Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 697

Reformat results as: short short into frame detailed detailed into frame

_id	e345
authors	Marx, John
year	2000
title	A proposal for alternative methods for teaching digital design
source	Automation in Construction 9 (1) (2000) pp. 19-35
summary	Computers have the potential to radically change the process of architectural design, and match more closely the formal aspirations of contemporary designers. What, then, should be the direction educators take in response to the opportunities created by the use of computers in the design process? There are, perhaps, two obvious methods of teaching Digital Design at a university level; a course adjunct to a design studio, or a course offered independently of a design studio.The computer is a facilitator of design ideas, but by itself, is not a creator of content. The primary responsibility of the design studio is the creation of content. It is the implementation of theory and critical analysis which should be the core concern of studio instruction. Given the limited time students are exposed to design studio it would seem appropriate, then, that the digital tools, which facilitate the design process, be taught separately, so as not to dilute the design studios importance. Likewise, this separation should allow the student to concentrate attention on Digital Design as a comprehensive process, beginning with initial massing studies and ending with high resolution presentation drawings. The burden of learning this new process is difficult as well as time consuming. Students are generally struggling to learn how to design, much less to design on the computer. In addition, the current lack of digital skills on the part of design faculty makes it difficult to create a level of consistency in teaching digital design. Compounding these problems is the cost to architectural departments of providing hardware and software resources sufficient to have a computer on every studio desk.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	735b
authors	Tolone, W.J.
year	2000
title	Virtual situation rooms: connecting people across enterprises for supply-chain agility
source	Computer-Aided Design, Vol. 32 (2) (2000) pp. 109-117
summary	Agility and time-based manufacturing are critical success factors for today's manufacturing enterprise. To be competitive, enterprises must integrate their supply chains moreeffectively and forge close memberships with customers and suppliers more quickly. Consequently, technologies must be developed that enable enterprises to respond toconsumer demand more quickly, integrate with suppliers more effectively, adapt to market variations more efficiently and evolve product designs with manufacturing practicesmore seamlessly. The mission of the Extended-Enterprise Coalition for Integrated Collaborative Manufacturing Systems coalition is to research, develop, and demonstratetechnologies to enable the integration of manufacturing applications in a multi-company supply chain planning and execution environment. We believe real-time andasynchronous collaboration technology will play a critical role in allowing manufacturers to increase their supply chain agility. We are realizing our efforts through our VirtualSituation Room (VSR) technology. The primary goal of the VSR technology is to enhance current ad-hoc, limited methods and mechanisms for spontaneous, real-timecommunication using feature-rich, industry standards-based building blocks and network protocols. VSR technology is being designed to find and engage quickly all relevantmembers of a problem solving team supported by highly interactive, conversational access to information and control and enabled by business processes, security policies andtechnologies, intelligence, and integration tools.
keywords	Collaborative Systems, Supply Chain Integration, Real-Time Conferencing
series	journal paper
email
last changed	2003/05/15 21:33

_id	ga0021
id	ga0021
authors	Eacott, John
year	2000
title	Generative music composition in practice - a critical evaluation
source	International Conference on Generative Art
summary	This critical evaluation will discuss 4 computer based musical works which, for reasons I shall explain, I describe as non-linear or generative. The works have been constructed by me and publicly performed or exhibited during a two year period from October 1998 to October 2000. ‘In the beginning…’ interactive music installation, strangeAttraction, Morley Gallery, London. July 1999 ‘jnrtv’ live generative dance music May 1999 to Dec 2000 ‘jazz’ interactive music installation, another strangeAttraction Morley Gallery, London. July 2000-09-26 ‘the street’ architectural interactive music installation, University of Westminster Oct 2000 Introduction I have always loved the practice of composing, particularly when it means scoring a work to be played by a live ensemble. There is something about taking a fresh sheet of manuscript , ruling the bar lines, adding clefs, key and time signatures and beginning the gradual process of adding notes, one at a time to the score until it is complete that is gratifying and compensates for the enormous effort involved. The process of scoring however is actually one distinct act within the more general task of creating music. Recently, the notion of ‘composing’ has met challenges through an increased interest in non-linear compositional methods. It is actually the presence of Chaotic or uncontrolable elements which add real beauty to music and many if not all of the things we value. If we think of a sunset, waves lapping on the shore, plants, trees a human face and the sound of the human voice, these things are not perfect and more importantly perhaps, they are transient, constantly changing and evolving. Last year and again this year, I have organised an exhibition of interactive , non-linear music installations called 'strangeAttraction'. The title refers to what Edward Lorenz called a ‘strange attractor’ the phenomenon that despite vast degrees of Chaos and uncertainty within a system, there is a degree of predictability, the tendency for chaotic behaviour to ‘attract’ towards a probable set of outcomes. Composition that deals with 'attractors' or probable outcomes rather than specific details which are set in stone is an increasingly intriguing notion.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	f44f
authors	Huang, Ying-Hsiu
year	2000
title	Investigating the Cognitive Behavior of Generating Idea Sketches. Neural Network Simulation
doi	https://doi.org/10.52842/conf.caadria.2000.287
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 287-296
summary	In idea sketches, there are a number of ambiguous shapes. Designers will associate and transform some shapes into others (Liu, 1993). Then, they evaluate these shapes in terms of functions and design requirements; furthermore, they would have generated other shapes that certified the design requirements (Huang, 1999). However, not only is the idea of design composed of one element, but also consisted of varied components. The purpose of this paper is to investigate how designers generate ideas of multi-component products, and to simulate this phenomenon by neural networks. At the same time, this paper attempts to study the design cognitive behavior of idea-generating stages, and explores the designers' cognitive phenomenon. Therefore, there are two stages in this paper: First, I conduct a cognitive experiment to realize how designers generate the multi-component product and acquire the sketches that designers generated. Second, I train the neural networks to simulate the behavior of idea generation and explore the cognitive phenomenon in design sketches. As a result, networks associate one shape that trained before, and then generate a complete idea. This phenomenon is similar to the cognitive behavior of designers who saw the ambiguous shape as one shape, which was retrieved from LTM. Moreover, the neural network is examined by a rectangle, which is totally different from the training patterns. The network will associate a confused shape. But the network will associate different shapes by adjusting some critical parameters. Designers can generate variable shapes from one shape, but the signal neural network can't simulate this kind of behavior. On the contrary, this paper proposes five sequential networks to generate variable shapes from the same shape and simulates how designers develop ideas.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	61af
authors	Castello, Iára Regina
year	2000
title	A Coletivização do Patrimônio Percebido (The Collectivization of the Experienced Heritage)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 179-181
summary	This work highlights the application of GIS in the registration of resources identified as the environmental heritage of urban areas. To begin with, a brief description of the data collection method, based on local communities’ perception, is provided. It is maintained that the consideration of social values attributed by the population results in a more legitimate spatial knowledge, allowing for the identification of the more relevant elements, according to local inhabitants' statements. Finally, an emphasis is given to data processing techniques, asserting that the use of computer aided tools can ease the diffusion of knowledge about the society’s environmental heritage. This, in turn, may activate the recollection - and the preservation - of the cultural memory and, eventually, the formulation of strategies for recovering built heritage. It also opens the way to expand upon political conscience and social participation, enlarging the concept of citizenship.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ga0015
id	ga0015
authors	Daru, R., Vreedenburgh, E. and Scha, R.
year	2000
title	Architectural Innovation as an evolutionary process
source	International Conference on Generative Art
summary	Traditionally in art and architectural history, innovation is treated as a history of ideas of individuals (pioneers), movements and schools. The monograph is in that context one of the most used forms of scientific exercise. History of architecture is then mostly seen as a succession of dominant architectural paradigms imposed by great architectural creators fighting at the beginning against mainstream establishment until they themselves come to be recognised. However, there have been attempts to place architectural innovation and creativity in an evolutionary perspective. Charles Jencks for example, has described the evolution of architectural and art movements according to a diagram inspired by ecological models. Philip Steadman, in his book "The Evolution of Designs. Biological analogy in architecture and the applied arts" (1979), sketches the history of various biological analogies and their impact on architectural theory: the organic, classificatory, anatomical, ecological and Darwinian or evolutionary analogies. This last analogy "explains the design of useful objects and buildings, particularly in primitive society and in the craft tradition, in terms of a sequence of repeated copyings (corresponding to inheritance), with small changes made at each stage ('variations'), which are then subjected to a testing process when the object is put into use ('selection')." However, Steadman has confined his study to a literature survey as the basis of a history of ideas. Since this pioneering work, new developments like Dawkins' concept of memes allow further steps in the field of cultural evolution of architectural innovation. The application of the concept of memes to architectural design has been put forward in a preceding "Generative Art" conference (Daru, 1999), showing its application in a pilot study on the analysis of projects of and by architectural students. This first empirical study is now followed by a study of 'real life' architectural practice. The case taken has a double implication for the evolutionary analogy. It takes a specific architectural innovative concept as a 'meme' and develops the analysis of the trajectory of this meme in the individual context of the designer and at large. At the same time, the architect involved (Eric Vreedenburgh, Archipel Ontwerpers) is knowledgeable about the theory of memetic evolution and is applying a computer tool (called 'Artificial') together with Remko Scha, the authoring computer scientist of the program who collaborates frequently with artists and architects. This case study (the penthouse in Dutch town planning and the application of 'Artificial') shall be discussed in the paper as presented. The theoretical and methodological problems of various models of diffusion of memes shall be discussed and a preliminary model shall be presented as a framework to account for not only Darwinian but also Lamarckian processes, and for individual as well as collective transmission, consumption and creative transformation of memes.
keywords	evolutionary design, architectural innovation, memetic diffusion, CAAD, penthouses, Dutch design, creativity, Darwinian and Lamarckian processes
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	684a
authors	Bucchard, Bill and Bucchard, Alli
year	2000
title	Inside AutoCAD 2000
source	New Riders, Indianapolis
summary	Companies with multiple seats of AutoCAD have issues that are unique to only them when they are getting ready to upgrade their software. They run into advanced customization issues, networking and file sharing problems brought on by the upgrade, and other problems associated with a new software purchase. Inside AutoCAD 2000, Limited Edition focuses on these special needs while also providing complete, hands-on coverage of AutoCAD 2000. This Limited Edition includes the entire contents from Inside AutoCAD 2000 as well as seven entirely new chapters, and is 25% larger. These additional chapters cover: Visual LISP; Advanced Customization (toolbars, menus, etc.); VBA; Migration Assistant; DIESEL; Installing 2000 in the Business Environment (setting up AutoCAD over a network), and Advanced Plotting. Inside AutoCAD 2000, Limited Edition takes the hands-on approach to getting the most out of AutoCAD's features. Chapters progress from the most common tasks and functions to the most advanced and customizable. You learn by doing, and everything you learn can be extrapolated to your own unique AutoCAD needs.
series	other
last changed	2003/04/23 15:14

_id	b759
authors	Chen, Shu-Ling
year	2000
title	How Verbalization Influences Design Cognition? A Methodological Study
doi	https://doi.org/10.52842/conf.caadria.2000.317
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 317-329
summary	The concurrent verbalization would affect not only the normal design behaviors but also the perceptual interactions between designers and their own sketches, while limited by short-term memory, video/audio retrospective protocols may probably induce some selective of memory trace and ambiguous verbal data, resulting in a lower accuracy of reports. This research focuses on examining the validity of video/audio retrospective and think aloud protocols, based on the qualitative comparison of the two methodologies. And we also want to understand the difference of the ability of collecting perceptual information between these two protocols. Moreover the segment and coding scheme for the drawings are primitively developed.
series	CAADRIA
last changed	2022/06/07 07:55

_id	d0aa
authors	Colajanni, Benedetto, Concialdi, Salvatore and Pellitteri, Giuseppe
year	1999
title	CoCoMa: a Collaborative Constraint Management System for the Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.1999.364
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 364-369
summary	Collaborative Design is a topic of particular current interest. Existing software allows a multiplicity of designers to work on the same project. What the software really allows is accessing to a part of the information of the project and changing it. Sometimes there is a hierarchical distribution of the power of change: some participants can be permitted to operate only on some limited layers of the object representation. In this case the changes they propose are to be accepted by a general manager of the design process. What is lacking in this kind of software is the explicit management on the reciprocal constraints posed by different participants. In this paper, an elementary Collaborative Design System is presented whose main concern is just the management of constraints. Each participant designs the part of the project of his/her concern instantiating objects comprised of geometric description, alphanumeric variables and constraints on both. Constraints can be of two types: absolute or defined by a range of allowed values of the constrained variable. A participant intervening later can accept the constraint, choosing a value in the permitted range, or decide to violate it. In this case the proposed violation is signalled to whom posed it.
keywords	Collaborative Design, Design Process, Management System, Participant Designs, Constraints Violation
series	eCAADe
email
last changed	2022/06/07 07:56

_id	958e
authors	Coppola, Carlo and Ceso, Alessandro
year	2000
title	Computer Aided Design and Artificial Intelligence in Urban and Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2000.301
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 301-307
summary	In general, computer-aided design is still limited to a rather elementary use of the medium, as it is mainly used for the representation/simulation of a design idea w an electronic drawing-table. hich is not computer-generated. The procedures used to date have been basically been those of an electronic drawing-table. At the first stage of development the objective was to find a different and better means of communication, to give form to an idea so as to show its quality. The procedures used were 2D design and 3D simulation models, usually used when the design was already defined. The second stage is when solid 3D modelling is used to define the formal design at the conception stage, using virtual models instead of study models in wood, plastic, etc. At the same time in other connected fields the objective is to evaluate the feasibility of the formal idea by means of structural and technological analysis. The third stage, in my opinion, should aim to develop procedures capable of contributing to both the generation of the formal idea and the simultaneous study of technical feasibility by means of a decision-making support system aided by an Artificial Intelligence procedure which will lead to what I would describe as the definition of the design in its totality. The approach to architectural and urban design has been strongly influenced by the first two stages, though these have developed independently and with very specific objectives. It is my belief that architectural design is now increasingly the result of a structured and complex process, not a simple act of pure artistic invention. Consequently, I feel that the way forward is a procedure able to virtually represent all the features of the object designed, not only in its definitive configuration but also and more importantly in the interactions which determine the design process as it develops. Thus A.I. becomes the means of synthesis for models which are hierarchically subordinated which together determine the design object in its developmental process, supporting decision-making by applying processing criteria which generative modelling has already identified. This trend is currently being experimented, giving rise to interesting results from process design in the field of industrial production.
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:56

_id	gerardgabriel_phd
id	gerardgabriel_phd
authors	Gabriel, Gerard Caesar
year	2000
title	COMPUTER-MEDIATED COMMUNICATION IN DESIGN
source	PhD Thesis, Faculty of Architecture, University of Sydney
summary	Up till now, architects collaborating with other colleagues did so mostly face-to-face (FTF). They had to be in the same space (co-located) at the same time. Communication was ‘spontaneous’ and ideas were represented, whether verbal or nonverbal, by talking and using ‘traditional drawing tools’. If they were geographically displaced, the interaction was then space affected as well as the probability of being time affected. In this case communication was usually mediated through the telephone, and graphically represented ideas were sent by Fax or posted documents. Recently, some architectural firms started using modems and Internet connections to exchange information, by transferring CAD drawings as well as design information, through e-mail and file transfer protocol (FTP). Discussing ideas in architecture, as a more abstract notion, is different from discussing other more concrete arguments using video conferencing. It is more important to ‘see’ what is being discussed at hand than ‘watch’ the other person(s) involved in the discussion. In other words the data being conveyed might be of more importance than the mode of communication. Taking into consideration recent developments in computer and communication technologies this thesis investigates different communication channels utilised in architectural collaboration through Computer Mediated Collaborative Design (CMCD) sessions as opposed to FTF sessions. This thesis investigates the possible effects these different channels have on collaborative design in general and collaborative design communication in particular. We argue that successful CMCD does not necessarily mean emulating close proximity environments. Excluding certain communication channels in a CMCD environment might affect the flow and quantity of synchronous collaborative communication, but not necessarily the quality and content of mutually communicated and represented design ideas. Therefore different communication channels might affect the type of communication and not necessarily the content of the communication. We propose that audio and video are not essential communication channels in CMCD environments. We posit that architects will collaborate and communicate design representations effectively although with some differences, since those two channels might cause interruptions and successful collaborative sessions can take place without them. For this purpose we conducted twenty-four one-hour experiments involving final year architecture students all working to the same design brief. The experiments were divided into three categories, FTF, full computer mediated collaborative design sessions (CMCD-a; audio-video conferencing plus whiteboard as a shared drawing space) and limited computer mediated collaborative design sessions (CMCD-b; with Lambda MOO used as a chat medium plus whiteboard as a shared drawing space). The experiments were video and audio taped, transcribed and coded into a custom developed coding scheme. The results of the analysed coded data and observations of the videotapes provided evidence that there were noticeable differences between the three categories. There was more design communication and less communication control in the CMCD-b category compared to the FTF and CMCD-a categories. Verbal communication became shorter and straight to the point in CMCD-b as opposed to spontaneous non-stop chat in the other two categories. Moreover in CMCD-b the subjects were observed to be more reflective as well as choosing and re-examining their words to explain ideas to their partners. At times they were seen scrolling back through the text of the conversation in order to re-analyse or interpret the design ideas at hand. This was impossible in FTF and CMCD-a sessions, since the subjects were more spontaneous and audio representations were lost as soon as they were uttered. Also the video channel in the CMCD-a category was ignored and hardly used except for the first few minutes of the experiments, for a brief exchange of light humour on the appearance of each subject. The results obtained from analysing the experiments helped us conclude that different communication channels produce different collaborative environments. The three categories of communication for architectural collaboration explored in our experiments are indicative of the alternatives available to architects now. What is not clear to architects is why they would choose one category over another. We propose that each category has its own strengths and difficulties for architectural collaboration, and therefore should be selected on the basis of the type of communication considered to be most effective for the stage and tasks of the design project.
series	thesis:PhD
type	normal paper
email
last changed	2005/09/09 13:02

_id	3940
authors	Hall, Rick
year	1999
title	Realtime 3D visual Analysis of Very Large Models at Low Cost
doi	https://doi.org/10.52842/conf.ecaade.1999.437
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 437-441
summary	Computer based visualisation of 3D models in architecture has been possible for 20 years or more, and the software technology has steadily improved during this time so that now incredibly realistic images can be generated from any viewpoint in a model, and impressive fly through sequences can bring a model to life in ways previously not possible. Virtual reality is with us and multi-media enables us to present a finished design in increasingly seductive ways. However, these forms of output from a 3D model offer much more limited benefits during the design process and particularly on large complex models because they are so computing intensive and it often require many hours to produce just one image. Anything other than a small and relatively simple model cannot be viewed dynamically in real-time on a desktop PC of the type commonly used by architects in a design office. Until now the solution to this problem has meant investing in expensive design review hardware and software with its inherent need for trained, skilled labour. As a result, design review products are often viewed as a luxury or costly necessity.
keywords	Visual Analysis, Low Cost, 3D Modelling
series	eCAADe
last changed	2022/06/07 07:50

_id	c6db
authors	Heylighen, Ann
year	2000
title	In Case of Architectural Design. Critique and Praise of Case-Based Design in Architecture
source	Dissertation - Doct. Toegepaste wetenschappen, KU Leuven, Fac. Toegepaste wetenschappen, Dep. architectuur, stedebouw en ruimtelijke ordening (ISBN 90-5682-248-9)
summary	Architects are said to learn design by experience. Learning design by experience is the essence of Case-Based Design (CBD), a sub-domain of Artificial Intelligence. Part I critically explores the CBD approach from an architectural point of view, tracing its origins in the Theory of Dynamic Memory and highlighting its potential for architectural design. Seven CBD systems are analysed, experienced architects and design teachers are interviewed, and an experiment is carried out to examine how cases affect the design performance of architecture students. The results of this exploration show that despite its sound view on how architects acquire (design) knowledge, CBD is limited in important respects: it reduces architectural design to problem solving, is difficult to implement and has to contend with prejudices among the target group. With a view to stretching these limits, part II covers the design, implementation and evaluation of DYNAMO (Dynamic Architectural Memory On-line). This Web-based design tool tailors the CBD approach to the complexity of architectural design by effecting three transformations: extending the concern with design products towards design processes, turning static case bases into dynamic memories and upgrading users from passive case consumers to active case-based designers.
keywords	Architectural Design; Case-Based Design
series	thesis:PhD
email
last changed	2002/12/14 19:29

_id	dba1
authors	Hirschberg, Urs and Wenz, Florian
year	2000
title	Phase(x) - memetic engineering for architecture
source	Automation in Construction 9 (4) (2000) pp. 387-392
summary	Phase(x) was a successful teaching experiment we made in our entry level CAAD course in the Wintersemester 1996/1997. The course was entirely organized by means of a central database that managed all the students' works through different learning phases. This set-up allowed that the results of one phase and one author be taken as the starting point for the work in the next phase by a different author. As students could choose which model they wanted to work with, the whole of Phase(x) could be viewed as an organism where, as in a genetic system, only the "fittest" works survived. While some discussion of the technical set-up is necessary as a background, the main topics addressed in this paper will be the structuring in phases of the course, the experiences we had with collective authorship, and the observations we made about the memes2 that developed and spread in the students' works. Finally we'll draw some conclusions in how far Phase(x) is relevant also in a larger context, which is not limited to teaching CAAD. Since this paper was first published in 1997, we have continued to explore the issues described here in various projects3 together with a growing number of other interested institutions worldwide. While leaving the paper essentially in its original form, we added a section at the end, in which we outline some of these recent developments.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddssar0014
id	ddssar0014
authors	Janssen, P., Frazer, J. and Ming-xi, T.
year	2000
title	Evolutionary design systems: a conceptual framework for the creation of generative processes
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	This paper presents an conceptual framework for the construction of generative mapping processes as a basis for creating active design tools in the domain of architecture. Such generative processes are seen as key components within evolutionary systems that manipulate populations of alternative solutions in order to discover previously unexplored possibilities. Solutions are represented in two forms: as highly encoded genotypes referred to as design seeds and as decoded phenotypes referred to as design proposals. The generative process maps the design seed to the design proposal. The discussion of generative processes is in two parts. In the first part it is argued that any generative process that aims to create a wide range of solutions that differ from each other in fundamental ways must focus on a limited subcategory of possible designs. It is proposed that the endeavour to create active design tools demands that the focus be on the designer's highly personalised style, called a design-schema. The second part discusses how to uncover the essence of an architectural design-schema. In particular, it is argued that implicit and familiar aspects of buildings must be scrutinised in order to reveal the knowledge that is essential to capturing and codifying a design-schema. A range of rationalisations and conceptualisations of built form are presented with examples to illustrate possible routes of analysis. Finally, in conclusion, the possibility of discovering universal generators common to many divers generative processes are discussed.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0023
id	ddssar0023
authors	Jens Pohl, Art Chapman, and Kym Jason Pohl
year	2000
title	Computer-aided design systems for the 21st century: some design guidelines
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	This paper proposes nine design principles for a new generation of computer-aided design (CAD) systems that actively support the decision making and problem solving activities of environmental design. Foremost among these are: a meaningful internal object-based representation of the artifact being designed within its environmental context; a collaborative problem solving paradigm in which the human designer and the computer form a complementary partnership; and, the notion of decision-support tools rather than predefined solutions. Two prototype computer-aided design systems implemented by the CAD Research Center that embody most of these concepts are described. ICADS (Intelligent Computer-Aided Design System) incorporates multiple expert agents in domains such as natural and artificial lighting, noise control, structural system selection, climatic determinants, and energy conservation. Given a particular building design context, the agents in ICADS draw upon their own expertise and several knowledgebases as they monitor the actions of the human designer and collaborate opportunistically. KOALA (Knowledge-Based Object-Agent Collaboration) builds on the multi-agent concepts embodied in ICADS by the addition of two kinds of agents. Mentor agents represent the interests of selected objects within the ontology of the design environment. In the implemented KOALA system building spaces are represented by agents capable of collaborating with each other, with domain agents for the provision of expert services, and with the human designer. Facilitator agents listen in on the communications among mentor agents to detect conflicts and moderate arguments. While both of these prototype systems are limited in scope by focussing on the earliest design stages and restricted in their understanding of the inherent complexity of a design state, they nevertheless promise a paradigm shift in computer-aided design.
series	DDSS
last changed	2003/08/07 16:36

_id	146a
authors	Johnson, Robert E.
year	2000
title	The Impact of E-Commerce on the Design and Construction Industry
doi	https://doi.org/10.52842/conf.acadia.2000.075
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 75-83
summary	Historically, the design and construction industry has been slow to innovate. As a result, productivity in the construction industry has declined substantially compared to other industries. Inefficiencies in this industry are well documented. However, the potential for cost savings and increased efficiency through the use of the Internet and e-commerce may not only increase the efficiency of the design and construction industry, but it may also significantly change the structure and composition of the industry. This is suggested because effective implementations of e-commerce technologies are not limited to one aspect of one industry. E-commerce may be most effective when it is thought of and applied to multi-industry enterprises and in a global context. This paper continues the exploration of a concept that we have been working on for several years, namely that “…information technology is evolving from a tool that incrementally improves ‘backoffice’ productivity to an essential component of strategic positioning that may alter the basic economics, organizational structure and operational practices of facility management organizations and their interactions with service providers (architects, engineers and constructors).” (Johnson and Clayton 1998) This paper will utilize the case study methodology to explore these issues as they are affecting the AEC/FM industry.
series	ACADIA
last changed	2022/06/07 07:52

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	0960
authors	Kamat, Vineet Rajendra
year	2000
title	Enabling 3D Visualization of Simulated Construction Operations
source	Virginia Polytechnic Institute and State University
summary	Simulation modeling and visualization can substantially help in designing complex construction operations and in making optimal decisions where traditional methods prove ineffective or are unfeasible. However, there has been limited use of simulation in planning construction operations due to the unavailability of appropriate visual communication tools that can provide users with a more realistic and comprehensible feedback from simulation analyses. Visualizing simulated construction operations in 3D can significantly help in establishing the credibility of simulation models. In addition, 3D visualization can provide valuable insight into the subtleties of construction operations that are otherwise non-quantifiable and presentable. New software development technologies emerge at incredible rates that allow engineers and scientists to create novel, domain-specific applications. This study capitalized on a computer graphics technology based on the concept of the Scene Graph to design and implement a general-purpose 3D Visualization System that is Simulation and CAD-software independent. This system, the Dynamic Construction Visualizer, enables realistic visualization of modeled construction operations and the resulting products in 3D and can be used in conjunction with a wide variety of simulation tools. This thesis describes the Dynamic Construction Visualizer as well as the Scene Graph architecture and the Frame Updating algorithms used in its design.
keywords	Scene Graphs; 3D Visualization; Animation; Simulation; Construction Operations; Computer Graphics
series	thesis:MSc
email
more	http://scholar.lib.vt.edu/theses/available/etd-10232000-19390056/
last changed	2004/06/02 19:12

_id	30c8
authors	Koutamanis, A., Barendse, P.B74 and Kempenaar, J.W.
year	1999
title	Web-based CAAD Instruction: The Delft Experience
doi	https://doi.org/10.52842/conf.ecaade.1999.159
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 159-168
summary	In the early 1990s, the introduction of an extensive CAAD component in the compulsory curriculum of the Faculty of Architecture, Delft University of Technology, stimulated experimentation with computer-based instruction systems. The emergence of the World Wide Web presented new possibilities. Nevertheless, the reasons for investing in Web-based CAAD instruction were mostly pragmatic, i.e. a reaction to necessity, rather than an intention to explore, experiment and revolutionize. One of the problems addressed in our Web-based CAAD instruction is CAAD literacy. Help files and manuals that accompany software have proven to be unsuitable for introductory courses in design computing. This led to the development of a series of dynamic Web-based tutorials, in the form of interactive slide shows. The implementation of the tutorials is based on a cooperative framework that allows teachers and students to contribute at different levels of technical and methodical complexity. The use of the Web in CAAD education also stimulated a more active attitude among students. Despite the limited support and incentives offered by the Faculty, the Web-based CAAD courses became an invitation to intelligent and meaningful use of Web technologies by students for design presentation and communication. This is not only a useful addition to the opportunities offered by CAAD systems but also a prerequisite to new design communities.
keywords	WWW Technologies, Teaching
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: