Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 749

Reformat results as: short short into frame detailed detailed into frame

_id	dbfa
authors	Ucelli, G., Conti, G., Lindsay, M. and Ryder, G.
year	2000
title	From “Soft” to “Hard” Prototyping: A Unique Combination of VR and RP for Design
source	Proceedings from UkVRSig 2000, Glasgow
summary	This paper will highlight innovative approaches to the building design process made possible by the application of two of the most sophisticated technologies currently available: Virtual Reality (VR) and Rapid Prototyping (RP). These will be discussed by drawing examples from recent case studies.
series	other
last changed	2003/04/23 15:50

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	01c0
authors	Af Klercker, Jonas
year	2000
title	Modelling for Virtual Reality in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2000.209
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 209-213
summary	CAAD systems are using object modelling methods for building databases to make information available. Object data must then be made useful for many different purposes in the design process. Even if the capacity of the computer will allow an almost unlimited amount of information to be transformed, the eye does not make the transformations in the same “simple” mathematical way. Trained architects have to involve in an inventive process of finding ways to “harmonize” this new medium with the human eye and the architect’s professional experience. This paper will be an interimistic report from a surveying course. During the spring semester 2000 the CAAD division of TU-Lund is giving a course “Modelling for VR in Architecture”. The students are practising architects with experience from using object modelling CAAD. The aims are to survey different ways to use available hard- and software to create VR-models of pieces of architecture and evaluate them in desktop and CAVE environments. The architect is to do as much preparation work as possible with his CAAD program and only the final adjustments with the special VR tool.
keywords	CAAD, VR, Modelling, Spatial Experience
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	3936
authors	Geroimenko, Vladimir
year	1999
title	Online Photorealistic VR with Interactive Architectural Objects
doi	https://doi.org/10.52842/conf.ecaade.1999.414
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 414-417
summary	This paper describes how Virtual Reality (VR) technologies can be used for modelling photorealistic environments with interactive and changeable architectural content. This application of VR allows us to create photograph-based panoramic models of real places that include a variety of interactive architectural objects and details. The user is able not only to navigate through a virtual environment (look around, up and down, zoom, jump to another viewpoint or location) but also to change buildings or their architectural details by clicking, moving or rotating. The following types of interactive objects are completely integrated with a virtual environment: 2D image-based objects, 3D image-based objects, 3D VRML-based objects and onscreen world controls. The application can be used effectively for teaching, including distance Internet-based education, project presentations and rapid prototyping. A sample VR environment is presented and some of the key creative and technological issues are discussed.
keywords	Virtual Reality Modelling, Architectural Design, Interactive Contents, Photorealistic Environments
series	eCAADe
email
last changed	2022/06/07 07:51

_id	63b9
authors	Jabi, Wassim
year	2000
title	Visualizing and Investigating Architectural Space Using Spherical Panoramic Imaging
source	Emerging Technologies and Design: The Intersection of Design and Technology, Proceedings of the 2000 ACSA Technology Conference, Massachusetts Institute of Technology, Cambridge, Massachusetts, July 14-17, 2000
summary	This paper reports on the use of immersive spherical imaging techniques to document, visualize and investigate architectural space. This technology can be used in the classrooms and design studios to augment traditional instructional and design investigation tools. As opposed to cylindrical imaging found in the popular QuickTime VR format, spherical imaging provides a 360-degree view in all directions – horizontally and vertically. The ability to capture and display a full sphere can be crucial for many interior architectural spaces. Spherical panoramas can originate from real, synthetic or hybrid source images. In addition to the ability to embed links to web pages or other panoramas, a unique feature of this technology allows the viewer to navigate through a scene as well as pause at any point and view the space in all directions. In addition, the technology allows the user to sketch over the scene in an intelligent manner such that the sketched artifacts rotate correctly when the target view shifts. The software also integrates with collaborative tools to allow synchronous viewing of shared panoramas over the Internet. These features allow for a truly immersive and interactive experience of the space that can be quite useful in a design studio setting. Finally, this paper describes ongoing efforts to integrate this technology with an interactive web-based, databasedriven virtual slide tray system for the storage, sorting, and display of multimedia content.
keywords	Spherical Panoramic Imaging
series	other
email
last changed	2002/03/05 19:55

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	5f69
authors	Kvan, Th., Gibson, I. and Ming, L.W.
year	2000
title	Rapid Prototyping for Architectural Models
source	ECPPM2000 – Product and Process Modelling in Building and Construction, Lisbon, Portugal, Balkema Publishers, September 25-27, 2000, pp. 351-359
summary	Rapid prototyping (RP) technology has developed as a result of the requirements of manufacturing industry. There are a number of other application areas where RP has been used to good effect and one of these is architectural modelling. However; such application areas often have different requirements from what is offered by the current technology. This paper describes work carried out by the authors to investigate potential applications for architectural modelling; as well as an attempt to explore the limits of the technology. It will go on to discuss how the technology may be developed to better serve the requirements of architects.
keywords	Rapid Prototyping; Architectural Design
series	other
email
last changed	2002/11/15 18:29

_id	sigradi2023_467
id	sigradi2023_467
authors	Scheeren, Rodrigo and Sperling, David Moreno
year	2023
title	In between revolutions or the state of digital fabrication technologies in South America academia: a systematic and critical review
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 555–566
summary	The main objective of this article is to grasp how technologies, techniques, and concepts related to Digital Fabrication were applied by South American players, in academic production from 2000 to 2021, through pedagogical activities, design projects, manufacturing processes, prototypes, and artifacts. We conducted a systematic review of publications from SIGraDi and eCAADe conferences, by authors active in South America during the period, identified from the CumInCAD database using the following terms: digital fabrication, digital manufacturing, digital fabrication, digital fabrication, rapid prototyping, CAD/CAM, robot* and 3d print*. 260 articles met the final criteria for inclusion, organized from the combination of 10 categories. The results show the dissemination of information about digital fabrication in many countries, focused on different trends of research and innovation, allowing us to understand the evolution of technological appropriation, thus offering an in-depth overview of our situation over the past 20 years.
keywords	Digital Fabrication, Technological Appropriation, Systematic Review, Design Process, Digital Theory.
series	SIGraDi
email
last changed	2024/03/08 14:07

_id	4eb5
authors	Stellingwerff, Martijn and Verbeke, Johan (Eds.)
year	2001
title	ACCOLADE - Architecture, Collaboration, Design
source	Delft University Press (DUP Science) / ISBN 90-407-2216-1Ý/ The Netherlands, 202 p. [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	This book is the outcome of the Euro-Workshop {ACCOLADE} which took place from 28th of August till 1st of September 2000. The Euro-Workshop was funded by the European Commission through the Fifth Framework of Research. Young and senior researchers worked together on the theme of Architectural Collaborative Design. The set of traditional papers is supplemented by a report on the brainstorm and working sessions which produced a lot of materials for future research directions. They are summarized in a research agenda. The global scheme gives a structure for the different sub-themes ranging from communication language, communication behaviour, communication environment, goals and roles and education. The combination of technical reflections and human aspects makes this book a unique position in the field of collaborative design. The name {ACCOLADE} is an acronym for Architectural Collaborative Design. The association of this name is positive because the accolade sign brings a number of different words together in a group. E.g. {England, Belgium, the Netherlands, Italy, ...}. The meaning of the word in English is 'a mark of honour' and the French meaning of the word is a 'solemn embrace'. It also refers to the multi-disciplinary design process. These connotations can be useful for a collaboration project in which many different people and parties plan to make a joint design effort.
series	other
email
last changed	2001/09/14 21:30

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	37c2
authors	Ahmad Rafi, M.E.
year	1999
title	Visualisation of Design Using Animation for Virtual Prototyping
doi	https://doi.org/10.52842/conf.ecaade.1999.519
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 519-525
summary	Although recent technology in time-based representation has vastly improved, animation in virtual prototype design field remains the same. Some designers invest a huge amount of money in the latest visualisation and multimedia technology and yet may create even worse animation. They often cramp sequences resulting in many viewers failing to interpret the design positively as they miss a lot of vital information that explains the design. This paper basically reports the importance of film-making understanding for producing good virtual prototype animation. It will be based on a part of a research project on the use of time-based media in architectural practices. It also includes an empirical analysis of several architectural-based documentary films (including an interview with the film director) and past and present computer animation. This paper then concludes with recommendations of good techniques for making animated visualisation relative to the stage at which the animation is produced for better design decision.
keywords	Virtual Prototype, Animation, Time-Based, Film-Making
series	eCAADe
email
last changed	2022/06/07 07:54

_id	b0e7
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2000
title	The Re-Convergence of Art and Science: A Vehicle for Creativity
doi	https://doi.org/10.52842/conf.caadria.2000.491
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 491-500
summary	Ever-increasing complexity in product design and the need to deliver a cost-effective solution that benefits from a dynamic approach requires the employment and adoption of innovative design methods which ensure that products are of the highest quality and meet or exceed customers' expectations. According to Bronowski (1976) science and art were originally two faces of the same human creativity. However, as civilisation advances and works became specialised, the dichotomy of science and art gradually became apparent. Hence scientists and artists were born, and began to develop work that was polar opposite. The sense of beauty itself became separated from science and was confined within the field of art. This dichotomy existed through mankind's efforts in advancing civilisation to its present state. This paper briefly examines the relationship between art and science through the ages and discusses their relatively recent re-convergence. Based on this hypothesis, this paper studies the current state of the convergence between arts and sciences and examines the current relationship between the two by considering real world applications and products. The study of such products and their successes and impact they had in the marketplace due to their designs and aesthetics rather than their advanced technology that had partially failed them appears to support this argument. This text further argues that a re-convergence between art and science is currently occurring and highlights the need for accelerating this process. It is suggested that re-convergence is a result of new technologies which are adopted by practitioners that include effective visualisation and communication of ideas and concepts. Such elements are widely found today in multimedia and Virtual Environments (VEs) where such tools offer increased power and new abilities to both scientists and designers as both venture in each other's domains. This paper highlights the need for the employment of emerging computer based real-time interactive technologies that are expected to enhance the design process through real-time prototyping and visualisation, better decision-making, higher quality communication and collaboration, lessor error and reduced design cycles. Effective employment and adoption of innovative design methods that ensure products are delivered on time, and within budget, are of the highest quality and meet customer expectations are becoming of ever increasing importance. Such tools and concepts are outlined and their roles in the industries they currently serve are identified. Case studies from differing fields are also studied. It is also suggested that Virtual Reality interfaces should be used and given access to Computer Aided Design (CAD) model information and data so that users may interrogate virtual models for additional information and functionality. Adoption and appliance of such integrated technologies over the Internet and their relevance to electronic commerce is also discussed. Finally, emerging software and hardware technologies are outlined and case studies from the architecture, electronic games, and retail industries among others are discussed, the benefits are subsequently put forward to support the argument. The requirements for adopting such technologies in financial, skills required and process management terms are also considered and outlined.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	1f5c
authors	Beesley, Philip and Seebohm, Thomas
year	2000
title	Digital Tectonic Design
doi	https://doi.org/10.52842/conf.ecaade.2000.287
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 287-290
summary	Digital tectonic design is a fresh approach to architectural design methodology. Tectonics means a focus on assemblies of construction elements. Digital tectonics is an evolving methodology that integrates use of design software with traditional construction methods. We see digital tectonic design as a systematic use of geometric and spatial ordinances, used in combination with details and components directly related to contemporary construction. The current approach will, we hope, lead to an architectural curriculum based on generative form making where the computer can be used to produce systems of forms algorithmically. Digital design has tended to remain abstract, emphasizing visual and spatial arrangements often at the expense of materials and construction. Our pursuit is translation of these methods into more fully realized physical qualities. This method offers a rigorous approach based on close study of geometry and building construction elements. Giving a context for this approach, historical examples employing systematic tectonic design are explored in this paper. The underlying geometric ordinance systems and the highly tuned relationships between the details in these examples offer design vocabularies for use within the studio curriculum. The paper concludes with a detailed example from a recent studio project demonstrating particular qualities developed within the method. The method involves a wide range of scales, relating large-scale gestural and schematic studies to detailed assembly systems. Designing in this way means developing geometric strategies and, in parallel, producing detailed symbols or objects to be inserted. These details are assembled into a variety of arrays and groups. The approach is analogous to computer-aided designÕs tradition of shape grammars in which systems of spatial relationships are used to control the insertion of shapes within a space. Using this approach, a three-dimensional representation of a building is iteratively refined until the final result is an integrated, systematically organized complex of symbols representing physical building components. The resulting complex offers substantial material qualities. Strategies of symbol insertions and hierarchical grouping of elements are familiar in digital design practice. However these strategies are usually used for automated production of preconceived designs. In contrast to thsse normal approaches this presentation focuses on emergent qualities produced directly by means of the complex arrays of symbol insertions. The rhyth
keywords	3D CAD Systems, Design Practice, 3D Design Strategies
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2000.057
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	9d16
authors	Chan, Chiu-Shui
year	2000
title	A Virtual Reality Tool to Implement City Building Codes on Capitol View Preservation
doi	https://doi.org/10.52842/conf.acadia.2000.203
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 203-209
summary	In urban planning, the urban environment is a very complicated system with many layers of building codes cross-referenced and interacting together to guide urban growth. Especially, if a new urban design is located in a historical area, additional restrictions will be imposed upon regular zoning regulations to maintain the area’s historical characteristics. Often, urban regulations read as text are difficult to understand. A tool that generates adequate urban information and a quick visualization of the design will ease decision-making and enhance urban design processes. The goal of this research project is to develop a virtual reality (VR) tool with high resolution, speedy computation, and a userfriendly environment. This project initiates an interactive visualization tool to enforce city-planning regulations on viewing access to the state capitol building in Des Moines, Iowa. The capitol building houses the Iowa Legislature and is a symbol of state power. Maintaining the view from surrounding areas will preserve the building’s monumental and symbolic meaning. To accomplish this, the City Community Development Department and the Capitol Planning Committee developed a Capitol View Corridor Project, which sets up seven visual corridors to prevent the view toward the capitol from being blocked by any future designs. Because city regulations are not easy for the public and designers to interpret and comprehend, this project intends to develop a VR tool to create a transparent environment for visualizing the city ordinances.
series	ACADIA
last changed	2022/06/07 07:56

_id	ga0020
id	ga0020
authors	Codignola, G.Matteo
year	2000
title	[Title missing]
source	International Conference on Generative Art
summary	This paper is a summary of my last degree in architecture (discussed in December 1999) with Prof. Celestino Soddu and Prof. Enrica Colabella. In this work I had the possibility to reach complexity by a generative approach with the construction of a paradigm that organizes the different codes of project identity. My general objective was to design shape complexity in variable categories : 3d space surfaces, 2d drawings and 2d textures. I was to discover the identity of one of my favourite architects of the 20th century : Antoni Gaudì, by constructing codes relative to shape complexity. I defined my particular objective in the possibility to abduct from Gaudì's imaginary reference the generatives codes that operate in the logical processing I use to create a possible species project. The next step was to verify the exact working of the new generative codes by means of 3d scenaries, that are recognizable as "Antoni Gaudì specie's architecture". Whit project processing on the generative codes and not on a possible resulting shape design, I was able to organize by my general paradigm the attributes of the project's species : different shapes, different attributes (color, scale, proportion), to get to possible and different scenarys, all recognizable by the relative class codes. I chose three examples in Barcellona built during the period 1902 to 1914 : The Parco Guell, Casa Batllò and Casa Milà are the three reference sceneryes that I used to create the generative codes. In the second step I defined different codes that operate in sequence (it is defined in the paradigm) : The generatives codes are only subjective; they are one possible solution of my interpretation of Antoni Gaudì's identity. This codes operate in four differents ways : Geometrical codes for 2d shapes Geometrical codes for interface relations Spatial codes for 3d extrusion of 2d shapes Geometrical codes for 2d and 3d texturing of generated surfaces. By a stratified application of this codes I arrived at one idea for all the generative processes but many different, possible scenaryes, all recognizable in Gaudì's species. So, my final result has made possible sceneryes belonging to related species defined previously. At the end of my research I designed a project by combination : using Antoni Gaudì's generative codes on a new 3d scenary with a shape catalyst : the Frank Lloyd Wright Guggenheim Museum of New York. In this process I created a "hybrid scenary" : a new species of architectural look; a Guggenheim museum planned by Wright with a god pinch of Gaudì.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	de43
authors	Counsell, J.
year	2000
title	The management and visualisation of 3-dimensional models using a spatial database
source	CIDAC, Volume 2 Issue 4 November 2000, pp. 225-235
summary	Each year, computer-aided architectural design (CAAD) systems in common use are enhanced and gain facilities that ease 3-dimensional (3D) modelling. Consequently, large complex datasets are increasinly common during the creation and management of 3D models of buildings and urban areas. Uses for such models range from the automatic generation of drawings and schedules to virtual reality (VR) and visualisation across the web. Geographic information systems (GISs) are optimised for the management and retrieval of spatial data and may be used to assist both management and visualisation of large 3D datasets using open standards, such as the ISO standard virtual reality modelling langauge (VRML). Experience gained in the use of such systems indicates a need for specific procedures for recording 3D data and creating linkages to other information. It is suggested that these procedures are applicable to a broad range of such models.
keywords	VRML, Urban 3-Dimensional Models, GIS Management
series	journal paper
last changed	2003/05/15 21:23

_id	ec4d
authors	Croser, J.
year	2001
title	GDL Object
source	The Architect’s Journal, 14 June 2001, pp. 49-50
summary	It is all too common for technology companies to seek a new route to solving the same problem but for the most part the solutions address the effect and not the cause. The good old-fashioned pencil is the perfect example where inventors have sought to design-out the effect of the inherent brittleness of lead. Traditionally different methods of sharpening were suggested and more recently the propelling pencil has reigned king, the lead being supported by the dispensing sleeve thus reducing the likelihood of breakage. Developers convinced by the Single Building Model approach to design development have each embarked on a difficult journey to create an easy to use feature packed application. Unfortunately it seems that the two are not mutually compatible if we are to believe what we see emanating from Technology giants Autodesk in the guise of Architectural Desktop 3. The effect of their development is a feature rich environment but the cost and in this case the cause is a tool which is far from easy to use. However, this is only a small part of a much bigger problem, Interoperability. You see when one designer develops a model with one tool the information is typically locked in that environment. Of course the geometry can be distributed and shared amongst the team for use with their tools but the properties, or as often misquoted, the intelligence is lost along the way. The effect is the technological version of rubble; the cause is the low quality of data-translation available to us. Fortunately there is one company, which is making rapid advancements on the whole issue of collaboration, and data sharing. An old timer (Graphisoft - famous for ArchiCAD) has just donned a smart new suit, set up a new company called GDL Technology and stepped into the ring to do battle, with a difference. The difference is that GDL Technology does not rely on conquering the competition, quite the opposite in fact their success relies upon the continued success of all the major CAD platforms including AutoCAD, MicroStation and ArchiCAD (of course). GDL Technology have created a standard data format for manufacturers called GDL Objects. Product manufacturers such as Velux are now able to develop product libraries using GDL Objects, which can then be placed in a CAD model, or drawing using almost any CAD tool. The product libraries can be stored on the web or on CD giving easy download access to any building industry professional. These objects are created using scripts which makes them tiny for downloading from the web. Each object contains 3 important types of information: · Parametric scale dependant 2d plan symbols · Full 3d geometric data · Manufacturers information such as material, colour and price Whilst manufacturers are racing to GDL Technologies door to sign up, developers and clients are quick to see the benefit too. Porsche are using GDL Objects to manage their brand identity as they build over 300 new showrooms worldwide. Having defined the building style and interior Porsche, in conjunction with the product suppliers, have produced a CD-ROM with all of the selected building components such as cladding, doors, furniture, and finishes. Designing and detailing the various schemes will therefore be as straightforward as using Lego. To ease the process of accessing, sizing and placing the product libraries GDL Technology have developed a product called GDL Object Explorer, a free-standing application which can be placed on the CD with the product libraries. Furthermore, whilst the Object Explorer gives access to the GDL Objects it also enables the user to save the object in one of many file formats including DWG, DGN, DXF, 3DS and even the IAI's IFC. However, if you are an AutoCAD user there is another tool, which has been designed especially for you, it is called the Object Adapter and it works inside of AutoCAD 14 and 2000. The Object Adapter will dynamically convert all GDL Objects to AutoCAD Blocks during placement, which means that they can be controlled with standard AutoCAD commands. Furthermore, each object can be linked to an online document from the manufacturer web site, which is ideal for more extensive product information. Other tools, which have been developed to make the most of the objects, are the Web Plug-in and SalesCAD. The Plug-in enables objects to be dynamically modified and displayed on web pages and Sales CAD is an easy to learn and use design tool for sales teams to explore, develop and cost designs on a Notebook PC whilst sitting in the architects office. All sales quotations are directly extracted from the model and presented in HTML format as a mixture of product images, product descriptions and tables identifying quantities and costs. With full lifecycle information stored in each GDL Object it is no surprise that GDL Technology see their objects as the future for building design. Indeed they are not alone, the IAI have already said that they are going to explore the possibility of associating GDL Objects with their own data sharing format the IFC. So down to the dirty stuff, money and how much it costs? Well, at the risk of sounding like a market trader in Petticoat Lane, "To you guv? Nuffin". That's right as a user of this technology it will cost you nothing! Not a penny, it is gratis, free. The product manufacturer pays for the license to host their libraries on the web or on CD and even then their costs are small costing from as little as 50p for each CD filled with objects. GDL Technology has come up trumps with their GDL Objects. They have developed a new way to solve old problems. If CAD were a pencil then GDL Objects would be ballistic lead, which would never break or loose its point. A much better alternative to the strategy used by many of their competitors who seek to avoid breaking the pencil by persuading the artist not to press down so hard. If you are still reading and you have not already dropped the magazine and run off to find out if your favorite product supplier has already signed up then I suggest you check out the following web sites www.gdlcentral.com and www.gdltechnology.com. If you do not see them there, pick up the phone and ask them why.
series	journal paper
email
last changed	2003/04/23 15:14

_id	389b
authors	Do, Ellen Yi-Luen
year	2000
title	Sketch that Scene for Me: Creating Virtual Worlds by Freehand Drawing
doi	https://doi.org/10.52842/conf.ecaade.2000.265
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 265-268
summary	With the Web people can now view virtual threedimensional worlds and explore virtual space. Increasingly, novice users are interested in creating 3D Web sites. Virtual Reality Modeling Language gained ISO status in 1997, although it is being supplanted by the compatible Java3D API and alternative 3D Web technologies compete. Viewing VRML scenes is relatively straightforward on most hardware platforms and browsers, but currently there are only two ways to create 3D virtual scenes: One is to code the scene directly using VRML. The other is to use existing CAD and modeling software, and save the world in VRML format or convert to VRML from some other format. Both methods are time consuming, cumbersome, and have steep learning curves. Pen-based user interfaces, on the other hand, are for many an easy and intuitive method for graphics input. Not only are people familiar with the look and feel of paper and pencil, novice users also find it less intimidating to draw what they want, where they want it instead of using a complicated tool palette and pull-down menus. Architects and designers use sketches as a primary tool to generate design ideas and to explore alternatives, and numerous computer-based interfaces have played on the concept of "sketch". However, we restrict the notion of sketch to freehand drawing, which we believe helps people to think, to envision, and to recognize properties of the objects with which they are working. SKETCH employs a pen interface to create three-dimensional models, but it uses a simple language of gestures to control a three-dimensional modeler; it does not attempt to interpret freehand drawings. In contrast, our support of 3D world creation using freehand drawing depend on users’ traditional understanding of a floor plan representation. Igarashi et al. used a pen interface to drive browsing in a 3D world, by projecting the user’s marks on the ground plane in the virtual world. Our Sketch-3D project extends this approach, investigating an interface that allows direct interpretation of the drawing marks (what you draw is what you get) and serves as a rapid prototyping tool for creating 3D virtual scenes.
keywords	Freehand Sketching, Pen-Based User Interface, Interaction, VRML, Navigation
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	70c4
authors	Gross, M.D., Do, E.Y.-L. and Johnson, B.R.
year	2000
title	Beyond the low-hanging fruit: Information technology in architectural design past, present and future
source	W. Mitchell and J. Fernandez (eds), ACSA Technology Conference, MIT Press, Cambridge MA
summary	Today's commercial CAD software is the product of years of research that began in the 1960's and 1970's. These applications have found widespread use in the architectural marketplace; nevertheless they represent only the first fruits of research in computer aided design. New developments based on research in human-computer interaction (HCI), computer-supported collaborative work (CSCW), and virtual reality (VR) will result in a next generation of tools for architectural design. Although preliminary applications to design have been demonstrated in each of these areas, excellent opportunities remain to exploit new technologies and insights in service of better design software. In this paper we briefly examine each of these areas using examples from our own work to discuss the prospects for future research. We envision that future design technologies will develop from current and traditional conventions of practice combined with forward looking application of emerging technologies. In HCI, pen based interaction will allow architects to use the pencil again, without sacrificing the added power of computer aided design tools, and speech recognition will begin to play a role in capturing and retrieving design critique and discussion. In CSCW, a new generation of applications will address the needs of designers more closely than current general purpose meeting tools. In VR, applications are possible that use the technology not simply to provide a sense of three-dimensional presence, but that organize design information spatially, integrating it into the representation of artifacts and places.
series	other
email
last changed	2003/04/23 15:50

For more results click below: