Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 749

Reformat results as: short short into frame detailed detailed into frame

_id	ddssar0014
id	ddssar0014
authors	Janssen, P., Frazer, J. and Ming-xi, T.
year	2000
title	Evolutionary design systems: a conceptual framework for the creation of generative processes
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	This paper presents an conceptual framework for the construction of generative mapping processes as a basis for creating active design tools in the domain of architecture. Such generative processes are seen as key components within evolutionary systems that manipulate populations of alternative solutions in order to discover previously unexplored possibilities. Solutions are represented in two forms: as highly encoded genotypes referred to as design seeds and as decoded phenotypes referred to as design proposals. The generative process maps the design seed to the design proposal. The discussion of generative processes is in two parts. In the first part it is argued that any generative process that aims to create a wide range of solutions that differ from each other in fundamental ways must focus on a limited subcategory of possible designs. It is proposed that the endeavour to create active design tools demands that the focus be on the designer's highly personalised style, called a design-schema. The second part discusses how to uncover the essence of an architectural design-schema. In particular, it is argued that implicit and familiar aspects of buildings must be scrutinised in order to reveal the knowledge that is essential to capturing and codifying a design-schema. A range of rationalisations and conceptualisations of built form are presented with examples to illustrate possible routes of analysis. Finally, in conclusion, the possibility of discovering universal generators common to many divers generative processes are discussed.
series	DDSS
last changed	2003/08/07 16:36

_id	27e1
authors	Janssen, P., Frazer, J. and Tang, M.X.
year	2000
title	Evolutionary design systems: a conceptual framework for the creation of generative processes
source	Proceedings of the 5th International Conference on Design Decision Support Systems in Architecture and Urban Planning, Nijkerk, The Netherlands, pp. 190-200
summary	Design tools that aim not only to analyse and evaluate, but also to generate and explore alternative design proposals are now under development. An evolutionary paradigm is presented as a basis for creating such tools. First, the evolutionary paradigm is shown to be the only successful design system on which this new phase of design tool could be based. Secondly, any characterisation of design as a search problem is argued to be a serious misconception. Instead it is proposed that evolutionary design systems should be seen as generative processes that are able to evaluate their own output. Thirdly, a generic framework for generative evolutionary design systems is presented. Fourth, the generative process is introduced as key element within this generic framework. The role of the environment within this process is fundamental. Finally, the direction of future research within the evolutionary design paradigm is discussed with possible short and long term goals being presented.
series	other
last changed	2003/04/23 15:14

_id	ga0015
id	ga0015
authors	Daru, R., Vreedenburgh, E. and Scha, R.
year	2000
title	Architectural Innovation as an evolutionary process
source	International Conference on Generative Art
summary	Traditionally in art and architectural history, innovation is treated as a history of ideas of individuals (pioneers), movements and schools. The monograph is in that context one of the most used forms of scientific exercise. History of architecture is then mostly seen as a succession of dominant architectural paradigms imposed by great architectural creators fighting at the beginning against mainstream establishment until they themselves come to be recognised. However, there have been attempts to place architectural innovation and creativity in an evolutionary perspective. Charles Jencks for example, has described the evolution of architectural and art movements according to a diagram inspired by ecological models. Philip Steadman, in his book "The Evolution of Designs. Biological analogy in architecture and the applied arts" (1979), sketches the history of various biological analogies and their impact on architectural theory: the organic, classificatory, anatomical, ecological and Darwinian or evolutionary analogies. This last analogy "explains the design of useful objects and buildings, particularly in primitive society and in the craft tradition, in terms of a sequence of repeated copyings (corresponding to inheritance), with small changes made at each stage ('variations'), which are then subjected to a testing process when the object is put into use ('selection')." However, Steadman has confined his study to a literature survey as the basis of a history of ideas. Since this pioneering work, new developments like Dawkins' concept of memes allow further steps in the field of cultural evolution of architectural innovation. The application of the concept of memes to architectural design has been put forward in a preceding "Generative Art" conference (Daru, 1999), showing its application in a pilot study on the analysis of projects of and by architectural students. This first empirical study is now followed by a study of 'real life' architectural practice. The case taken has a double implication for the evolutionary analogy. It takes a specific architectural innovative concept as a 'meme' and develops the analysis of the trajectory of this meme in the individual context of the designer and at large. At the same time, the architect involved (Eric Vreedenburgh, Archipel Ontwerpers) is knowledgeable about the theory of memetic evolution and is applying a computer tool (called 'Artificial') together with Remko Scha, the authoring computer scientist of the program who collaborates frequently with artists and architects. This case study (the penthouse in Dutch town planning and the application of 'Artificial') shall be discussed in the paper as presented. The theoretical and methodological problems of various models of diffusion of memes shall be discussed and a preliminary model shall be presented as a framework to account for not only Darwinian but also Lamarckian processes, and for individual as well as collective transmission, consumption and creative transformation of memes.
keywords	evolutionary design, architectural innovation, memetic diffusion, CAAD, penthouses, Dutch design, creativity, Darwinian and Lamarckian processes
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ga0009
id	ga0009
authors	Lewis, Matthew
year	2000
title	Aesthetic Evolutionary Design with Data Flow Networks
source	International Conference on Generative Art
summary	For a little over a decade, software has been created which allows for the design of visual content by aesthetic evolutionary design (AED) [3]. The great majority of these AED systems involve custom software intended for breeding entities within one fairly narrow problem domain, e.g., certain classes of buildings, cars, images, etc. [5]. Only a very few generic AED systems have been attempted, and extending them to a new design problem domain can require a significant amount of custom software development [6][8]. High end computer graphics software packages have in recent years become sufficiently robust to allow for flexible specification and construction of high level procedural models. These packages also provide extensibility, allowing for the creation of new software tools. One component of these systems which enables rapid development of new generative models and tools is the visual data flow network [1][2][7]. One of the first CG packages to employ this paradigm was Houdini. A system constructed within Houdini which allows for very fast generic specification of evolvable parametric prototypes is described [4]. The real-time nature of the software, when combined with the interlocking data networks, allows not only for vertical ancestor/child populations within the design space to be explored, but also allows for fast "horizontal" exploration of the potential population surface. Several example problem domains will be presented and discussed. References: [1] Alias \| Wavefront. Maya. 2000, http://www.aliaswavefront.com [2] Avid. SOFTIMAGE. 2000, http://www.softimage.com [3] Bentley, Peter J. Evolutionary Design by Computers. Morgan Kaufmann, 1999. [4] Lewis, Matthew. "Metavolve Home Page". 2000, http://www.cgrg.ohio-state.edu/~mlewis/AED/Metavolve/ [5] Lewis, Matthew. "Visual Aesthetic Evolutionary Design Links". 2000, http://www.cgrg.ohio-state.edu/~mlewis/aed.html [6] Rowley, Timothy. "A Toolkit for Visual Genetic Programming". Technical Report GCG-74, The Geometry Center, University of Minnesota, 1994. [7] Side Effects Software. Houdini. 2000, http://www.sidefx.com [8] Todd, Stephen and William Latham. "The Mutation and Growth of Art by Computers" in Evolutionary Design by Computers, Peter Bentley ed., pp. 221-250, Chapter 9, Morgan Kaufmann, 1999.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ga0010
id	ga0010
authors	Moroni, A., Zuben, F. Von and Manzolli, J.
year	2000
title	ArTbitrariness in Music
source	International Conference on Generative Art
summary	Evolution is now considered not only powerful enough to bring about the biological entities as complex as humans and conciousness, but also useful in simulation to create algorithms and structures of higher levels of complexity than could easily be built by design. In the context of artistic domains, the process of human-machine interaction is analyzed as a good framework to explore creativity and to produce results that could not be obtained without this interaction. When evolutionary computation and other computational intelligence methodologies are involved, every attempt to improve aesthetic judgement we denote as ArTbitrariness, and is interpreted as an interactive iterative optimization process. ArTbitrariness is also suggested as an effective way to produce art through an efficient manipulation of information and a proper use of computational creativity to increase the complexity of the results without neglecting the aesthetic aspects [Moroni et al., 2000]. Our emphasis will be in an approach to interactive music composition. The problem of computer generation of musical material has received extensive attention and a subclass of the field of algorithmic composition includes those applications which use the computer as something in between an instrument, in which a user "plays" through the application's interface, and a compositional aid, which a user experiments with in order to generate stimulating and varying musical material. This approach was adopted in Vox Populi, a hybrid made up of an instrument and a compositional environment. Differently from other systems found in genetic algorithms or evolutionary computation, in which people have to listen to and judge the musical items, Vox Populi uses the computer and the mouse as real-time music controllers, acting as a new interactive computer-based musical instrument. The interface is designed to be flexible for the user to modify the music being generated. It explores evolutionary computation in the context of algorithmic composition and provides a graphical interface that allows to modify the tonal center and the voice range, changing the evolution of the music by using the mouse[Moroni et al., 1999]. A piece of music consists of several sets of musical material manipulated and exposed to the listener, for example pitches, harmonies, rhythms, timbres, etc. They are composed of a finite number of elements and basically, the aim of a composer is to organize those elements in an esthetic way. Modeling a piece as a dynamic system implies a view in which the composer draws trajectories or orbits using the elements of each set [Manzolli, 1991]. Nonlinear iterative mappings are associated with interface controls. In the next page two examples of nonlinear iterative mappings with their resulting musical pieces are shown.The mappings may give rise to attractors, defined as geometric figures that represent the set of stationary states of a non-linear dynamic system, or simply trajectories to which the system is attracted. The relevance of this approach goes beyond music applications per se. Computer music systems that are built on the basis of a solid theory can be coherently embedded into multimedia environments. The richness and specialty of the music domain are likely to initiate new thinking and ideas, which will have an impact on areas such as knowledge representation and planning, and on the design of visual formalisms and human-computer interfaces in general. Above and bellow, Vox Populi interface is depicted, showing two nonlinear iterative mappings with their resulting musical pieces. References [Manzolli, 1991] J. Manzolli. Harmonic Strange Attractors, CEM BULLETIN, Vol. 2, No. 2, 4 -- 7, 1991. [Moroni et al., 1999] Moroni, J. Manzolli, F. Von Zuben, R. Gudwin. Evolutionary Computation applied to Algorithmic Composition, Proceedings of CEC99 - IEEE International Conference on Evolutionary Computation, Washington D. C., p. 807 -- 811,1999. [Moroni et al., 2000] Moroni, A., Von Zuben, F. and Manzolli, J. ArTbitration, Las Vegas, USA: Proceedings of the 2000 Genetic and Evolutionary Computation Conference Workshop Program – GECCO, 143 -- 145, 2000.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ga0027
id	ga0027
authors	E. Bilotta, P. Pantano and V. Talarico
year	2000
title	Music Generation through Cellular Automata
source	International Conference on Generative Art
summary	Cellular automata (CA), like every other dynamical system, can be used to generate music. In fact, starting from any initial state and applying to them simple transition rules, such models are able to produce numerical sequences that can be successively associated to typically musical physical parameters. This approach is interesting because, maintaining fixed the set of rules and varying the initial data, many different, though correlated, numerical sequences can be originated (this recalls the genotype-phenotype dualism). Later on a musification (rendering) process can tie one or more physical parameters typical of music to various mathematical functions: as soon as the generative algorithm produces a numerical sequence this process modifies the physical parameter thus composing a sequence of sounds whose characteristic varies during the course of time. Many so obtained musical sequences can be selected by a genetic algorithm (CA) that promotes their evolution and refinement. The aim of this paper is to illustrate a series of musical pieces generated by CA. In the first part attention is focused on the effects coming from the application of various rendering processes to one dimensional multi state CA; typical behaviours of automata belonging to each of the four families discovered by Wolfram have been studied: CA evolving to a uniform state, CA evolving to a steady cycle, chaotic and complex CA. In order to make this part of the study Musical Dreams, a system for the simulation and musical rendering of one dimensional CA, has been used. In the second phase various CA obtained both by random generation and deriving from those studied in the first part are organised into families and, successively, made evolve through a genetic algorithm. This phase has been accomplished by using Harmony Seeker, a system for the generation of evolutionary music based on GA. The obtained results vary depending on the rendering systems used but, in general, automata belonging to the first family seem more indicated for the production of rhythmical patterns, while elements belonging to the second and fourth family seem to produce better harmonic patterns. Chaotic systems have been seen to produce good results only in presence of simple initial states. Experiments made in the second part have produced good harmonic results starting mainly from CA belonging to the second family.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	fa1b
authors	Haapasalo, H.
year	2000
title	Creative computer aided architectural design An internal approach to the design process
source	University of Oulu (Finland)
summary	This survey can be seen as quite multidisciplinary research. The basis for this study has been inapplicability of different CAD user interfaces in architectural design. The objective of this research is to improve architectural design from the creative problem-solving viewpoint, where the main goal is to intensify architectural design by using information technology. The research is linked to theory of methods, where an internal approach to design process means studying the actions and thinking of architects in the design process. The research approach has been inspired by hermeneutics. The human thinking process is divided into subconscious and conscious thinking. The subconscious plays a crucial role in creative work. The opposite of creative work is systematic work, which attempts to find solutions by means of logical inference. Both creative and systematic problem solving have had periods of predominance in the history of Finnish architecture. The perceptions in the present study indicate that neither method alone can produce optimal results. Logic is one of the tools of creativity, since the analysis and implementation of creative solutions require logical thinking. The creative process cannot be controlled directly, but by creating favourable work conditions for creativity, it can be enhanced. Present user interfaces can make draughting and the creation of alternatives quicker and more effective in the final stages of designing. Only two thirds of the architects use computers in working design, even the CAD system is being acquired in greater number of offices. User interfaces are at present inflexible in sketching. Draughting and sketching are the basic methods of creative work for architects. When working with the mouse, keyboard and screen the natural communication channel is impaired, since there is only a weak connection between the hand and the line being drawn on the screen. There is no direct correspondence between hand movements and the lines that appear on the screen, and the important items cannot be emphasized by, for example, pressing the pencil more heavily than normally. In traditional sketching the pen is a natural extension of the hand, as sketching can sometimes be controlled entirely by the unconscious. Conscious efforts in using the computer shift the attention away from the actual design process. However, some architects have reached a sufficiently high level of skill in the use of computer applications in order to be able to use them effectively in designing without any harmful effect on the creative process. There are several possibilities in developing CAD systems aimed at architectural design, but the practical creative design process has developed during a long period of time, in which case changing it in a short period of time would be very difficult. Although CAD has had, and will have, some evolutionary influences on the design process of architects as an entity, the future CAD user interface should adopt its features from the architect's practical and creative design process, and not vice versa.
keywords	Creativity, Systematicism, Sketching
series	thesis:PhD
email
more	http://herkules.oulu.fi/isbn9514257545/
last changed	2003/02/12 22:37

_id	ga0004
id	ga0004
authors	Lund, Andreas
year	2000
title	Evolving the Shape of Things to Come - A Comparison of Interactive Evolution and Direct Manipulation for Creative Tasks
source	International Conference on Generative Art
summary	This paper is concerned with differences between direct manipulation and interactive evolutionary design as two fundamentally different interaction styles for creative tasks. Its main contribution to the field of generative design is the treatment of interactive evolutionary design as a general interaction style that can be used to support users in creative tasks. Direct manipulation interfaces, a term coined by Ben Shneiderman in the mid-seventies, are the kind of interface that is characteristic of most modern personal computer application user interfaces. Typically, direct manipulation interfaces incorporate a model of a context (such as a desktop environment) supposedly familiar to users. Rather than giving textual commands (i.e. "remove file.txt", "copy file1.txt file2.txt") to an imagined intermediary between the user and the computer, the user acts directly on the objects of interest to complete a task. Undoubtedly, direct manipulation has played an important role in making computers accessible to non-computer experts. Less certain are the reasons why direct manipulation interfaces are so successful. It has been suggested that this kind of interaction style caters for a sense of directness, control and engagement in the interaction with the computer. Also, the possibilities of incremental action with continuous feedback are believed to be an important factor of the attractiveness of direct manipulation. However, direct manipulation is also associated with a number of problems that make it a less than ideal interaction style in some situations. Recently, new interaction paradigms have emerged that address the shortcomings of direct manipulation in various ways. One example is so-called software agents that, quite the contrary to direct manipulation, act on behalf of the user and alleviate the user from some of the attention and cognitive load traditionally involved in the interaction with large quantities of information. However, this relief comes at the cost of lost user control and requires the user to put trust into a pseudo-autonomous piece of software. Another emerging style of human-computer interaction of special interest for creative tasks is that of interactive evolutionary design (sometimes referred to as aesthetic selection). Interactive evolutionary design is inspired by notions from biological evolution and may be described as a way of exploring a large – potentially infinite – space of possible design configurations based on the judgement of the user. Rather than, as is the case with direct manipulation, directly influencing the features of an object, the user influences the design by means of expressing her judgement of design examples. Variations of interactive evolutionary design have been employed to support design and creation of a variety of objects. Examples of such objects include artistic images, web advertising banners and facial expressions. In order to make an empirical investigation possible, two functional prototypes have been designed and implemented. Both prototypes are targeted at typeface design. The first prototype allows a user to directly manipulate a set of predefined attributes that govern the design of a typeface. The second prototype allows a user to iteratively influence the design of a typeface by means of expressing her judgement of typeface examples. Initially, these examples are randomly generated but will, during the course of interaction, converge upon design configurations that reflect the user’s expressed subjective judgement. In the evaluation of the prototypes, I am specifically interested in users’ sense of control, convergence and surprise. Is it possible to maintain a sense of control and convergence without sacrificing the possibilities of the unexpected in a design process? The empirical findings seem to suggest that direct manipulation caters for a high degree of control and convergence, but with a small amount of surprise and sense of novelty. The interactive evolutionary design prototype supported a lower degree of experienced control, but seems to provide both a sense of surprise and convergence. One plausible interpretation of this is that, on the one hand, direct manipulation is a good interaction style for realizing the user’s intentions. On the other hand, interactive evolutionary design has a potential to actually change the user’s intentions and pre-conceptions of that which is being designed and, in doing so, adds an important factor to the creative process. Based on the empirical findings, the paper discusses situations when interactive evolutionary design may be a serious contender with direct manipulation as the principal interaction style and also how a combination of both styles can be applied.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddssar0001
id	ddssar0001
authors	Achten, Henri and Leeuwen, Jos van
year	2000
title	Towards generic representations of designs formalised as features
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Feature-Based Modelling (FBM) is an information modelling technique that allows the formalisation of design concepts and using these formal definitions in design modelling. The dynamic nature of design and design information calls for a specialised approach to FBM that takes into account flexibility and extensibility of Feature Models of designs. Research work in Eindhoven has led to a FBM framework and implementation that can be used to support design.. Feature models of a design process has demonstrated the feasibility of using this information modelling technique. To develop the work on FBM in design, three tracks are initiated: Feature model descriptions of design processes, automated generic representation recognition in graphic representations, and Feature models of generic representations. The paper shows the status of the work in the first two tracks, and present the results of the research work.
series	DDSS
last changed	2003/11/21 15:15

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
doi	https://doi.org/10.52842/conf.ecaade.2000.057
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	08ea
authors	Clayton, Mark J. and Vasquez de Velasco, Guillermo P. (Eds.)
year	2000
title	ACADIA 2000: Eternity, Infinity and Virtuality in Architecture
source	Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8 / Washington D.C. 19-22 October 2000, 284 p.
doi	https://doi.org/10.52842/conf.acadia.2000
summary	Eternity, time without end, infinity, space without limits and virtuality, perception without constraints; provide the conceptual framework in which ACADIA 2000 is conceived. It is in human nature to fill what is empty and to empty what is full. Today, thanks to the power of computer processing we can also make small what is too big, make big what is too small, make fast what is too slow, make slow what is too fast, make real what does not exist, and make our reality omni-present at global scale. These are capabilities for which we have no precedents. What we make of them is our privilege and responsibility. Information about a building flows past our keyboards and on to other people. Although we, as architects, add to the information, it originated before us and will go beyond our touch in time, space and understanding. A building description acquires a life of its own that may surpass our own lives as it is stored, transferred, transformed, and reused by unknown intellects, both human and artificial, and in unknown processes. Our actions right now have unforeseen effects. Digital media blurs the boundaries of space, time and our perception of reality. ACADIA 2000 explores the theme of time, space and perception in relation to the information and knowledge that describes architecture. Our invitation to those who are finding ways to apply computer processing power in architecture received overwhelming response, generating paper submissions from five continents. A selected group of reviewers recommended the publication of 24 original full papers out of 42 submitted and 13 short papers out of 30 submitted. Forty-two projects were submitted to the Digital Media Exhibit and 12 were accepted for publication. The papers cover subjects in design knowledge, design process, design representation, design communication, and design education. Fundamental and applied research has been carefully articulated, resulting in developments that may have an important impact on the way we practice and teach architecture in the future.
series	ACADIA
email
more	www.acadia.org
last changed	2022/06/07 07:49

_id	2e77
authors	Ekholm, A. and Fridqvist, S.
year	2000
title	A concept of space for building classification, product modelling, and design
source	Automation in Construction 9 (3) (2000) pp. 315-328
summary	Information about a building's spaces is of interest in every stage of the construction and facility management processes. An organisation1 or enterprise is located in and uses the building's spaces, and many of the building's spatial properties are determined on the basis of the user organisation's requirements. The definition of the concept "space" as applied in information systems for building classification and building product modelling today is unclear. A fundamental problem is to reconcile a material and construction method viewpoint with a space-centred viewpoint. In order to enable communication among actors and computer systems in the construction process, the concepts used in model development and the corresponding terms have to be formally defined and standardised. In this article, we analyse the concept of space and suggest a comprehensive definition for the construction context. The identification of a space in a building is based on a spatial view. We introduce the concept of aspectual unit and show how this concept can be used to integrate different aspect views in a conceptual schema. Additionally, we define the user organisation as a thing, which is separate from the building and has spatial properties of its own, so-called "activity spaces". Finally, we show how space may be represented in a comprehensive conceptual schema.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	2aec
authors	Oxman, Rivka
year	2000
title	Design media for the cognitive designer
source	Automation in Construction 9 (4) (2000) pp. 337-346
summary	Work on media for design which are responsive to the cognitive processes of the human designer are introduced as a paradigm for research and development. Design media are intended to support the cognitive nature of design and, particularly, the exploitation of design knowledge in computational environments. Basic theoretical assumptions are presented which underlie the development of design media. A central assumption is that designers share common forms of design knowledge which can be formalized, represented, and employed in computational environments. Generic knowledge is proposed as one such seminal form of design knowledge. We then develop a cognitive model which relates to the internal mental representations, strategies and mechanisms of generic design. The paper emphasizes the theoretical foundations of design media. This theoretical discussion is then exemplified through case studies presenting current research for the support of visual cognition in design. We introduce an approach to design schema as a visual form of generic design knowledge. Secondly we present a conceptual framework for the support of schema emergence in visual reasoning in design media. Finally, some implications of schema emergence in design collaboration are presented and discussed.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	ddssar0022
id	ddssar0022
authors	Peng, C., Cerulli, C., Lawson, B., Cooper, G., Rezqui, Y. and Jackson, M.
year	2000
title	Recording and managing design decision-making processes through an object-oriented framework
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	In this paper we describe our current research into an object-oriented approach to the recording and managing of design decision-making in the processes of building design. The Advanced Design Support for the Construction Design Process (ADS) project, funded under the Innovative Manufacturing Initiative by the UK Engineering and Physical Sciences Research Council (EPSRC), aims to exploit and demonstrate the benefits of a CAD-based Design Decision Support System. The research focuses on how to provide designers with tools for recording and managing the group dynamics of design decision making in a project's life time without intruding too much on the design process itself. In collaboration with Building Design Partnership, a large multidisciplinary construction design practice, we look at design projects that require decision-making on an extraordinarily wide range of complex issues, and many different professional consultants were involved in making and approving these decisions. We are interested in developing an advanced CAD tool that will facilitate capturing designers' rationales underlying their design decision making throughout the project. The system will also enable us to explore how a recorded project history of decision-making can be searched and browsed by members of the project team during and after design development.
series	DDSS
last changed	2003/08/07 16:36

_id	20ab
authors	Yakeley, Megan
year	2000
title	Digitally Mediated Design: Using Computer Programming to Develop a Personal Design Process
source	Massachusetts Institute of Technology, Department of Architecture
summary	This thesis is based on the proposal that the current system of architectural design education confuses product and process. Students are assessed through, and therefore concentrate on, the former whilst the latter is left in many cases to chance. This thesis describes a new course taught by the author at MIT for the last three years whose aim is to teach the design process away from the complexities inherent in the studio system. This course draws a parallel between the design process and the Constructionist view of learning, and asserts that the design process is a constant learning activity. Therefore, learning about the design process necessarily involves learning the cognitive skills of this theoretical approach to education. These include concrete thinking and the creation of external artifacts to develop of ideas through iterative, experimental, incremental exploration. The course mimics the Constructionist model of using the computer programming environment LOGO to teach mathematics. It uses computer programming in a CAD environment, and specifically the development of a generative system, to teach the design process. The efficacy of such an approach to architectural design education has been studied using methodologies from educational research. The research design used an emergent qualitative model, employing Maykut and Morehouses interpretive descriptive approach (Maykut & Morehouse, 1994) and Glaser and Strausss Constant Comparative Method of data analysis (Glaser & Strauss, 1967). Six students joined the course in the Spring 1999 semester. The experience of these students, what and how they learned, and whether this understanding was transferred to other areas of their educational process, were studied. The findings demonstrated that computer programming in a particular pedagogical framework, can help transform the way in which students understand the process of designing. The following changes were observed in the students during the course of the year: Development of understanding of a personalized design process; move from using computer programming to solve quantifiable problems to using it to support qualitative design decisions; change in understanding of the paradigm for computers in the design process; awareness of the importance of intrapersonal and interpersonal communication skills; change in expectations of, their sense of control over, and appropriation of, the computer in the design process; evidence of transference of cognitive skills; change from a Behaviourist to a Constructionist model of learning Thesis Supervisor: William J. Mitchell Title: Professor of Architecture and Media Arts and Sciences, School of Architecture and Planning
series	thesis:PhD
last changed	2003/02/12 22:37

_id	ae0f
authors	Ceccato, C., Simondetti, SA. and Burry, M.C.
year	2000
title	Mass-Customization in Design Using Evolutionary and Parametric Methods
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 239-244
doi	https://doi.org/10.52842/conf.acadia.2000.239
summary	This paper describes a project within the authors’ ongoing research in the field of Generative Design. The work is based on the premise that computer-aided design (CAD) should evolve beyond its current limitation of one-way interaction, and become a dynamic, intelligent, multi-user environment that encourages creativity and actively supports the evolution of individual, mass-customized designs which exhibit common features. The authors describe this idea by illustrating the implementation of a research project, which explores the notions of mass-customization in design by using evolutionary and parametric methods to generate families of simple objects, in our case a door handle. The project examines related approaches using both complex CAD/CAM packages (CADDS, CATIA) and a proprietary software tool for evolutionary design. The paper first gives a short historical and philosophical background to the work, then describes the technical and algorithmic requirements, and concludes with the implementations of the project.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ga0019
id	ga0019
authors	Ceccato, Cristiano
year	2000
title	On the Translation of Design Data into Design Form in Evolutionary Design
source	International Conference on Generative Art
summary	The marriage of advanced computational methods and new manufacturing technologies give rise to new paradigms in design process and execution. Specifically, the research concerns itself with the application of Generative and Evolutionary computation to the production of mass-customized products and building components. The work is based on the premise that CAD-CAM should evolve into a dynamic, intelligent, multi-user environment that encourages creativity and actively supports the evolution of individual, mass-customized designs that exhibit common features. The concept of Parametric Design is well established, and chiefly concerns itself with generating design sets that exists within the boundaries of pre-set parametric values. Evolutionary Design extends the notion of parametric control by using rule-based generative algorithms to evolve common families of individual design solutions. These can be optimized according to particular criteria, or can form a wide variety of hierarchically related design solutions, while supporting design intuition. The integration of Evolutionary Design with CAD-CAM, in particular the areas of flexible manufacturing and mass-customization, creates a unique scenario which exploits the full power of both approaches to create a new design-process paradigm that can generate limitless possibilities in a non-deterministic manner within a variable search-space of possible solutions.This paper concerns itself with the technical and philosophical aspects of the codification, generation and translation of data within the evolutionary-parametric design process. The efficiency and relevance of different methods for treating design data form the most fundamental aspect within the realm of CAD/CAM and are crucial to the successful implementation of Evolutionary Design mechanisms. This begins at the level of seeding and progresses through the entire evolutionary sequence, including the codification for evaluation criteria. Furthermore, the integration of digital design mechanisms with CAM and CNC technologies requires further translation of data into manufacturable formats. This paper examines different methods available to system designers and discussed their effect on new paradigms of digital design methods.
keywords	Evolutionary, Parametric, Generative, Data, Format, Objects, Codification
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	b966
authors	Ceccato, Cristiano and Janssen, Patrick
year	2000
title	GORBI: Autonomous Intelligent Agents Using Distributed Object-Oriented Graphics
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 297-300
doi	https://doi.org/10.52842/conf.ecaade.2000.297
summary	Autonomous agents represent a new form of thinking that is of primary importance in the age of the Internet and distributed networks, and provide a platform on which Turing’s model of sequential instruction-executing machines and von NeumannÕs connectionist vision of interconnected, concurrent fine-grain processors may be reconciled. In this paper we map this emergent paradigm to design and design intelligence by to illustrating examples of decentralised interacting agents projects.
keywords	Graphics, CAD, Internet, Evolutionary, Generative, Distributed, Decentralised, Object, Request, Broker, CORBA, OpenGL, Java, C++
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	sigradi2006_e183a
id	sigradi2006_e183a
authors	Costa Couceiro, Mauro
year	2006
title	La Arquitectura como Extensión Fenotípica Humana - Un Acercamiento Basado en Análisis Computacionales [Architecture as human phenotypic extension – An approach based on computational explorations]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 56-60
summary	The study describes some of the aspects tackled within a current Ph.D. research where architectural applications of constructive, structural and organization processes existing in biological systems are considered. The present information processing capacity of computers and the specific software development have allowed creating a bridge between two holistic nature disciplines: architecture and biology. The crossover between those disciplines entails a methodological paradigm change towards a new one based on the dynamical aspects of forms and compositions. Recent studies about artificial-natural intelligence (Hawkins, 2004) and developmental-evolutionary biology (Maturana, 2004) have added fundamental knowledge about the role of the analogy in the creative process and the relationship between forms and functions. The dimensions and restrictions of the Evo-Devo concepts are analyzed, developed and tested by software that combines parametric geometries, L-systems (Lindenmayer, 1990), shape-grammars (Stiny and Gips, 1971) and evolutionary algorithms (Holland, 1975) as a way of testing new architectural solutions within computable environments. It is pondered Lamarck´s (1744-1829) and Weismann (1834-1914) theoretical approaches to evolution where can be found significant opposing views. Lamarck´s theory assumes that an individual effort towards a specific evolutionary goal can cause change to descendents. On the other hand, Weismann defended that the germ cells are not affected by anything the body learns or any ability it acquires during its life, and cannot pass this information on to the next generation; this is called the Weismann barrier. Lamarck’s widely rejected theory has recently found a new place in artificial and natural intelligence researches as a valid explanation to some aspects of the human knowledge evolution phenomena, that is, the deliberate change of paradigms in the intentional research of solutions. As well as the analogy between genetics and architecture (Estévez and Shu, 2000) is useful in order to understand and program emergent complexity phenomena (Hopfield, 1982) for architectural solutions, also the consideration of architecture as a product of a human extended phenotype can help us to understand better its cultural dimension.
keywords	evolutionary computation; genetic architectures; artificial/natural intelligence
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	c991
authors	Moorhouse, Jon and Brown,Gary
year	1999
title	Autonomous Spatial Redistribution for Cities
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 678-684
doi	https://doi.org/10.52842/conf.ecaade.1999.678
summary	The paper investigates an automated methodology for the appropriate redistribution of usable space in distressed areas of inner cities. This is achieved by categorising activity space and making these spaces morphologically mobile in relation to the topography within a representative artificial space. The educational module has been influenced by theories from the natural environment, which possess patterns that have inherent evolutionary programmes in which the constituents are recyclable, Information is strategically related to the environment to produce forms of growth and behaviour. Artificial landscape patterns fail to evolve, the inhabited landscape needs a means of starting from simplicity and building into the most complex of systems that are capable of re-permutation over time. The paper then describes the latest methodological development in terms of a shift from the use of the computer as a tool for data manipulation to embracing the computer as a design partner. The use of GDL in particular is investigated as a facilitator for such generation within a global, vectorial environment.
keywords	Animated, Urban, Programme, Education, Visual Database
series	eCAADe
email
last changed	2022/06/07 07:58

For more results click below: