Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 564

Reformat results as: short short into frame detailed detailed into frame

_id	976f
authors	Cheng, Nancy and Kvan, Thomas
year	2000
title	Design Collaboration Strategies
source	Proceedings of the Fifth International Conference on Design and Decision Support Systems in Architecture, pp. 62-73
summary	This paper explains the logistical and technical issues involved in design collaboration and how toaddress them strategically in projects for design, teaching and research. Five years of arrangingprojects, studying peer results and involving novices in exchanges point out the benefits and pitfallsof Internet partnering. Rather than a single universal technical solution, multiple solutions exist: Technical means must betailored to specifics concerning the task and participants. The following factors need to be consideredin finding the best fit between technology and group design: 1) Collaboratorsí profiles, 2) Mutualvalue of produced information, 3) Collaboration structure, and 4) Logistical opportunities. Thesuccess of a virtual studio depends upon clear task definition, aligned participant expectations andsuitable engagement methods. We question the efforts required in the installation of expensive technologies for communication andvisualization. Often technical systems support ancillary and non-beneficial activity.
series	other
email
last changed	2003/05/15 10:29

_id	ddssar0005
id	ddssar0005
authors	Cheng, Nancy Yen-wen and Kvan, Thomas
year	2000
title	Design collaboration strategies
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	How can we best use computer technology to facilitate remote design teamwork? From looking at virtual studio collaborations, we propose that multiple solutions exist rather than a single one. In examining both published results and own student projects, we identify the following factors to be considered in finding the best fit between technology and group design: 1) Collaborators’ profiles; 2) Mutual value of produced information; 3) Collaboration structure and 4) Logistical opportunities
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0009
id	ddssar0009
authors	Findlay, Robert A. and Haugen, S. Lee
year	2000
title	From individual inquiry and attention to cohorts to a "collaborative critique": the use of student groups to support individual designers
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	This study explores learning settings and strategies related to design collaboration and critical thinking. To this end, theories of education and of cognitive learning were assembled to describe learning design collaboration. Student perceptions of their learning experiences were then gathered in structured interviews and focus groups, and were analyzed qualitatively for concepts, tendencies, and trends. The study also concerns the effects of collaboration on individual learning. An emphasis of the investigation has been on the context in which a person's mind learns. The activity of learning has been enriched by being in a context in which students can participate in the social construction of knowledge, in this way enhancing the processes of developing knowledge, decision-making, and design. We discovered that a "collaborative critique" evolves during the course of activity of groups of students as they shift from the protective behavior of individual competition, through bargaining away ideas in compromise or subduing differences in consensus building, to critical ideation and the constructive behavior of the "collaborative critique".
series	DDSS
last changed	2003/08/07 16:36

_id	b5f3
authors	Johnson, Brian R.
year	2000
title	Sustaining Studio Culture: How Well Do Internet Tools Meet the Needs of Virtual Design Studios?
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 15-22
doi	https://doi.org/10.52842/conf.ecaade.2000.015
summary	The Internet beckons seductively to students. The prospect of nearly instantaneous communication with acquaintances spread across the face of the earth is alluring. The ease with which rich graphical content can be made available to the world is stunning. The possibility of a design being seen by friends, family, and famous architects is tantalizing. Faculty are drawn by the potent synergy and learning that can be found in the opposition and cooperation of different cultural roots. It is probable that entire design studio sequences will be offered through distance-learning programs in the near future. Is that a good idea? Much has been written about "virtual design studios" in architecture schools and "virtual offices" in practice. Most offices have largely or totally abandoned drafting boards in favor of digital tools of production. Yet, regarding design, Ken Sanders, author of The Digital Architect, and Manager of Information Services at Zimmer Gunsul Frasca Partnership (ZGF), of Portland, Oregon, has written "we still make an effort to locate project teams together and always will". Production CAD work requires different kinds of interaction than design and design instruction. The experiments have been invaluable in developing strategies for use of the Internet as a component of a design studio series, but rarely depend entirely on use of the Internet for all course communications. In fact, most describe fairly isolated efforts to augment some aspect of traditional design environments using Internet tools (ftp, email, web). A few have implemented new pedagogic or collaboration paradigms (e.g., ETH’s phase(x)). This paper considers the traditional design studio in terms of formal and informal activities, characterizes the major Internet technologies with regard to the resulting interaction issues. In particular, it describes an area of informal work group communications that appears to be ill-supported with existing tools. The paper goes on to describe a web-based collaboration tool which was developed to address the need for less formal communication. The context for this development is the concept of a fully distributed collaboration environment with particular attention to questions of informal communication. Finally, it describes how the tool was deployed in an experimental "web studio" setting and student responses to use of the tool.
keywords	Virtual Design Studio, Collaboration, Online Communities, Web Tools
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:52

_id	2aec
authors	Oxman, Rivka
year	2000
title	Design media for the cognitive designer
source	Automation in Construction 9 (4) (2000) pp. 337-346
summary	Work on media for design which are responsive to the cognitive processes of the human designer are introduced as a paradigm for research and development. Design media are intended to support the cognitive nature of design and, particularly, the exploitation of design knowledge in computational environments. Basic theoretical assumptions are presented which underlie the development of design media. A central assumption is that designers share common forms of design knowledge which can be formalized, represented, and employed in computational environments. Generic knowledge is proposed as one such seminal form of design knowledge. We then develop a cognitive model which relates to the internal mental representations, strategies and mechanisms of generic design. The paper emphasizes the theoretical foundations of design media. This theoretical discussion is then exemplified through case studies presenting current research for the support of visual cognition in design. We introduce an approach to design schema as a visual form of generic design knowledge. Secondly we present a conceptual framework for the support of schema emergence in visual reasoning in design media. Finally, some implications of schema emergence in design collaboration are presented and discussed.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	899f
authors	Papamichael, K., Pal, V., Bourassa, N., Loffeld, J. and Capeluto, I.G.
year	2000
title	An Expandable Software Model for Collaborative Decision-Making During the Whole Building Life Cycle
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 19-28
doi	https://doi.org/10.52842/conf.acadia.2000.019
summary	Decisions throughout the life cycle of a building, from design through construction and commissioning to operation and demolition, require the involvement of multiple interested parties (e.g., architects, engineers, owners, occupants and facility managers). The performance of alternative designs and courses of action must be assessed with respect to multiple performance criteria, such as comfort, aesthetics, energy, cost and environmental impact. Several stand-alone computer tools are currently available that address specific performance issues during various stages of a building’s life cycle. Some of these tools support collaboration by providing means for synchronous and asynchronous communications, performance simulations, and monitoring of a variety of performance parameters involved in decisions about a building during building operation. However, these tools are not linked in any way, so significant work is required to maintain and distribute information to all parties. In this paper we describe a software model that provides the data management and process control required for collaborative decision-making throughout a building’s life cycle. The requirements for the model are delineated addressing data and process needs for decision making at different stages of a building’s life cycle. The software model meets these requirements and allows addition of any number of processes and support databases over time. What makes the model infinitely expandable is that it is a very generic conceptualization (or abstraction) of processes as relations among data. The software model supports multiple concurrent users, and facilitates discussion and debate leading to decision-making. The software allows users to define rules and functions for automating tasks and alerting all participants to issues that need attention. It supports management of simulated as well as real data and continuously generates information useful for improving performance prediction and understanding of the effects of proposed technologies and strategies.
keywords	Decision Making, Integration, Collaboration, Simulation, Building Life Cycle, Software.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	f8a3
authors	Tuzmen, Ayca
year	2000
title	Collaborative Building Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 93-99
doi	https://doi.org/10.52842/conf.ecaade.2000.093
summary	Studies on team performance have observed that some teams at the same stage in their development perform better than other teams, even of the same composition. Why is this? One of the main reasons is found to be a good team process. Researchers argue that collaborative process is an ideal case through which parties who see different aspects of a problem can constructively explore their differences and search for solutions that go beyond their own limited vision of what is possible. Much attention is now being paid to improvement of the design team process by establishing a collaborative environment in building design practice. Many scholars have prescribed various techniques and technology as ways of achieving collaboration in building design practice. A combination of these prescriptions does support design teams by facilitating one or more of the following: (a) team internal communication, (b) team external communication, (c) information sharing, and (d) decision making. Only recently have there been studies that have provided the strategies for integrating these techniques and technology for the establishment of a collaborative work environment. Researchers from various areas of research have this intention. This includes studies in Business Process Management (BPM), Business Process Re-Engineering (BPR), Total Quality Management (TQM), Project Management (PM), Workflow Management (WfM). All of these studies share one common feature. They all contribute to the study of the management of the team process. Despite the power of the concept and the history of successful application of process management techniques in building practice, the process management strategies are not a panacea. Rather it is a tool which, when properly used under appropriate circumstances, can aid design teams in the achievement of a collaborative design environment. The successful implementation or enactment of process management strategies in building design practice requires a mediator, a facilitator, or a project manager with a variety of managerial skills. However, it is not only enough to support major facilitators in the implementation or in the enactment of a design process that is planned for that teamwork. The performance of a design process should not only be depended on the skills or capabilities of tools that managers use to enact design processes. In order to achieve a collaborative design environment, members of the design team should also be given the support for monitoring and implementing of a collaborative design process. Team members should also have the ability to define, implement and track their personal subprocesses. Team members should also be able to monitor the process and be able to resolve the conflicts between their actions and other members' actions. A distributed process management environment is required in order to facilitate the management and control of the enactment of a collaborative design process. Such an environment should enable the control and monitoring of the enactment of a process and the resources required for its enactment. This paper presents the conceptual model of a process management environment that is developed in order to establish such a process management environment. It also discusses the findings of a study that is conducted for the validation and verification of this conceptual model.
keywords	Collaborative Design, Process Management, Workflow Management
series	eCAADe
type	normal paper
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:58

_id	ea49
authors	Yen-wen Cheng, Nancy and Kvan, Thomas
year	2000
title	Design Collaboration Strategies Estrategias para la Colaboración de Diseño a Larga Distancia
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 45-49
summary	This paper explains the logistical and technical issues involved in design collaboration and how to address them strategically in projects for design, teaching and research. Five years of arranging projects, studying peer results and involving novices in exchanges point out the benefits and pitfalls of Internet partnering. Rather than a single universal technical solution, multiple solutions exist: Technical means must be tailored to specifics concerning the task and participants. The following factors need to be considered in finding the best fit between technology and group design: 1) Collaborators' profiles, 2) Mutual value of produced information, 3) Collaboration structure, and 4) Logistical opportunities. The success of a virtual studio depends upon clear task definition, aligned participant expectations and suitable engagement methods. // We question the efforts required in the installation of expensive technologies for communication and visualization. Often technical systems support ancillary and non-beneficial activity. Matching needs and resources can be more critical than high-tech equipment. People motivated to interact will work around technical difficulties.
series	SIGRADI
email
last changed	2016/03/10 10:03

_id	b0e7
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2000
title	The Re-Convergence of Art and Science: A Vehicle for Creativity
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 491-500
doi	https://doi.org/10.52842/conf.caadria.2000.491
summary	Ever-increasing complexity in product design and the need to deliver a cost-effective solution that benefits from a dynamic approach requires the employment and adoption of innovative design methods which ensure that products are of the highest quality and meet or exceed customers' expectations. According to Bronowski (1976) science and art were originally two faces of the same human creativity. However, as civilisation advances and works became specialised, the dichotomy of science and art gradually became apparent. Hence scientists and artists were born, and began to develop work that was polar opposite. The sense of beauty itself became separated from science and was confined within the field of art. This dichotomy existed through mankind's efforts in advancing civilisation to its present state. This paper briefly examines the relationship between art and science through the ages and discusses their relatively recent re-convergence. Based on this hypothesis, this paper studies the current state of the convergence between arts and sciences and examines the current relationship between the two by considering real world applications and products. The study of such products and their successes and impact they had in the marketplace due to their designs and aesthetics rather than their advanced technology that had partially failed them appears to support this argument. This text further argues that a re-convergence between art and science is currently occurring and highlights the need for accelerating this process. It is suggested that re-convergence is a result of new technologies which are adopted by practitioners that include effective visualisation and communication of ideas and concepts. Such elements are widely found today in multimedia and Virtual Environments (VEs) where such tools offer increased power and new abilities to both scientists and designers as both venture in each other's domains. This paper highlights the need for the employment of emerging computer based real-time interactive technologies that are expected to enhance the design process through real-time prototyping and visualisation, better decision-making, higher quality communication and collaboration, lessor error and reduced design cycles. Effective employment and adoption of innovative design methods that ensure products are delivered on time, and within budget, are of the highest quality and meet customer expectations are becoming of ever increasing importance. Such tools and concepts are outlined and their roles in the industries they currently serve are identified. Case studies from differing fields are also studied. It is also suggested that Virtual Reality interfaces should be used and given access to Computer Aided Design (CAD) model information and data so that users may interrogate virtual models for additional information and functionality. Adoption and appliance of such integrated technologies over the Internet and their relevance to electronic commerce is also discussed. Finally, emerging software and hardware technologies are outlined and case studies from the architecture, electronic games, and retail industries among others are discussed, the benefits are subsequently put forward to support the argument. The requirements for adopting such technologies in financial, skills required and process management terms are also considered and outlined.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	9b44
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2000
title	The Importance of Virtual Environments in the Design of Electronic Games and Their Relevance to Architecture
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 181-185
doi	https://doi.org/10.52842/conf.ecaade.2000.181
summary	Ever increasing complexity in architectural design and the need to deliver a cost effective solution requires the employment and adoption of innovative design methods. Although technological changes have entered the field of architecture at a slower pace, the recent adoption of 3D modelling, Virtual Environment and multimedia represent significant changes in architectural design, visualisation and presentation. These now include tools for conceptualisation, design synthesis, design presentation, desktop publishing, animation, Internet and hypermedia authoring. Uddin argues that the major activities involved in the creative and dynamic process of architectural design deal with conceptualisation, visualisation and expression of alternative ideas through two-dimensional and three-dimensional model. This paper highlights the need for the employment of emerging computer based real-time interactive technologies that are expected to enhance the design process through better decision-making, higher quality communication and collaboration, error reduction, spatial awareness, interactive design and real-time visualisation.
keywords	CAD, Game Design, Virtual Reality, Virtual Environments, Virtual Prototyping, Internet Technologies, Architecture
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	b088
authors	Al-Qawasmi, Jamal
year	2000
title	Learning Virtually: A Paradigm Shift in Design Education
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 123-133
doi	https://doi.org/10.52842/conf.caadria.2000.123
summary	We still think of architectural design education in terms of a "classroom" paradigm, that is, of an instructor teaching design skills to a class of students in a face-to-face format. However, emerging communication and collaboration technologies have created tremendous new opportunities to distribute students and faculty, while maintaining a close personal contact. This paper discusses and characterizes several aspects of the evolving paradigm of teaching design made possible by the ability to work in shared virtual environments.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	9d10
authors	Anders, Peter and Livingstone, Daniel
year	2001
title	STARS: Shared Transatlantic Augmented Reality System
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 350-355
doi	https://doi.org/10.52842/conf.acadia.2001.350
summary	Since October 2000 the authors have operated a laboratory, the Shared Transatlantic Augmented Reality System (STARS), for exploring telepresence in the domestic environment. The authors, an artist and an architect, are conducting a series of experiments to test their hypotheses concerning mixed reality and supportive environments. This paper describes these hypotheses, the purpose and construction of the lab, and preliminary results from the ongoing collaboration.
keywords	Mixed Reality, Cybrid, Art, Cyberspace, CAiiA-STAR
series	ACADIA
email
last changed	2022/06/07 07:54

_id	1f5c
authors	Beesley, Philip and Seebohm, Thomas
year	2000
title	Digital Tectonic Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 287-290
doi	https://doi.org/10.52842/conf.ecaade.2000.287
summary	Digital tectonic design is a fresh approach to architectural design methodology. Tectonics means a focus on assemblies of construction elements. Digital tectonics is an evolving methodology that integrates use of design software with traditional construction methods. We see digital tectonic design as a systematic use of geometric and spatial ordinances, used in combination with details and components directly related to contemporary construction. The current approach will, we hope, lead to an architectural curriculum based on generative form making where the computer can be used to produce systems of forms algorithmically. Digital design has tended to remain abstract, emphasizing visual and spatial arrangements often at the expense of materials and construction. Our pursuit is translation of these methods into more fully realized physical qualities. This method offers a rigorous approach based on close study of geometry and building construction elements. Giving a context for this approach, historical examples employing systematic tectonic design are explored in this paper. The underlying geometric ordinance systems and the highly tuned relationships between the details in these examples offer design vocabularies for use within the studio curriculum. The paper concludes with a detailed example from a recent studio project demonstrating particular qualities developed within the method. The method involves a wide range of scales, relating large-scale gestural and schematic studies to detailed assembly systems. Designing in this way means developing geometric strategies and, in parallel, producing detailed symbols or objects to be inserted. These details are assembled into a variety of arrays and groups. The approach is analogous to computer-aided designÕs tradition of shape grammars in which systems of spatial relationships are used to control the insertion of shapes within a space. Using this approach, a three-dimensional representation of a building is iteratively refined until the final result is an integrated, systematically organized complex of symbols representing physical building components. The resulting complex offers substantial material qualities. Strategies of symbol insertions and hierarchical grouping of elements are familiar in digital design practice. However these strategies are usually used for automated production of preconceived designs. In contrast to thsse normal approaches this presentation focuses on emergent qualities produced directly by means of the complex arrays of symbol insertions. The rhyth
keywords	3D CAD Systems, Design Practice, 3D Design Strategies
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	5227
authors	Bessone, Miriam and Mantovani, Graciela
year	2000
title	Procesos Proyectuales Alternativos: em el Inicio del Aprendizaje del Diseño Arquitectonico (Alternative Design Processes: At an Early Stage in the Learning of Architectural Design)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 364-366
summary	Building of knowledge and the traditional methods to approach it are changed by new technologies. The coexistence of two cultures, one of them based on written text and the other multitextual, are presented as an interesting exploring field. Accordingly, improvement in building of design learning, “new logics of perception” and “new projectable logics, are the main challenges to be addressed in a Research - Action Programme in harmonious interaction between both cultures and their instruments (analogous and digitals). Recognizing the existence of fields teachers are not trained in, an interaction teacher - pupil in didactic strategies is considered to be necessary.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2fb3
authors	Bhavnani, S.K.
year	2000
title	Designs Conducive to the Use of Efficient Strategies
source	Proceedings of DIS'00, (2000), 338-345
summary	Studies on the widespread inefficient use of complex computer applications have suggested that users need to learn efficient strategies in addition to learning how to use tools. This paper argues that our growing understanding of strategic knowledge can be used to guide designers develop systems which are conducive to the use of efficient strategies. The paper first describes ten general strategies which appear to be useful across three computer application domains. Next, the paper discusses the functionalities required to execute the ten strategies, and what makes them conducive to strategy use. An analysis of six major computer applications in three domains reveals that these functionalities are not consistently offered, and how their absence directly affects the performance of complex tasks. The analysis leads to questions related to the generality of the results, the problem of featurism, and how strategy-conducive systems could facilitate the transfer of knowledge across applications. The paper concludes by briefly describing how we intend to use the strategy framework to develop analysis methods for designers and trainers.
keywords	Strategy; Strategic Knowledge; Efficiency; Design; Training
series	other
email
last changed	2003/11/21 15:16

_id	9bc4
authors	Bhavnani, S.K. and John, B.E.
year	2000
title	The Strategic Use of Complex Computer Systems
source	Human-Computer Interaction 15 (2000), 107-137
summary	Several studies show that despite experience, many users with basic command knowledge do not progress to an efficient use of complex computer applications. These studies suggest that knowledge of tasks and knowledge of tools are insufficient to lead users to become efficient. To address this problem, we argue that users also need to learn strategies in the intermediate layers of knowledge lying between tasks and tools. These strategies are (a) efficient because they exploit specific powers of computers, (b) difficult to acquire because they are suggested by neither tasks nor tools, and (c) general in nature having wide applicability. The above characteristics are first demonstrated in the context of aggregation strategies that exploit the iterative power of computers.Acognitive analysis of a real-world task reveals that even though such aggregation strategies can have large effects on task time, errors, and on the quality of the final product, they are not often used by even experienced users. We identify other strategies beyond aggregation that can be efficient and useful across computer applications and show how they were used to develop a new approach to training with promising results.We conclude by suggesting that a systematic analysis of strategies in the intermediate layers of knowledge can lead not only to more effective ways to design training but also to more principled approaches to design systems. These advances should lead users to make more efficient use of complex computer systems.
series	other
email
last changed	2003/11/21 15:16

_id	f288
authors	Bille, Pia
year	1999
title	Integrating GIS and Electronic Networks In Urban Design and Planning
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
doi	https://doi.org/10.52842/conf.ecaade.1999.722
summary	In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords	Urban Planning, Electronic Collaboration, GIS, Data Bases
series	eCAADe
email
last changed	2022/06/07 07:54

_id	4cc0
authors	Bouchlaghem, N., Khosowshahi, F. and White, J.
year	2000
title	Virtual reality as a visualisation tool: Benefits and constraints
source	CIDAC, Volume 2 Issue 4 November 2000 pp. 216-224
summary	The benefits and applications of virtual reality (VR) in the construction industry have been investigated for almost a decade. However, the practical implementation of VR in the construction industry has yet to reach maturity owing to technical constraints. The need for effective information management presents challenges: both transfer of building data to, and organisation of building information within, the virtual environment require consideration. This paper reviews the applications and benefits of VR in the built environment field and reports on a collaboration between Loughborough University and South Bank University to overcome constraints on the use of the overall VR model for whole lifecycle visualisation. The work at each research centre is concerned with an aspect of information management within VR applications for the built environment, and both data transfer and internal data organisation have been investigated. In this paper, similarities and differences between computer-aided design (CAD) and VR packages are first discussed. Three different approaches to the creation of VR models during the design stage are identified and described, with a view to providing sharing understanding across the interdiscipliary groups involved. The suitable organisation of building information within the virtual environment is then further investigated. This work focused on the visualisation of the degradation of a building, through its lifespan, with the view to provide a visual aid for developing an effective and economic project maintenance programme. Finally consideration is given to the potential of emerging standards to facilitate an integrated use of VR. The convergence towards similar data structures in VR and other construction packages may enable visualisation to be better utilised in the overall lifecycle model.
keywords	Virtual Reality, Information Management, Data Exchange, 3D Modelling, 4D Visualisation
series	journal paper
last changed	2003/05/15 21:23

_id	b037
authors	Brusasco, P.L., Caneparo, L., Carrara, G., Fioravanti, A., Novembri, G. and Zorgno, Anna Maria
year	2000
title	Computer Supported Design Studio
source	Automation in Construction 9 (4) (2000) pp. 393-408
summary	The paper presents the ongoing experimentation of a Computer Supported Design Studio (CSDS). CSDS is part of our continuing effort to integrate computers and networks in the design studio. We recognise three corner stones to CSDS: memory, process and collaboration. They offer a framework for the interpretation of the pedagogical aspects of the teaching of architectural design in relation to the innovations produced by information and communication technologies. The theme of the 1998 CSDS is a railway station in Turin, Italy, to be incorporated in a reorganised rail transport system. The choice of this theme emphasises the realistic simulation aspects of the studio, where technical problems need to be interpreted from an architectural point of view.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	8802
authors	Burry, Mark, Dawson, Tony and Woodbury, Robert
year	1999
title	Learning about Architecture with the Computer, and Learning about the Computer in Architecture
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 374-382
doi	https://doi.org/10.52842/conf.ecaade.1999.374
summary	Most students commencing their university studies in architecture must confront and master two new modes of thought. The first, widely known as reflection-in-action, is a continuous cycle of self-criticism and creation that produces both learning and improved work. The second, which we call here design making, is a process which considers building construction as an integral part of architectural designing. Beginning students in Australia tend to do neither very well; their largely analytic secondary education leaves the majority ill-prepared for these new forms of learning and working. Computers have both complicated and offered opportunities to improve this situation. An increasing number of entering students have significant computing skill, yet university architecture programs do little in developing such skill into sound and extensible knowledge. Computing offers new ways to engage both reflection-in-action and design making. The collaboration between two Schools in Australia described in detail here pools computer-based learning resources to provide a wider scope for the education in each institution, which we capture in the phrase: Learn to use computers in architecture (not use computers to learn architecture). The two shared learning resources are Form Making Games (Adelaide University), aimed at reflection-in-action and The Construction Primer (Deakin University and Victoria University of Wellington), aimed at design making. Through contributing to and customising the resources themselves, students learn how designing and computing relate. This paper outlines the collaborative project in detail and locates the initiative at a time when the computer seems to have become less self-consciously assimilated within the wider architectural program.
keywords	Reflection-In-Action, Design Making, Customising Computers
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: