Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 347

Reformat results as: short short into frame detailed detailed into frame

_id	60e7
authors	Bailey, Rohan
year	2000
title	The Intelligent Sketch: Developing a Conceptual Model for a Digital Design Assistant
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 137-145
doi	https://doi.org/10.52842/conf.acadia.2000.137
summary	The computer is a relatively new tool in the practice of Architecture. Since its introduction, there has been a desire amongst designers to use this new tool quite early in the design process. However, contrary to this desire, most Architects today use pen and paper in the very early stages of design to sketch. Architects solve problems by thinking visually. One of the most important tools that the Architect has at his disposal in the design process is the hand sketch. This iterative way of testing ideas and informing the design process with images fundamentally directs and aids the architect’s decision making. It has been said (Schön and Wiggins 1992) that sketching is about the reflective conversation designers have with images and ideas conveyed by the act of drawing. It is highly dependent on feedback. This “conversation” is an area worthy of investigation. Understanding this “conversation” is significant to understanding how we might apply the computer to enhance the designer’s ability to capture, manipulate and reflect on ideas during conceptual design. This paper discusses sketching and its relation to design thinking. It explores the conversations that designers engage in with the media they use. This is done through the explanation of a protocol analysis method. Protocol analysis used in the field of psychology, has been used extensively by Eastman et al (starting in the early 70s) as a method to elicit information about design thinking. In the pilot experiment described in this paper, two persons are used. One plays the role of the “hand” while the other is the “mind”- the two elements that are involved in the design “conversation”. This variation on classical protocol analysis sets out to discover how “intelligent” the hand should be to enhance design by reflection. The paper describes the procedures entailed in the pilot experiment and the resulting data. The paper then concludes by discussing future intentions for research and the far reaching possibilities for use of the computer in architectural studio teaching (as teaching aids) as well as a digital design assistant in conceptual design.
keywords	CAAD, Sketching, Protocol Analysis, Design Thinking, Design Education
series	ACADIA
last changed	2022/06/07 07:54

_id	93ff
authors	Chateau, H.B., Alvarado, R.G., Vergara, R.L. Parra Márquez, J.C.
year	2000
title	Un Modelo Experimental em el Espacio-Tiempo de la Realidad Virtual (An Experimental Model in the Space-Time of Virtual Reality)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 251-253
summary	Virtual environments are a convergence between communicational media and computational capacities, that progressively integrate in interactive and global systems. This technological evolution has been progressively creating artificial contexts that find their latest and most integral expression in virtual environments. The influence of virtual worlds in our culture questions architecture, and arises the challenge of understanding the approach that should exist from architecture into virtual reality. This paper consists on an experimental exercise in virtual time-space oriented to the news information (News Information Centre), recognising that a relevant architectural event of our time is that virtual worlds represent a meeting between communicational technologies and the interest of contemporary society on being always informed (on line). This project is basically an exploration of virtual design that widens the professional field of architectural study, into the new technological and cultural challenges, that will probably influence significantly on the relations between architecture and urban culture.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	1e1b
authors	Svilanovich Zaldumbide, Paulina A.
year	2000
title	Arquitectura Mediatica: De lo temporal a lo espacial de lo colectivo a lo virtual (Architecture of Media: From the Time-Base to the Space-Base, From the Colective to the Virtual)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 84-89
summary	The objective of this investigation is to explore in the digital configuration and to discuss its implications, inspirations and applications. This investigation intends a design method to be applied spacely in what we have called the re-interpretation of the space experienciable, to drive the project but well toward the production of “scenarios” able to harbor the unpredictability of the civic eventses, fomenting a such organization that articulates the one among of non physical spaces. As final product five “scenarios“ were created (new experiencial virtual experenciable), using technical film in their methodological development where is recognized in the process their qualities and possible bonds, then in a final stage the inter-relationship among the methodological constants generates and feedback the general proposal: The inductive sequence of the ASSEMBLY (expressed through animations), understanding this last concept like the paradigm of the film development applied in this occasion to the architectural proposal.
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	20ab
authors	Yakeley, Megan
year	2000
title	Digitally Mediated Design: Using Computer Programming to Develop a Personal Design Process
source	Massachusetts Institute of Technology, Department of Architecture
summary	This thesis is based on the proposal that the current system of architectural design education confuses product and process. Students are assessed through, and therefore concentrate on, the former whilst the latter is left in many cases to chance. This thesis describes a new course taught by the author at MIT for the last three years whose aim is to teach the design process away from the complexities inherent in the studio system. This course draws a parallel between the design process and the Constructionist view of learning, and asserts that the design process is a constant learning activity. Therefore, learning about the design process necessarily involves learning the cognitive skills of this theoretical approach to education. These include concrete thinking and the creation of external artifacts to develop of ideas through iterative, experimental, incremental exploration. The course mimics the Constructionist model of using the computer programming environment LOGO to teach mathematics. It uses computer programming in a CAD environment, and specifically the development of a generative system, to teach the design process. The efficacy of such an approach to architectural design education has been studied using methodologies from educational research. The research design used an emergent qualitative model, employing Maykut and Morehouses interpretive descriptive approach (Maykut & Morehouse, 1994) and Glaser and Strausss Constant Comparative Method of data analysis (Glaser & Strauss, 1967). Six students joined the course in the Spring 1999 semester. The experience of these students, what and how they learned, and whether this understanding was transferred to other areas of their educational process, were studied. The findings demonstrated that computer programming in a particular pedagogical framework, can help transform the way in which students understand the process of designing. The following changes were observed in the students during the course of the year: Development of understanding of a personalized design process; move from using computer programming to solve quantifiable problems to using it to support qualitative design decisions; change in understanding of the paradigm for computers in the design process; awareness of the importance of intrapersonal and interpersonal communication skills; change in expectations of, their sense of control over, and appropriation of, the computer in the design process; evidence of transference of cognitive skills; change from a Behaviourist to a Constructionist model of learning Thesis Supervisor: William J. Mitchell Title: Professor of Architecture and Media Arts and Sciences, School of Architecture and Planning
series	thesis:PhD
last changed	2003/02/12 22:37

_id	37c2
authors	Ahmad Rafi, M.E.
year	1999
title	Visualisation of Design Using Animation for Virtual Prototyping
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 519-525
doi	https://doi.org/10.52842/conf.ecaade.1999.519
summary	Although recent technology in time-based representation has vastly improved, animation in virtual prototype design field remains the same. Some designers invest a huge amount of money in the latest visualisation and multimedia technology and yet may create even worse animation. They often cramp sequences resulting in many viewers failing to interpret the design positively as they miss a lot of vital information that explains the design. This paper basically reports the importance of film-making understanding for producing good virtual prototype animation. It will be based on a part of a research project on the use of time-based media in architectural practices. It also includes an empirical analysis of several architectural-based documentary films (including an interview with the film director) and past and present computer animation. This paper then concludes with recommendations of good techniques for making animated visualisation relative to the stage at which the animation is produced for better design decision.
keywords	Virtual Prototype, Animation, Time-Based, Film-Making
series	eCAADe
email
last changed	2022/06/07 07:54

_id	5cba
authors	Anders, Peter
year	1999
title	Beyond Y2k: A Look at Acadia's Present and Future
source	ACADIA Quarterly, vol. 18, no. 1, p. 10
doi	https://doi.org/10.52842/conf.acadia.1999.x.o3r
summary	The sky may not be falling, but it sure is getting closer. Where will you when the last three zeros of our millennial odometer click into place? Computer scientists tell us that Y2K will bring the world’s computer infrastructure to its knees. Maybe, maybe not. But it is interesting that Y2K is an issue at all. Speculating on the future is simultaneously a magnifying glass for examining our technologies and a looking glass for what we become through them. "The future" is nothing new. Orwell's vision of totalitarian mass media did come true, if only as Madison Avenue rather than Big Brother. Futureboosters of the '50s were convinced that each garage would house a private airplane by the year 2000. But world citizens of the 60's and 70's feared a nuclear catastrophe that would replace the earth with a smoking crater. Others - perhaps more optimistically -predicted that computers were going to drive all our activities by the year 2000. And, in fact, theymay not be far off... The year 2000 is symbolic marker, a point of reflection and assessment. And - as this date is approaching rapidly - this may be a good time to come to grips with who we are and where we want to be.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	fbcb
authors	Anders, Peter
year	2000
title	Places of Mind: Implications of Narrative Space for the Architecture of Information Environments
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 85-89
doi	https://doi.org/10.52842/conf.acadia.2000.085
summary	Virtual reality and cyberspace are extended spaces of the mind different from, yet related to, the spaces of fiction and ancient myth. These earlier spaces reveal how electronic media, too, may come to define our selves and our culture. Indeed, a better understanding of how we use space to think can lead to the design of better information environments. This paper will describe a range of traditional narrative spaces, revealing their varied relationships with the physical world. It will demonstrate the purposes of such spaces and how their function changes with their level of abstraction. A concluding review of current technologies will show how electronic environments carry on the traditions of these spaces in serving our cultural and psychological needs.
keywords	Cyberspace, Narrative, Space, Anthropic Cyberspace, Cybrids
series	ACADIA
email
last changed	2022/06/07 07:54

_id	0c0d
authors	Asanowicz, Aleksander
year	2000
title	Computer as an Metaphorisation Machine
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 283-286
doi	https://doi.org/10.52842/conf.ecaade.2000.283
summary	Digital media is transforming the practice and teaching of design. Information technologies offer not only better production and rendering tools but also the ability to model, manipulate, and understand design in new ways. A new era in CAAD has started. One of the aspects of this situation is the increase in the number of computers in design offices and architectural schools (many of our students have their own computers, which a re often better than the computers we have at our school). We can submit a proposition that the critical point in the creative use of computers is over, and we should think how computers and new media may extend the designer’s perception and imagination.
keywords	Creation of a Form, Imagination, Metaphors, Computer Support of Form Searching
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	c42a
authors	Bermudez, J., Agutter, J., Brent, L., Syroid, N., Gondeck-Becker, D., Westenskow, D., Foresti, S. and Sharir, Y.
year	2000
title	Cyberprint: Toward an Architecture of Being
source	ACADIA Quarterly, vol. 19, no. 3, pp. 8-12
doi	https://doi.org/10.52842/conf.acadia.2000.008
summary	This project involves the design, construction and performance of an “architecture of being” that expresses selfhood in virtual space and real time using: (1) physiological data as its building material, (2) architectural design as its expressive intent, (3) digital space as its medium, (4) screen projection as its enveloping and viewing technique, (5) user interactivity and performance as its partner, and (6) interdisciplinary collaborations among Architecture, Choreography, Modern Dance, Music, Bioengineering, Medicine and Computer Science as its creative and technical contexts. The paper presents the implementation of the cyberPRINT during a series of techno-media performances at the Rose Wagner Performing Art Center in Salt Lake City, USA, in May 2000. This work is believed to be the first of its kind in the world. The cyberPRINT is building a new area of creative inquiry in Architecture by means of collaborations with the Arts and Sciences.
keywords	Performance; Data Visualization; Interdisciplinary; Virtual; Architecture
series	ACADIA
email
last changed	2022/06/07 07:52

_id	95b0
authors	Bermudez, J., Agutter, J., Lilly,. B., Syroid, N., Westenskow, D., Gondeck-Becker, D. Foresti, S. and Sharir, Y.
year	2000
title	CyberPRINT: Hacia una Arquitectura del Ser (CyberPRINT: Towards an Architecture of the Being)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 220-223
summary	This project involves the design, construction and performance of an “architecture of being” that expresses selfhood in virtual space and real time using: (1) physiological data as its building material, (2) architectural design as its expressive intent, (3) digital space as its medium, (4) screen projection as its enveloping and viewing technique, (5) user interactivity and performance as its partner, and (6) interdisciplinary collaborations among Architecture, Choreography, Modern Dance, Music, Bioengineering, Medicine and Computer Science as its creative and technical contexts. // The paper presents the implementation of the cyberPRINT during a series of techno-media performances at the Rose Wagner Performing Art Center in Salt Lake City, USA, in May 2000. This work is believed to be the first of its kind in the world. The cyberPRINT is building a new area of creative inquiry in Architecture by means of collaborations with the Arts and Sciences.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	3f35
authors	Bermudez, Julio and King, Kevin
year	2000
title	Media interaction and design process: establishing a knowledge base
source	Automation in Construction 9 (1) (2000) pp. 37-56
summary	Integrating computers in architectural design means to negotiate between centuries-old analog design methods and the new digital systems of production. Analog systems of architectural production use tracing paper, vellum, graphite and ink, clipboard, clay, balsa wood, plastic, metal, etc. Analog systems have also been termed "handmade", "manual", "material" or "physical". Digital systems of architectural production use scanning, image manipulation, visualization, solid modeling, computer aided drafting, animation, rendering, etc. Digital systems have also been called "electronic", "computer-aided", "virtual", etc. The difficulty lies in the underdeveloped state of the necessary methods, techniques, and theories to relate traditional and new media. Recent investigations on the use of multiple iterations between manual and electronic systems to advance architectural work show promising results. However, these experiments have not been sufficiently codified, cross-referenced and third party tested to conform a reliable knowledge base. This paper addresses this shortcoming by bringing together reported experiences from diverse researchers over the past decade. This summary is informed by more than three years of continuous investigation in the impacts of analog-digital conversations in the design process. The goal is to establish a state-of-the-art common foundation that permits instructors, researchers and practitioners to refer to, utilize, test, criticize and develop. An appendix is included providing support for the paper's arguments.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	f288
authors	Bille, Pia
year	1999
title	Integrating GIS and Electronic Networks In Urban Design and Planning
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
doi	https://doi.org/10.52842/conf.ecaade.1999.722
summary	In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords	Urban Planning, Electronic Collaboration, GIS, Data Bases
series	eCAADe
email
last changed	2022/06/07 07:54

_id	f2f1
authors	Breen, Jack and Nottrot, Robert
year	2000
title	Project a2W. A Dialogue on New Media Perspectives
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 291-296
doi	https://doi.org/10.52842/conf.ecaade.2000.291
summary	This paper documents an initiative taking the form of a "dialogue". The format which has been developed is somewhat similar to that of the "conversation" which Mondrian conceived in 1919, taking place between two fictitious characters - A and B - discussing the new direction in art, which he called "Nieuwe Beelding" and which contributed to the "De Stijl" movement (the dialogue was followed later that year by a "trialogue" between X, Y and Z on a virtual walk taking them from the countryside to the city) 1 . This time the issue is not so much the evolvement of a new artistic or architectural style, but the role of "new media" in architecture... The present dialogue takes place between two fictitious media proponents ("Alpha" and "Omega"). They take turns questioning several issues and exchanging proposals... What are the values - and the promises - of computer supported instruments in creative design and research - concerning the art and science shaping the built environment? How do the present applications measure up, how do they compare to the expectations and ambitions expressed a number of years ago? The form of a dialogue means that issues and ideas, which are not often aired within the confines of academic discourse, can be played back and forth and a measure of exaggeration was intended from the beginning... This contribution does not in any way pretend to be all-inclusive. Rather, the paper is meant to put forward ideas and experiences - from the perspective of the Delft Media group, in practice, in teaching and in research - which may stimulate (or even irritate?) but will hopefully activate. The aim is to open up discussions, to allow other (hidden) agendas for the future to become more visible and to look for platforms for sharing concepts and fascinations, however improbable they might be...
keywords	A Dialogue on New Media
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	1206
authors	Cabezas, M., Mariano, C., Mitolo, S. and Oliva, S.
year	1999
title	Transformaciones en el Proceso Enseñanza-Aprendizaje de la Geometría Descriptiva con la Apliacación de los Medios Digitales (Transformations in the Teaching/Learning Process of Descriptive Geometry with the Aplplication of Digital Media)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 347-348
summary	The insert of the digital technologies in the atmosphere Áulico has left generalizing in a significant way. An example constitutes it the high percentage of students that they manifested general knowledge in the software handling in the introductory course of visual communication, as well as the voluntary presentation of practical works developed with digital means. The necessity of an answer to the requirements that arise of the students sinks to the certainty of a pedagogic compatibility among the matter to try and the teaching attended by the personal computer that would increase the Iconidad and the understanding of a topic of certain complexity like it is the geometry of the space. An educational program designed for the teaching of the Sistema Monge whose general characteristics were presented in the II Ibero-American Seminar of Digital Graph and that it will be applied as experience pilot in the course 2000, it will allow us to respond to the following queries: what place it will be given to the educational program in the formation process in connection with the other pedagogic means.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	08ea
authors	Clayton, Mark J. and Vasquez de Velasco, Guillermo P. (Eds.)
year	2000
title	ACADIA 2000: Eternity, Infinity and Virtuality in Architecture
source	Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8 / Washington D.C. 19-22 October 2000, 284 p.
doi	https://doi.org/10.52842/conf.acadia.2000
summary	Eternity, time without end, infinity, space without limits and virtuality, perception without constraints; provide the conceptual framework in which ACADIA 2000 is conceived. It is in human nature to fill what is empty and to empty what is full. Today, thanks to the power of computer processing we can also make small what is too big, make big what is too small, make fast what is too slow, make slow what is too fast, make real what does not exist, and make our reality omni-present at global scale. These are capabilities for which we have no precedents. What we make of them is our privilege and responsibility. Information about a building flows past our keyboards and on to other people. Although we, as architects, add to the information, it originated before us and will go beyond our touch in time, space and understanding. A building description acquires a life of its own that may surpass our own lives as it is stored, transferred, transformed, and reused by unknown intellects, both human and artificial, and in unknown processes. Our actions right now have unforeseen effects. Digital media blurs the boundaries of space, time and our perception of reality. ACADIA 2000 explores the theme of time, space and perception in relation to the information and knowledge that describes architecture. Our invitation to those who are finding ways to apply computer processing power in architecture received overwhelming response, generating paper submissions from five continents. A selected group of reviewers recommended the publication of 24 original full papers out of 42 submitted and 13 short papers out of 30 submitted. Forty-two projects were submitted to the Digital Media Exhibit and 12 were accepted for publication. The papers cover subjects in design knowledge, design process, design representation, design communication, and design education. Fundamental and applied research has been carefully articulated, resulting in developments that may have an important impact on the way we practice and teach architecture in the future.
series	ACADIA
email
more	www.acadia.org
last changed	2022/06/07 07:49

_id	ddssar0008
id	ddssar0008
authors	Coyne, R., Lee, J. and Ofluoglu, S.
year	2000
title	E-commerce and on-line product information
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	The spread of the Internet has spurred the recent growth in e-commerce. E-commerce impinges on design in many ways, not least in encouraging the development of new tools for the presentation of product information: that is, information about the products that are used in design projects. (In the case of building design this might include information about standard doors, windows and fittings.) In this paper we present our development of three experimental tools for presenting and organising product information. The tools represent stages in the evolution of a prototype we call PLA(id) (Product Library Assistant – Intranet for Designers) involving the use of multimedia authoring, Java, and mobile computing. We discuss our experimental prototypes under several headings derived from what are commonly considered the key features of e-commerce: the marketplace, collaboration (the electronic marketplace as a community), geography (and geographical boundaries), navigation, regulation, integration and media (how in some cases e-commerce provides both the medium of transaction and the medium of delivery). So this account of our experimentation with product information tools provides a way of reviewing issues raised by e-commerce and their importance for design decision support systems.
series	DDSS
last changed	2003/08/07 16:36

_id	0cb1
authors	Dave, Bharat
year	2000
title	Architecture of Digital Imagination
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 297-306
doi	https://doi.org/10.52842/conf.caadria.2000.297
summary	Digital technologies extend, displace or substitute entirely new elements into what has been observed so far in the traditional modes of conception, representation and communication of design. This paper examines various characteristics of digital media and representations, their impacts- constraining and liberating- on modes of conception in design, and possible shifts in design expressions and ways of designing. While much effort invested in research to date has relied upon architecture as conceived, taught and communicated in traditional modes, the use of digital technologies changes those very premises. The import of such characterisation for design computation research is to highlight emerging agendas for future investigation.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	5477
authors	Donath, D., Kruijff, E., Regenbrecht, H., Hirschberg, U., Johnson, B., Kolarevic, B. and Wojtowicz, J.
year	1999
title	Virtual Design Studio 1998 - A Place2Wait
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 453-458
doi	https://doi.org/10.52842/conf.ecaade.1999.453
summary	This article reports on the recent, geographically and temporally distributed, intercollegiate Virtual Design Studio based on the 1998 implementation Phase(x) environment. Students participating in this workshop had to create a place to wait in the form of a folly. This design task was cut in five logical parts, called phases. Every phase had to be finished within a specific timeframe (one day), after which the results would be stored in a common data repository, an online MSQL database environment which holds besides the presentations, consisting of text, 3D models and rendered images, basic project information like the descriptions of the phases and design process visualization tools. This approach to collaborative work is better known as memetic engineering and has successfully been used in several educational programs and past Virtual Design Studios. During the workshop, students made use of a variety of tools, including modeling tools (specifically Sculptor), video-conferencing software and rendering programs. The project distinguishes itself from previous Virtual Design Studios in leaving the design task more open, thereby focusing on the design process itself. From this perspective, this paper represents both a continuation of existing reports about previous Virtual Design Studios and a specific extension by the offered focus. Specific attention will be given at how the different collaborating parties dealt with the data flow and modification, the crux within a successful effort to cooperate on a common design task.
keywords	Collaborative design, Design Process, New Media Usage, Global Networks
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2006_k004
id	sigradi2006_k004
authors	Dutta Madhu C.
year	2006
title	The Myth of Cyberspace: Towards a New Technopolis
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 41-44
summary	Professor Madhu C. Dutta has worked professionally as an urban planner and architect and was an Assistant Professor of Architecture at the University of Texas at San Antonio before coming to Wentworth. She teaches a broad range of courses, from design studio and architectural history through digital media and advanced computer applications for architectural design. Some of her most significant works include a city-wide urban riverfront design project in Varanasi, India, and “Solar Sails” a renewable energy design for the U.S. Department of Energy competition (2000) for which she was awarded the second prize among 110 entries. She has presented her scholarly work at conferences in Asia, Europe, Latin America, and the U.S. Her research interests are eclectic; she has recently been exploring the expansion of our notions of architectural space to include hybridized and virtual milieus in the “new frontier” of digital architecture. Professor Dutta is deeply committed to the creative and performing arts as well. She studied and performed Indian classical dance for sixteen years. She holds a BArch from the Manipal Institute of Technology of Mangalore University, and a Master’s in Architecture, specializing in Urban Design, from the University of Texas at Austin.
keywords	Technopolis, cyberspace, future, digital society
series	SIGRADI
type	keynote paper
email
last changed	2016/03/10 09:50

For more results click below: