts and Sciences.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	8948
authors	Bertola Duarte, Rovenir
year	2001
title	AS APROXIMAÇÕES DO COMPUTADOR AO PROCESSO DE ENSINO/ APRENDIZADO DO PROJETO ARQUITETÔNICO (An Approach to Computing in the Teaching/Learning Proces in Architectural Project Design)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 207-209
summary	This article seeks to disclose part of the results obtained with the development of the master dissertation. (DUARTE [2], 2000) The several approach forms between the computers and the process teaching/learning of architectural design were investigated in this work, standing out, close moment the edict of MEC that regulated the introduction of the computers in the architecture schools in Brazil. Ten Brazilian schools of architecture were researched, through questionnaires and visits, in which four approach forms were detected, that were understood more deeply with a study of cases, highlighting: methods, supports, components and the teaching process and the design process built by the student.
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: