Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 743

Reformat results as: short short into frame detailed detailed into frame

_id	8802
authors	Burry, Mark, Dawson, Tony and Woodbury, Robert
year	1999
title	Learning about Architecture with the Computer, and Learning about the Computer in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1999.374
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 374-382
summary	Most students commencing their university studies in architecture must confront and master two new modes of thought. The first, widely known as reflection-in-action, is a continuous cycle of self-criticism and creation that produces both learning and improved work. The second, which we call here design making, is a process which considers building construction as an integral part of architectural designing. Beginning students in Australia tend to do neither very well; their largely analytic secondary education leaves the majority ill-prepared for these new forms of learning and working. Computers have both complicated and offered opportunities to improve this situation. An increasing number of entering students have significant computing skill, yet university architecture programs do little in developing such skill into sound and extensible knowledge. Computing offers new ways to engage both reflection-in-action and design making. The collaboration between two Schools in Australia described in detail here pools computer-based learning resources to provide a wider scope for the education in each institution, which we capture in the phrase: Learn to use computers in architecture (not use computers to learn architecture). The two shared learning resources are Form Making Games (Adelaide University), aimed at reflection-in-action and The Construction Primer (Deakin University and Victoria University of Wellington), aimed at design making. Through contributing to and customising the resources themselves, students learn how designing and computing relate. This paper outlines the collaborative project in detail and locates the initiative at a time when the computer seems to have become less self-consciously assimilated within the wider architectural program.
keywords	Reflection-In-Action, Design Making, Customising Computers
series	eCAADe
email
last changed	2022/06/07 07:54

_id	44be
authors	Radford, Antony
year	2000
title	Games and learning about form in architecture
source	Automation in Construction 9 (4) (2000) pp. 379-385
summary	Metaphors of play and games in the use of digital media in architectural education are described. The essence of 'games' lies in a person's immersion in play subject to rules. The paper argues that embracing these metaphors is an effective means of developing student confidence and abilities in spatial modelling, design composition, and form creation. Some examples are provided.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	dba1
authors	Hirschberg, Urs and Wenz, Florian
year	2000
title	Phase(x) - memetic engineering for architecture
source	Automation in Construction 9 (4) (2000) pp. 387-392
summary	Phase(x) was a successful teaching experiment we made in our entry level CAAD course in the Wintersemester 1996/1997. The course was entirely organized by means of a central database that managed all the students' works through different learning phases. This set-up allowed that the results of one phase and one author be taken as the starting point for the work in the next phase by a different author. As students could choose which model they wanted to work with, the whole of Phase(x) could be viewed as an organism where, as in a genetic system, only the "fittest" works survived. While some discussion of the technical set-up is necessary as a background, the main topics addressed in this paper will be the structuring in phases of the course, the experiences we had with collective authorship, and the observations we made about the memes2 that developed and spread in the students' works. Finally we'll draw some conclusions in how far Phase(x) is relevant also in a larger context, which is not limited to teaching CAAD. Since this paper was first published in 1997, we have continued to explore the issues described here in various projects3 together with a growing number of other interested institutions worldwide. While leaving the paper essentially in its original form, we added a section at the end, in which we outline some of these recent developments.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	6b7d
authors	Mishima, Yoshitaka and Szalapaj, Peter
year	1999
title	ADMIRE: an Architectural Design Multimedia Interaction Resource for Education
doi	https://doi.org/10.52842/conf.ecaade.1999.201
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 201-209
summary	This paper describes the development of a multimedia system called ADMIRE (an Architectural Design Multimedia Interaction Resource for Education), which enables undergraduate students to understand how to analyse existing buildings dynamically, as well as to develop their own initial architectural design theories. The system contains architectural information in the form of fully rendered models, conceptual illustrations created with a range of CAD software, and multimedia presentations showing various design theoretic analyses. Buildings are described with CAD generated images, and architects with profiles and theories. In addition to rendered designs, there are also conceptual models of each building in the system. Conceptual models are simplified forms of original designs in order to support an analytical understanding of buildings according to various analyses, such as structure, light, circulation, unit to whole, geometry, etc. Each conceptual model constitutes a different analysis of each building. The ADMIRE system links each piece of information to another, so that students can explore architecture and learn about it in a dynamic way. This system demonstrates a new way of learning about architectural analysis through dynamic multimedia computer interaction.
keywords	Dynamic Multimedia System, Analytical Models, Interactive Pedagogical Resource
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ddssar0021
id	ddssar0021
authors	Orzechowski, M.A., Timmermans, H.J.P. and Vries, B. de
year	2000
title	Measuring user satisfaction for design variations through virtual reality
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	This paper describes Virtual Reality as an environment to collect information about user satisfaction. Because Virtual Reality (VR) allows visualization with added interactivity, this form of representation has particular advantages when presenting new designs. The paper reports on the development of a VR system that supports architects to collect opinions about their design alternatives in terms of user preferences. An alternative to conjoint analysis, that uses statistical choice variations to estimate user preference functions, is developed. Artificial Intelligence (AI) Agent technology will be implemented to build a model for data collection, prediction, and learning processes.
series	DDSS
last changed	2003/08/07 16:36

_id	3888
authors	Reffat, Rabee M.
year	2000
title	Computational Situated Learning in Designing - Application to Architectural Shape Semantics
source	The University of Sydney, Faculty of Architecture
summary	Learning the situatedness (applicability conditions), of design knowledge recognised from design compositions is the central tenet of the research presented in this thesis. This thesis develops and implements a computational system of situated learning and investigates its utility in designing. Situated learning is based on the concept that "knowledge is contextually situated and is fundamentally influenced by its situation". In this sense learning is tuned to the situations within which "what you do when you do matters". Designing cannot be predicted and the results of designing are not based on actions independent of what is being designed or independent of when, where and how it was designed. Designers' actions are situation dependent (situated), such that designers work actively with the design environment within the specific conditions of the situation where neither the goal state nor the solution space is completely predetermined. In designing, design solutions are fluid and emergent entities generated by dynamic and situated activities instead of fixed design plans. Since it is not possible in advance to know what knowledge to use in relation to any situation we need to learn knowledge in relation to its situation, i.e. learn the applicability conditions of knowledge. This leads towards the notion of the situation as having the potential role of guiding the use of knowledge. Situated Learning in Designing (SLiDe) is developed and implemented within the domain of architectural shape composition (in the form of floor plans), to construct the situatedness of shape semantics. An architectural shape semantic is a set of characteristics with a semantic meaning based on a particular view of a shape such as reflection symmetry, adjacency, rotation and linearity. Each shape semantic has preconditions without which it cannot be recognised. Such preconditions indicate nothing about the situation within which this shape semantic was recognised. The situatedness or the applicability conditions of a shape semantic is viewed as, the interdependent relationships between this shape semantic as the design knowledge in focus, and other shape semantics across the observations of a design composition. While designing, various shape semantics and relationships among them emerge in different representations of a design composition. Multiple representations of a design composition by re-interpretation have been proposed to serve as a platform for SLiDe. Multiple representations provide the opportunity for different shape semantics and relationships among them to be found from a single design composition. This is important if these relationships are to be used later because it is not known in advance which of the possible relationships could be constructed are likely to be useful. Hence, multiple representations provide a platform for different situations to be encountered. A symbolic representation of shape and shape semantics is used in which the infinite maximal lines form the representative primitives of the shape. SLiDe is concerned with learning the applicability conditions (situatedness), of shape semantics locating them in relation to situations within which they were recognised (situation dependent), and updating the situatedness of shape semantics in response to new observations of the design composition. SLiDe consists of three primary modules: Generator, Recogniser and Incremental Situator. The Generator is used by the designer to develop a set of multiple representations of a design composition. This set of representations forms the initial design environment of SLiDe. The Recogniser detects shape semantics in each representation and produces a set of observations, each of which is comprised of a group of shape semantics recognised at each corresponding representation. The Incremental Situator module consists of two sub-modules, Situator and Restructuring Situator, and utilises an unsupervised incremental clustering mechanism not affected by concept drift. The Situator module locates recognised shape semantics in relation to their situations by finding regularities of relationships among them across observations of a design composition and clustering them into situational categories organised in a hierarchical tree structure. Such relationships change over time due to the changes taken place in the design environment whenever further representations are developed using the Generator module and new observations are constructed by the Recogniser module. The Restructuring Situator module updates previously learned situational categories and restructures the hierarchical tree accordingly in response to new observations. Learning the situatedness shape semantics may play a crucial role in designing if designers pursue further some of these shape semantics. This thesis illustrates an approach in which SLiDe can be utilised in designing to explore the shapes in a design composition in various ways; bring designers! attention to potentially hidden features and shape semantics of their designs; and maintain the integrity of the design composition by using the situatedness of shape semantics. The thesis concludes by outlining future directions for this research to learn and update the situatedness of design knowledge within the context of use; considering the role of functional knowledge while learning the situatedness of design knowledge; and developing an autonomous situated agent-based designing system.
series	thesis:PhD
email
last changed	2003/05/06 11:34

_id	ee9a
authors	Viggiano, Mário and Linhares, Cícero
year	2000
title	Projeto de Arquitetura Assistido por Computador: Relato de uma experiência de aprendizagem (Computer Aided Architectural Design: Narrative of a Learning Experience)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 388-390
summary	The present work has evaluated, under a critic and prospective view, the didactical experience of a pioneer course, ministered in a Brazilian architecture university, during eleven months. This work will be developed in three parts: The first one evaluates the course paradigms, the way that they were approached, the structure, problems and solutions; the second one critically evaluates the works produced pointing the divergent and convergent points and, finally, in a conclusion form, a prospective analysis about the theory and method will be done in order to create a conceptual structure for a Computer Aided Design.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	430a
authors	Rheingold, H.
year	2000
title	The Virtual Community
source	MIT Press
summary	Cyberculture authority Howard Rheingold was the first to write about online communities in this style that is part-travelogue and part-anthropological guide. This groundbreaking classic explores the entire virtual community, beginning with a selective but probing look at the author's original online home, The Well. Rheingold relates plenty of anecdotes that demonstrate the upsides of online life, such as how he was able to get information on removing a tick from his child before his doctor could respond to his phone call. But the bulk of the material relates to how individuals interact online much as they do in a face-to-face community. Rheingold speaks to how both friendships and enmities are formed online and how people come together to support each other through misfortune. He gives the example of how computer-moderated communication enabled members of one Well community to send vital medical aid to a friend hospitalized halfway around the world. Rheingold goes on to show how communities can form by various electronic communication methods, using the conferencing system of The Well as one example. He also examines how people interact through mailing lists, live chat, and the fantasy cyberenvironments of online role-playing games. In the process, he questions what kind of relationships can really be formed in a medium where people can change their apparent identity at will. This book questions whether a distinction between "virtual" communities and "real-life" communities is entirely valid. The Virtual Community argues that real relationships happen and real communities develop when people communicate upon virtual common ground. Rheingold also shares his far-reaching knowledge of how technology effects our social constructs. If you are involved in an online community, here is your cultural heritage.
series	other
last changed	2003/04/23 15:14

_id	7da7
authors	Benedetti, Cristina and Salvioni, Giulio
year	1999
title	The Use of Renewable Resource in Architecture: New Teaching Methodologies
doi	https://doi.org/10.52842/conf.ecaade.1999.751
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 751-756
summary	The program is organized into four parts. Each is very much connected, both logically and methodologically, so that the unit as a whole consists of a content and method of access that are not divided up. This method is not in a chronological order that simply goes in one direction, rather it allows the user to "refer back", in real time and in different directions. For the simple purpose of explanation, the sections of the program are listed as follows: (-) "Basic information" concerns the basics of bioclimatic and timber architecture. Without this knowledge, the other two sections would be difficult to understand; (-) "Actual buildings throughout the world"; give examples of architectural quality; they concretize the basics of bioclimatic and timber architecture; (-) "Students' Masters Theses", that follow on from the basic information and the learning experience "in the field", and guided by the lecturer, have a critical approach to actual buildings throughout the world. (-) A multimedia data-sheet organized to ensure a clear and straightforward presentation of information about the construction products. It relies on a tab-based navigation interface that gives users access to eight different stacked windows.
keywords	Architecture, Multimedia, Timber, Bioclimatic, Classification
series	eCAADe
email
last changed	2022/06/07 07:54

_id	9384
authors	Burry, M., Datta, S. and Anson, S.
year	2000
title	Introductory Computer Programming as a Means for Extending Spatial and Temporal Understanding
doi	https://doi.org/10.52842/conf.acadia.2000.129
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 129-135
summary	Should computer programming be taught within schools of architecture? Incorporating even low-level computer programming within architectural education curricula is a matter of debate but we have found it useful to do so for two reasons: as an introduction or at least a consolidation of the realm of descriptive geometry and in providing an environment for experimenting in morphological time-based change. Mathematics and descriptive geometry formed a significant proportion of architectural education until the end of the 19th century. This proportion has declined in contemporary curricula, possibly at some cost for despite major advances in automated manufacture, Cartesian measurement is still the principal ‘language’ with which to describe building for construction purposes. When computer programming is used as a platform for instruction in logic and spatial representation, the waning interest in mathematics as a basis for spatial description can be readdressed using a left-field approach. Students gain insights into topology, Cartesian space and morphology through programmatic form finding, as opposed to through direct manipulation. In this context, it matters to the architect-programmer how the program operates more than what it does. This paper describes an assignment where students are given a figurative conceptual space comprising the three Cartesian axes with a cube at its centre. Six Phileban solids mark the Cartesian axial limits to the space. Any point in this space represents a hybrid of one, two or three transformations from the central cube towards the various Phileban solids. Students are asked to predict the topological and morphological outcomes of the operations. Through programming, they become aware of morphogenesis and hybridisation. Here we articulate the hypothesis above and report on the outcome from a student group, whose work reveals wider learning opportunities for architecture students in computer programming than conventionally assumed.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ga0007
id	ga0007
authors	Coates, Paul and Miranda, Pablo
year	2000
title	Swarm modelling. The use of Swarm Intelligence to generate architectural form
source	International Conference on Generative Art
summary	.neither the human purposes nor the architect's method are fully known in advance. Consequently, if this interpretation of the architectural problem situation is accepted, any problem-solving technique that relies on explicit problem definition, on distinct goal orientation, on data collection, or even on non-adaptive algorithms will distort the design process and the human purposes involved.' Stanford Anderson, "Problem-Solving and Problem-Worrying". The works concentrates in the use of the computer as a perceptive device, a sort of virtual hand or "sense", capable of prompting an environment. From a set of data that conforms the environment (in this case the geometrical representation of the form of the site) this perceptive device is capable of differentiating and generating distinct patterns in its behavior, patterns that an observer has to interpret as meaningful information. As Nicholas Negroponte explains referring to the project GROPE in his Architecture Machine: 'In contrast to describing criteria and asking the machine to generate physical form, this exercise focuses on generating criteria from physical form.' 'The onlooking human or architecture machine observes what is "interesting" by observing GROPE's behavior rather than by receiving the testimony that this or that is "interesting".' The swarm as a learning device. In this case the work implements a Swarm as a perceptive device. Swarms constitute a paradigm of parallel systems: a multitude of simple individuals aggregate in colonies or groups, giving rise to collaborative behaviors. The individual sensors can't learn, but the swarm as a system can evolve in to more stable states. These states generate distinct patterns, a result of the inner mechanics of the swarm and of the particularities of the environment. The dynamics of the system allows it to learn and adapt to the environment; information is stored in the speed of the sensors (the more collisions, the slower) that acts as a memory. The speed increases in the absence of collisions and so providing the system with the ability to forget, indispensable for differentiation of information and emergence of patterns. The swarm is both a perceptive and a spatial phenomenon. For being able to Interact with an environment an observer requires some sort of embodiment. In the case of the swarm, its algorithms for moving, collision detection, and swarm mechanics conform its perceptive body. The way this body interacts with its environment in the process of learning and differentiation of spatial patterns constitutes also a spatial phenomenon. The enactive space of the Swarm. Enaction, a concept developed by Maturana and Varela for the description of perception in biological terms, is the understanding of perception as the result of the structural coupling of an environment and an observer. Enaction does not address cognition in the currently conventional sense as an internal manipulation of extrinsic 'information' or 'signals', but as the relation between environment and observer and the blurring of their identities. Thus, the space generated by the swarm is an enactive space, a space without explicit description, and an invention of the swarm-environment structural coupling. If we consider a gestalt as 'Some property -such as roundness- common to a set of sense data and appreciated by organisms or artefacts' (Gordon Pask), the swarm is also able to differentiate space 'gestalts' or spaces of some characteristics, such as 'narrowness', or 'fluidness' etc. Implicit surfaces and the wrapping algorithm. One of the many ways of describing this space is through the use of implicit surfaces. An implicit surface may be imagined as an infinitesimally thin band of some measurable quantity such as color, density, temperature, pressure, etc. Thus, an implicit surface consists of those points in three-space that satisfy some particular requirement. This allows as to wrap the regions of space where a difference of quantity has been produced, enclosing the spaces in which some particular events in the history of the Swarm have occurred. The wrapping method allows complex topologies, such as manifoldness in one continuous surface. It is possible to transform the information generated by the swarm in to a landscape that is the result of the particular reading of the site by the swarm. Working in real time. Because of the complex nature of the machine, the only possible way to evaluate the resulting behavior is in real time. For this purpose specific applications had to be developed, using OpenGL for the Windows programming environment. The package consisted on translators from DXF format to a specific format used by these applications and viceversa, the Swarm "engine", a simulated parallel environment, and the Wrapping programs, to generate the implicit surfaces. Different versions of each had been produced, in different stages of development of the work.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	0cc1
authors	Dave, Bharat and Danahy, John
year	2000
title	Virtual study abroad and exchange studio
source	Automation in Construction 9 (1) (2000) pp. 57-71
summary	The digital design studio has an area of application where conventional media are incapable of being used; collaboration in learning, design and dialogue with people in places other than where one lives. This distinctive opportunity has lead the authors to explore a form of design brief and virtual design studio (VDS) format not well addressed in the literature. Instead of sharing the same design brief, students in this alternative format design a project in the other students' city and do not collaborate on the same design. Collaboration with other students takes the form of teaching each other about the city and culture served by the design. The authors discovered these studios produce a focus on site context that serves our pedagogical objectives – a blend of architectural, landscape architectural and urban design knowledge. Their students use a range of commercial CAD and computer supported collaborative work (CSCW) software common to that used in many VDS experiments reported on in the literature.However, this conventional use of technology is contrasted with a second distinctive characteristic of these studios, the use of custom software tools specifically designed to support synchronous and asynchronous three-dimensional model exchange and linked attribute knowledge. The paper analyzes some of the virtual design studio (VDS) work between the Swiss Federal Institute of Technology, the University of Toronto, and the University of Melbourne. The authors articulate a framework of VDS dimensions that structures their teaching and research.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	a153
id	a153
authors	d’Estrée Sterk, Tristan
year	2000
title	The Synthetic Dialect And Cybernetic Architectural Form
source	Emerging Technologies and Design: The Intersection of Design and Technology. Proceedings of the 2000 ACSA Technology Conference, MIT Cambridge (Massachusetts) 4-7 July 2000, pp.117-122
summary	Recently a significant philosophical split has appeared within the discipline of architecture. The split exists because the architectural profession is adopting a new digital framework, from which it can challenge the traditional cultural and technical pursuits of the discipline. This paper is about this split within the profession and about using it to develop challenging contemporary architectural forms that work to fill the ‘gap.’ So where does the split come from? Our discipline and its associated discourses have over time been informed by the technologies used to construct it, design it, and mediate it, but also constrained by these things and our understandings of them. With this in mind, one can realize that it is the technologies of the time that in fact shape the philosophical positions and styles adopted by both individual designers and entire genres. This gap isn’t an easy thing to pin down. It takes on several forms all of which seem to stem from the same source, that being the influence of information constructs on space. If anything this paper aims to uncover the differences and similarities of these constructs, and use them to understand the digital genre that presently surrounds us.
keywords	Synthetic Form, Information And Space, Modernism, Cybernetic Architectural Form
series	other
type	normal paper
email
more	admin
last changed	2017/04/10 13:08

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	567d
authors	Farrag, C., Pinna Braga, F. and Teixeira, P.
year	2000
title	Investigação de Metodologia de Ensino de Informática Aplicada à Arquitetura (Research on the Methodology for Teaching Computer Applications in Architecture)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 347-349
summary	Description of class research from 1997-2 to 2000-1 in “Applied Computing in Architecture” conducted in the sixth semester of the Architecture Program at Faculdade de Belas Artes de São Paulo. The study is intended to analyze, evaluate and discover new paradigms in the introduction/application of class methodologies of teaching the use of computer in the design process. Our intention is to verify the students natural understanding of the principles of 3D digital modeling by introducing new tools for defining space and form, using the computer as a communication/representation system, and not only as a mimetized production tool. The challenge was to find a natural syntony between the digital projectual process and the learning process. At the end of each semester we evaluated the results and redirected the class proposals.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	2076
authors	Holmgren, Steen and Rüdiger, Bjarne
year	1999
title	IT in Urban Regeneration Projects
doi	https://doi.org/10.52842/conf.ecaade.1999.708
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 708-713
summary	This paper is about the development of new tools for the residents to use for participation in the planning process and by the professional generating proposals for projects. It deals with two actual research projects, which might be described as transition projects. The projects are Digital 3D City Model of Copenhagen and Urban Architecture in Urban Renewal, - in dialogue between professionals and residents. These projects take their point of departure in the architects traditional working methods and working tools, but they focus on new methods for the dialogue between professionals and inhabitants and on a new visual language based on the digital technology. In this transition situation we see the educated architect as well as the politician and the inhabitant as students in a common learning process. In the end of the paper we introduce a planned project about IT in Urban Renewal. The project is based on an ongoing governmental experiment with involving inhabitants actively in the renewal of their urban area. This project is intended to combine dialogue methods with the use of interactive 3D-digital City models on the Internet.
keywords	3D City modeling, Urban Regeneration, Participation, Dialogue Method, 3D Digital City Model, Urban Architecture
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cf2009_poster_09
id	cf2009_poster_09
authors	Hsu, Yin-Cheng
year	2009
title	Lego Free-Form? Towards a Modularized Free-Form Construction
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	Design Media is the tool designers use for concept realization (Schon and Wiggins, 1992; Liu, 1996). Design thinking of designers is deeply effected by the media they tend to use (Zevi, 1981; Liu, 1996; Lim, 2003). Historically, architecture is influenced by the design media that were available within that era (Liu, 1996; Porter and Neale, 2000; Smith, 2004). From the 2D plans first used in ancient egypt, to the 3D physical models that came about during the Renaissance period, architecture reflects the media used for design. When breakthroughs in CAD/CAM technologies were brought to the world in the twentieth century, new possibilities opened up for architects.
keywords	CAD/CAM free-form construction, modularization
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	b151
authors	Hubbell, Jeremy and Boardman, Ted
year	2000
title	Inside 3D Studio VIZ 3
source	New Riders
summary	Taking what you know about design, form, and composition in the real world and translating it into the digital realm can be a significant challenge. If you're looking to make the most of 3D Studio VIZ, this book is the perfect companion. The concepts and tutorials contained within are proven in the field: they address specific issues raised in 3D Studio VIZ courses throughout the country. Inside 3D Studio VIZ 3 explains VIZ like no other learning resource. The projects- and tutorials-based approach takes you beyond tool-related issues and urges you to think "what if?"
series	other
last changed	2003/02/26 18:58

_id	b5f3
authors	Johnson, Brian R.
year	2000
title	Sustaining Studio Culture: How Well Do Internet Tools Meet the Needs of Virtual Design Studios?
doi	https://doi.org/10.52842/conf.ecaade.2000.015
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 15-22
summary	The Internet beckons seductively to students. The prospect of nearly instantaneous communication with acquaintances spread across the face of the earth is alluring. The ease with which rich graphical content can be made available to the world is stunning. The possibility of a design being seen by friends, family, and famous architects is tantalizing. Faculty are drawn by the potent synergy and learning that can be found in the opposition and cooperation of different cultural roots. It is probable that entire design studio sequences will be offered through distance-learning programs in the near future. Is that a good idea? Much has been written about "virtual design studios" in architecture schools and "virtual offices" in practice. Most offices have largely or totally abandoned drafting boards in favor of digital tools of production. Yet, regarding design, Ken Sanders, author of The Digital Architect, and Manager of Information Services at Zimmer Gunsul Frasca Partnership (ZGF), of Portland, Oregon, has written "we still make an effort to locate project teams together and always will". Production CAD work requires different kinds of interaction than design and design instruction. The experiments have been invaluable in developing strategies for use of the Internet as a component of a design studio series, but rarely depend entirely on use of the Internet for all course communications. In fact, most describe fairly isolated efforts to augment some aspect of traditional design environments using Internet tools (ftp, email, web). A few have implemented new pedagogic or collaboration paradigms (e.g., ETH’s phase(x)). This paper considers the traditional design studio in terms of formal and informal activities, characterizes the major Internet technologies with regard to the resulting interaction issues. In particular, it describes an area of informal work group communications that appears to be ill-supported with existing tools. The paper goes on to describe a web-based collaboration tool which was developed to address the need for less formal communication. The context for this development is the concept of a fully distributed collaboration environment with particular attention to questions of informal communication. Finally, it describes how the tool was deployed in an experimental "web studio" setting and student responses to use of the tool.
keywords	Virtual Design Studio, Collaboration, Online Communities, Web Tools
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:52

For more results click below: