Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 614

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	1838
authors	Akleman, E., Chen, J. and Meric, B.
year	2000
title	Intuitive and Effective Design of Periodic Symmetric Tiles
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 123-127
doi	https://doi.org/10.52842/conf.acadia.2000.123
summary	This paper presents a new approach for intuitive and effective design of periodic symmetric tiles. We observe that planar graphs can effectively represent symmetric tiles and graph drawing provides an intuitive paradigm for designing symmetric tiles. Moreover, based on our theoretical work to represent hexagonal symmetry by rectangular symmetry, we are able to present all symmetric tiles as graphs embedded on a torus and based on simple modulo operations. This approach enables us to develop a simple and efficient algorithm, which has been implemented in Java. By using this software, designers, architects and artists can create interesting symmetric tiles directly on the web. We also have designed a few examples of symmetric tiles to show the effectiveness of the approach.
series	ACADIA
last changed	2022/06/07 07:54

_id	36ab
authors	Chiu, M.-L., Lin, Y.-T., Tseng, K.-W. and Chen, C.-H.
year	2000
title	Museum of Interface. Designing the Virtual Environment
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 471-480
doi	https://doi.org/10.52842/conf.caadria.2000.471
summary	A virtual environment (VE) has been designed for functioning as a three-dimensional interface to a repository of images and sounds. This paper attempts to study design interface in VEs. This study first examines the characteristics of VEs. The difference between physical and virtual environments is also studied. The relationship between both is classified as three types, i.e. complement, replacement, or independence. Then it establishes the design interface in VEs, and presents an experimental project, the virtual architecture museum (VAM). Four elements of VEs are highlighted, i.e. wayfinding, linkage, context, and atmosphere. In VAM, the interface is implemented on the web and is integrated with an architectural database. It is found that the appropriateness of design interface can enhance the users' spatial awareness, and consequently facilitate the task of navigation and wayfinding within VEs. The context and atmosphere of VEs can be defined by means of simile or metaphor through the visual or acoustic experience for gaining senses of a place.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ec4d
authors	Croser, J.
year	2001
title	GDL Object
source	The Architect’s Journal, 14 June 2001, pp. 49-50
summary	It is all too common for technology companies to seek a new route to solving the same problem but for the most part the solutions address the effect and not the cause. The good old-fashioned pencil is the perfect example where inventors have sought to design-out the effect of the inherent brittleness of lead. Traditionally different methods of sharpening were suggested and more recently the propelling pencil has reigned king, the lead being supported by the dispensing sleeve thus reducing the likelihood of breakage. Developers convinced by the Single Building Model approach to design development have each embarked on a difficult journey to create an easy to use feature packed application. Unfortunately it seems that the two are not mutually compatible if we are to believe what we see emanating from Technology giants Autodesk in the guise of Architectural Desktop 3. The effect of their development is a feature rich environment but the cost and in this case the cause is a tool which is far from easy to use. However, this is only a small part of a much bigger problem, Interoperability. You see when one designer develops a model with one tool the information is typically locked in that environment. Of course the geometry can be distributed and shared amongst the team for use with their tools but the properties, or as often misquoted, the intelligence is lost along the way. The effect is the technological version of rubble; the cause is the low quality of data-translation available to us. Fortunately there is one company, which is making rapid advancements on the whole issue of collaboration, and data sharing. An old timer (Graphisoft - famous for ArchiCAD) has just donned a smart new suit, set up a new company called GDL Technology and stepped into the ring to do battle, with a difference. The difference is that GDL Technology does not rely on conquering the competition, quite the opposite in fact their success relies upon the continued success of all the major CAD platforms including AutoCAD, MicroStation and ArchiCAD (of course). GDL Technology have created a standard data format for manufacturers called GDL Objects. Product manufacturers such as Velux are now able to develop product libraries using GDL Objects, which can then be placed in a CAD model, or drawing using almost any CAD tool. The product libraries can be stored on the web or on CD giving easy download access to any building industry professional. These objects are created using scripts which makes them tiny for downloading from the web. Each object contains 3 important types of information: · Parametric scale dependant 2d plan symbols · Full 3d geometric data · Manufacturers information such as material, colour and price Whilst manufacturers are racing to GDL Technologies door to sign up, developers and clients are quick to see the benefit too. Porsche are using GDL Objects to manage their brand identity as they build over 300 new showrooms worldwide. Having defined the building style and interior Porsche, in conjunction with the product suppliers, have produced a CD-ROM with all of the selected building components such as cladding, doors, furniture, and finishes. Designing and detailing the various schemes will therefore be as straightforward as using Lego. To ease the process of accessing, sizing and placing the product libraries GDL Technology have developed a product called GDL Object Explorer, a free-standing application which can be placed on the CD with the product libraries. Furthermore, whilst the Object Explorer gives access to the GDL Objects it also enables the user to save the object in one of many file formats including DWG, DGN, DXF, 3DS and even the IAI's IFC. However, if you are an AutoCAD user there is another tool, which has been designed especially for you, it is called the Object Adapter and it works inside of AutoCAD 14 and 2000. The Object Adapter will dynamically convert all GDL Objects to AutoCAD Blocks during placement, which means that they can be controlled with standard AutoCAD commands. Furthermore, each object can be linked to an online document from the manufacturer web site, which is ideal for more extensive product information. Other tools, which have been developed to make the most of the objects, are the Web Plug-in and SalesCAD. The Plug-in enables objects to be dynamically modified and displayed on web pages and Sales CAD is an easy to learn and use design tool for sales teams to explore, develop and cost designs on a Notebook PC whilst sitting in the architects office. All sales quotations are directly extracted from the model and presented in HTML format as a mixture of product images, product descriptions and tables identifying quantities and costs. With full lifecycle information stored in each GDL Object it is no surprise that GDL Technology see their objects as the future for building design. Indeed they are not alone, the IAI have already said that they are going to explore the possibility of associating GDL Objects with their own data sharing format the IFC. So down to the dirty stuff, money and how much it costs? Well, at the risk of sounding like a market trader in Petticoat Lane, "To you guv? Nuffin". That's right as a user of this technology it will cost you nothing! Not a penny, it is gratis, free. The product manufacturer pays for the license to host their libraries on the web or on CD and even then their costs are small costing from as little as 50p for each CD filled with objects. GDL Technology has come up trumps with their GDL Objects. They have developed a new way to solve old problems. If CAD were a pencil then GDL Objects would be ballistic lead, which would never break or loose its point. A much better alternative to the strategy used by many of their competitors who seek to avoid breaking the pencil by persuading the artist not to press down so hard. If you are still reading and you have not already dropped the magazine and run off to find out if your favorite product supplier has already signed up then I suggest you check out the following web sites www.gdlcentral.com and www.gdltechnology.com. If you do not see them there, pick up the phone and ask them why.
series	journal paper
email
last changed	2003/04/23 15:14

_id	d931
authors	Gabryszewski, Artur B.
year	1999
title	Idea of an Intelligent Building - Development Prospects
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 739-743
doi	https://doi.org/10.52842/conf.ecaade.1999.739
summary	An ever-increasing number of offices as also residential buildings are being realised by designers and investors in accordance with the concept of an intelligent building. Houses of the new generation are being constructed. This is possible thanks to dynamic progress in the development of computer and microprocessor engineering techniques. Putting into reality the idea of the 'intelligent building' will become one of the most interesting assignments of Polish building industry in the rapidly approaching XXI century. The term 'intelligent building' first appeared in the eighties. The idea behind this conception is aspiring to create a friendly, work supporting, effective environment. The revolution in telecommunications and information technology along with change in the standards of office work, have caused computer networks and modem systems of automation and protection, to invade buildings. From the technical point of view, an intelligent building is an object in which all the subsystems co-operate with each other, forming a friendly environment for man. For users of an intelligent building, the most important issue is realisation of the following aims: object management which includes both control of human resources and automation systems in the building and also efficient management of the building space in such a way that the costs of its utilisation are minimised. The possibility of optional installation of modern systems and equipment should be facilitated by the architecture itself. Therefore, the specifics of all the building elements should be taken into account right at the designing stage. The following features characterise an intelligent building: integration of telecommunication systems in the building, central management and supervision system and utilisation of structural cabling as the carrier of signals controlling most of the systems in the building. Presently, there is no building in Poland that could be characterised by the three features mentioned.
keywords	High-tech Architecture, Ecology, CAAD
series	eCAADe
email
last changed	2022/06/07 07:50

_id	fa1b
authors	Haapasalo, H.
year	2000
title	Creative computer aided architectural design An internal approach to the design process
source	University of Oulu (Finland)
summary	This survey can be seen as quite multidisciplinary research. The basis for this study has been inapplicability of different CAD user interfaces in architectural design. The objective of this research is to improve architectural design from the creative problem-solving viewpoint, where the main goal is to intensify architectural design by using information technology. The research is linked to theory of methods, where an internal approach to design process means studying the actions and thinking of architects in the design process. The research approach has been inspired by hermeneutics. The human thinking process is divided into subconscious and conscious thinking. The subconscious plays a crucial role in creative work. The opposite of creative work is systematic work, which attempts to find solutions by means of logical inference. Both creative and systematic problem solving have had periods of predominance in the history of Finnish architecture. The perceptions in the present study indicate that neither method alone can produce optimal results. Logic is one of the tools of creativity, since the analysis and implementation of creative solutions require logical thinking. The creative process cannot be controlled directly, but by creating favourable work conditions for creativity, it can be enhanced. Present user interfaces can make draughting and the creation of alternatives quicker and more effective in the final stages of designing. Only two thirds of the architects use computers in working design, even the CAD system is being acquired in greater number of offices. User interfaces are at present inflexible in sketching. Draughting and sketching are the basic methods of creative work for architects. When working with the mouse, keyboard and screen the natural communication channel is impaired, since there is only a weak connection between the hand and the line being drawn on the screen. There is no direct correspondence between hand movements and the lines that appear on the screen, and the important items cannot be emphasized by, for example, pressing the pencil more heavily than normally. In traditional sketching the pen is a natural extension of the hand, as sketching can sometimes be controlled entirely by the unconscious. Conscious efforts in using the computer shift the attention away from the actual design process. However, some architects have reached a sufficiently high level of skill in the use of computer applications in order to be able to use them effectively in designing without any harmful effect on the creative process. There are several possibilities in developing CAD systems aimed at architectural design, but the practical creative design process has developed during a long period of time, in which case changing it in a short period of time would be very difficult. Although CAD has had, and will have, some evolutionary influences on the design process of architects as an entity, the future CAD user interface should adopt its features from the architect's practical and creative design process, and not vice versa.
keywords	Creativity, Systematicism, Sketching
series	thesis:PhD
email
more	http://herkules.oulu.fi/isbn9514257545/
last changed	2003/02/12 22:37

_id	ga0008
id	ga0008
authors	Koutamanis, Alexander
year	2000
title	Redirecting design generation in architecture
source	International Conference on Generative Art
summary	Design generation has been the traditional culmination of computational design theory in architecture. Motivated either by programmatic and functional complexity (as in space allocation) or by the elegance and power of representational analyses (shape grammars, rectangular arrangements), research has produced generative systems capable of producing new designs that satisfied certain conditions or of reproducing exhaustively entire classes (such as all possible Palladian villas), comprising known and plausible new designs. Most generative systems aimed at a complete spatial design (detailing being an unpopular subject), with minimal if any intervention by the human user / designer. The reason for doing so was either to give a demonstration of the elegance, power and completeness of a system or simply that the replacement of the designer with the computer was the fundamental purpose of the system. In other words, the problem was deemed either already resolved by the generative system or too complex for the human designer. The ongoing democratization of the computer stimulates reconsideration of the principles underlying existing design generation in architecture. While the domain analysis upon which most systems are based is insightful and interesting, jumping to a generative conclusion was almost always based on a very sketchy understanding of human creativity and of the computer's role in designing and creativity. Our current perception of such matters suggests a different approach, based on the augmentation of intuitive creative capabilities with computational extensions. The paper proposes that architectural generative design systems can be redirected towards design exploration, including the development of alternatives and variations. Human designers are known to follow inconsistent strategies when confronted with conflicts in their designs. These strategies are not made more consistent by the emerging forms of design analysis. The use of analytical means such as simulation, couple to the necessity of considering a rapidly growing number of aspects, means that the designer is confronted with huge amounts of information that have to be processed and integrated in the design. Generative design exploration that can combine the analysis results in directed and responsive redesigning seems an effective method for the early stages of the design process, as well as for partial (local) problems in later stages. The transformation of generative systems into feedback support and background assistance for the human designer presupposes re-orientation of design generation with respect to the issues of local intelligence and autonomy. Design generation has made extensive use of local intelligence but has always kept it subservient to global schemes that tended to be holistic, rigid or deterministic. The acceptance of local conditions as largely independent structures (local coordinating devices) affords a more flexible attitude that permits not only the emergence of internal conflicts but also the resolution of such conflicts in a transparent manner. The resulting autonomy of local coordinating devices can be expanded to practically all aspects and abstraction levels. The ability to have intelligent behaviour built in components of the design representation, as well as in the spatial and building elements they signify, means that we can create the new, sharper tools required by the complexity resulting from the interpretation of the built environment as a dynamic configuration of co-operating yet autonomous parts that have to be considered independently and in conjunction with each other. P.S. The content of the paper will be illustrated by a couple of computer programs that demonstrate the princples of local intelligence and autonomy in redesigning. It is possible that these programs could be presented as independent interactive exhibits but it all depends upon the time we can make free for the development of self-sufficient, self-running demonstrations until December.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	a25e
authors	Loy, Hollis A.
year	1999
title	Foundation for a Thorough CAAD Education
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 301-308
doi	https://doi.org/10.52842/conf.ecaade.1999.301
summary	The birth and development of computing is considered by most as one of the greatest technological achievements of the twentieth century. Since the integration of computers in the built environment, over two decades ago, computing methods developed into efficient designing and calculating tools. In contrast, accelerating advancements in computing technology have created generation gaps amongst architects. There are inexperienced, novice, intermediate and advanced computer-capable architects. If each group was asked to define CAAD, some would still describe it as a computer program for technical draughting. Others may define CAAD (Computer Aided Architectural Design) as a vast array of digital media in CAD, multimedia and DTP, assisting architects in compiling visual presentations. Currently, most architectural schools are capable of instructing most, if not all, facets of CAAD (2D & 3D CAD, model rendering, photo montage, brochure layouts, etc.). However, this knowledge is accumulated at random throughout the course of study. "Computer Graphics for Architects" is the latest educational development in Europe bridging generation gaps with senior architects and serving as an introductory CAAD seminar to beginning architecture students. This book and lecture presents a gallery of recent architectural CAD, multimedia, and DTP presentations practiced in Europe´s second largest architectural firm. The terminology is user-friendly and its content concentrates on responding to the most often posed questions by CAAD beginners relating to: (1) Terminology (2) Appearance (3) Time Consumption (4) Cost Techniques introduced are independent of any platform. The goal is to summarize quickly and effectively the countless possibilities of presentations applicable in architecture practice. "Computer Graphics for Architects" provides a direction for future presentations and motivates students to excel in CAAD.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	6722
authors	Marques, Sandra Oliveira and Goulette, Jean-Pierre
year	2000
title	Architecture and Cyberspace: Reciprocal Spatial Contamination (Architecture and Cyberspace: Reciprocal Spatial Contamination)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 81-83
summary	Fascinated by the possibility of designing the world, human being has always searched for tools to mediate this process. Cyberspace became one of this tools. Virtual technologies associated to communicational technologies are changing human’s cultural, social, and material context, consequently changing the idea of architecture itself. The decreasing material content of our activities and their increasing perceptual, communicative and cognitive contents are drawing a new framework to our spatial experiences. Objects, spaces, buildings and institutions can now be constructed, navigated, experienced and manipulated across cyberspace. The particular focus in this paper is to discuss the architectural aspects of the Virtual Architectures (VAs) and an initial framework for its design.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	17ae
authors	McCullogh, M.
year	2000
title	Abstracting Craft: The Practised Digital Hand
source	MIT Press, Cambridge Mass.
summary	Can designing for computers be a craft? This is the question this book sets out to answer. At first sight, the situation is unpromising: craft is the work of hands, and "hands are underrated," in modern life; especially as computers are seen as abstract, conceptual, creations of pure mind. Yet since computation has become a medium, rather than just a tool kit, the correspondence between digital work and traditional craft is increasing. Modern software products, though immaterial, are nevertheless the creation of "practised hands" and eyes, as well as minds. Moreover, to craft is to care: humane values can - and should - inform a software designer's work just as a potter's or carpenter's. McCullough gives all those who work with code the chance to proclaim: "I am not a programmer! I am a digital craftsperson!"
series	other
email
last changed	2003/04/23 15:14

_id	2a47
authors	Mortola, E., Giangrande, A., Mirabelli, P. and Fortuzzi, A.
year	1999
title	Interactive Didactic Modules for On-Line Learning via Internet
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 273-278
doi	https://doi.org/10.52842/conf.ecaade.1999.273
summary	On-line learning can become a very efficient method of teaching in the University of the future. The Students can plan their curricula by selecting the offers of some universities coordinated that meet their specific aims. The communication interchange between student and teacher can be enriched through new forms of interaction via network technology. Laboratories of interactive design, which involve the participation of citizens, can become a good occasion to learn designing linked to the human needs. The architect who is interested in the sustainable development has to consider local needs and interact with users to build a new environment full of local values.
keywords	On-Line Learning, Internet, Teaching Modules, Participation, Collaborative Design, Neighbourhood Municipal Laboratories
series	eCAADe
email
more	http://rmac.arch.uniroma3.it
last changed	2022/06/07 07:58

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ed24
authors	Zarnowiecka, Jadwiga C.
year	2000
title	Promise and Reality - For Three Times
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 331-334
doi	https://doi.org/10.52842/conf.ecaade.2000.331
summary	Promise and Reality - such a clear and straightforward problem mentioned in the conference title makes one look back and reflect on the subject. I have distinguished three groups: teaching of CAAD, databases, AI tools in designing. All the conclusions drawn in the case of each problem, in fact, are to broaden and perfect the forms of education of the youth and students, of job circles and the local ones.
keywords	Teaching of CAAD, Databases, AI Tools in Designing, Fractal Geometry
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:57

_id	5cba
authors	Anders, Peter
year	1999
title	Beyond Y2k: A Look at Acadia's Present and Future
source	ACADIA Quarterly, vol. 18, no. 1, p. 10
doi	https://doi.org/10.52842/conf.acadia.1999.x.o3r
summary	The sky may not be falling, but it sure is getting closer. Where will you when the last three zeros of our millennial odometer click into place? Computer scientists tell us that Y2K will bring the world’s computer infrastructure to its knees. Maybe, maybe not. But it is interesting that Y2K is an issue at all. Speculating on the future is simultaneously a magnifying glass for examining our technologies and a looking glass for what we become through them. "The future" is nothing new. Orwell's vision of totalitarian mass media did come true, if only as Madison Avenue rather than Big Brother. Futureboosters of the '50s were convinced that each garage would house a private airplane by the year 2000. But world citizens of the 60's and 70's feared a nuclear catastrophe that would replace the earth with a smoking crater. Others - perhaps more optimistically -predicted that computers were going to drive all our activities by the year 2000. And, in fact, theymay not be far off... The year 2000 is symbolic marker, a point of reflection and assessment. And - as this date is approaching rapidly - this may be a good time to come to grips with who we are and where we want to be.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	2aca
authors	Faucher, Didier and Nivet, Marie-Laure
year	2000
title	Playing with design intents: integrating physical and urban constraints in CAD
source	Automation in Construction 9 (1) (2000) pp. 93-105
summary	Our work deals with the exploration of a universe of forms that satisfy some design intents. That is, we substitute a "generate and test" approach for a declarative approach in which an object is created from its properties. In this paper we present an original method that takes into account design intents relative to sunlight, visibility and urban regulation. First of all we study how current CAD tools have considered these properties until now. Our conclusion is that the classical design/simulation/analysis process does not suit design practices, especially in the early stages. We think that an improved CAD system should offer the architect the option of manipulating abstract information such as design intents. We define an intent as a conceptual expression of constraints having an influence on the project. For instance, a visual intent will be stated with no reference to vision geometry: "from this place, I want to see the front of the new building". We show how to represent each of these constraints with a 3D volume associated to some characteristics. If some solutions exist, we are sure that they are included in these volumes. For physical phenomena we compute the volume geometry using the principles of inverse simulation. In the case of urban regulation we apply deduction rules. Design intents are solved by means of geometrical entities that represent openings or obstructions in the project. Computing constraint volumes is a way of guiding the architect in his exploration of solutions. Constraint volumes are new spaces that can restore the link between form and phenomenon in a CAD tool. Our approach offers the designer the possibility of manipulating design intents.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ga0012
id	ga0012
authors	Galanter, Philip
year	2000
title	GA2: a Programming Environment for Abstract Generative Fine Art
source	International Conference on Generative Art
summary	Fine artists looking to use computers to create generative works, especially those artists inclined towards abstraction, often face an uncomfortable choice in the selection of software tools. On the one hand there are a number of commercial and shareware programs available which implement a few techniques in an easy to use GUI environment. Unfortunately such programs often impose a certain look or style and are not terribly versatile or expressive. The other choice seems to be writing code from scratch, in a language such as c or Java. This can be very time consuming as every new work seems to demand a new program, and the artist's ability to write code can seldom keep pace with his ability to imagine new visual ideas. This paper describes a software system created by the author called GA2 which has been implemented in the Matlab software environment. By layering GA2 over Matlab the artist can take advantage of a very mature programming environment which includes extensive mathematical libraries, simple graphics routines, GUI construction tools, built-in help facilities, and command line, batch mode, and GUI modes of interaction. In addition, GA2 is very portable and can run on Macintosh, Windows, and Unix systems with almost no incremental effort for multi-platform support. GA2 is a work in progress and an extension of the completed GA1 environment. It is medium independent, and can be used for all manner of image, animation, and sound production. GA1 includes a complete set of genetic algorithm operations for breeding families of graphical marks, a database function for managing and recalling various genes, a set of statistical operations for creating various distributions of marks on a canvas or animation frame, a unique Markov-chain-likeoperator for generating families of visually similar lines or paths, and a complete L-system implementation. GA2 extends GA1 by adding more generative techniques such as tiling and symmetry operations, Thom's cusp catastrophe, and mechanisms inspired by complexity science notions such as cellular automata, fractals, artificial life, and chaos. All of these techniques are encapulated in genetic representations. This paper is supplemented with examples from the authors art work, and comments on the philosophy behind this method of working, and its relation towards the reinvigoration of abstraction after post-modernism.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	2004_024
id	2004_024
authors	Holmgren, S., Rüdiger, B., Storgaard, K. and Tournay, B.
year	2004
title	The Electronic Neighbourhood - A New Urban Space
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 24-34
doi	https://doi.org/10.52842/conf.ecaade.2004.024
summary	During the event Cultural Market Days on 23 and 24 August 2003 at Noerrebro Park in Copenhagen, visitors could also enter the marketplace from their home via the Internet, as a digital 3D model had been constructed that showed the marketplace with all its information booths and activities. This virtual marketplace functioned as an extension of the urban space, allowing you to take part in the flow of information, activities and experiences that were offered in the marketplace. And this just by a click on the Internet address: http://www.e-kvarter.dk. Furthermore at certain times of the day you could chat with people from some of the many working groups of the urban regeneration project in Noerrebro. The digital 3D model is similar to the marketplace, but it creates its own universe in the green surroundings of Noerrebro Park. And now, when the Cultural Market Days are finished and the booths and people have gone, the Electronic Marketplace still remains on the Internet, with a potential for developing a new public space for information, dialogue and cooperation between the actors of the urban regeneration project. This paper presents the results of a 3-year research project, The Electronic Neighbourhood (2000-2004). Researchers have developed and tested a digital model of the urban area and other digital tools for supporting the dialogue and cooperation between professionals and citizens in an urban regeneration project in Copenhagen. The Danish Agency for Enterprise and Housing, the Ministry for Refugees, Immigration and Integration and Copenhagen Municipality have financed the research, which is planned to be published 2004. The results can also be followed on the Internet www.e-kvarter.dk.
keywords	3D Modelling; Virtual Environments; Design Process; Human-Computer Interaction; Collaborative Design; Urban Planning
series	eCAADe
last changed	2022/06/07 07:50

_id	63b9
authors	Jabi, Wassim
year	2000
title	Visualizing and Investigating Architectural Space Using Spherical Panoramic Imaging
source	Emerging Technologies and Design: The Intersection of Design and Technology, Proceedings of the 2000 ACSA Technology Conference, Massachusetts Institute of Technology, Cambridge, Massachusetts, July 14-17, 2000
summary	This paper reports on the use of immersive spherical imaging techniques to document, visualize and investigate architectural space. This technology can be used in the classrooms and design studios to augment traditional instructional and design investigation tools. As opposed to cylindrical imaging found in the popular QuickTime VR format, spherical imaging provides a 360-degree view in all directions – horizontally and vertically. The ability to capture and display a full sphere can be crucial for many interior architectural spaces. Spherical panoramas can originate from real, synthetic or hybrid source images. In addition to the ability to embed links to web pages or other panoramas, a unique feature of this technology allows the viewer to navigate through a scene as well as pause at any point and view the space in all directions. In addition, the technology allows the user to sketch over the scene in an intelligent manner such that the sketched artifacts rotate correctly when the target view shifts. The software also integrates with collaborative tools to allow synchronous viewing of shared panoramas over the Internet. These features allow for a truly immersive and interactive experience of the space that can be quite useful in a design studio setting. Finally, this paper describes ongoing efforts to integrate this technology with an interactive web-based, databasedriven virtual slide tray system for the storage, sorting, and display of multimedia content.
keywords	Spherical Panoramic Imaging
series	other
email
last changed	2002/03/05 19:55

_id	3760
authors	Koutamanis, Alexander
year	2000
title	Recognition and Indexing of Architectural Features in Floor Plans on the Internet
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 357-366
doi	https://doi.org/10.52842/conf.caadria.2000.357
summary	The Internet promises a worldwide information system, capable of uniting different sources and types of original, up-to-date and directly usable information. Among the main components of this system are retrieval mechanisms characterized by high precision and recall, as well as by supportive relevance feedback. The textual versions of these retrieval mechanisms have been available for some time and have achieved a certain degree of efficiency and sophistication. Image retrieval lags behind, despite the recent advances in content-based retrieval. In architecture this is largely due to the lack of integration of domain knowledge and known formalisms. Indexing and retrieval of architectural floor plans can rely on existing generative systems such as shape grammars and rectangular arrangements. By reversing generative systems in purpose we derive compact descriptions that describe completely a floor plan and make explicit all relevant features rather than a small number of features. The main limitation of reversed generative systems is that they apply to specific classes of designs. Unification in indexing and retrieval can only take place at the level of basic primitives, i.e. spaces and building elements. In both vector and pixel images of architectural floor plans this can be achieved by a universal recognition system that identifies salient local features to produce a basic spatial representation.
series	CAADRIA
email
last changed	2022/06/07 07:51

For more results click below: